Hello,
Since i flashed Viper Rom, i'm not able to get 3g Connection.
I only get EDGE or GPS.
I tried different Radios and changed all kind of thinks in my build.prop (which i guess is pretty messed up right now).
I'm using Vodafone Germany.
my current build.prop:
ro.ril.ecc.VODA-Africa-South=911,999,112
ro.ril.ecc.HTC-GCC=999,112,997
ro.ril.ecc.HTC-WWE=999
ro.ril.ecc.HTC-Dutch=112
ro.ril.ecc.HTC-SPA=112,911
ro.ril.ecc.HTC-FRA=112,911
ro.ril.ecc.HTC-ITA=112,911
ro.ril.ecc.HTC-EastEurope=112
ro.ril.enable.a52.HTC-ITA=1
ro.ril.enable.a53.HTC-ITA=1
ro.phone.min_match.HTC__Y13=7
ro.phone.min_match.HTC__J15=7
ro.phone.min_match.HTC__016=7
ro.ril.enable.a52=0
ro.ril.enable.a53=1
ro.ril.enable.dtm=0
ro.ril.hsdpa.category=14
ro.ril.hsupa.category=6
ro.ril.hsxpa=4
ro.ril.fast.dormancy.rule=1
ro.ril.radio.svn=1
ro.ril.disable.fd.plmn.prefix=23402,23410,23411,23420,27202
ro.ril.enable.managed.roaming=1
ro.ril.enable.sdr=1
ro.ril.enable.amr.wideband=1
ro.ril.enable.r8fd=0
ro.ril.disable.cpc=1
ro.com.google.clientidbase=android-htc-rev
ro.ril.vmail.23415=1571,BT,121,VDF UK
ro.ril.vmail.27203=171
ro.ril.vmail.65502=181
ro.ril.vmail.27211=171
ro.ril.vmail.65510=100
ro.ril.vmail.22299=4133,3ITA
ro.ril.vmail.23410=901,O2 UK,905,TESCO,443,giffgaff
ro.ril.vmail.22201=41901,I TIM
ro.ril.vmail.22210=42020,Vodafone IT
ro.ril.vmail.22288=4200,I WIND
ro.ril.vmail.20801=888
ro.ril.vmail.20810=123
ro.ril.vmail.20826=777
ro.product.model=HTC One S
ro.config.htc.enableCOTA=1
ro.watch.appid=com.sdgtl.watch.vieu_45_jb_s
ro.ril.enable.pre_r8fd=1
ro.ril.fd.pre_r8_tout.scr_off=2
ro.ril.fd.pre_r8_tout.scr_on=3
ro.ril.fd.r8_tout.scr_off=0
ro.ril.fd.r8_tout.scr_on=0
dev.defaultwallpaper=/system/customize/resource/viper.jpg
dev.deviceimage_large=/system/customize/resource/ville-htc_187x370.png
dev.deviceimage_small=/system/customize/resource/ville-htc_32x58.png
# begin build properties
# autogenerated by buildinfo.sh
htc.build.stage=2
ro.aa.customizationid=452550
ro.aa.project=Ville_U_JB_45_S
ro.prot=true
ro.aa.maincid=HTC__001
ro.aa.modelid=PJ4010000
ro.aa.cidlist=HTC__001,HTC__E11,HTC__203,HTC__Y13,HTC__102,HTC__405,HTC__304,HTC__A07
ro.aa.rid=386
ro.aa.taskid=301814
ro.aa.report=com
ro.aa.skulist=401
ro.aa.mainsku=401
ro.aa.romver=3.16.401.8
ro.onecid=
ro.cwkey=HTC__001
ro.com.google.clientidbase=android-htc
ro.build.id=JRO03C
ro.build.display.id=JRO03C
ro.build.version.incremental=128506.8
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.1
ro.build.date=五 12月 14 18:14:13 CST 2012
ro.build.date.utc=1355480053
ro.build.type=user
ro.build.user=
ro.build.host=abm016
ro.build.tags=release-keys
ro.product.model=VILLE
ro.product.brand=htc_europe
ro.product.name=ville
ro.product.device=ville
ro.product.board=
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=xhdpi
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=ville
ro.build.description=3.16.401.8 CL128506 release-keys
ro.build.description=3.16.401.8 CL128506 release-keys
ro.build.changelist=128506
ro.build.fingerprint=htc_europe/ville/ville:4.1.1/JRO03C/128506.8:user/release-keys
ro.build.characteristics=nosdcard
ro.build.project=Ville_U_JB_45_S:301814
ro.product.version=ViperOneS 2.2.0
ro.build.languageremove=0
ro.build.sense.version=4.5
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=3.16.401.8 CL128506 release-keys
ro.build.fingerprint=htc_europe/ville/ville:4.1.1/JRO03C/128506.8:user/release-keys
ro.build.characteristics=nosdcard
keyguard.no_require_sim=1
# end build properties
#
# system.prop for ville
#
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
persist.rild.ril.ltedr=0
persist.rild.ril.ltedrtable=max_retries=infinite,10000
ril.subscription.types=NV,RUIM
