Related
Right, had desire s from three, alpharevx'd it installed clockwork mod, flashed eng hboot. Tried to flash RUU 1.47 europe on it, and it started to work and go through process, updated radio fine, then came up with CID error. No option to do anything but exit. Now I have a desire s that will boot into Bootloader, which has now s-on'd itself and upgraded to 0.98.0002.
Only method of comms seems to be via fastboot.
Now i cant flash the h3g one cos its too low a bootloader version, and i cant upgrade to a newer version cos one don't exist. Can anyone come up with a solution please??
Cheers.
What does HBOOT screen say (in full)?
Are you still able to get into recovery? If yes, then have you tried loading a custom ROM onto the SD card and simply flashing that using the flash zip from sd card option of CWM (clock work mod)?
Unfortunately I am unable to get into recovery, only bootloader, nothing else works. Hboot is displaying a security error at the top highlighted in pink, followed by the version number as described
You should have stuck with the alpharev hboot, which does not allow itself to be overwritten by RUU installs.
Anyway, you need to:
- install hboot 0.980000 (so you can run alpharevx again and get S-OFF)
- run alpharevx and reinstall CWM at the end
- DO NOT install the eng hboot
- flash whatever rom whichever way you want. Your hboot is safe
Follow the instructions on:
http://forum.xda-developers.com/showthread.php?t=1187231
How can I run alpharevx when I can only boot into bootloader tho?
Try running it while in bootloader. Never tryed it that way, but I'm pretty sure it only needs the USB comms to be up, same as adb. Which they should be anyway in bootloader...
Have you tried to re-setup your phone by executing one of the RUU.exe?
k, as i expected, with no access to adb in bootloader mode, i am unable to do anything. Remember, i only have bootloader to work from. I don't eve3n have a recovery partition installed, it just comes back to bootloader whatever i choose, well, bootloader and fastboot anyway.
yup, tried running the ruu again but to no avail. Just get cid error. And i can't make a goldcard either cos i cant get the code. Might just send it back i think and act dumb :/
What about using the "normal" upadte procedure? Placing the PG88(whatever).zip on the root of the sdcard, and have the bootloader install it?
Of courtse with S-ON, it must be a signed version...
If all else fails s-off with xtc clip then flash custom rom
Sent from my HTC Desire S using XDA Premium App
Have you tried to use the original RUU for your phone/network? I'm not sure if it would take care of the CID error.
Any of these:
http://forum.xda-developers.com/showthread.php?t=1002506
Clivectmob said:
yup, tried running the ruu again but to no avail. Just get cid error. And i can't make a goldcard either cos i cant get the code. Might just send it back i think and act dumb :/
Click to expand...
Click to collapse
I do not expect this to work, but you said you are able to get into recovery, correct?
Well, I would try to enter fastboot mode and try to flash cwm via fastboot -> fastboot flash recovery XXXXXXXX.img
Correct (windows) drivers installed?
Edit:
lowveld said:
What about using the "normal" upadte procedure? Placing the PG88(whatever).zip on the root of the sdcard, and have the bootloader install it?
Of courtse with S-ON, it must be a signed version...
Click to expand...
Click to collapse
Good suggestion! Try this one first.
The problem with trying my original ruu for my network is that it contains the lower hboot version, when i flashed the generic ruu earlier, it actually started the update and flashed the radio part, then informed me the cid error, of course, by this time it had updated the hboot too. So now i have a desire s with an upgraded hboot so i can't flash a new one because of cid error and i can;t go back cos it reports a hboot version error. Where do i look on the system for the p88ing.zip now? can't remember now!
I haven't run a RUU in years, but I think that when you run it on a windows machine, it extracts a bunch of files to a directory. Cancel the process, find the directory, find th PG88... in the directory... You get the drift.
Clivectmob said:
The problem with trying my original ruu for my network is that it contains the lower hboot version, when i flashed the generic ruu earlier, it actually started the update and flashed the radio part, then informed me the cid error, of course, by this time it had updated the hboot too. So now i have a desire s with an upgraded hboot so i can't flash a new one because of cid error and i can;t go back cos it reports a hboot version error. Where do i look on the system for the p88ing.zip now? can't remember now!
Click to expand...
Click to collapse
It is not relevant which network you are using !!! Just try newest RUU to get control over your phone again in the first place!
Even if you don't get any network access after setup newest RUU you will definitely be abte to execute alpharevx again, flash cwm and flash any stuff you want to.
just tried flashing via fastboot, got a remote bootloader signature fail response (recovery)
Clivectmob said:
just tried flashing via fastboot, got a remote bootloader signature fail response (recovery)
Click to expand...
Click to collapse
I guess that means you tried flashing recovery via fastboot?
Then concentrate on our RUU-suggestions.
Yes, as i said, flashed via fastboot, and i already explained that i cant up/down grade via ruu method because of bootloader version. I can't think of a way out of this as it stands. The only thing that may work is doing it via the p88img method with my original 3uk rom, but i cant find it in my temp files, searched everywhere for it. I've seen it's location posted on here before now, and i've searched it to death and can't seem to find it now
I'm going to extract and upload your 3GUK-PG88*.img although I think you'll need an newer one. Just a few minutes of patience.
Hi everyone,
I feel kind of bad for asking such a generic question like this, and I assure you that I have read around and done my research, but before I do potentially dangerous, irreversible, things to my device, I just want to make sure that I will perform the necessary steps correctly.
Basically, I have owned my HOX since launch date, and it came with either 1.73 or 1.85 base. As such, I rooted and unlocked the bootloader as soon as the exploits were available, and have been comfortably flashing ROMs and kernels every since. However, I have been experiencing some issues with data connectivity and stuff, issues that remain with any ROM, kernel, or radio that I flash. The details aren't important...
