Hi,
The light of my buttons at the bottom aren't working sometimes! Someone knows why??
The vibrations of the buttons on the bottom of my sensation also stoped!
The lights are only working of I unlock my phone with Sweep To Wake! So it isn't a bad connector...
They do work in recovery!
PLEASE HELP!!!
Thanks
its maybe becaus of powersaving from new viper rom or some battrey manager app !
ali_l67 said:
its maybe becaus of powersaving from new viper rom or some battrey manager app !
Click to expand...
Click to collapse
Yes I turned it on but then they didn't vibrate then truned it of and they vibrate again... but now after turned it in and of again they don't work anymore! Already reflashed ROM without full wipe and changed kernel back to default!
TTime_007 said:
Yes I turned it on but then they didn't vibrate then truned it of and they vibrate again... but now after turned it in and of again they don't work anymore! Already reflashed ROM without full wipe and changed kernel back to default!
Click to expand...
Click to collapse
for me its workfine without problem maybe its time to do a fullwipe !
ali_l67 said:
for me its workfine without problem maybe its time to do a fullwipe !
Click to expand...
Click to collapse
Already was planning that! Making a Titanium backup now!!
Thanks for your help!!
PS: Do you also know why my phone sometimes just shuts down?
Did a clean install! Vibrations are back... but my backlight isn't.. any idea??
Related
hello.. i have looked for the answer to my question but i cant seem to find it, therefore i created this post.. sorry if i posted in the wrong section or if it is already out there.. i hope mr clown doesnt close my thread.
i rooted my phone doing it with the one click tool, and it worked perfectly fine.. the problem started when i tried to install a custom rom on it.. i installed rom manager and cwm fine.. but the problem is that i was following this instructions..
http://forum.xda-developers.com/showthread.php?p=11557769
which i read i had to get this rom...
http://forum.xda-developers.com/showthread.php?t=868720
the problem is that i didnt realize that i needed eng s off and i had s off wich therefore i wasnt able to see the cwm screen..
following the steps that told me to wipe the data with the wipedat.zip.. i did it through rom manager.. when the phone rebooted it went to a dark screen slowly so i took the battery out, and now is frozen in the htc logo... i have tried the up/down/power combo but the phone vibrates 3-4 times and then it goes to a black screen with the light on... but i dont get anything else.. so im really stock at either htc screen or black screen... i need help!!! i hope some one nows a good way for me to fix this.
Try pulling battery...wait a minute...then replace battery. Hold volume down as you power it on. Should get you in hboot.
Nickovtyme said:
Try pulling battery...wait a minute...then replace battery. Hold volume down as you power it on. Should get you in hboot.
Click to expand...
Click to collapse
ur a genious!!!!!!!
thank u so much!!!!!!!
Nickovtyme said:
Try pulling battery...wait a minute...then replace battery. Hold volume down as you power it on. Should get you in hboot.
Click to expand...
Click to collapse
puneta26 said:
ur a genious!!!!!!!
thank u so much!!!!!!!
Click to expand...
Click to collapse
Heh...I wish...I've just had a couple Roms hang in bootloop...or stick on boot...or what have you. I had t learn...
Read this link...it'll help ya:
http://forum.xda-developers.com/showpost.php?p=12611520&postcount=6
Hi. I have unlocked, my phone sucsessfuly, S-off, h-boot, custom recovery. After restart my touch screen is unresposible for about 10 seconds. After that is O.K. but sometimes is the same thing. I can not unlock , because the ring is not moving. I changed my screen protector, Tryed without screen protector.Nothing helped. Should I flash stock Rom. Very weierd issue. BTW in CWM , when I try to flash custom rom is same thing, screen does not respond for about 3,4 seconds after that is O.K.
solutions...
invisiblebm said:
Hi. I have unlocked, my phone sucsessfuly, S-off, h-boot, custom recovery. After restart my touch screen is unresposible for about 10 seconds. After that is O.K. but sometimes is the same thing. I can not unlock , because the ring is not moving. I changed my screen protector, Tryed without screen protector.Nothing helped. Should I flash stock Rom. Very weierd issue. BTW in CWM , when I try to flash custom rom is same thing, screen does not respond for about 3,4 seconds after that is O.K.
