Heres a modded linux script based on the defyroot script to unroot your defy
Code:
#!/bin/bash
# execute as bash root_Defy.v2
# Following Bin4ry instructions
# Using http://c-skills.blogspot.com/2010/07/android-trickery.html exploit
# See http://intrepidusgroup.com/insight/2010/09/android-root-source-code-looking-at-the-c-skills/ for an explanation of the exploit
ADB="./adblinux"
if [ ! -e $ADB ] ; then
echo "adb not found! Cannot continue." ;
exit 1 ;
fi
chmod +x $ADB
if [ $(grep -ic 22b8 /etc/udev/rules.d/51-android.rules) -eq 0 ] ; then
echo "SUBSYSTEM=="usb", ATTRS{idVendor}==\"22b8\", MODE=\"0666\"" >> /etc/udev/rules.d/51-android.rules ;
fi
if [ $($ADB devices | grep -c device$) -ne 1 ] ; then
echo "Too many devices attached: exiting!" ;
exit 1;
fi
SERIALNO=`$ADB devices | grep device$ | cut -f1`
if [ $? -eq 0 ] ; then
echo "Found device $SERIALNO" ;
else
echo "Error searching device number!" ;
exit 1;
fi
for file in rageagainstthecage su Superuser.apk ; do
echo -n "Pushing $file: " ;
$ADB -s $SERIALNO push $file /data/local/tmp/$file ;
echo "done" ;
done
#$ADB -s $SERIALNO push rageagainstthecage /data/local/tmp/rageagainstthecage
#$ADB -s $SERIALNO push su /data/local/tmp/su
#$ADB -s $SERIALNO push Superuser.apk /data/local/tmp/Superuser.apk
echo -n "Making rageagainstthecage executable and executing it: "
$ADB -s $SERIALNO shell chmod 755 /data/local/tmp/rageagainstthecage
$ADB -s $SERIALNO shell /data/local/tmp/rageagainstthecage
echo "done"
echo "Waiting 15 sec for phone adbd to restart before continuing"
sleep 15
echo -n "Remounting filesystem in read-write mode: "
$ADB -s $SERIALNO shell mount -o remount,rw -t ext3 /dev/block/mmcblk1p21 /system
echo "done"
echo -n "Removing su command: "
$ADB -s $SERIALNO shell rm /system/bin/su
echo "done"
echo -n "Removing Superuser apk: "
$ADB -s $SERIALNO shell rm /system/app/Superuser.apk
echo "done"
exit 0
added to linux tools, thanks!
By editing the original I could ensure that only what was created in the original, was altered, although in theory you should be able to strip or add anyfiles you want in the same way.
Works for sure on fedora 15 and opensuse11.4 and any the original script works on.
Hello all,
I really would appreciate some help rooting my AT&T Skyrocket. I have spent at least 7 hours trying to figure out this stuff. I have downloaded the super easy one click root thing and followed everything to a T as far as I can tell. It has been really painful learning all this stuff.
I clicked the debugging icon under development on the phone.
I read the read me file and put in the correct commands in terminal to initiate the linux-mac.sh file. I
The program actually starts running and this is what is on my terminal display..
Root for the Samsung Skyrocket
By Revolutionary
One Click Done by
Shabbypenguin
Press any key to continue...Starting adb server
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
You need to enable usb debugging first
Go to settings > applications > development
* Running exploit...
error: device not found
error: device not found
error: device not found
deleting all yo ****
Wait for phone to reconnect...
*******************************************************
It stops at the wait for phone to connect line and just sits there. I have left it there for ten minutes and nothing changed.
I would really appreciate any help that I could get.
Dave
Add these two lines after "echo wait for phone to reconnect"
$adb wait-for-device
$adb remount
Obviously open the file in text edit to edit these.
(thanks to @narkee for this)
Sent from my SAMSUNG-SGH-I727 using XDA App
Thanks for the reply
Thank you for the reply.
I opened my file to put these in and it looks like I did put one of the lines in from some other source I found on the internet and the second line you mention is already in my file. Here is a copy of my script. Again, any help would be appreciated. Thank you
#!/bin/bash
# Unix OS Sniffer and $adb setup by Firon
platform=`uname`;
adb="adb";
if [ $(uname -p) == 'powerpc' ]; then
echo "Sorry, this won't work on PowerPC machines."
exit 1
fi
cd "$(dirname "$0")"
if [ -z $(which adb) ]; then
adb="./adb";
if [ "$platform" == 'Darwin' ]; then
mv adb.osx $adb > /dev/null 2>&1
fi
fi
chmod +x $adb
# End section, thanks Firon!
echo
clear
echo
echo "Root for the Samsung Skyrocket"
echo
echo "By Revolutionary"
echo
echo "One Click Done by"
echo "Shabbypenguin"
echo
read -n1 -s -p "Press any key to continue..."
echo -e "Starting adb server"
if [ -z $(which sudo 2>/dev/null) ]; then
$adb kill-server
else
sudo $adb kill-server
fi
if [ -z $(which sudo 2>/dev/null) ]; then
$adb start-server
else
sudo $adb start-server
fi
echo "You need to enable usb debugging first"
echo "Go to settings > applications > development"
sleep 2
echo "* Running exploit..."
