Database Info

[HOW TO] Root Nextbook8 Premium (and install market app) [UPDATED 1-17-12]

PLEASE BE ADVISED: THE AUTHOR OF THIS POST NO LONGER PROVIDES SUPPORT FOR THIS THREAD. HOWEVER YOU ARE MORE THAN WELCOMED TO CONTINUE USING THE FILES AND METHODS AT YOUR OWN DISCRETION. GOOD LUCK!!
INTRO: For all those searching the internet trying to find answers as to how to gain root on your Nextbook8 Premium and also gain access to the wonderful android market from which we were greatly deprived (as is the case with many low-priced tablets these days), the wait is over thanks to a certain someone who goes by the name of DEVMONKEY. Of course I take absolutely NO CREDIT for this and only took the liberty to re-write it thus adding a little more detail to the process. Enjoy!!!
DISCLAIMER​***I HAVE NOT TESTED THIS PARTICULAR ROM WITH MY N8 WHEN I HAD IT BUT AS THE PROCEDURE TO FLASH IS STILL THE SAME ALL SHOULD GO WELL. HOWEVER, I AM NOT RESPONSIBLE FOR WHAT MAY OR MAY NOT HAPPEN IF YOU USE THIS AND DAMAGE YOUR DEVICE. PLEASE FOLLOW ALL STEPS CAREFULLY***​
[HOW TO] Root and install Market on your Nextbook8 Premium​
UPDATE: This is post has been updated with a new rom to replace old one. Method of flashing is still the same so no worries. All those who want to upgrade to this rom from the one I previously posted in this guide when I first wrote it can just repeat the steps over again with the new rom package.​
This rom is based on Samhain's release: SamDroid v1.13
Modifications (mostly GUI / cosmetic tweaks):
1.) cifs.ko / slow-work.ko / nls_utf8.ko are in /system/lib/modules and can be loaded using Mount Manager app from the market. This will let you mount CIFS/SMB shares to the device.
2.) Honeycomb-like launcher and updated GUI icons. (you can change it to any Launcher you want)
A couple of things to note once you have installed the rom:
- It starts up in Italian, so open Android settings "Impostazioni" and go to the "Lingua e tastiera" setting, and change the "Seleziona lingua" to your preffered language.
- I've put a few wallpapers in /system/media that you can set full screen by going into Live Wallpapers and using the "Multipicture Live Wallpaper" set them to the screen.
- There are a few things (widgets) on the homescreen that don't work after initial boot, just remove them and add back whatever you want to the homescreen.
- Sleep of death issues seem to be fixed, and the camera works (Camera app works, but Skype and Fring don't work yet...).
- You can also grab Adobe Flash 11 from the market and it'll work correctly.
- This release boots MUCH faster, and is even more responsive than before.
- There is a cell standby issue that drains the battery more in theory so if you feel like that is happening with you just delete the Phone.apk and TelephonyProvider.apk from /system/app. You can use ADB or you can use Root Explorer to do so. You will likely have to force a reboot because you'll start getting repetitive force closes once you do so, but it won't hurt anything. Once you reboot, all is well.
VERY IMPORTANT: After installing custom roms that also flash a custom recovery your N8 may reboot into the custom recovery. If this happens hit reboot system and only reboot system.
​Download new rom from HERE and extract (using winRAR preferably) to your desktop or anywhere you choose. Location doesn't really matter for this guide to work.
NOTE: If you have anything you care about (like apps, notes etc.) on your N8 make sure you back it up now.
Step 1: Turn your N8 off.
Step 2: Press both Volume buttons down and plug the USB cord into the N8.
NOTE: On your screen you should see a bubble pop up in the lower-right corner saying "Installing drivers". Most likely it will say it can't find the drivers. This is normal. Continue following the steps to install the missing drivers.
Step 3: Open the Device manager by typing mmc devmgmt.msc into your "Run" box on XP or search box in start menu on Windows 7 and hitting enter (you can also find Device Manager in your Control Panel options in Windows 7).
Step 4: With your N8 still in an off state and plugged in via USB you should see a yellow exclamation symbol somewhere next to "Unknown Device" in the list of devices in the Device Manager. Right click on it and select "Update driver software".
Step 5: Now it will prompt you to choose how you want to search for it. Select "Browse my computer for driver software" and it will bring up a window for you to navigate manually to the driver location which is in the "drivers" sub-folder in the NEXTBOOK8ROOT folder. Select which ever system you have (32bit or 64bit) and then hit "OK". You might go thru one or two prompts before it actually installs. Just "OK" everything and you should be fine.
Step 6: Once the drivers are installed you are ready to flash. Go into the root of the NEXTBOOK8ROOT folder and select RK29update.exe (right-click for Win7 users and Run as Admin).
Step 7: Now you should be at the interface of the program and at the bottom in bold words it should say "FOUND RKAndroid rock usb" (if it doesn't then it mean the drivers probably weren't installed correctly). This part is VERY IMPORTANT!! Make sure all of the boxes on the left are checked (should look like the pic below). The one at top is the one usually missing a check and would need to be checked by you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 8: Once all boxes on the left are checked you are going to click on "EraseIDB" at the bottom and let it complete. Once that finishes click on "Run" and you will see a series of commands running in the right window pane (see pics below). Give it some time as it will probably take a few minutes. When it's done it should look like the second pic below.
Once the process is finished your NEXTBOOK should reboot into the recovery and reflash the OS. Congratulations!!! You now have an affordable rooted tablet with access to the Android Market!!
OTHER ROMS YOU CAN FLASH INSTEAD OF THE ONE IN THE ABOVE GUIDE:
Pisteone - [SDK 2.1] EXT4 Bluetooth 3G Root [Basic FW 1.0.21] ICS Style - LINK
Fintadroid - [FULL ROOT & EXT4] [BT & 3G] [FW.1.0.21 PRESTIGE] - LINK
ALL ROMS FOR NEXTBOOK8 - LINK (Be very careful and read before you flash)

Thanks! worked great.

I signed up, so i can say thank you. this worked perfectly.. i was skeptical and scared i'd ruin this tablet, as i got it as a gift, and was obviously disappointed to see no market on it, but this worked. thank you.

How about Nextbook Premium 7?

Thank you!
This worked great, I was able to get the android market installed and working.

Android version?
What version of Android does this install?
Cheers, Greg.

It's work, your are wonderful,thank you Sunnyboy167

Great job! Good to have root and Market working. But anyone else get FC when opening Camera app?

Perfect! I have rooted many Android devices and this is one of the easiest ones. Just read the directions carefully and you'll do fine.
Hopefully someone will release an ICS update for this device soon..after using my Galaxy Nexus, Gingerbread seems so...obsolete.