# System props for QCT radio architecture
ro.baseband.arch=msm
# for ganlite ril
rild.libpath.ganlite=/system/lib/librilswitch.so
rilswitch.vendorlibpath=/system/lib/libril-qc-qmi-1.so
rilswitch.ganlibpath=/system/lib/libganril.so
#
##system props for time-services
#
persist.timed.enable=true
#
# Enable dynamic CPU DCVS sample rate change mechanism.
#
dev.pm.dyn_samplingrate=1
# H/W information
ro.product.processor = Dual Core
ro.product.ram = 1GB
# Support HW reset
ro.product.hwreset = 1
# HW reset timer setting
ro.product.hwreset.timer1=8
ro.product.hwreset.timer2=11
# - system global -
dalvik.vm.heapsize=128m
dalvik.vm.heapgrowthlimit=64m
# System props for audio
# System props for soundhound
persist.htc.audio.pcm.samplerate=44100
persist.htc.audio.pcm.channels=2
#system props for global effect
htc.audio.global.state=0
htc.audio.global.profile=0
htc.audio.q6.topology=0
lpa.decode=true
tunnel.decode=true
# Display/HDMI
ro.hdmi.enable=true
# system prop for opengles version
#
# 131072 is decimal for 0x20000 to report version 2
ro.opengles.version=131072
#
# system prop for Bluetooth Dialup Networking
#
ro.qualcomm.bluetooth.dun=false
# system prop for Bluetooth FTP profile
ro.qualcomm.bluetooth.ftp=true
#
# system property for Bluetooth Handsfree Profile Wide Band Speech
#
ro.qualcomm.bluetooth.hfp.wbs=false
#
#system prop for Bluetooth hci transport
ro.qualcomm.bt.hci_transport=smd
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
# system property for Bluetooth Hardware information
ro.product.bluetooth=4.0
# - display / surfaceflinger -
ro.sf.lcd_density=240
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=dyn
debug.enabletr=true
ro.hwui.renderer.disable_opaque=true
debug.mdpcomp.maxlayer=3
# rotate area = 736 * 1280 * 2
debug.mdpcomp.limit=1884160
#debug.qctwa.preservebuf=1
# Camera H/W information
ro.product.main_camera = 8M
ro.product.front_camera = VGA
ro.product.display_resolution = 4.3 inch qHD resolution
# wifi
wifi.softap.interface=wlan0
wifi.softapconcurrent.interface=softap.0
ro.product.wifi = 802.11 b/g/n
init.svc.wpa_supplicant=
init.svc.dhcpcd_wlan0=
dhcp.wlan0.autoip=
dhcp.wlan0.dns1=
dhcp.wlan0.dns2=
dhcp.wlan0.dns3=
dhcp.wlan0.dns4=
dhcp.wlan0.gateway=
dhcp.wlan0.ipaddress=
dhcp.wlan0.leasetime=
dhcp.wlan0.mask=
dhcp.wlan0.ooxx=
dhcp.wlan0.pid=
dhcp.wlan0.reason=
dhcp.wlan0.result=
dhcp.wlan0.server=
net.wlan0.dns1=
net.wlan0.dns2=
wifi.wpa_supp_ready=
wlan.driver.status=
#For usb storage
ro.usb_host = 1
# For internal fat file system
ro.phone_fat = 1
# system property for RIL snapshot feature/timer
persist.radio.snapshot_timer = 0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.carrier=unknown
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
drm.service.enabled=true
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=4.1_r3
ro.vendor.extension_library=/system/lib/libqc-opt.so
htc.audio.swalt.enable=1
htc.audio.swalt.mingain=14512
htc.audio.alc.enable=1
ro.service.dpsvr.enabled=true
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
qemu.hw.mainkeys=1
# Disable sending data and logging
ro.kernel.checkjni=0
ro.kernel.android.checkjni=0
profiler.force_disable_ulog=1
profiler.force_disable_err_rpt=1
# Disable USB debugging icon on statusbar
persist.adb.notify=0
# Disable HTCs Screenshot feature
ro.htc.framework.screencapture=false
# Disable Bytecode Verification
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-flags=v=n,o=v,m=y
# Enable 3 fingers swipe
ro.framework.gestureservice=1
# Venom OTA
ro.config.venom.enableCOTA=1
ro.config.venom.nocheckin=0
ro.config.venom.noappupdate=0
settings.fota.saveto=cache
# Venom HUB
ro.venom.support_kernel_change=false
