Related
Hi guys, I really hope someone can help me.
I accidentally deleted the boot partition on my vodafone smart 2.
I was trying to install the original recovery that came with the phone before the OTA update2 using a tool from roeddie BUT, I forgot to put all the images in the same folder as the tool and the tool ended up deleting the boot partition without having a boot image to flash, and now I have a phone that is stuck in the white screen with the green android in the middle =(
btw, if I "reboot" if and quickly plug the usb cable in I get and unkown device in the device manager with this ID VID_0A5C&PID_2132&REV_0204
:crying::crying::crying:
With the program that you flashed it with can't you just download all the required sectors (boot, recovery, Rom) and just reflash?
Sent from my SGH-T999
No, the computer does not recognize the phone anymore =(
To my knowledge every Android phone has like a "apx or apb mode" or something of that nature(don't quote me on that lol) didn't you have to go on some sort of mode to use the application?
Sent from my SGH-T999
Yes, I had to power the phone holding volume down + power, but that won't work anymore =/
Ok now i had this happen to me with the Asus transformer tf 101 i flashed only the Rom and the tablet wouldn't even return on but it did go to apx mode, where the screen would show nothing, basically off, but with the right drivers my computer was able to recognize it and I flashed the boot.img, recovery.img, and Rom hopefully you should be able to do the same thing.
Sent from my SGH-T999
But the computer does not recognize the phone when I plug it, usually it shows something in the device manager, but now it shows nothing at all, except for when I quickly plug the usb cable right after it powers up, but apparently that hardware id is from some broadcom wireless something.
I don't know i never has experience with that phone , did you try to boot into recovery?
Sent from my SGH-T999
It was the first thing I tried, but I guess before it goes into recovery it needs the boot partition, which is gone.
I found this thread
http://forum.xda-developers.com/showthread.php?t=1144773
ALCATEL OT-980 /OT-981 recovery
On how to recover a bricked phone with "fast boot" hope that helps you good luck mate
Sent from my SGH-T999
Already tried this, does not work with this phone =(
But thanks for the effort.
I guess I'll have to go to the vodafone store in which I bought the phone and try to send it to repair.
Sorry man good luck
Sent from my SGH-T999
Just got home with my phone =)
Took the phone to a vodafone store at lunch, around 4pm got a text saying I could go and get my phone, I guess they have some mojo, voodoo or black magic to bring the dead back to life.
I think you probably messed up a step with the tutorial but at least you got the phone fixed how much did it cost you?
Sent from my SGH-T999
Nothing, it's still under warranty
Nice man congrats and if you try again make sure you have a recovery img available lol
Sent from my SGH-T999
having The same problem!
i'm also having the same problem with my xperia c3
it is bricked due to custom recoery and my boot partition has somehow deleted now i'm unable to boot up my phone any possible waysssssssss?:good:
Hello!
Okay, so the weirdest thing has happened with me. My Nexus S (i9023) was working absolutely fine till last evening when it ran out of battery. After I came back home, I put it for charging and switched it on.
For the first few time, nothing would show except the USB connected/ disconnected screen which appears everytime you plug your phone in. I thought maybe it was just being weird, so I took out the battery and booted it up again. This time I am just stuck at the Google Logo! It is not going ahead.
I can enter CWM Recovery. However, I cannot mount sd card or usb storage or anything for that matter. If I try and install through .zip it says 'e can't mount sd card'. I can't format my sd card either, same problem of can't mount. I thought if I tried pushing a ROM in by ADB that might work.. It did transfer the file it showed that in the cmd window. However, CWM refuses to mount my sd card or my usb storage.
So basically, in essence, I'm locked out of my Nexus! Please please help. I'm really lost and confused now.
Thanks so much.
Alex
Similar problems below in this thread with solutions.
Let your phone sit for an hour with the battery out, Download Wug's Nexus Toolkit from the development section, download drivers from there and install stock boot img then re-root.
I have never seen it before but seems like this prob is coming up a lot lately. It can be fixed. Good luck.
Sent from my Galaxy Nexus using Tapatalk 2
Nexism said:
Similar problems below in this thread with solutions.
Let your phone sit for an hour with the battery out, Download Wug's Nexus Toolkit from the development section, download drivers from there and install stock boot img then re-root.