Now, I want to basically "start over" with my HOX. As if it was a brand new, unmodified, fresh device. So basically, unroot, relock bootloader, RUU, etc... And then start all over, root, unlock bootloader, install recovery, etc.....
Basically, what exact steps do I need to take to accomplish the "starting over"? As in the methods to use, the RUU to use, etc... ?
An outline of the steps, basically. My biggest fear is restoring to the wrong thing and losing my old HBOOT.
Again, I know this question probably gets asked often, but please bear with me through this.
I ruu'd my wife a and it was about 3 weeks before att sent her the next update lol. As long as you don't accept it you'll be fine. I'm sure you'd prolly root as soon as its finished anyway..
But you got it right. No need to unroot, just fire up fastboot and enter "fastboot oem lock". (Without quotes)
Figure out which ruu you need, most likely 1.85. Make sure you have the right HTC drivers updated, and make sure HTC sync is working right. Download ruu, which is an executable application, and run it. It should factory restore your phone like the day you bought it.
As far as restoring to the "bad" hboot, it shouldn't let you complete an ruu that's for another firmware other than what you had on it when you got root... So you'll be safe. Good luck bro, come back and let us know how it went :thumbup:
Sent from my One X using Tapatalk 2
So basically relock the bootloader with "fastboot oem lock" , and then RUU, and I have a fresh new phone?
And for determining which RUU I need, either 1.73 or 1.85, if I try running the wrong one, it will stop me?
And since I'm still on the older HBOOT with the older initial base, root and unlock the same way I did originally?
And also, once I relock my boot loader, should I immediately RUU?
So a full outline would be:
Connect phone to computer ( with drivers and all)
Boot into fast boot
Relock bootloader with command
RUU
Let phone boot
Re-root
Re-unlock bootloader
Install recovery
Flash ROMS!
?
And just because it's been forever since I've done it, what are the steps again for RUUing? Do I need to boot the phone into any special mode? Or I just connect the phone to the PC and run the RUU?
And after I relock the bootloader, will the phone reboot out of fastboot or anything? Or should I go immediately from the relock phase to the RUU phase?
Thanks
So basically relock the bootloader with "fastboot oem lock" , and then RUU, and I have a fresh new phone? You got it.
And for determining which RUU I need, either 1.73 or 1.85, if I try running the wrong one, it will stop me? Yes, it'll throw an error when you try to go through the RUU install process.
And since I'm still on the older HBOOT with the older initial base, root and unlock the same way I did originally? Yes. This is a fresh phone install after you run the RUU (like the day you bought it).
And also, once I relock my boot loader, should I immediately RUU? Yes. There's not a lot else you really need to do (especially on bricked phones, not a lot you CAN do).
So a full outline would be:
Connect phone to computer ( with drivers and all)
Boot into fast boot
Relock bootloader with command
RUU
Let phone boot
Re-root
Re-unlock bootloader
Install recovery
Flash ROMS!
? - Yes, that's pretty much it.
And just because it's been forever since I've done it, what are the steps again for RUUing? Do I need to boot the phone into any special mode? Or I just connect the phone to the PC and run the RUU? - Connect to pc in fastboot usb and run it from there.
And after I relock the bootloader, will the phone reboot out of fastboot or anything? - Nope, it'll stay in fastboot unless you reboot it.
Or should I go immediately from the relock phase to the RUU phase? - That makes things a little faster
Yep.. Run it from anywhere, as long as your computer recognizes your device let us know how it goes
Sent from my One X using Tapatalk 2
Ok, thanks a lot.
I don't have a PC with me right now (mac user) but once I get the opportunity I will go through with this. Thanks again!
Im hoping this thread may help me to solve my problem (I'm a total noob too lol)
I rooted and flashed a Rom on my HTC One S, and I had the same issues as OP
Im with Fido, but I was told that both Fido and Rogers use the same RUU
Trying to go back to stock, I relocked the bootloader.
1. then I ran the RUU (found a tutorial online), but I got an error message (155: wrong RUU or file cant be larger or something like that)
2. then I tried an alternative method : extract 2 files from the RUU, move them to another folder and from there run a cmd; didnt work either
(By the way, in method number 1, I also had to flash a recovery file (stock recovery) during the bootloader unlock process)
Did I do it the right way?
Can some Senior member give me a detailed step by step method?
Why do you keep posting HTC ONE S questions in our HTC ONE X forum? What is wrong with using the correct forum?
954wrecker said:
Why do you keep posting HTC ONE S questions in our HTC ONE X forum? What is wrong with using the correct forum?
Click to expand...
Click to collapse
Yeah.
954wrecker said:
Why do you keep posting HTC ONE S questions in our HTC ONE X forum? What is wrong with using the correct forum?
Click to expand...
Click to collapse
I did ???
Hey what do you know :laugh:
I have tried to do this multiple times, but no matter how many times a run the 2.2 exploit, and flash the unlock code bootloader continues to say relocked? any ideas
Yes, you need to check your pm. You need to hard reset the device. Hold power until device reboots, capacitive keys will flash during the process. Then run the unlock and you're device will unlock. I spent a full day to figure this out... Lol
Sent from my HTC One XL using Tapatalk 2
anyone happen to have a link on how to reset your phone back to factory defaults? i've had too many issues with roms, and my wifi, and as i use it for work, i cant have this happening.
I didn't back up the factory ROM before i started flashing, does that mean im pretty much screwed?
I have Hboot 1.14
Behemyth said:
anyone happen to have a link on how to reset your phone back to factory defaults? i've had too many issues with roms, and my wifi, and as i use it for work, i cant have this happening.
I didn't back up the factory ROM before i started flashing, does that mean im pretty much screwed?
I have Hboot 1.14
Click to expand...
Click to collapse
If you want to reset to stock just run the ruu like the poster above is trying to do.