ro.venom.internal_sdcard=true
# Disable Bytecode Verification
dalvik.vm.verify-bytecode=false
dalvik.vm.dexopt-flags=v=n,o=v,m=y
#Seconds to prevent dialog from closing
venom.tweaks.donation_timeout=0
#Default Skin
persist.sys.skin=com.htc.skin.default
would be great if someone could post his working build.prop
Still no one an idea?
had flashed maximus before ,had no 3g connection there,too.
bibabeatmann said:
Still no one an idea?
had flashed maximus before ,had no 3g connection there,too.
Click to expand...
Click to collapse
Check out this thread:
http://forum.xda-developers.com/showthread.php?t=2160389&highlight=edge&page=19
This didn't work for me, but seems to have fixed the lack of 3g for some others.
Moto G - Asia Retail 4.4.2
:victory:
build.prop
--------------
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=KXB20.25-1.31
ro.build.display.id=KXB20.25-1.31
ro.build.version.incremental=14
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.date=Thu Jan 23 21:49:01 CST 2014
ro.build.date.utc=1390535341
ro.build.type=user
ro.build.user=hudsoncm
ro.build.host=ilclbld27
ro.build.tags=release-keys
ro.product.model=XT1033
ro.product.brand=motorola
ro.product.name=falcon_asia_ds
ro.product.device=falcon_umtsds
ro.product.board=MSM8226
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=motorola
ro.product.locale.language=en
ro.product.locale.region=AU
ro.wifi.channels=
ro.board.platform=msm8226
# ro.build.product is obsolete; use ro.product.device
ro.build.product=falcon_umtsds
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=falcon_asia_ds-user 4.4.2 KXB20.25-1.31 14 release-keys
ro.build.fingerprint=motorola/falcon_asia_ds/falcon_umtsds:4.4.2/KXB20.25-1.31/14:user/release-keys
ro.build.characteristics=nosdcard
# end build properties
#
# from device/moto/falcon_umtsds/system.prop
#
#
# system.prop for msm8226
#
# Use reference RIL for initial bringup
#rild.libpath=/system/lib/libreference-ril.so
rild.libpath=/vendor/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
persist.radio.msgtunnel.start=false
#
# system props for the cne module
#
persist.cne.feature=0
# Skip /sys/power/wait_for_fb_* nodes and
# force FB to be always on
debug.sf.fb_always_on=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.logs=0
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
ro.hdmi.enable=true
tunnel.decode=false
tunnel.audiovideo.decode=false
lpa.decode=true
lpa.use-stagefright=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
#9273 is decimal sum of supported codecs in AAL
#codecsPARSER_)AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=37491
# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOlogs 7:AllLogs
vidc.debug.level=1
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#system props for time-services
persist.timed.enable=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=0
# simulate sdcard on /data/media
#
persist.fuse_sdcard=true
ro.crypto.fuse_sdcard=true
#
#snapdragon value add features
#
# System props for audio
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
persist.audio.fluence.mode=endfire
persist.audio.handset.mic=digital
ro.config.vc_call_vol_steps=7
# FM maximum volume be between 0 and 8192 (0dB)
ro.audio.fm_max_volume=4096
# Enable/disable cabl
ro.qualcomm.cabl=0
# system prop for NFC DT
ro.nfc.port=I2C
#
# system property for Bluetooth hci transport
#
ro.qualcomm.bt.hci_transport=smd
#
# system property for Bluetooth HFP version
#
ro.bluetooth.hfp.ver=1.6
#
# system property for Bluetooth SAP support
# Motorola disabled SAP
#
ro.qualcomm.bluetooth.sap=false
# Bluetooth LE power class
qcom.bt.le_dev_pwr_class=1
##property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