$adb push zergRush /data/local/
$adb shell chmod 755 /data/local/zergRush
$adb shell /data/local/zergRush
echo "deleting all yo ****"
echo "Wait for phone to reconnect..."
$adb wait-for-device
$adb remount
$adb push rootsetup /data/local/tmp/rootsetup
$adb shell chmod 755 /data/local/tmp/rootsetup
$adb shell /data/local/tmp/rootsetup
$adb shell rm /data/local/tmp/rootsetup
$adb shell sync
echo "Copying files onto phone..."
$adb push su /system/xbin/su
$adb push Superuser.apk /system/app/Superuser.apk
$adb push busybox /system/xbin/busybox
$adb push remount /system/xbin/remount
echo "Setting permissions..."
$adb shell chmod 755 /system/xbin/busybox
$adb shell chmod 755 /system/xbin/remount
$adb shell chown root.shell /system/xbin/su
$adb shell chmod 4755 /system/xbin/su
$adb shell ln -s /system/xbin/su /system/bin/su
echo "Installing busybox..."
$adb shell /system/xbin/busybox --install -s /system/xbin
echo "Cleaning up files..."
sleep 5;
$adb shell rm /data/local/tmp/*
$adb shell rm /data/local/zergRush
$adb reboot
if [ -z $(which sudo 2>/dev/null) ]; then
$adb kill-server
else
sudo $adb kill-server
fi
echo "All done!"
echo
read -n1 -s -p "Press any key to exit the script."
echo
UPDATE!! Original poster here. For whoever might stumble upon this in the future....I used the exact same method on my iMac as I had my Macbook and was able to root the phone right away. I don't know why the desktop worked but the laptop didn't but it did. Good luck to others that try to root. It was a painful learning curve considering I have never used any terminal commands before, but I could probably root this phone again in about five minutes.
That's odd but glad it worked! I've rooted on both and both worked fine for me. Hmmm
Sent from my SAMSUNG-SGH-I727 using XDA App
This is a simple script that automatically flashes a new boot animation. It does the remount and deletion commands automatically to provide an easy and fast way to flash boot animations.
ADB ROOT command must be functioning for this to work properly.
DISCLAIMER: THE CREATOR IS NOT RESPONSIBLE FOR DAMAGE CAUSED BY THE USE OF THIS SCRIPT! USE THIS AT YOUR OWN RISK!!!
1. Copy the code below into a new notepad window.
2. Save the file as bootanimation flasher.bat in the folder where adb and its components are located. (MAKE SURE YOU HAVE THE .bat EXTENSION)
3. Run the script!
Common Errors:
"error protocol failure" - this error occurs when the command adb root did not function properly. Fix the issue and try again. Try and re-enable usb debugging if it still doesn't work.
Try and use this app to get adb root functioning: http://forum.xda-developers.com/showthread.php?t=1687590
This was tried and tested with success on a oneplus one and a moto g (1st gen)
Script (click button to show):
@echo off
echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
echo ROOT ACCESS IS REQUIRED. ADB ROOT COMMAND MUST BE FUNCTIONING.
echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
echo THE CREATOR OF THIS SCRIPT IS NOT RESPONSIBLE FOR ANY DAMAGE!
echo USE THIS AT YOUR OWN RISK!!!
echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PAUSE
cls
echo Starting ADB!
adb kill-server > nul
adb start-server > nul
echo Done!
timeout -t 1 > nul
:menu
cls
echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
echo IF YOUR DEVICE IS LISTED BELOW TYPE 1
echo TYPE 2 TO TRY AGAIN
echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
adb devices
SET /p startcheck= Type your choice:
if "%startcheck%" =="1" goto ask
if "%startcheck%" =="2" goto menu
goto menu
:ask
cls
echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
echo TYPE 1 TO FLASH BOOTANIMATION!
echo TYPE 2 TO BACKUP EXISTING BOOTANIMATION THEN FLASH!
echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SET /p askbackup= Type your choice:
if "%askbackup%" =="1" goto anim
if "%askbackup%" =="2" goto backup
goto menu
:backup
cls
echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
echo TYPE THE PATH TO BACKUP BOOTANIMATION TO!
echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SET /p backuppath= Type your path and press enter:
cls
echo Backing Up!
adb pull /system/media/bootanimation.zip %backuppath%
echo Done
PAUSE
goto anim
:anim
cls
echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
echo TYPE THE PATH FOR YOUR bootanimation.zip
echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SET /p bapath= Type your path here and press enter:
cls
echo Running command adb root...
adb wait-for-device root > nul
timeout -t 1 > nul
echo Success, Root Access obtained!
echo Remounting system in read-write mode!
adb wait-for-device remount > nul
timeout -t 1 > nul
adb wait-for-device shell "su -c 'mount -o rw,remount -t yaffs2 /dev/block/mtdblock1 /system'"
echo Remount Succeded!
echo Deleting existing bootanimation!
adb wait-for-device shell "su -c 'rm /system/media/bootanimation.zip'"
echo Sending new bootanimation!
adb push %bapath% /system/media
echo Remounting system in read-only mode!
adb wait-for-device shell "su -c 'mount -o ro,remount -t yaffs2 /dev/block/mtdblock1 /system'"
echo Done!
echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
echo Press 1 to Reboot!
echo Press 2 to Exit!
