[Q] System failure boots only in recovery - Galaxy 3 Q&A, Help & Troubleshooting

hi everyone. I have been facing a very serious issue with my g3. I have seen this since a few days in all the roms and kernels i have used after booting up in recovery mode i cant later on boot up normally after it. Every time the phone boots up only in recovery mode thereafter. Please help. I also checked up all the filesystem required for the the desired kernel even they are correct. This also happens in the stock samsung kernel as well. The kernel and rom configs i have used are as follows:-
1)G3mod oc final + stock rom
2)G3Mod oc 2.4.1 + stock rom
3) G3Mod OC 2.4.1+Kyorarom OC
4)Kyrollis Rom
5)MIUI v4 port for G3
6)Pranjals Rom
7)AOKP jelly bean rom.
8)Stock kernel+Stock rom
9)Stock kernel+Destiny 2.0
PLEASE HELP!!!
I have been unable to flash the roms as well sometimes.
Please help me on what to do now.

varishtg said:
hi everyone. I have been facing a very serious issue with my g3. I have seen this since a few days in all the roms and kernels i have used after booting up in recovery mode i cant later on boot up normally after it. Every time the phone boots up only in recovery mode thereafter. Please help. I also checked up all the filesystem required for the the desired kernel even they are correct. This also happens in the stock samsung kernel as well. The kernel and rom configs i have used are as follows:-
1)G3mod oc final + stock rom
2)G3Mod oc 2.4.1 + stock rom
3) G3Mod OC 2.4.1+Kyorarom OC
4)Kyrollis Rom
5)MIUI v4 port for G3
6)Pranjals Rom
7)AOKP jelly bean rom.
8)Stock kernel+Stock rom
9)Stock kernel+Destiny 2.0
PLEASE HELP!!!
I have been unable to flash the roms as well sometimes.
Please help me on what to do now.
Click to expand...
Click to collapse
As I understand even if you don't press any combo button phone boots up into recovery? If yes I think I may chaeck if everything is alright with your buttons

Works well now
DoR2 said:
As I understand even if you don't press any combo button phone boots up into recovery? If yes I think I may chaeck if everything is alright with your buttons
Click to expand...
Click to collapse
i reflashed the phone with kyorarom again n everything seems to work well now. Anyways thanks

Related

[Q] Kernel Flashing..

I'm running into a problem with flashing kernels, for example the ktoon kernel will say it's flashed however the phone only shows the word Samsung then dies. any ideas? sorry for potentially reposting something already discussed.
renesoul said:
I'm running into a problem with flashing kernels, for example the ktoon kernel will say it's flashed however the phone only shows the word Samsung then dies. any ideas? sorry for potentially reposting something already discussed.
Click to expand...
Click to collapse
What ROM are you on?
Sent from my SCH-I535 using xda app-developers app
Sounds like you're flashing the wrong kernel version or one that is incompatible with new ROM code.
jakereeves31 said:
What ROM are you on?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I was trying to flash liquidsmooth rom, the newest available, and that wouldn't boot either which I'm guessing is because it didn't run on a stock kernel. But when i was trying in the OP i was trying Galaxy Mod rls 7 and it wouldn't get past the first Samsung boot screen whenever i would chose ktoon kernel but would work whenever stock kernel was chosen
Zalithian said:
Sounds like you're flashing the wrong kernel version or one that is incompatible with new ROM code.
Click to expand...
Click to collapse
That's possible but both kernels were provided by the rom itself so is it that likely?
renesoul said:
That's possible but both kernels were provided by the rom itself so is it that likely?
Click to expand...
Click to collapse
When certain merges are incorporated into a ROM, it is required that the kernel has that same code, or it will make the phone unable to get past the boot screen. If it's not working with the kernels provided by the ROM, then maybe you have some bad downloads, or an unfortunately special phone.
I think i might be having this problem also?
I had the latest stable version of CM10 and using EZ Recovery, i flashed the hybrid invisiblek and tried to reboot into recovery. Now all my phone does is flash the Samsung logo, then the Samsung Galaxy SIII logo and then stays black with the navigation buttons lit up. I can't seem to boot into any recovery mode by holding the power, home and volume up buttons.
Not sure how to fix this. Any help would be appreciated!
TwoGunsABlazin said:
I think i might be having this problem also?
I had the latest stable version of CM10 and using EZ Recovery, i flashed the hybrid invisiblek and tried to reboot into recovery. Now all my phone does is flash the Samsung logo, then the Samsung Galaxy SIII logo and then stays black with the navigation buttons lit up. I can't seem to boot into any recovery mode by holding the power, home and volume up buttons.
Not sure how to fix this. Any help would be appreciated!
Click to expand...
Click to collapse
You're hosed until you replace the ICS-based kernel (invisiblek hasn't come out with v3 yet - for one reason there's no source code, yet) on a JB-based ROM. Use Odin to flash a new recovery (CWM 6.0.1.2 works well) until somebody comes out with a Jelly Bean compatible kernel.
I'm told that K747 works, but I haven't tried it. By the way: read the dox a little better: if you use invisiblek's KEXEC-based kernel, then you don't have a recovery to boot into - until you flash over it. (again, I'm told you can from ADB, but I haven't tried it).

HELP! Phone won't turn on

I was flashing air kernel with cwm and succeded, but when i rebooted afrer flashing, the phone won't get to Google logo. I flashed Blue color + 65 fps HELP PLEASE
Nexus S, stock jelly bean 4.1.2, rooted, tried to flash air kernel..
Please someone reply. After the Google logo, the phone just goes blank... tried a battery pull and nothing..
matejilic said:
I was flashing air kernel with cwm and succeded, but when i rebooted afrer flashing, the phone won't get to Google logo. I flashed Blue color + 65 fps HELP PLEASE
Nexus S, stock jelly bean 4.1.2, rooted, tried to flash air kernel..
Please someone reply. After the Google logo, the phone just goes blank... tried a battery pull and nothing..
Click to expand...
Click to collapse
can u still go into recovery ??
power + volume up
ahmadalraii said:
can u still go into recovery ??
power + volume up
Click to expand...
Click to collapse
yes, i can. I tried to flash Matr1x kernel, reflash Air and flash AOKP milestone 1, situation is the same, it shows only the google logo, after that i can see nothing, blank screen..
did u try a whole new combo..
try hellybean rom 4.2 with airkernel..
not all roms works with all kernels some roms have thier own kernels like cm
is your problem that u want this specific rom to boot and u have tried many kernels and stuck in bootloops
or ur phone is not working with any rom ? and any kernel >?
be carefull if flashed a jelly bean rom to flash a jellybean kernel ..or hust try to boot with the provided kernel with the zip rom
Wipe data in CWM. Make a backup first.
Factory reset and wipe data,cache before trying it again.
Sent from my Nexus S
ahmadalraii said:
did u try a whole new combo..
try hellybean rom 4.2 with airkernel..
not all roms works with all kernels some roms have thier own kernels like cm
is your problem that u want this specific rom to boot and u have tried many kernels and stuck in bootloops
or ur phone is not working with any rom ? and any kernel >?
be carefull if flashed a jelly bean rom to flash a jellybean kernel ..or hust try to boot with the provided kernel with the zip rom
Click to expand...
Click to collapse
my phone worked with stock. Then i tried to flash air kernel to stock rom to increase performance, but i got stock in bootloop i guess (wont go past the google logo..)
seibott said:
Factory reset and wipe data,cache before trying it again.
Sent from my Nexus S
Click to expand...
Click to collapse
tried multiple cache wipes/ dalvik cache wipes and factory resets.. i guess i'll try to flash stock image from google in hope to fix it...
i managed to flash cm 10 on my nexus s and it fixed all the problems. thank you for your help guys, cheers!
matejilic said:
i managed to flash cm 10 on my nexus s and it fixed all the problems. thank you for your help guys, cheers!
Click to expand...
Click to collapse
cheers ...:laugh:

Change Kernel on JellyBam v4.1.0

As I said: I was wandering if it is possibile to change kernel, I tried this one, installed with aroma, but my Sensation is stuck in a bootloop.
I'm S-on, I tried to flash either with and without the 4ext smart flash with the same result.
Anyone has a solution?
Fulvio93 said:
As I said: I was wandering if it is possibile to change kernel, I tried this one, installed with aroma, but my Sensation is stuck in a bootloop.
I'm S-on, I tried to flash either with and without the 4ext smart flash with the same result.
Anyone has a solution?
Click to expand...
Click to collapse
flash the boot.img of the rom manually
see here how
http://forum.xda-developers.com/showthread.php?t=1631861 (only extra 1step)
otherwise flash another kernel
which kernel did you use?
rzr86 said:
flash the boot.img of the rom manually
see here how
http://forum.xda-developers.com/showthread.php?t=1631861 (only extra 1step)
otherwise flash another kernel
which kernel did you use?
Click to expand...
Click to collapse
Sorry! I forgot to past the link and then I had to wait five minutes to edit my post and, well, I forgot again.
This is the kernel: http://forum.xda-developers.com/showthread.php?t=1216197 I don't really need it but I would have tried some oc and the sweep2wake function and stuff, so, any other kernel (or even the rom one, if it's possible to set it) is the same to me.
Just to tell you: I flashed Jellybam after a full wipe, and it was working, then flashed the kernel, then, when I got stuck in the bootloop I flashed Jellybam again without wiping, right now all works properly.
Fulvio93 said:
Sorry! I forgot to past the link and then I had to wait five minutes to edit my post and, well, I forgot again.
This is the kernel: http://forum.xda-developers.com/showthread.php?t=1216197 I don't really need it but I would have tried some oc and the sweep2wake function and stuff, so, any other kernel (or even the rom one, if it's possible to set it) is the same to me.
Just to tell you: I flashed Jellybam after a full wipe, and it was working, then flashed the kernel, then, when I got stuck in the bootloop I flashed Jellybam again without wiping, right now all works properly.
Click to expand...
Click to collapse
That kernel is NOT designed for AOSP Jelly Bean ROMs like JellyBAM. That kernel is designed for Sense Ice Cream Sandwich ROMs, so it's to be expected that your phone won't boot after flashing that over JellyBAM. If you want a kernel to use with JellyBAM that has all the features that you just mentioned (Sweep2Wake, OC, etc.) then try my kernel (Sultan kernel). The thread is here: http://forum.xda-developers.com/showthread.php?t=2035897
android1234567 said:
That kernel is NOT designed for AOSP Jelly Bean ROMs like JellyBAM. That kernel is designed for Sense Ice Cream Sandwich ROMs, so it's to be expected that your phone won't boot after flashing that over JellyBAM. If you want a kernel to use with JellyBAM that has all the features that you just mentioned (Sweep2Wake, OC, etc.) then try my kernel (Sultan kernel). The thread is here: http://forum.xda-developers.com/showthread.php?t=2035897
Click to expand...
Click to collapse
Yeah well, I was looking at the title of that kernel thread while I realized which was the problem, I'm glad to tell you that I flashed your kernel last night (I'm Italian) and after a whole day using it I have to say that I really like it (even if I've to settle with all the differences between the governors and the best way to set them with aroma).
Thank you!

[Q] Xperia L kitkat wifi not work

Hello,
I'm running this custom rom and first i tried use the kernel Phantom-Kernel-v12 and after i tried the kernel ThunderZap, but the bolth kernels the wifi don't work.
Someone can help me?
thiagothomaz said:
Hello,
I'm running this custom rom and first i tried use the kernel Phantom-Kernel-v12 and after i tried the kernel ThunderZap, but the bolth kernels the wifi don't work.
Someone can help me?[/QUOI
Its a common thing when you first time flash kernel.
My solution. (and it works)
Flash kernel true flash tools.... ( thunder icon then flash fastboot then flash kernel.....you must extract the kernel zip then flash only his ,,boot.img,,)
IMPORTANT: BEFORE WHIPPING YOUR ROM PUT YOUR ZIP KERNEL FOLDER INTO YOUR INTERNAL DATA!!!
When you flash the kernel turn on your phone...wait while LED lamp is on then start tapping or hold volume button up on your phone.
Then you will enter into recovery.
True recovery flash new custom rom.....
When ROM install you wont have wi fi (not yet)
SOLUTION PART: Turn off your phone again then on,enter recovery and FLASH KERNEL AGAIN!!!
FIXED!
Click to expand...
Click to collapse
vuk030 said:
thiagothomaz said:
Hello,
I'm running this custom rom and first i tried use the kernel Phantom-Kernel-v12 and after i tried the kernel ThunderZap, but the bolth kernels the wifi don't work.
Someone can help me?[/QUOI
Its a common thing when you first time flash kernel.
My solution. (and it works)
Flash kernel true flash tools.... ( thunder icon then flash fastboot then flash kernel.....you must extract the kernel zip then flash only his ,,boot.img,,)
IMPORTANT: BEFORE WHIPPING YOUR ROM PUT YOUR ZIP KERNEL FOLDER INTO YOUR INTERNAL DATA!!!
When you flash the kernel turn on your phone...wait while LED lamp is on then start tapping or hold volume button up on your phone.
Then you will enter into recovery.
True recovery flash new custom rom.....
When ROM install you wont have wi fi (not yet)
SOLUTION PART: Turn off your phone again then on,enter recovery and FLASH KERNEL AGAIN!!!
FIXED!
Click to expand...
Click to collapse
Thanks for the reply. I tried, but with the ThunderZap Kernel yet not work. And the phantom kernel v 12 don't have any ".img".
I find this "solution" http://forum.xda-developers.com/showpost.php?p=50757236&postcount=244 but don't have the folder "/system/lib/modules/prima/".
any other tips?
Click to expand...
Click to collapse
thiagothomaz said:
Hello,
Someone can help me?
Click to expand...
Click to collapse
Using Kitkat roms required 4.2 stock to get wifi works..
Make sure you're came from that firmware

[Q] My Nuxes 5 does not work after flash the franco kernel, help please

Dears,
I have nexus 5 with open bootloader + Recovery clockwork-6.0.4.4 + root + MIUI V5 custom Rom
because the lag and the hate of my phone especially when Turn on 3G data, I decided to change the kernel to custom kernel
then I used the franco kernel r63 from this post
http://forum.xda-developers.com/google-nexus-5/orig-development/kernel-franco-kernel-r53-t2508284
I used the "franco.Kernel updater Free App" to download the latest update and flash it
but after that the nuxes 5 didn't work, still stock on the logo of Rom !!
I tried to install the stock kernel from this link boot-4.4.1 by "fastboot flash boot" command but still same problem
and also I tried to install the Trinity Kernel "T5-4.4.2-B10" by flashboot command and still same problem,
and tried to re flash the Zip file of MUIU Rom, but nothing new, same problem stock on the logo picture of Rom when start !
any help please ?
I want to install the franco kernel with my MIUI Rom, even if the solution will remove all my App & data no problem !
none of those kernels are miui compatible. what you have to do is either flash the miui kernel(or compatible) or just reflash miui dirty(don't wipe anything).
Or just flash away from MIUI to get rid of your lag problem.
simms22 said:
none of those kernels are miui compatible. what you have to do is either flash the miui kernel(or compatible) or just reflash miui dirty(don't wipe anything).
Click to expand...
Click to collapse
simms22
Many thanks for you, I change the kernel and used this "Silean Kernel Nexus 5", which is compatible with MIUI rom, and My Nexus 5 go a way from last problem ! Thanks again. :good:
SilkyJohnson said:
Or just flash away from MIUI to get rid of your lag problem.
Click to expand...
Click to collapse
Thanks for your Idea, this is my first time with this rom and I found it Good if the new kernel will solve these two problems ! I hope or I will get new Rom ! do you recommend any new good Rom ?!
Nuxes 5
Sent from my Nexus 5

Categories

Resources