I have never seen it before but seems like this prob is coming up a lot lately. It can be fixed. Good luck.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Thanks for your reply. I'm starting now. I have a doubt, how do I install stock? Since I can't seem to be able to mount anything..
"It can be fixed" - few words have given me this much hope in my life! Thanks a lot!
EDIT: I guess you mean flash through ADB right? Okay, let me try that. I really hope you are right. Some of those other problems lead to paying up! Ouch.
Hey! I just tried using WUGS.. for some reason it does not make the final boot and instead says: 'Fastboot Status - FAILWrite Fail' -- oh god.. I'm trying it again now..
Is there any other way out? :/
Okay, so now my recovery is also gone after using WUGS.. oh man. And the phone isn't starting up. Please please please help? I'm getting really desperate now.
EDIT: And it sucks that I can't post in the WUGS thread (http://forum.xda-developers.com/showthread.php?t=1766475) because I have less than 10 posts! fml.
can you boot into fastboot? If so then itnwasnthe same prob I had when I wiped my phone and SD in recovery. If you can boot into fastbootnthen makensurenyou leave the batt out format least an hour. If you installed Wug's drivers the bottom left corner ofnfastboot should give a message.
Sent from my Galaxy Nexus using Tapatalk 2
Nexism said:
can you boot into fastboot? If so then itnwasnthe same prob I had when I wiped my phone and SD in recovery. If you can boot into fastbootnthen makensurenyou leave the batt out format least an hour. If you installed Wug's drivers the bottom left corner ofnfastboot should give a message.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Yes, I can get into fastboot - i'm leaving the battery out now - do you think i should try
fastboot erase boot
fastboot erase cache
fastboot erase recovery
fastboot erase system
fastboot erase userdata
and then flash everything again?
There is always a way to recover the nexus right? Even if it is hardbricked, right?
I really really appreciate your help.
I too have this problem but after a lot of battery pulls it does eventually start up. It just started happening all of a sudden. Ive heard that heating it up with a hair dryer or heatgun can help and also re-locking and un-locking the boot loader can help as it wipes the card. Could be worth a try.
Any luck Someone? I know it sux big time to feel like your phone is bricked. I am not a dev or expert but it sounds like the prob I had last week, when I posted no one replied so I ordered a GNex thinking all was lost. Before I activated my new phone I felt like I had to fix my nexus before getting started on my new phone and that's my situation. I don't want you to feel like the community has forgot you and thats why I'm trying to help. Were you able to get Wug's Toolkit to recognize your phone after leaving the batt out? I don't know why but I think that's the key. I had to leave mine overnight 'cause I don't have a PC and the next day at my friends house when I plugged the USB in I got that message at the bottom of fast boot "system normal" or something to that effect. Once recognized the stock boot IMG is what you need.
ANY ONE ELSE WHO HAS HAD THIS OR A SIMILAR ISSUE PLEASE GIVE SOME ADVICE. LET'S NOT LEAVE A COMMUNITY MEMBER WITH A LIFELESS PIECE IF PLASTIC. THANKS FORUM.
To set your mind at ease yes, I believe as long ad you have access to fastboot your nexus can be saved.
Sent from my Galaxy Nexus using Tapatalk 2
sounds to me like a hardware issue, since you haven't changed software and it seems like a brick. try flashing stock rom via fastboot, you should be able to google around how you can do that.
Blo0dyyy said:
sounds to me like a hardware issue, since you haven't changed software and it seems like a brick. try flashing stock rom via fastboot, you should be able to google around how you can do that.
Click to expand...
Click to collapse
Hi, if I'm not wrong essentially what WUG does automatically is what you do by fastboot (erase bootloader, cache, system.. and then flash all of them back) in both system fails to wipe and refuses to be flashed again (flashwrite error).
I don't want to lock it and then unlock it again because I read in other threads that it might lead to a permanent lock with an error for subsequent unlocking - that would leave me completely out.
Anyway, let's see - I've given it to someone to check it up. I'll keep you guys posted. He said he wanted to repartition the sd card.
My intuition says: hardware problem!
