Database Info

Fastboot boot img

Hello all. Im new to this particular forum. I own a Galaxy Nexus, but I am unlocking/rooting my buddies One S for him. I have gone through the loops already; unlocked the bootloader, rooted, and installed custom recovery (CWM) with no issues. I was pleasantly surprised to find out that it was a snap compared to his previous HTC Legend. Nightmare.
Anyway, forgive me if this has in fact been answered as I have been searching. After a custom ROM is flashed you still have to flash a boot img via fastboot? I attempted to install CM10 yesterday and get stuck at the HTC boot screen?? Luckily I made a nandroid of the stock ROM and easily reverted. Where do I find the appropriate boot img? Is it just the img that is found in the unpacked ROM? Couldn't find anything pertaining to this in the ROM write up. I know with my Nexus you flash the ROM via recovery and that is it. Strange that you need to also flash the boot img following the ROM flash.
Any help is appreciated.

brunswick000 said:
Hello all. Im new to this particular forum. I own a Galaxy Nexus, but I am unlocking/rooting my buddies One S for him. I have gone through the loops already; unlocked the bootloader, rooted, and installed custom recovery (CWM) with no issues. I was pleasantly surprised to find out that it was a snap compared to his previous HTC Legend. Nightmare.
Anyway, forgive me if this has in fact been answered as I have been searching. After a custom ROM is flashed you still have to flash a boot img via fastboot? I attempted to install CM10 yesterday and get stuck at the HTC boot screen?? Luckily I made a nandroid of the stock ROM and easily reverted. Where do I find the appropriate boot img? Is it just the img that is found in the unpacked ROM? Couldn't find anything pertaining to this in the ROM write up. I know with my Nexus you flash the ROM via recovery and that is it. Strange that you need to also flash the boot img following the ROM flash.
Any help is appreciated.
Click to expand...
Click to collapse
Hello there, since you installed cwm recovery, you have to flash the boot.img via fastboot, if you have the twrp recovery you may not need to flash it via fastboot, it does it for you if you have an hboot under 1.14 but if its over that hboot your going to have to flash the boot.img for any Rom via fastboot. It still wouldn't hurt to flash the boot.img via fastboot but that's just me, well I hope I helped you and if I did then good, and if you wanna know more just ask...
If I helped then just press the thanks button
Sent from my One S

leohdz148 said:
Hello there, since you installed cwm recovery, you have to flash the boot.img via fastboot, if you have the twrp recovery you may not need to flash it via fastboot, it does it for you if you have an hboot under 1.14 but if its over that hboot your going to have to flash the boot.img for any Rom via fastboot. It still wouldn't hurt to flash the boot.img via fastboot but that's just me, well I hope I helped you and if I did then good, and if you wanna know more just ask...
If I helped then just press the thanks button
Sent from my One S
Click to expand...
Click to collapse
Got it to work. Thank you. :good:

brunswick000 said:
Got it to work. Thank you. :good:
Click to expand...
Click to collapse
Hi,
I was using CM10 and now I want to revert back to my previously used stock ROM. However after restoring I'm still unable to boot (I'm using ClockworkMod Touch). Do I need to flash the stock boot.img too? Where I can find it?
Thanks in advance!

TnTonly said:
Hi,
I was using CM10 and now I want to revert back to my previously used stock ROM. However after restoring I'm still unable to boot (I'm using ClockworkMod Touch). Do I need to flash the stock boot.img too? Where I can find it?
Thanks in advance!
Click to expand...
Click to collapse
Its in the rom.zip just extract it. Also look for Flash Image Gui in apps section as enables you too flash a boot.img direct from your phone whilst booted in a rom and will even extract the files for you from the new rom.zip!
Edit: Link to Flash Image Gui - http://forum.xda-developers.com/showthread.php?t=1954121

shadowch31 said:
Its in the rom.zip just extract it. Also look for Flash Image Gui in apps section as enables you too flash a boot.img direct from your phone whilst booted in a rom and will even extract the files for you from the new rom.zip!
Edit: Link to Flash Image Gui - http://forum.xda-developers.com/showthread.php?t=1954121
Click to expand...
Click to collapse
I can't find the zip file for stock HTC ROM
Anyway, I found the boot.img in the nandroid backup folder and it's all good now.
Thank you for the link! ^_^

