Related
Ok, i've had a problem with it, first i removed the protector that was as large as the device and made the screen very ugly, then i got the one from the box and putted it on, every air-bulb was gone when i kept rubbing etc.
1 stayed, under that bulb there was something white, i found out it was a 'piece' of dust.
It was kind of annoying so i removed the screen-protector, now when im trying to put it on i get lots of 'dust-bubbles',
Anyone has an idea of how to do it or should i just leave my diamond without the screen protector?
Protection
Personally i prefer to have a screenprotecter on my device. I can recommend invisible shield. its very durable and will not be scratched. check it out on www.zagg.com
If you remove the protector, then there will alway be dust next time, because the dust get stuck to the protector glue. (I have also remove mine several times)
I have tried zagg, but I can't recommend it. It is a little sticky (which they also says on their homepage) and I don't like that. The floating feeling is gone. It is also not that invisible.
I have selected to buy a new original protector, and will use that.
The trick to get it on without bobbles is to start on the long edge and then slowly add it. (Keep the 'paper' on as long a possible).
(Michael
willyy1991 said:
Ok, i've had a problem with it, first i removed the protector that was as large as the device and made the screen very ugly, then i got the one from the box and putted it on, every air-bulb was gone when i kept rubbing etc.
1 stayed, under that bulb there was something white, i found out it was a 'piece' of dust.
It was kind of annoying so i removed the screen-protector, now when im trying to put it on i get lots of 'dust-bubbles',
Anyone has an idea of how to do it or should i just leave my diamond without the screen protector?
Click to expand...
Click to collapse
The original is washable. Wash it and dry it with a paper towel that sucks in the water bubbles, wipe dry and clean your screen and reapply it.
By the way, this goes to Accessories forum.
mhfalken said:
If you remove the protector, then there will alway be dust next time, because the dust get stuck to the protector glue. (I have also remove mine several times)
I have tried zagg, but I can't recommend it. It is a little sticky (which they also says on their homepage) and I don't like that. The floating feeling is gone. It is also not that invisible.
I have selected to buy a new original protector, and will use that.
The trick to get it on without bobbles is to start on the long edge and then slowly add it. (Keep the 'paper' on as long a possible).
(Michael
Click to expand...
Click to collapse
Where can you buy a new one, i need it really fast because my phone is without protection right now and no i am affraid of pressing it to hard to leave a permanent mark..
tnyynt said:
The original is washable. Wash it and dry it with a paper towel that sucks in the water bubbles, wipe dry and clean your screen and reapply it.
By the way, this goes to Accessories forum.
Click to expand...
Click to collapse
I did this and the dust keeps coming at the protector and my phone and there will be bubles because the dust gives it a 'height-problem'..
I bought invisible shield for mine, its pretty nice after say 4 days from install.
For first 2 days it might seem really bad but it gets much better.
I somehow scratched it without even noticing it, so I sent picture to zagg and they sent me new one. Even though scratch was very minor.
mhf
hi. this my first post on this web site
excuse me for my bad english
i have a diamond and i remove orginal screen protecter because i write sms with letter recorgnizer and the area that i write words on the screen become white and scratch. i remove orginal and buy a new one that for iphone. i cut it for my phone size and apply it. its sooo much stiky and i have a problem like orginal one.i wnat to remove it and when i do it a tiny layer of glue stand on my diamond screen. i can't clean it. and it give a bad scene to my diamond.
what's your idea. i give u a pichture from my diamond screen.
Perhaps you could use isopropyl alcohol, usually it will remove glue without damaging the plastics surface (in that case: your display). DON'T USE nail polish remover, acetone or even benzine, it will remove the glue too - but your display would look "milky". You can get isopropyl alcohol at the pharmacy.
Tell us if that helped you
mhf said:
hi. this my first post on this web site
excuse me for my bad english
i have a diamond and i remove orginal screen protecter because i write sms with letter recorgnizer and the area that i write words on the screen become white and scratch. i remove orginal and buy a new one that for iphone. i cut it for my phone size and apply it. its sooo much stiky and i have a problem like orginal one.i wnat to remove it and when i do it a tiny layer of glue stand on my diamond screen. i can't clean it. and it give a bad scene to my diamond.
what's your idea. i give u a pichture from my diamond screen.