# Motorola, ams087, 09/24/2013, IKJBMR2-6432 : disable tunnel audio encode
#tunnel.audio.encode = true
# Enable SSR
persist.sys.ssr.restart_level=3
persist.sys.qc.sub.rdump.on=1
# For TCMD debug level
persist.tcmd.log.limit=0
# Disable QCOM net early sockets feature
net.early.sockets=0
# Radio RIL properties
persist.radio.no_wait_for_card=1
persist.radio.call_type=1
persist.radio.apm_sim_not_pwdn=1
persist.radio.dfr_mode_set=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.build.version.full=Blur_Version.171.44.31.falcon_umtsds.AsiaRetail.en.03
ro.mot.build.customerid=RTASIA
ro.mot.build.version.sdk_int=19
ro.product.display=Moto G
ro.build.version.qcom=AU_LINUX_ANDROID_JB_3.2.3.04.03.00.166.006
persist.radio.plmn_name_cmp=1
ro.config.ringtone=Moto.ogg
ro.config.notification_sound=Moto.ogg
ro.config.alarm_alert=Oxygen.ogg
ro.MAX_HIDDEN_APPS=12
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
ro.usb.mtp=0x2e82
ro.usb.mtp_adb=0x2e76
ro.usb.ptp=0x2e83
ro.usb.ptp_adb=0x2e84
ro.usb.bpt=0x2e28
ro.usb.bpt_adb=0x2e29
ro.usb.bpteth=0x2e2a
ro.usb.bpteth_adb=0x2e2b
ro.bug2go.magickeys=24,26
persist.sys.qc.sub.rdump.max=0
ro.adb.secure=1
ro.sf.lcd_density=320
keyguard.no_require_sim=true
ro.zygote.capsuid=0
mdc_initial_max_retry=10
persist.radio.apn_delay=5000
drm.service.enabled=true
ro.com.google.clientidbase=android-motorola
ro.com.google.clientidbase.ms=android-motorola
ro.com.google.clientidbase.am=android-motorola
ro.com.google.clientidbase.gmm=android-motorola
ro.com.google.clientidbase.yt=android-motorola
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=4.4.2_r1
ro.carrier=unknown
ro.telephony.default_network=3
ro.com.android.dataroaming=false
persist.radio.multisim.config=dsds
telephony.lteOnCdmaDevice=0
persist.radio.dont_use_dsd=true
ro.media.enc.aud.fileformat=amr
ro.media.enc.aud.codec=amrnb
persist.sys.dalvik.vm.lib=libdvm.so
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
ro.qc.sdk.izat.service_mask=0x4
persist.gps.qc_nlp_in_use=0
ro.gps.agps_provider=1
default.prop
----------------
#
# ADDITIONAL_DEFAULT_PROPERTIES
#
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=0
how to update my phone with newest android 4.2.2 or 4.3 or 4.4.4 i I tried install recovery buth dont install crash my system the model of phone is escher star s4 with msm8225 amr v7 procesorr quad core 1 gb ram check my build prop
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JZO54K
ro.build.display.id=msm8625-userdebug 4.1.2 JZO54K eng.root.20130829.164046 test-keys
ro.build.version.incremental=eng.root.20130829.164046
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.2
ro.build.date=2013年 08月 29日 星期四 16:41:54 CST
ro.build.date.utc=1377765715
ro.build.type=userdebug
ro.build.user=root
ro.build.host=android-desktop
ro.build.tags=test-keys
ro.product.model=FDT W999
ro.product.brand=FDT W999
ro.product.name=FDT W999
ro.product.device=msm8625
ro.product.board=7x27
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=unknown
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm7627a
# ro.build.product is obsolete; use ro.product.device
ro.build.product=W802
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=msm8625-userdebug 4.1.2 JZO54K eng.root.20130829.164046 test-keys
ro.build.fingerprint=qcom/msm8625/msm8625:4.1.2/JZO54K/eng.root.20130829.164046:userdebug/test-keys
ro.build.characteristics=default
persist.sys.language=en
persist.sys.country=GB
persist.sys.localevar=
persist.sys.timezone=Asia/Shanghai
ro.build.version.subversion=V1.0.0
ro.adups.fota.device=FDT_W999
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libril-qc-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