Click to expand...
Click to collapse
Hi, first of all my friend, USE the search first.
Second, you can try the TouchScreen Booster 1.X from Market that help me resolve my touch issues.
third, if problem still exist, you can try to reflash again wipeing everithing.,cache,user,etc.
and last, don't forget to say thanks
matury said:
Hi, first of all my friend, USE the search first.
Second, you can try the TouchScreen Booster 1.X from Market that help me resolve my touch issues.
third, if problem still exist, you can try to reflash again wipeing everithing.,cache,user,etc.
and last, don't forget to say thanks
Click to expand...
Click to collapse
Off course I have searched. We have 3 months old baby and I dont have too much time to look around. Thanks added!
Hi When I connect the phone, which is turned off, to the electric current to recharge it, it automatically switches to recovery.
Why?
jrambo92 said:
Hi When I connect the phone, which is turned off, to the electric current to recharge it, it automatically switches to recovery.
Why?
Click to expand...
Click to collapse
Ya it will...for some roms..
Blaze Forth said:
Ya it will...for some roms..
Click to expand...
Click to collapse
ah ok! Can I remove this option?
LOL!!
jrambo92 said:
ah ok! Can I remove this option?
Click to expand...
Click to collapse
I had this problem in my HTC Sensation XL , which i think is not really a problem. Try the the Deroid Xperia Z rom . Stable fast and doesnt have this preoblem :laugh::good:
jrambo92 said:
ah ok! Can I remove this option?
Click to expand...
Click to collapse
By adding charging animation in your rom... This will help from not going to recovery.. Instead it sill show chrgng animation... You can add it by pushing chrging animation folder in your roms system memory...
After flashing philz touch recovery, this happens with my device too..with cwm it works normal.
jrambo92 said:
Hi When I connect the phone, which is turned off, to the electric current to recharge it, it automatically switches to recovery.
Why?
Click to expand...
Click to collapse
it happens coz even after the battery is charged out some charge is left in the phone.. when your phone is off again on the phone let it get completely discharged till screen goes off.. connect charger the recovery wont come..
I just had a bootloop changing dalvik to art. Then it shutdown suddenly and there is no way to turn it on, i can't access to recovery or download mode, and it isn't recognized by the computer. Sorry for my english... Any advice?
I had the Nexus g beta 4 rom, with a clean installation, and it works fine with dalvik
Sure that the Battery is not completely drained?
Try this:
seapoint said:
According to Motorola Mobility, the solution to a fully discharged battery not restarting is to plug it in to charger and press & hold the power button for 18+ seconds, when the battery should resume charging.
Click to expand...
Click to collapse
mokkami said:
Sure that the Battery is not completely drained?
Try this:
Click to expand...
Click to collapse
I'll try when I get home and I'll post the results but I did the same several times, more than 10 seconds but no more than 18...
Sent from my Nexus 5 using Tapatalk
man look here, maybe can help
http://www.modaco.com/topic/367037-fix-recover-from-dead-battery-fix/
kaine666 said:
I just had a bootloop changing dalvik to art. Then it shutdown suddenly and there is no way to turn it on, i can't access to recovery or download mode, and it isn't recognized by the computer. Sorry for my english... Any advice?
I had the Nexus g beta 4 rom, with a clean installation, and it works fine with dalvik
Click to expand...
Click to collapse
Did you do anythigh else than switching to ART? I am asking, because you cannot brick your phone with ART. When you turn the phone on, it first runs the bootloader, the bootloader loads the kernel and only after that is the ROM loaded, which is the step where ART can cause problems.