I'm glad you enjoyed this info just as much as i did
To everyone YOU ARE WELCOME but please....the best way to thank me is by hitting the thank button at the bottom right of my post. Thanks!
@xxProphecyxx - here is a link for the nextbook7 http://gunnersbarn.wordpress.com/2011/11/04/how-to-install-android-market-to-nextbook-premium-7/ I don't see any root method listed on the site but im sure there is one out there if you want to root it too. Or you can even take a chance if youre brave and use a one click root based on the android version you have.
@ghi07 - All this method does is re-install the OS (which is Gingerbread to answer your question) with market and superuser.
@dalerious - I'm sorry but I don't have a Nextbook anymore but if I did I would definitely try my best to help you. Try doing the entire process over and see if that works. Good luck!

THANK YOU!!!!
I was about to throw this tablet out the window!!! Followed the instructions and it works perfectly!!!! Thanks SO SO much!!!

Thanks to you I had a very Merry Christmas haha thank button has been pushed repeatedly!

Hi Sunnyboy,
Just want to say a big thank you for the detail post. I was about to give up on on this tablet when I came across your post.
Chris

help help!!!
hi sunny boy,
i just got my nextbook8 yesterday... come across this website and trying to root my nextbook last night at home...
I encounter this problem...when i plug in my nextbook into the PC USB ..it turn on from the off mode. and the pc started to scan the driver and it actually install successfully. I am running on win7. after that i cant install the driver required.. can anyone help me out here cos i try to run exe. file. it cant root my nextbook... i am helpless now...

I am also having problem with the camera. I'll have this error:
The application Camera (process com.android.camera) has stopped unexpectedly. Please try again.

HELP HELP HELP...not able to on the device after updated the driver....PC shows device found after plug in USB, which shows the device is working but just cannot on it.. a total IT dummy and not sure what's going on..someone said the ROM is damaged which cause this.....any way to recover the tablet..i just bought it for less than a week. HELP HELP HELP!!!!!! (tried reset but still no response)

Sunnyboy167 said:
To everyone YOU ARE WELCOME but please....the best way to thank me is by hitting the thank button at the bottom right of my post. Thanks!
@xxProphecyxx - here is a link for the nextbook7 http://gunnersbarn.wordpress.com/2011/11/04/how-to-install-android-market-to-nextbook-premium-7/ I don't see any root method listed on the site but im sure there is one out there if you want to root it too. Or you can even take a chance if youre brave and use a one click root based on the android version you have.
@ghi07 - All this method does is re-install the OS (which is Gingerbread to answer your question) with market and superuser.
@dalerious - I'm sorry but I don't have a Nextbook anymore but if I did I would definitely try my best to help you. Try doing the entire process over and see if that works. Good luck!
Click to expand...
Click to collapse
I have already been to this website and successfully added the market to my Next7. I do want to root it and flash a custom ROM, but I have not found anything useful. Thanks though.

Rooted fine, thx a mil. Installed GOLAUNCHER EX and the icons were too big. Dl'd LCD resolution from market and decreased res from 160 to 140. To apply changes app reboots tablet. When it came back up, nextbook stuck on launch screen and I can't even turn it off!! This was my gf's xmas present from her parents!!! Any suggestions??

eybarra2 said:
Rooted fine, thx a mil. Installed GOLAUNCHER EX and the icons were too big. Dl'd LCD resolution from market and decreased res from 160 to 140. To apply changes app reboots tablet. When it came back up, nextbook stuck on launch screen and I can't even turn it off!! This was my gf's xmas present from her parents!!! Any suggestions??
Click to expand...
Click to collapse
u can reboot the device by using a paperclip and press in the reset button.
---------- Post added at 10:44 AM ---------- Previous post was at 10:39 AM ----------
Thanks for the detailed guide Sunnyboy167~ Anyway devmonkey just release a newer mod which works better than the previous. Do check it out

hi all,
I rooted my new nextbook8 ...and it works just nice...
just need some help on whether possible to use my iphone as a modem for my nextbook? as i realized it cant detect my wifi network from my iphone. While my colleague 's motorola zoom works fine with my iphone...any solution on this?
Caduser from singapore...

[GUIDE]Yuntab P500 (M5000) Rooting Guide and ROM

NOTE: The rooting method may have the potential to BRICK the phone and will void your warranty, so do it at your own RISK. I am not responsible for any problems caused by this guide..
I recently bought a Yuntab P500 PDA Smartphone 5 inch Screen Android. Here are its main features:
CPU: Qualcomm MSM7227a 1.0GHz / Adreno 200 GPU.
Display: 5.0 inch Mulititouch screen, 800 x 480px.
OS: Android 4.0 Ice Cream Sandwich.
Memory: 512MB RAM 8GB ROM.
Camera: Dual Cameras Back: 5MP, Front: 0.3MP.
Bluetooth 2.1 +EDR, Bluetooth stereo (A2DP).
I am very pleased with the phone but still wanted to root it. However, I found it is very hard to root the phone because there is lacking of information of it on the Internet.
Its driver files are included on the phone internal rom with a folder called 'android4.0_usb_driver_32bit'. Once you connect the phone with USB Debugging enabled, you will see a new CD drive, double click it and copy the whole folder to your computer.
However, Its driver is not working on my Windows 7 64 bit laptop, so I had to try my XP one and it took a while to install all drivers. Then I followed this instruction to try Root_with_Restore_by_Bin4ry, I got the message to say the phone was rooted but it was not working at all.
Luckily, I found Karbonn A15 is similar to Yuntab P500, so followed ntstatic's instruction to have another try.
I followed the following steps to use Android Root Unlock, DON'T try anything else including A15 driver, it may BRICK your phone!
1. Enable USB Debugging - Under SETTINGS - DEVELOPER OPTIONS
2. Install the drivers for the phone - copy drivers from your phone internal card.
3. download "Android Root Unlock" from sourceforge.net and extract it to a folder on your harddisk
4. navigate to the above folder and run the batch file ICS_Root_Unlocker.bat
the batch file will reboot your phone a couple of times and will wait with a message "Press Any Key to continue"
IMP NOTE : if you pc is saying "PRESS ANY KEY" note if your phone is on or rebooting....
if it is Rebooting, wait for it to start before pressing a key
5. After a couple of boots the phone will be rooted
6. verify that the Root is complete by observing a "Superuser" shortcut in the application list
Thanks for that guide, now my phone has been rooted successfully.
I hope this will help people like me. Good luck.
I got the ROM from a Chinese guy. I haven't tried them yet, so flash them at your OWN RISK as well.
OTA Zip format: P500W-ota-1.0.623_20120908.zip
BIN format and the updating tool: P500W_1.0.623_20120908_SHIP & Porter

