hey guys plz I want to restore onandroid backup from fastboot but I don't know how I boot in to fastboot I try to open cmd and I typed the command of fastboot but it's tell me something like the operation failed plz help
If you have an adb shell set up on a computer, plug your phone in (with usb debugging enabled) and type the command "adb reboot fastboot" and that should do the trick. Failing that, try the command "adb reboot bootloader". I know that on HTC phones at least you can manually navigate to fastboot mode from bootloader.
freaky.storm said:
hey guys plz I want to restore onandroid backup from fastboot but I don't know how I boot in to fastboot I try to open cmd and I typed the command of fastboot but it's tell me something like the operation failed plz help
Click to expand...
Click to collapse
If you want to restore a nandroid backup, you must use CWM.
Related
I've been looking around at different forums to see how to get my phone back to normal and there many ways to do it and I'm stuck.I'm able to use clockwork recovery,able to use fastboot but SD card is mounted and has an error everytime I try unmount , been trying to use the command propmt not that experienced I need some guidance to how to get another rom on phone
Try to flash the stock recovery, relock the bootloader with "fastboot oem lock" and flash a RUU.
Then try again from the beginning
Do I use the command propmt or Fastboot or clockwork
dannyzat said:
Do I use the command propmt or Fastboot or clockwork
Click to expand...
Click to collapse
Open cmd prompt. Navigate to folder where your fastboot program is (i.e. c:\android is where I put mine).
Plug in phone, boot into bootloader and click power to access fastboot.
Type in the "fastboot OEM lock" command in command prompt as suggested by torxx and that will relock the bootloader. Then flash ruu in bootloader
Sent from my HTC VLE_U using Tapatalk 2
I did all of that except for the last sentence how do I flash on command prompt
dannyzat said:
I did all of that except for the last sentence how do I flash on command prompt
Click to expand...
Click to collapse
Once u relock bootloader, you are done with command prompt... I think. I havemt done it on this phone, but usually you put ruu on root of sdcard (internal in this case) and reboot into bootloader and the ruu should begin flashing from there. Make sure its named properly. I'm sure there are threads regarding this
Sent from my HTC VLE_U using Tapatalk 2
still learning how to develope android phone's
Ok I'm on bootloader but idk. How to put the ruu on my sdcard if its mounted
dannyzat said:
Ok I'm on bootloader but idk. How to put the ruu on my sdcard if its mounted
Click to expand...
Click to collapse
try the adb command just go to this link http://forum.xda-developers.com/showthread.php?t=1667929 everything is there
ok i looked at the link and try to push the rom but the adb is not even detecting my device
this is what i get:C:\Documents and Settings\Jamal\Android>adb push rom.zip/sdcard
Android Debug Bridge version 1.0.29 and then all the information about adb about the options and commands
Im on fastboot right now and using the command prompt still, the bootloader is unlocked, and i dont think adb has dected my device beacause it does this for every command: C:\Documents and Settings\Jamal\Android>adb shell
error: device not found
C:\Documents and Settings\Jamal\Android>adb remount
error: device not found
C:\Documents and Settings\Jamal\Android>adb root
error: device not found
ps. my device is connected to the computer fastboot commands work but not adb
try installing the htc drivers for the One S then retry adb
ok so i just did this recently:C:\Documents and Settings\Jamal\Android>fastboot boot rom.zip
creating boot image...
creating boot image - 468381696 bytes
downloading 'boot.img'...
OKAY [946.172s]
booting...
FAILED (remote: reproduce boot image with on-flash ramdisk error)
finished. total time: 946.656s
Is this a good sign?
Plus how do you install drivers
dannyzat said:
ok so i just did this recently:C:\Documents and Settings\Jamal\Android>fastboot boot rom.zip
creating boot image...
creating boot image - 468381696 bytes
downloading 'boot.img'...
OKAY [946.172s]
booting...
FAILED (remote: reproduce boot image with on-flash ramdisk error)
finished. total time: 946.656s
Is this a good sign?
Plus how do you install drivers
Click to expand...
