Related
Hello guys I'm here because my Atrix 2 will not turn on.
The only thing is the white LED lights ...
What should I do?!
thank you!
Hmmm... What were you doing prior to it not working? Dropped? Something minor occur resulting a reboot? When did you buy it? Finally... Any physical damage on the castor screen from impact damage?
I've rooted the phone, and before when I've reboot the battery appear on the screen...
I know with my captivate I used to be able to take the battery out, plug it in and it would boot. Try that... Yank tha battery, plug it in, and try to boot it
hi i have the same problem, i tried what you said but it still wont open.
i think its like a bug cause when i woke up it just stoped working with no reason!!!
p.s. sorry for my english
Try using the fxz file. My phone used to be glichy and do weird things. I flashed it and now it works fine.
Can u boot into AP fastboot mode?
no the phone is like totaly dead i cant even do a hard reset nothing at all....
could it be just a bad cable and it wont charge?
Do u still have the warranty? If so I'd just get a new one. It sounds to me like u have a bad phone! Did u get it from best buy?
no i just bought it from e-bay this phone is not yet released in europe
---------- Post added at 11:28 AM ---------- Previous post was at 11:19 AM ----------
"BOOM" the phone just opened by it self WTF is going on with motorolas? lol i am just happy for not losing my money.
Oh in Europe? I assumed u were in the states! My bad im sure u mentioned it. I just wasn't paying attention.... lol. So u see nothing at boot ? Not even the M in the start? Nothing at all?
Well the only thing I can think of at the moment is:
Press the volume buttons at the same time and hold them down.
Then press the power button.
In the menus look for AP fastboot.
If u can see that u can flash the fxz. Im sorry. Its 1:30 a.m. here in California! Im so tired. Im sorry if I couldn't help u! :-/
it was doing nothing at all it was totaly dead but some minutes later it just opened by it self and works great again what to say......those phones are going to get me crazy. lol
biupil said:
it was doing nothing at all it was totaly dead but some minutes later it just opened by it self and works great again what to say......those phones are going to get me crazy. lol
Click to expand...
Click to collapse
Now that its working, flash it and root. Get rid of all the bugs.
Upgrade to supercharged V5
Sent from my MB865 using xda premium
Yes flash the SuperCharged V5 Rom its awesome and battery life is great seems to have fixed a few glitches and now everything runs smooth and fast.
Glad you got your phone back on, now hope it stays on.
same here :c
biupil said:
hi i have the same problem, i tried what you said but it still wont open.
i think its like a bug cause when i woke up it just stoped working with no reason!!!
p.s. sorry for my english
Click to expand...
Click to collapse
the same thing happent to me, don't know what to do please help!
Same here with Romulus
biupil said:
no i just bought it from e-bay this phone is not yet released in europe
---------- Post added at 11:28 AM ---------- Previous post was at 11:19 AM ----------
"BOOM" the phone just opened by it self WTF is going on with motorolas? lol i am just happy for not losing my money.
Click to expand...
Click to collapse
The same thing happened to me after rooting and flashing Romulus. Used the phone a week or two, never rebooted it. Battery ran dead one night and wouldn't boot the next day. It seemed to not want to take the power from a usb hook up(pc), white lcd light and even self booted like in the quote here. Finally, during a self boot, plugged it in to a wall charger and it recharged no problem.
I definitely think there's a glitch with NO POWER AVAIL in this model's bootloader somewhere, and I'm in the US! Kinda afraid to turn the damn thing off again though...
Any delving would be nice!!!
Help us Obi Wan, You're our only hope!
buxtor said:
The same thing happened to me after rooting and flashing Romulus. Used the phone a week or two, never rebooted it.
Click to expand...
Click to collapse
It's not ROM related, it's dead battery and charge-mode related. I think that there is not enough battery to boot into charge mode. Power cycling can help if you catch it and plug in at the right time.. or you could always go MacGyver on it... see HERE for some previous discussion on this subject. Glad you got it to work, though.