I would also switch to TWRP. Seems to have less issues, if any, for most folks
Get it thru Goo Manager from PlayStore--

[Q] [Solved] Noob Root Questions - Seeking Guidance

Hello all,
I know everyone hates people who post without searching the forums first, but I did and I am still very lost on what all I need to do to root my device and get going flashing ROMs with the new 2.20 Root Method.
I have used this thread to get me started (http://forum.xda-developers.com/showthread.php?t=1684382&highlight=root+guide) and I have already downloaded Android SDK from google + Platform-tools + Google USB Driver but I don't want to get going on root because in the instructions from 2.20 Root it states:
10. After unlocking the bootloader, you can flash a custom recovery partition via fastboot, boot into recovery mode, and use a recovery ADB shell or install from an update.zip to install Superuser and su (I do not provide support for custom recoveries, but this is a straightforward process that other people can help with).
I have searched the above linked thread and cannot determine how to generate a custom recovery partition (unless I did when I used the command "adb -backup all" in the platform-tools folder of the Android SDK..Furthermore, I do not know what "Superuser and su" is referencing.
If anyone could point me in the right direction, I dont mind doing the reading myself but I have gotten bogged down in the details. Basically, I want to save all of you the trouble of another noob who has bricked their phone because they didn't do their homework. Thanks all for your help!

TheEmpyre said:
Hello all,
I know everyone hates people who post without searching the forums first, but I did and I am still very lost on what all I need to do to root my device and get going flashing ROMs with the new 2.20 Root Method.
I have used this thread to get me started (http://forum.xda-developers.com/showthread.php?t=1684382&highlight=root+guide) and I have already downloaded Android SDK from google + Platform-tools + Google USB Driver but I don't want to get going on root because in the instructions from 2.20 Root it states:
10. After unlocking the bootloader, you can flash a custom recovery partition via fastboot, boot into recovery mode, and use a recovery ADB shell or install from an update.zip to install Superuser and su (I do not provide support for custom recoveries, but this is a straightforward process that other people can help with).
I have searched the above linked thread and cannot determine how to generate a custom recovery partition (unless I did when I used the command "adb -backup all" in the platform-tools folder of the Android SDK..Furthermore, I do not know what "Superuser and su" is referencing.
If anyone could point me in the right direction, I dont mind doing the reading myself but I have gotten bogged down in the details. Basically, I want to save all of you the trouble of another noob who has bricked their phone because they didn't do their homework. Thanks all for your help!
Click to expand...
Click to collapse
I second this request. I feel like there are loads of helpful threads but after searching for a long time I don't see anything that leads someone new to Android rooting from stock 2.2 to having something like CM10 on their device. All of the write-ups I've found assume more experience than I have. Is there a general guide somewhere that I'm missing? Maybe something that explains rooting, backing up, flashing, etc. from start to finish where we can replace "this is where you root your device" with the new rooting method? I'm assuming it's out there but I can't seem to find it anywhere.

TheEmpyre said:
I have searched the above linked thread and cannot determine how to generate a custom recovery partition
Click to expand...
Click to collapse
You don't need to "generate" anything, not sure where you got that terminology from. Just install Goomanager from the Play Store and use that to install TWRP recovery.
---------- Post added at 09:20 AM ---------- Previous post was at 09:12 AM ----------
TheEmpyre said:
Furthermore, I do not know what "Superuser and su" is referencing.
Click to expand...
Click to collapse
In plain terms a superuser = a root user. But when discussed here, it usually references the app that manages what other apps have root access.
Superuser is required to perform root functions.
You can obtain the app various ways, all discussed here: http://forum.xda-developers.com/showthread.php?t=1954361