In Response...
freegoat said:
NOTE: The rooting method may have the potential to BRICK the phone and will void your warranty, so do it at your own RISK. I am not responsible for any problems caused by this guide..
I recently bought a Yuntab P500 PDA Smartphone 5 inch Screen Android. Here are its main features:
CPU: Qualcomm MSM7227a 1.0GHz / Adreno 200 GPU.
Display: 5.0 inch Mulititouch screen, 800 x 480px.
OS: Android 4.0 Ice Cream Sandwich.
Memory: 512MB RAM 8GB ROM.
Camera: Dual Cameras Back: 5MP, Front: 0.3MP.
Bluetooth 2.1 +EDR, Bluetooth stereo (A2DP).
I am very pleased with the phone but still wanted to root it. However, I found it is very hard to root the phone because there is lacking of information of it on the Internet.
Its driver files are included on the phone internal rom with a folder called 'android4.0_usb_driver_32bit'. Once you connect the phone with USB Debugging enabled, you will see a new CD drive, double click it and copy the whole folder to your computer.
However, Its driver is not working on my Windows 7 64 bit laptop, so I had to try my XP one and it took a while to install all drivers. Then I followed this instruction to try Root_with_Restore_by_Bin4ry, I got the message to say the phone was rooted but it was not working at all.
Luckily, I found Karbonn A15 is similar to Yuntab P500, so followed ntstatic's instruction to have another try.
I followed the following steps to use Android Root Unlock, DON'T try anything else including A15 driver, it may BRICK your phone!
1. Enable USB Debugging - Under SETTINGS - DEVELOPER OPTIONS
2. Install the drivers for the phone - copy drivers from your phone internal card.
3. download "Android Root Unlock" from sourceforge.net and extract it to a folder on your harddisk
4. navigate to the above folder and run the batch file ICS_Root_Unlocker.bat
the batch file will reboot your phone a couple of times and will wait with a message "Press Any Key to continue"
IMP NOTE : if you pc is saying "PRESS ANY KEY" note if your phone is on or rebooting....
if it is Rebooting, wait for it to start before pressing a key
5. After a couple of boots the phone will be rooted
6. verify that the Root is complete by observing a "Superuser" shortcut in the application list
Thanks for that guide, now my phone has been rooted successfully.
I hope this will help people like me. Good luck.
Does anybody know where to obtain the ROM of the phone? Thanks in advance.
Click to expand...
Click to collapse
Thank you for all the work you've put into this project. Unfortunately for me, I am unable to root my Yuntab aka Cobalt SP500. When running the batch file, I received the following: failed, failed, failed after every Press Any Key to Continue message. Now, I am using Windows 7 under the 64-bit architecture. Is this possibly the reason?

dcsoul said:
Thank you for all the work you've put into this project. Unfortunately for me, I am unable to root my Yuntab aka Cobalt SP500. When running the batch file, I received the following: failed, failed, failed after every Press Any Key to Continue message. Now, I am using Windows 7 under the 64-bit architecture. Is this possibly the reason?
Click to expand...
Click to collapse
Yes, to root Yuntab P500, you will have to use XP 32-bit.

have a p500, has dated rom post published here, such as making backup?
thanks

have yuntab p500 usb otg?

thanks for this, sadly this method doesn't works from me.
searching I found a alternative, I tell about a site that posted a solution that I tested on my p500 and worked:
http://isytec.net/manual-video-root-yuntab-p500/
the bad thing is that the root program that it puts appears to be chinesse.... the right button is "OK" and from program can configure if allows or deny (all in chinesse) but works well
regards

hi,
has anybody successfully installed one of the firmwares from post # 1 ? thanks.

Yuntab p500
pogodancer said:
hi,
has anybody successfully installed one of the firmwares from post # 1 ? thanks.
Click to expand...
Click to collapse
HERE IS THE LATEST ROM FOR YUNTAB. I HAVE NEVA TRY IT COS I DONT HAVE ONE WITH ME.
YOU CAN DOWNLOAD IT FROM THE SITE BELOW. IT IS A JELLY BEAN 4.2
http://www.needrom.com/mobile/yuntab-p500/

muammil said:
HERE IS THE LATEST ROM FOR YUNTAB. I HAVE NEVA TRY IT COS I DONT HAVE ONE WITH ME.
YOU CAN DOWNLOAD IT FROM THE SITE BELOW. IT IS A JELLY BEAN 4.2
http://www.needrom.com/mobile/yuntab-p500/
Click to expand...
Click to collapse
Thanks but this is the same rom as linked in post 1. It is Android 4.0.4 ICS.
Another question: How can I install the Google Playstore on the phone. Playstore app is not installed in stockrom. Thanks.

ROOT & Playstore
Hi,
I have to add that I bought the Yuntab P500 on AliExpress for 70 USD. This is definetly the best low budget smartphone I ever had. The build quality is not like a Samsung's but it's OK. It has a big 5 inch screen :good: with a small viewing angle . It runs not bad with the 1 GHz single-core-CPU and 512 MB RAM . It has 8 GB ROM and the fast WCDMA :good:. The battery seems to be very good :victory:. I think it is not easy to find a device which is similar good for this price.
But unfortunately the Android 4.0.4 ICS system is not rooted and does not have Google Playstore installed .
Solution:
======
1. ROOT:
On the phone storage or in the firmware downloads (see the links in this thread) you find the Windows drivers in the folder "android4.0_usb_driver_32bit". These drivers work excellent on my Windows 7 32bit computer. Connecting the P500 with drivers installed it gives me 3 entries in the device manager (Android phone + Qualcomm COM-port + Qualcomm modem):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For rooting the P500 I tried the above mentioned "ICS Root Unlocker 1.0" and "RomasterSetup_3_2_8". But there was no success. But after that I was successfully rooting with "Root_with_Restore_by_Bin4ry_v31" from here: http://forum.xda-developers.com/showthread.php?t=1886460
2. GOOGLE PLAYSTORE:
As the "GoogleServicesFramework.apk" is already installed on the P500, I only downloaded a "MarketUpdater.apk" and a "Vending.apk" from the web. I put my "RootExplorer.apk" and the "MarketUpdater.apk" + "Vending.apk" to the internal storage. After installing RootExplorer I copied "MarketUpdater.apk" + "Vending.apk" into system/app and gave the same attributes to them just like the other apps have. After that I installed the "Vending.apk" and rebootet the P500. Playstore is working fine now - there was not any app that I could not find.
Have fun with this nice phone !
Summary to the P500: I you can root and install the playstore or if you have somebody to do this for you, this phone is a great deal for 70 USD. Earlier I had a 4-inch-phone with a Spreadtrum SC6820 SOC without WCDMA and a faked Android 4 for 50 USD, which was a bad Android phone. After that I had an 4-inch MTK6572 device without WCDMA and only 256RAM/512ROM and Android 4.2 for 60 USD which was better but to weak with RAM and ROM. And now I have the P500 for 70 USD. Here everything sticks together very fine to be a good smartphone which is worth each cent. So if you want a cheap phone and you see the P500 for this price, don't hesitate to buy.