So I tried Odin today - and that also did not work it refused to flash the ROM. In the process I somehow managed to mess up the bootloader such that the phone would have some two lights on randomly when I switch on. It doesn't go into download mode either. I next plan to use JTAG to get the bootloader back and then reflash everything. Hopefully, that should sort things out. The Resurrection tool is amazing! I'll keep you guys posted.
Get it going someone?
Sent from my Galaxy Nexus using Tapatalk 2
I have the same problem as you, with the added difficulty of my phone not being recognized by anything other than fastboot. No ADB commands will function. It was charging, rebooted itself into a bootloop, and I have been struggling with it ever since. It is currently a worthless piece of plastic, my favorite phone ever, gone.
I can wipe and re-write recovery all that I want, but it seems as if the sdcard partition that /system and some other stuff writes too is either corrupted or physically damaged. Every time I flash it all via fastboot it all goes as stated, but gives me a fail message on the last two partitions and never allows me to actually write a new ROM or boot image. I wanted to try ODIN but can't seem to get it to recognize my phone in download mode...
Let me know if you have any success or progress!
someone. said:
So I tried Odin today - and that also did not work it refused to flash the ROM. In the process I somehow managed to mess up the bootloader such that the phone would have some two lights on randomly when I switch on. It doesn't go into download mode either. I next plan to use JTAG to get the bootloader back and then reflash everything. Hopefully, that should sort things out. The Resurrection tool is amazing! I'll keep you guys posted.
Click to expand...
Click to collapse
I myself am experiencing the same problem.... Did your cell got fixed.....?? Did JTAG worked kindly keep us posted em really concerned about it... coz your solution might get me some where or else i hav completely lost my phone ;(
Get it going someone?
Click to expand...
Click to collapse
Hey Nexism! Sorry for the late reply - things've been busy.
The JTAG is giving an internal voltage for some reason - so I've sent it for repair. It'll be repaired by tomorrow or so.. I'm then going to set it back up. It's all already soldered and all, just waiting for the JTAG. I think I've understood how this thing works now. So yeah, I'm hoping it's all sorted. Thanks a lot for your concern man.
I have the same problem as you, with the added difficulty of my phone not being recognized by anything other than fastboot.
Click to expand...
Click to collapse
Well my phone went blank - no fastboot mode - no download mode - no nothing - when i'd put the battery in randomly two of the four front lights would come on.. JTAG is going to solve the problem hopefully.
someone. said:
Hey Nexism! Sorry for the late reply - things've been busy.
The JTAG is giving an internal voltage for some reason - so I've sent it for repair. It'll be repaired by tomorrow or so.. I'm then going to set it back up. It's all already soldered and all, just waiting for the JTAG. I think I've understood how this thing works now. So yeah, I'm hoping it's all sorted. Thanks a lot for your concern man.
Well my phone went blank - no fastboot mode - no download mode - no nothing - when i'd put the battery in randomly two of the four front lights would come on.. JTAG is going to solve the problem hopefully.
Click to expand...
Click to collapse
So ladies and gentleman, JTAG also failed - apparently something was wrong with the sd card only. I got my motherboard replaced - luckily the guy I went to knew someone and Samsung and charged me Rs. 4,000 as opposed to the Rs. 8500 quoted by the Samsung Service Centre. Oh well.
Back on my Nexus now. XD
someone. said:
So ladies and gentleman, JTAG also failed - apparently something was wrong with the sd card only. I got my motherboard replaced - luckily the guy I went to knew someone and Samsung and charged me Rs. 4,000 as opposed to the Rs. 8500 quoted by the Samsung Service Centre. Oh well.
Back on my Nexus now. XD
Click to expand...
Click to collapse
I am with the same problem here... I cant turn off my phone or it get stuck in pre-boot phase. Acess recovery and cant mout sd card. Using last stable cm 10.
I think my sdcar is dead.
Same problem here. Around 8 out of 10 times I get stuck on the Google logo, 8 out of 10 times in recovery I can't mount SD card as well. And if I successfully boot, Media wakelocks and my battery drains in sleep as fast as if the screen were on. Please help.
For me I first noticed that my apps weren't using the SD partition. Tried to mount normally (fully loaded ROM) (ROM is SlimBean Beta2), but it would not mount. Went into CWM and tried to mount in there, but it would not work. tried to "Format /sdcard" but "Error mounting /sdcard". My phone still boots and runs fine, but I just don't have access to the SD partition. I don't want to do anything because I need my phone for business. Is there any PROVEN way to fix this yet?
I realize there are multiple threads like this but throughout all of them I have not found any that relate to my issue or a combination of them. If I have missed one I apologize in advance and please direct me to that thread then. I was running steel droid what I thought was 5.5 ICS but it looks like it is 5.1 according to the forums. I was previously running steel droid 4.5 GB. I was switching back to 4.5 because I could not get wifi hotspotting to work. I forgot to wipe my cache and went to install 4.5 and I am stuck in bootloop. X+Power gives me the android error screen, M+Power allows me into the main menu but I cannot use AP fastboot, SBF motorola will not pick up my phone and the screen will show a connection to the USB cable. I've never had a problem before but also have never forgotten to wipe the cache so any thoughts would help.
m3schz8! said:
I realize there are multiple threads like this but throughout all of them I have not found any that relate to my issue or a combination of them. If I have missed one I apologize in advance and please direct me to that thread then. I was running steel droid what I thought was 5.5 ICS but it looks like it is 5.1 according to the forums. I was previously running steel droid 4.5 GB. I was switching back to 4.5 because I could not get wifi hotspotting to work. I forgot to wipe my cache and went to install 4.5 and I am stuck in bootloop. X+Power gives me the android error screen, M+Power allows me into the main menu but I cannot use AP fastboot, SBF motorola will not pick up my phone and the screen will show a connection to the USB cable. I've never had a problem before but also have never forgotten to wipe the cache so any thoughts would help.
Click to expand...
Click to collapse
Not wiping cache won't give you boot loop lol just go back into recovery wipe everything and flash a working ROM solved :thumbup:
Sent from my SCH-I500 using Tapatalk 2
bbrad said:
Not wiping cache won't give you boot loop lol just go back into recovery wipe everything and flash a working ROM solved :thumbup:
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
I would but I get android error screen with exclamation mark each time regardless of how I access recovery X+Power or vol +,- and Power then going to recovery, I wouldn't have thought that not wiping the cache would have been the cause but it was the one step I didn't do that I normally always do so I was just adding it in for information but thanks for the know how that it wasn't the cause. Any other thoughts since I cant even get into my backup ROM or recovery, I have another SD card not sure if my SD card has become fried for some reason, I will be trying that to see if maybe that is all it is.
m3schz8! said:
I would but I get android error screen with exclamation mark each time regardless of how I access recovery X+Power or vol +,- and Power then going to recovery, I wouldn't have thought that not wiping the cache would have been the cause but it was the one step I didn't do that I normally always do so I was just adding it in for information but thanks for the know how that it wasn't the cause. Any other thoughts since I cant even get into my backup ROM or recovery, I have another SD card not sure if my SD card has become fried for some reason, I will be trying that to see if maybe that is all it is.
Click to expand...
Click to collapse
Well I'm on a Samsung device but we have a program you load files in and you can flash your device back to stock do you have something like that?
Sent from my SCH-I500 using Tapatalk 2
Droid 3 stuck in bootloop'
bbrad said:
Well I'm on a Samsung device but we have a program you load files in and you can flash your device back to stock do you have something like that?
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
Yep but phone isn't picking up my data cable and how ever many issues that have come about here, I think I am SOL but gonna try an SD card hoping that it is just a bad SD card or something like that. May end up having to use part of that great tax return also, thanks for the help, I'm going samsung next, that whole fore sight wasn't there two years ago.
In it's current state, is it in any way possible to tell that it is rooted? Is the boy animation stock or a different one? Motorola might repair it for you if you can't tell that it's been rooted
Sent from my HTC6435LVW using xda app-developers app
Droid 3 stuck in bootloop
dj2muchxx said:
In it's current state, is it in any way possible to tell that it is rooted? Is the boy animation stock or a different one? Motorola might repair it for you if you can't tell that it's been rooted
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Unfortunately you can easily tell that it is not stock ROM by bootloop
Well your computer should recognize your droid that's a common problem with Odin and Samsung one of these steps always work so try then and seen if we can't get your droid recognized NUMBER 4 WILL WORK 99% OF THE TIME BUT TRY THE OTHER METHODS FIRST 1. Use the stock cable or try a difrent port 2. If its possible on your program take out the battery and SD card as leaving them in course problems 3. Run the program as aminstrative 4. Plug the phone in and have it in download mode or whatever you call it WHILE THE COMPUTER IS BOOTING Up This will force the computer to recognize it not the best method but it always works
Sent from my SCH-I500 using Tapatalk 2
Droid 3 stuck in bootloop
bbrad said:
Well your computer should recognize your droid that's a common problem with Odin and Samsung one of these steps always work so try then and seen if we can't get your droid recognized NUMBER 4 WILL WORK 99% OF THE TIME BUT TRY THE OTHER METHODS FIRST 1. Use the stock cable or try a difrent port 2. If its possible on your program take out the battery and SD card as leaving them in course problems 3. Run the program as aminstrative 4. Plug the phone in and have it in download mode or whatever you call it WHILE THE COMPUTER IS BOOTING Up This will force the computer to recognize it not the best method but it always works
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
Thanks step 4 ended up being the working method, happened again when loading gingerbread back on, so I walked through it again, removed ICS from memory card wiped phone completely and then loaded gingerbread back on and finally had success. Thanks for all the help
m3schz8! said:
Thanks step 4 ended up being the working method, happened again when loading gingerbread back on, so I walked through it again, removed ICS from memory card wiped phone completely and then loaded gingerbread back on and finally had success. Thanks for all the help
Click to expand...
Click to collapse
NP if you ever need anything just ask
Sent from my SCH-I500 using Tapatalk 2
Hello,
I had a rooted verizon galaxy s3 (CM10) and I recently got stuck in a boot loop. So I connected to Odin and flashed both MD5 files and the root66.tar file, booted into recovery and tried to do a factory reset.
The problem is my power button won't work in recovery mode, so I can not select anything in the menu. The volume buttons work I just cant select anything.
I've searched all over for 2 days now and I can't find anything about my problem, am I screwed or is there something I haven't thought of yet?
Thanks preemptively for the help.
bump please help
Maybe possible to send commands to phone via adb?
Sent from my SCH-I535 using xda app-developers app
Which recovery you are using? Try twrp which recognises touch so no need of power button to select any option. I think class cwm also has touch based recovery.
Thanks doesn't hurt....
Thanks for the replies, I tried to run adb but just runs a lot of code then closes out. I tried to re-download and the same thing happened.
I was using the stock.vzw.root66.tar and BOOTLOADER_I535VRALF2.... I flashed them many times and nothing has changed it still just gets stuck on the 4G LTE screen. Where would I go about finding the recovery files you mentioned? I'm willing to try anything at this point.
Thanks again for the replies.
TotallyAGG said:
Thanks for the replies, I tried to run adb but just runs a lot of code then closes out. I tried to re-download and the same thing happened.
I was using the stock.vzw.root66.tar and BOOTLOADER_I535VRALF2.... I flashed them many times and nothing has changed it still just gets stuck on the 4G LTE screen. Where would I go about finding the recovery files you mentioned? I'm willing to try anything at this point.
Thanks again for the replies.
Click to expand...
Click to collapse
If it's stuck at the LTE logo, boot into recovery and factory reset.
Edit: to Odin flash CWM or TWRP, you can find both files in Open1your1eyes0's root thread in the dev section. Use either once you're rooted.
Sent from my SCH-I535 using xda app-developers app
If you just want this to be fixed quickly, you could always flash a Full-wipe rom that contains the bootloader, etc. Then after your back in the stock rom you could always re-unlock the bootloader, install custom recovery , re-root and flash whatever rom you wanted.
Surge1223
Thanks for the replies, I've searched the internet for a full-wipe rom and I cannot seem to find one, can you point me in the right direction?
Also sorry for the delayed response, I actually graduated college yesterday.
EDIT: Now I can't get the phone to boot into download mode or recovery mode, the Samsung logo comes up and the screen goes black. I'm pretty sure my phone is ****ed.