Click to collapse
download HTC sync make sure you read the steps right on that link and make you flash the recovery and download the Rom and push it
thank you all for helping me out
How do I get access to unmounting my sdcard cause it keeps having errors when I try to mount it in clockwork mod recoverybut still having errors
PS. Ek07 how do I use the HTC sync manager on my phone do I go to fastboot or clockwork
Hello,
I have followed a tutorial for solving the problem of "Fastboot mode started
udc_start()" from this thread http://forum.xda-developers.com/showthread.php?t=2131247 and something was go wrong.
I have done this steps in the sdk platform tools folder:
1- fastboot erase recovery
2- fastboot flash recovery recovery.img ( here i've got an error)
3- fastboot reboot
Everyting was ok until I have tried to write the .img file on the phone. I've got an error that I don't have enough space. I think I have deleted the recovery file and now it's stuck, because it's not booting. The 4 leds from the bottom it's flashing continuously and the screen remains to the LG logo. I have tried to connect the phone to the PC but the device it's not recognized anymore. I get this message in the adb tool "Waiting for device"
I really appreciate if it's someone that can help me
I have a p500 and I had the exact same problem as you. But I was able to fix it after a lot of Googling.
Can you get to fastboot right now? If so, make sure that the recovery you downloaded is correctly named "recovery.img" and is placed in the same folder as adb.exe is located. After that, type:
Code:
fastboot devices
into ADB. If your device is listed then proceed and type:
Code:
fastboot flash recovery recovery.img
If nothing comes up when you ask it to list fastboot devices you need to delete all of the drivers associated with your p350, and then reinstall them using a toolkit or PDAnet. Then go back and try fastboot devices again.
.
Logan_M said:
I have a p500 and I had the exact same problem as you. But I was able to fix it after a lot of Googling.
Can you get to fastboot right now? If so, make sure that the recovery you downloaded is correctly named "recovery.img" and is placed in the same folder as adb.exe is located. After that, type:
Code:
fastboot devices
into ADB. If your device is listed then proceed and type:
Code:
fastboot flash recovery recovery.img
If nothing comes up when you ask it to list fastboot devices you need to delete all of the drivers associated with your p350, and then reinstall them using a toolkit or PDAnet. Then go back and try fastboot devices again.
.
Click to expand...
Click to collapse
No, I can't get to fastboot. I can't do anything with the command line. It remains to the logo screen
catalin11 said:
No, I can't get to fastboot. I can't do anything with the command line. It remains to the logo screen
Click to expand...
Click to collapse
Can you pull the battery and then use the combination to get into Fastboot? If you can't get to fastboot, then the problem is beyond what I'm capable of doing.
Though, the problem may be that you completely deleted your recovery.
Logan_M said:
Can you pull the battery and then use the combination to get into Fastboot? If you can't get to fastboot, then the problem is beyond what I'm capable of doing.
Though, the problem may be that you completely deleted your recovery.
Click to expand...
Click to collapse
Now, I'm back to the first problem
"Fastboot mode started udc_start()
-- suspend --
-- suspend --
"
catalin11 said:
Now, I'm back to the first problem
"Fastboot mode started udc_start()
-- suspend --
-- suspend --
"
Click to expand...
Click to collapse
if i write this in cmd "fastboot flash recovery recovery.img" it apear < waiting for device > and nothing happens
catalin11 said:
if i write this in cmd "fastboot flash recovery recovery.img" it apear < waiting for device > and nothing happens
Click to expand...
Click to collapse
now i'm in the emergency mode
Problem solved:
1- download the official drivers from LG Site
2- cmd and:
fastboot erase boot
fastboot erase system
fastboot erase userdata
fastboot -w
fastboot flash recovery recovery.img (Clowork custom recovery)
Fastboot Reboot
Installing Cyanogen after i erase everything (fastboot erase sdcard). I like fresh starts
some1 pls help me
catalin11 said:
Problem solved:
1- download the official drivers from LG Site
2- cmd and:
fastboot erase boot
fastboot erase system
fastboot erase userdata
fastboot -w
fastboot flash recovery recovery.img (Clowork custom recovery)
Fastboot Reboot
Installing Cyanogen after i erase everything (fastboot erase sdcard). I like fresh starts
Click to expand...