Also, you need to reboot your phone more often than once a week (try like once every day or two) - or it can start to slow down and lag.
white led means insufficient power..
you need to use your wall charger...
what if there is no Led what so ever?
tried charging the battery and it seems it did, because it got a little hot
but stiLL didnt turn on a bit, its Like compLeteLy dead now.
i was trying to fLash the stock rom 4.0 with rsd Lite and when it 'reboot' to start doing its stuff, it never booted again
and after that im not able to see any lights on my phone, (tried aLL key combination)
(ceLLphone has no guarantee, bought it on ebay)
do i need to send it to a repair shop, or change the circuit board?
or just get another one?
Kurisoft said:
what if there is no Led what so ever?
tried charging the battery and it seems it did, because it got a little hot
but stiLL didnt turn on a bit, its Like compLeteLy dead now.
i was trying to fLash the stock rom 4.0 with rsd Lite and when it 'reboot' to start doing its stuff, it never booted again
and after that im not able to see any lights on my phone, (tried aLL key combination)
(ceLLphone has no guarantee, bought it on ebay)
do i need to send it to a repair shop, or change the circuit board?
or just get another one?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1937112
If I had a dollar for every time I said that, I'd be making money in a very weird way.
i saw that thread before and i couLdn't find it, thanx for the Link.
I got it rooted, I got a custom rom, didn't realize I needed to mount the system (never had that step before), then it got stuck at "Samsung" so tried going back to stock, and apparently flashed the wrong md5 file, or didn't flash all of them? I wasn't sure why four downloaded, and then bricked it. I've tried every trick I can find, battery, sd card & sim card out, plug into computer, hold down volume buttons, plug battery back in, nothing. It's simply not responding to anything. I did contact Samsung, since I read somewhere here someone else did a serious hard brick and Samsung replaced it for them, but also I was wondering about this:
http://forum.xda-developers.com/showthread.php?t=1242466
Has anyone tried it? How did it go? Would you recommend sending in my phone for replacement or would you recommend trying to make it unbrickable. I would ask the help of someone I know that does a lot of tiny computer work like this.
Thanks!
tspace75 said:
I got it rooted, I got a custom rom, didn't realize I needed to mount the system (never had that step before), then it got stuck at "Samsung" so tried going back to stock, and apparently flashed the wrong md5 file, or didn't flash all of them? I wasn't sure why four downloaded, and then bricked it. I've tried every trick I can find, battery, sd card & sim card out, plug into computer, hold down volume buttons, plug battery back in, nothing. It's simply not responding to anything. I did contact Samsung, since I read somewhere here someone else did a serious hard brick and Samsung replaced it for them, but also I was wondering about this:
http://forum.xda-developers.com/showthread.php?t=1245391
Has anyone tried it? How did it go? Would you recommend sending in my phone for replacement or would you recommend trying to make it unbrickable. I would ask the help of someone I know that does a lot of tiny computer work like this.
Thanks!
Click to expand...
Click to collapse
when plugging your phone into your PC, does the PC recognize it? how about ODIN? If not (for either), try re-booting your PC and try again.
If so, then use the "return back to stock" MD5 file with PIT file via ODIN
jco23 said:
when plugging your phone into your PC, does the PC recognize it? how about ODIN? If not (for either), try re-booting your PC and try again.
If so, then use the "return back to stock" MD5 file with PIT file via ODIN
Click to expand...
Click to collapse
No go.
Did you pull your battery
Plug into PC and use volume down to get into download mode
SENT FROM THE DOG POUND
---------- Post added at 08:37 AM ---------- Previous post was at 08:35 AM ----------
Oops sorry reread your post..
SENT FROM THE DOG POUND
cujo6801 said:
Did you pull your battery
Plug into PC and use volume down to get into download mode
SENT FROM THE DOG POUND
---------- Post added at 08:37 AM ---------- Previous post was at 08:35 AM ----------
Oops sorry reread your post..
SENT FROM THE DOG POUND
Click to expand...