SET /p dm= Type your choice
if "%dm%" =="1" goto reboot
if "%dm%" =="2" goto exit
:reboot
cls
echo Rebooting!
adb reboot
timeout -t 1 > nul
PAUSE
:exit
exit
Ok, after some reading, testing and trying, my conclusion is that it is not possible to tweak a running system with not triggering SELinux.
Though, for letting banking apps work it is only needed to modify the build.prop in /system, which is in fact possible, even without TWRP.
So, this is what I am doing now:
Reboot into (LOS) recovery and then in the recovery menu:
Goto “Advanced”
Mount /system
Enable adb
From your pc with adb etc.. installed:
Code:
adb shell mount -o rw,remount /mnt/system
adb shell sed -i 's/ro.debuggable=1/ro.debuggable=0/g' /mnt/system/system/build.prop
adb shell sed -i 's/ro.build.type=userdebug/ro.build.type=user/g' /mnt/system/system/build.prop
adb reboot
That's it, banking apps working!
Okay, did some further research and in fact, found a solution for my "tweaking".
Though I have the feeling most people are not tweaking anymore, I hope it helps for the few people still interested! For me the result is a more lean system, working banking apps and HD calling (VoLTE), and it is just nice to do... ;-)
Scripts and approach can be found in the next posts.
After some boot issues I finally found out what was the issue of my problems with some tweaking around.
As we have a device with A/B, after flashing the update, the active partition is automatically switched after an update. This happens when flashing, so you have to reboot to recovery again directly after flashing the updated LOS and do the tweaking then to actually tweak the right partition...
A system update for me is now:
Code:
Reboot into recovery
CHECK WHICH IS THE ACTIVE PARTITION!!
Goto “Apply Update”
Goto “Apply from adb”
adb sideload <lineageos.zip>
Goto “Advanced”
Goto “Reboot to recovery”
CHECK WHICH IS THE ACTIVE PARTITION, SHOULD BE CHANGED!!
In recovery:
Goto “Advanced”
Goto “Mount /system”
Goto “Enable ADB”
Run tweak.bat
For the latest tweak script (a bat file) I am using now, see the next post.
Hope it helps for people with banking or VoLTE issues and the need to change some settings in build.prop or else... Use the information at your own risk
Latest tweaks.bat file (last changes 25/04/2023):
Code:
:: Moto G100 Tweak Script
:: Last modified 25-04-2023
:: Moto-J
:: ------------------------------------------------------------
:: Changelog:
::
:: 22-04-23 Added:
:: adb shell rm -rf /mnt/product/app/ApertureLensLauncher
:: adb shell rm -rf /mnt/system_ext/app/MotoActions
:: adb shell rm -rf /mnt/system_ext/app/WAPPushManager
:: adb shell rm -rf /mnt/system_ext/priv-app/LineageSetupWizard
:: ------------------------------------------------------------
@echo off
Setlocal EnableDelayedExpansion
color 0A
cls
echo MOTO G100 TWEAK SCRIPT
echo.
echo IMPORTANT:
echo - First boot into recovery
echo - Goto advanced and mount /system
echo - Goto advanced and enable adb
echo.
pause
echo.
echo ------------------------------------
echo Connecting device...................
echo ------------------------------------
echo.
echo Terminal output will be displayed here:
adb devices
:: ------------------------------------------------------------
echo ------------------------------------
echo Mounting system partitions..........
echo ------------------------------------
echo.
echo Terminal output will be displayed here:
:: /dev/block/dm-6 = /product
:: /dev/block/dm-7 = /system
:: /dev/block/dm-8 = /system_ext
:: /dev/block/dm-9 = /vendor
adb shell mkdir /mnt/product > nul 2>&1
adb shell mkdir /mnt/system > nul 2>&1
adb shell mkdir /mnt/system_ext > nul 2>&1
adb shell mkdir /mnt/vendor > nul 2>&1
adb shell mount -o rw,remount /mnt/system
adb shell mount /dev/block/dm-6 /mnt/product
adb shell mount /dev/block/dm-7 /mnt/system > nul 2>&1
adb shell mount /dev/block/dm-8 /mnt/system_ext
adb shell mount /dev/block/dm-9 /mnt/vendor
echo.
echo done
echo.
pause
echo.