keyguard.no_require_sim=1
debug.sf.hw=1
debug.composition.7x27A.type=dyn
debug.composition.7x25A.type=dyn
debug.composition.8x25.type=dyn
ro.sf.lcd_density=320
ro.sf.7x27A.lcd_density=320
ro.sf.8x25.lcd_density=320
dalvik.vm.heapsize=24m
persist.gralloc.cp.level3=1
#
# system props for the cne module
#
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
persist.cne.fmc.init.time.out=30
persist.cne.fmc.comm.time.out=130
persist.cne.fmc.retry=false
persist.cne.feature=0
#
# system props for the MM modules
#
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
# Headset hook delay in milli seconds
headset.hook.delay=500
#
# system prop for audio post processing
#
audio.legacy.postproc=true
#
# system prop for opengles version
#
ro.opengles.version=131072
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.ds_fmc_app.mode=0
#
# system props for IMS module
#
persist.ims.regmanager.mode=0
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth FTP profile
#
ro.qualcomm.bluetooth.ftp=true
#
# system prop for Bluetooth SAP profile
#
ro.qualcomm.bluetooth.sap=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
#
#system property for Bluetooth discoverability timeout in seconds
#0: Always discoverable
#debug.bt.discoverable_time=0
#
# System prop to disable strict mode flash on display
#
persist.sys.strictmode.visual=false
#
# System prop to enable/disable OMH. Enabled by default
#
persist.omh.enabled=1
#System prop to enable ehrpd capability
ro.config.ehrpd=true
# System property for cabl
ro.qualcomm.cabl=1
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=1
#
# System prop for sending transmit power request to RIL during WiFi hotspot on/off
#
ro.ril.transmitpower=true
#
#
#System prop to determine availability of
#analog fm path
#
ro.fm.analogpath.supported=true
#
#System property for FM transmitter
#
ro.fm.transmitter=false
#
#System property for single instance recording
#
ro.fm.mulinst.recording.support=false
#
#for using emmc partition instead sdcard
#
persist.sys.emmcsdcard.enabled=0
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=20
#
# system property to enforce Phone Mode view
#
ro.screen.layout=normal
#
#System prop for setting the pixel format
#
#ro.staticwallpaper.pixelformat=RGB_565
#
#System prop for disabling the meta data mode for encoder
#
debug.camcorder.disablemeta=0
#
# Simulate sdcard on /data/media
#
persist.fuse_sdcard=false
#
# System prop for using landscape preview layout in camera
#
debug.camera.landscape=true
#
# System prop for capping scroll velocity
#
ro.max.fling_velocity=4000
#
# System prop for enabling discontinuity for HLS Variant Playlist
#
httplive.enable.discontinuity=true
#
# Enable Dynamic sampling to help with cases like mp3 playback.
#
dev.pm.dyn_samplingrate=1
#
# On Strider below period is found to improve power numbers for AAC MP4
#
dev.pm.dyn_sample_period=700000
#
# System prop for enabling the cdrom feature
#
persist.service.cdrom.enable=1
#for enable poweroff charging feature
persist.pwroffcharging.enable=1
#enable read network preference from NV 10
persist.radio.mode_pref_nv10=1
#
# System prop for mapping to TTY Device for CSVT
#
hw.tty.vtdevice=/dev/smd11
# Add 20120823 TS-FMC-V2 start
#
# System prop for enabling the fmc feature
#
ro.config.cwenable=1
#
# System prop for enabling the fmc v2.0 feature
#
ro.config.fmcv2support=1
# Add 20120823 TS-FMC-V2 end
# set default mtu to 1380
persist.data_netmgrd_mtu=1380
#
# System prop for enabling forced sound in camera start/stop tones
#
ro.camera.sound.forced=1
#
# Snapdragon value add features
#
ro.qc.sdk.camera.facialproc=true
ro.qc.sdk.gestures.camera=false
#
# Enable swaprect feature
#
debug.sf.swaprect=1
#add by wjw to enable reset invalid sim card
persist.radio.reset_invalid_sim_card=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