Click to collapse
Yup. Tried that too. Tried volume up, tried everything about 10x over. :/ Thanks though.
I don't mind doing warranty exchanges for legitimate hardware issues, but if it's something I caused, I don't want to abuse the system. Honestly, if you can't get to download mode, suck it up and pay for this service: http://mobiletechvideos.mybigcommerce.com/samsung-droid-charge-jtag-brick-repair/
I'm not sure if unbrickable mod was every fully finished on this phone, and even if it was, it isn't exactly a beginner's mod.
shrike1978 said:
I don't mind doing warranty exchanges for legitimate hardware issues, but if it's something I caused, I don't want to abuse the system. Honestly, if you can't get to download mode, suck it up and pay for this service: http://mobiletechvideos.mybigcommerce.com/samsung-droid-charge-jtag-brick-repair/
I'm not sure if unbrickable mod was every fully finished on this phone, and even if it was, it isn't exactly a beginner's mod.
Click to expand...
Click to collapse
Yeah, I saw their service. And if I could afford them I would! One income family of 6, got my Droid Charge on CL for $65... I'll think it over though. I certainly understand what your saying!
I thought I read somewhere where you buy a Jig that you connect your phone that forces it into download mode
SENT FROM THE DOG POUND
---------- Post added at 08:57 AM ---------- Previous post was at 08:56 AM ----------
Are something like that
SENT FROM THE DOG POUND
cujo6801 said:
I thought I read somewhere where you buy a Jig that you connect your phone that forces it into download mode
SENT FROM THE DOG POUND
---------- Post added at 08:57 AM ---------- Previous post was at 08:56 AM ----------
Are something like that
SENT FROM THE DOG POUND
Click to expand...
Click to collapse
As far as I understand it, the Jig only works on soft bricks, not hard bricks.
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-download-mode-jig/
I don't know but maybe..
SENT FROM THE DOG POUND
---------- Post added at 09:01 AM ---------- Previous post was at 09:00 AM ----------
Read up you might get lucky
SENT FROM THE DOG POUND
tspace75 said:
No go.
Click to expand...
Click to collapse
with the battery in (or plugged in) and pressing the power button, do you at least get the Samsung logo or nothing?
if nothing, the battery could be completely drained. plug it in (to a wall, not PC) and leave it alone for a good 30 minutes - then check back to make sure that it has power (you might see the battery charging icon). after then, I would let the phone fully charge up and then try the ODIN process again.
cujo6801 said:
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-download-mode-jig/
I don't know but maybe..
SENT FROM THE DOG POUND
---------- Post added at 09:01 AM ---------- Previous post was at 09:00 AM ----------
Read up you might get lucky
SENT FROM THE DOG POUND
Click to expand...
Click to collapse
I'll give it a shot! Thanks!
jco23 said:
with the battery in (or plugged in) and pressing the power button, do you at least get the Samsung logo or nothing?
if nothing, the battery could be completely drained. plug it in (to a wall, not PC) and leave it alone for a good 30 minutes - then check back to make sure that it has power (you might see the battery charging icon). after then, I would let the phone fully charge up and then try the ODIN process again.
Click to expand...
Click to collapse
My battery was at a pretty good charge when I flashed the wrong thing. And after that it would never come on or do anything again. But it's worth a shot and I'll try it!
tspace75 said:
I'll give it a shot! Thanks!
My battery was at a pretty good charge when I flashed the wrong thing. And after that it would never come on or do anything again. But it's worth a shot and I'll try it!
Click to expand...
Click to collapse
then I'm pretty sure that could be the issue. that has happened to me once before where the battery just completely died on me, and not even plugging it in would cause it to boot up. give it some time...
Ok, I ordered a Jig from the guy on ebay, he makes them in the US, $5.50, free shipping, He even waterproofs them he says. I'm :fingers-crossed: it works before I try sending it off anywhere.
Charging the battery didn't produce anything :crying:
I suck!!!
