How to unroot sony xperia tipo and tipo dual
steps
1.install sony pc companion
2.click on support zone
3.click on update phone
4.a message pop up already up to date but there is a link at bottom REPAIR YOUR PHONE click on it
5.follow steps that i will say
congratulation: you successfully unrooted your phone and now you are under warranty agan......i tried it on my sony xperia tipo dual for me its 101% working:angel: previously i had rooted and cwm recovery installed on itnow i have no cwm recovery and unrooted phone and under warranty......:angel::good:
any questions feel free to write me [email protected] or on my fb profile.............
HIT THANKS IF I HELPED YOU...........................
my boot loader is locked at that time
i ido't know will it work on unlocked bootloader?????
if any one tried this plz post..................
Easier method
hard91 said:
How to unroot sony xperia tipo and tipo dual
steps
1.install sony pc companion
2.click on support zone
3.click on update phone
4.a message pop up already up to date but there is a link at bottom REPAIR YOUR PHONE click on it
5.follow steps that i will say
congratulation: you successfully unrooted your phone and now you are under warranty agan......i tried it on my sony xperia tipo dual for me its 101% working:angel: previously i had rooted and cwm recovery installed on itnow i have no cwm recovery and unrooted phone and under warranty......:angel::good:
any questions feel free to write me [email protected] or on my fb profile.............
HIT THANKS IF I HELPED YOU...........................
Click to expand...
Click to collapse
If you used the One-Click method then there's an easier method.
Open the SuperSU app and go to Settings-->Full unroot
kashyapha1994 said:
If you used the One-Click method then there's an easier method.
Open the SuperSU app and go to Settings-->Full unroot
Click to expand...
Click to collapse
Yes, it's true.
thank you so much
kashyapha1994 said:
If you used the One-Click method then there's an easier method.
Open the SuperSU app and go to Settings-->Full unroot
Click to expand...
Click to collapse
sir i did that but
i downloaded a software that say root is unlocked
Hi i root my sony xperia tipo dual and then i installed bit installer and bravia engine but after that my phone speeker dont work
What should i have to do i need help ......i also reset my phone
Sent from my ST21i2 using xda app-developers app
viRaat said:
Hi i root my sony xperia tipo dual and then i installed bit installer and bravia engine but after that my phone speeker dont work
What should i have to do i need help ......i also reset my phone
Sent from my ST21i2 using xda app-developers app
Click to expand...
Click to collapse
Follow this method, it should work then
Hit Thanks if I helped you!
may be work .....
viRaat said:
Hi i root my sony xperia tipo dual and then i installed bit installer and bravia engine but after that my phone speeker dont work
What should i have to do i need help ......i also reset my phone
Sent from my ST21i2 using xda app-developers app
Click to expand...
Click to collapse
use this method it will work for you....................
and if worked then hit thanks and comment it................
Help with my sony Xperia Miro , screen keeps flashing on and off when i flashed Rom
When i flashed my rooted xperia miro with a paranoid android rom xperia j rom
it loaded into a CWM recovery and the menu colour inverted and the screen keeps flashing on and off and the
the touch isnt working plsss help :,( i ccant use my phone at all
Jude764 said:
When i flashed my rooted xperia miro with a paranoid android rom xperia j rom
it loaded into a CWM recovery and the menu colour inverted and the screen keeps flashing on and off and the
the touch isnt working plsss help :,( i ccant use my phone at all
Click to expand...
Click to collapse
Flash miro .ftf via flashtool.
Sent from my ST23i
let's make it easier...
if superuser has been a system app, remove it then install superuser as normal app (will be a user app).
then, just delete su.bin on /system/bin
that's it.... now you're unrooted
yayakuya said:
let's make it easier...
if superuser has been a system app, remove it then install superuser as normal app (will be a user app).
then, just delete su.bin on /system/bin
that's it.... now you're unrooted
Click to expand...
Click to collapse
True, but in most cases you leave some other libs/bins this way, like the busybox one.
Doesn't the superuser app have the "permanent unroot" button somewhere?
Regards, Drago
Download unlockroot program. Connect your phone and press the unroot button.
Also if you still doubt about some files, then just flash your corresponding ftf via flashtool.(you can also use pc companion if BL is locked)
I have done that many times.
Sent from my ST23i
Related
Root and CWM for Xperia J Finally!
Thanks to srl3gx and Bin4ry for their awsome work!
and ME for taking risk!
Make sure u are in 11.0.A.3.28 or 11.0.A.3.18 firmware ALONE with Locked Bootloader..
This method Dosent Work on 11.0.A.7.5 Firmware! (working on it! )
for .28 firmware download from here and flash it
if u dont have a flash tool download it from here for windows and install drivers located in C:\Flashtool\drivers (choose all drivers)
since flash tool does not have xperia j drivers..u may hav flashing problem...for that
1.download and extract d ST26.zip ive uploaded
2.open flash tool
3.click devices>import
4.navigate to d file u've extracted
5.now xperia j driver is installed
u can now flash without problems
Now back to rooting...