freegoat said:
Luckily, I found Karbonn A15 is similar to Yuntab P500, so followed ntstatic's instruction to have another try.
I followed the following steps to use Android Root Unlock, DON'T try anything else including A15 driver, it may BRICK your phone!
[...]
BIN format and the updating tool: P500W_1.0.623_20120908_SHIP & Porter
Click to expand...
Click to collapse
I recently got my YunTab P500, but the primary camera is not working. When starting any Camera-App I always get the commonly known "Can't connect to Camera"-Error. I think I tried nearly every solution one could imagine:
- do ota-update
- do bin update
- empty camera cache
- install alternate camera applications
- factory reset
- empty cache via factory recovery
- set permissions for the camera-app
- use JB-Camera and change cameras (though this worked: after restarting the camera app, I got the video-phone-camera)
So far nothing worked for me. I think the most simple solution would be, to send in the mobile and get my money back. Sadly the seller doesn't answer my support requests - I think he's gone.
I think asking here is my last chance to find someone to help me. Estimating this is no hardware-bug I think theres only one solution:
The installed kernel doesn't come with the proper instructions for the camera. This would be a proper explanation, if the Bin-Update doesn't come with the kernel image (which I dont know).
You, freegoat, mention not to use anything from a15/W719 roms. Did you try that or is it only a general suggestion? If you tried: What was the result? Because in the a15-Thread they've got boot.img (which as far as I know usually includes the kernel)...
Thank you for your help,
Boredland

pogodancer said:
Hi,
I have to add that I bought the Yuntab P500 on AliExpress for 70 USD. This is definetly the best low budget smartphone I ever had. The build quality is not like a Samsung's but it's OK. It has a big 5 inch screen :good: with a small viewing angle . It runs not bad with the 1 GHz single-core-CPU and 512 MB RAM . It has 8 GB ROM and the fast WCDMA :good:. The battery seems to be very good :victory:. I think it is not easy to find a device which is similar good for this price.
But unfortunately the Android 4.0.4 ICS system is not rooted and does not have Google Playstore installed .
Solution:
======
1. ROOT:
On the phone storage or in the firmware downloads (see the links in this thread) you find the Windows drivers in the folder "android4.0_usb_driver_32bit". These drivers work excellent on my Windows 7 32bit computer. Connecting the P500 with drivers installed it gives me 3 entries in the device manager (Android phone + Qualcomm COM-port + Qualcomm modem):
For rooting the P500 I tried the above mentioned "ICS Root Unlocker 1.0" and "RomasterSetup_3_2_8". But there was no success. But after that I was successfully rooting with "Root_with_Restore_by_Bin4ry_v31" from here: http://forum.xda-developers.com/showthread.php?t=1886460
2. GOOGLE PLAYSTORE:
As the "GoogleServicesFramework.apk" is already installed on the P500, I only downloaded a "MarketUpdater.apk" and a "Vending.apk" from the web. I put my "RootExplorer.apk" and the "MarketUpdater.apk" + "Vending.apk" to the internal storage. After installing RootExplorer I copied "MarketUpdater.apk" + "Vending.apk" into system/app and gave the same attributes to them just like the other apps have. After that I installed the "Vending.apk" and rebootet the P500. Playstore is working fine now - there was not any app that I could not find.
Have fun with this nice phone !
Summary to the P500: I you can root and install the playstore or if you have somebody to do this for you, this phone is a great deal for 70 USD. Earlier I had a 4-inch-phone with a Spreadtrum SC6820 SOC without WCDMA and a faked Android 4 for 50 USD, which was a bad Android phone. After that I had an 4-inch MTK6572 device without WCDMA and only 256RAM/512ROM and Android 4.2 for 60 USD which was better but to weak with RAM and ROM. And now I have the P500 for 70 USD. Here everything sticks together very fine to be a good smartphone which is worth each cent. So if you want a cheap phone and you see the P500 for this price, don't hesitate to buy.
Click to expand...
Click to collapse
i was able to port the google play but how can i port CWM on the phone. is there any windows app or tool i can use to make my own CWM?
THANKS

@ muammil
Sorry but I don't have a working CWRM. If you are successfully it would be nice to post your solution. Thanks.
Sent from my Q6000 / Jelly Bean 4.2.1 using Tapatalk 4

Porting playstore on yuntab p500
pogodancer said:
@ muammil
Sorry but I don't have a working CWRM. If you are successfully it would be nice to post your solution. Thanks.
Sent from my Q6000 / Jelly Bean 4.2.1 using Tapatalk 4
Click to expand...
Click to collapse
AFTER I SUCESSFULLY ROOTED MY PHONE. I DOWNLOADED THE BELOW APPS
---------GOOGLE SERVICE.APK,
------------------------------------------------GOOGLEPLAY 4.1.10.APK
------------------------------------------------------------------------------------------LINK2SD.APK
-I FIRST INSTALL LINK2SD AND REBOOT THE PHONE
--I NOW INSTALL GOOGLE SERVICE AND LASTLY INSTALL GOOGLEPLAY.
---I OPEN LINK2SD
----SCROLL DOWN TO GOOGLE PLAYSTORE AND CLICK ON IT
-----TOUCH THE ACTION BUTTON AND SELECT CONVERT TO SYSTEM APP
------WAIT FOR IT TO FINISH THEN REBOOT AND ENJOY
IF IT HELP THEN THUMPS UP:good:

I thought you could post your success when you find a clockwork recovery. I wrote already how to install the playstore.
Sent from my Q6000 / Jelly Bean 4.2.1 using Tapatalk 4

^pogodancer
FOR THE CWM I HAVE NO IDEA WHERE TO START THATS Y I ASKED U IF THERE IS A TOOL. BUT WILL KEEP SEARCHING & IF SUCESSFULL I WILL POST IT HERE.
THANKS
---------- Post added at 09:09 AM ---------- Previous post was at 08:38 AM ----------
IM NOT A PROGRAMMER NOR DO I KNOW HOW TO USE LINUX CODE. BUT IF ANY1 CAN GUIDE ME I WILL APPRECIATE.
DOING MY RESEARCH I COME ACROSS THISWHICH IS A GUIDE ON HOW TO MAKE A CUSTOM RECOVERY FOR ANY DEVICE. BUT THE PROBLEM I HAVE HERE IS IM NOT A PROGRAMMER. CAN ANY1 HELP OUT. I CAN PROVIDE HIM WITH ALL THE PHONE IMAGE FILES HE NEEDS.
CHEERS

