[Q] earbud mic not working - AT&T, Rogers HTC One X, Telstra One XL

I flashed CM10 12/15 nightly 2 days ago, so far everything seems to be working fine except the mic on my earbud. It's a standard iPhone earbud with built-in mic, I was able to make calls with it when I was using stock HTC rom, but with CM10 the other end is not able to hear me. Any ideas?
Thank you!

i haven't using CM for a while, my guess is that it's probably an issue with the nightly. flash a newer one or find a more stable rom (cm10 nightlies arent meant to be stable).
another thing you could do is try an app called "SoundAbout" which fixes the headset routing.

Related

[Q] A question about ICS roms

So I recently got Cyanogenmod 9 for my Sensation and I love it so much! However, I do in fact have one concern. Is there any way to fix the audio routing issue? Are there certain ICS Roms out there that don't have this issue? I flashed over from ARHD because of Bluetooth stack issues, that was good enough reason as it is. Now I have a whole-nother problem.
Every time I use an apparently that uses a microphone, the audio gets VERY quiet! Almost inaudible! I know that the Nightly CM builds currently have this issue, but are there any other stable ICS Tom's out there that don't have this issue? I love ICS a lot and don't want to abandon it. If I end up leaving CM until a stable build is released? Fine. But for now, I'd really appreciate some input to see if there is a way around all of this.
Thanks.
I use Ordroid with sense4 and I can confirm that the Mic works fine. Speaker is loud on speaker options. I don't have that issue. It's a Ics rom with sense4. It's a excellent rom however tethering does not work. Other than that It's fast and stable . Lots of customization options , aroma installer, and tweaks. I personally love it. You might want to try it if you can't find a fix.
Sent from my HTC Sensation 4G using xda premium
Does Bluetooth work? How about wifi hotspots? I use Sixaxis controller ALOT and want to make sure I can keep it that way. So Ordroid goes back to the original Sense look?
Bluetooth works on Ordroid, so i suppose six axis should work pretty well without an issue. as for WiFi hotspot, yes it does work, although wired tether doesn't.
the look of sense on it is sense 4, latest sense by hTC...that can be found on the One series.