Click to expand...
Click to collapse
You might be interested in this thread: http://forum.xda-developers.com/showthread.php?t=421229
I didn't get a screen protector with mine... I mean, I had a shipment protector with a little tab for peeling off, but nothing came with it for long term use. It's a Sprint, did they just not include one?
the exim screen protector is very good and smooth
I always use the Brando screenprotectors. See their online shop. They ship worldwide for only $ 3,00 shippingcosts.
It is very easy to install, easy to clean, 100% garanteed scratch free and very durable.
iixnullxii said:
I didn't get a screen protector with mine... I mean, I had a shipment protector with a little tab for peeling off, but nothing came with it for long term use. It's a Sprint, did they just not include one?
Click to expand...
Click to collapse
I've got a Sprint Diamond too, and didn't think I got a protector either, but it was in the separate bag that has the manuals. It should have come with one...Wish it woulda come with an extra one too, oh well.
I had the same problem with misalignment and dust bubbles with the HTC protector on my first few tries...i did however fix the problem...
Take the protector off and clean off the phone...use a microfiber cloth to get all the dust and oil off...after its super clean...take the protector and wash it off with some mild soap...rub the soap in with your fingers and get it clean. Be sure to note which side is down. After its clean, hold it around the edges and let the water bead off...i blew on the protector to get residual water off...some water is ok...actually helps with the install...the basically carefully apply it still holding the sides making sure not to leave finger prints. Start from the top and work your way down... i used a credit card pushed against the microfiber cloth to squeegie the protector down...be carefull with the few drops of water. After you have it down...there might be little bubbles or what looks like water spots where water is trapped under the screen...dont worry...just use your phone and leave it alone. Once it heats up from the excessive phone use it will start to dry up and the protector will come out very nice and smooth. Mine is flawless and i did the wash with soap apply and remove at least 3 or 4 times to get it right...Just be patient
I use screen protector from martinfields, what do you say about, anyone have one??
I think the best in market
My HTC one got a nasty scratch in it last week, so I ordered a Martin Fields.
It arrived this morning and I've got it on without any problems. So far I've noticed:
- It's not a perfect fit like the HTC one was. The hole for the speaker at the top is larger than the hole in the phone. It's not bad though.
- The visibility of the screen does seem better than the HTC protector, but I don't know if it's just the placebo effect of having a more expensive protector.
- It was _easy_ to put on, no bubbles at all
- The protector for the bottom buttons is awful. The circle is just the right size to completely hinder using the touch wheel and it's obvious that you've got a piece of plastic on there.
- It seems smoother than the original HTC one when using the stylus.
So far I'm impressed with it. I didn't bother with the camera hole or bottom hard buttons. The in box HTC one was fine for me, but when I got a scratch on it (my stylus somehow developed a sharp edge), it annoyed me.
I'm using the one supplied as standard with a uk CompactIV and it's great- you can hardly tell it's thereand the sensitivity seems fine.
I have 24 diamond screen protectors. Because i bought 24 diamonds and sold them all without screen protectors so i am sorted untill i buy another phone.
After using the martin fields one for a couple of days, I think it's great.
The screen looks much brighter and clearer through it (I thought the HTC one was great, but I do notice the difference). Plus the smoothness is brilliant, theres pretty much no friction for the stylus or fingers
where can i purchase the htc screen protector? the original that comes in the box...
I had dust under my screen. Here's a easy solution.
Items needed: heat gun
razor blade
guitar pick/credit card
silicone/ or any other rubbery glue
3m tape
1. Heat outer edges of screen with heat gun, for about a minute.
2. Use razor blade, or something very thin to fit between digitizer and plastic frame of the phone. ( I suggest starting on the right hand side of the screen towards the top, as the connector is on the top left side for the digitizer, and there's a strip at the bottom for the buttons)
3. Once it has started separating, use the guitar pick, or credit card and work your way around the screen, going down the right hand side, bottom( careful of the little white strip for the buttons) and back up the left hand side.