[HOWTO][ROOT] POV Protab 3XXL: upgrading, rooting & saving battery guide

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So I recently bought a Protab 3XXL from vendor Point of View, and I noticed there wasn't much information to find on the internet for this tablet. So I had to figure out by myself how to get things done, and as an android beginner, that wasn't very easy. That's why I wanna create this guide for all you people who bought the same tablet and want to do the following things with it:
1. Upgrade to new firmware release
2. Root the tablet so you can uninstall bloatware and install some advanced apps
3. Save battery, make the tablet go faster and smoother.
This guide will probably work on other RK3066 devices as well. I'm in no way responsible if you brick your device by not following every exact step!
1. Upgrade the tablet to new firmware release
When I initially bought the tablet, the firmware that was installed was buggy as hell, so the first thing I did was install the new updated firmware from the Point of View download site. This made my tablet go a bit faster and save a bit more battery life. The manual on the site though doesn't give a great explanation on how to install new firmware. Here's how to do it easily:
Beware: upgrading your tablet will result in loosing all your data! Make sure you took backups before continuing! Also, make sure you got over 50% of battery life so the tablet doesn't die in the middle of the upgrading process.
Go to http://ow.ly/lSuza and download the latest firmware release (get the one with the latest date in the filename, do not install v1.1 as wifi doesn't work on that one, don't know why) and extract it.
For upgrading your tablet to a new release, you need your tablet to boot into flash mode. This is done by switching off your tablet, wait a few seconds, press the VOLUME UP button and (while still pressing that button) connecting your tablet to your pc. Windows will tell you it failed to install the drivers as none were found, that's because you have to manually point windows where to find the drivers. To install the drivers, follow the steps written in the manual (page 2-6) found on the same site as the firmware update.
Open up rkbatchtool.exe which is in the extracted folder from step 1. If all went well, you should see a green rectangle which means your tablet is correctly connected in flash mode. If this rectangle is pink or no color at all, connect your tablet again holding the volume up button.
Once you got the green light on rkbatchtool.exe, you're good to go and you can follow the steps written in the manual!
I tested this procedure on Windows 7, but I guess it should be about the same on any other Windows version. Just use the appropriate drivers as described in the manual That should be about it, if you have any further questions, feel free to ask!
2. Rooting the tablet
Rooting the tablet is even easier than upgrading it! Here's how to do it:
Go to www.moborobo.com. Download and install moborobo as this app will automatically search for the right drivers (other ones than the ones used to upgrade the device) when you connnect your tablet to your pc.
Make sure you got USB debugging enabled on your tablet (settings -> developers options -> usb debugging)
Open up Moborobo, connect your tablet the normal way (so without pushing the volume button) and let moborobo do the rest. If Moborobo doesn't do anything when connecting the device, click on 'refresh devices'. Installing the drivers may take a long time so be patiently (it took about 15 minutes on my laptop).
When the correct drivers are installed, download the tool to root your device from here: http://ow.ly/lSZtT
Don't worry, it's malware free and safe
Extract the zip and fire up SuperOneClick.exe.
Click on 'root'. Everytime a dialog comes up, press 'yes' or 'ok' a few times untill it says your device is rooted.
Disconnect your tablet and check if superuser is installed, that's it
3. Some battery advice
All Android tablets last about a day and have to be plugged in by the evening, and the Protab is no exception for that! These are some tips to make your battery last longer (most tips are for rooted devices, so make sure you root your tablet first!)
Greenify is a great app to save some battery. Watch what it does and how to use it over here: http://www.youtube.com/watch?v=fW81YJME69U. This saved my battery a lot!Download it in the playstore!
Android tablets still have some leftovers from their sibling phones, and that's causing TONS of battery drain. To get rid of the phone functions and a better explanation head over to this guide (very easy to follow): http://ow.ly/lT0ZV
There are a bunch of better home screen launchers out there which are less battery-consuming than the stock android launcher (which the Protab has). My advice is Smart Launcher (or the pro version). This launcher is really smooth, fast and has a clean minimalistic look! Get it at the Playstore: http://ow.ly/lT1yX
Rom Toolbox by jrummy is a great app to execute some root tasks like uninstalling bloatware (software installed by Point of View like their useless keyboard). Head over to the Playstore to download it! Beware of what you're uninstalling, if you uninstall core android apps, it could mess up your system! If this happened, flash your device again as explained in the beginning of this thread.
I use my tablet a lot for reading pdf-files for school. As most pdf-readers have a white background, this drains a lot of battery (the lighter the colors on your screen, the more battery it drains). Moon Reader has an option to read pdf's in night mode (turns the background dark and the words white). This saves a lot of battery and is way easier to read! Head over to the playstore to download it.
As I already said in my previous tip: white colors drain a lot of battery. Therefore, use a dark wallpaper on your home screen!
Always use the lightest apps possible for a task. For example: Chrome browser for Android is a very heavy app which can be perfectly substituted by Boat Browser Mini (a lightweight browser that works blazingly fast). Try and google 'lightweight ........... for android' to see what the best alternatives for a heavy app are!
If someone has other tips for conserving some battery life, be sure to write it in the comments, I'll include it in this list!
If anyone has a better way of solving things or has anything to add to this guide, feel free to let me know

some custom rom fot this tablet POV Protab 3XXL?

costyprj said:
some custom rom fot this tablet POV Protab 3XXL?
Click to expand...
Click to collapse
Searched everywhere, but couldn't find any specifically for this tablet. I found a site which stocks many custom roms for the same chip this tablet has (Rockchip RK3066), didn't test any though so I really don't know if they would work:
Code:
http://www.rockchipfirmware.com/firmware-downloads
If there would be enough demand, I could try and make one myself

Hello,
my mother owns a ProTab 3 XXL. Since yesterday the tablet is not starting any more. I tried the reset button and several combinations with the front buttons.
i also checked the voltages:
- charger: 5,2V
- battery when charger disconnected: 4,3V
- battery when charger connected: 4,3V
is there something wrong? How can i fix the tablet?
thank you very much,
machinE

Hi,
I need backup/dump for protab 3 xxl, v1.1 (I think any v1.x will do). It has cwm installed already, but user did not backup official rom before changing roms, so now its bootlooping, and no way to flash anything on it. I think last resort is restoring official rom dump. Or maybe some other ROMs if someone can provide dump of it. If size is problem, PM me, I can provide way to upload big files. Thanks in advance!!

johhnycash said:
Hi,
I need backup/dump for protab 3 xxl, v1.1 (I think any v1.x will do). It has cwm installed already, but user did not backup official rom before changing roms, so now its bootlooping, and no way to flash anything on it. I think last resort is restoring official rom dump. Or maybe some other ROMs if someone can provide dump of it. If size is problem, PM me, I can provide way to upload big files. Thanks in advance!!
Click to expand...
Click to collapse
Just after install CWM, I'll make backup and post it here.

Korny(CzE) said:
Just after install CWM, I'll make backup and post it here.
Click to expand...
Click to collapse
Thanks a million, you are life saver!!! :good:

I have v1.0 did you try this?

Korny(CzE) said:
I have v1.0 did you try this?
Click to expand...
Click to collapse
I have, it does not work since flash tool needs working tablet. This one cant even boot. Only cwm works...

johhnycash said:
I have, it does not work since flash tool needs working tablet. This one cant even boot. Only cwm works...
Click to expand...
Click to collapse
It's not quite as easy as I expected. So far I failed to flash CWM. Update are fail. What steps are you / user you used?

Korny(CzE) said:
It's not quite as easy as I expected. So far I failed to flash CWM. Update are fail. What steps are you / user you used?
Click to expand...
Click to collapse
Friend doesnt remember, but I believe he used rkflashtool. Here are listed all possible ways to do it : http://androtab.info/clockworkmod/rockchip/install/
Good luck :good:

Ok, finally I was flashed it via root shell. Its backing up right now. After finish, i will upload it somehwere and post link here.

There is.

Korny(CzE) said:
There is.
Click to expand...
Click to collapse
Thank you very much. Downloaded already but have trouble entering cwm. What is correct procedure to enter cwm? Releasing power button and pressing and holding volume up and down when point of view logo appears? I tried almost every combination of keys and no way to enter it. Could be cwm got deleted when I tried to install some rk3066 rom for archos tablet. I dont believe it, but that would be logical explanation as to why I cannot enter it.
Last hope will be trying maskrom mode, by shorting nand chip and hoping it shows up in rkflash tool.

I am not using button combo, coz I have app for reboot to recovery. I will try it.
Odesláno z mého GT-I9505 pomocí Tapatalk

[TOOL][WIN]Gstreamer emergency toolbox, for devices with broken lcd or digitizer ;)

Hi all, i passed trough the bad experience of a phone with a broken screen, all my data was trapped inside the device and i couldn't see nothing on the screen :crying:
So i decided to develop a little app, in order to be able to break into my phone again and save the more stuff i could.
Gstreamer (aka Ghost streamer) is able to let you see your device screen once again (that was the primary purpose...) and deal with it by clicking and swiping with your mousepointer on your phone screen picture (yes, it's slow but it gets the job done )but without the need to install softwares like VNC and similars (Gstreamer only allows you to gain access your files in a way or another and try to save it),.
If your dead phone was rooted and with a custom recovery, then yur life will be easy in case of broken screen , but if not , then the music changes a lot, that's why i thought my software could help other people to solve theproblems i meet during my data rescue attempts.
No matter the device screensize, it will adapt to your device screensize and will make your life easier if you broken your phone screen.
I'm still adding features to it, and planning to organize it in a better way, correcting some bugs, testing it on different phones and android versions,but it's actually working and improving day by day
if someone is interested in testing it with me, and report then the experience i'd be happy to cooperate.
at the moment this is the pre-alpha stage for me , but this is how it looks now
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
if you are having bad times with your phone screen this may help you :fingers-crossed: just contact me if interested
use at your own risk it's still experimental, download it from the link below
http://www.filedropper.com/gstreamerv1000release

open for feature requests here , if you want me to add special functions, just ask here and i will see if it can be embedded or not.
get the latest nightly build on my git, just click on the "Download ZIP" button. (link below)
any advice is appreciated, thank you.
changelog!
new release, now the Apk operations are ok , now you can list, uninstall, pull, install apk from your PC.
always get the latest release from my git
https://github.com/TheBrainBooster/Gstreamer/archive/master.zip

BrainBooster said:
open for feature requests here , if you want me to add special functions, just ask here and i will see if it can be embedded or not.
get the latest nightly build here https://github.com/TheBrainBooster/Gstreamer just click on the "Download ZIP" button.
any advice is appreciated, thank you.
changelog!
new release, now the Apk operations are ok , now you can list, uninstall, pull, install apk from your PC.
always get the latest release from my git
https://github.com/TheBrainBooster/Gstreamer/archive/master.zip
Click to expand...
Click to collapse
new changelog! V1.2.1.0 release
added dpad navigation buttons
minor bugfixes
redesigned main panel
new changelog! V1.2.2 is available for the download
added swipe buttons
added memory info
minor bugfixex
check it out and let me know testers are welcome
01/02/2016
new changelog!
minur bug fixes
added file push , pull and sideload functions
...sadly i don't have feedback so i can't be sure it will work with all the android versions

...many changes heve been done, stay tuned for the next release

Hello,
tried you app, but it does not recognize my phone, because it has not debugging mode activated. I tried even "RSA ADB key inejection and..." but with no luck. For anther device, which has debugging mode active, I was able to get its data, but for the one with broken display and no debugging mode, it doesn't.
Any hints?
Regards,

can you provide some more informations about your device?
maybe you could try to repeat the procedure but in recovery mode

Hello,
Thanks for your time. So far you're the only one who gave me something as an information, or tip/hint.
My phone is an Samsung i9300i, with stock rom, only recently when trying to get the data through ADB, I have installed via ODIN an image named "CWM Recovery v6.0.3.6.tar", but still no effect in ADB.
Before replying to you I have tried recovery mode as well (power button, home, volume - and after 5 seconds volume up- as those were the steps required for my model to get into download mode). But I cannot get your up to recognize my phone. I tried with another one (HTC One M8s), with debugging mode on and the app recognize it in a flash. But with the broken one, no luck.
Are there necessary some custom drivers? Do you think some print screens could help?

a screenshot could help for sure
installing the proper adb drivers too, try with this --> http://forum.xda-developers.com/showpost.php?p=50008343&postcount=486
also installing the official kies software by samsung may help
whas the phone rooted?
can it boot normally?
do you see something on the screen?
what is the damage on you phone?
android version?

Hello and good morning (for me it's still morning),
No, the phone was not rooted, was "untouched". I gave up the idea I can retrieve data via software and I was thinking to try to open it and have a display temporary put, but it's time consuming and I'm short on time to recover the data (some business information for my boss).
I'll try the drivers you have wrote and I'll came back with screen shots as well.
Regards,

sorry for the late post edit, but it came to my mind after i wrote
by the way... are you sure you booted into recovery mode?
my software shoud see the phone anyway when you hit the test conection button

Hello and good morning (for me it's still morning),
No, the phone was not rooted, was "untouched". I gave up the idea I can retrieve data via software and I was thinking to try to open it and have a display temporary put, but it's time consuming and I'm short on time to recover the data (some business information for my boss).
I'll try the drivers you have wrote and I'll came back with screen shots as well.
LE: Yes, I'm booting in download/recovery mode (combination of pow+volume minus + home buttons and volume up after 5 -7 seconds - steps specific for Sam i9300i phones)
Regards,

miborion said:
Hello and good morning (for me it's still morning),
No, the phone was not rooted, was "untouched". I gave up the idea I can retrieve data via software and I was thinking to try to open it and have a display temporary put, but it's time consuming and I'm short on time to recover the data (some business information for my boss).
I'll try the drivers you have wrote and I'll came back with screen shots as well.
LE: Yes, I'm booting in download/recovery mode (combination of pow+volume minus + home buttons and volume up after 5 -7 seconds - steps specific for Sam i9300i phones)
Regards,
Click to expand...
Click to collapse
so you shoud see the phone connected maybe it will say: device-12345abcdefyourphoneID-(recovery) but if you have the drivers installed it should appear in the log window, moreover you said maybe you have a CWM recovery installed...
remember to reboot your pc ater the drivers setup

BrainBooster said:
so you shoud see the phone connected maybe it will say: device-12345abcdefyourphoneID-(recovery) but if you have the drivers installed it should appear in the log window, moreover you said maybe you have a CWM recovery installed...
remember to reboot your pc ater the drivers setup
Click to expand...
Click to collapse
Indeed I have had installed CWM (if by that you are referring to "CWM Recovery v6.0.3.6.tar" file - which I did, using ODIN (v.307)), as I thought the debugging mode would be activated, but it seem it doesn't. Please can you give me more details about what did you want to say by " moreover you said maybe you have a CWM recovery installed..."? Is it a bad thing? Should I flash to a stock rom?
And no, it does not show any devices like device-1234afsadsasdasd.
Regards,

what i mean is, if you installed a custom recovery and you also have your phone drivers properly installed you should have an adbd server running on the phone(provided by the custom recovery environment) and an adb client running on the pc, so they should see each other

BrainBooster said:
what i mean is, if you installed a custom recovery and you also have your phone drivers properly installed you should have an adbd server running on the phone(provided by the custom recovery environment) and an adb client running on the pc, so they should see each other
Click to expand...
Click to collapse
Ok, now I understand what is the purpose for that img.
So, bottom line is I cannot seem to install proper drivers. I'll try different combinations of uninstall plus install drivers from your link (i had used the ones from Samsung site, released this year), plus computer reboot, as so far I wasn't able to have ADB listener list my device (or your application).
Regards,

Root it! everything will be much more easy
http://androidmtk.com/root-samsung-galaxy-s3-neo-gt-i9300i

BrainBooster said:
Root it! everything will be much more easy
http://androidmtk.com/root-samsung-galaxy-s3-neo-gt-i9300i
Click to expand...
Click to collapse
I'll try, but, I'm not able to check what is my build number. As far as I know, I have only the stock image (exactly as the phone came with) and am sure it hasn't have the 4.4.4 version, but something like 4.3 something...I have a colleague, back at work which has some same device (Sam I9300i) and I could check the version on that terminal and try my luck.
Thanks again for your time and insight

miborion said:
I'll try, but, I'm not able to check what is my build number. As far as I know, I have only the stock image (exactly as the phone came with) and am sure it hasn't have the 4.4.4 version, but something like 4.3 something...I have a colleague, back at work which has some same device (Sam I9300i) and I could check the version on that terminal and try my luck.
Thanks again for your time and insight
Click to expand...
Click to collapse
anytime
if you need further help , just ask

BrainBooster said:
anytime
if you need further help , just ask
Click to expand...
Click to collapse
Hello,
I've just finished all leads meaning I have successfully rooted the phone by using your link; I got PASS message in ODIN using the exact image as the tutorial indicated. But, still I cannot connect to the phone with ADB, or by using your app.
If I boot normally I can hear the sound, see the top buttons lid and have the popup message in windows which tells me I can browse the mobile phone's content (onStdBoot.jpg).
If I boot in recovery mode (can see COM0 used in ODIN and can flash successfully) I get the devices on the second print screen (BootInDownloadMode.jpg) but cannot access it.
Could you please advise if there is anything else I can try?
Regards,

if you successfully rooted your device, booting it in recovery mode should make it show in my software

NuVision TM800A510L- General Info (Root, Recovery, Unbrick)

This thread intends to be a general thread for all things about the NuVision Tablet. The aim is to help other users of this tablet to be able to root their device, get a temporary recovery and to unbrick their device. I will add the guides for the following posts below in time. This would not have been possible without help from @andrei_kr.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Technical Specifications:
Display: 8-inch IPS HD capacitive touchscreen
Resolution: 1280 x 800
Operating System: Android 4.4 Kit Kat
Processor: Intel® Atom Processor
Memory: 1GB DDR
Storage: 16GB
Micro SD Card Slot: Yes, expandable up to 64GB
Camera - Rear: 2MP
Camera - Front: 2MP
Audio: 3.5mm stereo jack with microphone
Wireless: Wi-Fi 802.11 b/g/n
Bluetooth: Bluetooth 4.0
Battery Type: Rechargeable lithium-ion
Battery Life: 6+ hours; results will vary based on usage and settings
Port: Micro USB
Sensor(s): Accelerometer

Backup/Root/Recovery
DISCLAIMER:
Rooting your phone and using custom Recoveries and ROM's have risks and may result in bricking your device, and has nothing to do with Google or the device manufacturers. In case of any mishap I am not responsible if you brick/ruin your phone in any way.
Basic computer skills are required and minimal knowledge about the phone and phone utilities also.
Make sure that whatever you do, you are doing it at your own responsibility.
How to backup of your stock ROM, install CWM and Root your device.
Requirements
ADB/Fastboot Drivers
Intel Android USB Drivers
SDcard (8GB of higher)
Temp recovery script
SuperSU
Steps
Download and unpack IntelAndroid-FBRL-07-24-2015.7z
Power off tab.
Hold Vol+ and press Power on the tab 5-10 seconds
You can see logo about 10 sec and after that DROIDBOOT will load
Connect USB cable to PC
Run launch.bat from IntelAndroid-FBRL-07-24-2015 folder
Type ACCEPT and press Enter
Type 5 and ENTER (cwm.zip)
Type T3 and ENTER (or T4)
CWM will load after 10 sec.
Select backup to external sd card.
After the backup is complete, copy it to the PC to ensure it's safe.
Follow steps 1-10 again and go to install zip from sdcard or external and select the SuperSU zip file and flash it.
NOTE: DO NOT FLASH ANY ROMS WITH THIS RECOVERY IT IS ONLY TEMPORARY. I DID NOT TEST XPOSED SO BE CAREFUL.
Credits
@andrei_kr
@social-design-concepts
@vampirefo
@Chainfire

Unbrick your Tab!
To unbrick your device all you simply have to do is go back to the CWM and restore your backup that you created earlier. If you don't have one, here is a copy of a working backup ---> Google Drive. Credits to @andrei_kr, say thanks!

How to fix touch!
If you unbricked your tablet and your touch isn't working, there is no need to worry. @andrei_kr has provided a guide on how to fix that touchscreen. Credits to him.
NOTE: If your touch is working then do not try this, it will mess up your touch!!
You probably got this touchscreen issue by flashing a different kernel with incorrect drivers.
Now your configuration is likely to differ from the native. You can view the konifig in command prompt or in the terminal :
Code:
cat /proc/gt9xx_config
(only mtk) or using the gtp_tools apk (it is in the attached file below).
It starts with the byte sequence: 0x41 0x1C 0x02 0xC0 0x03
0x41 - 65 version
0x1C 0x02 - 540 horizontal resolution
0xC0 0x03 - 960 vertical resolution
Touch must somehow work to press the button, if there is support otg, then it's easier, you can connect a mouse.
1. Install the gtp_tools_v2.6_20140126_special.apk
2. Go to the option Firmware update. Click refresh, see IC Version: 913_1020 then touch GT913 firmware and 1020.
3. Go to the option Config Settings, press read, the data were considered. Under Normal Config we have:
65 version
540 horizontal resolution
960 vertical resolution
4. Click browse, select click browse to the native config.
5. Native configuration take from your device, in the same paragraph, press the save (saves the backup config file). Native configuration for Fly IQ446 in the attached file. Press send.
6. If nothing has changed, look at the version you have and native config. Then change the version of the file in the native config in your hex.
Example: 0x41 = 65 home, a stranger 0x49 = 73 => replace the 0x41 to 0x49.