What was the last change you made? Also are you using the oem cable? Also, heres the link scroll down to section 5. http://forum.xda-developers.com/showthread.php?t=1762709
Surge1223
Hello I have tried to avoid posting this at all cost, however after days of relentless research I have drawn a blank. I have a friend who had a Verizon Galaxy S3 and when he went to reboot the phone it went into a boot-loop. Before I had a chance to look at his phone, he took it into a place to get it looked at. After taking it there they returned the phone to him and said that it was hopeless and now the phone would not boot, vibrate, or go into boot into download mode.Soon after this he bought a S4 and gave this one to me. I want to fix the phone so that I can give it to my wife to use, however I need to try to get it going from there. I know that the boot-loop problem was caused from a bad power button, which I successfully changed out. The phone was operating on 4.3 and was never hacked. After many hours of searching I found some really good debricking information including the debrick file for 4.3. I was able to finally get the phone to boot, but not very far, all I was able to get to come up is the following on the Display and I also included a pic:
Boot Recovery Mode
Check Boot Partitions.
Copy from T-Flash.
Boot Recovery..
Write 159488 sectors.
FLASH WRITE FAILURE
ODIN MODE
Product Name: SCH-I535
Custom Binary Download: No
Current Binary: Samsung Official
System Status: None
QUALQUAMM Secureboot: Enable
Warranty Bit: 0
BOOTLOADER RP SWREV: 1
This is the first instance when I have had to write a post for help and help I definitely need. Any help is greatly appreciated. Thank you
dkmac said:
Hello I have tried to avoid posting this at all cost, however after days of relentless research I have drawn a blank. I have a friend who had a Verizon Galaxy S3 and when he went to reboot the phone it went into a boot-loop. Before I had a chance to look at his phone, he took it into a place to get it looked at. After taking it there they returned the phone to him and said that it was hopeless and now the phone would not boot, vibrate, or go into boot into download mode.Soon after this he bought a S4 and gave this one to me. I want to fix the phone so that I can give it to my wife to use, however I need to try to get it going from there. I know that the boot-loop problem was caused from a bad power button, which I successfully changed out. The phone was operating on 4.3 and was never hacked. After many hours of searching I found some really good debricking information including the debrick file for 4.3. I was able to finally get the phone to boot, but not very far, all I was able to get to come up is the following on the Display and I also included a pic:
Boot Recovery Mode
Check Boot Partitions.
Copy from T-Flash.
Boot Recovery..
Write 159488 sectors.
FLASH WRITE FAILURE
ODIN MODE
Product Name: SCH-I535
Custom Binary Download: No
Current Binary: Samsung Official
System Status: None
QUALQUAMM Secureboot: Enable
Warranty Bit: 0
BOOTLOADER RP SWREV: 1
This is the first instance when I have had to write a post for help and help I definitely need. Any help is greatly appreciated. Thank you
Click to expand...
Click to collapse
you use Odin to flash stock 4.3?
-somebody- said:
you use Odin to flash stock 4.3?
Click to expand...
Click to collapse
Sorry forgot to mention that, yes I did try to use ODIN to flash the stock 4.3, when tried to flash, ODIN would come up with a fail every time. This is where I am really getting stuck. When I boot the phone with the SD card, the information that I gave earlier is all I can get the phone to do. I cannot flash anything to it and it will not go into download mode and I have nothing that I can select from on the phone. Thank you again.
Donny
dkmac said:
Sorry forgot to mention that, yes I did try to use ODIN to flash the stock 4.3, when tried to flash, ODIN would come up with a fail every time. This is where I am really getting stuck. When I boot the phone with the SD card, the information that I gave earlier is all I can get the phone to do. I cannot flash anything to it and it will not go into download mode and I have nothing that I can select from on the phone. Thank you again.
Donny
Click to expand...
Click to collapse
Try to use Odin again and flash the pit file with Odin along with the stock image.
http://forum.xda-developers.com/showthread.php?t=2586319
I'm confused what you're saying though, you can't enter download mode at all? That looks like you're in download mode.
Sent from my SCH-I535 using Tapatalk 2
There's no option in the recovery to boot into download mode? I had a similar problem with 2 older droids (Galaxy Proclaim and ZTE Merit). I screwed around and hard bricked one and soft bricked the other. One would turn on and vibrate but the lit up and stayed black and the other was stuck on a boot loop. Neither could boot into download mode.