Root first! thn apply CWM!
Steps for Rooting:
1.extract Root_J.zip
2.make sure 'usb debugging' is enabled in devolpment settings
3.double click Runme.bat file for windows users...runme.sh for linux users
4.wait for process to finish (mostly should work)
Steps for CWM:
1.extract CWM_J.zip
2.'usb debugging' on
3.double click 'install.bat' only for windows (linux not working! my bad..)
4.wait for it.....installed! close the shell program and switch off the phone..
Plug in charger or USB....the phone switches on....press up and down volume keys repeatedly when SONY logo flashes.....voila u get into CWM!
You need plugged in charger or USB to goto CWM! Else CWM wont Work!!
reboot to system and see if supersu is installed finish! ur phone is rooted and cwm is installed !!
CWM has little bugs ..but its a never mind stuff..
use arrow keys to navigate..power button to select and 'go back' option in cwm itself to go to previous options.
Comment if it worked for you...let others know!
Tested on my xperia J and Miro
Dont restore factory setting or else CWM will vanish...n u hav to reflash whole firmware again
for questions and problems ask srl3gx
HOPE I HELPED...hit thanks
Sorry for the last update! It Dindn't Work for many devices!
wow finally it arrived.
Anyone tried this already?
Sent from my ST26i
Yes dude I tested it.. It works... That's y i posted it
Sent from my ST26i using xda premium
kishenpj21 said:
Yes dude I tested it.. It works... That's y i posted it
Sent from my ST26i using xda premium
Click to expand...
Click to collapse
Followed your instructions on my Experia J. I have build 11.0.A.3.18 (UK on orange/EE). I decided against flashing to 3.28 and to try with 3.18, but to get the Flashtool working I did the following:
Once the ST26.zip file is extracted (using Winrar) I then have to open this extracted file again in WinRar to get the files that should live at C:\Flashtool\devices\ST26 (loader.sin etc.). I then had to copy the original file ST26.ftd to c:\Flashtool\devices. I enabled USB debugging in the Developer settings on the phone and Flashtool started working properly.
I was able to root and CWM the device as per your instructions on buiild 11.0.A.3.18. Cheers.
The major problem with this CWM method is that it's designed for the Tipo, so when you try to flash a zip made for jlo, it fails. I had to remove the assert from the top of the scrip to flash with this.
Thanks for trying on .18 firmware... I'll update d thread
Sent from my ST26i using xda premium
adfad666 said:
The major problem with this CWM method is that it's designed for the Tipo, so when you try to flash a zip made for jlo, it fails. I had to remove the assert from the top of the scrip to flash with this.
Click to expand...
Click to collapse
Dude dunno y u have problems with CWM...btr to flash according to my instructions... It works for many
Sent from my ST26i using xda premium
kishenpj21 said:
Dude dunno y u have problems with CWM...btr to flash according to my instructions... It works for many
Sent from my ST26i using xda premium
Click to expand...
Click to collapse
Have you tried flashing a compiled ROM? It fails as the CWM thinks it's on a Tipo device.
Plus if you wipe your system partition, you lose CWM, it's not a good solution. I've posted a CWM as a boot.img in my CM10 thread
adfad666 said:
Have you tried flashing a compiled ROM? It fails as the CWM thinks it's on a Tipo device.
Plus if you wipe your system partition, you lose CWM, it's not a good solution. I've posted a CWM as a boot.img in my CM10 thread
Click to expand...
Click to collapse
Oh..ok.. But this post is for original firmware rooting n CWM... Won't work for custom roms
Sent from my ST26i using xda premium
kishenpj21 said:
Oh..ok.. But this post is for original firmware rooting n CWM... Won't work for custom roms
Sent from my ST26i using xda premium
Click to expand...
Click to collapse
OK, plus this will work for people who cannot unlock their bootloader. But perhaps you should put a warning as some people may want to wipe their system partition before they restore a backup (which will work) but if they for what ever reason try to reboot the phone they will be lost and will have to restore via flashtool!
thanks for report...updatd
very good work thx!
It's recovery from Tipo thus works like work: (
Pacjonek said:
It's recovery from Tipo thus works like work: (
Click to expand...
Click to collapse
sorry! cant get u!
Is this works with unlocked bootloaders '?
Sent from my ST26i using xda app-developers app
rachit7 said:
Is this works with unlocked bootloaders '?
Sent from my ST26i using xda app-developers app
Click to expand...
Click to collapse
Ya wil wrk but y do u want to unlock boot loader... Ready to lose warranty???
