[Q] General HEX Editing question - General Questions and Answers
I'm changing proxy addresses on a Casio C731 Rock... in mass quantities. DLL wont read on CHMC Lab edition so resorting to HEX editing.. yeay.
When I change the proxies in the HEX it takes fine but the phone only reads 13 characters (size of the oem proxy) so I know its only a simple digit telling the phone how many characters to allow in this field... I thought it was the 3rd byte but in this HEX the 3rd byte is the start of the actual proxy address..
What I'm working with:
Stock:
[NV Items]
[Complete items - 2]
7541 (0x1D75) - OK
0D 67 77 2E 76 7A 77 77 61 70 2E 63 6F 6D 00 31
00 2E 76 74 65 78 74 2E 63 6F 6D 2F 70 63 64 2F
63 37 33 31 2F 63 37 33 31 2E 78 6D 6C 00 44 4D
02 34 35 00 44 32 00 09 43 44 4D 41 02 34 35 00
31 00 08 43 44 4D 41 5F 02 34 35 00 00 09 43 44
4D 41 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00
7542 (0x1D76) - OK
0E 67 77 31 2E 76 7A 77 77 61 70 2E 63 6F 6D 00
00 2E 76 74 65 78 74 2E 63 6F 6D 2F 70 63 64 2F
63 37 33 31 2F 63 37 33 31 2E 78 6D 6C 00 44 4D
02 34 35 00 44 32 00 09 43 44 4D 41 02 34 35 00
31 00 08 43 44 4D 41 5F 02 34 35 00 00 09 43 44
4D 41 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00
Modified with desired proxy:
[NV Items]
[Complete items - 2]
7541 (0x1D75) - OK
0d 70 70 63 67 77 31 2e 76 7a 77 72 65 73 65 6c
6c 65 72 2e 63 6f 6d 00 31 00 00 00 00 00 00 00
00 2E 76 74 65 78 74 2E 63 6F 6D 2F 70 63 64 2F
63 37 33 31 2F 63 37 33 31 2E 78 6D 6C 00 44 4D
02 34 35 00 44 32 00 09 43 44 4D 41 02 34 35 00
31 00 08 43 44 4D 41 5F 02 34 35 00 00 09 43 44
4D 41 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7542 (0x1D76) - OK
0e 70 70 63 67 77 32 2e 76 7a 77 72 65 73 65 6c
6c 65 72 2e 63 6f 6d 00 00 00 00 00 00 00 00 00
00 2E 76 74 65 78 74 2E 63 6F 6D 2F 70 63 64 2F
63 37 33 31 2F 63 37 33 31 2E 78 6D 6C 00 44 4D
02 34 35 00 44 32 00 09 43 44 4D 41 02 34 35 00
31 00 08 43 44 4D 41 5F 02 34 35 00 00 09 43 44
4D 41 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Any help would be greatly appreciated - thanks for looking
Related
Strange SD card problem in Bootloader (SOLVED)
This is wat I have done: With romupdate I made a backup on 512MB SD Card Put SD card away Installed TMob rom, all ok. Tmobile is too pink for me so I wanted to install my old rom Put in SD card and immediatedly bootloader says SD card, update blabla and it worked. ---- Now I want to have that bigstorage. I ntrw'd the SDcard to a file, opened it with hexeditor, changed the 2 020008000 thingies, saved it and ntrw'd it back onto the SDcard. Sow, when inserted in bootloader, it just sais SERIAL V1.02 When I remove the card very sometimes it THEN IMMEDIATELDY askes to install, but than sections=1 and read card is fail. Somtimes when removing and reinserting it sais ROM size not enough. What should I do? I tried everything. Should I keep my old rom and forget the big storage?
I tried leaving the phone for 1 night in the bootloader, hoping next morning it would say SD update. It left me with a drained battery (0%!) it wouldn't reset anymore until I plugged the device in te loader, I had it fully recharged. Strange.
Ok. I think this could be a problem. My SD image looks like this (first somewhat 500 bytes Code: 4d 41 47 49 43 49 41 4e 20 20 20 20 20 20 20 20 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 31 2e 30 32 20 20 20 20 20 20 20 20 20 20 20 20 25 8e f4 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 9e 8a c5 37 53 41 30 30 d8 00 45 07 00 06 7d 77 57 00 3c 27 bf 22 e7 00 07 b4 2e 0b 19 96 d8 bb 88 ef c3 dd 49 c6 26 3a 50 e6 00 1c b8 2f 59 e0 27 ec 45 f2 af 00 00 f9 ab 7a ca 4e 5a 9d 0f b3 cc 00 00 00 00 9d a8 a3 51 99 3f 82 07 ba 4d 40 51 00 ff e9 5c 9a 8b 67 bb 3a b9 f5 09 a9 a3 d6 69 74 71 4f 17 46 a3 2e 4e ee 8e 61 e8 f3 b0 a5 cc cb d6 1c b5 59 d0 47 1a ea 9f 29 4f 84 2e cc b3 d0 b1 a5 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10 f0 48 cd 47 ab 32 f5 57 1e 36 1a 99 8c 93 4c 67 35 9d 60 d3 34 10 f3 99 a8 a4 ab 53 12 e1 c0 ec fe 35 bb 57 e6 44 7e 81 53 7f 85 84 45 f8 6b 1d d5 74 b0 60 19 c2 b9 aa 48 4c 18 d8 1e ec 0e b6 82 01 4e ba 67 c1 04 f3 f0 d1 16 3c d7 13 aa b5 0f bf e8 74 a8 b5 01 77 f4 11 70 dd e8 00 80 56 c4 d3 0e d9 f7 52 90 95 3c 53 56 29 0a 8b 10 48 54 43 53 41 30 30 34 30 30 30 30 30 33 46 43 30 30 30 30 30 43 46 34 38 45 32 35 fe 03 00 ea 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 45 43 45 43 34 ec 0d 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 56 4f 44 41 50 30 30 cant get the text copied, but when I encode it to a /nbf file, with good romdumps it shows the operator and things, now it shows garbage: Code: Good one: deviceId=PM10A cellOpName=T-MOB005 language=WWE firmwareVersion=1.13.00 deviceModelName=Magician address0=0 address1=0 address2=0 crc32=6448ae5b File crc32: dd221a2f Code: My own: deviceId=MAGICIAN cellOpName=0000000000000000 language=1.02 firmwareVersion= %Ķ♀ deviceModelName= address0= address1= address2= crc32= File crc32: 148cd320 Where dit it go wrong??? ntrw, romupdate.exe? It's a bit scrambled.
It wás the problem. What I did: FOrmat SD card Get rom on SD card with romupdate ntrw it to disk used hexedit to remove the 400meg of zero's (512mb sdcard) ran mksBigStoragerENG.exe from ftp site for patch it bigstorage and so, format SD card again ntrw new patched file to SD put it in Magician, start bootloader, and in 10 sec SD UPDATE and off it goes, now 51%... Wish me luck!
Yes, done it. Now have Dutch Vodafone 1.12 ROM with 1.12 Radio, extended rom is on my harddisk and bigstorage. If someone wants this ROM please let me know, have no fast connection but then I will upload it at night.
Thanks for your thoughtfulness but I believe ROM 1.12 with Radio 1.12 is already in the ftp. In fact, the latest ROM version is 1.13 with Radio 1.12, but there's a stand alone Radio 1.13.
Well I'm happy it worked this way. There were some people struggling to get the SD card to update, this should do the trick then. I tried everything else And I had some problems with pushmanager + bluesoleil in 1.13 (no vodafone?) which I dont have now. Maybe it was not the 1.13 fault, but ey, what's the difference?
Nghianha WM6 Rom
hi everybody, because there is also another WM6 Rom from smart, lets talk here about Nghiangas Rom John
what's the differents?
Has anyone managed to import the soundreg fix? Resco Explorer gives an error when trying to import the file, while PHM registry editor has the Import function grayed out. So opened the reg file and found it to contain the following: Code: [HKEY_LOCAL_MACHINE\Snd] [HKEY_LOCAL_MACHINE\Snd\Event] ".AllSounds"=hex(7):\ 41 00 73 00 74 00 65 00 72 00 69 00 73 00 6B \ 00 00 00 43 00 6C 00 6F 00 73 00 65 00 00 00 \ 63 00 72 00 69 00 74 00 69 00 63 00 61 00 6C \ 00 00 00 64 00 65 00 66 00 61 00 75 00 6C 00 \ 74 00 00 00 45 00 6D 00 70 00 74 00 79 00 00 \ 00 65 00 78 00 63 00 6C 00 61 00 6D 00 00 00 \ 69 00 6E 00 66 00 62 00 65 00 67 00 00 00 69 \ 00 6E 00 66 00 65 00 6E 00 64 00 00 00 69 00 \ 6E 00 66 00 69 00 6E 00 74 00 72 00 00 00 4D \ 00 65 00 6E 00 75 00 50 00 6F 00 70 00 00 00 \ 4D 00 65 00 6E 00 75 00 53 00 65 00 6C 00 00 \ 00 4F 00 70 00 65 00 6E 00 50 00 72 00 6F 00 \ 67 00 00 00 71 00 75 00 65 00 73 00 74 00 69 \ 00 6F 00 6E 00 00 00 4E 00 65 00 74 00 62 00 \ 65 00 67 00 00 00 4E 00 65 00 74 00 65 00 6E \ 00 64 00 00 00 4E 00 65 00 74 00 69 00 6E 00 \ 74 00 72 00 00 00 73 00 74 00 61 00 72 00 74 \ 00 75 00 70 00 00 00 57 00 69 00 6E 00 64 00 \ 4D 00 61 00 78 00 00 00 57 00 69 00 6E 00 64 \ 00 4D 00 69 00 6E 00 00 00 52 00 65 00 63 00 \ 53 00 74 00 61 00 72 00 74 00 00 00 52 00 65 \ 00 63 00 45 00 6E 00 64 00 00 00 00 00 ".Scheme"=".AllSounds" "Curr0"=hex(7):\ 61 00 6C 00 61 00 72 00 6D 00 32 00 00 00 00 \ 00 61 00 6C 00 61 00 72 00 6D 00 32 00 00 00 \ 64 00 65 00 66 00 61 00 75 00 6C 00 74 00 00 \ 00 45 00 6D 00 70 00 74 00 79 00 00 00 61 00 \ 6C 00 61 00 72 00 6D 00 32 00 00 00 69 00 6E \ 00 66 00 62 00 65 00 67 00 00 00 69 00 6E 00 \ 66 00 65 00 6E 00 64 00 00 00 69 00 6E 00 66 \ 00 65 00 6E 00 64 00 00 00 00 00 00 00 00 00 \ 61 00 6C 00 61 00 72 00 6D 00 32 00 00 00 69 \ 00 6E 00 66 00 62 00 65 00 67 00 00 00 69 00 \ 6E 00 66 00 65 00 6E 00 64 00 00 00 69 00 6E \ 00 66 00 65 00 6E 00 64 00 00 00 61 00 6C 00 \ 61 00 72 00 6D 00 32 00 00 00 00 00 00 00 76 \ 00 6F 00 69 00 63 00 62 00 65 00 65 00 70 00 \ 00 00 52 00 65 00 63 00 45 00 6E 00 64 00 00 \ 00 00 00 "EventCache"=dword:00000600 "EventMask"=dword:00ffffff [HKEY_LOCAL_MACHINE\Snd\Scheme] ".AllSounds"="All Sounds" "Curr0"="Current Settings" [HKEY_LOCAL_MACHINE\Snd\Support] "SupportLevel"=dword:00000002 "VibSup"=dword:00000001 I tried entering them manually, entered Sounds and Notifications and pressed OK, but still no sound when I press the Start button. Anyone can maybe make a cab file that installs these registry entries? I've never done a cab file for CE myself but will be giving it a go in the meantime.
mn6 doesn't install under wm6. any solution????????? need a navigation software that works under wm6
Same here, I oalso could not import the regisry file
Igo and Route 66 ndCChris said: mn6 doesn't install under wm6. any solution????????? need a navigation software that works under wm6 Click to expand... Click to collapse I use last Nghianga wm6 rom. Igo and Route 66 work OK.
kta said: Has anyone managed to import the soundreg fix? Resco Explorer gives an error when trying to import the file, while PHM registry editor has the Import function grayed out. So opened the reg file and found it to contain the following: Code: [HKEY_LOCAL_MACHINE\Snd] [HKEY_LOCAL_MACHINE\Snd\Event] ".AllSounds"=hex(7):\ 41 00 73 00 74 00 65 00 72 00 69 00 73 00 6B \ 00 00 00 43 00 6C 00 6F 00 73 00 65 00 00 00 \ 63 00 72 00 69 00 74 00 69 00 63 00 61 00 6C \ 00 00 00 64 00 65 00 66 00 61 00 75 00 6C 00 \ 74 00 00 00 45 00 6D 00 70 00 74 00 79 00 00 \ 00 65 00 78 00 63 00 6C 00 61 00 6D 00 00 00 \ 69 00 6E 00 66 00 62 00 65 00 67 00 00 00 69 \ 00 6E 00 66 00 65 00 6E 00 64 00 00 00 69 00 \ 6E 00 66 00 69 00 6E 00 74 00 72 00 00 00 4D \ 00 65 00 6E 00 75 00 50 00 6F 00 70 00 00 00 \ 4D 00 65 00 6E 00 75 00 53 00 65 00 6C 00 00 \ 00 4F 00 70 00 65 00 6E 00 50 00 72 00 6F 00 \ 67 00 00 00 71 00 75 00 65 00 73 00 74 00 69 \ 00 6F 00 6E 00 00 00 4E 00 65 00 74 00 62 00 \ 65 00 67 00 00 00 4E 00 65 00 74 00 65 00 6E \ 00 64 00 00 00 4E 00 65 00 74 00 69 00 6E 00 \ 74 00 72 00 00 00 73 00 74 00 61 00 72 00 74 \ 00 75 00 70 00 00 00 57 00 69 00 6E 00 64 00 \ 4D 00 61 00 78 00 00 00 57 00 69 00 6E 00 64 \ 00 4D 00 69 00 6E 00 00 00 52 00 65 00 63 00 \ 53 00 74 00 61 00 72 00 74 00 00 00 52 00 65 \ 00 63 00 45 00 6E 00 64 00 00 00 00 00 ".Scheme"=".AllSounds" "Curr0"=hex(7):\ 61 00 6C 00 61 00 72 00 6D 00 32 00 00 00 00 \ 00 61 00 6C 00 61 00 72 00 6D 00 32 00 00 00 \ 64 00 65 00 66 00 61 00 75 00 6C 00 74 00 00 \ 00 45 00 6D 00 70 00 74 00 79 00 00 00 61 00 \ 6C 00 61 00 72 00 6D 00 32 00 00 00 69 00 6E \ 00 66 00 62 00 65 00 67 00 00 00 69 00 6E 00 \ 66 00 65 00 6E 00 64 00 00 00 69 00 6E 00 66 \ 00 65 00 6E 00 64 00 00 00 00 00 00 00 00 00 \ 61 00 6C 00 61 00 72 00 6D 00 32 00 00 00 69 \ 00 6E 00 66 00 62 00 65 00 67 00 00 00 69 00 \ 6E 00 66 00 65 00 6E 00 64 00 00 00 69 00 6E \ 00 66 00 65 00 6E 00 64 00 00 00 61 00 6C 00 \ 61 00 72 00 6D 00 32 00 00 00 00 00 00 00 76 \ 00 6F 00 69 00 63 00 62 00 65 00 65 00 70 00 \ 00 00 52 00 65 00 63 00 45 00 6E 00 64 00 00 \ 00 00 00 "EventCache"=dword:00000600 "EventMask"=dword:00ffffff [HKEY_LOCAL_MACHINE\Snd\Scheme] ".AllSounds"="All Sounds" "Curr0"="Current Settings" [HKEY_LOCAL_MACHINE\Snd\Support] "SupportLevel"=dword:00000002 "VibSup"=dword:00000001 I tried entering them manually, entered Sounds and Notifications and pressed OK, but still no sound when I press the Start button. Anyone can maybe make a cab file that installs these registry entries? I've never done a cab file for CE myself but will be giving it a go in the meantime. Click to expand... Click to collapse I tied to import the registry using SKTools and it didn't return any error, but still no sound on the start menu...
ndCChris said: mn6 doesn't install under wm6. any solution????????? need a navigation software that works under wm6 Click to expand... Click to collapse mn6 together wm6 functions, but does not run mn 6.1. Tomtom 6 also runs
Password Issue... Hi, I installed this ROM last night and this morning the phone wouldn't unlock at all had to hard reset. Has anyone else had this problem? If so does anyone know of a fix for this? Thanks.
kta said: Has anyone managed to import the soundreg fix? Resco Explorer gives an error when trying to import the file, while PHM registry editor has the Import function grayed out. So opened the reg file and found it to contain the following: Code: [HKEY_LOCAL_MACHINE\Snd] [HKEY_LOCAL_MACHINE\Snd\Event] ".AllSounds"=hex(7):\ 41 00 73 00 74 00 65 00 72 00 69 00 73 00 6B \ 00 00 00 43 00 6C 00 6F 00 73 00 65 00 00 00 \ 63 00 72 00 69 00 74 00 69 00 63 00 61 00 6C \ 00 00 00 64 00 65 00 66 00 61 00 75 00 6C 00 \ 74 00 00 00 45 00 6D 00 70 00 74 00 79 00 00 \ 00 65 00 78 00 63 00 6C 00 61 00 6D 00 00 00 \ 69 00 6E 00 66 00 62 00 65 00 67 00 00 00 69 \ 00 6E 00 66 00 65 00 6E 00 64 00 00 00 69 00 \ 6E 00 66 00 69 00 6E 00 74 00 72 00 00 00 4D \ 00 65 00 6E 00 75 00 50 00 6F 00 70 00 00 00 \ 4D 00 65 00 6E 00 75 00 53 00 65 00 6C 00 00 \ 00 4F 00 70 00 65 00 6E 00 50 00 72 00 6F 00 \ 67 00 00 00 71 00 75 00 65 00 73 00 74 00 69 \ 00 6F 00 6E 00 00 00 4E 00 65 00 74 00 62 00 \ 65 00 67 00 00 00 4E 00 65 00 74 00 65 00 6E \ 00 64 00 00 00 4E 00 65 00 74 00 69 00 6E 00 \ 74 00 72 00 00 00 73 00 74 00 61 00 72 00 74 \ 00 75 00 70 00 00 00 57 00 69 00 6E 00 64 00 \ 4D 00 61 00 78 00 00 00 57 00 69 00 6E 00 64 \ 00 4D 00 69 00 6E 00 00 00 52 00 65 00 63 00 \ 53 00 74 00 61 00 72 00 74 00 00 00 52 00 65 \ 00 63 00 45 00 6E 00 64 00 00 00 00 00 ".Scheme"=".AllSounds" "Curr0"=hex(7):\ 61 00 6C 00 61 00 72 00 6D 00 32 00 00 00 00 \ 00 61 00 6C 00 61 00 72 00 6D 00 32 00 00 00 \ 64 00 65 00 66 00 61 00 75 00 6C 00 74 00 00 \ 00 45 00 6D 00 70 00 74 00 79 00 00 00 61 00 \ 6C 00 61 00 72 00 6D 00 32 00 00 00 69 00 6E \ 00 66 00 62 00 65 00 67 00 00 00 69 00 6E 00 \ 66 00 65 00 6E 00 64 00 00 00 69 00 6E 00 66 \ 00 65 00 6E 00 64 00 00 00 00 00 00 00 00 00 \ 61 00 6C 00 61 00 72 00 6D 00 32 00 00 00 69 \ 00 6E 00 66 00 62 00 65 00 67 00 00 00 69 00 \ 6E 00 66 00 65 00 6E 00 64 00 00 00 69 00 6E \ 00 66 00 65 00 6E 00 64 00 00 00 61 00 6C 00 \ 61 00 72 00 6D 00 32 00 00 00 00 00 00 00 76 \ 00 6F 00 69 00 63 00 62 00 65 00 65 00 70 00 \ 00 00 52 00 65 00 63 00 45 00 6E 00 64 00 00 \ 00 00 00 "EventCache"=dword:00000600 "EventMask"=dword:00ffffff [HKEY_LOCAL_MACHINE\Snd\Scheme] ".AllSounds"="All Sounds" "Curr0"="Current Settings" [HKEY_LOCAL_MACHINE\Snd\Support] "SupportLevel"=dword:00000002 "VibSup"=dword:00000001 I tried entering them manually, entered Sounds and Notifications and pressed OK, but still no sound when I press the Start button. Anyone can maybe make a cab file that installs these registry entries? I've never done a cab file for CE myself but will be giving it a go in the meantime. Click to expand... Click to collapse I had to put a header in the file like this.. then it worked Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\Snd] [HKEY_LOCAL_MACHINE\Snd\Scheme] ".AllSounds"="All Sounds" [HKEY_LOCAL_MACHINE\Snd\Event] ".Scheme"=".AllSounds" ".AllSounds"=hex(7):41,00,73,00,74,00,65,00,72,00,69,00,73,00,6B,00,00,00,43,00,6C,00,6F,\ 00,73,00,65,00,00,00,63,00,72,00,69,00,74,00,69,00,63,00,61,00,6C,00,00,00,\ 64,00,65,00,66,00,61,00,75,00,6C,00,74,00,00,00,45,00,6D,00,70,00,74,00,79,\ 00,00,00,65,00,78,00,63,00,6C,00,61,00,6D,00,00,00,69,00,6E,00,66,00,62,00,\ 65,00,67,00,00,00,69,00,6E,00,66,00,65,00,6E,00,64,00,00,00,69,00,6E,00,66,\ 00,69,00,6E,00,74,00,72,00,00,00,4D,00,65,00,6E,00,75,00,50,00,6F,00,70,00,\ 00,00,4D,00,65,00,6E,00,75,00,53,00,65,00,6C,00,00,00,4F,00,70,00,65,00,6E,\ 00,50,00,72,00,6F,00,67,00,00,00,71,00,75,00,65,00,73,00,74,00,69,00,6F,00,\ 6E,00,00,00,4E,00,65,00,74,00,62,00,65,00,67,00,00,00,4E,00,65,00,74,00,65,\ 00,6E,00,64,00,00,00,4E,00,65,00,74,00,69,00,6E,00,74,00,72,00,00,00,73,00,\ 74,00,61,00,72,00,74,00,75,00,70,00,00,00,57,00,69,00,6E,00,64,00,4D,00,61,\ 00,78,00,00,00,57,00,69,00,6E,00,64,00,4D,00,69,00,6E,00,00,00,52,00,65,00,\ 63,00,53,00,74,00,61,00,72,00,74,00,00,00,52,00,65,00,63,00,45,00,6E,00,64,\ 00,00,00,00 "EventMask"=dword:00FFFFFF "EventCache"=dword:00000600 [HKEY_LOCAL_MACHINE\Snd\Support] "VibSup"=dword:00000001 "SupportLevel"=dword:00000002
I am having bluetooth and wifi issues. Sometimes (not always) after a soft reset, my headset still shows as paired but the phone is not able to see it there. I have to remove the pairing and repair. Wifi also seems to forget my WEP code each time. Anyone have or have resolved these issues? O2 Neo G4 Cheers
Hi....Just installed this ROM a few hours ago....everything seems to be working fine....except for Live Messenger....and windows updates... are these known issues?? If there are any fixes/patches, would appreciate a link to info on the smae...Many Thanks
mrao said: Hi....Just installed this ROM a few hours ago....everything seems to be working fine....except for Live Messenger....and windows updates... are these known issues?? If there are any fixes/patches, would appreciate a link to info on the smae...Many Thanks Click to expand... Click to collapse There is no fix for those issues at the moment. The MSN issue has to do with the fact that the Model Name is not specified correctly in this ROM.
This ROM works better for me than SMART1's ROM. Except from the IR problem I also have the problem of disappearing messages When I soft reset using the Stylus SMS messages disappear, however when I'm reseting my device using f.e. PHM Power Toys the messages won't disappear..
mccune said: This ROM works better for me than SMART1's ROM. Except from the IR problem I also have the problem of disappearing messages When I soft reset using the Stylus SMS messages disappear, however when I'm reseting my device using f.e. PHM Power Toys the messages won't disappear.. Click to expand... Click to collapse When I first upgraded from WM2003 to WM5, I had the same problem. But it turns out it's because of delayed write to the flash if you soft reset to quickly. Now I always reset via Wisbar lite soft reset.
Well i've read that now quite some times and there is one thing that pops straight into my mind when reading all the "i'm loosing my data" stuff. I assume quite some people use the registry performance tweaks available. Afaiu at least 1 of these enalbes cached writing! Well it's fine to cache data when it comes to performance (no matter if you're reading or writing it), there are quite some reasons why it's speeding things up things BUT: Everytime you are caching Data on a non-persistant Storage you risk loosing that data when resetting before everything ist written back to persistant storage. And i assume that could be pretty the reason why some people are loosing their data. The System or an Application freezes for some reason, People are softresetting, and everything that was in the cache at that point ist simply lost. That doesn't happen when you're shutting down the system regularly cos' it writes back everything then, but on resetting it can't (which is quite obvious). And that's the point why i never thought about enabling caching. BTW: Some of you may know that from external Harddrives (USB/Firewire) If you enable Cached Writing they are WAY faster than without, BUT if someone just plugs em out without releasing them before you loose data (cos of open MFT, partially written data etc).
Goldcard Example for G1
Hi, I'm an Australian user of the Optus Dream / G1. I've searched on here as well as Google in general to try and find an example of a goldcard. Whenever I make mine, windows *****es that it cannot read the device to load the dreaming file on. I just want to find out if i'm on the right track. Ok, so here's the CID straight from terminal emulator: Code: 0353445355303147801060c16d009198 and now, reversed with 00 at the start: Code: 0091006dc16010804731305553445303 I load this into qmat and generate this goldcard: Code: 6F E9 DB F4 62 CF 43 51 09 60 42 63 C6 5E 17 A8 39 68 F0 67 A8 40 85 41 4D BE 7D 74 2E 28 81 02 FB 98 90 61 C8 DD 02 A0 46 12 FF AB 02 F6 E9 0A C3 37 09 00 7D 62 10 4C 3F 66 F2 F2 D5 D2 F8 0E 67 FD DC 18 4E D8 B3 49 74 AA 58 B9 06 9E 57 E8 79 A8 30 A7 E8 80 C5 81 8D FE BD B4 6E 68 C1 42 3B D8 D0 A1 08 0D 2B 96 97 30 4F 19 52 54 F9 4A 03 77 49 40 BD A2 50 8C 7F A6 32 32 92 ED AB F4 53 41 30 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 5F 00 9E 00 00 00 00 00 00 75 00 00 00 00 A5 7E 00 00 00 00 00 00 00 00 00 00 D8 2D 00 00 00 00 00 00 00 00 00 00 8F CD 07 42 00 00 00 00 00 00 00 00 00 00 00 00 82 00 00 00 00 00 00 00 00 00 00 00 00 00 00 52 28 7D 3C 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 FF FF FF FF FF FF FF FF 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 (the goldcard is x180 long) This is what the first x180 of my SD card looks like when it is freshly formatted to FAT32 and opened in hxD: Code: EB 58 90 4D 53 44 4F 53 35 2E 30 00 02 08 0C 11 02 00 00 00 00 F8 00 00 3F 00 FF 00 00 20 00 00 BB 06 1E 00 7A 07 00 00 00 00 00 00 02 00 00 00 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 29 C6 28 D5 F6 4E 4F 20 4E 41 4D 45 20 20 20 20 46 41 54 33 32 20 20 20 33 C9 8E D1 BC F4 7B 8E C1 8E D9 BD 00 7C 88 4E 02 8A 56 40 B4 41 BB AA 55 CD 13 72 10 81 FB 55 AA 75 0A F6 C1 01 74 05 FE 46 02 EB 2D 8A 56 40 B4 08 CD 13 73 05 B9 FF FF 8A F1 66 0F B6 C6 40 66 0F B6 D1 80 E2 3F F7 E2 86 CD C0 ED 06 41 66 0F B7 C9 66 F7 E1 66 89 46 F8 83 7E 16 00 75 38 83 7E 2A 00 77 32 66 8B 46 1C 66 83 C0 0C BB 00 80 B9 01 00 E8 2B 00 E9 2C 03 A0 FA 7D B4 7D 8B F0 AC 84 C0 74 17 3C FF 74 09 B4 0E BB 07 00 CD 10 EB EE A0 FB 7D EB E5 A0 F9 7D EB E0 98 CD 16 CD 19 66 60 80 7E 02 00 0F 84 20 00 66 6A 00 66 50 06 53 66 68 10 00 01 00 B4 42 8A 56 40 8B F4 CD 13 66 58 66 58 66 58 66 58 EB 33 66 3B 46 F8 72 03 F9 EB 2A 66 33 D2 66 0F B7 4E 18 66 F7 F1 FE C2 8A CA 66 8B D0 66 C1 EA 10 F7 76 1A 86 D6 8A 56 40 8A E8 C0 E4 06 0A CC B8 01 02 CD 13 66 61 0F 82 75 FF 81 C3 00 02 66 40 49 75 94 C3 42 4F 4F 54 4D 47 52 20 20 20 20 00 00 00 00 00 00 00 00 00 00 00 00 Now, various instructions (that I cannot link to being a new user) I have seen say to copy the first x170 of the goldcard to the sdcard. But the goldcard is x180 long??? Anyway, I've tried both (copying x180 and x170), and that doesn't work. I've tried adding replacing the first byte of the reversed CID with "00", and not replacing it, and neither work. TL;DR: Does the above goldcard and unmodified SD card look like yours?
can't you just flash that nbh img from bootloader? not sure how much different australian g1s from US. but I didn't use gold card in rooting my g1.
Did you try this?
xtenpeben said: can't you just flash that nbh img from bootloader? not sure how much different australian g1s from US. but I didn't use gold card in rooting my g1. Click to expand... Click to collapse I tried that, but when I reboot and hold the camera button it comes up and says "Not allowed" nk111 said: Did you try this? Click to expand... Click to collapse Yes I tried the online goldcard generator, same results on all fronts. I have also tried different SD Cards, a 2gb Kingston and a 1gb sandisk
The best this is to use qmat to do the reverse string thingie. I had done it a lot of times manually, but failed every time. After using qmat I got it to work.
Hello, I can not check your goldcard right now because I am on my phone, but I think this is not your problem. If windows complains about beeing not able to read the drive, you most likely copied your goldcard to the wrong part of the disk. You have to overwrite the first 170 Byte of your sd Card. It is important that you do not choose the logical drive (say drive letter e: for example) but the actual physical drive with your sdcard (should not have a drive letter) I just assume this is your problem. Maybe you could pos the first bytes of your selected drive and tell us what you did. edit: ah you did post that. The first bytes should be a bunch of 0s. Check what I stated above and tell us if you still have problems.
Please try my software: http://www.mediafire.com/download.php?mzqdyrtmimj
I bet its wether a mistake in the transcription of the CID or you havent used the physical drive. If the sd card has to be formated, it wont work.
I just got mine to work. My problem was same as yours, my mistake was using "logical disk" instead of physical in HxD. I also switched my sd card to older 1gb that I formatted first in a camera (fat16) then formatted in vista to fat32 right before writing the 170 bytes (length: 180). Save after you copy paste the hex but dont close. put the DREAIMG.nhb on it first then close HxD, then "safely remove" This worked for me but I struggled until I got here, made so many mistakes. Good Luck.
goldcard is really x180 long just copy all 00 00 00 00 ... from x170 to x180 and save thanks man you are the best
you have an extra 3 at the end in the reversed code.. lol
How do I change this font?
I'm trying to change the font color in the notification bar that says when you are downloading/installing a new app, and when you get an email, and when you plug in your USB and so forth. I'm not sure if it's part of the framework or services or a crazy mod with XML editing and re-compiling apk's like in the BlueSteel thread. I still want to keep everything else in the pull down bar the same though...
Explodee said: I'm trying to change the font color in the notification bar that says when you are downloading/installing a new app, and when you get an email, and when you plug in your USB and so forth. I'm not sure if it's part of the framework or services or a crazy mod with XML editing and re-compiling apk's like in the BlueSteel thread. I still want to keep everything else in the pull down bar the same though... Click to expand... Click to collapse So your not dead I was about to call in a search party! O, and i dunno about the font... Im guessing its tied in with all the other fonts and to change that one the system font must be changed.
Haha zombiefied and running 2.2 finally. Workin on Froyo Dynamite, stay tuned...
Anybody? This is the last thing I need before my theme can be completed...
It's an XML edit. Look in framewrok-res.apk > res > layout > status_bar_latest_event.xml. Open it in a Hex editor, and look for the values 08 00 00 1C, everything after that should be 00 00 00. Change the 00 00 00s to FF FF FF. Or you can download the framework-res.apk from my SenseX theme, and just swap out the images.
I think he was asking about actual fonts, not color. Fonts are located in system/fonts pull them from your phone, look at which one is the one that needs to be changed then push the one you want (with correct file name of course )
I actually did mean the color. Thanks guys Sent from my DROIDX
I'm having some trouble finding the string. I don't see anywhere in here 08 00 00 1C. I also put the file from the SenseX theme in there an there was no difference when I pushed framework-res.apk. 03 00 08 00 50 03 00 00 01 00 1C 00 38 01 00 00 0E 00 00 00 00 00 00 00 00 01 00 00 54 00 00 00 00 00 00 00 00 00 00 00 0F 00 00 00 1F 00 00 00 2D 00 00 00 32 00 00 00 3F 00 00 00 4B 00 00 00 57 00 00 00 66 00 00 00 70 00 00 00 9D 00 00 00 A0 00 00 00 AF 00 00 00 DA 00 00 00 0C 0C 6C 61 79 6F 75 74 5F 77 69 64 74 68 00 0D 0D 6C 61 79 6F 75 74 5F 68 65 69 67 68 74 00 0B 0B 6F 72 69 65 6E 74 61 74 69 6F 6E 00 02 02 69 64 00 0A 0A 62 61 63 6B 67 72 6F 75 6E 64 00 09 09 66 6F 63 75 73 61 62 6C 65 00 09 09 63 6C 69 63 6B 61 62 6C 65 00 0C 0C 70 61 64 64 69 6E 67 52 69 67 68 74 00 07 07 61 6E 64 72 6F 69 64 00 2A 2A 68 74 74 70 3A 2F 2F 73 63 68 65 6D 61 73 2E 61 6E 64 72 6F 69 64 2E 63 6F 6D 2F 61 70 6B 2F 72 65 73 2F 61 6E 64 72 6F 69 64 00 00 00 00 0C 0C 4C 69 6E 65 61 72 4C 61 79 6F 75 74 00 28 28 63 6F 6D 2E 61 6E 64 72 6F 69 64 2E 73 65 72 76 65 72 2E 73 74 61 74 75 73 2E 4C 61 74 65 73 74 49 74 65 6D 56 69 65 77 00 04 04 56 69 65 77 00 00 00 00 80 01 08 00 28 00 00 00 F4 00 01 01 F5 00 01 01 C4 00 01 01 D0 00 01 01 D4 00 01 01 DA 00 01 01 E5 00 01 01 D8 00 01 01 00 01 10 00 18 00 00 00 01 00 00 00 FF FF FF FF 08 00 00 00 09 00 00 00 02 01 10 00 60 00 00 00 01 00 00 00 FF FF FF FF FF FF FF FF 0B 00 00 00 14 00 14 00 03 00 00 00 00 00 00 00 09 00 00 00 02 00 00 00 FF FF FF FF 08 00 00 10 01 00 00 00 09 00 00 00 00 00 00 00 FF FF FF FF 08 00 00 10 FF FF FF FF 09 00 00 00 01 00 00 00 FF FF FF FF 08 00 00 05 02 41 00 00 02 01 10 00 B0 00 00 00 07 00 00 00 FF FF FF FF FF FF FF FF 0C 00 00 00 14 00 14 00 07 00 00 00 00 00 00 00 09 00 00 00 03 00 00 00 FF FF FF FF 08 00 00 01 02 00 02 01 09 00 00 00 04 00 00 00 FF FF FF FF 08 00 00 01 8C 00 08 01 09 00 00 00 07 00 00 00 FF FF FF FF 08 00 00 05 02 06 00 00 09 00 00 00 05 00 00 00 FF FF FF FF 08 00 00 12 FF FF FF FF 09 00 00 00 06 00 00 00 FF FF FF FF 08 00 00 12 FF FF FF FF 09 00 00 00 00 00 00 00 FF FF FF FF 08 00 00 10 FF FF FF FF 09 00 00 00 01 00 00 00 FF FF FF FF 08 00 00 05 02 40 00 00 03 01 10 00 18 00 00 00 0F 00 00 00 FF FF FF FF FF FF FF FF 0C 00 00 00 02 01 10 00 60 00 00 00 11 00 00 00 FF FF FF FF FF FF FF FF 0D 00 00 00 14 00 14 00 03 00 00 00 00 00 00 00 09 00 00 00 04 00 00 00 FF FF FF FF 08 00 00 01 12 00 08 01 09 00 00 00 00 00 00 00 FF FF FF FF 08 00 00 10 FF FF FF FF 09 00 00 00 01 00 00 00 FF FF FF FF 08 00 00 05 02 01 00 00 03 01 10 00 18 00 00 00 15 00 00 00 FF FF FF FF FF FF FF FF 0D 00 00 00 03 01 10 00 18 00 00 00 17 00 00 00 FF FF FF FF FF FF FF FF 0B 00 00 00 01 01 10 00 18 00 00 00 17 00 00 00 FF FF FF FF 08 00 00 00 09 00 00 00
Got it. It wasnt status_bar_latest_event.xml is was just the status_bar.xml file
i thought that color was in the services.jar file... good to know
I think services.jar covers the clock, date, and pull down menu. But the xml files in the layout folder are for notifications.
Thx for the Hex info Ghost & the file name Explodee. I just edited my framework-res to get the white to display also like the OP was asking about and it worked like a charm
[Q] Technical: Bootloader is hidden on mmcblk0?
I hope this question is appropriate for this subforum, but before I void my warranty, I want to know *exactly* what is going on in my device so that I am prepared if something goes wrong. On my locked TF700 (via adb) I get this: Code: [email protected]:/ $ su [email protected]:/ # cat /proc/partitions major minor #blocks name 179 0 62087168 mmcblk0 179 1 786432 mmcblk0p1 179 2 438272 mmcblk0p2 179 3 2048 mmcblk0p3 179 4 835584 mmcblk0p4 179 5 5120 mmcblk0p5 179 6 512 mmcblk0p6 179 7 5120 mmcblk0p7 179 8 59976192 mmcblk0p8 8 0 31166976 sda 8 1 31162880 sda1 [email protected]:/ # hexdump -C /dev/block/mmcblk0 | head -3 00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 00380000 41 4e 44 52 4f 49 44 21 dc d0 3d 00 00 80 00 10 |ANDROID!..=.....| [email protected]:/ # I already know what the important partitions are, and that there are no visible partition entries for bootloader, recovery and kernel. But if I dump mmcblk0 directly, shouldn't I be able to see the code of the bootloader in the first few blocks? Where the BCT, PT and EBT partitions should be according to the NVFlash layout, I read only zeros. Can someone with unlocked bootloader, root and busybox installed please run the hexdump line from above and tell me if you get more than all zeros before offset 00380000?
My output: Code: [email protected]:/ # hexdump -C /dev/block/mmcblk0 | head -3 00000000 0b 72 0f 00 78 09 33 ef 99 6f 51 bf b0 6b 39 8c |.r..x.3..oQ..k9.| 00000010 4b e8 ff 0a 96 ce ce e1 34 8c 8a 89 0b b1 c3 6f |K.......4......o| 00000020 53 ec 76 61 ba 77 f1 af 61 eb 51 10 b6 96 bb 06 |S.va.w..a.Q.....| Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app
BossMafia2 said: My output Click to expand... Click to collapse Thanks! This proves that the unlocked bootloader "un-hides" the data at the beginning of the eMMC. However it looks encrypted, I expected a lot more zeros. Can someone else try the same command and check if you get the same or a completely different output? Alternatively, could maybe some developer explain to me what unlocking does in detail?
[email protected]:/ # hexdump -C /dev/block/mmcblk0 |head -3 00000000 8b 8d 9e 8f ff ff ff ff 00 01 00 00 a0 05 00 00 |................| 00000010 f3 43 fa 12 9c b6 e6 f2 07 ea 37 ad 9b c0 6d 3e |.C........7...m>| 00000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| above all is my output,I also have such a problem just like you ,my tablet is crappy and even the offical does not want to release the rom for us!and recently they updated system from 1.05 to 1.07,and it's very frustrating that they didn't correct any bugs but gave us 4.1.1 system ,and the power battery consuming problem is still exist since they updated system to 1.05!! I want to grab bootloader from device nand,but no solution till now! first of all ,you should know that my tablet is not asus tf700
my tablet's info. I have a rooted galaxy tab 3 7" device major minor #blocks name 179 0 15388672 mmcblk0 179 1 61440 mmcblk0p1 179 2 128 mmcblk0p2 179 3 256 mmcblk0p3 179 4 512 mmcblk0p4 179 5 2048 mmcblk0p5 179 6 512 mmcblk0p6 179 7 512 mmcblk0p7 179 8 12800 mmcblk0p8 179 9 8192 mmcblk0p9 179 10 13952 mmcblk0p10 179 11 3072 mmcblk0p11 179 12 3072 mmcblk0p12 179 13 10240 mmcblk0p13 179 14 10240 mmcblk0p14 179 15 10240 mmcblk0p15 179 16 7160 mmcblk0p16 179 17 3072 mmcblk0p17 179 18 8 mmcblk0p18 179 19 8192 mmcblk0p19 179 20 12288 mmcblk0p20 179 21 1740800 mmcblk0p21 179 22 512000 mmcblk0p22 179 23 16384 mmcblk0p23 179 24 20480 mmcblk0p24 179 25 12926959 mmcblk0p25 179 32 62367744 mmcblk1 179 33 62366720 mmcblk1p The command for hex dump with the head -3 wasn't eventful so here is the beginnings of my blk0: 00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 000001c0 00 00 ee 00 00 00 01 00 00 00 ff 9f d5 01 00 00 |................| 000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 45 46 49 20 50 41 52 54 00 00 01 00 5c 00 00 00 |EFI PART....\...| 00000210 d2 06 97 6c 00 00 00 00 01 00 00 00 00 00 00 00 |...l............| 00000220 ff 9f d5 01 00 00 00 00 22 00 00 00 00 00 00 00 |........".......| 00000230 de 9f d5 01 00 00 00 00 32 1b 10 98 e2 bb f2 4b |........2......K| 00000240 a0 6e 2b b3 3d 00 0c 20 02 00 00 00 00 00 00 00 |.n+.=.. ........| 00000250 80 00 00 00 80 00 00 00 51 a4 95 d5 00 00 00 00 |........Q.......| 00000260 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 00000400 a2 a0 d0 eb e5 b9 33 44 87 c0 68 b6 b7 26 99 c7 |......3D..h..&..| 00000410 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00000420 00 20 00 00 00 00 00 00 ff ff 01 00 00 00 00 00 |. ..............| 00000430 00 00 00 00 00 00 00 00 6d 00 6f 00 64 00 65 00 |........m.o.d.e.| 00000440 6d 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |m...............| 00000450 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| ... 07600000 41 4e 44 52 4f 49 44 21 88 ad 64 00 00 80 20 80 |ANDROID!..d... .| 07600010 5a 4a 2a 00 00 00 20 82 00 00 00 00 00 00 10 81 |ZJ*... .........| 07600020 00 01 20 80 00 08 00 00 00 00 00 00 00 00 00 00 |.. .............| 07600030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 07600040 63 6f 6e 73 6f 6c 65 3d 6e 75 6c 6c 20 61 6e 64 |console=null and| 07600050 72 6f 69 64 62 6f 6f 74 2e 68 61 72 64 77 61 72 |roidboot.hardwar| 07600060 65 3d 71 63 6f 6d 20 75 73 65 72 5f 64 65 62 75 |e=qcom user_debu| 07600070 67 3d 33 31 00 00 00 00 00 00 00 00 00 00 00 00 |g=31............| 07600080 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
mine also shows zeros, even though it's unlocked: [email protected]:/ # busybox hexdump -C /dev/block/mmcblk0 | head -3 00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 00380000 41 4e 44 52 4f 49 44 21 6c 68 38 00 00 80 00 10 |ANDROID!lh8.....| <><sharkcow><>