:: ------------------------------------------------------------
echo ------------------------------------
echo Removing some packages..............
echo ------------------------------------
echo.
echo Terminal output will be displayed here:
:: /product/app
adb shell rm -rf /mnt/product/app/Aperture
adb shell rm -rf /mnt/product/app/ApertureLensLauncher
adb shell rm -rf /mnt/product/app/Backgrounds
adb shell rm -rf /mnt/product/app/Gallery2
adb shell rm -rf /mnt/product/app/Jelly
adb shell rm -rf /mnt/product/app/PhotoTable
adb shell rm -rf /mnt/product/app/PowerOffAlarm
:: /product/priv-app
adb shell rm -rf /mnt/product/priv-app/Eleven
adb shell rm -rf /mnt/product/priv-app/OneTimeInitializer
:: /system/app
adb shell rm -rf /mnt/system/system/app/BasicDreams
adb shell rm -rf /mnt/system/system/app/BluetoothMidiService
adb shell rm -rf /mnt/system/system/app/BookmarkProvider
adb shell rm -rf /mnt/system/system/app/CaptivePortalLogin
adb shell rm -rf /mnt/system/system/app/CarrierDefaultApp
adb shell rm -rf /mnt/system/system/app/CompanionDeviceManager
adb shell rm -rf /mnt/system/system/app/EasterEgg
adb shell rm -rf /mnt/system/system/app/HTMLViewer
adb shell rm -rf /mnt/system/system/app/PrintRecommendationService
adb shell rm -rf /mnt/system/system/app/SimAppDialog
adb shell rm -rf /mnt/system/system/app/Stk
adb shell rm -rf /mnt/system/system/app/WallpaperBackup
:: /system/priv-app
adb shell rm -rf /mnt/system/system/priv-app/BackupRestoreConfirmation
adb shell rm -rf /mnt/system/system/priv-app/CallLogBackup
adb shell rm -rf /mnt/system/system/priv-app/InputDevices
adb shell rm -rf /mnt/system/system/priv-app/LiveWallpapersPicker
adb shell rm -rf /mnt/system/system/priv-app/ManagedProvisioning
adb shell rm -rf /mnt/system/system/priv-app/SharedStorageBackup
adb shell rm -rf /mnt/system/system/priv-app/StatementService
adb shell rm -rf /mnt/system/system/priv-app/Tag
adb shell rm -rf /mnt/system/system/priv-app/VpnDialogs
:: /system_ext/app
adb shell rm -rf /mnt/system_ext/app/datastatusnotification
adb shell rm -rf /mnt/system_ext/app/IfaaService
adb shell rm -rf /mnt/system_ext/app/MotoActions
adb shell rm -rf /mnt/system_ext/app/SoterService
adb shell rm -rf /mnt/system_ext/app/WAPPushManager
:: /system_ext/priv-app
adb shell rm -rf /mnt/system_ext/priv-app/LineageSetupWizard
adb shell rm -rf /mnt/system_ext/priv-app/Seedvault
adb shell rm -rf /mnt/system_ext/priv-app/Updater
:: /vendor/app
adb shell rm -rf /mnt/vendor/app/TimeService
:: For debugging purposes:
adb shell ls /mnt/product/app > _packages-product-app.txt
adb shell ls /mnt/product/priv-app > _packages-product-priv-app.txt
adb shell ls /mnt/system/system/app > _packages-system-system-app.txt
adb shell ls /mnt/system/system/priv-app > _packages-system-system-priv-app.txt
adb shell ls /mnt/system_ext/app > _packages-system_ext-app.txt
adb shell ls /mnt/system_ext/priv-app > _packages-system_ext-priv-app.txt
adb shell ls /mnt/vendor/app > _packages-vendor-app.txt
echo.
echo done
echo.
pause
echo.
:: ------------------------------------------------------------
echo ------------------------------------
echo Modifying /system/build.prop........
echo ------------------------------------
echo.
echo Terminal output will be displayed here:
:: First remove the lines if available
adb shell sed -i '/^# Modified settings/d' /mnt/system/system/build.prop
adb shell sed -i '/^ro.debuggable/d' /mnt/system/system/build.prop
adb shell sed -i '/^ro.build.type/d' /mnt/system/system/build.prop
adb shell sed -i '/^fw.show_multiuserui/d' /mnt/system/system/build.prop
adb shell sed -i '/^fw.power_user_switcher/d' /mnt/system/system/build.prop
adb shell sed -i '/^fw.show_hidden_users/d' /mnt/system/system/build.prop
adb shell sed -i '/^ro.backup.disable/d' /mnt/system/system/build.prop
adb shell sed -i '/^ro.config.ksm.support/d' /mnt/system/system/build.prop
adb shell sed -i '/^persist.debug.wfd.enable/d' /mnt/system/system/build.prop
adb shell sed -i '/^persist.debug.wfd.appmonitoring/d' /mnt/system/system/build.prop
adb shell sed -i '/^debug.sf.enable_hwc_vds/d' /mnt/system/system/build.prop
adb shell sed -i '/^persist.adb.notify/d' /mnt/system/system/build.prop
adb shell sed -i '/^# end of file/d' /mnt/system/system/build.prop
:: And now add them at the end of the file
adb shell sed -i -e '$a# Modified settings' /mnt/system/system/build.prop
:: Let banking apps work
adb shell sed -i -e '$aro.debuggable=0' /mnt/system/system/build.prop
adb shell sed -i -e '$aro.build.type=user' /mnt/system/system/build.prop
:: Disable user switching
adb shell sed -i -e '$afw.show_multiuserui=0' /mnt/system/system/build.prop
adb shell sed -i -e '$afw.power_user_switcher=0' /mnt/system/system/build.prop
adb shell sed -i -e '$afw.show_hidden_users=0' /mnt/system/system/build.prop
:: Disable backup provider
adb shell sed -i -e '$aro.backup.disable=1' /mnt/system/system/build.prop
:: Disable Kernel Samepage Merging (KSM)
adb shell sed -i -e '$aro.config.ksm.support=false' /mnt/system/system/build.prop
:: Disable Mira Cast (Wifi Direct) eating your battery
adb shell sed -i -e '$apersist.debug.wfd.enable=0' /mnt/system/system/build.prop
adb shell sed -i -e '$apersist.debug.wfd.appmonitoring=0' /mnt/system/system/build.prop
adb shell sed -i -e '$adebug.sf.enable_hwc_vds=0' /mnt/system/system/build.prop
:: Disable notification while adb is active
adb shell sed -i -e '$apersist.adb.notify=0' /mnt/system/system/build.prop
adb shell sed -i -e '$a# end of file' /mnt/system/system/build.prop
:: For debugging purposes:
adb pull /mnt/system/system/build.prop
del /F _build.system.prop > nul 2>&1
ren build.prop _build.system.prop
echo.
echo done
echo.
pause
echo.
:: ------------------------------------------------------------
echo ------------------------------------
echo Modifying /vendor/build.prop........
echo ------------------------------------
echo.
echo Terminal output will be displayed here:
:: First remove the lines if available
adb shell sed -i '/^# Modified settings/d' /mnt/vendor/build.prop
:: Firmware date
adb shell sed -i '/^ro.vendor.build.security_patch/d' /mnt/vendor/build.prop
:: Display
adb shell sed -i '/^debug.hwui.disable_vsync/d' /mnt/vendor/build.prop
adb shell sed -i '/^debug.hwui.render_dirty_regions/d' /mnt/vendor/build.prop
adb shell sed -i '/^persist.sys.use_dithering/d' /mnt/vendor/build.prop
adb shell sed -i '/^ro.sf.lcd_density/d' /mnt/vendor/build.prop
:: VoLTE (only what is missing)
adb shell sed -i '/^persist.dbg.ims_volte_enable/d' /mnt/vendor/build.prop
adb shell sed -i '/^persist.dbg.volte_avail_ovr/d' /mnt/vendor/build.prop
adb shell sed -i '/^persist.dbg.vt_avail_ovr/d' /mnt/vendor/build.prop
adb shell sed -i '/^persist.dbg.wfc_avail_ovr/d' /mnt/vendor/build.prop
adb shell sed -i '/^persist.vendor.radio.calls.on.ims/d' /mnt/vendor/build.prop
adb shell sed -i '/^persist.vendor.data.iwlan.enable/d' /mnt/vendor/build.prop
adb shell sed -i '/^# end of file/d' /mnt/vendor/build.prop
:: And now add them at the end of the file
adb shell sed -i -e '$a# Modified settings' /mnt/vendor/build.prop
:: Firmware date
set CUR_YYYY=%date:~9,4%
set CUR_MM=%date:~6,2%
set CUR_DD=%date:~3,2%
set SUBDATE=%CUR_YYYY%-%CUR_MM%-%CUR_DD%
adb shell sed -i -e '$aro.vendor.build.security_patch=%SUBDATE%' /mnt/vendor/build.prop
:: Display
adb shell sed -i -e '$adebug.hwui.disable_vsync=true' /mnt/vendor/build.prop
adb shell sed -i -e '$adebug.hwui.render_dirty_regions=false' /mnt/vendor/build.prop
adb shell sed -i -e '$apersist.sys.use_dithering=0' /mnt/vendor/build.prop
adb shell sed -i -e '$aro.sf.lcd_density=460' /mnt/vendor/build.prop
:: VoLTE (only what is missing)
adb shell sed -i -e '$apersist.dbg.ims_volte_enable=1' /mnt/vendor/build.prop
adb shell sed -i -e '$apersist.dbg.volte_avail_ovr=1' /mnt/vendor/build.prop
adb shell sed -i -e '$apersist.dbg.vt_avail_ovr=1' /mnt/vendor/build.prop
adb shell sed -i -e '$apersist.dbg.wfc_avail_ovr=1' /mnt/vendor/build.prop
adb shell sed -i -e '$apersist.vendor.radio.calls.on.ims=1' /mnt/vendor/build.prop
adb shell sed -i -e '$a# end of file' /mnt/vendor/build.prop
:: FOR VOLTE CHECK, DIAL *#*#4636#*#*, PHONE INFORMATION - 3DOTS MENU - IMS SERVICE STATUS
::
:: Complete VoLTE settings:
::
:: # Debug Options
:: persist.dbg.ims_volte_enable=1
:: persist.dbg.volte_avail_ovr=1
:: persist.dbg.vt_avail_ovr=1
:: persist.dbg.wfc_avail_ovr=1
::
:: # Data Options
:: # Commented this line out as it was reported to break WiFi calling on some carriers.
:: # persist.data.iwlan.enable=true
::
:: # Radio Options
:: persist.radio.rat_on=combine (OR persist.vendor.radio.rat_on=combine)
:: persist.radio.data_ltd_sys_ind=1 (OR persist.vendor.radio.data_ltd_sys_ind=1)
:: persist.radio.data_con_rprt=1 (OR persist.vendor.radio.data_con_rprt=1)
:: persist.radio.calls.on.ims=1 (OR persist.vendor.radio.calls.on.ims=1)
:: For debugging purposes:
adb pull /mnt/vendor/build.prop
del /F _build.vendor.prop > nul 2>&1
ren build.prop _build.vendor.prop
echo.
echo done
echo.
pause
echo.
:: ------------------------------------------------------------
echo ------------------------------------
echo Proper unmount partitions...........
echo ------------------------------------
echo.
echo Terminal output will be displayed here:
adb shell umount /mnt/product
adb shell umount /mnt/system
adb shell umount /mnt/system_ext
adb shell umount /mnt/vendor
echo.
echo done
echo.
pause
echo.
:: ------------------------------------------------------------
echo ------------------------------------
echo Rebooting phone...
echo ------------------------------------
echo.
pause
adb reboot
For who wants to use some additional adb tweaks; it is possible to do this by enabling adb in your developer settings.
Here is the bat-file I am using (last changes 17/04/2023):
Code:
:: Moto G100 Tweak Script
:: Last modified 17-04-2023
:: Moto-J
:: ------------------------------------------------------------
@echo off
Setlocal EnableDelayedExpansion
color 0A
cls
echo MOTO G100 ADB TWEAK SCRIPT
echo.
echo IMPORTANT:
echo - Enable ADB in developer settings
echo - Connect phone and accept adb connection
echo.
pause
echo.
echo ------------------------------------
echo Connecting device...................
echo ------------------------------------
echo.
echo Terminal output will be displayed here:
adb devices
:: ------------------------------------------------------------
echo ------------------------------------
echo Running tweaks......................
echo ------------------------------------
echo.
echo Terminal output will be displayed here:
echo Enable privacy logging 7-day dashboard...
:: Enable privacy logging 7-day dashboard
adb shell device_config put privacy privacy_dashboard_7_day_toggle true
pause
echo Enable new combined safety center........
:: Enable new combined safety center
adb shell device_config put privacy safety_center_is_enabled true
pause
echo Enable DNS-over-HTTP3 support............
:: Enable DNS-over-HTTP3 support
adb shell device_config put netd_native doh 1
pause
echo Enable cached apps freezer...............
:: Enable cached apps freezer
adb shell device_config put activity_manager_native_boot use_freezer true
pause
echo Defer boot completed broadcasts..........
:: Defer boot completed broadcasts for background restricted apps
adb shell device_config put activity_manager defer_boot_completed_broadcast 2
pause
echo Enable separate notification slider......
adb shell device_config put systemui volume_separate_notification true
pause
echo.
echo Done!
echo.
:: ------------------------------------------------------------
echo ------------------------------------
echo Now reboot and disable adb again....
echo ------------------------------------
echo.
pause
adb reboot
You can enable adb and adb-root, run the script, reboot and afterwards disable adb again.
The settings will stay even after updating, so only running the script once is enough.
Also with a custom rom you want to update your firmware so now and then.
Luckily we can find the firmware for our phone here:
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
And here is the bat-file I am using with phone connected to PC in bootloader (last changes 15/04/2023):
Code:
:: Moto G100 Firmware Update Script
:: Last modified 15-04-2023
:: Moto-J
:: ------------------------------------------------------------
@echo off
Setlocal EnableDelayedExpansion
color 0A
cls
echo MOTO G100 FIRMWARE UPDATE SCRIPT
echo.
echo IMPORTANT:
echo - Connect phone to USB of PC
echo - Boot into bootloader
echo - Execute this BAT-file in directory with fastboot and latest firmware
echo.
pause
echo.
echo ------------------------------------
echo Connecting device...................
echo ------------------------------------
echo.
echo Terminal output will be displayed here:
fastboot devices
:: ------------------------------------------------------------
echo ------------------------------------
echo Updating firmware files.............
echo ------------------------------------
echo.
echo Terminal output will be displayed here:
fastboot flash modem_a NON-HLOS.bin
fastboot flash modem_b NON-HLOS.bin
fastboot erase mdmddr
fastboot flash fsg_a fsg.mbn
fastboot flash fsg_b fsg.mbn
fastboot erase mdm1m9kefs1
fastboot erase mdm1m9kefs2
fastboot flash bluetooth_a BTFM.bin
fastboot flash bluetooth_b BTFM.bin
fastboot flash dsp_a dspso.bin
fastboot flash dsp_b dspso.bin
fastboot flash logo_a logo.bin
fastboot flash logo_b logo.bin
fastboot erase carrier
fastboot erase ddr
echo.
echo done
echo.
pause
echo.