I just saw (this morning) a vid of a captivate (or fascinate?) user who bricked his phone and couldn't get a response out of it. He then proceeded to rig an old charging head to run roughly 300 kilo ohms to the 4th and 5th pin. Once he plugged it in, the phone was forced into download mode immediately.
I won't be liable for anything I'm saying in this post, but I would suggest you take a look at that vid and see what you can come up with.
tspace75 said:
Ok, I ordered a Jig from the guy on ebay, he makes them in the US, $5.50, free shipping, He even waterproofs them he says. I'm :fingers-crossed: it works before I try sending it off anywhere.
Charging the battery didn't produce anything :crying:
I suck!!!
Click to expand...
Click to collapse
how long did you leave it in for? since you're not doing anything with the phone anyway, might as well leave it plugged in for a few hours...
jco23 said:
how long did you leave it in for? since you're not doing anything with the phone anyway, might as well leave it plugged in for a few hours...
Click to expand...
Click to collapse
Wrong. If the kernel is corrupted it won't charge. (at least that's what I've noticed) If you have a battery charger (I do since I keep spare batteries) that may work if it really is a dead battery.
If a USB jig doesn't work (it did for my friends Infuse, but I've never tried one on the Charge) then I'd go in and get it replaced.
Feign ignorance and tell them it won't turn on after you took the OTA.
Sent from my SCH-I510 using xda premium
kvswim said:
Wrong. If the kernel is corrupted it won't charge. (at least that's what I've noticed) If you have a battery charger (I do since I keep spare batteries) that may work if it really is a dead battery.
If a USB jig doesn't work (it did for my friends Infuse, but I've never tried one on the Charge) then I'd go in and get it replaced.
Feign ignorance and tell them it won't turn on after you took the OTA.
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
still doesn't hurt to leave it plugged in overnight or for a few hours - you can't re-fry it....
but agreed on the last part - tell them that the OTA bricked/fried your device
jco23 said:
still doesn't hurt to leave it plugged in overnight or for a few hours - you can't re-fry it....
but agreed on the last part - tell them that the OTA bricked/fried your device
Click to expand...
Click to collapse
Leave it plugged in overnight, then try the jig. Doesn't work, get it replaced.
Sent from my SCH-I510 using xda premium
Thanks for the responses everybody. I tried leaving it plugged in to just the wall charger, but seemed like the phone was heating up and nothing else was happening after an hour so I unplugged it. I don't think anything is physically fried, just really need to get the programming worked out.
They shipped the Jig already, and it's coming from the US, so it probably won't take but a couple of days to get here. I'll let you know as soon as it does and I get to try it!
Dog gone it though, I don't have a battery charger. I've got 4 batteries, and a battery charging station for my original Droid Inc, DH is using. I wish I wasn't so low on money! I would order the battery charger today too, just in case.
I was in recovery when starting to flash a new rom, and suddenly the phone shut down and now it will not start. What should I do?
dark'em said:
I was in recovery when starting to flash a new rom, and suddenly the phone shut down and now it will not start. What should I do?
Click to expand...
Click to collapse
i brick my phone too...
---------- Post added at 03:59 PM ---------- Previous post was at 03:56 PM ----------
just i get i black screen
leap_ahead said:
i brick my phone too...
---------- Post added at 03:59 PM ---------- Previous post was at 03:56 PM ----------
just i get i black screen
Click to expand...
Click to collapse
I restarted recovery and took the battery out just as the phone was supposed to restart, and I think I burned the battery pin connectors, I'll buy a new battery today and see if the phone charges, I'm hoping for the best
dark'em said:
I restarted recovery and took the battery out just as the phone was supposed to restart, and I think I burned the battery pin connectors, I'll buy a new battery today and see if the phone charges, I'm hoping for the best
Click to expand...
Click to collapse
when you turn on you dont see light on screen ?
leap_ahead said:
when you turn on you dont see light on screen ?
Click to expand...