Sent from my ST26i using xda premium
I've updated my xperia j to firmware 11.0.A.7.5 and now i can't root it with this method...
Any help?
Yea im the same 11.0.A.7.5 cant you flash the phone with older firmware?
Okay i flashed that firmware from first page and now my phone is rooted thanks alot
If we can get ftf file of 11.0.A.7.5 firmware and flash it with Flashtool without wiping data (just wiping cache) maybe we don't loose root... but where can we found that ftf file???
I Was trying to install chainfire 3D it's restarting my mobile
and didn't open again
i tried to flash a rom by flash tool but i can't
A7medLSayed said:
I Was trying to install chainfire 3D it's restarting my mobile
and didn't open again
i tried to flash a rom by flash tool but i can't
Click to expand...
Click to collapse
why cant u flash with flashtool?
if your bootloader is still locked try to restore with pc companion or seus
Please explain a little more about your device status and the current issue bro,
Hit the thanks button instead of telling it....
thank you
sent from my Xperia E dual C1604..
A7medLSayed said:
I Was trying to install chainfire 3D it's restarting my mobile
and didn't open again
i tried to flash a rom by flash tool but i can't
Click to expand...
Click to collapse
You mean after reboot, you can see sony screen and got black screen after. If using flashtool, get any .ftf that you like, install the drivers first, then flash it. Remember, only connect the phone when flashtool ask you to. If youre still on locked bootloader, pc companion - repair would be easier.
Sent from [MY-PRK-MJG] Awesome Paradox Tipo ST21i
my xperia tipo stucks at sony logo.. pc doesn't recognizes it. what should i do now???
ashishsaini281 said:
my xperia tipo stucks at sony logo.. pc doesn't recognizes it. what should i do now???
Click to expand...
Click to collapse
this is bootloop....what did you do before it happens?
Sent from my Xperia Tipo using xda app-developers app
xrhstospro said:
this is bootloop....what did you do before it happens?
Sent from my Xperia Tipo using xda app-developers app
Click to expand...
Click to collapse
i was trying to flash gimlo from recovery mode and after Formatting system partition and data partition. there was no gimlo rom which i copied to sd card therefore i decided to copy it in ext. card but after that phone stucks at sony logo.
now you dont have cwm recovery...dont panic your device dont bricked, just your firmware is missing...do you have unlocked bootloader?
Sent from my Xperia Tipo using xda app-developers app
If it helps, in the past I got your same issue with Gimlo, press vol- and power button and your phone should vibrate... then boot it and try to enter cwm, I did it and worked for me
If it doesn't work flash stock .ftf with flashtool
gamer649 has helped me.. and now my phone is working. anyway thanks everybody
Lol, just use 'choose zip from external memory'
Sent from my Xperia Miro using xda premium
tipo sony logo bricked
Ketcchup said:
If it helps, in the past I got your same issue with Gimlo, press vol- and power button and your phone should vibrate... then boot it and try to enter cwm, I did it and worked for me
If it doesn't work flash stock .ftf with flashtool
Click to expand...
Click to collapse
it doee,t work for me same situation plz help me what i can do.......nd srry my english is bad lol plz reply soon
rahuonway said:
it doee,t work for me same situation plz help me what i can do.......nd srry my english is bad lol plz reply soon
Click to expand...
Click to collapse
Bro, Try repairing your phone via SONY Update Service(SUS)
This Is the simplest way to get ur phone back to work!
Here Are the links-
(It Will Flash The Stock ROM But That Is Not A Problem You Can Flash your Custom ROM again)
Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymob...-2.11.12.5.exe
Hit thanks if i helped..
[This will work 99.99% but still if can not bring ur phone back to work download flashtool and flash your device's ftf!]
Don't simply Flash Stock ICS With Flashtool Then your Tipo will be fixed
Hi...
A new update is now available for Sony Xperia E C1505 device. The new software update is namely version 11.3.A.2.13.
Based on Android 4.1.1 Jelly Bean
This Root methode only for Unlocked Bootloader Device
* Tick on Unknown source (Go to setting-security)
* Tick on USB Debugging (Setting-dev options)
* Download flashtool (http://www.flashtool.net/download.html)
* Download kernel+CWM for 11.3.A.0.47 (http://forum.xda-developers.com/showthread.php?t=2276943)
* Download SuperSU (http://forum.xda-developers.com/showthread.php?t=1538053)
or you can download superuser (http://androidsu.com/superuser/) (but i prefer superSU)
* Extract kernel.sin (from 11.3.A.2.13) then make it to ftf file with flashtool
if you dont have any ftf you can download over here (http://forum.xda-developers.com/showthread.php?t=2409632) or download this kernel ftf (https://mega.co.nz/#!lQ4wWLjI)
Usage instructions
Flash kernel A.0.47 +cwm boot to fastboot with script :
Code:
fastboot flash boot <filename>.elf
or direct via flashtool (fastboot mode-select kernel to flash-reboot device into system)
Reboot and press Vol Up (you will enter CWM Recovery)
Flash zip SuperSU
Format cache and Wipe Dalvik then reboot
Turn off then boot to fastboot and flash again new kernel A.2.13
Reboot and Enjoy so you can throw every bloatware apk
Note :
if you come from another way rooted this new firmware, i suggestion you to flash again your firmware first then follow my instructions
No More Lag after root tested by me
Credit :
Thanks to androxyde n friends for Flashtool
Thanks to jjm34 for kernel A.0.47 +cwm
Thanks to Chainfire for SuperSU
Thanks to UltraGamerHD for ftf
Thanks to all xda member
I have a lot of lag with this method...
