Database Info

Rom Upgrade Help Required

Hello All,
I need your help regarding upgrade my captivate which is running on 2.1. I had hard bricked it once before when I was trying to update it via odin. Just got fixed it back from mobiletechvideos.com. Now I want to upgrade it to gingerbread Can anyone tell me any stable rom which I can upgrade safely and have 0% chance to hard bricked it again. Or any rom which I can flash via any other tool not via odin as I thought last bricked was caused due to odin. Pls help me.
I like the MIUI rom but I saw that it use ODIN so I am a bit afread to try it
Thanks

My understanding of the process.
I'm fairly sure you need to use superoneclick to root, that's step one. Next go to market and dowload ROM manager and install it, that's step two.Step three, flash clockworkmod recovery with ROM manager. Choose captivateMTD and let it flash. Step four, now go to the download ROM and choose an MTD ROM. I reccomend cyanogenmod as its aosp, overclocked and generally awesome. They have a stable build that's a great dd. Step five is to flash it. When the download completes it will promt you to wipe data and cache, clear everything and hit go. Step six would be to dl and flash gapps with ROM manager. Wipe cache and install. After all this you should be on cm7 stable. Pm me if you need help. I have the drivers and all files you could possibly need in my dropbox account.
Good luck and enjoy cyanogenmod.
Sent from my PG86100 using Tapatalk

where I can get superoneclick to root it ?

imk79 said:
where I can get superoneclick to root it ?
Click to expand...
Click to collapse
please, for the love all that is holy, leave your phone alone if you dont know how to use GOOGLE
http://bit.ly/uoGYG7

I tried to download superoneclick via this link:
http://forum.xda-developers.com/showthread.php?t=803682
All archive showing me damaged only 8 mb version is working but when I tried to root it via that version it shows me FAILED msg at the end. Any help in this regard ?

You do not need to root your phone to install a custom rom.
If you currently are on 2.1, boot into recovery and flash this zip file.
From here you can go about installing a gingerbread kernel and rom.
If you are unsure of the process, please do lots more research before you go flashing anything. If you brick again it's not my fault.

mikedavis120 said:
My understanding of the process.
I'm fairly sure you need to use superoneclick to root, that's step one. Next go to market and dowload ROM manager and install it, that's step two.Step three, flash clockworkmod recovery with ROM manager. Choose captivateMTD and let it flash. Step four, now go to the download ROM and choose an MTD ROM. I reccomend cyanogenmod as its aosp, overclocked and generally awesome. They have a stable build that's a great dd. Step five is to flash it. When the download completes it will promt you to wipe data and cache, clear everything and hit go. Step six would be to dl and flash gapps with ROM manager. Wipe cache and install. After all this you should be on cm7 stable. Pm me if you need help. I have the drivers and all files you could possibly need in my dropbox account.
Good luck and enjoy cyanogenmod.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Step One: Root Done
Step Two: ROM manager installation Done
Step Three: flash clockworkmod recovery with ROM manager (When I clicked on it asked me that confirm phone model and when I clicked on samsung captivate MDT it said that clockworkmod not officially supported the captivate MDT and have you installed clockworkmod based recovery manually if I clicked on yes it proceed to the next screen and if I clicked no it said that without it rom manager will not work. If i clicked on yes it proceed to the next screen and asked me the clockworkmod version 2.x or 3.x. I select one of them and click on the install rom from SD card and then browse to my downloaded rom when I clicked on rom and it will ask me to backup exsisiting rom, wipe data and cache and wipe dalvik cache. I had selected last 2 options and clicked ok then it asked me to press ok to reboot into clockworkMod Recovery and continue the installation when I clicked ok and rebooted where it showing me 4 options: rebbot system now, reinstall packages, delete all user data and delete cache data. After that I don't know what to do BTW I downloaded MIUI rom as I wana try it )
Any Help ?

Its sounds like you are in the stock recovery still. When you get to the screen with four options click reinstall packages and it should take you to clockwork recovery. The you will have many more options. You will want to go to install zip from SD card then choose zip from SD card and then navigate to your rom of choice and click it. Then it will go through the install process and when it is done hit reboot now and you should be running your custom rom.
Sent from my I897 using XDA App

bradleyG said:
Its sounds like you are in the stock recovery still. When you get to the screen with four options click reinstall packages and it should take you to clockwork recovery. The you will have many more options. You will want to go to install zip from SD card then choose zip from SD card and then navigate to your rom of choice and click it. Then it will go through the install process and when it is done hit reboot now and you should be running your custom rom.
Sent from my I897 using XDA App
Click to expand...
Click to collapse
Ok here come the problem again. I install the update.zip from sd card and the phone took me into the clockworkmod recovery a new menu then I install update.zip and after that I click install a zip from SD card. I clicked on it and browse it to the downloaded rom and it asked me to perform the action and I clicked ok after that it shows the installing process again and from after that phone is showing AT&T logo then Cyanogen Mod logo and then showing it is installing something and then restarting again and again. Phone is in the same state and doing this thing again and again. I remove the battery and power on again and its doing same thing any help ?