Click to collapse
can u plz elaborate...i too have the same problem....plz..
Logan_M said:
If so, make sure that the recovery you downloaded is correctly named "recovery.img" and is placed in the same folder as adb.exe is located.
Click to expand...
Click to collapse
That is incorrect. The recovery does NOT have to be named recovery to use fastboot to flash it, although it does make life simpler
Hello all,
as the title says, I'm stuck in TWRP recovery after wiping my rom to revert to stock... then realising that the recovery doesn't recognise the image as it's a .tgz file.
I've tried to ADB into it, but no such luck, I just get error: device not found.
Does anyone know a way I can fix this?
I've also tried the adb sideload feature of TWRP to no avail.
Thanks in advanced guys.
Flash the factory image through fastboot. Download and run flash-all.bat (something along those lines)
Sent from my Nexus 5 using Tapatalk
Go to bootloader and run "fastboot devices" and see whether your device gets detected or not? If it does, then flash the factory images. System and boot img files would do the job.
If it doesn't then you need to fix the adb, fastboot issues first. Follow these threads:
http://forum.xda-developers.com/goo...nosing-usb-driver-adb-issues-windows-t2514396
http://forum.xda-developers.com/goo...nt/adb-fb-apx-driver-universal-naked-t2513339
If you have an OTG cable with you, you can directly flash the rom from a usb stick!
tangosierra_ said:
Flash the factory image through fastboot. Download and run flash-all.bat (something along those lines)
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
'fastboot is not recognised as an internal or external command, operable program or batch file.'
Also, i'm trying this from the PC just to be clear, as I can't boot my phone lol.
soon as i run flash-all.bat i get the error i put on the first line
Dixi1801 said:
'fastboot is not recognised as an internal or external command, operable program or batch file.'
Also, i'm trying this from the PC just to be clear, as I can't boot my phone lol.
soon as i run flash-all.bat i get the error i put on the first line
Click to expand...
Click to collapse
You havent got fastboot installed.
Go to teh link in my signature.... Then go to section 1b, 1
usb/otg
Dixi1801 said:
Hello all,
as the title says, I'm stuck in TWRP recovery after wiping my rom to revert to stock... then realising that the recovery doesn't recognise the image as it's a .tgz file.
I've tried to ADB into it, but no such luck, I just get error: device not found.
Does anyone know a way I can fix this?
I've also tried the adb sideload feature of TWRP to no avail.
Thanks in advanced guys.[/QUOT
Download any compatible rom to a usb/otg..mount from TRWP and your good to go..Happens to me once..Just download any compatible roms just to bring up your phone..
Click to expand...
Click to collapse
Dixi1801 said:
'fastboot is not recognised as an internal or external command, operable program or batch file.'
Also, i'm trying this from the PC just to be clear, as I can't boot my phone lol.
soon as i run flash-all.bat i get the error i put on the first line
Click to expand...
Click to collapse
remove all old drivers and restart
install http://forum.xda-developers.com/showthread.php?p=42407269&__utma=248941774.1031819907.1403635167.1403781687.1403790944.7&__utmb=248941774.1.10.1403790944&__utmc=248941774&__utmx=-&__utmz=248941774.1403790944.7.7.utmcsr=google|utmccn=%28organic%29|utmcmd=organic|utmctr=%28not%20provided%29&__utmv=-&__utmk=239174656
place the android sdk windows file attached here in c: drive
now start cmd prompt and type
Code:
cd c:\android-sdk-windows\platform-tools
now proceed with fastboot command in this order
Code:
fastboot flash bootloader C:/hammerhead-ktu84m/bootloader.img
fastboot reboot-bootloader
fastboot flash radio C:/hammerhead-ktu84m/radio.img
fastboot reboot-bootloader
fastboot flash system C:/hammerhead-ktu84m/system.img
fastboot flash userdata C:/hammerhead-ktu84m/userdata.img
fastboot flash boot C:/hammerhead-ktu84m/boot.img
fastboot flash recovery C:/hammerhead-ktu84m/recovery.img
fastboot erase cache
note:remember to extract the factory stock image till u see these files attached and place it in C: drive and yes the built name should be same as yours of 4.4.4 then KTU84P inplace of ktu84m
shhbz said:
remove all old drivers and restart
install http://forum.xda-developers.com/sho...mctr=(not provided)&__utmv=-&__utmk=239174656
place the android sdk windows file attached here in c: drive
now start cmd prompt and type
Code:
cd c:\android-sdk-windows\platform-tools
now proceed with fastboot command in this order
Code:
fastboot flash bootloader C:/hammerhead-ktu84m/bootloader.img
fastboot reboot-bootloader
fastboot flash radio C:/hammerhead-ktu84m/radio.img
fastboot reboot-bootloader
fastboot flash system C:/hammerhead-ktu84m/system.img
fastboot flash userdata C:/hammerhead-ktu84m/userdata.img
fastboot flash boot C:/hammerhead-ktu84m/boot.img
fastboot flash recovery C:/hammerhead-ktu84m/recovery.img
fastboot erase cache
note:remember to extract the factory stock image till u see these files attached and place it in C: drive and yes the built name should be same as yours of 4.4.4 then KTU84P inplace of ktu84m
Click to expand...