:: ------------------------------------------------------------
echo ------------------------------------
echo Rebooting phone...
echo ------------------------------------
echo.
pause
fastboot reboot
I am only flashing the neccessary stuff as radio and bluetooth and only that is erased what is needed for the update. No data is lost after update, no other tweaking needed.
On first reboot switch off your WiFi and wait a few seconds; carrier info will be updated from your provider and everything is working again. After that you can switch on your WiFi again ;-)
Additional some things which could improve your battery life (and data usage), although this is already great because of the large battery of the Moto G100....
Restrict battery usage in background for apps which do not need it:
go to apps, show all apps, per app, go to battery usage and switch to restricted
For the apps with restricted battery usage, I also switch of background usage of mobile data and VPN.
go to apps, show all apps, per app, go to mobile data and wifi and switch off background usage and VPN
Switch off mobile data for all apps which do not need an internet connections
same approach, though switch off complete network access. You can do this for several apps which you are using without the need of an internet connection like most barcode and QR scanners, file browsers, card storage apps, galery's etc...
In network settings - SIM cards - preferred network types, only select the network types you really need and which are optimised for your usage.
for me this is NR/LTE/GSM/WCDMA as I switch off mobile data at night with profile settings and want to be available by phone (GSM/WCDMA), though for most people only NR/LTE will probably even fit when you are using the VoLTE changes from the first posts and VoLTE is working ;-)
Set peak frequency for screen refresh to 60 Herz, not 90 Herz. 90 Herz is more fluent when scrolling, though for normal reading, internet usage etc... I see no need for 90 Herz and it will save your battery
Set the time-out for your screen as short as possible. I am using 1 minute and it is okay for me.
Enable double click on status or lock screen to enable sleep and really use it.
Use dark theme and black background, although we do not have a led screen, it is still saving battery
Disable location and bluetooth when you are not using it, enable wifi (only) when available.
Disable tick to activate, screensaver and fingerprint sensor swipe
Don't use full brightness, though try to set it that low as possible
Don't charge your phone to 100% every time, though try to keep the battery level between 30-80%.
This is also why I have set battery saving planning to a percentage of 30%.
When you don't need your email updated real time, disable push and only use getting POP3 email for example every hour.
Although I am using a script to remove system apps after an update, you can also disable some system apps you not need. Either way; try to disable as much as possible which is not neccessary for a good working phone.
That's it for now. When I have some additional ideas I will let you know!
Outside of banking apps & enabling volte. What do your other removal of packages and tweaks do? Can you give a general breakdown?
Timmons said:
Outside of banking apps & enabling volte. What do your other removal of packages and tweaks do? Can you give a general breakdown?
Click to expand...
Click to collapse
Sorry but you really have to check yourself.
There are several websites where the apps of Android are explained
The same counts for the build.prop settings.
I think it would be good to check yourself so you know what you are doing.
And even better... may be you will find other tweaks you can share with us!
Moto-J said:
Sorry but you really have to check yourself.
There are several websites where the apps of Android are explained
The same counts for the build.prop settings.
I think it would be good to check yourself so you know what you are doing.
And even better... may be you will find other tweaks you can share with us!
Click to expand...
Click to collapse
Fair enough. You'd mentioned to chmod after updating. Do I have to do that if I just run your bat file to update it? Sorry for the rookie questions as I'm no expert at linux scripts.
Timmons said:
Fair enough. You'd mentioned to chmod after updating. Do I have to do that if I just run your bat file to update it? Sorry for the rookie questions as I'm no expert at linux scripts.
Click to expand...
Click to collapse
No, not neccessary when you are using the script and edit the file by using adb this way.
No rights are modified that way.
Moto-J said:
No, not neccessary when you are using the script and edit the file by using adb this way.
No rights are modified that way.
Click to expand...
Click to collapse
I've updated the script to only update the build file without removing anything but it's not working. getting this below for system & vendor
Modifying /system/build.prop........
------------------------------------
Terminal output will be displayed here:
sed: /mnt/system/system/build.prop: No such file or directory
------------------------------------
Modifying /vendor/build.prop........
------------------------------------
Terminal output will be displayed here:
sed: /mnt/vendor/build.prop: No such file or directory
Timmons said:
I've updated the script to only update the build file without removing anything but it's not working. getting this below for system & vendor
Modifying /system/build.prop........