Get into cwm again via buttons and flash cm7 one more time. Should fix the error you're seeing.

ok I am able to fix it. I removed the SIM card and SD CARD and it will come to the update process and when done its boot to the rom and finally I am in new MIUI look and feel Thanks guys for your help. I will try this rom for few days but can any one pls tell me any proper guide where I can find a proper guide and information that how to update a rom and how to fix a problems if faced during the installation process.

imk79 said:
but can any one pls tell me any proper guide where I can find a proper guide and information that how to update a rom and how to fix a problems if faced during the installation process.
Click to expand...
Click to collapse
dude. this website is all the info you freakin need

imk79 said:
ok I am able to fix it. I removed the SIM card and SD CARD and it will come to the update process and when done its boot to the rom and finally I am in new MIUI look and feel Thanks guys for your help. I will try this rom for few days but can any one pls tell me any proper guide where I can find a proper guide and information that how to update a rom and how to fix a problems if faced during the installation process.
Click to expand...
Click to collapse
The thanks button is there for a reason. Haha just messing with you but if you feel like saying thanks to someone feel free to press the button that's what it's there for.

Pirateghost said:
dude. this website is all the info you freakin need
Click to expand...
Click to collapse
Yeah I know that this for the XDA all about but every time I got help is via starting a topic. Being a beginner I want to have a guide where all problems should listed click if the phone is not going cwm how can you fix it so it would be guide. I got help everytime from XDA when I searched but very distributed. And if you search on google you will got alot info in which you are not sure about which is correct for you. Anyways Thanks alot guys.

[Q] a little help

ive been rooted for a long time now, i have a Moto Attrix 2. recently i did the updated to the 2.3.6 but before i did, i went ahead and did the perminent root method. this helped me keep root. now i want to jump into Roms. i'm not new to this. i had a Droid X proir to the Attrix. so i kinda know my way around. sorta..aha, ive read the process of the rom i want to install on to my phone which is supercharge Rom

So do you have a question, I couldn't tell from your post

awe man, i'm sorry about that.
my question...actually the question is about the process needed to be taken. i read thru the steps to flash supercharge rom V5 but, i have no clue to where start from since i have not flash a rom on this device.? so i'm startin off from scretch i'm sorry about that, i shoulda proof read that..lol, before i posted.

Step 1)Install CW recovery from this link http://forum.xda-developers.com/showthread.php?t=1346977
Step 2) Run it and reboot into recovery
Step 3) MAKE A BACKUP! I repeat MAKE A BACKUP! this is important in case something goes wrong while flashing a new rom you can flash your backup and return your phone to normal.
Once you have learned to do that you can now start flashing roms. Just download the roms and follow the directions in the roms. ALL ROMS REQUIRE CW Recovery to install so you'll get used to it. I just wanted u to follow those 3 steps before you start flashing roms. People forget to make backups and they end up losing all their info.
Read the BEGINNERS GUIDE it has all the info you could ever need.

eL_MeXiCaNo said:
Step 1)Install CW recovery from this link http://forum.xda-developers.com/showthread.php?t=1346977
Step 2) Run it and reboot into recovery
Step 3) MAKE A BACKUP! I repeat MAKE A BACKUP! this is important in case something goes wrong while flashing a new rom you can flash your backup and return your phone to normal.
Once you have learned to do that you can now start flashing roms. Just download the roms and follow the directions in the roms. ALL ROMS REQUIRE CW Recovery to install so you'll get used to it. I just wanted u to follow those 3 steps before you start flashing roms. People forget to make backups and they end up losing all their info.
Read the BEGINNERS GUIDE it has all the info you could ever need.
Click to expand...
Click to collapse
thanks bro, i got that part down, ive been rollin around with a back up for weeks now ..
oh yea and the other thing, when i went and did the forever root before the OTA update, the one thing that didn't update was the baseband.

