Database Info

[Q] think i bricked it good and proper

ok i need help please , i had gbread on it and installed superoneclick to get root then tried to flash cwm with vipermod. message said out of storage space or something (dont have ext mem only internal)and now phone will not turn on.
have followed this guide http://forum.xda-developers.com/showthread.php?t=1244490 and phone was recognised by omapp but couldnt change the port in device manager and couldnt find a bin to download so i tried to flash a kdz v21a
clicked start on lgflasher but nothing happened so after about 5 mins i cancelled it thinking without the port change it was a waste of time.
now i cant even get omapp to flash up when i connect phone . device manager refreshes but i cant see anything change .
hope thats enough info for some kind person to help.
many thanks in advance
marty

Try this start on step 3 its in the thrill forum but they are the same phone http://forum.xda-developers.com/showthread.php?t=1491870
sent from my acidhazard thrill

marty41 said:
...then tried to flash cwm with vipermod...
marty
Click to expand...
Click to collapse
Where did you get vipermod from? The Transformer Prime forums? That's meant for the TFP and would not have worked with the O3D since it flashes to mmcblk0p4 rather than mmcblk0p. You should have used the flasher here.
Download this, this and this. Extract smartflash.zip, install both driver packages. Then, run Windows Enabler, in the notifications bar, click it and make sure it is set to 'on'.
Now remove your phone's battery and sim card, press volume up and connect your phone to the computer. Hold volume up until it is detected by the computer. It should take no longer than 20 seconds.
Now run B_SmartFlashTool_Extern.exe, go to rom copy d/l, select LGP920_CP.fls for CP bin and LGP920_AP.bin for AP bin. Make sure under communications setup that your phone is connected (verify the com port in device manager) and then click start. If all goes well, you'll have a stock v21D phone again

Thanks for the help guys but i'm not getting a com port when i connect the phone so i don't think i can use any of those methods . or can i
i want to go back to the beginning and see if omapp will detect phone and install drivers but i can uninstall the installer but dont think that will remove the drivers , does anyone know how to do that.(cos i think i messed that bit up )
thanks again
marty
vipermod , i think i followed a link somewhere in the o3d forum where someone said u could use it to flash cwm

so , i uninstalled all lg drivers uninstalled omap installer searched registry for for any mention of omap and deleted (some wouldnt delete ) .
restarted computer (xp by the way )
then installed omap installer and lg drivers and connected phone holding vol up
and................. NOTHING whereas yesterday i had a little icon in the task bar and the opportunity to install omap drivers.
conclusion , phone is dead , i had an oppurtunity to fix it yesterday and i blew it
hope someone tells me i'm wrong but its not looking good
marty

take off battery and just put your usb cable and tell us if it shows omap in your device manager
dont press keys

if i connect phone without battery device manager just refreshes a couple of times but nothing changes with regards to ports doesn't matter if i have vol+ button in power button in or nothing
thanks anyway
marty

am i getting somewhere
update : ok so i'm on a clean install of xp and i connected the phone with vol+ and it wants to install omap4430 drivers. is that good news?
i installed omapinstaller , then the 2 lg drivers ca and ma , then reconnected the phone and went thro omap driver install but still don't have any ports in device manager
is there no way i can force it to flash without it having to think it is connected cause if its recognising it as omap4430 there must be something there
don't want to give up on it too easy , if only i put this much effort into it whilst it was working lol
marty

evening all . new update
tonight i've installed the lg support tool and drivers and found that if i leave my phone connected i occasionally get "TI sample boards" popping up in device manager for a couple of seconds without having to press buttons , unfortunately it doesn't stay on for any longer with buttons pressed.
i was wondering how to force install the "LG CDMA composite usb device " drivers cos its never asking for them as it should according to the tutorial
hope someone can help cos i've seen a few threads with same problem as me
marty

[Q] Urgent Help needed

Hi Experts,
I was successfully able to flash ICS on my LG O3D but only .bin file and after that i tried to root phone was not sucessfully all the time ,restarted later and now my phone is not switching on properly.It shows LG logo then goes blank. PLEASE HELP.
Thanks in Advance.

When connected its showing charging and in device manager-->other devices showing CDC Serial & LGE COSMO USB Device

Did you try reflash it again ???
Try flash it with "lg smartflash" it tooo easy (just select the .bin file and .fls) .
Good Luck
Sent from my LG-P920

OS_Hacking said:
Did you try reflash it again ???
Try flash it with "lg smartflash" it tooo easy (just select the .bin file and .fls) .
Good Luck
Sent from my LG-P920
Click to expand...
Click to collapse
Thanks a lot for the reply.
I tried but nothing happening..its not detecting as usb to change port to 41.
Is there any other way?? Also for flashing when i insert battery and press volume up and then connect it starts and shows LG logo and goes blank.

It is not showing in PORT in device manager when connected pressing volume + button

Does the phone go to download mode ("S/W upgrade mode ) ?? By insert the battery while you hold vol+ ??
You will see two arrows like the sync symbol in your phone screen . And then the phone will still connected with the PC .
Your problem is easy to fix . Just try to enter download mode . And every thing will be fine .
Good Luck
Sent from my LG-P920

No its not going into download mode. COM is not detecting it.

[email protected] said:
No its not going into download mode. COM is not detecting it.
Click to expand...
Click to collapse
Try hold power on and the vol+ together , then plug it with the PC . Then insert the battery .
Sent from my LG-P920

[email protected] said:
Hi Experts,
I was successfully able to flash ICS on my LG O3D but only .bin file and after that i tried to root phone was not sucessfully all the time ,restarted later and now my phone is not switching on properly.It shows LG logo then goes blank. PLEASE HELP.
Thanks in Advance.
Click to expand...
Click to collapse
You hardbricked your phone if it doesn't go into download mode.
But no panic there is always a solution;
http://forum.xda-developers.com/showthread.php?t=1942836
Follow the guide above. (and I mean every step , however small they may seem)
ICS roms are now pre-rooted so you don't have to root.
Flash Xbsall's Ported custom ics (The one in the guide.)
Then install wkpark's recovery img. (Found here ; http://forum.xda-developers.com/showthread.php?t=1978543)
Boot into recovery.
Install Darkroom ICS Int. (It's the best in my opinion) or whatever rom you wish.
They are all pre-rooted.
If you can't i'll guide you through it.
Hope i Helped.
Cheers!

boltthrower56 said:
You hardbricked your phone if it doesn't go into download mode.
But no panic there is always a solution;
http://forum.xda-developers.com/showthread.php?t=1942836
Follow the guide above. (and I mean every step , however small they may seem)
ICS roms are now pre-rooted so you don't have to root.
Flash Xbsall's Ported custom ics (The one in the guide.)
Then install wkpark's recovery img. (Found here ; http://forum.xda-developers.com/showthread.php?t=1978543)
Boot into recovery.
Install Darkroom ICS Int. (It's the best in my opinion) or whatever rom you wish.
They are all pre-rooted.
If you can't i'll guide you through it.
Hope i Helped.
Cheers!
Click to expand...
Click to collapse
Thanks a lot for the help and i really appreciate your willingness to take me out of this trouble, Thanks again

Everything worked fine till step 9..But still not showing anything in Ports

Make sure the drivers are correctly installed. Especially omap4430...
Start the script that has been referred to in the guide.
Shut down the phone , remove the battery , plug usb cable and when you see "waiting for 5 seconds" plug in the battery. That should work.
Keep me posted.
Sent from my LG-P920 using xda app-developers app

Its showing s/w update image in phone but getting message USB device not detected in PC

Thanks alot boltthrower56 .
Finally able to recover my phone and restored 3 month old backup.
By the way may i know your real name .
Can you please help me with upgrading to ICS?

[email protected] said:
Its showing s/w update image in phone but getting message USB device not detected in PC
Click to expand...
Click to collapse
That may mean you have a bad cable.
But if you restored it , it's probably sometimes bad or you changed it or you used the front panel which is a hub (divides bandwidth , slows flashing process) and it's bad for ya.
Since my real name is turkish and hard to spell i'll give one better ;
Call me John.
If you must know my real name is "Dogukan".
And yes i can help you with that although it's relatively easy now that you got a hold of it.

Thanks a lot Dogukan..
Are you into android development? Am a real noob in this and you helped me coming out of really difficult situation.
Now i want to root my phone and everytime its showing 'error no device find'

I'm not into android development... my skills lie in networking so there is not much i can do for android.
But those are common knowledge...
I bricked my phone several times to learn those.
You don't need to root. Follow wkpark's recovery installation and flash a custom rom (Darkroom int is great)
Sent from my LG-P920 using xda app-developers app

Help needed

hi have been trying to update to 4.0 via flash tool but ive tried everything and cannot get it to work......ive been trying for 3 days and ive pretty much had enough of trying on my own so i though id would ask for help.
ok firstly i am on gb 2.3 im running custom cm7 no probs but i wana take the next step 4.0 so....i have all lg flash tool etc and fast load etc all nessacary files needed but for some reason my phone wont connet and flash its doing my head in. i have it into download mode, battery out etc but after that nothing i cannot progress further its like the program wont connect/register the phone.
im running win7 i even looked into other post and thought this maybe the problem but i have already installed these when gone into download mode as said here If you plug your Phone on PC without battery, OMAP4430 device appeared for seconds and then disappeared in your Windows Device Manager
(check arsen4oo photo guide in post #3)
On windows 7 sometimes OMAP4430 flashes too fast so you cant install driver.
There is a a windows feature that will help you install the driver easier.
To view devices that were once installed but are no longer attached to the computer, open a Command Prompt window using the Run As Administrator option and enter the command:
SET DEVMGR_SHOW_NONPRESENT_DEVICES=1
Then, from the same command prompt, type devmgmt.msc to open Device Manager. Choose View, Show Hidden Devices. The new instance of Device Manager will show “ghosted” entries for devices that were once present. This technique is especially useful for fixing problems caused by leftover drivers after replacing a network card or video card—you can easily delete the ghosted device or update the OMAP4430 driver.e
i just dont know what im doing wrong
cheers in advance