TheEmpyre said:
Hello all,
I know everyone hates people who post without searching the forums first, but I did and I am still very lost on what all I need to do to root my device and get going flashing ROMs with the new 2.20 Root Method.
I have used this thread to get me started (http://forum.xda-developers.com/showthread.php?t=1684382&highlight=root+guide) and I have already downloaded Android SDK from google + Platform-tools + Google USB Driver but I don't want to get going on root because in the instructions from 2.20 Root it states:
10. After unlocking the bootloader, you can flash a custom recovery partition via fastboot, boot into recovery mode, and use a recovery ADB shell or install from an update.zip to install Superuser and su (I do not provide support for custom recoveries, but this is a straightforward process that other people can help with).
I have searched the above linked thread and cannot determine how to generate a custom recovery partition (unless I did when I used the command "adb -backup all" in the platform-tools folder of the Android SDK..Furthermore, I do not know what "Superuser and su" is referencing.
If anyone could point me in the right direction, I dont mind doing the reading myself but I have gotten bogged down in the details. Basically, I want to save all of you the trouble of another noob who has bricked their phone because they didn't do their homework. Thanks all for your help!
Click to expand...
Click to collapse
ctennenh said:
I second this request. I feel like there are loads of helpful threads but after searching for a long time I don't see anything that leads someone new to Android rooting from stock 2.2 to having something like CM10 on their device. All of the write-ups I've found assume more experience than I have. Is there a general guide somewhere that I'm missing? Maybe something that explains rooting, backing up, flashing, etc. from start to finish where we can replace "this is where you root your device" with the new rooting method? I'm assuming it's out there but I can't seem to find it anywhere.
Click to expand...
Click to collapse
They are many simple tutorials for rooting but do not know why you guys having hard time. Ok here is
1) You got Android SDK from google + Platform-tools + Google USB Driver -
2) Only for windows - Download htc sync ( It will install necessary htc drivers) - Link
3) Just to check if htc drivers installed properly , open "C:\android-sdk\platform-tools" ( Or folder where adb and fastboot exists) then "Press shift + right click and select "Open command window here" ( open command prompt and cd "folder where adb and fastboot exists).
4) In command window type " adb devices" and see output - If you get output then htc drivers installed properly.
You can skip step 3 and step 4 - These steps are only for verification
5) Goto [ROOT] HTC One X AT&T 2.20 Firmware - X-Factor root exploit and follow the instructions there.
6) Once you successfully root your device using above exploit then goto - [How To] Flash Custom recovery and ROMS after 2.20 root complete the steps to flash custom recovery and if you want to flash ROMS
7) To unlock BOOT LOADER use this link - [INDEX] AT&T/ROGERS One X Resources Compilation Roll-Up , follow the instructions under " BOOTLOADER UNLOCK, SUPER CID, AND S-OFF"
You can also goto this link - [ROOT][2.20] One XL Bootloader unlock & Root guide By XsMagical - Very nice tutorial, if you find above links difficult to follow
Note* : During exploit or flashing recovery they talk about using fastboot commands, In order to execute them you need goto C:\android-sdk\platform-tools" ( Or folder where adb and fastboot exists) then "Press shift + right click and select "Open command window here" ( open command prompt and cd "folder where adb and fastboot exists) and then execute the commands ..
Advice - Do not flash any roms apart from xda

Thank you, abhipati. I haven't seen any simple tutorials that are complete. Everything seems to assume the user knows how to do something mentioned in another thread, which in turn seems to assume something else. Your post seems like a very clear start-to-finish explanation. Maybe it should be made into a stickie in Q&A. I can surely handle step 1 but maybe that could be explained (or at least a link added to an appropriate thread).
If all this is out there somewhere already then I certainly didn't know where to find it. I appreciate your help.

ctennenh said:
Thank you, abhipati. I haven't seen any simple tutorials that are complete. Everything seems to assume the user knows how to do something mentioned in another thread, which in turn seems to assume something else. Your post seems like a very clear start-to-finish explanation. Maybe it should be made into a stickie in Q&A. I can surely handle step 1 but maybe that could be explained (or at least a link added to an appropriate thread).
If all this is out there somewhere already then I certainly didn't know where to find it. I appreciate your help.
Click to expand...
Click to collapse
No problem.
Regarding step 1)
1) Download Android SDK from here {For Windows}
2) Download java you need it - here

Thank you all for helping gather some resources for me that I know are up to date etc. - Thankfully I do know a few unix commands so that I can navigate the command prompt aspects...I'm sure these threads get annoying so thank you very much for getting a new-to-root user up and running. I'll try this all later this evening and throw an update to let you all know how it goes -- hopefully no "bricked my phone" thread in the future

Excellent I have successfully unlocked my bootloader and achieved perm-root! Now on to flashing roms and I have some questions:
1) I have read GuyIncognito's instructions here (http://forum.xda-developers.com/showthread.php?t=1952076) on Flashing ROMs and how to go about doing that and i fully understand the process but I want to confirm (Yes I Have TWRP recovery installed and running) I only need to extract the boot.img out of the winRAR file of the ROM that I downloaded? (CM10 seems to be popular so I'm starting with that as my first ROM) There are so many other files in the package and I'm wondering why do you only need the boot.img file to be present with your adb and fastboot files from the google dev SDK -- the boot.img is only 5 MB and I can hardly believe that it constitutes the whole OS?
2) How do I go about installing gapps after I have flashed my ROM? I have downloaded Gapps so I have the file...do I place it in my SD Card and then enter recovery to install it? or Do have to use adb to flash it
Edit: I also have Superuser app on my stock ROM right now
Any further help is much appreciated, thank you very much.

Boot.img is technically just the kernel, it's the heart of the OS you are installing. Once extracted, rezip rom. Flash boot.img first using fastboot command prompt. Then flash the Rom itself that you rezipped through twrp
You can easily just flash gapps through twrp.
Sent from my HTC One XL using xda premium

InflatedTitan said:
Boot.img is technically just the kernel, it's the heart of the OS you are installing. Once extracted, rezip rom. Flash boot.img first using fastboot command prompt. Then flash the Rom itself that you rezipped through twrp
You can easily just flash gapps through twrp.
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
Thanks for the reply, the community on XDA kicks a$$, doing some additional reading just plz tell me if I understand this correctly...
1) Copy CM10 zip and Gapps zip into phone storage
2) Follow GuyIncognito's instructions on flashing boot.img
3) Boot into recovery AFTER Flashing boot.img
4) Select "Install" in TWRP
5) Install CM10 zip First
6) Install Gapps zip next
7) Reboot
8) profit?

TheEmpyre said:
Excellent I have successfully unlocked my bootloader and achieved perm-root! Now on to flashing roms and I have some questions:
1) I have read GuyIncognito's instructions here (http://forum.xda-developers.com/showthread.php?t=1952076) on Flashing ROMs and how to go about doing that and i fully understand the process but I want to confirm (Yes I Have TWRP recovery installed and running) I only need to extract the boot.img out of the winRAR file of the ROM that I downloaded? (CM10 seems to be popular so I'm starting with that as my first ROM) There are so many other files in the package and I'm wondering why do you only need the boot.img file to be present with your adb and fastboot files from the google dev SDK -- the boot.img is only 5 MB and I can hardly believe that it constitutes the whole OS?
2) How do I go about installing gapps after I have flashed my ROM? I have downloaded Gapps so I have the file...do I place it in my SD Card and then enter recovery to install it? or Do have to use adb to flash it
Edit: I also have Superuser app on my stock ROM right now
Any further help is much appreciated, thank you very much.
Click to expand...
Click to collapse
follow his instructions and you'll be fine
flash the boot.img in flashboot, reboot in recovery, flash your nameofrom.zip, flash your gapps pkg just like the rom (on your sd card), enjoy...
---------- Post added at 08:48 PM ---------- Previous post was at 08:45 PM ----------
TheEmpyre said:
Thanks for the reply, the community on XDA kicks a$$, doing some additional reading just plz tell me if I understand this correctly...
1) Copy CM10 zip and Gapps zip into phone storage
2) Follow GuyIncognito's instructions on flashing boot.img
3) Boot into recovery AFTER Flashing boot.img
4) Select "Install" in TWRP
5) Install CM10 zip First
6) Install Gapps zip next
7) Reboot
8) profit?
Click to expand...
Click to collapse
yes that;s correct you may wanna backup your sd card 1st as well and do a full wipe before flashing the rom.