Sent from my HTC One XL
ECEXCURSION said:
If you want to reset to stock just run the ruu like the poster above is trying to do.
Sent from my HTC One XL
Click to expand...
Click to collapse
Nobody answered his question about if he needs to find a RUU specific to his device. I've been looking and can't find an RUU specific to 1.14, and I dont want to chance bricking my device.
Behemyth said:
Nobody answered his question about if he needs to find a RUU specific to his device. I've been looking and can't find an RUU specific to 1.14, and I dont want to chance bricking my device.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1671237
scroll down to the stock ruu section and look up the firmware 2.2 not the hboot 1.14
Well, I'm the OP, and I ended up figuring out what RUU to use, which was 1.73. Basically, I ran 'fastboot oem lock' , then ran the RUU right afterwards, then booted up and ran the root exploit, rooted, and then ran 'fastboot oem unlock' using my old Unlock.bin file that I had from the very first time I unlocked the bootloader. From there, I installed a custom recovery and was good to go.
Yah, if your using 2.20 firmware, run the below link, works like a charm. Must make sure you re-lock the bootloader before, or it will error out. Just hold down the power button until it turns off if this happens.
possible brick
Skeeterdrums said:
So basically relock the bootloader with "fastboot oem lock" , and then RUU, and I have a fresh new phone? You got it.
And for determining which RUU I need, either 1.73 or 1.85, if I try running the wrong one, it will stop me? Yes, it'll throw an error when you try to go through the RUU install process.
And since I'm still on the older HBOOT with the older initial base, root and unlock the same way I did originally? Yes. This is a fresh phone install after you run the RUU (like the day you bought it).
And also, once I relock my boot loader, should I immediately RUU? Yes. There's not a lot else you really need to do (especially on bricked phones, not a lot you CAN do).
So a full outline would be:
Connect phone to computer ( with drivers and all)
Boot into fast boot
Relock bootloader with command
RUU
Let phone boot
Re-root
Re-unlock bootloader
Install recovery
Flash ROMS!
? - Yes, that's pretty much it.
And just because it's been forever since I've done it, what are the steps again for RUUing? Do I need to boot the phone into any special mode? Or I just connect the phone to the PC and run the RUU? - Connect to pc in fastboot usb and run it from there.
And after I relock the bootloader, will the phone reboot out of fastboot or anything? - Nope, it'll stay in fastboot unless you reboot it.
Or should I go immediately from the relock phase to the RUU phase? - That makes things a little faster
Click to expand...
Click to collapse
I did this, but my phone never boots. It just stays at the bootloader after i run the RUU. Any ideas? :/
Also, i get the "this build is for development purposes only" message under the HTC logo before the phone enters the bootloader.
EDIT: managed to get the bootloadr unlocked again via HTCDev.com and flashed recovery and ROM. Guess Im not starting fresh after all lol
Hello, I have Unlocked bootloader, S-ON and rooted telephone , can I put custom ROM, or pre-rooted RUU-ICS, Version HBOOT is 2.00.02.
I Know that must downgrade on 09.000.02 hboot-a, that I have S-off.
Can I put custom ROM, or RUU, or pre-rooted ROM, I want ICS-RUU. on phone with this caracteristics.
I really confused because S-ON, did I can do this.
Thanks advanced.
dejanxxxx said:
Hello, I have Unlocked bootloader, S-ON and rooted telephone , can I put custom ROM, or pre-rooted RUU-ICS, Version HBOOT is 2.00.02.
I Know that must downgrade on 09.000.02 hboot-a, that I have S-off.
Can I put custom ROM, or RUU, or pre-rooted ROM, I want ICS-RUU. on phone with this caracteristics.
I really confused because S-ON, did I can do this.
Thanks advanced.
Click to expand...
Click to collapse
Yes you can. You don't need to achieve S-OFF to install custom ROM. I don't recommend you to install Official RUU ICS because it has been reported many times to be buggy and laggy. If you want a better feeling of that, you should install IceDS or IceCreamSaga ROMs.
I have another problem. I wanted put RUU-ICS, but always get message ERROR 155. Every time, I dont know why. I am from Serbia, and people from HTC send me a link for RUU - ICS, and when I start with proces- eject ERROR 155-every time, after I tried another RUU-ICS again error 155, I tried 4 RUU- ics, and always error 155.
Why I get always this message, and what I do?. S-ON, bootloader-relocked, rooted phone.
i tried this and i flashed a custom rom with s-on and it just keeps booting into recovery mode
dejanxxxx said:
I have another problem. I wanted put RUU-ICS, but always get message ERROR 155. Every time, I dont know why. I am from Serbia, and people from HTC send me a link for RUU - ICS, and when I start with proces- eject ERROR 155-every time, after I tried another RUU-ICS again error 155, I tried 4 RUU- ics, and always error 155.
Why I get always this message, and what I do?. S-ON, bootloader-relocked, rooted phone.
Click to expand...
Click to collapse
Is your phone branded to any mobile carrier- by any chance?
Because if it was, to override the branded version by WWE 4.0.4
( world wide english )
you should use < gold card >
http://forum.xda-developers.com/showthread.php?t=1248095
If i remember correctly, error 155 refers to CID mismatch- wrong RUU version
But in your best interest is to double check what others say
Edit: unles something has changed,
there was only one ics ruu version for desire s
to be found on htcdev website..
How come you found four of them?
seagheart89 said:
i tried this and i flashed a custom rom with s-on and it just keeps booting into recovery mode
Click to expand...
Click to collapse
Did you flash the boot.img?
"If I were two-faced, would I be wearing this one?"
- Abraham Lincoln (1809-1865)
jugg1es said:
Did you flash the boot.img?
"If I were two-faced, would I be wearing this one?"