------------------------------------
Terminal output will be displayed here:
sed: /mnt/system/system/build.prop: No such file or directory
------------------------------------
Modifying /vendor/build.prop........
------------------------------------
Terminal output will be displayed here:
sed: /mnt/vendor/build.prop: No such file or directory
Click to expand...
Click to collapse
Hi @Timmons;
Could it be that you removed the first part of the bat file where the drives are mounted?
Could you therefor share the complete bat file you are using now, so I can actually check what is or could be wrong?
Moto-J said:
Hi @Timmons;
Could it be that you removed the first part of the bat file where the drives are mounted?
Could you therefor share the complete bat file you are using now, so I can actually check what is or could be wrong?
Click to expand...
Click to collapse
And what happens when you copy the lines to the command line one by one instead of using the bat file?
Could you for example try the following lines to check:
Code:
adb devices
adb shell mkdir /mnt/vendor
adb shell mount /dev/block/dm-9 /mnt/vendor
adb shell ls /mnt/vendor
You should see a directory listing (ls) of /mnt/vendor or an error message somewhere
Moto-J said:
And what happens when you copy the lines to the command line one by one instead of using the bat file?
Could you for example try the following lines to check:
Code:
adb devices
adb shell mkdir /mnt/vendor
adb shell mount /dev/block/dm-9 /mnt/vendor
adb shell ls /mnt/vendor
You should see a directory listing (ls) of /mnt/vendor or an error message somewhere
Click to expand...
Click to collapse
C:\Users\Home\Downloads\Motorola>adb shell mkdir /mnt/vendor
mkdir: '/mnt/vendor': File exists
C:\Users\Home\Downloads\Motorola>adb shell ls /mnt/vendor
C:\Users\Home\Downloads\Motorola>adb shell mount /dev/block/dm-9 /mnt/vendor
mount: '/dev/block/dm-9'->'/mnt/vendor': No such file or directory
C:\Users\Home\Downloads\Motorola>adb devices
List of devices attached
ZY22CCJ22P recovery
C:\Users\Home\Downloads\Motorola>adb shell mount /dev/block/dm-9 /mnt/vendor
mount: '/dev/block/dm-9'->'/mnt/vendor': No such file or directory
Not having much luck entering them manually.
Timmons said:
C:\Users\Home\Downloads\Motorola>adb shell mkdir /mnt/vendor
mkdir: '/mnt/vendor': File exists
C:\Users\Home\Downloads\Motorola>adb shell ls /mnt/vendor
C:\Users\Home\Downloads\Motorola>adb shell mount /dev/block/dm-9 /mnt/vendor
mount: '/dev/block/dm-9'->'/mnt/vendor': No such file or directory
C:\Users\Home\Downloads\Motorola>adb devices
List of devices attached
ZY22CCJ22P recovery
C:\Users\Home\Downloads\Motorola>adb shell mount /dev/block/dm-9 /mnt/vendor
mount: '/dev/block/dm-9'->'/mnt/vendor': No such file or directory
Not having much luck entering them manually.
Click to expand...
Click to collapse
Hmmm... it seems that your partitions are different as dm-9 is not known... strange ;-)
Could you try:
adb devices
adb shell ls /dev/block/dm*
Moto-J said:
Hmmm... it seems that your partitions are different as dm-9 is not known... strange ;-)
Could you try:
adb devices
adb shell ls /dev/block/dm*
Click to expand...
Click to collapse
C:\Users\Home\Downloads\Motorola>adb devices
List of devices attached
ZY22CCJ22P recovery
C:\Users\Home\Downloads\Motorola>adb shell ls /dev/block/dm*
/dev/block/dm-0 /dev/block/dm-3 /dev/block/dm-6
/dev/block/dm-1 /dev/block/dm-4 /dev/block/dm-7
/dev/block/dm-2 /dev/block/dm-5 /dev/block/dm-8
Timmons said:
C:\Users\Home\Downloads\Motorola>adb devices
List of devices attached
ZY22CCJ22P recovery
C:\Users\Home\Downloads\Motorola>adb shell ls /dev/block/dm*
/dev/block/dm-0 /dev/block/dm-3 /dev/block/dm-6
/dev/block/dm-1 /dev/block/dm-4 /dev/block/dm-7
/dev/block/dm-2 /dev/block/dm-5 /dev/block/dm-8
Click to expand...
Click to collapse
Ok, it seems you do not have dm-9, so indeed partitions are different.
What I have done to find out what is what is the following:
adb shell mkdir /mnt/tmpdir
adb shell mount /dev/block/dm-0 /mnt/tmpdir
adb shell ls mnt/tmpdir
Then you see what the content is of dm-0 so you know which dir it is
After that you can do
adb shell umount /mnt/tmpdir
adb shell mount /dev/block/dm-1
adb shell ls mnt/tmpdir
etc....
It seems you have to find the right setup for mounting the drives, after that you can slightly modify the script and use it for your phone.