Database Info

Samsung P5110 and Internet key

Hi to all,
is possible to connect a internet key to Samsung Galaxy Tab2 P5110 ?
Thank you.

zmuda said:
Hi to all,
is possible to connect a internet key to Samsung Galaxy Tab2 P5110 ?
Thank you.
Click to expand...
Click to collapse
What do you mean by an "internet key" - a 3g/4g dongle? If so, no (or at least not trivially.)
You would have to obtain driver source for the device, build it for ARM and install it by hand to have any chance of making it work.

k1mu said:
What do you mean by an "internet key" - a 3g/4g dongle? If so, no (or at least not trivially.)
You would have to obtain driver source for the device, build it for ARM and install it by hand to have any chance of making it work.
Click to expand...
Click to collapse
You reply is very good.
The problem is the driver for internet key (3g/4g).
About your opinion, you can find drivers on the network?
Thank you , very kind.

zmuda said:
You reply is very good.
The problem is the driver for internet key (3g/4g).
About your opinion, you can find drivers on the network?
Thank you , very kind.
Click to expand...
Click to collapse
You'll have to use a device which is Linux compatible, then the driver would either be supplied by the manufacturer in source code form or is already included in the Linux kernel source. In either case, you would then install a kernel build environment, get the kernel source for your device, and enable that new driver. After that, build and install a kernel package. Unless you're a Unix person, this is not an easy task.
Oh, and the only way to connect it is via an OTG adapter.

I will upload KK-Booted stock kernel tommorow, with PPP Widget related modules to support USB internet dongle. You need CWM recovery but this boot image untested on P51xx since I have no access to it.

http://forum.xda-developers.com/showthread.php?p=37685672#post37685672

how to inject driver for your device without editing its boot.img

Hello everyone this guide will all tell you on how to inject any driver for your device espicially on those wit problems like wifi not working or may your touchscreen
App you need :
1. scriptmanager >>any version will do
2. a rooted device of course and a working brain of yours..
in notepad create the diver that is not working on you device
example: insmod system/vendor/modules/8188eu.ko
thats my Wifi driver then i run my criptmanager app then run it also click the run as root and the run at boot.
after doing so your wifi driver must be working by now..
Note that choose only the right driver for your device after doing so..
cosult mr.Goolge before injecting any driver :good:

gelo20ify said:
Hello everyone this guide will all tell you on how to inject any driver for your device espicially on those wit problems like wifi not working or may your touchscreen
App you need :
1. scriptmanager >>any version will do
2. a rooted device of course and a working brain of yours..
in notepad create the diver that is not working on you device
example: insmod system/vendor/modules/8188eu.ko
thats my Wifi driver then i run my criptmanager app then run it also click the run as root and the run at boot.
after doing so your wifi driver must be working by now..
Note that choose only the right driver for your device after doing so..
cosult mr.Goolge before injecting any driver :good:
Click to expand...
Click to collapse
This guide is hundred percent working and proven!!

DELETED

Not sure
Hello,
I`m kind of new, actually doing this for the first time. I do not want to flash another region`s firmware on my mob, but it might lead to certain issues like WiFi might break. My question is,
How do I know what drivers I need for my WiFi ??
Will it prompt after rooting (specifying this driver needed) or do I need to find that by some other method ??
I looked up Google typing Samsung S4 Mini WiFi driver, but could not find a single related result.

Newbie Need Help About Driver Compile... :'(

Hi Everyone;
I have bought a new usb-rj45 adapter for my Samsung Galaxy Tab2 P5110 Only Wifi tablet... (its rooted and busybox pro installed on it)
After i bought, i put it in tablet via its original USB Otg Cable the i do "lsusb" in the terminal emulator but i cant see anything new in its output...
When i searched usb-rj45 adapte cd and i see linux driver there but the are three files named;
***.c
***.h
Makefile
When i search internet a little bit and i understand that i need to compile drivers with these files to make .ko file as driver...
I bought and installed c4droid and its GCC and SDL Plugin when i try compile it but i get an error that it screenshot is attached to this message... (On the other hand may be i can do this compile for tablet on my pc after i installed Android SDK but i dont know how can i do it unfortunately...)
So please help me how can i use this usb-rj45 adapter on my tablet...
Thanks so much who help me...
Best regards...