- Abraham Lincoln (1809-1865)
Click to expand...
Click to collapse
it didnt give me an option for boot.img it used the aroma installer
message ERROR 155 for original RUU ICS - means that you have unlocked bootlocker.
You must relock bootlocker with fastboot and start installation again - it will work.
Commant: "fastboot oem lock"
BR.
continiven said:
message ERROR 155 for original RUU ICS - means that you have unlocked bootlocker.
You must relock bootlocker with fastboot and start installation again - it will work.
Commant: "fastboot oem lock"
BR.
Click to expand...
Click to collapse
I have this problem. Because my girl friend dont want custom ROM, I install RUU-ICS. But always when start flashing,eject 155 error, bootloader first unlocked, after before process I locked again bootloader,and in HBOOT writing RELOCKED-you say this is mistake because bootloader is unlocked, it not true- on my case.
After I use HTC SYNC- register phone and recognized, everything pass easy,and ROM is installed.
seagheart89 said:
it didnt give me an option for boot.img it used the aroma installer
Click to expand...
Click to collapse
Since your device is still s-on you need flash the boot.img manually.
Extract the boot.img from the rom, boot your device into fastboot and enter
Code:
fastboot flash boot boot.img
Flashing pacman into my friend's desire s , after unlocking it, i tried every recovery, formatting every partition manually, and flashing the boot.img using fast boot, but could not get beyond the white HTC screen. I wonder why it was being so... I own a one s, and have used multiple sense and aosp based ROMs on it without a hiccup (am s-on).
Any help would be really appreciated
Thanks a lot
Sent from my One S using xda premium
syed.shoaib said:
Flashing pacman into my friend's desire s , after unlocking it, i tried every recovery, formatting every partition manually, and flashing the boot.img using fast boot, but could not get beyond the white HTC screen. I wonder why it was being so... I own a one s, and have used multiple sense and aosp based ROMs on it without a hiccup (am s-on).
Any help would be really appreciated
Thanks a lot
Sent from my One S using xda premium
Click to expand...
Click to collapse
This might be the reason http://forum.xda-developers.com/showthread.php?t=1943524
[OFF-TOPIC] Non-Sony screen panel DS users lounge
"Happiness is good health and a bad memory."
- Ingrid Bergman (1917-1982)
WARNING*WARNING*WARNING
do this at your own risk! This is for s4 only!!
It has been brought to my attention that there might be a mid (model id) conflict
With flashing this and me along with others are trying to narrow down the issue. Thanks to @real187 for bring this to my attention.
I'm
S-off
Cid 11111111
MID PJ4011000
And had no problems flashing this firmware but others with same setup have reported soft brick.
OK I think @mkinney88 may have pin pointed where the soft brick may be coming from. If you s-off using facepalm, flash the firmware.zip and get soft bricked try this.
1. Get back to s-on (warning read directions several times before doing you CAN hard brick your phone) ~ http://forum.xda-developers.com/showthread.php?p=38267667
2. Get s-off with moonshine ~ http://forum.xda-developers.com/showthread.php?p=42613403
First off this is mostly ment for the T-Mobile branded phones but ill try and help all please let me know when asking questions if you have a T-Mobile or HTC branded phone (it has it right on the front of phone ).
I'm starting this thread to have a place for noobs and long time users to ask and answer questions. This is going to be as noob friendly as possible but please keep questions firmware related only. So lets get started.
i really dont know how to make it any clearer then @mkinney88 did in his rom OP. all credit goes to him these institutions.
By: Mkinney88 (UnKnown_ROMS)
--> Unlock your device
Step1. download and use this program to unlock your bootloader http://forum.xda-developers.com/show....php?t=1604677
Step2. SuperCID your phone so you can S-OFF and so you can also write the T-MOB010 CID if you are on a different carrier and want to run this ROM. You will need to be CID T-MOB010 if you want to run the firmware.zip Follow this to SuperCID http://forum.xda-developers.com/show...1#post26516911
Step3. After you have sucessfully unlocked your bootloader and SuperCID you can either S-OFF your phone or Not, it is up to you. I would recommend you achieve S-OFF so you can flash radios, kernels, and boot.img's. Follow this to achieve S-OFF http://forum.xda-developers.com/show....php?t=2155135
If everything went well you should be able to reboot into bootloader using the All In One Tool and in the top left your bootloader should say Unlocked, S-OFF, CID-1111111
--> Writing T-MOB010 CID
If you did everything right then your all set. Next you will want to run the fastboot command " fastboot oem writecid T-MOB010 " and reboot into bootloader again. Now in the top left it should say CID-T-MOB010. If you have made it this far you are doing great. Now we are going to run the firmware.zip package to ensure everything works without a problem.
--> Flashing the firmware.zip
Now if you are coming from STOCK OEM LOCKED T-MOBILE PHONE that already has Andorid 4.1.1 Jelly Bean on it then you do not need to do this step. You must be CID T-MOB010 to flash this or S-OFF CID 11111111 (I had no problem flashing firmware with s-off and Cid 11111111 but others have reported problems so if you don't want to chance it write your Cid to T-MOB010)
1. fastboot oem lock
2. fastboot erase cache
3. fastboot oem rebootRUU
4. fastboot flash zip firmware.zip, and you might get an error
5. fastboot flash zip firmware.zip again and it should pass and install a bunch of files should take about 2 minutes.
6. the phone does NOT reboot on its own so #7
7. fastboot reboot or fastboot reboot-bootloader
--> UNLOCKING BOOTLOADER AGAIN
Now we need to unlock the bootloader again so just do step 1 again but you will already have the Unlock_code.bin from the first time you unlocked you phone so no need to get another one from HTC but if for some funny reason it doesn't work you will need to just resubmit for a new one.