Droid_Boi86 said:
thanks bro, i got that part down, ive been rollin around with a back up for weeks now ..
oh yea and the other thing, when i went and did the forever root before the OTA update, the one thing that didn't update was the baseband.
Click to expand...
Click to collapse
Dont worry about ever doing the forever root there's a root method for 2.3.6
Before flashing any rom I suggest you flash the 2.3.5 FXZ and update to 2.3.6 and then root it. This way you start from a fresh base and don't have any random bugs that would take a long time to hunt down and fix due to coming from a non-stock rom.

Ask away. What questions do you have? I recommend installing CWM on Recovery zip (and download the remove script while your at it you might want that). Revoke root rights to Bootstrap after installing the on boot zip. It takes one cycled reboot for the script to take effect. Make sure it works before installing any ROMs. Read the Read Me file for supercharged before installing. That's a few tips from me. Oh, if you have a windows based PC install and know how to use RSD lite and the fxz file in case of a disaster. In other words incase you can't recover from some unforeseen event using your phone and CWM Recovery alone. Make sure your battery is fully charged before installing a new ROM. Off the top of my head those tips come to mind.
Sent from my MB865 using XDA

KEB64 said:
Ask away. What questions do you have? I recommend installing CWM on Recovery zip (and download the remove script while your at it you might want that). Revoke root rights to Bootstrap after installing the on boot zip. It takes one cycled reboot for the script to take effect. Make sure it works before installing any ROMs. Read the Read Me file for supercharged before installing. That's a few tips from me. Oh, if you have a windows based PC install and know how to use RSD lite and the fxz file in case of a disaster. In other words incase you can't recover from some unforeseen event using your phone and CWM Recovery alone. Make sure your battery is fully charged before installing a new ROM. Off the top of my head those tips come to mind.
Sent from my MB865 using XDA
Click to expand...
Click to collapse
whats the reason for denying bootstrap su? ive seen this before and im a 3year android user/flasher and ive yet to deny my bootstrap su after installing anything. so, just wondering why.

rob219 said:
whats the reason for denying bootstrap su? ive seen this before and im a 3year android user/flasher and ive yet to deny my bootstrap su after installing anything. so, just wondering why.
Click to expand...
Click to collapse
Because if you dont deny bootstrap SU after FLASHING CWM ON STARTUP zip then you will not get CWM everytime you boot up, it's a bug. So if you want CWM everytime you boot your phone you have to deny bootstrap SU. Other than that IDK the exact technical details on why it does this, it just does.

KEB64 said:
Ask away. What questions do you have? I recommend installing CWM on Recovery zip (and download the remove script while your at it you might want that). Revoke root rights to Bootstrap after installing the on boot zip. It takes one cycled reboot for the script to take effect. Make sure it works before installing any ROMs. Read the Read Me file for supercharged before installing. That's a few tips from me. Oh, if you have a windows based PC install and know how to use RSD lite and the fxz file in case of a disaster. In other words incase you can't recover from some unforeseen event using your phone and CWM Recovery alone. Make sure your battery is fully charged before installing a new ROM. Off the top of my head those tips come to mind.
Sent from my MB865 using XDA
Click to expand...
Click to collapse
thanks alot man, as far as the RSD lite goes i kno my way aroung that. so i should be good. but as for the first thing you suggested. about the CVM on Recovery Zip? i wanna learn how to do that, meaning install CVM properly. if you could explain or shot me a link to where i read up on it.

Droid_Boi86 said:
thanks alot man, as far as the RSD lite goes i kno my way aroung that. so i should be good. but as for the first thing you suggested. about the CVM on Recovery Zip? i wanna learn how to do that, meaning install CVM properly. if you could explain or shot me a link to where i read up on it.
Click to expand...
Click to collapse
Sorry KEB - not to step on your toes or anything, but...
Get and install the A2 Bootstrap from here.
You can now boot into "Recovery" mode through the Bootstrap app. You can test it first or you can just go and get the CWM on Boot zip files here. Download the two zip attachments in the first post to your sdcard.
Then open the A2 Bootstapper app - click the top button, then ok, then the 2nd button.. and viola! It will boot into recovery.
Then wipe your cache partition, and dalvik cache, and install zip from sdcard. "...Global..." zip makes it boot into recovery every time you reboot, and the "..Remove.." zip removes it.
Good luck. Happy reading!

alteredlikeness said:
Sorry KEB - not to step on your toes or anything, but...
Get the A2 Bootstrap from here.
Get ROM Manager from the Google Play Store.
Install both.
You can now boot into "Recovery" mode through the Bootstrap app. You can test it first or you can just go and get the CWM on Boot zip files here. Download the two zip attachments in the first post to your sdcard.
Then open the A2 Bootstapper app - click the top button, then ok, then the 2nd button.. and viola! It will boot into recovery.
Then wipe your cache partition, and dalvik cache, and install zip from sdcard. "...Global..." zip makes it boot into recovery every time you reboot, and the "..Remove.." zip removes it.
Good luck. Happy reading!
Click to expand...
Click to collapse
thanks for that good explaination on that. now i gotta figure out why my laptop isn't seeing my phone...=/

Droid_Boi86 said:
thanks for that good explaination on that. now i gotta figure out why my laptop isn't seeing my phone...=/
Click to expand...
Click to collapse
Make sure you have the drivers downloaded for the Atrix 2.

thethird84 said:
Make sure you have the drivers downloaded for the Atrix 2.
Click to expand...
Click to collapse
By "seeing your phone," do you mean ADB-wise? Settings -> Applications -> Development -> USB Debugging (enable)

PM me if you need any help. I have Supercharged V5 update 2 running and I love it. there are some things you need to do to make sure it works right though.

thanks alot! i will do..

[Q] Help Flashing ROM

Thanks for your help and time in advance. I am trying to flash a ROM to my At&T HTC One X. It is HBOOT 1.14 running ics 2.20. I am specifically trying to flash ViperXL and have failed about 3 times so far. I keep getting my phone stuck in a boot loop. It is no longer in a boot loop because I have flashed the factory ROM. My phone is rooted and I have TWRP as my recovery. I have some specific questions to ask:
1) What version of ViperXL should I use? I think I might be trying to flash the wrong version.
2) Do I leave the entire file zipped when I put it on my sd card or do I specifically extract the boot.img file and keep that file separate from the zip file?
3) If I have Flash Image GUI from the playstore should I use that to flash it? If so do I still follow step 2 above?
This is what I have been doing so far:
1) Downloading this file: ViperXL 3.2.1 - Android File Host (685MB) from http://forum.xda-developers.com/showthread.php?t=1868236
2) Using WInRar to extract its contents and move it to my sd card.
3) Using Flash Image GUI to select boot.img and then pressing flash.
4) Rebooting my phone and then wa-la, boot loop. I have actually been following a youtube video on how to do it but I'm not getting no luck.
If there is an easier way please inform me. I am a noob but love this stuff. Please be specific with instructions so I can enjoy an awesome custom ROM.
Again, thank you for your time and have a great day.

dirty2k9 said:
Thanks for your help and time in advance. I am trying to flash a ROM to my At&T HTC One X. It is HBOOT 1.14 running ics 2.20. I am specifically trying to flash ViperXL and have failed about 3 times so far. I keep getting my phone stuck in a boot loop. It is no longer in a boot loop because I have flashed the factory ROM. My phone is rooted and I have TWRP as my recovery. I have some specific questions to ask:
1) What version of ViperXL should I use? I think I might be trying to flash the wrong version.
2) Do I leave the entire file zipped when I put it on my sd card or do I specifically extract the boot.img file and keep that file separate from the zip file?
3) If I have Flash Image GUI from the playstore should I use that to flash it? If so do I still follow step 2 above?
This is what I have been doing so far:
1) Downloading this file: ViperXL 3.2.1 - Android File Host (685MB) from http://forum.xda-developers.com/showthread.php?t=1868236
2) Using WInRar to extract its contents and move it to my sd card.
3) Using Flash Image GUI to select boot.img and then pressing flash.
4) Rebooting my phone and then wa-la, boot loop. I have actually been following a youtube video on how to do it but I'm not getting no luck.
If there is an easier way please inform me. I am a noob but love this stuff. Please be specific with instructions so I can enjoy an awesome custom ROM.
Again, thank you for your time and have a great day.
Click to expand...
Click to collapse
wipe cache dalvik system and factory reset in recovery
fastboot flash boot boot.img or use the gui to flash the boot.img extracted from the viper rom
install the viper rom within recovery.
read more before you end up with a brick.
it says all this right in the second post of the viper thread
"Download the ViperXL 3.0.0 from the download section
Confirm the md5 checksum is correct on both files (it will be noted on the dl page)
Place the file somewhere on your phone storage
Reboot to TWRP recovery
Backup current ROM
Install ROM using twrp and select wipe during aroma install if coming from another base
If you have 1.14 hboot you will need to flash the boot.img in fastboot. You will need to extract this from the ROM zip. I have found the following tool useful: [TOOL] HTC Auto Boot.img Installer (One Click Tool)
Reboot and Enjoy"

All Flash Image GUI does is flash the boot.img, which is a small part of the overall ROM. You also need to have the entire ROM zip on your SD card. Boot into bootloader, then go into TWRP recovery. Once in TWRP, go to Wipe, do a factory reset (do not factory reset in bootloader, as it will corrupt your SD memory), wipe Dalvik, wipe cache. Then select Install, and navigate to the ROM zip. The ROM will begin to install. AROMA will then launch, giving you a variety of install options specific to ViperXL. Go through the AROMA options. Then when the ROM install is complete, TWRP will give you the option to reboot. Reboot and enjoy.

Do not extract rom lol. Flash it as is!
Sent from my One X using Tapatalk 2

flash successful
Thank you everyone for your replies. I got the ROM flashed and it's working great.

redpoint73 said:
(do not factory reset in bootloader, as it will corrupt your SD memory
Click to expand...
Click to collapse
Wow how did you figure this out? I now know why my sd corrupted on me once. I did click that once in my life. In fact it put me i have the "soft brick and gonna cry" category, complete with post in q&a.
There needs to be a sticky for things like this.. Little nuggets of knowledge.
The sticky should also contain the factory recovery.
And then the sticky should be mandatory before you are allowed to download roms, recoveries, etc. It would save headache for many.

wdkingery said:
Wow how did you figure this out? I now know why my sd corrupted on me once. I did click that once in my life. In fact it put me i have the "soft brick and gonna cry" category, complete with post in q&a.
There needs to be a sticky for things like this.. Little nuggets of knowledge.
The sticky should also contain the factory recovery.
And then the sticky should be mandatory before you are allowed to download roms, recoveries, etc. It would save headache for many.
Click to expand...
Click to collapse
Agreed. I too fall into the category of accidently bootloader factory resetting and almost dieing lol

it has been stated not to factory reset in bootloader, i have posted it probably almost 100 times. i'm glad this thread is finally over it was making me itch and twitch.

wdkingery said:
Wow how did you figure this out? I now know why my sd corrupted on me once.
Click to expand...
Click to collapse
Its a fairly common mistake, and as DvineLord stated, it been discussed quite a bit in various places.

P5113 root, recovery, rom questions

Hello community,
I was given the device last year and had been fairly satisfied with the performance of it. However, it has gotten laggy over the past couple weeks and a friend suggested to root and flash a rom on it. So, without any prior knowledge, I have been doing some research and browsing through the threads on this forum. I can see that there are guides but was very unsure if the methods would still work because I have noticed that most of them were last updated/edit a while ago. I know I shouldn't use the word 'latest' for doing this to a tablet that is fairly old in the market. However, it would be very helpful if someone can point me to some 'proven to work' or 'trust-worthy' guides of rooting, flashing recovery, and rom.
Also, just out of curiosity, please recommend which recovery and rom a first-timer should use if possible

try these roms.
rocketfans14 said:
Hello community,
I was given the device last year and had been fairly satisfied with the performance of it. However, it has gotten laggy over the past couple weeks and a friend suggested to root and flash a rom on it. So, without any prior knowledge, I have been doing some research and browsing through the threads on this forum. I can see that there are guides but was very unsure if the methods would still work because I have noticed that most of them were last updated/edit a while ago. I know I shouldn't use the word 'latest' for doing this to a tablet that is fairly old in the market. However, it would be very helpful if someone can point me to some 'proven to work' or 'trust-worthy' guides of rooting, flashing recovery, and rom.
Also, just out of curiosity, please recommend which recovery and rom a first-timer should use if possible
Click to expand...
Click to collapse
hello ,
these are the things you need to do before flashing a ROM.
note: -the following things may void your warranty.
-do this on your own risk.
1. HOW TO ROOT
-First install kingo root on your windows PC. Then check USB debugging .
( settings. < about device < touch build number 7times < go back and select developer options < check USB debugging.)
-Open kingo root on the PC and connect your device and connect your device to the PC. Start root and do not remove the USB cable until it says finish.
-Now you have successfully rooted your device.
2.HOW TO INSTALL A CUSTOM RECOVERY
- Go to the following link and download CLOCK WORK MOD(CWM)
LINK: https://www.clockworkmod.com/rommanager
Select your device and install the recovery.
go into the app and install recovery .
3.BACK UP
download rom manager from playstore and do a backup( do a backup using this ap only if you are using CWM recovery.
link for ROM manager: https://play.google.com/store/apps/d...mmanager&hl=en
Now the first thing you need to do is download this rom.
https://www.androidfilehost.com/?fid=95916177934533333
(note: you can flash the rom of p5110 for p5113)
now to flash the rom follow the following steps.
1. Go to recovery mode
2. (have the rom in your sd card)flash it there .
use this link to know how to flash a rom.
https://www.youtube.com/watch?v=tJfPwWjnWGY
now you can reboot after flashing.
to get inbuilt google apps and play store you need to install something called GAPPS (Google apps) download from this link.
http://opengapps.org/?api=5.1&variant=nano
now you flash this zip the same way you flashed the rom.
any problems plz notoce me.

Zte blade l said:
hello ,
these are the things you need to do before flashing a ROM.
note: -the following things may void your warranty.
-do this on your own risk.
1. HOW TO ROOT
-First install kingo root on your windows PC. Then check USB debugging .
( settings. < about device < touch build number 7times < go back and select developer options < check USB debugging.)
-Open kingo root on the PC and connect your device and connect your device to the PC. Start root and do not remove the USB cable until it says finish.
-Now you have successfully rooted your device.
2.HOW TO INSTALL A CUSTOM RECOVERY
- Go to the following link and download CLOCK WORK MOD(CWM)
LINK: https://www.clockworkmod.com/rommanager
Select your device and install the recovery.
go into the app and install recovery .
3.BACK UP
download rom manager from playstore and do a backup( do a backup using this ap only if you are using CWM recovery.
link for ROM manager: https://play.google.com/store/apps/d...mmanager&hl=en
Now the first thing you need to do is download this rom.
https://www.androidfilehost.com/?fid=95916177934533333
(note: you can flash the rom of p5110 for p5113)
now to flash the rom follow the following steps.
1. Go to recovery mode
2. (have the rom in your sd card)flash it there .
use this link to know how to flash a rom.
https://www.youtube.com/watch?v=tJfPwWjnWGY
now you can reboot after flashing.
to get inbuilt google apps and play store you need to install something called GAPPS (Google apps) download from this link.
http://opengapps.org/?api=5.1&variant=nano
now you flash this zip the same way you flashed the rom.
any problems plz notoce me.
Click to expand...
Click to collapse
I was looking in the forum and someone said that I would also need to unlock the bootloader? If so, how do I do that?
Also, is there a difference between kingroot and towelroot? I saw a post in the forum here saying towelroot is fast and easy to root the tablet.

Not much difference.
Actually there is not much difference between kings root and towel root....towel root doesn't need a PC...but I have never used it so I can't assure you that it is safe.
And coming to the boot loader I don't know much about it but I didn't do anything like that before flashing a rom or rooting my tab2....
If you want further assistance about the boot loader I can help you with that..

rocketfans14 said:
I was looking in the forum and someone said that I would also need to unlock the bootloader? If so, how do I do that?
Also, is there a difference between kingroot and towelroot? I saw a post in the forum here saying towelroot is fast and easy to root the tablet.
Click to expand...
Click to collapse
it is not necessary to unloack bootloader for tab 2 as it comes with a unlocked bootloader from stock.

Zte blade l said:
Actually there is not much difference between kings root and towel root....towel root doesn't need a PC...but I have never used it so I can't assure you that it is safe.
And coming to the boot loader I don't know much about it but I didn't do anything like that before flashing a rom or rooting my tab2....
If you want further assistance about the boot loader I can help you with that..
Click to expand...
Click to collapse
Hey, it's been a while. Honestly speaking, when I first posted this thread, I didn't really have enough time to do the things so now I am finally back and trying to do it. So far, I know what recovery and rom I'm going to use with all the files downloaded and ready. Though, currently, I am still at the pre-root stage. I have read up things about kingoroot and not sure if I wanted to use it. So I looked around on the forum and wonder if Odin is still a working solution. Reading on the steps and guides, I was wondering if I need to have Kies installed?

rocketfans14 said:
Hey, it's been a while. Honestly speaking, when I first posted this thread, I didn't really have enough time to do the things so now I am finally back and trying to do it. So far, I know what recovery and rom I'm going to use with all the files downloaded and ready. Though, currently, I am still at the pre-root stage. I have read up things about kingoroot and not sure if I wanted to use it. So I looked around on the forum and wonder if Odin is still a working solution. Reading on the steps and guides, I was wondering if I need to have Kies installed?
Click to expand...
Click to collapse
Kies is not needed as it never helped.
You can depend on odin it is your only saviour when you are in trouble.
I think rooting with kingroot is easy as it is just connecting to your PC and cick the start button.
So just notice me when your ready.
And there is also one good news...?
Tab 2 has got marshmallow.

Zte blade l said:
Kies is not needed as it never helped.
You can depend on odin it is your only saviour when you are in trouble.
I think rooting with kingroot is easy as it is just connecting to your PC and cick the start button.
So just notice me when your ready.
And there is also one good news...��
Tab 2 has got marshmallow.
Click to expand...
Click to collapse
I have rooted the tablet. I did it with odin and twrp with flashing the updatedSuperSU zip folder.
I have tried flashing the CM12.1 rom yesterday but resulted in a boot loop. So for now, I'm just rooted and on stock rom until I or someone can find out what was the problem. I have read about the discussion with marshmallow but it seems to me that the project isn't really stable yet. From what I have researched lately, can I assume there's issue with the p51xx line of tablets? Because I saw many people having problems with p51xx and most people with the other tablets aren't having any.

rocketfans14 said:
I have rooted the tablet. I did it with odin and twrp with flashing the updatedSuperSU zip folder.
I have tried flashing the CM12.1 rom yesterday but resulted in a boot loop. So for now, I'm just rooted and on stock rom until I or someone can find out what was the problem. I have read about the discussion with marshmallow but it seems to me that the project isn't really stable yet. From what I have researched lately, can I assume there's issue with the p51xx line of tablets? Because I saw many people having problems with p51xx and most people with the other tablets aren't having any.
Click to expand...
Click to collapse
You first must update your tab to jelly bean bootloader, before trying out newer roms.
Or perhaps flash stock jb firmware with odin
Whatever you choose, both is ok.
http://forum.xda-developers.com/showthread.php?t=2642005
Read here
The first thing you do, is take a nandroid backup, it's very important at every step, unless you are really ready to risk. It's better to have it.
Next Read through the rom threads, clear your mind and your tab too. You must format data.
Stay on twrp 2.8.7.2. Don't go to the latest one yet.
Flash rom, wait, it will boot up.
Every tab behave differently with every rom, sure you are going to face soft reboots, on some roms it will be a lot, on some it will be less. I would suggest you try both LP and kk first.
Remember, it's better to keep this tab updated than to stay on stock. This tab 2 series has a emmc bug and staying on stock or jumping back is a risk too. I have been on kk and lp. They both have kept this tab running great and away from that bug.

billysam said:
You first must update your tab to jelly bean bootloader, before trying out newer roms.
Or perhaps flash stock jb firmware with odin
Whatever you choose, both is ok.
http://forum.xda-developers.com/showthread.php?t=2642005
Read here
The first thing you do, is take a nandroid backup, it's very important at every step, unless you are really ready to risk. It's better to have it.
Next Read through the rom threads, clear your mind and your tab too. You must format data.
Stay on twrp 2.8.7.2. Don't go to the latest one yet.
Flash rom, wait, it will boot up.
Every tab behave differently with every rom, sure you are going to face soft reboots, on some roms it will be a lot, on some it will be less. I would suggest you try both LP and kk first.
Remember, it's better to keep this tab updated than to stay on stock. This tab 2 series has a emmc bug and staying on stock or jumping back is a risk too. I have been on kk and lp. They both have kept this tab running great and away from that bug.
Click to expand...
Click to collapse
Do I have to unroot first? Do you have a link to making a nandroid backup?
Edit: Oh, I looked at the link you included and it said that if I am on stock jb (4.2.2), I can skip the update bootloader part..

When you flashed the new rom, did you do a factory reset (wipe data)?
Sent from my SAMSUNG-SM-G870A using XDA Free mobile app

rocketfans14 said:
Do I have to unroot first? Do you have a link to making a nandroid backup?
Edit: Oh, I looked at the link you included and it said that if I am on stock jb (4.2.2), I can skip the update bootloader part..
Click to expand...
Click to collapse
Yes, that's what I meant too, if you're on jb already, you are fine. You don't have to unroot. For making a nandroid backup, use twrp recovery, there is an option for backup, select and backup all from there, if you get into bootloop or any other problem, as long as you can get back to recovery, you can restore from there. Most rom comes pre rooted.

rocketfans14 said:
I have rooted the tablet. I did it with odin and twrp with flashing the updatedSuperSU zip folder.
I have tried flashing the CM12.1 rom yesterday but resulted in a boot loop. So for now, I'm just rooted and on stock rom until I or someone can find out what was the problem. I have read about the discussion with marshmallow but it seems to me that the project isn't really stable yet. From what I have researched lately, can I assume there's issue with the p51xx line of tablets? Because I saw many people having problems with p51xx and most people with the other tablets aren't having any.
Click to expand...
Click to collapse
Did you clear dalvik cache in recovery before flashing rom?