Verizon CM10 Nightlies

Installed the most recent nightly Jellybean for Verizon. Seems stable but I notice what seems to be degraded sound quality on phone calls. Anyone else having that issue?
Can someone more experienced recommend a better (or preferred build)?
Thanks,
Stormer1981 said:
Installed the most recent nightly Jellybean for Verizon. Seems stable but I notice what seems to be degraded sound quality on phone calls. Anyone else having that issue?
Can someone more experienced recommend a better (or preferred build)?
Thanks,
Click to expand...
Click to collapse
You can't expect nightly builds to be stable- they will and do have issues with various things.
The vast majority, if not every single AOSP ROM for the SGS3 uses all of (or a good chunk) of CyanogenMod's code, which is why you see so many of the same bugs between builds that are rarely fixed until someone submits to CyanogenMod's Gerrit.
I can't comment on your specific issue, just posting some food for thought.
A lot of people have posted about echoes or low volume on the CM10 builds. I don't make many phone calls so I don't know if this affects every phone running CM10. But I'm sure it does to various extents. They will work it out in the coming weeks as they work toward a stable build.
Sent from my SCH-I535 using Tapatalk 2
the echo seems to be gone in the 8/31 build
use this thread to ask questions about it
http://forum.xda-developers.com/showthread.php?t=1840414&page=140
Preferred Build
Is there a stable build other than the nightlies? If so where would I find it?
Stormer1981 said:
Is there a stable build other than the nightlies? If so where would I find it?
Click to expand...
Click to collapse
I'd check the development forum or the nightly thread.
Sent from my Galaxy S III
ripken204 said:
the echo seems to be gone in the 8/31 build
use this thread to ask questions about it
http://forum.xda-developers.com/showthread.php?t=1840414&page=140
Click to expand...
Click to collapse
Agreed
Sent from my SCH-I535 using Tapatalk 2
No echo here. I just flashed to the 9/1/2012 nightly from stock.
Did you try playing with the call settings? I have noise suppression enabled and voice privacy disabled.
I actually have a similar problem (can't post on official thread yet).
I have trouble with my headset volume.
If i plug it in DURING a call, I cant hear anything and can't do anything to adjust the volume.
If i plug it in BEFORE a call, it's fine.
Any clues as to whats going on or any suggestions on how to fix it?
Paranoid android Sept 2nd build seems to work nice, i think it works better than the CM10 builds even though its based off it. You can also mess around with tablet mode!
Let's get the echo fixed and the roaming issue fixed and the forum will flock to these roms. Till then I would beware.
Sent from my SCH-I535 using xda premium
I just flashed CM10 09/04 nightly and I am still getting the 3 second In call delay, I am still getting echo on speaker phone and I am still getting my voice navigation only say " in a half mile" Nothing else, No one seems to even mention this in the official CM10 forms. and No its not a half mile from my house to the end of my street , its like less than 1000 ft. Everything else seems to work good but the delay and the echo are very annoying so I am going back to the build that worked best for me cm10 08/22
Defragger51 said:
I just flashed CM10 09/04 nightly and I am still getting the 3 second In call delay, I am still getting echo on speaker phone and I am still getting my voice navigation only say " in a half mile" Nothing else, No one seems to even mention this in the official CM10 forms. and No its not a half mile from my house to the end of my street , its like less than 1000 ft. Everything else seems to work good but the delay and the echo are very annoying so I am going back to the build that worked best for me cm10 08/22
Click to expand...
Click to collapse
Same results here for 904. The other forum mentions that an unofficial build has the incoming call delay fixed, though, so I'm hoping the fix shows up when the official 905 ROM comes out.
Headphones with mic not working
I'm running the 9/2 build and when I plug the stock headphones with mic into the phone I cannot talk or hear phone calls through it. No issue with music. Screen flickers when using keyboard (Swiftkey). Volume control in call doesn't seem to work. There is also a 5 second delay when I answer a call to when I can hear the other person or they can hear me. Same delay with speaker phone.
At least the damn echo is gone though :good:
Can anyone confirm whether or not the dock audio is working on recent CM10 builds? I've tried searching the thread and have done everything short of just flashing it to see.
Thanks for your replies!
The dock audio was still not working for me on the CM10 from 9/5.
landtuna said:
The dock audio was still not working for me on the CM10 from 9/5.
Click to expand...
Click to collapse
You are correct. Just tried it myself. This is the main thing holding me back from CM10. I'm going to attempt to add it in myself. We'll see what happens.
9/5 build seems to be very solid. No data issues or call issues. Cannot comment o no the dock audio though. Make sure you aren't doing dirty flashes, there have been tons of issues with dirty flashing.
Sent from my SCH-I535 using xda app-developers app
This is why I switched to ParanoidAndroid. It is Jellybean and far more stable than the current CM10. If you want Jellybean right now~ I highly recommend PA. If you really like CM, still, try PA~ it will help you wait for the official CM10 release. I actually don't see a need to go CM10 tbh. PA is wonderful.
Krystalmyth said:
This is why I switched to ParanoidAndroid. It is Jellybean and far more stable than the current CM10. If you want Jellybean right now~ I highly recommend PA. If you really like CM, still, try PA~ it will help you wait for the official CM10 release. I actually don't see a need to go CM10 tbh. PA is wonderful.
Click to expand...
Click to collapse
I'm going to give PA a try... I am still having serious issues with CM10, hope they will be fixed with PA

[Q] CM10 and my bluetooth device still no go?