Click to collapse
No it doesent turn on and I connected the battery to a PC speaker that I have and the sceaker made that sound that it usually does when connected to a power source so it is definitly not the battery problem, it's something to do with the rest of the phone. Since it doesent do anything I think it's dead :crying:
My phone died on me too, the last rom I installed on it was the cm-10.2-20130907-NIGHTLY-crespo.zip
I also have a similar problem - when traveling on a plane recently I pulled the battery. Since then the phone won't start - If i plug the charger in the screen flashes once briefly and then turns off without displaying anything. To make things worse the power button broke months ago.
Does anyone have any suggestion what to try before going to have it serviced?
Cheers
Last night I put my phone on the charger and fired up a TWRP backup. This morning I wasn't able to boot it. Tries two different chargers and it is a brick, The charging light won't come on at all. It's not the chargers, I have tested them with my nexus 5....
It's been on the charger for hours with no pulse. Need paddles...
Rooted but stock CM11s. Any suggestions how to get it back to life appreciated.
Have you tried connecting it to your PC? If so, what does it show up as in Device Manager?
Transmitted via Bacon
timmaaa said:
Have you tried connecting it to your PC? If so, what does it show up as in Device Manager?
Transmitted via Bacon
Click to expand...
Click to collapse
When I connect, there's no power in the phone at all so USB port never acknowledges connection.
Did you try plugging it in (ensure its really plugged in) and holding the device power button for a good 10-15 seconds? I know its a silly thing to ask.
zephiK said:
Did you try plugging it in (ensure its really plugged in) and holding the device power button for a good 10-15 seconds? I know its a silly thing to ask.
Click to expand...
Click to collapse
It's not a silly question but yes I tried the 'hold power button for 30 sec 5x' suggestion from OPO but nothing. Thanks
damage98 said:
It's not a silly question but yes I tried the 'hold power button for 30 sec 5x' suggestion from OPO but nothing. Thanks
Click to expand...
Click to collapse
I have the EXACT same problem.
I went to enter a wifi network password and settings kept crashing, so restored from a TWRP backup... and the boot up animation was just ongoing, over and over. (3 hours) - Now, when I plug it in occasionally, I get an error saying it can't start up.. please charge first. (But it doesn't charge and I get nothing).
---------- Post added at 09:33 AM ---------- Previous post was at 09:11 AM ----------
nufclad said:
I have the EXACT same problem.
I went to enter a wifi network password and settings kept crashing, so restored from a TWRP backup... and the boot up animation was just ongoing, over and over. (3 hours) - Now, when I plug it in occasionally, I get an error saying it can't start up.. please charge first. (But it doesn't charge and I get nothing).
Click to expand...
Click to collapse
Just going to have to RMA it... Which means I will have to buy another tempered glass screen and wait 7 days+ by the time they give me an RMA number, then maybe a further 7+ days for them to send me another one out.
arghh!
Wrong thread
Kawaisa said:
Whenever I try to send a text, I get the "x-app has been sending a large amount of texts" even though I haven't been sending many. Anyone know how I can fix this?
Sent from my One using Tapatalk
Click to expand...
Click to collapse
Why are you hijacking this thread asking a question that's completely irrelevant to the subject?
Transmitted via Bacon
nufclad said:
I have the EXACT same problem.
I went to enter a wifi network password and settings kept crashing, so restored from a TWRP backup... and the boot up animation was just ongoing, over and over. (3 hours) - Now, when I plug it in occasionally, I get an error saying it can't start up.. please charge first. (But it doesn't charge and I get nothing).
---------- Post added at 09:33 AM ---------- Previous post was at 09:11 AM ----------
Just going to have to RMA it... Which means I will have to buy another tempered glass screen and wait 7 days+ by the time they give me an RMA number, then maybe a further 7+ days for them to send me another one out.
arghh!
Click to expand...
Click to collapse
That sounds like the same problem for sure. Phones been on the charger all night but it's dead. I have not heard from one plus support yet.