Zte blade l said:
Did you clear dalvik cache in recovery before flashing rom?
Click to expand...
Click to collapse
Yes, I cleared the top four options in recovery, and formatted data before flashing.
billysam said:
Yes, that's what I meant too, if you're on jb already, you are fine. You don't have to unroot. For making a nandroid backup, use twrp recovery, there is an option for backup, select and backup all from there, if you get into bootloop or any other problem, as long as you can get back to recovery, you can restore from there. Most rom comes pre rooted.
Click to expand...
Click to collapse
That's what I did. Let me just briefly summarize what I have done:
used odin with twrp
booted into recovery and made back up
cleared dalvik, cache, system, and data, formatted data
flashed update supersu, booted into system and checked root with root checker
rebooted into recovery, cleared dalvik, cache, system, and data, formatted data again
flashed cm12.1 and gapps, rebooted but ran into bootloop at splash screen
rebooted into recovery and restored back up
So I'm rooted and on stock 4.2.2 currently.
champ1919 said:
When you flashed the new rom, did you do a factory reset (wipe data)?
Sent from my SAMSUNG-SM-G870A using XDA Free mobile app
Click to expand...
Click to collapse
I did.

Try flashing blisspop or slimLP.

Rooted Stock ROM, trying to update TWRP and flash a new custom ROM

Ok so I figure I'll just ask since there is so much old information, and dead links or links that lead to no real answers. I'm already rooted and on a stock rom. Build number is LMY48C. I tried flashing a new TWRP version, 3.2.3.0 official version, but every time I try to reboot to recovery it just stays on the Nvidia logo. I can boot back to the tablet and flash my old version, 2.8.7.1 and everything works fine. But nothing remotely new will flash with that version lol. Any ideas of what I'm missing? Thanks in advance for anyone that can help, I'm sure it's something stupidly easy that I'm messing up lol.

I'd recommend flashing back to stock using the latest Nvidia image...then allow it to upgrade itself...they only have 5.2 available on their site...after it upgrades you'll have the newest bootloader...then in fastboot flash your recovery.
Make sure you're bootloader unlocked the whole time! And don't lock it...leave it unlocked.
You should be good to go after that.
Extra info...I'm on LOS 14.1 using opengapp (custom config so it only installs what I want)
I also flash a few other things but everything is working on my shield....even Nvidia Games

HaRdC0r3 said:
I'd recommend flashing back to stock using the latest Nvidia image...then allow it to upgrade itself...they only have 5.2 available on their site...after it upgrades you'll have the newest bootloader...then in fastboot flash your recovery.
Make sure you're bootloader unlocked the whole time! And don't lock it...leave it unlocked.
You should be good to go after that.
Extra info...I'm on LOS 14.1 using opengapp (custom config so it only installs what I want)
I also flash a few other things but everything is working on my shield....even Nvidia Games
Click to expand...
Click to collapse
Thanks for the reply. I was honestly just hoping there was a way to flash the newest bootloader without going to stock, but it looks like that's not an option. Ohh well, One more question, since you're actually on u custom ROM, does HDMI out work? I use that a lot with my TV haha.

If you want the easy quick way then you could pull the bootloader from the newest 15.1 zip as steel included it....flash the bootloader through fastboot and then proceed to flash twrp then wipe wipe wipe and install whatever rom you wanted...I still suggest 14.1 and yes the HDMI works.

HaRdC0r3 said:
If you want the easy quick way then you could pull the bootloader from the newest 15.1 zip as steel included it....flash the bootloader through fastboot and then proceed to flash twrp then wipe wipe wipe and install whatever rom you wanted...I still suggest 14.1 and yes the HDMI works.
Click to expand...
Click to collapse
Thanks for the reply, computer was messed up so couldn't see this sooner lol. Anyway, since I have no idea how to just pull the bootloader from a file, I'll have to do the whole thing it seems. Thanks for your reply ^_^