Xposed does work
Make sure you're rooted and have a working backup.
Download and install Xposed but don't run yet.
Version name:
2.6.1
Release type:
Stable (low risk of bugs)
Download:
de.robv.android.xposed.installer_v32_de4f0d.apk (711.77 KB)
Number of downloads:
11,141,690 in total · 8,610 in the last 24 hours
MD5 checksum:
de4f0dc569f96dbcc5668d40fa76040b
Uploaded on:
Tuesday, May 20, 2014 - 21:59
Changes:
- Fixed a crash with some apps (Disa, Rdio)
- Some minor UI improvements
- A few translation updates
Now either use an android terminal emulator or ADB and run these commands
1. su
2. echo 148 > /data/data/de.robv.android.xposed.installer/conf/jit_reset_offset
3. chmod 664 /data/data/de.robv.android.xposed.installer/conf/jit_reset_offset
Now you can install the Xposed framework.

max0r4axor said:
Xposed does work
Make sure you're rooted and have a working backup.
Download and install Xposed but don't run yet.
Version name:
2.6.1
Release type:
Stable (low risk of bugs)
Download:
de.robv.android.xposed.installer_v32_de4f0d.apk .
Click to expand...
Click to collapse
Thanks for report.

First want to say much thanks for this thread, it was getting frustrating trying to find a solution.
I have encountered a slight issue trying to unstuck 2 of these devices.
neither have been rooted and are stock devices.
i cant seem to get cwm to locate the backup that you supplied.
do i need to copy it to the cwm backup folder on my sd card?

Jingbadguy said:
First want to say much thanks for this thread, it was getting frustrating trying to find a solution.
I have encountered a slight issue trying to unstuck 2 of these devices.
neither have been rooted and are stock devices.
i cant seem to get cwm to locate the backup that you supplied.
do i need to copy it to the cwm backup folder on my sd card?
Click to expand...
Click to collapse
Yes you do. Copy it to your sd card. Btw if your device is stock why do you want to restore this one?

kirito9 said:
Yes you do. Copy it to your sd card. Btw if your device is stock why do you want to restore this one?
Click to expand...
Click to collapse
both are stuck in bootloader.
i was assuming i could just just reflash...
cant find a stock copy anywhere...

Jingbadguy said:
both are stuck in bootloader.
i was assuming i could just just reflash...
cant find a stock copy anywhere...
Click to expand...
Click to collapse
Oh I thought they were working. Follow the procedure above to fix.

NuVision TM101A510L
Will this method work with the NuVison TM101A510L. It seems like a lot of work to do if I'm not sure about this model. Also I have a problem with this model overheating and crashing when I play Pixel Gun 3d and it's pissing me off. I just fired off a curse filled missive to NuVision support. They don't even list this model on their registration page and it seems they have no faith in this model. I will never buy this brand again, in fact I would recommend against it to my customers. I've used Azpen tablets with no problem rooting or playing Pixel Gun 3d. I took a chance and I'm so damned sorry I did.
;angry

Thank you so much for this thread!!! I have been looking for a recovery for a few months now and cant believe I didn't find this until now...

ok so a minor problem... I cant seem to flash the recovery... Not sure if ive placed the recovery file on my sd card properly or not cause i locate a few backup files none of which have any effect. I gave up in frustration untill now. ( Currrently working on a few androids one rooting one imea changing so figured id take a crack at these devices again. THe layer of dust on these things are getting a bit thick.)

williamglick said:
Will this method work with the NuVison TM101A510L. It seems like a lot of work to do if I'm not sure about this model. Also I have a problem with this model overheating and crashing when I play Pixel Gun 3d and it's pissing me off. I just fired off a curse filled missive to NuVision support. They don't even list this model on their registration page and it seems they have no faith in this model. I will never buy this brand again, in fact I would recommend against it to my customers. I've used Azpen tablets with no problem rooting or playing Pixel Gun 3d. I took a chance and I'm so damned sorry I did.
;angry
Click to expand...
Click to collapse
I think the models numbers are specific so I can't say for certain that this will work with your tab. Try the fastboot/rooting procedure first and then maybe you can just restore the system partition only not corrupting the boot/kernel.

Unidave199 said:
Thank you so much for this thread!!! I have been looking for a recovery for a few months now and cant believe I didn't find this until now...
Click to expand...
Click to collapse
You're welcome. I waited months also before finding a working backup.

Jingbadguy said:
ok so a minor problem... I cant seem to flash the recovery... Not sure if ive placed the recovery file on my sd card properly or not cause i locate a few backup files none of which have any effect. I gave up in frustration untill now. ( Currrently working on a few androids one rooting one imea changing so figured id take a crack at these devices again. THe layer of dust on these things are getting a bit thick.)
Click to expand...
Click to collapse
You are using the fastboot method correct? If the recovery script says finished as in no errors show on the screen then it could be the device itself. What do you see?

kirito9 said:
You are using the fastboot method correct? If the recovery script says finished as in no errors show on the screen then it could be the device itself. What do you see?
Click to expand...
Click to collapse
ill let you know just as soon as i can get back to working on those devices... im prety sure if memory serves correctly, that I was getting some errors regarding unable to mound sd or ext sd. I could be wrong but thats what comes to mind.
Im up to my neck in jobs on other devices. (rooting galaxy S5, changing imei on another S5, IMEI change on a LG Stylo 2 plus, Galaxy Tab 2 system issues need to diagnose, and several screen and lcd replacments)

STUCK
ok so i have a little time to work on these....
When i run the launch.bat and get to fastboot, it goes through the instalation and everything checks ok till the very end where it says failed cause too many links.
included the screenshot so you can see.
At this point im unsure if i just need to try flashing the supersu zip like it instructs but having tried befor it had no luck.
can I not just flash twrp on this thing then su like with most root methods?

after ive flashed super su, when i go to restor the working backup i see a list of backups... including yours but when i select it i always get :
checking md5 sums...
md5 mismatch!
what now?
(i tried just flashing the boot but even that comes back with same error)
I know on other devices the recovery is an img file any the one you provide is a rar... i extracted to my desktop and was gonna try flashing with abd/fastboot but since its not an img file, im thinking it wont work...
any thoughts?
Im still unsure how to flash the recovery that u supply in the section for fixing bootloop....

Jingbadguy said:
ok so i have a little time to work on these....
When i run the launch.bat and get to fastboot, it goes through the instalation and everything checks ok till the very end where it says failed cause too many links.
included the screenshot so you can see.
At this point im unsure if i just need to try flashing the supersu zip like it instructs but having tried befor it had no luck.
can I not just flash twrp on this thing then su like with most root methods?
Click to expand...
Click to collapse
The too many links error is common for this device. Touch doesn't work with TWRP on this device so CWM is out only go. You can root and using cwm like any other root method.