So glad I kept my nexus. I think when I receive my warranty replacement I will just seek it for a small loss and wait for the nexus 6. I can't have a phone that I can't count on.
Sent from my Nexus 5 using Tapatalk
Edit - yeah wasted money on the orzly tempered glass protector as. well pfft.
timmaaa said:
Why are you hijacking this thread asking a question that's completely irrelevant to the subject?
Transmitted via Bacon
Click to expand...
Click to collapse
My mistake, wrong thread
damage98 said:
That sounds like the same problem for sure. Phones been on the charger all night but it's dead. I have not heard from one plus support yet.
So glad I kept my nexus. I think when I receive my warranty replacement I will just seek it for a small loss and wait for the nexus 6. I can't have a phone that I can't count on.
Sent from my Nexus 5 using Tapatalk
Edit - yeah wasted money on the orzly tempered glass protector as. well pfft.
Click to expand...
Click to collapse
I've got an idea for you (It worked for me - but I must admit... I was drunk and didnt think things through) if you still have % you might be in luck.
Go into TWRP, and format Data only. Then once it boots... Hold Power and volume up, so it resets... and hold power till its completely turned off, then plug it into mains. (This charged for me - but as I say, I tried to just restore again and got the stupid logo by whih point my battery was at the point of no return) - Still faulty if you ask me though.
nufclad said:
I've got an idea for you (It worked for me - but I must admit... I was drunk and didnt think things through) if you still have % you might be in luck.
Go into TWRP, and format Data only. Then once it boots... Hold Power and volume up, so it resets... and hold power till its completely turned off, then plug it into mains. (This charged for me - but as I say, I tried to just restore again and got the stupid logo by whih point my battery was at the point of no return) - Still faulty if you ask me though.
Click to expand...
Click to collapse
I have 0% so I can't even try that. Thanks though man.
Sent from my Nexus 5 using Tapatalk
nufclad said:
I've got an idea for you (It worked for me - but I must admit... I was drunk and didnt think things through) if you still have % you might be in luck.
Go into TWRP, and format Data only. Then once it boots... Hold Power and volume up, so it resets... and hold power till its completely turned off, then plug it into mains. (This charged for me - but as I say, I tried to just restore again and got the stupid logo by whih point my battery was at the point of no return) - Still faulty if you ask me though.
Click to expand...
Click to collapse
I managed to boot to twrp and I'm getting cannot mount errors, so I can't wipe. I tried to power it off and plug into mains but it's gone completely dead again.
damage98 said:
I managed to boot to twrp and I'm getting cannot mount errors, so I can't wipe. I tried to power it off and plug into mains but it's gone completely dead again.
Click to expand...
Click to collapse
If you can get back into twrp then hook it up to your computer. I usually don't use tool kits but have in a jam. Download this toolkit and try flashing stock from there. I had to being others back from the dead that way.
http://forum.xda-developers.com/showthread.php?p=53991768
Hope it works for you.
P.s. didn't mean to thumbs up your bad news post new theme wrong button.[emoji6]
Vortex1969 said:
If you can get back into twrp then hook it up to your computer. I usually don't use tool kits but have in a jam. Download this toolkit and try flashing stock from there. I had to being others back from the dead that way.
http://forum.xda-developers.com/showthread.php?p=53991768
Hope it works for you.
P.s. didn't mean to thumbs up your bad news post new theme wrong button.[emoji6]
Click to expand...
Click to collapse
Thank you. I've got it downloaded, hope I get to use it.
damage98 said:
I managed to boot to twrp and I'm getting cannot mount errors, so I can't wipe. I tried to power it off and plug into mains but it's gone completely dead again.
Click to expand...
Click to collapse
openrecovery-twrp-2.7.1.0-bacon.img + Wall Charger
just stay in recovery main menu , do nothing , it will be charging the battery.
that title 10% => 10%+ mean charging.
i belive the stock cm11s recovery doing the same way.
i did recovery charge test just now, the PhilZ Touch 6.55.0 one in adb shell:
<3>[ 19.791584] bad vbatdet:4250,default to 100mv
<6>[ 19.792889] bq24196_charge_en enable:1
it's working.