Hi all,
I am tying to figure why my particular bluetooth device just refuses to work with CM10. (BluAnt S4)
I have tried all different versions of CM10 here, as well as the vincom's audio bluetooth fix, to no avail.
Since I have to use it in my car, because of the laws around here, I would like to know anyone else has a working fix for this.
My same device works very well with my girlfriends nexus s CM10 setup.
I get it to ring when I call, but cannot talk/listen to the other party, and they cant hear me. It does show that it is connected, and paired.
I keep reverting back to my backup of CM9 for my daily driver.
Thanks
Heeter
Heeter said:
Hi all,
I am tying to figure why my particular bluetooth device just refuses to work with CM10. (BluAnt S4)
I have tried all different versions of CM10 here, as well as the vincom's audio bluetooth fix, to no avail.
Since I have to use it in my car, because of the laws around here, I would like to know anyone else has a working fix for this.
My same device works very well with my girlfriends nexus s CM10 setup.
I get it to ring when I call, but cannot talk/listen to the other party, and they cant hear me. It does show that it is connected, and paired.
I keep reverting back to my backup of CM9 for my daily driver.
Thanks
Heeter
Click to expand...
Click to collapse
Had the same issue, moved on to AOKP though that's not a resolve to CM10 but it's a fix for me since car BT is practically essential.
Thanks for that, which aokp based ROM do you use?
Heeter
Sent from my SAMSUNG-SGH-I727 using xda premium
Does any other BT device work?
Did you try the 9/18 cm10 unofficial nightly? The 9/18 nightly works flawlessly.
When you flash are you formatting system? I always format system on nightly as things seem to work better\
here is the link to the 9/18 build http://builds.redpepperracing.com/u...tory=rpr&PHPSESSID=4d6a6fgjqn8d05c0nt03qmjpg0
jb apps http://builds.redpepperracing.com/u...tory=rpr&PHPSESSID=4d6a6fgjqn8d05c0nt03qmjpg0
I had official CM9 stable and yes confirm BT does work.
As for my current AOKP I was using the one post by R4INS, I found out last night there was an update see http://goo.im/devs/R4INS (the latest Sep-14-2), I haven't tried the BT on that update yet though I can confirm Sep 9 version worked link http://forum.xda-developers.com/showthread.php?t=1831858. On Sep 9 you will still need to flash policy conf. fix posted by vincom to fix the music output in car, but the BT phone talk always worked without any issues.
***edit*** officially confirmed sep 14 update BT didn't work, in reverting to sep 9
I do not have access to any other BT device at this time. I did a completely fresh install of cm10 nightly 9/18 and later. BT never worked. I have just installed AOKP (ortheus) and my BT is now working.
Heeter
Sent from my SGH-I727 using xda premium
Heeter said:
Hi all,
I am tying to figure why my particular bluetooth device just refuses to work with CM10. (BluAnt S4)
I have tried all different versions of CM10 here, as well as the vincom's audio bluetooth fix, to no avail.
Since I have to use it in my car, because of the laws around here, I would like to know anyone else has a working fix for this.
My same device works very well with my girlfriends nexus s CM10 setup.
I get it to ring when I call, but cannot talk/listen to the other party, and they cant hear me. It does show that it is connected, and paired.
I keep reverting back to my backup of CM9 for my daily driver.
Thanks
Heeter
Click to expand...
Click to collapse
CM has been having this problem since CM7. And it has been reported over and over in their issue tracker. But nobody at the CM team can take it and just fix it.
Vincom uploaded a fix for his Support lite Rom. Here ya go & for all others that need it.
http://d-h.st/pC1
Be sure to thank him!
Sent from my ASUS Transformer Pad TF300T running 4.1 [email protected]_V01
I got my first BT working with AOKP, so I am going to stick with this one for now,
Heeter
Sent from my SGH-I727 using xda premium
Not sure if I have just been picking the right ones but I've never had a Bluetooth/Wifi issue with any ROM I've used...
Right now I'm running Superlite JB without gapps which I would think would have the least support and most issues but it's running really well.
Works flawlessly with my car's BT.

[Q] Which 4.2.2 Rom has Bluetooth working?