4. When you've done that, you will be able to flip back the digitizer, DON'T TRY TO YANK IT OFF THE PHONE, it's still connected inside, JUST FLIP IT BACKWARDS.
5. Clean off all the crappy double sided tape from the factory.
6. Apply 4 SMALL squares of 3M double tape to the corners, cut them small enough, and place them on the corners, so they don't show up when you put the digitizer back on. You'll see how there's a certain amount of room to work with.
7. Apply with a toothpick, or something similiar, silicone, or your rubbery glue, to the raised edge of the frame, you know the one you just cleaned the factory tape from. ( LESS IS BETTER, if you use too much, when you press the digitizer back on, it will spread between the screen and digitizer, so you will have to remove it again, clean and start over.)
8.Then once you applied your glue, apply your digitizer back on, carefully pushing around the edges, not extra hard, just so it sits nice and flush like it did from the factory.
9. Wipe any excess glue that comes out around the edges.
Enjoy your dust free Sensation.
PS you can search youtube for sensation digitizer replacement, and use the part towards the end, for picture/video reference. YOU DON'T NEED TO TAKE YOUR PHONE APART for this because you don't need to disconnect the digitizer, like I said just flip it back.
ALMOST FORGOT, GET THE THINNEST POSSIBLE 3M TAPE, OR DOUBLE SIDED TAPE, SO THE SCREEN WILL SIT FLUSH WITH THE FRAME AFTER INSTALLING.
http://www.youtube.com/watch?v=1Q_KihDB4Og&feature=related - SKIP TO 4:30 for digitizer removal. IF NOT I'M ALLOWED TO POST LINKS TO YOUTUBE, PLEASE LET ME KNOW, I WILL REMOVE IT.
I wouldn't even consider this if your phone is still under warranty. This is a known problem and HTC readily admitted it for me. I got a new phone for free and it IS dust free for months now.
Matt
True, if I was under warranty I probably would've sent it in too but I got my phone from the US so I probably would've had to send it back there for replacement...but for those of us that don't have warranty and are rooted, flashed, and supercid, and don't want lose all that its a decent alternative in my opinion.
Sent from my HTC Sensation 4G with Beats Audio using XDA App
That sounds a bit scary heat gun on my screen? No no no...
Sent from my HTC Sensation XE with Beats Audio using XDA App
just wanted to ask because i may end up doing this, what specific glue did you use and how were your results?
cyanogendroid said:
just wanted to ask because i may end up doing this, what specific glue did you use and how were your results?
Click to expand...
Click to collapse
I'm in Romania at the moment, and they don't have stuff here that they have in the US. So I just used the thinnest double sided tape I could find here, generic brand, and universal black silicone.
Being in the US, I can tell you that the best tape would be 3M double sided FILM tape( it's very thin, business card like and will allow your digitizer to sit flush with the frame like stock) since you can get it there. And for the sealing part of it, either silicone(black) or a glue that will NOT harden completely when dry, that way if you need to ever remove the digitizer again you are able to do so.
As for my results, you can't tell anything was ever done to the phone!
Technical otaku. My G3 hero has this problem too.
Sent from my HTC Sensation XE with Beats Audio Z715e using XDA App
Lol what? If you just got it then just get it replaced.
Sent from my HTC Sensation XE with Beats Audio using XDA App
I bought mine used, so I'm not even sure if it was still under warranty. And I'm in Romania right now and I got it from the US, so I don't know how that would've worked. I'm rooted, flashed, supercid, and all that good stuff, and the back cover is polished. I'm sure HTC would've had something to say about that. And then to sit without a phone for who knows how many weeks and the replacement to get dust too.. at least now I know it'll never have dust again.
lol, extreme to the limits !!!. i'll pass on the op "advice" and just call HTC if dust gets under my screen.......
well, too extreme for me...heat gun? Since my Sensation has 2-year warranty and HTC admits there is a problem, i will not take the risk (and void warranty)...but i guess somenone could use this fix...i guess...