Just in case your not familiar with fastboot, the command is fastboot flash boot boot.img
Sent from my HTC One XL using xda premium

Crappyvate said:
follow his instructions and you'll be fine
flash the boot.img in flashboot, reboot in recovery, flash your nameofrom.zip, flash your gapps pkg just like the rom (on your sd card), enjoy...
Click to expand...
Click to collapse
By Flash do you mean using TWRP recovery "install" feature and selecting the CM10.zip I have in my SD Card, and gapps? Just making sure I dont have to do it via command prompt cuz then I may have to do some additional reading
Edit: Just saw you all beat me to it, thanks all, will get back to you after I am running a ROM *crossfingers*

TheEmpyre said:
By Flash do you mean using TWRP recovery "install" feature and selecting the CM10.zip I have in my SD Card, and gapps? Just making sure I dont have to do it via command prompt cuz then I may have to do some additional reading
Click to expand...
Click to collapse
yes install. you dont need to do it from command prompt, additional reading is always good
even though it was put together a while back this http://forum.xda-developers.com/showthread.php?t=1678308 is a very good guide and covers a lot of things of course you should absolutely start here in redpoint indispensable guide to all the resources available to one xl http://forum.xda-developers.com/showthread.php?t=1671237
happy flashing

Alright Looks like I successfully flashed CM10! I flashed gapps with it at the same time but I have run into a problem -- It keeps telling me that all these gapps processes have failed and I have no access to a keyboard! Do I have to reflash gapps?

Hmm ok I think I messed up here....
My phone was essentially non-functional with CM10 -- Nothing worked and it took me a while to navigate to enable USB Debugging on the given mod. One I enabled USB Debugging in CM10 I ran the following:
adb reboot recovery
Once I was in recovery, I Restored a backup of my device that I made BEFORE I obtained permanent root via the toolkit as it was recommended during this time to make a recovery.
Recovery worked successfully, now after reboot it hangs on the HTC screen and then goes black, then reboots again, and again, and again...
I haven't been able to use the volume down + power button to even get back into the bootloader.....hopefully I am not screwed here...Any suggestions?

TheEmpyre said:
Hmm ok I think I messed up here....
My phone was essentially non-functional with CM10 -- Nothing worked and it took me a while to navigate to enable USB Debugging on the given mod. One I enabled USB Debugging in CM10 I ran the following:
adb reboot recovery
Once I was in recovery, I Restored a backup of my device that I made BEFORE I obtained permanent root via the toolkit as it was recommended during this time to make a recovery.
Recovery worked successfully, now after reboot it hangs on the HTC screen and then goes black, then reboots again, and again, and again...
I haven't been able to use the volume down + power button to even get back into the bootloader.....hopefully I am not screwed here...Any suggestions?
Click to expand...
Click to collapse
I think u need to flash that backups boot IMG

omario8484 said:
I think u need to flash that backups boot IMG
Click to expand...
Click to collapse
Yes that would make sense, but the problem is A) How do I access that backup's .img file? B) How can I enter bootloader again? It won't let me using Power+Vol Down, no matter how long I hold it for --- unless I need to hold it longer?

You have to hold it till the buttons flash and goes black... Hold for about 2-3 more seconds and release the power button, but keep the volume down held until you get to a white hboot screen. (it'll have three skating droids)
Sent from my HTC One XL using xda premium

InflatedTitan said:
You have to hold it till the buttons flash and goes black... Hold for about 2-3 more seconds and release the power button, but keep the volume down held until you get to a white hboot screen. (it'll have three skating droids)
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
Ok got it, did a factory reset then re-flashed CM10 boot.img...Flashed CM10 BY ITSELF this time, without doing gapps at the same time, rebooted into recovery after CM10 rolled up, then flashed gapps alone, everything is working smoothly! Now, time to restore my apps
Panicked momentarily, but now I'm back at it.
THANK YOU EVERYONE! Huge ups to all of you for helping a noob find his way