In short - there is no way ART could have done anything to the bootloader or the kernel and thus it couldn´t have bricked the phone.
knizmi said:
Did you do anythigh else than switching to ART? I am asking, because you cannot brick your phone with ART. When you turn the phone on, it first runs the bootloader, the bootloader loads the kernel and only after that is the ROM loaded, which is the step where ART can cause problems.
In short - there is no way ART could have done anything to the bootloader or the kernel and thus it couldn´t have bricked the phone.
Click to expand...
Click to collapse
The phone get stuck into bootlop a lot of time when I changed to art. After that It shutdown, ¿0% battery? I don´t know but now I cannot turn it on anyway...
The battery can be the problem but, freeze It...? Would it affect to the moisture indicator?
Try pressing 45 secons button power until to device power on, after entry to CWM and restore backup or Stock ROM.
kykemejia said:
Try pressing 45 secons button power until to device power on, after entry to CWM and restore backup or Stock ROM.
Click to expand...
Click to collapse
No response
Sent from my Nexus 5 using Tapatalk
kaine666 said:
No response
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
thank you anyway
225 rpostdig
Loki[ITA] said:
man look here, maybe can help
http://www.modaco.com/topic/367037-fix-recover-from-dead-battery-fix/
Click to expand...
Click to collapse
Freeze the phone worked!!! Thank you sir, you save my phone!
Hi,
My phone Samsung Galaxy S II Plus (GT-I9105P) reboots itself. I am running stock 4.2.2 not rooted. How to fix this ? Phone is about week old. There are no apps installed. How can i fix this ? HELP ME !!!
Boot into recovery And wipe Data , Dalvik Cache !
Press Thanks if Helped !!
Make sure power saving mode is turned off!
Sent from my GT-I9105P using xda app-developers app
-Sabry said:
Boot into recovery And wipe Data , Dalvik Cache !
Press Thanks if Helped !!
Click to expand...
Click to collapse
I did data wipe, but when I try to wipe cache it gives me an error and reboots.
safariking said:
Make sure power saving mode is turned off!
Sent from my GT-I9105P using xda app-developers app
Click to expand...
Click to collapse
I always keep power saving mode off.
[SLOVED] My phone reboots itself !
Hi, i just find out that my SIM card was making phone reboot...
i have a the same problem with my SGS2+, how you figure out that its SIM fault? And what SIM should be to don't make reboots?
barwn said:
i have a the same problem with my SGS2+, how you figure out that its SIM fault? And what SIM should be to don't make reboots?
Click to expand...
Click to collapse
So, actually your SIM is okey . Problem is your OS. I took my phone to repair and they just installed a new update that "Samsung" released... It's still 4.2.2.
Hey everyone.. I have a problem with the Samsung Galaxy S II Plus.. It just turned off while I was sleeping (battery full charged) and in the morning I couldn't turn it on again.. And it's not working since then..
Does anyone knows the possible solution..? The phone is not rooted..
It's called Sleep of Death - google for it, "seems" a well know issue especially for the s2+.
For some it happens 2-3-4 times/day (poor souls!) other once every two weeks (doable). It has to be an hardware malfunction, maybe a batch of Chipset (from Broadcom) do not toletare frequency/voltage down throttling (on standard firmware) and hangs >:
No clear indication where does it come from (app, driver, official recognition from Samsung), quick advice: some users report no SoD after they flash Omnirom - others just flash a new kernel, other remove the SD card or install some app to prevent Deep Sleep or awake it every X minutes.
If you can German peek here: http://www.android-hilfe.de/samsung...creen-death-nach-4-1-2-jelly-bean-update.html
I should get my hands on a s2+ with Sod.
Another "cold" suggestion, root it, flash a kernel or a new ROM and install "SetCPU": then try different CPU Governors, I higly suspect that something different from the original "Ondemand" could improve the situation (given the implementation is not faulty per se). - or, if the kernel allow that, try to apply NOT undervolting but a slight overvolting for the 200Mhz state.. but so far it's a (gratuitous, generic) wild guess (45 days I can start experimenting :good.
Hold tight and See ya! :fingers-crossed: