Related
Hiya,
After dealing with a half-bricked Xoom, I did some research on this problem and found a solution.
If in any case, you happen to get stuck on the "Motorola Dual-Core Technology"
Solution to this (For the MZ604, One-Click rooted):
MZ604 Stock .imgs Download: http://developer.motorola.com/products/software/
*Make sure you have fastboot in the same directory as your adb for easy access*
1. Plug in your USB cord
2. Turn off your Xoom (Vol-Up + Power)
3. Boot into fastboot (Vol-Down + Power)
4. On your computer, open up a command prompt, and type the following:
Code:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot oem lock
-or-
Code:
fastboot flash boot <path to boot.img>
fastboot flash system <path to system.img>
fastboot flash recovery <path torecovery.img>
fastboot flash userdata <path userdata.img>
fastboot erase cache
fastboot oem lock
5. Reboot the Xoom
Code:
fastboot reboot
6. There you go, back to stock!
On the real though, if you can get to Fastboot (or even the Moto "Android Recovery" state), you're not THAT bricked you've got to relock and go back to out-of-box; just keep a known-good boot.img around somewhere.
You just saved my life!
Thanks for sharing OP.
I take it this method is the same for 3.1?
I hope this works. Although, I can't turn my xoom off. It also appears that my computer will not recognize my device when it is plugged in. In addition, I can't turn off my Xoom? It just reboots... so I can't enter fastboot mode.
I just posted this in a new thread.
Lcsglvr said:
I tried reverting back to stock using the "one click" root/unroot tool that was the first to come out for the Xoom.
Anyway, I tried the unroot process and everything was going fine, until something occurred. Now, it tries to boot up and says at the Moto Dual Core Technology screen, "Failed to boot LNX 0x0004 // Starting RSD mode 2".
Can someone help
Click to expand...
Click to collapse
Can anyone help!
Lcsglvr said:
I hope this works. Although, I can't turn my xoom off. It also appears that my computer will not recognize my device when it is plugged in. In addition, I can't turn off my Xoom? It just reboots... so I can't enter fastboot mode.
I just posted this in a new thread.
Can anyone help!
Click to expand...
Click to collapse
same here, anyone help ((
Lcsglvr said:
I hope this works. Although, I can't turn my xoom off. It also appears that my computer will not recognize my device when it is plugged in. In addition, I can't turn off my Xoom? It just reboots... so I can't enter fastboot mode.
I just posted this in a new thread.
Can anyone help!
Click to expand...
Click to collapse
You can still enter fastboot if you xoom won't shut off. Just hold the appropria oncete buttons as it reboot. Happened to me last night upgrading to 3.1. It. Wouldn't shut down at all. Once I got into fastboot my computer saw it and I was able to fix
Honestly, I almost went through all of this last night when my WIFI Xoom got stuck in a boot loop.
However, I noticed that when my recovery went to flash the new 3.1 file, I felt like it didn't take as long as it should have. The file was the right size and all and it even said that everything installed successfully, but it just kept boot looping regardless of trying over and over. So I went ahead and re-downloaded the 3.1 file and repeated the steps to flash it and everything worked.
So, before you spend a whole lot of time restoring your Xoom, simply re-download the files and try it one more time. It worked for me.
rebill said:
You can still enter fastboot if you xoom won't shut off. Just hold the appropria oncete buttons as it reboot. Happened to me last night upgrading to 3.1. It. Wouldn't shut down at all. Once I got into fastboot my computer saw it and I was able to fix
Click to expand...
Click to collapse
Thanks! Finally have some hope to recovering. I'll post steps I took later once I get this damn thing fixed.
hmmm... I'm in fastboot supposedly and tried to flash boot.img but it seems to be stuck at <waiting for device>
This happen to anyone else?
After search seems like a driver issue, but I have installed the drivers... I was previous rooted, so I know I have the drivers. Just to be sure, I ran the MotoHelper again. I don't understand. It's just seeing my device on the "Starting Fastboot protocol support."
help?
Lcsglvr said:
hmmm... I'm in fastboot supposedly and tried to flash boot.img but it seems to be stuck at <waiting for device>
This happen to anyone else?
After search seems like a driver issue, but I have installed the drivers... I was previous rooted, so I know I have the drivers. Just to be sure, I ran the MotoHelper again. I don't understand. It's just seeing my device on the "Starting Fastboot protocol support."
help?
Click to expand...
Click to collapse
Yes. How did I fix it? I returned the xoom and had a new one two days later.
If the screen says something like "Entering RSD 2" then you're boned. The xoom won't be recognized in either the current state or in fastboot state by the computer, so no amount of commands will help. Even having the stock images doesn't help with that. Even RSDLite can't see the xoom in that state.
There have been several reports of people just being honest to Motorola and them fixing the device under the warranty.
Hmm honesty. I'll give it a shot.
Sent from my ADR6300 using XDA App
Is the final OEM lock necessary? It's quite a pain as your userdata gets wiped if you unlock it...
I was stuck on bootloop, with unrecognised device, through adb was able to get back into clockwork recovery somehow at first boot, think twice down volume? Could be wrong.
I was able tto rreflash zip 3.1 over thet top again.
sry if this is different and unhelpful, bu imagine things are pretty desperate if you are considering returning the device
zerin said:
Yes. How did I fix it? I returned the xoom and had a new one two days later.
If the screen says something like "Entering RSD 2" then you're boned. The xoom won't be recognized in either the current state or in fastboot state by the computer, so no amount of commands will help. Even having the stock images doesn't help with that. Even RSDLite can't see the xoom in that state.
There have been several reports of people just being honest to Motorola and them fixing the device under the warranty.
Click to expand...
Click to collapse
You're not boned at all. I had that happen to me so I just got back into fastboot, downloaded the files in the OP put ADB, Fastboot and the adb extensions into the file I downloaded then ran the commands and got me XOOM back up and running fine.
jbartcaps said:
You're not boned at all. I had that happen to me so I just got back into fastboot, downloaded the files in the OP put ADB, Fastboot and the adb extensions into the file I downloaded then ran the commands and got me XOOM back up and running fine.
Click to expand...
Click to collapse
You were likely in RSD 3, which is recognized by the computer. RSD 2 means adb and fastboot cannot see the device at all, so no flashing images is possible.
There's several states that all look very similar. Because some success was had with one doesn't mean it works for all. Motorola recognizes and is telling users that, in this state, the device needs to be sent back to them.
Can someone help us wifi xoom. Im stuck on the motorola screen and have a lil experience. I can fast boot reboot/fastboot device and it work but cant get the files from the hwi69 to fastboot on to it. I think im entering the commands wrong. Any advice would be appreciated
TheRedDroid said:
Hiya,
After dealing with a half-bricked Xoom, I did some research on this problem and found a solution.
If in any case, you happen to get stuck on the "Motorola Dual-Core Technology"
Solution to this (For the MZ604, One-Click rooted):
MZ604 Stock .imgs Download: http://developer.motorola.com/products/software/
*Make sure you have fastboot in the same directory as your adb for easy access*
1. Plug in your USB cord
2. Turn off your Xoom (Vol-Up + Power)
3. Boot into fastboot (Vol-Down + Power)
4. On your computer, open up a command prompt, and type the following:
Code:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot oem lock
-or-
Code:
fastboot flash boot <path to boot.img>
fastboot flash system <path to system.img>
fastboot flash recovery <path torecovery.img>
fastboot flash userdata <path userdata.img>
fastboot erase cache
fastboot oem lock
5. Reboot the Xoom
Code:
fastboot reboot
6. There you go, back to stock!
Click to expand...
Click to collapse
Very good info to get into fastboot protocol:
Much thanks for the info. Worked like a champ. On an updated 3.2.1 XOOM I did an unlock, re-locked the wrong way, soft bricked, unbricked back to locked state. Finally followed your steps applied stock files and XOOM is re-locked and stock rocking back at 3.01. I needed to do all this to make sure I could get it back to stock in case it goes back to BB in 2 weeks. I was lucky enough to find one at a BB just not sure if I'll keep it. I plan on trying out some roms plus I heard Motorola is planning on doing an ICS push to the XOOM. ICS is very nice. It runs great on my unlocked Verizon G-Nex.. Again Thanks..
This post not only saved my half-bricked non-rooted Xoom, but also let me flash it from the Singapore firmware (bought if from Amazon, don't ask lol) to the regular USA firmware so that I can properly root it!
Thank you so very much!!
The other day my WiFi Xoom stopped getting past the "Motorola Dual Core" screen.
I have removed the SD card.
Android recovery mode gives me the error android with the "!"
It does this plugged in or on battery.
Not rooted.
What else should I try?
neoka said:
The other day my WiFi Xoom stopped getting past the "Motorola Dual Core" screen.
I have removed the SD card.
Android recovery mode gives me the error android with the "!"
It does this plugged in or on battery.
Not rooted.
What else should I try?
Click to expand...
Click to collapse
What were you trying to do before this hapened? Need more info to be able to help.
24348542 26
DavilaDarkness said:
What were you trying to do before this hapened? Need more info to be able to help.
Click to expand...
Click to collapse
Hadn't really done anything. Just normal use. No out of the ordinary installs. Turned it off. Next day I tried turning it on and it won't boot.
Did you ever resolve this ?? I was give one to repair for a child and it too is stuck on the red boot screen. The good thing is the person who sold it to them was a hacker and put TWRP on it of all things. I was floored when I tried to enter recovery and found teamwin.
but the problem is its still stuck on the boot screen, i did flash it 3-4 times with M604 M602 flashes and some other customs but nothing works, it completes flashing and wiping caches but always goes back to stuck on boot screen..
perhaps I have to unclock the bootloader or something for the flash to be succesfull ?
Just wanted to say I fixed it with these commands and firmware if anyone is interested. I tried everything else including flashing with twrp and wiping all caches and it didn't work, getting the stock firmware and doing it like this worked to clear boot screen endless stuck
download fastboot and adb and xoom drivers 6.4 (about 5mb) and the appropriate stock firmware. for me it was ZM604
at the command type
adb reboot bootloader
you may need to unplug and replug cable after it goes in fastboot mode.
fastboot devices
.. should return something "02a439cj0skjdke fastboot" to proceed.
fastboot oem unlock
.. look at your tablet and follow the instructions, for me it was down twice and up once to accept unlock conditions, then it reboots
on reboot press vol down 2 seconds after you see moto logo, it will enter fastboot
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot erase userdata
fastboot reboot
no need to relock after, you will see android logo and first boot pop up after 2-3 mins
Purchased an Lg Gpad 7 Wifi tablet (v400) 2 weeks ago. Came with preinstalled Lollipop android so i couldnt install a recovery rom to flash any other custom roms. Downgraded to Kitkat version following the instructions on Xda forums and succesfully installed Twrp. When i installed Cyanogenmod 12.1 through Twrp i got stuck in fastboot screen.
Any suggestions and / or solutions would be greatly appreciated.
I had a similar problem.. Only mine was stuck at the bootloader. Go in TWRP and repair /data and other partitions. My data partition gave me an error since F2FS is a little flaky and some ROMs corrupted it (claimed they supported it). I would recommend erasing the system, cache and data partition if you can't get into TWRP.
The problem is i cant get out of fastboot whatever i try. It says start on bootloader but the tablet just restarts on an empty screen doing nothing.
Hakalai said:
The problem is i cant get out of fastboot whatever i try. It says start on bootloader but the tablet just restarts on an empty screen doing nothing.
Click to expand...
Click to collapse
if you have an sd card, try removing that, then reboot.
if that doesnt work, try entering fastboot command, fastboot continue
Tried without sdcard and i get the same fastboot screen.
How can i give any commands? The only options i have are Restart Bootloader / Restart / Power off. Tried restarting bootloader but i get nothing in return tablet just stays on with nothing on screen.
Hakalai said:
Tried without sdcard and i get the same fastboot screen.
How can i give any commands? The only options i have are Restart Bootloader / Restart / Power off. Tried restarting bootloader but i get nothing in return tablet just stays on with nothing on screen.
Click to expand...
Click to collapse
you said it was stuck on fastboot, if thats the case, install any needed drivers on your pc, connect device to it, open a terminal in the fastboot dir (after you go get fastboot), then try those commands i gave. you could also try, fastboot reboot dont think i mentioned that before.
bweN diorD said:
you said it was stuck on fastboot, if thats the case, install any needed drivers on your pc, connect device to it, open a terminal in the fastboot dir (after you go get fastboot), then try those commands i gave. you could also try, fastboot reboot dont think i mentioned that before.
Click to expand...
Click to collapse
Did as you said but every command i gave gives me an error message in adb terminal. There are new lines in fastboot menu in tablet now. Bottom two are SECURE BOOT - enabled & LOCK STATE - locked.
Hakalai said:
Did as you said but every command i gave gives me an error message in adb terminal. There are new lines in fastboot menu in tablet now. Bottom two are SECURE BOOT - enabled & LOCK STATE - locked.
Click to expand...
Click to collapse
hmm, ok, im guessing it would have said that normally, when not broken. all the command does is try to release it past where its stuck. it doesnt actually flash, lock, unlock, or change anything.
imo, this seems good, because now we know fastboot is working.
i own lg devices, but not your specific device. i would hate to give you some bad advice and make your tablet broken more, but if it were me in this situation, i would try to flash the factory KK firmware you used to downgrade with odin or however you did it. hopefully, that will clean everything up and let it boot properly.
if for whatever reason you cant do that, we could try extracting the factory file, and just flashing recovery and system, those should be the only things that got changed putting on twrp and cm normally.
Sorry, I have the serious proplem wtih my LG pad V400, I rooted it and using <LG Flash Tool 2014> with <V40010c_00.kdz> to downgrate the firmware but their is error then my LG pad stuck in fastboot menu as with just turn off, restart and restart bootloader. if i seclect one one them the tablet just logged again the fastboot menu
it stuck on the fastboot menu and i cannot do nay think with it. I can restart with factory restore mode but when select yes to restore, it will restart and log in fastboot menu again.
I downloaded adb and fastboot program and put in one folder <Minimal ADB and Fastboot> in C:\Program Files (x86)\Minimal ADB and Fastboot
I dont have recovery image so i download file <cm-13.0-20160421-NIGHTLY-v400-recovery.img> form your link to download TWRP file
move it to folder of fastboot programe and changed its name to <recovery.img>
I turn on the tablet and it waited at fastboot menu
when i run the command <fasboot flash recovery recovery.img> and they said some thing wrong like in picture
please help me
after using command fast boot flash recovery boot.img my phn got stuck in blue light...command prompt shows' waiting for device'..how long it will take to flash twrp or am i got stuck!!!pls help me
XDA Visitor said:
after using command fast boot flash recovery boot.img my phn got stuck in blue light...command prompt shows' waiting for device'..how long it will take to flash twrp or am i got stuck!!!pls help me
Click to expand...
Click to collapse
Hello, and welcome to XDA!
Does not sound like anything ill was done, as it did not connect. This could be a cause of one of three things:
Phone is not in the bootloader
Even if in the bootloader, fastboot mode is not activated
PC drivers for fastboot may not be appropriate (or maybe even an outdated fastboot program)
To help you further, can I get the make, model and carrier (if bought through said carrier) of your phone?
Many thanks.
Hey folks, yesterday i made a serious mistake trying to root my nokia, that resulted in my phone not being able to boot android.
I tried several guides trying to install trwp, but everytime i tried to flash using fastboot like this:
fastboot flash recovery twrp.img
Click to expand...
Click to collapse
It kept complaining that twrp file was to large. So i did some random searches and ended up using the following command from a random noob, which i never shouldn't have done because after it my phone hangs on splash screen
This is the command i did use:
fastboot flash system twrp.img
Click to expand...
Click to collapse
Using this command my phone seemed to flash, but it wont boot anymore.
Does anyone know how to repair my nokia and flash twrp without complaining that twrp.img file is to large? Is there a way to recover my phone from the mistake i have made? Any tips, hints or help is highly appreciated.
Greets,
Autonomus
Autonomus said:
Hey folks, yesterday i made a serious mistake trying to root my nokia, that resulted in my phone not being able to boot android.
I tried several guides trying to install trwp, but everytime i tried to flash using fastboot like this:
It kept complaining that twrp file was to large. So i did some random searches and ended up using the following command from a random noob, which i never shouldn't have done because after it my phone hangs on splash screen
This is the command i did use:
Using this command my phone seemed to flash, but it wont boot anymore.
Does anyone know how to repair my nokia and flash twrp without complaining that twrp.img file is to large? Is there a way to recover my phone from the mistake i have made? Any tips, hints or help is highly appreciated.
Greets,
Autonomus
Click to expand...
Click to collapse
Ouch! I think you flashed your system partition. Can you still enter fastboot mode? If so should be able recover. your phone using OST. Get instructions here:
https://forum.xda-developers.com/nokia-3/development/nokia-3-official-firmware-india-uae-t3674320
i've followed the instruction, ost launched as it should and it did recognise phone. That ost tried to reboot bootloader, and then it stopped working completly. It now only has a black screen and vibrates every now and then.
Also ost doesn't recognise the phone anymore ... :cry