--> CUSTOM RECOVERY
After doing all the above steps you will need to install the custom recover. You will need to use TWRP 2.3.3 to insure no problems. Here is the link to download it http://techerrata.com/file/twrp2/vil....3.0-ville.img after you download it go to the DIR where you have the HTC One S All-In-One Toolkit v3.5 extracted. example: C:\Users\yourusername\Downloads\One_S_All-In-One_Kit_v3.5\One_S_All-In-One_Kit_v3.5\Data\Recoveries and in the Recoveries folder rename the downloaded twrp2.3.3.img to TWRPS4.img and replace the one that is in the folder and then proceed to install the recovery,
now youve followed that and now your stuck ether getting errors or phone is now acting all erratic? that's why you're here. go ahead ask any question you want about firmware noobish,dumb,anything as long as its firmware related. (sorry i cant tell you how to get the cute girl at the mall)
this is just a crude start ill add and refine as we get going.
please do don't ask firmware questions in development threads ask here.
If you want to see mkinney88's full guide go here paste bin
Downloads
FIRMWARE ZIP DOWNLOAD
https://drive.google.com/folderview?id=0B-BYnLh2sosKamRwaUJJS05oU3M&usp=sharing or http://db.tt/Wua8mDS2
Credit go's to mkinney88 for the firmware
Bricks
First off if you can get into bootloader then you don't have a hard brick.
If your phone is in the black screen of death there may be hope but we're still trying to figure that one out.
If your phone doesn't respond to any input from you (power, power+volume down) then congratulations you have a hard brick but don't through it in the junk drawer just yet, you can have it jtag repaired (they open phone plug into main board and flash everything)
Here's the link (you do have to pay for this)
http://forum.xda-developers.com/showthread.php?p=37136553
One more just in case
rc420head said:
I'm starting this thread to have a place for noobs and long time users to ask and answer questions. This is going to be as noob friendly as possible but please keep questions firmware related only. So lets get started.
i really dont know how to make it any clearer then @mkinney88 did in his rom OP. all credit goes to him these institutions.
By: Mkinney88 (UnKnown_ROMS)
--> Unlock your device
Step1. download and use this program to unlock your bootloader http://forum.xda-developers.com/show....php?t=1604677
Step2. SuperCID your phone so you can S-OFF and so you can also write the T-MOB010 CID if you are on a different carrier and want to run this ROM. You will need to be CID T-MOB010 if you want to run the firmware.zip Follow this to SuperCID http://forum.xda-developers.com/show...1#post26516911
Step3. After you have sucessfully unlocked your bootloader and SuperCID you can either S-OFF your phone or Not, it is up to you. I would recommend you achieve S-OFF so you can flash radios, kernels, and boot.img's. Follow this to achieve S-OFF http://forum.xda-developers.com/show....php?t=2155135
If everything went well you should be able to reboot into bootloader using the All In One Tool and in the top left your bootloader should say Unlocked, S-OFF, CID-1111111
--> Writing T-MOB010 CID
If you did everything right then your all set. Next you will want to run the fastboot command " fastboot oem writecid T-MOB010 " and reboot into bootloader again. Now in the top left it should say CID-T-MOB010. If you have made it this far you are doing great. Now we are going to run the firmware.zip package to ensure everything works without a problem.
--> Flashing the firmware.zip
Now if you are coming from STOCK OEM LOCKED T-MOBILE PHONE that already has Andorid 4.1.1 Jelly Bean on it then you do not need to do this step. You must be CID T-MOB010 to flash this or S-OFF CID 11111111
1. fastboot oem lock
2. fastboot erase cache
3. fastboot oem rebootRUU
4. fastboot flash zip firmware.zip, and you might get an error
5. fastboot flash zip firmware.zip again and it should pass and install a bunch of files should take about 2 minutes.
6. the phone does NOT reboot on its own so #7
7. fastboot reboot or fastboot reboot-bootloader
--> UNLOCKING BOOTLOADER AGAIN
Now we need to unlock the bootloader again so just do step 1 again but you will already have the Unlock_code.bin from the first time you unlocked you phone so no need to get another one from HTC but if for some funny reason it doesn't work you will need to just resubmit for a new one.
--> CUSTOM RECOVERY
After doing all the above steps you will need to install the custom recover. You will need to use TWRP 2.3.3 to insure no problems. Here is the link to download it http://techerrata.com/file/twrp2/vil....3.0-ville.img after you download it go to the DIR where you have the HTC One S All-In-One Toolkit v3.5 extracted. example: C:\Users\yourusername\Downloads\One_S_All-In-One_Kit_v3.5\One_S_All-In-One_Kit_v3.5\Data\Recoveries and in the Recoveries folder rename the downloaded twrp2.3.3.img to TWRPS4.img and replace the one that is in the folder and then proceed to install the recovery,
now youve followed that and now your stuck ether getting errors or phone is now acting all erratic? that's why you're here. go ahead ask any question you want about firmware noobish,dumb,anything as long as its firmware related. (sorry i cant tell you how to get the cute girl at the mall)
this is just a crude start ill add and refine as we get going.
please do don't ask firmware questions in development threads ask here.
If you want to see mkinney88's full guide go here paste bin
Click to expand...
Click to collapse
Don't flash the firmware on SuperCID which leads to brick, which can be recovered though
vatsaman said:
Don't flash the firmware on SuperCID which leads to brick, which can be recovered though
Click to expand...
Click to collapse
Bricks can't be recovered (unless you jtag) , you had a soft brick.
I had no problem doing this with s-off and Cid 11111111.
But I remember you from other threads and I have a few questions.
1. Is your phone t-mobile branded or htc? 2. When you first did the firmware update what was your hboot version?
-----------------------------------------
Friends don't let friends post without searching first!