Like I said, it's mostly for the few that are out of warranty, out of country, etc..
i advise no 1 to do this, seek a pro to do it, even if not under warranty
Yeah that sounds freaky and I'm used to reppairing small electronics and doing stupid things, but I wouldn't try this
Well, my Sensation isn't under warranty (I believe; was purchased via ebay), so I might have to perform this in the future when the dust build up becomes unbearable. Thanks for the tutorial OP.
ungraph said:
Well, my Sensation isn't under warranty (I believe; was purchased via ebay), so I might have to perform this in the future when the dust build up becomes unbearable. Thanks for the tutorial OP.
Click to expand...
Click to collapse
No problem... if you do it, you'll see it's not a big deal, and an easy process.
it worth the risk
guys there is no need to be scared, i've done it by myself and it works.
Thank you so much for this tutorial! I did it and I've never done something like this before, it's not that difficult. I just had some problems with cleaning the tape that was on the screen before, but I managed somehow... Thanks again, OP, you save my senny and you saved me a lot of money by not having to take it to a pro to do it
Hi xda, so I got tired of having dust under my screen and decided to try to fix this myself, I used many disassembly videos and this http://forum.xda-developers.com/showthread.php?t=1479734&highlight=dust as guides, initially I didnt open my phone completely, and used a hair dryer to heat and loose the glue, I guess that wasnt enough, then I finally separated the glass from the screen and procedeed the cleaning, everything good.
Then when I pushed the glass and realized there was a little space between the glass/lcd and the plastic frame (look at pic), tried to put the back cover in again and noticed the right side of the phone, the plastic one was kinda lifted and barely fitted my back cover again, reopened and realized this (look at pic) it seems that the main frame and plastic frame (pic again) got a bit separated, when I was trying to lift the glass i heard some cracks there, I tried pushing it gently but I dont want to damage the lcd, next thing im gonna do is disassemble it completely and hit gently the lifted side of the frame with a hammer so it fits flush again, before doing this, Do you have any sugestion or advice? Has this happened to you?
Also since I dont have a proper heat gun and I'll be using a hair dryer I would thank you if you know and can tell me what areas of the lcd are glued to the main frame, pic attached, if you know you could use paint to point them.
Im a bit worried about the tension the phone is getting with the cover on, I hope only the main frame is getting it... as the phone is pushed to its side (0.5-1mm maybe) I cant plug my headphones and i get slightly worse overall signal. Thank you in advance for any help.
Dom42 said:
Hi xda, so I got tired of having dust under my screen and decided to try to fix this myself, I used many disassembly videos and this http://forum.xda-developers.com/showthread.php?t=1479734&highlight=dust as guides, initially I didnt open my phone completely, and used a hair dryer to heat and loose the glue, I guess that wasnt enough, then I finally separated the glass from the screen and procedeed the cleaning, everything good.
Then when I pushed the glass and realized there was a little space between the glass/lcd and the plastic frame (look at pic), tried to put the back cover in again and noticed the right side of the phone, the plastic one was kinda lifted and barely fitted my back cover again, reopened and realized this (look at pic) it seems that the main frame and plastic frame (pic again) got a bit separated, when I was trying to lift the glass i heard some cracks there, I tried pushing it gently but I dont want to damage the lcd, next thing im gonna do is disassemble it completely and hit gently the lifted side of the frame with a hammer so it fits flush again, before doing this, Do you have any sugestion or advice? Has this happened to you?
Also since I dont have a proper heat gun and I'll be using a hair dryer I would thank you if you know and can tell me what areas of the lcd are glued to the main frame, pic attached, if you know you could use paint to point them.
Im a bit worried about the tension the phone is getting with the cover on, I hope only the main frame is getting it... as the phone is pushed to its side (0.5-1mm maybe) I cant plug my headphones and i get slightly worse overall signal. Thank you in advance for any help.
Click to expand...
Click to collapse
I wanted to try it myself, but didn't have the guts. Sorry to hear your problem.
The guide said "5. Clean off all the crappy double sided tape from the factory."
It seems to me that you have put the same double tape. I suggest you remove the LCD again, clean the old tape and apply a new one.
Good Luck!