dalvik.vm.heapstartsize=5m
dalvik.vm.heapsize=128m
keyguard.no_require_sim=true
ro.com.android.dataroaming=true
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=cloud.ogg
ro.config.notification_sound=pixiedust.ogg
ro.carrier=unknown
ro.config.alarm_alert=Alarm_Classic.ogg
ro.vendor.extension_library=/system/lib/libqc-opt.so
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.lockprof.threshold=500
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
persist.sys.fc.counter=0
persist.sys.anr.counter=0
# begin adupsfota properties
ro.adups.fota.oem=uniscope
ro.adups.fota.version=FDT W999_W802_V1.0.0_130829
# begin adupsfota properties
How I can overcome the mode "3e version of stock recovery"? Or, how to have a "CWM recovery"?
This is my recovery.img + boot.img , I've dumped :
recovery.img
boot.img
build.prop :
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JLS36C
ro.build.display.id=TBW596915_9365_V007027
ro.build.version.incremental=TBW596915_9365_V007027
ro.build.version.sdk=18
ro.build.version.codename=REL
ro.build.version.release=4.3
ro.build.date=2014年 06月 03日 星期二 13:19:35 CST
ro.build.date.utc=1401772775
ro.build.type=user
ro.build.user=ccadmin
ro.build.host=BUILD11
ro.build.tags=release-keys
ro.product.model=A450
ro.product.brand=qcom
ro.product.name=msm8610
ro.product.device=msm8610
ro.product.board=MSM8610
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=DBM
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8610
# ro.build.product is obsolete; use ro.product.device
ro.build.product=A450
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=msm8610-user 4.3 JLS36C TBW596915_9365_V007027 release-keys
ro.build.fingerprint=qcom/msm8610/msm8610:4.3/JLS36C/TBW596915_9365_V007027:user/release-keys
ro.build.characteristics=default
ro.qrd.rel.version=Pre-CS1120_1
persist.ty.productname=A450
persist.ty.productmodelname=A450
ro.hardware.version=P1.0
persist.ty.buttonlight.support=1
persist.ty.plugusb.support=1
ro.adb.secure=1
ro.ct.product.model=
# end build properties
#
# system.prop for msm8610
#
# Use reference RIL for initial bringup
#rild.libpath=/system/lib/libreference-ril.so
rild.libpath=/vendor/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
persist.radio.msgtunnel.start=false
persist.radio.atfwd.start=false
# Start in cdma mode
# ro.telephony.default_network=5
#
# system props for the cne module
#
persist.cne.feature=4
# system prop for override memlimit to enable cne
persist.cne.override.memlimit=1
# Skip /sys/power/wait_for_fb_* nodes and
# force FB to be always on
debug.sf.fb_always_on=1
debug.composition.type=dyn
debug.gralloc.map_fb_memory=0
debug.hwc.dynThreshold=1.5
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
ro.hdmi.enable=true
tunnel.decode=false
#8x10 does not support tunnel av playback
#this prop should be set to false all the time
tunnel.audiovideo.decode=false
lpa.decode=false
lpa.use-stagefright=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
media.aac_51_output_enabled=true
mm.enable.qcom_parser=131071
# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOlogs 7:AllLogs
vidc.debug.level=1
#
# system props for widevine
#
persist.gralloc.cp.level3=1
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#system props for time-services
persist.timed.enable=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=0
# simulate sdcard on /data/media
#
persist.fuse_sdcard=false
#
# System prop for enabling the cdrom feature
#
persist.service.cdrom.enable=1
#
# System prop for default USB configuration
#
persist.sys.usb.config=diag,serial_smd,serial_tty,rmnet_bam,mass_storage,adb
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
# Reduce Background apps limit
ro.sys.fw.bg_apps_limit=20
# System property for cabl
ro.qualcomm.cabl=0
# Enable Fast Dormancy 103
persist.env.fastdorm.enabled=true
#system props for restore modem_pref support
persist.radio.restore_mode_pref=1
#
# dirty ratio value when enable UMS
#
ro.sys.umsdirtyratio=20
# Enable RST packet drop
persist.data.tcp_rst_drop=true
# system prop for NFC DT
ro.nfc.port=I2C
#
#DASH video streaming
#Specify max allowed resolution/bandwidth for representations
#Set allowed avsync window during playback
#
persist.dash.max.rep.resolution=1280*720
persist.dash.max.rep.bandwidth=4000000
persist.dash.avsync.window.msec=100
tunnel.audio.encode = false
#PPPOE config enable
#
ro.config.pppoe_enable=1
# system prop for storage test
ro.external.sd.path=/storage/sdcard1
#
#System property for FM transmitter
#
ro.fm.transmitter=false
#Audio Resourcemanager exceptions
#by enabling following flag to true we support pcm camcorder recording
rm.audio.exceptions = false
#
# ADDITIONAL_BUILD_PROPERTIES
#
tunnel.decode=false
lpa.decode=true
persist.sys.timezone=Africa/Casablanca
keyguard.no_require_sim=true
ro.com.android.dataroaming=true
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.carrier=unknown
ro.config.alarm_alert=Alarm_Classic.ogg
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=4.3_r1
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.ty.ktcit.product=ktcit_mmi
debug.ktcit.fw.projectname=ktcit_mmi
ro.qc.sdk.izat.premium_enabled=1
ro.qc.sdk.izat.service_mask=0x5
persist.gps.qc_nlp_in_use=0
ro.gps.agps_provider=1
# begin fota properties
ro.fota.platform=MSM8x10
ro.fota.type=phone
ro.fota.oem=ktouch8x10
ro.fota.device=A450
ro.fota.version=TBW596915_9365_V007027
# end fota properties
So I need some help why can't I use my data only Wi-Fi what am I doing wrong? Please help
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=KOT49H
ro.build.display.id=KOT49H.S902LUDU3AOG2
ro.build.version.incremental=S902LUDU3AOG2
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.date=Mon Jul 13 17:12:24 KST 2015
ro.build.date.utc=1436775144
ro.build.type=user
ro.build.user=dpi
ro.build.host=SWDD6010
ro.build.tags=release-keys
ro.product.model=SM-S902L
ro.product.brand=samsung
ro.product.name=kltetfnvzw
ro.product.device=kltetfnvzw
ro.product.board=MSM8974
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8974
# ro.build.product is obsolete; use ro.product.device
ro.build.product=kltetfnvzw
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=kltetfnvzw-user 4.4.2 KOT49H S902LUDU3AOG2 release-keys
ro.build.fingerprint=samsung/kltetfnvzw/kltetfnvzw:4.4.2/KOT49H/S902LUDU3AOG2:user/release-keys
ro.build.characteristics=verizon
# Samsung Specific Properties
ro.build.PDA=S902LUDU3AOG2
ro.build.hidden_ver=S902LUDU3AOG2
ro.build.changelist=4647767
ro.product_ship=true
ro.chipname=MSM8974PRO
ro.config.rm_preload_enabled=0
ro.build.knox.container=
persist.sys.storage_preload=1
# end build properties
#
# from device/samsung/kltetfnvzw/system.prop
#
#
# system.prop for msm8974
#
ro.sf.lcd_density=480
# Evolution RIL (8xxx)
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
# Enable time services daemon
persist.timed.enable=true
# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1
# Don't wait the card state for RADIO POWER request
persist.radio.no_wait_for_card=1
# For sys info indication
persist.radio.add_power_save=1
# Snapshot setting
persist.radio.snapshot_enabled=1
persist.radio.snapshot_timer=22
# Control EONS (true = EONS enabled, false = EONS disabled)
persist.eons.enabled=false
# Use CP SE13 Table
persist.radio.use_se_table_only=1
# Default ECCList
ro.ril.ecclist=911,#911,*911
# Use CDMALTE Phone (For 4G model)
telephony.lteOnCdmaDevice=1
# Support Global Mode (For global mode model)
ro.config.multimode_cdma=1
# Restore delay of the default network - 30 mins (VZW)
android.telephony.apn-restore=1800000
# Restore delay of VZW Apps APN - 1 min (VZW)
vzw.telephony.appsapn-restore=60000