[Q] Rom flash AT&T HOX

I have successfully unlocked my bootloader and gained permanent root access to my HTC One X. I am preparing to flash a rom for the first time. Official cm10 version. I'm following the directions I have a link to from this post. Before I begin I hae one question. It shows opening android sdk file where I will finf adb files and fastboot, which from what I gather is where I will flash the boot.img first before flashing the rom zip. However, when I looked for those files and open X_Factor_Windows.... That is where I find the adb and fastboot files. Is that where I can proceed from? Thanks for the help. Also, as you can probably tell I'm scared to death to attempt this but I am very capable of following directions. If I don't make any mistakes is there any reason that I should not reboot into a new rom?

don't worry, i felt the exact same when i flashed my first rom a week ago
yes, perform the "fastboot flash boot boot.img" from the fastboot/XFactor folder with the boot.img from the cm10.zip copied to the fastboot/XFactor folder. then proceed to recovery and flash the cm10.zip + superSU + Gapps

http://forum.xda-developers.com/showthread.php?p=33303798
Go to this thread and go down to question #4. good luck
One other thing... please make sure you have the dual core and not the quad core HTC one x? If yours is an international HTC this guide will soft brick.
Sent from my One X using xda premium

[Q] One last question before my first flash into the team viper rom

First let me say thanks for everyone's help! These forums have been GREAT! Now onto my question. I have successfully rooted my phone (2.20) and installed permaroot, and TWRP. I've backed up my stock rom using TWRP. If I want to install the Venom Viper XL rom, but want to make sure I do it correctly. I've downloaded the latest rom (3.1.0), verified the checksum. I've watched some videos on youtube that show how to flash roms using TWRP, however there is a statement in thread regarding the viper xl rom that is confusing to me. This is the statement that I'm not sure about:
"If you have 1.14 hboot you will need to flash the boot.img in fastboot. You will need to extract this from the ROM zip. I have found the following tool useful: [TOOL] HTC Auto Boot.img Installer (One Click Tool)"
I have hboot 1.14 on my phone. Based on this, do I still need to flash the boot.img that's included in the zip file to my phone using ADB before I flash the rom? I'm wondering if this is separate from TWRP or in addition to TWRP.
Thanks for any feedback here to a total noob!

Yes sir and use fastboot place the bootimg in the same folder as your fastboot exe and goodies... Open a command prompt there and have your phone in fastboot mode type fastboot flash boot boot.img

If you're hesitant. About fastboot, you can also download flash gui from here in the apps & themes section or support the dev and get it from the play store.
Then all you simply do is open the app, point to the rom zip and flash it. When it's done you just manually reboot your phone instead of clicking the radio button in the app. Boom. Wipe system and factory reset inside of twrp and follow Viper ROM instructions. Enjoy!
Sent from my HTC One XL using Tapatalk 2

THANKS guys! Just flashed it, and it worked GREAT! I LOVE JELLY BEAN!!!!

opto_isolator said:
THANKS guys! Just flashed it, and it worked GREAT! I LOVE JELLY BEAN!!!!
Click to expand...
Click to collapse
This is your place for all questions answered. Don't be afraid to ask if you can't find your answer. Viper is an awesome rom and can be tweaked to speed. Enjoy the tweaks too but be sure to make a backup in twrp when you get it the way you like it. If you can figure that one out, simply go into recovery and select BACKUP. It will ask you to swipe for backup then. Then it will reboot. Then if you want a kernel (not much you can do but overclock right now) use the flash gui app for that too. Same as if you used it flash the boot img. I'd recommend ElementalX1.5. :beer:
Sent from my HTC One XL using Tapatalk 2

[Q] how to flash - really in trouble

Hi all,
Apology if this questions may already been ask millions of time but I am really stucked at the moment and hoping that someone may guide me to the correct direction.
I have got HTC One X-LTE (Evita)
I managed to get S-OFF and also CID - 111111
It has TWRP 2.6
The last time I got it working was on the STOCK 4.2.2 I downloaded from the XDA - then I got into the issues of rebooting and loosing signal from time to time. so I went into my TWRP backup I had and reflashed it using my old backup made from my TWRP.
the reflashed failed and now I can only boot up to the HTC logo and then black screen.
I can get to the TWRP recovery and I have got fastboot and ADB on my PC.
When I run the fastboot devices command --> it shows device connected BUT when i try ADB command ---> no device is found.
It will be much appreciated if someone can guide me to the right direction as I am really stucked at the moment not sure where to start.
I tried searching in the forum but I don't think I went to the correct area/tutorial.
Please help
Thank you

When you made your twrp backup did you select system,data, and boot? If it's hanging at the HTC screen it seems there is not boot.img installed or one that is incompatible with your backup. Open whatever Rom your backup is made from and copy the boot.img to your fastboot directory. Then reboot the phone into fastboot mode and flash the boot.img using this command.
Fastboot flash boot boot.img
Then reboot the phone and see what happens
Sent from my HTC One XL using Xparent Red Tapatalk 2

ImagioX1 said:
When you made your twrp backup did you select system,data, and boot? If it's hanging at the HTC screen it seems there is not boot.img installed or one that is incompatible with your backup. Open whatever Rom your backup is made from and copy the boot.img to your fastboot directory. Then reboot the phone into fastboot mode and flash the boot.img using this command.
Fastboot flash boot boot.img
Then reboot the phone and see what happens
Sent from my HTC One XL using Xparent Red Tapatalk 2
Click to expand...
Click to collapse
Thanks for the reply.
When looking at the TWRP backup I copied into my PC - does not have the .img - the one I can find is MD5
Can I use the existing ROM I donwload from XDA like : EVITA_UL_JB_50_S_TMO_DE_5.08.111.2_By_Turge.zip
when I extracted EVITA_UL_JB_50_S_TMO_DE_5.08.111.2_By_Turge.zip - I can see the "boot.img" can I use this one?
Thanks

ardabelati said:
Thanks for the reply.
When looking at the TWRP backup I copied into my PC - does not have the .img - the one I can find is MD5
Can I use the existing ROM I donwload from XDA like : EVITA_UL_JB_50_S_TMO_DE_5.08.111.2_By_Turge.zip
when I extracted EVITA_UL_JB_50_S_TMO_DE_5.08.111.2_By_Turge.zip - I can see the "boot.img" can I use this one?
Thanks
Click to expand...
Click to collapse
I had a somewhat similar experience with Viper 4.0 ROM - I managed to get Cyanogenmod installed correctly (particularly this one). Take a shot and see if it works - atleast your phone will be up and working.

sandys1 said:
I had a somewhat similar experience with Viper 4.0 ROM - I managed to get Cyanogenmod installed correctly (particularly this one). Take a shot and see if it works - atleast your phone will be up and working.
Click to expand...
Click to collapse
Hi Sandy,
I tried the link but I think it is broken link.
Can you please let me know which one is the link .
Cheers

ardabelati said:
Hi Sandy,
I tried the link but I think it is broken link.
Can you please let me know which one is the link .
Cheers
Click to expand...
Click to collapse
hmm - Im on ROM dated 09/13, which is not present now. Your best bet would be http://get.cm/get/aOM
Also remember to flash Google Apps (play store, etc.) which is packaged separately here - http://goo.im/gapps/gapps-jb-20130813-signed.zip

ardabelati said:
Hi Sandy,
I tried the link but I think it is broken link.
Can you please let me know which one is the link .
Cheers
Click to expand...
Click to collapse
Did it work finally ?

sandys1 said:
Did it work finally ?
Click to expand...
Click to collapse
Hi Sandy
Thank you again for your help
I finally got my phone at least booting again.
What i did was I went to the fastboot and then correct to the PC and when it was asking for format the drive, I did format it (fingers crossed) and luckily it let me see the ROm I downloaded from the Stock 4.2.2 Turge version.
Now my problem is that the phone keeps rebooting.
I don;t know how to flash the kernel as suggested on the front page of the thread.
What is the most stable ROM at the moment?
I want to learn how to flash and fix this - I have kept reading post after post but I still can not get myself to where I want it to be which is fixing the reboot issue from the STOCK 4.2.2 Turge version.
I am a real newbie so I am not too familar with some of the fancy terms people use.
Any help is greatly appreciated.
Thanks again