Had the same problem. Mine is working now!!!
I posted a video of how I got it back to life.
Check the description for the details if you don't want to watch.
https://www.youtube.com/watch?v=xLB4fhOyvuA&feature=youtu.be
jayb222 said:
Had the same problem. Mine is working now!!! I posted a video of how I got it back to life. Check the description for the details if you don't want to watch.
Click to expand...
Click to collapse
Thanks for the encouragement I'm glad yours finally started up. Mine has been on the charger for a day. Completely dead. I'll leave it unplugged over night and keep you posted. No reply from OPO support yet...
Sent from my Nexus 5 using Tapatalk
jayb222 said:
Had the same problem. Mine is working now!!! I posted a video of how I got it back to life. Check the description for the details if you don't want to watch.
Click to expand...
Click to collapse
Holy crap dude it worked. My opo is alive. It's at 3% and charging.
Sent from my Nexus 5 using Tapatalk
damage98 said:
Holy crap dude it worked. My opo is alive. It's at 3% and charging.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Haha that's awesome! Glad I could help. Welcome back! Be sure to give me a thumbs up on YouTube and comment letting people know it worked. Thanks!
Sent from my One
Hello guys,
My girlfriend's Oppo F1 just turned off after battery was fully discharged at night and doesn't turn on.
I've tried to charge it and turn on as well as tried to press power button + volume down button with no luck.
Any ideas on what we can do now?
OMG! After like 50 presses on power+volume down and power+volume up it finally turned on for some reason!
I don't get it actually but I'm glad it works now. Hope this thread will help someone.
wahhh.. i have the same issue but in different situation. I drained my phone un/intentionaly My battery got 2% and keep on playing games. However, while charging the charging response doesn't display. I tried to open but doesn't work. I charged it for 4-6 hours then, then try to hard press the power button but it doesn't turn on. It only blinks.. i don't know what to do then
same issue with my oppo F1 after it was drain last night, this is the 2nd time happen way back oct 2017 but i bring it to sm manila service center and i dont know what they do. they said i need to avoid drain the battery. may be i will bring it again to sm manila it only blink during charging( the led light on the upper right side). i charge it whole night and whole day but still nothing happen.
My oppo f1f dead phone
Guys gudevening. Me ask how to fix my dead phone oppo f1f after i reprogram to original version. And my computer state that "PCI DEVICE" not recognized. Pls help me guys. So many i search in youtube. But not working at me. So pls xda developer help me.
GrigoryS said:
OMG! After like 50 presses on power+volume down and power+volume up it finally turned on for some reason!
I don't get it actually but I'm glad it works now. Hope this thread will help someone.
Click to expand...
Click to collapse
is your phone had been dead
---------- Post added at 03:45 PM ---------- Previous post was at 03:44 PM ----------
GrigoryS said:
OMG! After like 50 presses on power+volume down and power+volume up it finally turned on for some reason!
I don't get it actually but I'm glad it works now. Hope this thread will help someone.
Click to expand...
Click to collapse
is your phone had been dead?
---------- Post added at 03:45 PM ---------- Previous post was at 03:45 PM ----------
GrigoryS said:
OMG! After like 50 presses on power+volume down and power+volume up it finally turned on for some reason!
I don't get it actually but I'm glad it works now. Hope this thread will help someone.
Click to expand...
Click to collapse
is your phone had been dead?
Same thing with me . can't open my phone now . My phone is been fix one time and it's ok when it was drained it turn back on black screen when i charge it or turn it on
---------- Post added at 01:47 AM ---------- Previous post was at 01:42 AM ----------
IamExile said:
Same thing with me . can't open my phone now . My phone is been fix one time and it's ok when it was drained it turn back on black screen when i charge it or turn it on
Click to expand...
Click to collapse
is there a way to jumpstart the phone ???