I put a note of this in op just now, thanks for the warning, I'm trying to figure out why some can do this Cid 11111111 and some can't.
-----------------------------------------
Friends don't let friends post without searching first!
rc420head said:
Bricks can't be recovered (unless you jtag) , you had a soft brick.
I had no problem doing this with s-off and Cid 11111111.
But I remember you from other threads and I have a few questions.
1. Is your phone t-mobile branded or htc? 2. When you first did the firmware update what was your hboot version?
-----------------------------------------
Friends don't let friends post without searching first!
Click to expand...
Click to collapse
Yeah mine was a softbrick. If you stroll over, u can find many people in my queue. May be it is happening only for people who got S-OFF with the Facepalm way. I was on Hboot 1.14 and so a T Mob branded one.
Also you will see a warning in Facepalm thread that flashing firmware on SuperCID phones likey causes a brick.
vatsaman said:
Yeah mine was a softbrick. If you stroll over, u can find many people in my queue. May be it is happening only for people who got S-OFF with the Facepalm way. I was on Hboot 1.14 and so a T Mob branded one.
Also you will see a warning in Facepalm thread that flashing firmware on SuperCID phones likey causes a brick.
Click to expand...
Click to collapse
Something else is going on. I used facepalm, and Cid 11111111 to flash firmware twice now with no issues and started same as you hboot 1.14
-----------------------------------------
Friends don't let friends post without searching first!
thank you!
I'm on Stock JB 4.1.1 and my CID is BM___001, rooted, unlocked BL.
There is no RUU for this CID and only a JB OTA, The radio version and software version match with those of the phone.
my question is: Without S-OFF and SuperCID, Can I use the OTA.zip to be flashed for getting stock ROM? e.g if I am on CM 10.1 and I want to revert back to stock, can I use the OTA.zip?
khan.orak said:
I'm on Stock JB 4.1.1 and my CID is BM___001, rooted, unlocked BL.
There is no RUU for this CID and only a JB OTA, The radio version and software version match with those of the phone.
my question is: Without S-OFF and SuperCID, Can I use the OTA.zip to be flashed for getting stock ROM? e.g if I am on CM 10.1 and I want to revert back to stock, can I use the OTA.zip?
Click to expand...
Click to collapse
I'm not sure if I understand your question. So let me ask a few questions.
What hboot are you on?
What carrier are you using?
Are you wanting to try cm 10.1 and afraid for losing stock?
What is stock just HTC sense 4+ or is there carrier added stuff?
rc420head said:
I'm not sure if I understand your question. So let me ask a few questions.
Click to expand...
Click to collapse
ok I'll try to make it clearer.
What hboot are you on?
Click to expand...
Click to collapse
I'm on hboot 2.15.0000
What carrier are you using?
Click to expand...
Click to collapse
This phone is from Bell Mobility Canada, but I'm not using this carrier.
Are you wanting to try cm 10.1 and afraid for losing stock?
Click to expand...
Click to collapse
Exactly!! this is what I was asking. There isn't any RUU for stock JB 4.1.1, for the CID BM____001.
What is stock just HTC sense 4+ or is there carrier added stuff?
Click to expand...
Click to collapse
Stock sense is 4+ and is heavily bloated. It has got apps like DropBox, Let's Play Golf, Friend Stream, HTC Media Link HD, Polaris Office etc.
khan.orak said:
ok I'll try to make it clearer.
I'm on hboot 2.15.0000
This phone is from Bell Mobility Canada, but I'm not using this carrier.
Exactly!! this is what I was asking. There isn't any RUU for stock JB 4.1.1, for the CID BM____001.
Stock sense is 4+ and is heavily bloated. It has got apps like DropBox, Let's Play Golf, Friend Stream, HTC Media Link HD, Polaris Office etc.
Click to expand...
Click to collapse
OK since your on hboot 2.15 there's no need to upgrade firmware.
Since there is no RUU for stock the next best thing would to to make a back-up of stock using a custom recovery I would recommend twrp 2.3.3 (if you need help with this just ask that's what this thread is for)
Then I would copy the back up to your pc for safe keeping (you might even want to back it up on a cloud too I'd recommend goggle drive or Dropbox)
rc420head said:
OK since your on hboot 2.15 there's no need to upgrade firmware.
Since there is no RUU for stock the next best thing would to to make a back-up of stock using a custom recovery I would recommend twrp 2.3.3 (if you need help with this just ask that's what this thread is for)
Then I would copy the back up to your pc for safe keeping (you might even want to back it up on a cloud too I'd recommend goggle drive or Dropbox)
Click to expand...
Click to collapse
Thanks for the reply, really much appreciated.
I already have rooted the device and custom recovery TWRP 2.5. Though I am considering to downgrade it to 2.3.30. Now I made a backup of stock ROM. (System + Boot Partition)
So is this the only way I can get to stock?
I read somewhere that the following method could be used too(?)
S-OFF ---> Run an older RUU for Bell Mobility (probably ICS RUU) ---> Then update OTA.
Is this valid?
khan.orak said:
S-OFF ---> Run an older RUU for Bell Mobility (probably ICS RUU) ---> Then update OTA.
Is this valid?
Click to expand...
Click to collapse
Yes, if an older RUU is available for your CID just get S-OFF first then use it. Then you'll be able to update via OTA.
Sent from my HTC VLE_U using xda app-developers app
ardax said:
Yes, if an older RUU is available for your CID just get S-OFF first then use it. Then you'll be able to update via OTA.
Sent from my HTC VLE_U using xda app-developers app
Click to expand...
Click to collapse
Big thanks! :good:
vatsaman said:
Yeah mine was a softbrick. If you stroll over, u can find many people in my queue. May be it is happening only for people who got S-OFF with the Facepalm way. I was on Hboot 1.14 and so a T Mob branded one.
Also you will see a warning in Facepalm thread that flashing firmware on SuperCID phones likey causes a brick.
Click to expand...
Click to collapse
This is very interesting to me because I have a unbranded one s from a small spinoff of T-mo in Iowa. I got s-off with facepalm and SuperCID at the same time, then on hboot 1.13. Now recently I upgraded hboot to 2.15 with a euro RUU, soft bricked but was able to recover with only a firmware flash. (details are a bit fuzzy right now) I didn't relock the bootloader, but did install stock recovery. Ever after this stunt I've had tons of problems with radio disconnects. I first thought my problem was hardware, but I just got it back from a very good repair shop and the same thing. Although better on a different carrier, I suspect only because the better carrier has stronger signal. I'm ready to try a older RUU or euro firmware or just about anything, this phone only has service 10% of the time where it used to be 100% right now I'm running the latest Trickdroid 10.3.2 Changing the fast.dormancy=2 helped a tiny bit but it's something more fundamental than that I'm thinking... Sugg anyone??
Prolly should add I'm using the euro 1.15 radio. Thanks
Edit, looks like maybe my problems may only be build prop related, if I change to.til.radio.svn=19 to 5 I get an instant connection, but only G...
ro.ril.hsdpa.category=28
ro.ril.hsupa.category=7
ro.ril.fast.dormancy.rule=0
ro.ril.radio.svn=5
Sent from my HTC One S using xda app-developers app
ardax said:
Yes, if an older RUU is available for your CID just get S-OFF first then use it. Then you'll be able to update via OTA.
Sent from my HTC VLE_U using xda app-developers app
Click to expand...
Click to collapse
Yes this will also work (I was under the impression no ruu's were available)
khan.orak said:
Big thanks! :good:
Click to expand...
Click to collapse
forgiven90 said:
This is very interesting to me because I have a unbranded one s from a small spinoff of T-mo in Iowa. I got s-off with facepalm and SuperCID at the same time, then on hboot 1.13. Now recently I upgraded hboot to 2.15 with a euro RUU, soft bricked but was able to recover with only a firmware flash. (details are a bit fuzzy right now) I didn't relock the bootloader, but did install stock recovery. Ever after this stunt I've had tons of problems with radio disconnects. I first thought my problem was hardware, but I just got it back from a very good repair shop and the same thing. Although better on a different carrier, I suspect only because the better carrier has stronger signal. I'm ready to try a older RUU or euro firmware or just about anything, this phone only has service 10% of the time where it used to be 100% right now I'm running the latest Trickdroid 10.3.2 Changing the fast.dormancy=2 helped a tiny bit but it's something more fundamental than that I'm thinking... Sugg anyone??
Prolly should add I'm using the euro 1.15 radio. Thanks
Edit, looks like maybe my problems may only be build prop related, if I change to.til.radio.svn=19 to 5 I get an instant connection, but only G...
ro.ril.hsdpa.category=28
ro.ril.hsupa.category=7
ro.ril.fast.dormancy.rule=0
ro.ril.radio.svn=5
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
Yeah disabling the fast dormancy solved all my problems. :good:
Hi, i had a S4 which got a broken screen and costs too much to fix a the moment so i brought a Telstra HTC ONE XL off a friend for $100.
I do like the phone but was over the 4.2.1 software as used to the 4.3 on the S4 which i rooted and put on CM10.
I tried with this phone to put on the nightly cm 10.3 but i hit a problem ,when install the nightlies it boot loops and when i try install the stable 10.1 it fails with an error which i do belive is to do with my V2 hboot.
I downloaded the RRU which is supposted to update the hboot to v3 then i can install cm10.3 (aparently) but when i run the rru it fails saying not for my phone.
RUU_EVITA_UL_JB_45_S_Cingular_US_3.18.502.6_Radio_0.24p.32.09.06_10.130.32.34_release_signed_With_Partial
I have unlocked through htcdev and rooted it ok.
Im stuck now though as i pressed backup current original rom which turns out its not.
The phone details are
CID TELST001
Model: HTC ONE XL TELSTRA
If someone can tell where to either find the newest telstra rru for my phone or how to update my hboot so i can use cm10?
My phone is pretty useless at the moment
stueee said:
I downloaded the RRU which is supposted to update the hboot to v3 then i can install cm10.3 (aparently) but when i run the rru it fails saying not for my phone.
Click to expand...
Click to collapse
Where are you getting CM from (link it) and what is the file named? CM will typically have the phone's code name (EVITA) in the file name. If the code name ENDEAVORU is in the file name, it is in fact for the wrong device, as the ENDEAVORU is for the quad core Tegra3 (non-LTE) version, which is completely different hardware.
Also, I don't know if 10.3 is even released yet for our device, or for the ENDEAVORU for that matter. I think you might be confused about what you are flashing. So again, link what you are trying to install.
The reason you couldn't run that RUU is because the CID check wouldn't allow it, it's looking for an at&t CID which you don't have. Getting s-off disables the security check which would let you run any Evita RUU but you need to get a ROM to boot first before you try that. You also need SuperCID.
Your best bet is probably to flash an older Sense ROM (4.0 or 4.1), then you can at least boot, and get SuperCID and s-off so you can run the 3.18 RUU to meet the requirements for the latest cm ROMs.
Sent from my Evita
timmaaa said:
The reason you couldn't run that RUU is because the CID check wouldn't allow it, it's looking for an at&t CID which you don't have.
Click to expand...
Click to collapse
For some reason, I got confused and thought the OP was saying that the ROM install was failing. But it clearly says the RUU (or "rru" anyway) failed.
But yes, you can only run an RUU for your carrier version. So you will need s-off to run the AT&T RUU (the RUU referenced in the OP).
But still confused about the mention of CM10.3. From what I can see, it doesn't exist for either our EVITA, or the ENDEAVORU.