All,
Been on Synergy for the past 3 month and my flashing itch is coming back. I want to start trying 4.2.2...getting tired of TW. Has the 4.2.2 Roms gotten stable as a daily driver? I will predominantly using this for work so stability is key and driving, hence the bluetooth functionality.
I was roaming around the thread cyanogen, carbon and liquid and seem like they all have bluetooth issues?
Anybody on a current ROM that have both stability and working bluetooth?
Thanks for any opinion.
cant comment on bluetooth, but they are certainly stable and daily driver worthy.
hopefully someone else can chime in on the bluetooth specifically
Nutzzer said:
All,
Been on Synergy for the past 3 month and my flashing itch is coming back. I want to start trying 4.2.2...getting tired of TW. Has the 4.2.2 Roms gotten stable as a daily driver? I will predominantly using this for work so stability is key and driving, hence the bluetooth functionality.
I was roaming around the thread cyanogen, carbon and liquid and seem like they all have bluetooth issues?
Anybody on a current ROM that have both stability and working bluetooth?
Thanks for any opinion.
Click to expand...
Click to collapse
I use cyberon voice commander for BT voice dialing. I have found on all ASOP roms, it works but the volume is low and there is a delay of up to 5 second in acknowledging the voice command.
Bluetooth works fine for me on a Carbon nightly....really like this ROM.
Sent from my SCH-I535 using Tapatalk 2
LiquisSmooth 2.5 is very stable. Been using it as a DD since January. Bluetooth works fine when I use it, which isn't much.
I have CM 10.1 RC5, and it's the most stable release they have. I believe they fixed the bluetooth a while ago. I only use it for audio streaming to my car, so I can't really comment on headsets or whatever else you might use it for.
But to my knowledge, bluetooth works. :good:

[Q] Wired mic not working on AOSP ROMS

On my AT&T HOX (evita S-OFF, upgraded to 3.18 firmware), I cannot find an AOSP rom where the mic on my HTC or any other 3rd party wired headphones will work. It only will use the mic that is built into the phone itself. If I use any Sense-based rom, the wired headset mic works just fine. Would love to stay on AOSP for battery life and performance, but this is a showstopper when trying to talk hands free on business calls. Anyone have any hints as to what I can do to get the wired mic recognized? Or just why it won't work?
Thanks!
drubin333 said:
On my AT&T HOX (evita S-OFF, upgraded to 3.18 firmware), I cannot find an AOSP rom where the mic on my HTC or any other 3rd party wired headphones will work. It only will use the mic that is built into the phone itself. If I use any Sense-based rom, the wired headset mic works just fine. Would love to stay on AOSP for battery life and performance, but this is a showstopper when trying to talk hands free on business calls. Anyone have any hints as to what I can do to get the wired mic recognized? Or just why it won't work?
Thanks!
Click to expand...
Click to collapse
I see lots of reads, but nobody else is experiencing the same issue?
Have you only tried aosp ROMs with the 3.4 kernel? Or have you tried older aosp ROMs with the 3.0 kernel?
Sent from my Evita
timmaaa said:
Have you only tried aosp ROMs with the 3.4 kernel? Or have you tried older aosp ROMs with the 3.0 kernel?
Sent from my Evita
Click to expand...
Click to collapse
I'll load up an AOSP with a 3.0 kernel to try it. Is the wired mic working with your device? Which ROM? I am currently on ViperXL, which uses the 3.4 kernel, but it is Sense.
I'm currently on MagioRom, but I've used every aosp ROM available (apart from Xylon). I haven't used a wired headset in a while because mine broke, and I'm not sure how long ago that was, so I'm not sure whether I can confirm it worked for me on the 3.4 kernel. I know it's definitely worked for me on the 3.0 kernel.
Sent from my Evita
timmaaa said:
I'm currently on MagioRom, but I've used every aosp ROM available (apart from Xylon). I haven't used a wired headset in a while because mine broke, and I'm not sure how long ago that was, so I'm not sure whether I can confirm it worked for me on the 3.4 kernel. I know it's definitely worked for me on the 3.0 kernel.
Sent from my Evita
Click to expand...
Click to collapse
I installed the CM 10.0 stable from last December that uses the 3.0 Kernel, and the wired microphone works. Great suggestion! I'll go back to the devs and see if they can understand what happened in 3.4 to kill that. Thanks!
The issue is already posted in the CM10.1 issue tracker, so the devs are already aware of this issue. I believe this is a recurring issue with AOSP ROMs using the 3.4 kernel, because I was using CM10.1 prior to that takedown that stopped nightlies for us and was not experiencing this issue.
Others will say that it works fine over bluetooth. That's the answer that I have been given a couple times, but not the answer that I was looking for myself.

Categories

Resources