Click to collapse
Too Long. 15 second installer is the best way to get adb and fastboot. See previous post
Sent from my Nexus 5 using Tapatalk
rootSU said:
Too Long. 15 second installer is the best way to get adb and fastboot. See previous post
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
was unable to find link to 15 second installer as what i remember was the minimal adb and fastboot and both works great and flash-all.bat script does not work evrytime so just wanted the guy to be sure the he type the commands in right direction instead getting error cant find and stuff
shhbz said:
was unable to find link to 15 second installer as what i remember was the minimal adb and fastboot and both works great
Click to expand...
Click to collapse
1b1 in the link in my signature.
Minimal is fine but you have to manually add to environment variables or cd to the directory but that's all done with the 15 seconds one.
Sent from my Nexus 5 using Tapatalk
Thanks for the help guys.
RootSU, you saved me haha, was sat at work stressing trying to sort the mess I made out!
I'm all stock now... But the screen keeps going off because of the proximity sensor haha -_-
Thanks again though. Can always count on a Yorkshireman
The important thing is to remain calm and know it can be fixed
Sent from my Nexus 5 using Tapatalk
Odd thing really, When I type "adb Devices" when My Moto G is in fastboot, No devices are found.
How ever, When I Simply boot up my phone, adb can find it perfectly fine.
My drivers are up to date.
Can someone help me with this?
Do you have adb debugging enabled?
If your phone is in fastboot mode, type "fastboot devices" at the command prompt.
I don't believe ADB commands work in fastboot. ADB commands are used in debugging mode.
audit13 said:
If your phone is in fastboot mode, type "fastboot devices" at the command prompt.
I don't believe ADB commands work in fastboot. ADB commands are used in debugging mode.
Click to expand...
Click to collapse
oh Such a rookie mistake, Thanks.
Trying to fix my dumb error, I have a XT1034 but Resored it to A XT1033 Firmaware
Did the fastboot command find you phone when the phone was in fastboot mode?
We were all rookies at one point
Hello. I am new to rooting and I wanted to root my old Moto E3 power. But the problem is when I flash TWRP into the recovery it says OKAY and finished then when I try to enter recovery mode my phone just boots up the OS and TWRP is not installed. Please help. Thank you in advance.
Fastboot commands operate on phone's bootloader, not on Android OS as this ADB does.
jwoegerbauer said:
Fastboot commands operate on phone's bootloader, not on Android OS as this ADB does.
Click to expand...
Click to collapse
I know. What i wanted to say was when I do "fastboot flash recovery recovery.img" it just says OKAY and finished. As my phone's power button is broken I can't go directly into recovery from there what do I do?? and also thank you for replying.
Code:
adb devices
adb reboot recovery
jwoegerbauer said:
Code:
adb devices
adb reboot recovery
Click to expand...
Click to collapse
ok I did that now it says no command on the recovery and no TWRP. Now what?
Reflash phone's Stock ROM to get rid off of all modifications you applied so far.