HI,
Please uninstall all LG drivers, and start again. If you are using WIN7, run it with WINXP SP3 compatibility mode.
Getting the Software upgrade screen is tricky, the timing needs ti be just right for the screen to stay, else it blinks and the OMAPP difficulty starts.
You need to listed to the connect disconnect sounds carefully.
Its not difficult, just that the timing needs to be right for the battery to be inserted.
all the best
schubeir

schubeir said:
HI,
Please uninstall all LG drivers, and start again. If you are using WIN7, run it with WINXP SP3 compatibility mode.
Getting the Software upgrade screen is tricky, the timing needs ti be just right for the screen to stay, else it blinks and the OMAPP difficulty starts.
You need to listed to the connect disconnect sounds carefully.
Its not difficult, just that the timing needs to be right for the battery to be inserted.
all the best
schubeir
Click to expand...
Click to collapse
ok so i unistalled all drivers etc done as said but im still doing something wrong.....
1.i have batt out connect phone wait few seconds for it to connect hear a sound connection keep held down till also hear another connection to say all connected etc.(the drivers have installed etc)
2.the screen is blank still battery is out
3.i have installed omap flash, lg flash tool and lg smart flash tool and fastboot and i can get any to work with phone
4.now there is no software update on screen even if i put battery back in phone just stay blank
so thats were i get to so lost.....
cheers in advance

And in FLASH TOOL TUTORIAL there is illustrations of a cable broken down etc do I have to do this to get into download mode and what acctual flash tool do I need to use because there is a few out but tried most but don't work with mine is it to dowith cable? And I have brought new cables etc just in case cheers in advance

Another stupid question but it shouldn't have anything to do with my phone having being rooted and not runngin LG software......I'm so confused with it all as I have tried everything and if it don't work phone can go to someone else lol cheers again

matt2098 said:
Another stupid question but it shouldn't have anything to do with my phone having being rooted and not runngin LG software......I'm so confused with it all as I have tried everything and if it don't work phone can go to someone else lol cheers again
Click to expand...
Click to collapse
Make sure all the drivers from the guide are installed. (including omap driver)
Load the DLL and the rom to lg flashtool.
Listen to the port with LG flashtool's port settings. (One is enough , The icon with a printer cable that's the port settings)
Take the battery out but be ready to plug it back in.
connect the usb cable.
Hold volume up
You're gonna hear sounds from windows in this order ;
1.Connected
2. Disconnected
3. Connected (Again , when you hear this plug the battery back in)
If you did it right then you're now in download mode.
Go to the device manager , find the LG device (I don't remember the name , but there is only one so you'll see it.) and go to properties , advanced and port settings.
Change the port to com41.
Flashtool should take over and start.
For extra guidance , see xbsall's thread ;
http://forum.xda-developers.com/showthread.php?t=1942836

To enter download mode .
Your phone in your hands without anything :-
1- Pull out battery .
2- hold vol+ and keep holding .
3- Connect your phone and you are still holding....
4- Now the phone is connected and you are holding vol+ . Insert battery and keep holding for about 3 seconds . Now the phone in download mode (there are some korean words on the screen) .
That's all
Good Luck
Sent From My P920 (ICS ported)
Hit Thanks Button If I Helped

ok i bloody given up going to use it as a bloody paper weight doing my head in.....no matter what i do i cannot get up software screen in download mode??? i do exactly as stated and still it doesn't want to do it every time blank screen phone will not power on.
with battery in screen blank went through listerning to conect disconnect connect etc do as descriped and now phone is connectected with blank screen as stated i know its connected installed everything.
cheers for the help

http://www.youtube.com/watch?v=zrkHry0gRZw this is excatly what im doing and nothing......

When you're online pm me when you can be online tomorrow.
Sent from my LG-P920 using xda app-developers app

Read the #3 post in this thread :-
http://forum.xda-developers.com/showthread.php?t=1942836
Maybe it will help .
Sent From My P920 (ICS ported)
Hit Thanks Button If I Helped

and works it
mayby this help
http://lg-usb-modem-driver.soft32.com/free-download?rel=center
good luck

ok so further update i can get it into fastboot which has a small lg symbol and says fastboot at the top but still no Korean writing software upgrade screen and in device manager i have lg cosmo come up now. It doesn't have LGE CDMA USB SERIAL PORT this up any more, ive insalled all new driver the lot everything prgressed a little further but stuck again lol cheers for the help so far

u want to flash ported ics im right?
Sent from my LG-P920 using xda app-developers app

OIKk finnally im on software download screen YAY!!!!!!!!!!! but flash tool keeps saying fail and at the top were is says model its say su660 not p920???? which i now have managed to sort so i press start and its says ready and nothing............hasnt done much phone pwers off then back to the begin again cheers again

Because you're flashing the baseband before you flash the ROM. Change the sequence , ROM first then baseband. (Just remove the baseband you added on the flash tool ".fls file" then add it again it's gonna be flashed after the ROM )
Edit : I can help via team viewer if you want.
Sent from my LG-P920 using xda app-developers app

if u read this u should know that u neednt fastboot to flash this ported ics and have to flash bin file first then fls file
and at the thread of first ported ics from xbsa tell u everthing what u use to know to flash this rom
http://forum.xda-developers.com/showthread.php?p=17177547
2nd post is in english
Sent from my LG-P920 using xda app-developers app

its all son confusing as there is so many different guides tutorals etc the only way i can get in software mode is by fast boot i can progress further to here but now im stuck tottaly lol its gets to 27% and stops because of a omap fail???

and all the time ive only been tryig to insatll the rom bin file as of present....not the fls so im now up to here and dont have clue with team viewer lol

Look at your pm
Sent from my LG-P920 using xda app-developers app

[Q] LG Optimus 3d Not Switching On

I have tried several things mentioned on this forum but to know avail. My LG Optimus 3d P920 isnt coming up after i flashed the rom. When i connect to the system on window 7, it shows omap under unknown driver and withing 2secs disappears again. using one of the methods mentioned here, i was able to install the omap driver but each time i connect the phone, it connects and then disconnect instantly. When i tried it on window xp, i got the same error. I can boot into recovery. The phone is not switching ON atall for me to even consider goin to recovery. Sometimes when am on window xp and i press the recovery button with the battery in (vol- plus Power +3d button) it connects and then instantly disconnects again. Please help with a step by step process as am stumped. Am sure i should be able to get it up. Any help will be greatly appreciated

drwale2000 said:
I have tried several things mentioned on this forum but to know avail. My LG Optimus 3d P920 isnt coming up after i flashed the rom. When i connect to the system on window 7, it shows omap under unknown driver and withing 2secs disappears again. using one of the methods mentioned here, i was able to install the omap driver but each time i connect the phone, it connects and then disconnect instantly. When i tried it on window xp, i got the same error. I can boot into recovery. The phone is not switching ON atall for me to even consider goin to recovery. Sometimes when am on window xp and i press the recovery button with the battery in (vol- plus Power +3d button) it connects and then instantly disconnects again. Please help with a step by step process as am stumped. Am sure i should be able to get it up. Any help will be greatly appreciated
Click to expand...
Click to collapse
It's very simple,you must follow this guide if you want GB http://www.xda-developers.com/android/downgrade-the-lg-optimus-3d-to-gingerbread/ or this guide if you want ICS http://www.google.it/url?sa=t&rct=j...2ICoDA&usg=AFQjCNE1Gq5ak_HIJAFcWnsfgrxK6mf9UQ
Enjoy ^^

Still not clear
Darek96 said:
It's very simple,you must follow this guide if you want GB http://www.xda-developers.com/android/downgrade-the-lg-optimus-3d-to-gingerbread/ or this guide if you want ICS http://www.google.it/url?sa=t&rct=j...2ICoDA&usg=AFQjCNE1Gq5ak_HIJAFcWnsfgrxK6mf9UQ
Enjoy ^^
Click to expand...
Click to collapse
Thanks a bunch for your reply, the sad thing is both explanation arent clear enough. Am sorry to bother you but can i get like an idiot guide as both links especially the one with ics isnt really clear enough and the downgrade isnt helping either. downloaded their files yetdont know hw or what to do with em. Please help
Preferrably i will like a guide with downgrading. The links sent has no step by step method,it naturally assumes that one will know what to do with what file. Waiting for ur response.
Thanks again

drwale2000 said:
I have tried several things mentioned on this forum but to know avail. My LG Optimus 3d P920 isnt coming up after i flashed the rom. When i connect to the system on window 7, it shows omap under unknown driver and withing 2secs disappears again. using one of the methods mentioned here, i was able to install the omap driver but each time i connect the phone, it connects and then disconnect instantly. When i tried it on window xp, i got the same error. I can boot into recovery. The phone is not switching ON atall for me to even consider goin to recovery. Sometimes when am on window xp and i press the recovery button with the battery in (vol- plus Power +3d button) it connects and then instantly disconnects again. Please help with a step by step process as am stumped. Am sure i should be able to get it up. Any help will be greatly appreciated
Click to expand...
Click to collapse
Hi,
study carefully and follow step by step
http://forum.xda-developers.com/showthread.php?t=1942836
You will be up and running!!
please click the thanks button if you think I helped
schubeir

Still Stump
schubeir said:
Hi,
study carefully and follow step by step
http://forum.xda-developers.com/showthread.php?t=1942836
You will be up and running!!
please click the thanks button if you think I helped
schubeir
Click to expand...
Click to collapse
I have tried the method you explained step by step bt i got stuckedd on step 13
"Step 13. Run Steps 3-9 again and you will see your phone being flashed from LG FlashTool.
It will be stopped at 26-30% because phone will turn off on its own BUT the next time you try to enter NORMAL DOWNLOAD MODE it will be available again."
When i do what step 12 says, instead of my LG flash tool flashin my fone, the screeen just stay stuck on the download mode with the korean message on it. Dont know how to move ahead. Thanks for your reply, please help me move past this level. In addition, instead of LGE mobile USB serial port, what i have is LGE CDMA USB serial port.

Am still stumped
drwale2000 said:
I have tried the method you explained step by step bt i got stuckedd on step 13
"Step 13. Run Steps 3-9 again and you will see your phone being flashed from LG FlashTool.
It will be stopped at 26-30% because phone will turn off on its own BUT the next time you try to enter NORMAL DOWNLOAD MODE it will be available again."
When i do what step 12 says, instead of my LG flash tool flashin my fone, the screeen just stay stuck on the download mode with the korean message on it. Dont know how to move ahead. Thanks for your reply, please help me move past this level. In addition, instead of LGE mobile USB serial port, what i have is LGE CDMA USB serial port.
Click to expand...
Click to collapse
Somebody pls help me, i am able to get into the download mode but cant get beyond that stage. I have tried LG flashtool several time to get it fixed bt LG Flashtool is discovering my phone. Even when i click start though its suppose to start automatically, it just doesnt do anything. Or could it be because under my device manager i have LGE CDMA USB serial port instead of LGE mobile USD serial port ? because its my LGE CDMA USB serial port that i turned its port to 41
I need help please

drwale2000 said:
Somebody pls help me, i am able to get into the download mode but cant get beyond that stage. I have tried LG flashtool several time to get it fixed bt LG Flashtool is discovering my phone. Even when i click start though its suppose to start automatically, it just doesnt do anything. Or could it be because under my device manager i have LGE CDMA USB serial port instead of LGE mobile USD serial port ? because its my LGE CDMA USB serial port that i turned its port to 41
I need help please
Click to expand...
Click to collapse
you are absolutely right, that guide of how to flash ICS ported is not so clear enough for noob like us to fallow.
Fallow this guide. i hope it will help you, because it has saved my but for many times. i hope it will do the same for you.
http://www.technopat.net/forum/andr...lg-optimus-3d-ultimate-flash-guide-print.html

drwale2000 said:
Thanks a bunch for your reply, the sad thing is both explanation arent clear enough. Am sorry to bother you but can i get like an idiot guide as both links especially the one with ics isnt really clear enough and the downgrade isnt helping either. downloaded their files yetdont know hw or what to do with em. Please help
Preferrably i will like a guide with downgrading. The links sent has no step by step method,it naturally assumes that one will know what to do with what file. Waiting for ur response.
Thanks again
Click to expand...
Click to collapse
Okay,i will write a small guide
1-Download all the files in the downgrading package
2-Install LG FlashTool
3-Go on the FlashTool directory and change the standard icon with the modified one in the folder
4-Now install all the drivers in the package,if the install fail,uninstall all the lg drivers and do the procedure again
5-Now keep pressing volume UP and connect your phone to the computer
6-On the computer press start and search device manager
7-Open it and search COM Ports and change the LGE etc.. Port to COM41
8-Now you are done to do the procedure,so open LG FlashTool as administrator
9-Will appear a window with the files to put in,select BOOT21E.CP and BOOT21.AP,and select USB Mode
10-Now press ok and connect the phone to your pc pressing Volume UP
11-Go on the icon of ports(looks like a usb port) and select only port 1
12-Now press Start(the yellow arrow)
13-Now disconnect your phone and connect it,without pressing any button
14-The downgrade procedure will start automatically,so keep calm and...Enjoy!

progress but not complete
Darek96 said:
Okay,i will write a small guide
1-Download all the files in the downgrading package
2-Install LG FlashTool
3-Go on the FlashTool directory and change the standard icon with the modified one in the folder
4-Now install all the drivers in the package,if the install fail,uninstall all the lg drivers and do the procedure again
5-Now keep pressing volume UP and connect your phone to the computer
6-On the computer press start and search device manager
7-Open it and search COM Ports and change the LGE etc.. Port to COM41
8-Now you are done to do the procedure,so open LG FlashTool as administrator
9-Will appear a window with the files to put in,select BOOT21E.CP and BOOT21.AP,and select USB Mode
10-Now press ok and connect the phone to your pc pressing Volume UP
11-Go on the icon of ports(looks like a usb port) and select only port 1
12-Now press Start(the yellow arrow)
13-Now disconnect your phone and connect it,without pressing any button
14-The downgrade procedure will start automatically,so keep calm and...Enjoy!
Click to expand...
Click to collapse
Thanks a bunch, i have finally gotten a lil hang of it. The problem now is each time i flash with LG flash tool, once it gets to 82%, the part where the flashtool reads target resetting , my fone disconnects and the LG flashtool brings out this error error_wm_progress_msg and some others. I have tried this 3times now and the error remains the same. When i power the phone, it goes in to clockwod mode and when i try to mount usb, it doesnt do. Even when i try to restore the backup i have, it says md5 error. Waiting for your reply

drwale2000 said:
Thanks a bunch, i have finally gotten a lil hang of it. The problem now is each time i flash with LG flash tool, once it gets to 82%, the part where the flashtool reads target resetting , my fone disconnects and the LG flashtool brings out this error error_wm_progress_msg and some others. I have tried this 3times now and the error remains the same. When i power the phone, it goes in to clockwod mode and when i try to mount usb, it doesnt do. Even when i try to restore the backup i have, it says md5 error. Waiting for your reply
Click to expand...
Click to collapse
That s mean your phone is successfully done flashing , with me it never come to 100% it always on 82% its finish, just reboot your phone and wait for it to start on , and you are good to go, now go to recovery and format, or wipe cache and data and reboot at first time it says that you don't have enough memory left just go to privacy and reset the phone and format everything . and i think everything will be good after that. good luck.

Thanks
:good:
bensmokie said:
That s mean your phone is successfully done flashing , with me it never come to 100% it always on 82% its finish, just reboot your phone and wait for it to start on , and you are good to go, now go to recovery and format, or wipe cache and data and reboot at first time it says that you don't have enough memory left just go to privacy and reset the phone and format everything . and i think everything will be good after that. good luck.
Click to expand...
Click to collapse
Was just bout to tell u its now working. Thanks a million. U saved me buying another phone. By the way i want to flash the new jellybam on it.Any help how to go about it cus the last time i tried, the jellybam keeps hanging, or automatically shutdown. I have to remove the battery to start it again.
Thanks

drwale2000 said:
:good:
Was just bout to tell u its now working. Thanks a million. U saved me buying another phone. By the way i want to flash the new jellybam on it.Any help how to go about it cus the last time i tried, the jellybam keeps hanging, or automatically shutdown. I have to remove the battery to start it again.
Thanks
Click to expand...
Click to collapse
The truth is your phone can not be break just with flashing, it will brick though, unless your hardware is damaged, then you are think to buy new phone.
well about the JellyBam, while you are on GB now, root your phone and install Rom manager flash Bernie's file and you're out of the rebooting. the Barnie's files is the key of JellyBam or other CM10 to work. good luck.

Thanks
bensmokie said:
The truth is your phone can not be break just with flashing, it will brick though, unless your hardware is damaged, then you are think to buy new phone.
well about the JellyBam, while you are on GB now, root your phone and install Rom manager flash Bernie's file and you're out of the rebooting. the Barnie's files is the key of JellyBam or other CM10 to work. good luck.
Click to expand...
Click to collapse
Thanks for the prompt reply, i just noticed that my phone isnt detecting my sim card. Its not showing any network, i just finished installing 3d kongdom rom on it but its not showing network signal. Any help on how to fix that then can u point me to a page where i can follow the instruction of how to install the jellybam cus ijust did and its still giving the same error i mentioned earlier. I luv the interface but importantly, i will love to have network signal back on my fone

drwale2000 said:
Thanks for the prompt reply, i just noticed that my phone isnt detecting my sim card. Its not showing any network, i just finished installing 3d kongdom rom on it but its not showing network signal. Any help on how to fix that then can u point me to a page where i can follow the instruction of how to install the jellybam cus ijust did and its still giving the same error i mentioned earlier. I luv the interface but importantly, i will love to have network signal back on my fone
Click to expand...
Click to collapse
fallow this one it work for JellyBam too. http://forum.xda-developers.com/showthread.php?t=2083013
but don't forget to flash berni's files ,here : http://forum.xda-developers.com/showthread.php?p=35199371]
because if not you will not have the network signal again and it will keep rebooting.
but if i could suggest you Just suggestion . you to flash ICS first to see how is it. i love CM10 too and smoothness of it you can't resist, but it has lotta bugs for now so to avoid all that you should starting using the ICS ported by Xbsall, it work very fine.

U are a life saver
bensmokie said:
fallow this one it work for JellyBam too. http://forum.xda-developers.com/showthread.php?t=2083013
but don't forget to flash berni's files ,here : http://forum.xda-developers.com/showthread.php?p=35199371]
because if not you will not have the network signal again and it will keep rebooting.
but if i could suggest you Just suggestion . you to flash ICS first to see how is it. i love CM10 too and smoothness of it you can't resist, but it has lotta bugs for now so to avoid all that you should starting using the ICS ported by Xbsall, it work very fine.
Click to expand...
Click to collapse
Thanks again for the response. I am goin to have to go with ur advise, Please send me a link to ics rom wit a guide,if possible help me right it out step by step cus the one u did earlier was just amazing. I shall install ICs. please send me the links.
Thanks

drwale2000 said:
Thanks again for the response. I am goin to have to go with ur advise, Please send me a link to ics rom wit a guide,if possible help me right it out step by step cus the one u did earlier was just amazing. I shall install ICs. please send me the links.
Thanks
Click to expand...
Click to collapse
First of all you will need this here: http://www.technopat.net/forum/andr...lg-optimus-3d-ultimate-flash-guide-print.html
Download the ICS ported ,thank you Xbsall for this awesome job, without you, none will have ICS running to their device p920.
download only ROM file XBSA404.rar. here: http://forum.xda-developers.com/showthread.php?t=1956347
once you download it, the extract it in one new folder on ur desktop that way it will easy to find .
Well Start Lg flash tool, and flash both file as you did before , i mean in this way: http://www.technopat.net/forum/andr...lg-optimus-3d-ultimate-flash-guide-print.html
once done you are on ICS.
Root it this way: http://forum.xda-developers.com/showthread.php?t=1905116
Or this way : http://forum.xda-developers.com/showpost.php?p=31963526&postcount=532
they both work for me.
once u done that you need to flash twrp or Cwm.
you in here. http://forum.xda-developers.com/showthread.php?t=1978543
Then you can flash this if you want : http://forum.xda-developers.com/showthread.php?t=1963847
i wish you good luck!
those are the guide that i used, and they did really god job for me, hope they will do the same for you!:good:

I cant download root software
bensmokie said:
First of all you will need this here: http://www.technopat.net/forum/andr...lg-optimus-3d-ultimate-flash-guide-print.html
Download the ICS ported ,thank you Xbsall for this awesome job, without you, none will have ICS running to their device p920.
download only ROM file XBSA404.rar. here: http://forum.xda-developers.com/showthread.php?t=1956347
once you download it, the extract it in one new folder on ur desktop that way it will easy to find .
Well Start Lg flash tool, and flash both file as you did before , i mean in this way: http://www.technopat.net/forum/andr...lg-optimus-3d-ultimate-flash-guide-print.html
once done you are on ICS.
Root it this way: http://forum.xda-developers.com/showthread.php?t=1905116
Or this way : http://forum.xda-developers.com/showpost.php?p=31963526&postcount=532
they both work for me.
once u done that you need to flash twrp or Cwm.
you in here. http://forum.xda-developers.com/showthread.php?t=1978543
Then you can flash this if you want : http://forum.xda-developers.com/showthread.php?t=1963847
i wish you good luck!
those are the guide that i used, and they did really god job for me, hope they will do the same for you!:good:
Click to expand...
Click to collapse
Tanks buddy for all your help. I now have ICS on my phone but its not rooted yet. I tried downloading from one of the links you sent me but the file wasnt there anymore.After reading all comment, i found a page but the problem is my system has been having difficulties downloading from upload.com Its been an issue a very long time ago.Both my systems. Could you help me with a different link pls so i can root it. In additon, my back button is acting like cancel button,instead of taking me back, it takes me home, howcan i fix that

drwale2000 said:
Tanks buddy for all your help. I now have ICS on my phone but its not rooted yet. I tried downloading from one of the links you sent me but the file wasnt there anymore.After reading all comment, i found a page but the problem is my system has been having difficulties downloading from upload.com Its been an issue a very long time ago.Both my systems. Could you help me with a different link pls so i can root it. In additon, my back button is acting like cancel button,instead of taking me back, it takes me home, howcan i fix that
Click to expand...
Click to collapse
Guy,in the ICS OS of LG Optimus 3D,the search button acts as back button and the back button acts as home button,and the camera is upside-down..you can fix only the camera,search on forum,there are many guides

Thanks darek
Darek96 said:
Guy,in the ICS OS of LG Optimus 3D,the search button acts as back button and the back button acts as home button,and the camera is upside-down..you can fix only the camera,search on forum,there are many guides
Click to expand...
Click to collapse
Thanks darek for the info, i found out some hours ago too. Its a pain in the bud. I dont mind the camera bt the search and back button i do mind. Is there a way to go bout that, if not is there any other ics rom that i can try because i doubt i can use this. Pls reply asap

drwale2000 said:
Thanks darek for the info, i found out some hours ago too. Its a pain in the bud. I dont mind the camera bt the search and back button i do mind. Is there a way to go bout that, if not is there any other ics rom that i can try because i doubt i can use this. Pls reply asap
Click to expand...
Click to collapse
For the question of buttons,is only a habit question
No one rom with ICS can solve this problem,so accept it xD

Fastboot: Stuck at "waiting for device"

Hi all,
today I wanted to install Andromadus in my Desire S. I have to do the whole thing and was looking forward to use http://forum.xda-developers.com/showthread.php?t=2088385 for it. Sadly I am stuck at "waiting for device" when I am trying to get the TokenID via this tool.
So instead, I did the whole run as described on HTCdev. The following was done:
1. Installed Android SDK
2. Installed Google USB Driver
3. Installed HTCSync including HTC BMP USB Driver and HTC Driver Installer
4. Deinstalled (only!) HTC Sync
5. Activate USB Debugging (as suggested in some threads I have found)
6. Remove battery
7. Boot into Hboot
8. Select Fastboot
9. Connected Desire S via USB cabel (Fastboot USB in red visible)
10. Started cmd with adminstrator privileges
11. Executed "fastboot oem get_identifier_token"
12: *see Screenshot below*
I figure, that in the end I did exactly the same as hasoon2000's tool was and was stopped at the same point. I just wanted to make sure that it was not the tool that caused the troubles... I also tried different versions of fastboot.exe. The one provided by hasoon2000 and the one suggested on htcdev from the android-sdk_r13-windows.zip.
I do not have an idea how to go on. Does anyone know?
Just to add some specs:
- Desire S
- Android 4 RUU by HTC
- HBOOT 2.02.0002
- Windows 7 64Bit
Help anyone?
Cheers!

Today, I had some more time to play around with my problem... and was able to get the TokenID.
Solution: Tried different USB ports. This works at my USB 2.0 port, the other was a 3.0.
I will go on now, hopefully, everything will work out fine.

Everything worked out fine.
Thanks much for all the efforts people are doing to run such an awesome community!

I didn't see this post when it first went up, but problems using USB v3 ports are fairly common and fairly well-known.

Well, since I started with all the CustomROM stuff three day ago, I did not know. And even after 80 views of this thread nobody told me.
But now I know.
Another good thing about this: I pushed myself and tried everything by hand instead of using hasoon2000's tool. Thats great actually. Better than pressing some buttons.
No offence to hasoon2000's tool, that great, but sometimes duing such stuff on your own is more fun. Just like setting and building a Desktop PC on your own, istead of buying on in a store.

install PDAnet on your device .. follow procedure of installation carefully ( should be installed on both pc and phone ) and when it was installed .when u enter your bootloader your phone will be recognize by your pc and wait for device will gone .
the method tested by me and took me one month two years ago to find .. on my g nexus first try to unlock .
PDAnet isntall drivers and everything you need to use adB commands ... if it helped give me thanks and let me know by pm .
PDA links
http://junefabrics.com/android/downloadold.php

afraaa said:
install PDAnet on your device ..
Click to expand...
Click to collapse
See above, that would not help.
But thanks for replying after almost a year...
eschtak said:
Solution: Tried different USB ports. This works at my USB 2.0 port, the other was a 3.0.
I will go on now, hopefully, everything will work out fine.
Click to expand...
Click to collapse

i replied becuase sure there will be ppl visiting this QA thread . man this works for me every time . and specially wit windows 8 .
pay attention that u should boot phone to android and then install PDA last version and turn the debugging mode . and then it will ask on your phone that always alow this computer use pda on phone and u says yes . in nexus when u open bootloader on phone , phone will be recognize by windows ( green check icon in system try appear ) showing windows know your device in boot loader screen . then u can proceed with ADB command . maybe bootloader of htc is a hard ass one like LG phone that is pain in ass to unlock .
then when i finished . u should boot in bootloader . maybe its not working with HTC but sure works with nexus devices . it pity didnt worked for u . hope it help ppl who read this later . u should get a nexus 5 man . its cheap and amazing

afraaa said:
i replied becuase sure there will be ppl visiting this QA thread . man this works for me every time . and specially wit windows 8 .
pay attention that u should boot phone to android and then install PDA last version and turn the debugging mode . and then it will ask on your phone that always alow this computer use pda on phone and u says yes . in nexus when u open bootloader on phone , phone will be recognize by windows ( green check icon in system try appear ) showing windows know your device in boot loader screen . then u can proceed with ADB command . maybe bootloader of htc is a hard ass one like LG phone that is pain in ass to unlock .
then when i finished . u should boot in bootloader . maybe its not working with HTC but sure works with nexus devices . it pity didnt worked for u . hope it help ppl who read this later . u should get a nexus 5 man . its cheap and amazing
Click to expand...
Click to collapse
WOW I cannot believe that this worked. I was seriously losing up, I tried thousands of ways posted on XDA and many other websites, none worked but the one that you posted here worked perfectly on my Xperia Mini. THANKS A LOT! You saved me a from a severe headache. Cheers

XPMSU said:
WOW I cannot believe that this worked. I was seriously losing up, I tried thousands of ways posted on XDA and many other websites, none worked but the one that you posted here worked perfectly on my Xperia Mini. THANKS A LOT! You saved me a from a severe headache. Cheers
Click to expand...
Click to collapse
im glad it helped man i found this trick among 1000 comment on one of solution post ) . i was searching for months to find it . glad u are happy . even on xda back the time couldn't help me . still doing this trick ,

afraaa said:
i replied becuase sure there will be ppl visiting this QA thread . man this works for me every time . and specially wit windows 8 .
pay attention that u should boot phone to android and then install PDA last version and turn the debugging mode . and then it will ask on your phone that always alow this computer use pda on phone and u says yes . in nexus when u open bootloader on phone , phone will be recognize by windows ( green check icon in system try appear ) showing windows know your device in boot loader screen . then u can proceed with ADB command . maybe bootloader of htc is a hard ass one like LG phone that is pain in ass to unlock .
then when i finished . u should boot in bootloader . maybe its not working with HTC but sure works with nexus devices . it pity didnt worked for u . hope it help ppl who read this later . u should get a nexus 5 man . its cheap and amazing
Click to expand...
Click to collapse
YOU SIR ARE A LEGEND!
I was going crazy as nothing worked when rooting my tablet. Spent 2 days trying to figure it out. I'm so glad you posted this even when the user above solved his own issue.
Thankssss

dreamville said:
YOU SIR ARE A LEGEND!
I was going crazy as nothing worked when rooting my tablet. Spent 2 days trying to figure it out. I'm so glad you posted this even when the user above solved his own issue.
Thankssss
Click to expand...
Click to collapse
OH i'm happy it was helpful , cheers

HTC Sync error = -1 ;(
afraaa said:
install PDAnet on your device .. follow procedure of installation carefully ( should be installed on both pc and phone ) and when it was installed .when u enter your bootloader your phone will be recognize by your pc and wait for device will gone . ...the method tested by me and took me one month two years ago to find .. on my g nexus first try to unlock .
PDAnet isntall drivers and everything you need to use adB commands ... if it helped give me thanks and let me know by pm .
PDA links ...... snip
Click to expand...
Click to collapse
.....
I was forced to try your solution proposal, but I could not get PdaNet to connect to via WiFi hotspot, USB or Bluetooth even though it recognised my xperia but failed to pair with it. ;(
Still no root for my xperia ;(

Any fix if only USB 3.0. Ports available? Have no other USB Port to change.

4r44444 said:
Any fix if only USB 3.0. Ports available? Have no other USB Port to change.
Click to expand...
Click to collapse
If you have a USB 3.0 only, also you have the ability to run Linux from a USB stick.
http://www.pendrivelinux.com/

In case this is helpfull: I got the same issue on Windows 10 :
Desire S, HTC Sync Manage installed ("adb devices" is working), but not way to make work the "fastboot devices".
And I have only USB3.
And finaly I found one topic providing the solution for me: set a registry key...
Write the following in a .reg file:
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\0BB40FF00100]
"SkipBOSDescriptorQuery"=hex:01,00,00,00
Launch regedit in administrator mode, import the reg file. Reboot, and that's all !!

afraaa said:
im glad it helped man i found this trick among 1000 comment on one of solution post ) . i was searching for months to find it . glad u are happy . even on xda back the time couldn't help me . still doing this trick ,
Click to expand...
Click to collapse
So I installed PDA on windows 10 and on Phone apk.
No what ?
It makes connection between phone and computer. I already have this. If i type in ".\adb reboot bootloader" it will load bootloader. from there .\fastboot flash recovery recovery.img , it wont do anything Waiting for device.
PDa only works when you are in the Android OS,not Bootloader. It makes connection between the os's windows + Android.
WHat I am trying to do is install an update to my Asus Zenfone 3. I have TWRP it wont work with hat.I need stock rom. I have it. I cant install it,reason: waiting for device.
I did this many times, but its never easy,its always luck or God knows what.
What I do is, install stock recovery (not twrp). With stock recovery I install official updated ROM 8.01. and then get back TWRP. You need TWRP to flash SuperSu so you can have root.
I did this before with 7.0.1 .....now I cant get this stock recovery...waiting for device. It only listens to the first command,after it goes int Fastreovery or whatever it is...it wont go to the next command.