Maybe he meant cm10.2 and it was a typo?
Sent from my Evita
timmaaa said:
Maybe he meant cm10.2 and it was a typo?
Click to expand...
Click to collapse
Could be. Although if so, its a type that appears twice.
It seems fairly common for folks to try to install the wrong CM (wrong device). So I want to make sure the OP isn't doing that.
redpoint73 - the CM i downloaded and installed was from http://get.cm/?device=evita and i tried
cm-10.2-20131030-NIGHTLY-evita.zip which installed but bootloops
and then i tried the stable - cm-10.1.3-evita.zip which gave me the failed error.
stueee said:
redpoint73 - the CM i downloaded and installed was from http://get.cm/?device=evita and i tried
cm-10.2-20131030-NIGHTLY-evita.zip which installed but bootloops
and then i tried the stable - cm-10.1.3-evita.zip which gave me the failed error.
Click to expand...
Click to collapse
Okay, neither of those are CM10.3, as stated in your first post. Please post accurate information to prevent form confusing those that are trying to help.
What hboot are you currently on? Its listed on the bootloader screen.
What version of TWRP?
You should be able to mount SD in TWRP, put a Sense ROM on the phone, and get back up and running.
Hi Red,
Sorry i typed out that post at almost 1am after pulling my hair out over a few hours and got a little confused.
My hboot is 2.15 and twrp is 2.6.3.0 which I believe is the latest.
What sense rom would work on mine as i really need this working now as i cant find a rom to suit anywhere with my lesser expertees.
I tried changing the cid using the super cid Telstra bat file but it won't recognize the phone as its not loaded, i tried in off state, bootloader, fastboot and twrp but is just keeps saying cant find phone.
I also tried the hex editor method but it didnt seem to update the CID after i completed it without errors.
thanks for you help.
redpoint73 said:
Okay, neither of those are CM10.3, as stated in your first post. Please post accurate information to prevent form confusing those that are trying to help.
What hboot are you currently on? Its listed on the bootloader screen.
What version of TWRP?
You should be able to mount SD in TWRP, put a Sense ROM on the phone, and get back up and running.
Click to expand...
Click to collapse
With 2.15 hboot, you cannot modify the files required for supercid.
You can try the ever so risky jet tool. But this tool deliberately bricks to downgrade your hboot.
Sent from my HTC One XL using xda app-developers app
Any recent Sense ROM will suit your current setup, have a look here and you'll find a whole bunch. Unfortunately for you the 2.15 hboot has write protection enabled so there's no way you can get SuperCID (abd therefore can't get s-off), at least not until an exploit is released.
When you tried to flash CM did you also flash the boot.img via fastboot afterwards? You're s-on so that's necessary to get it to boot. Phones on a higher hboot like yours are unable to flash the boot.img through recovery so it must be done manually.
All you do is retrieve the boot.img from the root of the ROM zip, put it in your fastboot folder on your PC, and after you've flashed the ROM in recovery you reboot to bootloader, connect the phone to the PC, open a command prompt from within your fastboot folder (shift + right click anywhere in the folder then select open command prompt here), then give the following command:
fastboot flash boot boot.img
Once that's done you can reboot the phone and it should boot into the ROM.
Sent from my Evita
stueee said:
My hboot is 2.15
Click to expand...
Click to collapse
That's pretty important. This is the reason why the older CM10.1 failed to install. CM was having issues with older hboots, so a script was added to require hboot 2.14.
Once hboot 2.15 came along, folks found that CM failed to install since the install script explicitly requires 2.14. Later versions include hboot 2.15 in the install script.
As exad and timmaaa mention, SuperCID (and therefore s-off) are not possible on hboot 2.15. So you are stuck with s-on (assuming that is what you are on now). It also means you can't currently run any RUU. Reason being, with s-on you can't run older RUUs, RUUs from another carrier, and there are no RUUs based on hboot 2.15. No "current" RUU exists (for your hboot), you can't run "previous" RUUs with the S-on restriction. So therefore you can't currently run any RUU.
But hboot 2.15 will work with newer versions of CM (and other AOSP ROMs which have been recently updated) as well as any Sense ROMs. But with s-on, you need to extract boot.img and flash manually with fastboot every time you install a ROM (as timmaaa points out). If you did not do this, this is why flashing the recent CM10.2 nightly resulted in a bootloop. Failure to falsh boot.img is the most common reason for bootloop after flashing a ROM.
stuck in bootloop
ive recently have been flashing different roms onto my htc one with no problem..then i decided to try the google play edition and realised i had to be s-off...now i have super cid 11111111 and s-off and was running skydagon 14.1 with no prob...today i did a nand backup and thought i would try the liquid rom then half way through the fresh install (i wiped cache and dalvik first)my phone shut down and boots up into a loop..if i go to recovery (twrp 2.6.3.3) it only stays in recovery a few seconds then goes back to the start of bootloop...i have tried cwmr also...i have otg cable and have used adb a few times however im not highly skilled so any help would be appreciated...apologies on the excessive post..
martin-m7 said:
ive recently have been flashing different roms onto my htc one with no problem..then i decided to try the google play edition and realised i had to be s-off...now i have super cid 11111111 and s-off and was running skydagon 14.1 with no prob...today i did a nand backup and thought i would try the liquid rom then half way through the fresh install (i wiped cache and dalvik first)my phone shut down and boots up into a loop..if i go to recovery (twrp 2.6.3.3) it only stays in recovery a few seconds then goes back to the start of bootloop...i have tried cwmr also...i have otg cable and have used adb a few times however im not highly skilled so any help would be appreciated...apologies on the excessive post..
Click to expand...
Click to collapse
You're in the wrong forum, buddy. This is the HTC One XL forum.