ardabelati said:
Hi Sandy
Thank you again for your help
I finally got my phone at least booting again.
What i did was I went to the fastboot and then correct to the PC and when it was asking for format the drive, I did format it (fingers crossed) and luckily it let me see the ROm I downloaded from the Stock 4.2.2 Turge version.
Now my problem is that the phone keeps rebooting.
I don;t know how to flash the kernel as suggested on the front page of the thread.
What is the most stable ROM at the moment?
I want to learn how to flash and fix this - I have kept reading post after post but I still can not get myself to where I want it to be which is fixing the reboot issue from the STOCK 4.2.2 Turge version.
I am a real newbie so I am not too familar with some of the fancy terms people use.
Any help is greatly appreciated.
Thanks again
Click to expand...
Click to collapse
It sounds like it might be a bad download or something. I noticed u never mentioned wiping the phone before flashing, Are u clean wiping? And also what hboot are you on?
Sent from my HTC One X using xda app-developers app

ardabelati said:
Hi Sandy
Thank you again for your help
I finally got my phone at least booting again.
What i did was I went to the fastboot and then correct to the PC and when it was asking for format the drive, I did format it (fingers crossed) and luckily it let me see the ROm I downloaded from the Stock 4.2.2 Turge version.
Now my problem is that the phone keeps rebooting.
I don;t know how to flash the kernel as suggested on the front page of the thread.
What is the most stable ROM at the moment?
I want to learn how to flash and fix this - I have kept reading post after post but I still can not get myself to where I want it to be which is fixing the reboot issue from the STOCK 4.2.2 Turge version.
I am a real newbie so I am not too familar with some of the fancy terms people use.
Any help is greatly appreciated.
Thanks again
Click to expand...
Click to collapse
You can either flash the kernel, which can be found in the Android Development section, flashing the kernel is just like flashing a ROM, just install in Beastmode. Or you can upgrade your firmware to 2.15, the instructions are I'm the first post of the ROM thread.
Asking which ROM is best/favorite/most stable is against the rules so we can't answer that question.
When you say the phone keeps rebooting, does it ever make it into the OS or is it boot looping (showing the boot animation then starting over)?
Sent from my Evita

timmaaa said:
You can either flash the kernel, which can be found in the Android Development section, flashing the kernel is just like flashing a ROM, just install in Beastmode. Or you can upgrade your firmware to 2.15, the instructions are I'm the first post of the ROM thread.
Asking which ROM is best/favorite/most stable is against the rules so we can't answer that question.
When you say the phone keeps rebooting, does it ever make it into the OS or is it boot looping (showing the boot animation then starting over)?
Sent from my Evita
Click to expand...
Click to collapse
Thanks for the reply
When you said that flashing kernel is the same as flashing ROM, I did it By going to TWRP and the press install and locate the zip file. Is this what should be done?
What is beast mode?
Sorry for the basic questions
Thanks

Yeah that's how you install the kernel. It must be done after you install the ROM. I kinda worded my reply a bit weird, sorry about that. Beastmode is the name of the kernel, you can find it here:
http://forum.xda-developers.com/showthread.php?t=2165880
Sent from my Evita

I did try to flash it through recovery but it always failed. Not sure why. I copied the kernel zip file into my phone sd and then I went to recovery and press the install and located the kernel zip file but still failed.
Sent from my HTC One XL using Tapatalk 2

Which recovery version are you using?
Sent from my Evita

Recovery is 2.6.3.
The process failed on not able to fine the MD5 file or something like that. We don't need to extract the Zip file do we?
Cheers

Disable md5 checking in settings. You never need to extract a kernel or ROM zip.
Sent from my Evita

timmaaa said:
Disable md5 checking in settings. You never need to extract a kernel or ROM zip.
Sent from my Evita
Click to expand...
Click to collapse
I have checked the setting in TWRP and nothing is ticked.
When I flash the zip, it is still saying "failed due to md5 does not exists".
I am not sure which should be address first but I now noticed that there is an error : "unable to locate storage device"
also came out.
When I plug my phone to PC I can see the storage but why it is saying "storage device not found" in TWRP?
Thanks