# Data modules (For evolution RIL model)
ro.use_data_netmgrd=false
persist.data.netmgrd.qos.enable=false
ro.data.large_tcp_window_size=true
# Use data service state for signal display (Except USC CS model)
ro.config.combined_signal=true
# Restore delay of the default network - 30 mins (VZW)
android.telephony.apn-restore=1800000
# Restore delay of VZW Apps APN - 1 min (VZW)
vzw.telephony.appsapn-restore=60000
# Retry Timer (VZW)
ro.gsm.data_retry_config=max_retries=infinite,5000,5000,60000,120000,480000,900000
# Default Network Mode (For 4G model)
ro.telephony.default_network=8
# Disable Group play Tethering (Tracfone)
net.tether.blocked=true
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
debug.disable.bwc=1
debug.mdpcomp.logs=0
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
ro.hdmi.enable=true
tunnel.decode=true
tunnel.audiovideo.decode=true
lpa.decode=false
lpa.use-stagefright=true
persist.speaker.prot.enable=false
qcom.hw.aac.encoder=true
#
# system props for the cne module
#
persist.cne.feature=0
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=true
media.stagefright.enable-record=false
#37491 is decimal sum of supported codecs in AAL
#codecs: AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=37491
# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOLOGS 7:AllLOGS
vidc.debug.level=1
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
# System property for cabl
ro.qualcomm.cabl=1
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
ro.qc.sdk.sensors.gestures=true
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.camera.facialproc=false
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
tunnel.audio.encode = true
#use VERY_HIGH_QUALITY for audio resampler
af.resampler.quality=4
#
# system props for call volume steps
#
ro.config.vc_call_vol_steps=7
# system property for vmware hypervisor running
vmware.hypervisor.running=0
#SLook
ro.slook.ver=1
#Aggr_CameraKill
persist.sys.kill_support=1
#OTASP Schema
ro.cdma.otaspnumschema=SELC,3,00,07,80,87,88,99
# Default Cdma System property values
ro.cdma.home.operator.numeric=310000
ro.cdma.home.operator.alpha=TracFone
#
# ADDITIONAL_BUILD_PROPERTIES
#
persist.sys.logkit.ctrlcode=0
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
ro.security.icd.flagmode=single
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
persist.radio.apm_sim_not_pwdn=1
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.build.scafe=capuccino
ro.build.scafe.size=short
ro.build.scafe.shot=single
ro.sec.fle.encryption=true
ro.hdcp2.rx=tz
media.enable-commonsource=true
ro.secwvk=144
ro.securestorage.support=true
security.mdpp=None
ro.security.mdpp.ver=1.0
ro.security.mdpp.release=3
ro.security.vpnpp.ver=1.4
ro.security.vpnpp.release=2
security.mdpp.result=None
ro.security.mdpp.ux=Enabled
ro.hwui.texture_cache_size=48
ro.hwui.layer_cache_size=32
ro.hwui.path_cache_size=16
ro.hwui.shape_cache_size=2
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=4
ro.hwui.texture_cache_flush_rate=0.5
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=512
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
ro.error.receiver.default=com.samsung.receiver.error
ro.config.alarm_alert=Morning_flower.ogg
ro.config.ringtone=Over_the_horizon.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.setupwizard.mode=OPTIONAL
ro.com.google.clientidbase.ms=android-americamovil-us
ro.com.google.clientidbase.am=android-americamovil-us
ro.com.google.clientidbase.yt=android-samsung
ro.com.google.clientidbase.gmm=android-samsung
ro.com.google.gmsversion=4.4_r7
persist.sys.dalvik.vm.lib=libdvm.so
ro.build.selinux=1
ro.kernel.qemu=0
ro.config.tima=1
ro.config.timaversion=3.0
ro.config.knox=v30
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
ro.qc.sdk.izat.service_mask=0x0
persist.gps.qc_nlp_in_use=1
ro.gps.agps_provider=1
net.dns1=8.8.8.8
net.dns2=8.8.4.4