Edit: Does your touchscreen work well?
elvisypi said:
I wanted to try it myself, but didn't have the guts. Sorry to hear your problem.
The guide said "5. Clean off all the crappy double sided tape from the factory."
It seems to me that you have put the same double tape. I suggest you remove the LCD again, clean the old tape and apply a new one.
Good Luck!
Edit: Does your touchscreen work well?
Click to expand...
Click to collapse
Dont be afraid of trying, i was also scared at first but bah, 1. There's no official htc support in my country 2. I dont trust repair houses. 3 I wont wait 2-4 weeks for something relatively easy. So why dont try by yourself?
"Clean off all the crappy double sided tape from the factory" I dont have double sided tape at hand right now, getting it in 2 days, however thats not the problem, the glass sits flush and tight even with the old tape, the problem is that as i said my phone somehow got wider and the back cover is hard to put. Thanks, im gonna need good luck.
Oh and yes my touchscreen works perfectly.
Dom42 said:
Dont be afraid of trying, i was also scared at first but bah, 1. There's no official htc support in my country 2. I dont trust repair houses. 3 I wont wait 2-4 weeks for something relatively easy. So why dont try by yourself?
"Clean off all the crappy double sided tape from the factory" I dont have double sided tape at hand right now, getting it in 2 days, however thats not the problem, the glass sits flush and tight even with the old tape, the problem is that as i said my phone somehow got wider and the back cover is hard to put. Thanks, im gonna need good luck.
Oh and yes my touchscreen works perfectly.
Click to expand...
Click to collapse
There's no HTC support in my county either. Maybe it got wider because of the heat. Even though the glass sits tight I suggest you change the old tape, cause that's what let dust in the first place. The guide said also smth about silicon, did you apply it?
Was it difficult to remove the LCD with the hairdryer? I don't have a heatgun.
LOL, seems I'm the one doing the questions now.
elvisypi said:
There's no HTC support in my county either. Maybe it got wider because of the heat. Even though the glass sits tight I suggest you change the old tape, cause that's what let dust in the first place. The guide said also smth about silicon, did you apply it?
Was it difficult to remove the LCD with the hairdryer? I don't have a heatgun.
LOL, seems I'm the one doing the questions now.
Click to expand...
Click to collapse
No it didnt got wider because of the heat, when i was trying to open it i forced the bezel/metal main frame (4th pic) so it unclipped. Getting the double tape tomorrow. No way im gonna put silicon, ill put just 4 tiny squares of doublesided tape, i would rather clean it monthly than that, also i keep it always clean, it just had the dust before (second hand).
Yes, it was very difficult to remove the LCD, dont even try this without a heatgun, i was lucky to not mess something else duh i even crushed the LCD cable a bit, but it works normally. Only solution now is to get a new main frame.
Dom42 said:
No it didnt got wider because of the heat, when i was trying to open it i forced the bezel/metal main frame (4th pic) so it unclipped. Getting the double tape tomorrow. No way im gonna put silicon, ill put just 4 tiny squares of doublesided tape, i would rather clean it monthly than that, also i keep it always clean, it just had the dust before (second hand).
Yes, it was very difficult to remove the LCD, dont even try this without a heatgun, i was lucky to not mess something else duh i even crushed the LCD cable a bit, but it works normally. Only solution now is to get a new main frame.
Click to expand...
Click to collapse
Thanks for the advice. I hope you manage to fix your phone
The screen on my Skyrocket became recently cracked. The cracks begin at the very top and make really small, tight cracks, then it spiderwebs down the front of the phone into bigger pieces of glass. Towards the top, the smaller pieces of glass have begun to fall out. It's not really dangerous, but I am kinda nervous of cutting my finger one of these times.
I've been searching on Google and Youtube to find an answer to my question, but I can't seem to find a real, definitive answer. I want to know if the glass/lens of the digitizer can be safely removed from the rest of the digitizer?
I know all the tricks of using a heat gun, and a little scraper, but I also heard that the digitizer itself is like 1mm thick and VERY delicate?
So I went ahead and bought the glass off of Ebay for like $7. Then I received the glass in the mail, and got kinda apprehensive of doing it.