Luckily a few days of googling and I found a solution with odin and adbtool... I was able to get them to detect the phones and I used the tool to force one into download mode and Odin to flash firmwares, bootloaders, and roms.
Also do you know was the phone rooted?
Well after several days of trying I am still at square one, I have read and read many post and cannot seem to get anywhere with this darn thing. I get nowhere with Kies, Verizon Tool hangs up at 83% and disconnects, and Odin will not flash anything including a new PIT, which is what it says my phone is missing. I have also attempted to NAND Erase all as suggested in one post and unchecked Re-Partition when trying to install the PIT and new stock ROM provided by the guides.
BadUserName, I was thinking that I was not in download mode because when my phone boots, it comes directly to the screen that I posted in my original post. At the top of the screen it says Boot Recovery Mode so I assumed that it was not in download mode because I never got the other screen that it should have booted to. Again the screen shot that I sent is the only screen that I am able to get it to boot to and will only boot when I use the SD card to boot it from. Any help is greatly appreciated, thank you and take care.
Donny
dkmac said:
Well after several days of trying I am still at square one, I have read and read many post and cannot seem to get anywhere with this darn thing. I get nowhere with Kies, Verizon Tool hangs up at 83% and disconnects, and Odin will not flash anything including a new PIT, which is what it says my phone is missing. I have also attempted to NAND Erase all as suggested in one post and unchecked Re-Partition when trying to install the PIT and new stock ROM provided by the guides.
BadUserName, I was thinking that I was not in download mode because when my phone boots, it comes directly to the screen that I posted in my original post. At the top of the screen it says Boot Recovery Mode so I assumed that it was not in download mode because I never got the other screen that it should have booted to. Again the screen shot that I sent is the only screen that I am able to get it to boot to and will only boot when I use the SD card to boot it from. Any help is greatly appreciated, thank you and take care.
Donny
Click to expand...
Click to collapse
Ya I don't think you're in download either.
So volume down + home + power boots you to that exact same screen?
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
Ya I don't think you're in download either.
So volume down + home + power boots you to that exact same screen?
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Yes, even if I boot holding down volume down + home + power it still boots to the same screen shown in the picture that I posted with the text that I posted in the OP. I know that it is having issues with the PIT, but no matter what I do it will not flash a new PIT. I am not sure what 1000phones did, but they did something nasty to this phone. I know the power button is now good because I replaced it with a new one and I am a experienced 2M tech and it responds when I only hit the power button, so I know that what ever the problem is it is software related. I have also tried multiple cords and computers to flash this phone with. All the correct drivers are installed. Again I greatly appreciate any and all help on this one.
Donny
dkmac said:
Yes, even if I boot holding down volume down + home + power it still boots to the same screen shown in the picture that I posted with the text that I posted in the OP. I know that it is having issues with the PIT, but no matter what I do it will not flash a new PIT. I am not sure what 1000phones did, but they did something nasty to this phone. I know the power button is now good because I replaced it with a new one and I am a experienced 2M tech and it responds when I only hit the power button, so I know that what ever the problem is it is software related. I have also tried multiple cords and computers to flash this phone with. All the correct drivers are installed. Again I greatly appreciate any and all help on this one.
Donny
Click to expand...
Click to collapse
Ya, well if you aren't in download mode you can't flash anything from Odin.
Can you make a USB jig from a micro USB cable and try to force it into download mode?
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
Ya, well if you aren't in download mode you can't flash anything from Odin.
Can you make a USB jig from a micro USB cable and try to force it into download mode?
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I am not too sure how to do that, all that I have read about and tried is using a class 10 micro sd with the debrick file for 4.3, which is what this phone has.
dkmac said:
I am not too sure how to do that, all that I have read about and tried is using a class 10 micro sd with the debrick file for 4.3, which is what this phone has.
Click to expand...
Click to collapse
That's for a hard brick, yours isn't quite hard bricked.
Look up how to make a USB jig, or you can buy it for cheap on Amazon and eBay, but that's what I would try next.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
That's for a hard brick, yours isn't quite hard bricked.
Look up how to make a USB jig, or you can buy it for cheap on Amazon and eBay, but that's what I would try next.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I did look at how to make one and it seems pretty straight forward and completely doable, however my phone will not even turn-on, vibrate, or charge without the debrick sd card. From what I understood is if the phone will not even respond to anything without the debrick SD in it, it is a hard brick. I am a Noob when it comes to this phone, I was able to help another friend out get his right up, but am stuck on this one. I am use to messing with HTC phones, so I am defiantly learning as I go with this one. Thank you again and do appreciate all your help.
Just added a screenshot of what ODIN is doing no matter whart I do to flash my phone.
Try checking re-partition?
Sent from my Nexus 7 using xda app-developers app
timedroid said:
Try checking re-partition?
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Unfortunately I have tried that with no luck. When I try flashing it with the re-partition checked, ODIN attempts to flash then immediately comes back with a fail. Never have I ran across such a stubborn phone when trying to repair or flash. I think that this is something that has a lot of people stumped at this point. I am still appreciative about any help that will lead me in the right direction. Tomorrow if I get a chance, I am thinking about going to Radio Shack to get the parts I need to build a jig to see if that does anything. Thank you and take care.
Donny
dkmac said:
Unfortunately I have tried that with no luck. When I try flashing it with the re-partition checked, ODIN attempts to flash then immediately comes back with a fail. Never have I ran across such a stubborn phone when trying to repair or flash. I think that this is something that has a lot of people stumped at this point. I am still appreciative about any help that will lead me in the right direction. Tomorrow if I get a chance, I am thinking about going to Radio Shack to get the parts I need to build a jig to see if that does anything. Thank you and take care.
Donny
Click to expand...
Click to collapse
Ya it isn't in download mode so it isn't going to flash.
I think you might be able to get a jtag repair to fix it at this point. I can't think of anything else. if it's hard bricked then you can get a riff box to force a bootloader transfer and boot from your internal card.
Maybe try doing the hardbrick method again after formating your external SD card. Sounds like you're doing everything right.
Sent from my SCH-I535 using Tapatalk 2
Seems like it is on download mode, but can't write anything. Have you tried with NAND erase all checked?
Sent from my SCH-I535 using xda app-developers app
timedroid said:
Seems like it is on download mode, but can't write anything. Have you tried with NAND erase all checked?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
It isn't in download mode, it doesn't say "do not turn off target" and it's displaying information about a recovery partition.
It's in some sort of system diagnostic mode. Never anything I've seen before.
Sent from my SCH-I535 using Tapatalk 2
timedroid said:
Seems like it is on download mode, but can't write anything. Have you tried with NAND erase all checked?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
As stated in one of my replied, I did attempt a NAND erase all but with no luck. All I got was a fail in ODIN and the phone displayed erasing in blue but does nothing else.
BadUsername said:
It isn't in download mode, it doesn't say "do not turn off target" and it's displaying information about a recovery partition.
It's in some sort of system diagnostic mode. Never anything I've seen before.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
That is why I started this thread, it is really weird. At first I thought that I was doing something wrong, so I formatted my SD card several times and reflashed the debrick file and got the same thing every time. What ever the phone repair place did to the phone they did it good. LikeI said, a brick like I have never seen. Thank you and please let me know if anyone can figure something out.
After doing some more research and trying, I am curious to know if it is possible to obtain a PIT from someones phone that has 4.3. When I look at all the available PIT files, they are from a while ago and none were extracted from a S3 with the new 4.3 OS on it. I am curious that since mine has this unique brick if a possible change was done to the new PIT file during the 4.3 update??? If anyone can post this for me it would be greatly appreciated. I figured at this point it would be worth a try.
Donny
dkmac said:
After doing some more research and trying, I am curious to know if it is possible to obtain a PIT from someones phone that has 4.3. When I look at all the available PIT files, they are from a while ago and none were extracted from a S3 with the new 4.3 OS on it. I am curious that since mine has this unique brick if a possible change was done to the new PIT file during the 4.3 update??? If anyone can post this for me it would be greatly appreciated. I figured at this point it would be worth a try.
Donny
Click to expand...
Click to collapse
I've got the exact same error screen you've run into. I've tried to NAND Erase All and that failed. Going to try re-partition now