[REQ] USB ext WIFI Dongles driver modules into 4.3/4.4 kernel

Hi! I was wondering if it was possible (it probably is) to merge ralink drivers into some i9300 kernel to make an eventual USB external Wifi adapter. More in detail, the modules i think would be mostly useful are the RT2080 ones, even i need specifically the rt3070 one. I saw that this was already done on Nexus7 devices, and wanted to ask if some dev could do this or some tips on how to do it by myself. Thank you
Sent from my GT-I9300 using xda app-developers app

nebular said:
Hi! I was wondering if it was possible (it probably is) to merge ralink drivers into some i9300 kernel to make an eventual USB external Wifi adapter. More in detail, the modules i think would be mostly useful are the RT2080 ones, even i need specifically the rt3070 one. I saw that this was already done on Nexus7 devices, and wanted to ask if some dev could do this or some tips on how to do it by myself. Thank you
EDIT 22/03
So i found out the xda-dev app Module Loader. Injected rt3070sta.ko module and successfully mounted my Zyxel NWD2105 Wifi dongle. But it seems phone doesnt care. I m on Slimkat 4.4 v3.8 on i9300. The question is: how do i now become able to use the dongle?
Click to expand...
Click to collapse

nebular said:
nebular said:
Hi! I was wondering if it was possible (it probably is) to merge ralink drivers into some i9300 kernel to make an eventual USB external Wifi adapter. More in detail, the modules i think would be mostly useful are the RT2080 ones, even i need specifically the rt3070 one. I saw that this was already done on Nexus7 devices, and wanted to ask if some dev could do this or some tips on how to do it by myself. Thank you
EDIT 22/03
So i found out the xda-dev app Module Loader. Injected rt3070sta.ko module and successfully mounted my Zyxel NWD2105 Wifi dongle. But it seems phone doesnt care. I m on Slimkat 4.4 v3.8 on i9300. The question is: how do i now become able to use the dongle?
Click to expand...
Click to collapse
You must boot from a linux distrubiton such as backtrack. But there is no native way that i know for doing that. Although there is one solution that you run linux background and connect to it by vnc viewer. Take a look at this
Click to expand...
Click to collapse

I built a few kernels for 4.3 and 4.4 with these modules, but the problem is once I built the kernel I lost the ability to mount the ext4 SD to be available within android. Only adb can see it.
What do you see in lsusb, or dmesg when you plug it in?

simply nothing. my rt3070 device is not even recognized by phone (i9300 with 4.4.4 Slimkat) after inserting specific .ko modules

[Q] USB OTG and UsbManager

I was trying to communicate with my Arduino Uno by means of the USB Host API. The problem is, that the UsbManager always returns an empty list of devices. I tried this with multiple ROMs:
ViperS 5.1
ViperS 5.2.1
CyanogenMod 11 by Sultanxda
CarbonRom
With ViperS I find the Arduino ( or any other USB devics ) using lsusb.
With the other roms I don't find the Arduino.
Does anybody know what is the missing puzzle piece to get the UsbHost API find my devices?
If no, is there a way to get a USB tty to use it with the arduino (with root) ?
Or does anybody know a ROM where it works?

ViperS
Ok, for now I found out that the cdc-acm driver is used for cummunicating with the arduino. Fortunately this driver is included as module in SebastianFM's kernel, used by ViperS roms.
I just ran
Code:
insmod /system/lib/modules/cdc-acm.ko
and i got /dev/ttyACM0
That means that I am able now to communicate by using root.
That's good for now, but does anybody know how to do it without root?

mtz92 said:
Ok, for now I found out that the cdc-acm driver is used for cummunicating with the arduino. Fortunately this driver is included as module in SebastianFM's kernel, used by ViperS roms.
I just ran
Code:
insmod /system/lib/modules/cdc-acm.ko
and i got /dev/ttyACM0
That means that I am able now to communicate by using root.
That's good for now, but does anybody know how to do it without root?
Click to expand...
Click to collapse
i'm searching for the same think comunicating with arduino uno board, i will try the command now thanks... , if someone know more about Sensation and arduino please help