Another question: If I successfully remove all the old glass, how do I secure the new lens to the digitizer? Is there some sort of glue I need, or is it friction from the chrome trim ring?
Yupp i think it can be done
Sent from my Renovate HTC
Afrojoe said:
Yupp i think it can be done
Sent from my Renovate HTC
Click to expand...
Click to collapse
Damn. You got that research and stuff?
demonblod said:
The screen on my Skyrocket became recently cracked. The cracks begin at the very top and make really small, tight cracks, then it spiderwebs down the front of the phone into bigger pieces of glass. Towards the top, the smaller pieces of glass have begun to fall out. It's not really dangerous, but I am kinda nervous of cutting my finger one of these times.
I've been searching on Google and Youtube to find an answer to my question, but I can't seem to find a real, definitive answer. I want to know if the glass/lens of the digitizer can be safely removed from the rest of the digitizer?
I know all the tricks of using a heat gun, and a little scraper, but I also heard that the digitizer itself is like 1mm thick and VERY delicate?
So I went ahead and bought the glass off of Ebay for like $7. Then I received the glass in the mail, and got kinda apprehensive of doing it.
Another question: If I successfully remove all the old glass, how do I secure the new lens to the digitizer? Is there some sort of glue I need, or is it friction from the chrome trim ring?
Click to expand...
Click to collapse
Good luck man.....i tried and its a PITA!!!! Haha my dumbass ended up cracking my digitizer/LCD so i had to shell out another $130 for a new one......i hope u have better luck than me tho.....
Sent from my SGH-I727 using xda app-developers app
jyazzie110 said:
Good luck man.....i tried and its a PITA!!!! Haha my dumbass ended up cracking my digitizer/LCD so i had to shell out another $130 for a new one......i hope u have better luck than me tho.....
Sent from my SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
That's EXACTLY what I'm worried about. But I guess my screen is done for either way. It's terribly cracked and falling apart now, so it can't get much worse.
demonblod said:
That's EXACTLY what I'm worried about. But I guess my screen is done for either way. It's terribly cracked and falling apart now, so it can't get much worse.
Click to expand...
Click to collapse
In the accessories section a guy claims to have done it and used double sided tape to put the glass back on......idk tho i heated it up so much i burned my finger wen i touched the glass and i still couldn't separate it from the digitizer.....id say just buy a new digitizer......it isnt hard to replace.....i bought the digitizer alone without the housing around it and saved about $25.....
Sent from my SGH-I727 using xda app-developers app
Nope. It didn't work. I broke it. I kept using my heatgun, but the stupid adhesive just wouldn't give up. I turned up the heat a little bit, and suddenly a section of the digitizer just blew up into a dull green color. I guess that means I fried the pixels. Even after I burned the digitizer, the adhesive was still very strong. I think this is actually impossible. In order to loosen the adhesive, you would have to achieve a temperature far past the point of damaging the digitizer.
Another concept:
I had MANY small pieces of glass. I kept thinking "I wish I had nice, big pieces of glass. Then this would go so much faster". When I did try to lift a larger chunk of glass, the combined tension of the adhesive over the whole surface area caused the piece of glass to flex and crack.
So when you try to remove a large piece of glass, it then breaks into a hundred tiny pieces of glass and you're screwed even more.
demonblod said:
Nope. It didn't work. I broke it. I kept using my heatgun, but the stupid adhesive just wouldn't give up. I turned up the heat a little bit, and suddenly a section of the digitizer just blew up into a dull green color. I guess that means I fried the pixels. Even after I burned the digitizer, the adhesive was still very strong. I think this is actually impossible. In order to loosen the adhesive, you would have to achieve a temperature far past the point of damaging the digitizer.
Another concept:
I had MANY small pieces of glass. I kept thinking "I wish I had nice, big pieces of glass. Then this would go so much faster". When I did try to lift a larger chunk of glass, the combined tension of the adhesive over the whole surface area caused the piece of glass to flex and crack.
So when you try to remove a large piece of glass, it then breaks into a hundred tiny pieces of glass and you're screwed even more.
Click to expand...
Click to collapse
Exactly wat happened to me.....so u gettn a new digitizer or just a whole new phone?
Sent from my SGH-I727 using xda app-developers app
So I just got this screen protector today and it does look amazing ill admit. The problem is it does not seem like the top part of the protector wants to attach to the phone as if there is no adhesive. This is mostly my fault ill admit. I put it on wrong and what i did was take the bottom of nail and peeled it up and tried to re apply to adjust it. Is there any way I can maybe re ad the adhesive and how can I safely get off any lint or w/e that may have gotten onto the bottom of the screen protector? I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.
blackguy101 said:
So I just got this screen protector today and it does look amazing ill admit. The problem is it does not seem like the top part of the protector wants to attach to the phone as if there is no adhesive. This is mostly my fault ill admit. I put it on wrong and what i did was take the bottom of nail and peeled it up and tried to re apply to adjust it. Is there any way I can maybe re ad the adhesive and how can I safely get off any lint or w/e that may have gotten onto the bottom of the screen protector? I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.
Click to expand...
Click to collapse
No such luck. They uses special adhesive. No way to remove dust. You have to be extremely careful when applying this glass protector....
Sgp won't help you because it's your fault for applying it incorrectly.
Sent from my Galaxy S too!
lambstone said:
No such luck. They uses special adhesive. No way to remove dust. You have to be extremely careful when applying this glass protector....
Sgp won't help you because it's your fault for applying it incorrectly.
Sent from my Galaxy S too!
Click to expand...
Click to collapse
Even if i just got the product there is nothing i can do to get a replacement? I mean isnt there like a 30 day thing if im not satisfied?
Yes there is, but you have to pay half of the price to get a new one
Sent from my SGH-M919 using Tapatalk 2
hmm ok well it cant be helped then :/ I really wanna like this product so i guess I dont mind doing that. sucks that they just take so damn long to ship -_- wish I could just pick it up at best buy or something
blackguy101 said:
hmm ok well it cant be helped then :/ I really wanna like this product so i guess I dont mind doing that. sucks that they just take so damn long to ship -_- wish I could just pick it up at best buy or something
Click to expand...
Click to collapse
Yeap, http://www.spigen.com/need1more
You have to be quick, there is a 30days time frame from when you purchased.
I must be just as bad. This is the most frustrating screen protecter to apply. I've been known to mess up once but never had this much problems. It floats off center, fingers holding it and getting in the way. Front plastic made it hard to estimate the edge with the rounded corners, getting caught as well on fingers as I let go pushing it slightly to one side. Unable to pry it back up without barely scraping the adhesive ruining one corner if not multiple edges from micro fuzz etc. The squeegee is worthless on the glass, back protector is fine but just have to deal with it.
Must be me. Oh well. Good thing I get the cheap ass protector with my Neo Hybrid case.
You tried the masking tape method?
Align it the screen protector without peeling off the back cover. Once it's in place, use making tape to hold it in place, like a book. Put some a strip from the front down across onto the phone. You should be able to "open" it like the page from a book. Then apply it. Should make things easier.
a Good company will stand behind their products. After seeing my brother's Hybrid case and reading some things on their customer service, I chose to pass on Spigen.
The clear coat on his bumper part is already chipping way, the whole thing looks like a cheap Chinese knock off ( bought directly from Spigen).
Zagg for example, a product I don't recommend at all because 1) It's a horrible product 2) it's ridiculously expensive. But the only thing they have is pretty much unquestioned replacements. Which I'm sure they can do because of ridiculous markup.
BTW, it might not be your fault at all, because these are rigid glass pieces, they have to be flat in order to stick to the phone. a SLIGHT imperfection will cause it to not stick.
All that being said, I went with MIME glass protector.
I have the glas t and I love it. They are much easier to apply then typical plastic ones as they dont bend and flop around when applying. When I applied mine it lined up perfectly but I did get lint under it right in the middle of the damn screen. I tried dealing with it but couldn't take it so I lifted it half way up with my finger nail and used scotch tape to get the lint off... dropped it back down and it looked even worse. I thought i wasted 27 bucks until the morning when I looked at my screen and bubbles were gone. So it is possible to remove lint just dont touch the adhesive.
Sent from my SPH-L720 using xda premium
just pay the half price spigen charges to replace it and move on. sulk it up as paying for a learning experience.
they already mention that the best method for aligning the thing is to use scotch tape on the top and bottom aligning it then drop down.
if you dont want any dust trapped, well don't mind me for stating the obvious but... don't work in a dusty room, close windows/doors turn off fans... don't breathe too hard on it lol.
use a photo air duster like a Rocket blower, to remove any left over dust/lint from cleaning the screen. I find that camera lens solution and lens paper works perfectly for prepping the surface. use the included stickers to remove any left over dust that cannot be blown away by the rocket blower.
if you can do not reapply once completely set down, when applying make sure it's aligned, bottom edges, make sure the gaps are evenly distributed on all sides, cutout holes centered...
when applying and you notice it is not centered gently lift up but never touch the adhesive side. lift up with only scotch tape.
I've been applying screen protectors for years and have gotten it down to a science... everyone comes to me to get theirs installed haha...
Once any part of this is adhered scotch tape is useless as it's glass. you have to use a suction cup or your finger nail you just have to be careful.
I install mine in the bathroom with the shower on hot. Let the steam take care of all the dust particles. I have been doing it this way for a awhile now and i never get dust under the screen.
Sent from my SCH-I545 using Tapatalk 4 Beta
i installed mines 5 days ago and got a 2mm air bubble on the right side of the home button i couldn't squeegee it out and doesn't seem to want to go away. has anyone else experienced this? is there anything i can do to get rid of it or will it eventually go away on its own? fortunately its not on the actual screen but its still an eyesore
i re applied my twice, wif no side effect, just dun touch the adhesive side, use industrial musking tape to lift it and for dust on under the screen, use scotch tape to remove it. key point is to never touch e adhesive side wif ur finger. nothing wrong wif this product, love it! its like the original screen, just tat if u really scratch it, u can remove it and there is the perfect screen below it.
btw for those tat claim it could b an production defects tat the glass is not perfectly straight, being in the glass industry for over 30 yrs, its actually easier and cheaper to create prefectly straight glass then any wif the slightest curve.
Sent from my GT-I9500 using xda premium
blackguy101 said:
So I just got this screen protector today and it does look amazing ill admit. The problem is it does not seem like the top part of the protector wants to attach to the phone as if there is no adhesive. This is mostly my fault ill admit. I put it on wrong and what i did was take the bottom of nail and peeled it up and tried to re apply to adjust it. Is there any way I can maybe re ad the adhesive and how can I safely get off any lint or w/e that may have gotten onto the bottom of the screen protector? I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.
Click to expand...
Click to collapse
Same thing happened to me so I had to return it. The install came out perfect but the top left did not want to seal/adhere properly. I was so disappointed so I just went with the tried and true zagg. I purchased the protector from eBay so the return policy is different from their website.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
just tried lifting up that part of the screen for a few seconds and putting it back down. this air bubble is like a giant zit that wont go away
blackguy101 said:
I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.
Click to expand...
Click to collapse
This is why I chose MIME. Email response is lightning quick and they include a hand written note in the package. Would definitely send you a new one without a question
Sent from my SGH-M919 using Tapatalk 2
The issue with it not laying after picking it up with your fingernail is not necessarily because the adhesive has gone bad. You need to level out the edge you stuck your nail under. Happened to me, fixed it with the squeege between the phone glass and the protector, prying up to level out the edge.
drbveb88 said:
I install mine in the bathroom with the shower on hot. Let the steam take care of all the dust particles. I have been doing it this way for a awhile now and i never get dust under the screen.
Sent from my SCH-I545 using Tapatalk 4 Beta
Click to expand...
Click to collapse
So installed my tr, first try no bubbles.Seriously looks and feels like the samsung glass. AMAZING!!!
The steam trick works. Its not like its a sauna and your phone is a steamy. The steam is like a static electricity to dust.
Sent from my SCH-I535 using xda premium