EDIT: This works pretty good... I did the same workaround but then with Superuser flashable zip. But with SuperUser, i have no lag... Thx!
Jeefff said:
I have a lot of lag with this method...
EDIT: This works pretty good... I did the same workaround but then with Superuser flashable zip. But with SuperUser, i have no lag... Thx!
Click to expand...
Click to collapse
i dont get whts your point buddy ??
you meant u used flashable SuperSU or Superuser make it no lag ?
If i use Superuser to root. I have lag. But with SuperSU there is no lag.
Sent from my C1505 using xda app-developers app
Jeefff said:
If i use Superuser to root. I have lag. But with SuperSU there is no lag.
Sent from my C1505 using xda app-developers app
Click to expand...
Click to collapse
yuhuuUu, enjoy:good:
It works!!!
Many thanks.
shnitzel said:
It works!!!
Many thanks.
Click to expand...
Click to collapse
yeaahh bro
enjoy
Hmm, after a day of testing it, the phone hangs sometimes.. I need to remove the battery te reboot the phone. I'm back on 11.3.A.0.47
Jeefff said:
Hmm, after a day of testing it, the phone hangs sometimes.. I need to remove the battery te reboot the phone. I'm back on 11.3.A.0.47
Click to expand...
Click to collapse
Wow??
Im not dude, I think faster than b4
Hi,
I have rooted and unlocked bootloader for my xperia e, should update to the new firmware? If I do will it cause any complications?
Sent from my C1505 using xda app-developers app
zolt94 said:
Hi,
I have rooted and unlocked bootloader for my xperia e, should update to the new firmware? If I do will it cause any complications?
Sent from my C1505 using xda app-developers app
Click to expand...
Click to collapse
Is up to you buddy
But I suggest you to upgrde new firmware cz sony has improved more features on xperia e
If you unlocked bootloader so dont use PCC or SUS to upgrade your firmware, you must be on locked bootloader then upgrade. Via PCC/SUS
Or stay unlocked then upgrade via flashtool
Enjoy
it shows..the devive must be rooted first...and ...please check the log level
Jeefff said:
I have a lot of lag with this method...
EDIT: This works pretty good... I did the same workaround but then with Superuser flashable zip. But with SuperUser, i have no lag... Thx!
Click to expand...
Click to collapse
Use cydiaimpactor software to root no need to change kernel anything one click root tool
http://forum.xda-developers.com/showpost.php?p=45221991
sidrock622 said:
Use cydiaimpactor software to root no need to change kernel anything one click root tool
http://forum.xda-developers.com/showpost.php?p=45221991
Click to expand...
Click to collapse
Hmm thx
How about new firmware a.2.23 does it work too?
frey.derico said:
Hmm thx
How about new firmware a.2.23 does it work too?
Click to expand...
Click to collapse
nope, i had to use the kernel trick on my .23 version
Hello,
i am using xperia miro 4.0.4 stock rom,rooted,boot loader lockd,
i just install xperia Z home link: http://forum.xda-developers.com/show....php?t=2242606 with Method 1:The first method of the installation of the Home is [ Put Home.apk// System/ app/ rw permission]
after i done it when i restart my phone in show "Android is upgreading" and device i cant load home screen or anything. i have to remove battery other wise it's not stop.
usb debugging is off
what should i do now for start my phone?
i install Emma from sony's site,i dont get activation email from emma so i cat use it
Did you have any backups? If yes then you can restore "system" from recovery mode.
If you did not have recovery then download ftf for Miro, and flash it via flashtool.
Forget about emma!
All the best.
Sent from my ST23i
c4cyro said:
Did you have any backups? If yes then you can restore "system" from recovery mode.
If you did not have recovery then download ftf for Miro, and flash it via flashtool.
Forget about emma!
All the best.
Sent from my ST23i
Click to expand...
Click to collapse
thanx for help, now its work fine
krushn said:
thanx for help, now its work fine
Click to expand...
Click to collapse
great :thumbsup: