I've got this, it's almost perfect appart from it covering the speaker on the back of the phone, you don't have to push the phone flat against the mount though so it's fine. No jiggling, very stable. I also have an NFC tag stuck to the back of it and the N4 can read the tag through it just fine.
http://www.amazon.co.uk/gp/product/B007Y94CPO
Now I just need to find a car charger that will charge it while Navigation is running. The 1A Belkin one I have charges it fine, but not while Navigation is running
Related
Either my one s sucks too much power or my car charger sucks.....
I almost always have bluetooth music streaming+google music and navigation on at the same time and the charger I have doesn't seem to be able to charge the battery fast enough as the percentage drops over time..
This used to be fine with my g2 but no so with my one s....
from this discussion http://forum.xda-developers.com/showthread.php?t=1224707&highlight=car+charger the motorola universal micro usb car charger has resulted to be the best around, indeed I have taken one and I'm very sadisfied with it, It should be named motorola P513. It change faster than any car charger that I have ever had and it's fit perfectly!
So, I ordered the Air Dock 2.0 for my S6. I want to do a full review with pictures, which I will add when I get a few more minutes, but I wanted to give a quick first impression before that.
As a dock, the nano foam surface works as described. As long as you have a glossy finish on your phone (either the phone itself, a glossy, flat case, or the sticker that they provide) it has an amazingly strong grip. However, if you have a rubberized case like I do (I currently have the Incipio Dual Pro), it does not hold it at all. Which is as advertised, so while I was just a little bit disappointed, I wasn't heartbroken. So, I slapped the sticker on the back (which is actually just a little bit wider than the case so it overlaps on the sides of the case by a little less than an 1/8"), and it worked perfectly. You do have to apply just a little bit of pressure to get it to really grab hold of the phone, regardless of whether you are using a naked phone or the sticker. You can't be delicate with the phone when you are attaching it to the dock. The one thing I wasn't overly impressed with was the sturdiness of the actual mount/arm. I bought the textured surface mount because I was hoping I could use it on the lower part of my dash under the radio which has a textured surface (I have a 2012 GMC Sierra without the center console). It did hold fine when I finally found a flat enough spot to attach it to. However, regardless of whether I had it mounted to the dash or the window, there is a lot of shake in the arm (again i bought the standard textured surface variety, not the long flexible variety). I believe the ball is a standard ball like most mounts have, so I may test fit another mount that I have to see if that improves things.
As a charger, I feel it leaves a lot to be desired. I used the Ampere app to monitor the charging voltage. While sitting still, it charges at about 380mA. However, while driving down the road, I noticed that every time I hit a bump and the mount shook, the charging would sometimes drop down to as low as 80mA. It never chirped to say that it disconnected from wireless charging, but it got very low. I have to wonder if the constant shaking of the mount arm could cause the charging coils on the charger and the coils on the phone to go out of alignment and reduce teh amount of charge. I don't completely understand the technology but I'd imagine they have to line up pretty darn close to each other to get a good connection. On a 30 minute drive on back roads, with either the Ampere app or the Car Home Ultra app running (plus bluetooth and GPS), I only gained 1% on the battery. I fear that with Spotify and Navigation running, it may actually lose battery %. Also, in full disclosure, I did run that app with both the Incipio case on and the phone naked on the charger, with pretty much the same results. I am going on a work trip this next week and will be in driving for about 9 hours, so I will have a little better test case for how the charging portion works. I'll update this post either during or after that trip.
As for the NFC, I tried a couple of different apps (Trigger and NFC Tools/Tasks) to try to get it to start Car Home Ultra when I set the phone on the charger. I was never able to consistently get it to recognize the NFC. I will fully admit that this is the first time I've tried to use NFC for anything consistently (I use Wallet at McD's occasionally, but that's about it). So, I may not be hitting the NFC chip in the phone and the NFC chip in the dock just right. I tried "swiping" the phone in from all directions before attaching it and also tried attaching it at different points as opposed to centering the phone and charger on each other. Nothing seemed to help, sometimes the NFC picked up, most of the time it did not.
Overall, I am not sure this charger is worth $100 (I bought it direct from the AirDock site as opposed to Indiegogo because from Indiegogo you can't return the dock if you don't like it but you can if you buy direct). As a mount, it's very easy to slap the phone on the nano foam pad and it sticks, but as a charger I am not sure it performs up to par. I understand that there is a lot of discussion about wireless charging in general and whether it has enough output to charge when there is a consistent draw from navigation and music apps so it may not be the docks fault that the technology just isn't efficient enough. They could probably sell a lot more units by offering a version without NFC and Wireless charging and sell it as just a dock with BYOC (bring your own charger) for about half of what they are charging.
Let me know if there is anything specific you want me to focus on for when I do a full review with photos.
Thanks!
I have the first gen air dock. I've stopped using it because I experienced similar experiences as you. Wireless charging is pretty slow, especially if display brightness is up and navigation is running. What's worse is that it heats the phone up. In summer months, I'll actually see thermo warnings on my Note 3.
Just like you said about "offering a version without NFC and Wireless charging", I've done precisely just that. I bought an iMagnet Mount from amazon and replaced that with the airdock. I charge it with a wired charger. The magnet is super strong, and now I can really charge the phone without overheating it. Attaching/detaching the phone is still very easy, but I actually trust the iMagnet mount more.
ihuntinde said:
I am going on a work trip this next week and will be in driving for about 9 hours, so I will have a little better test case for how the charging portion works. I'll update this post either during or after that trip.
Click to expand...
Click to collapse
Hi,
Are you able to share the results of your 9 hour trip and the phone charging during that? I'm considering getting the AirDock myself.
More results?
Yes, I am also VERY interested in seeing the results from the 9-hour drive please!
I am currently using a magnet setup + wired fast charger for my Note 5. I do love the convenience of magnet mounts, and really hoping to come up with a good solution to add Qi charging now. I have only been able to find 4 alternatives to the AirDock ($20-$50) and all of them have very mixed reviews, so I have been hesitant to try any.
The other thing I don't like about any of these is that they are all windshield mounts, and none have a dash mount. I should clarify... I need a dash mount with a surface of about 1-inch diameter that uses 3M tape. While some of these suction cups may work on a dash, they are typically 2-3 inches in diameter, and that won't fit anywhere on my dash, and I refuse to use the windshield as it would ruin my visibility/safety.
Right now I am experimenting with a DIY solution that cost me about $20 total. I can share details after I am done, and I may even make a Youtube video. Will then do some performance runs to see charge rates. It might be that I am satisfied with no gain, but no loss either. The thing I like about the DIY solution I am building is that it's modularized so I can remove the Qi charger and revert back to my current setup of magnet + wired fast charge, if and when I need that...
Finally I bought the AirDock myself. I am using it with the CD mount.
I use it with GPS nav and spotify music streamed via bluetooth to car stereo. By using the wireless charging it usually keeps the battery stable, it might move by couple percent up or down, depends on the trip length.
Great review. I was considering Air Dock for a long time
I'm not finding clear info on if the V10 is ready to go or needs something added to enable a wireless charging on a wireless charging stand.
I've seen you you can add some kind of antenna to the back cover; when I remove the back cover on mine, there is already one there; but not sure if it is for wireless charging.
Can anyone fill me in?
That's for NFC, Qi wireless charging requires an new replacement back accessory. Just google Qi Wireless, and the NFC/Qi charging requires two Pairs of PIN connectors on the LEFT and RIGHT side of the back cover. By default its only on the RIGHT hand side, which is for NFC only
I bought a wireless charging "sticker" to retrofit my v10 for wireless charging. Installation was a little finicky but totally doable. You remove the existing nfc sticker inside the back cover and replace with one that does nfc and wireless charging. Then it will change with any qi charger.
I tried using it for awhile, but I kind of hate it. You have to line it up perfectly and even then it's incredibly slow. Misalign and it gets hot but slowly discharges the battery. I never use it.
lexelby said:
I bought a wireless charging "sticker" to retrofit my v10 for wireless charging. Installation was a little finicky but totally doable. You remove the existing nfc sticker inside the back cover and replace with one that does nfc and wireless charging. Then it will change with any qi charger.
I tried using it for awhile, but I kind of hate it. You have to line it up perfectly and even then it's incredibly slow. Misalign and it gets hot but slowly discharges the battery. I never use it.
Click to expand...
Click to collapse
I had the same experience. I tried it but it is slow and the phone gets hot. I never use it anymore.
I have a Qi replacement back, and it was awesome. But after a year it keeps turning off and my Tylt charger will blink red, wake the phone up, start charging. It'll get to 100% over night, but I don't like it.
I am currently using: LG Wireless Charging Backcase CPR-120 für V10 schwarz, CPR-120.AGEUBK (from amazon.de) together with Samsung EP-PA510BWEGWW Wireless Charging Plate Mini - White and this is working fine. I did try a cheap backcase from e-bay but that one started falling apart (first some cracks and then pieces around crack fell off) so not bothered to try any others.
Something I haven't seen mentioned about the 4/4 XL is the ability to use a magnetic mounts and not break wireless charging.
On my 3 xl the plate for the magnetic mounts would interfere with the wireless coil, and I had to give up wireless charging as a result. I knew if I could position the plate high enough that it wouldn't be a problem, but on my 3 xl to do so would block the fingerprint sensor.
Positioning the mount on the 4XL, as is shown in the picture, does allow wireless charging to work flawlessly and also supports a magnetic mount for my bathtub, hot tub, pool, car, etc.
seems like that should make it into more reviews.
Is the plate getting hot? I had mine near that spot and it would get hot during wireless charging. I've since moved it close to the bottom edge and everything is fine.
airmaxx23 said:
Is the plate getting hot? I had mine near that spot and it would get hot during wireless charging. I've since moved it close to the bottom edge and everything is fine.
Click to expand...
Click to collapse
No, mine isn't getting hot. Not sure what the difference would be - perhaps my case which is kind of thick? (OtterBox?)
Instead of putting a plate in I bought a wireless charger for my car and attached it to the magnet mount that was there. It fit right in the little knob piece. Here is a couple of pics. It works perfectly. This particular one opens and closes the grips by itself.
I bought the 55W wireless charger with my phone and it works fine with the clear case that comes in the box. I also bought the official black case that has a carbon fibre effect, but with this it refuses to charge wirelessly.
Can anyone else confirm?
It wasn't the case. With the new thinner case, the phone was sitting too low on the dock for the charging coils to line up. I was scratching my head for a while until I discovered an insert inside the charger box that you stick on the charger to raise the height of the phone. All working now.
Just in case someone else comes across this.
Great, I saw your original post this morning and worried cause I want that charger myself! Glad it worked out
I've found I can charge the phone on my 20w wireless pad I got for the Mi 9. And I had to be fussy with the positioning, it was more fiddly than the mi9. Least the back's transparent