Synergy Rom Question - Verizon Samsung Galaxy S III

In the Verizon Android Development forums in the Downloads list thread it says that Synergy is a ICS rom but the Synergy thread said it was Jellybean based. Can anyone clarify which it is so i can install the proper kernels and such.

Depends on which release, there are both ICS and JB. The older being ICS and newer being JB. I'm on Release 118 which is JB.
Sent from my SCH-I535 using Tapatalk 2

b61994 said:
In the Verizon Android Development forums in the Downloads list thread it says that Synergy is a ICS rom but the Synergy thread said it was Jellybean based. Can anyone clarify which it is so i can install the proper kernels and such.
Click to expand...
Click to collapse
R77 was the last release of ICS, all the later releases, ie R118, are JB.

Related

MIUI ICS

Is it possible to get MIUI ICS ported to this phone? I love MIUI but it would be wonderful to have the 4.0.3/4.0.4 version on this phone. I would have posted this in Q & A but I figured we could have a discussion on this thread. Don't flame me. Its very annoying.
On rootzwiki whitehawkx posted a guide on how to port it over to our phone.
I believe it should also work for ICS.
Afaik there is no Miui ICS port possible at this time. There's only 8 models supported I think and not for the P999 or P990.
Again this is afaik.
Sent from my LG-P999 using XDA
I know, I wasn't sure if the instructions are the same for the ics version. Since ics is a completely different firmware. /:
Galnet miui had a version you flashed over a 2.x.x install, making nggn it miui v4. Never did it myself, but that's an option. Baji's port thread has it listed.
Tapatalked from my A100 - Flex Reaper RF1.
Where?? I don't see it? Is it in the replies?
zachpozniak said:
Where?? I don't see it? Is it in the replies?
Click to expand...
Click to collapse
If you meant me, near the bottom of the OP on rootzwiki.
Sent from my LG-P999 using Tapatalk 2
galnet ics miui is one of the smoothest roms i've used on the g2x.
It has been ported to our phone,bot nobody can get data working!
The Galnet Miui ICS port is very outdated now (2.11.26). Even then Galnet just claimed to have some ICS framework hacks. Don't think they have a V4.
Sent from my LG-P999 using XDA
Here it is http://forum.xda-developers.com/showthread.php?t=1501821
Also check this out http://forums.miui.us/forumdisplay.php?131-MIUI-v4-Porting

ICS OTG Kernel?

Ive currently been running NexusMod ICS Zero Build 2 Rev.12 (Beta 12) for a few weeks now and im wondering if anyone knows of a ICS kernel that would allow OTG functionality? Most of the kernels in the dishevelment section are for GB, I know Romracer has one for his ICS build but im not sure how to extract the kernel from the zip.
Please any info would be great
Coming from the Captivate section where everything is just laid out has spoiled me I guess...
I think romracers ics kernel is in the same thread as his GB kernel, iirc.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Alright thanks I'll check it out
Sent from my SAMSUNG-SGH-I727 using XDA
Dre363 said:
Ive currently been running NexusMod ICS Zero Build 2 Rev.12 (Beta 12) for a few weeks now and im wondering if anyone knows of a ICS kernel that would allow OTG functionality? Most of the kernels in the dishevelment section are for GB, I know Romracer has one for his ICS build but im not sure how to extract the kernel from the zip.
Please any info would be great
Click to expand...
Click to collapse
until source is released for Skyrocket ICS, no. Nothing can be added really until then. That's why you haven't been seeing the threads, not really any to make. Mohan has been starting work on a custom kernel from the international version source, but it's very alpha at this point. Soon as we get official ICS, Sammy should follow soon with our source, then progress on stuff like this, BLN, OC/UV, etc will really start cranking out quickly.
Thank both of you for the replies. I think I found a work around by installing toggle15. OTG is finally working for me..either that or it was a crappy cable
Sent from my SAMSUNG-SGH-I727 using XDA

[Request] AOSP ICS/JB For SGSP

Hello everyone, I've got Galaxy S Plus 5 months ago, and I found out that there will be no official ICS or JB update for it, so I am asking is there AOSP version of ICS for this device, not CM or AOKP. If there is I would be thankful if someone could post it here, thanks
You're on the wrong section. But nvm I'll answer. Broodplank was trying to build aosp ics but no success. For now we have no aosp ics or jb. Broodplank announced the aosp ics on one of the comments in the cm7 2.1 thread
Juhan Jufri said:
You're on the wrong section. But nvm I'll answer. Broodplank was trying to build aosp ics but no success. For now we have no aosp ics or jb. Broodplank announced the aosp ics on one of the comments in the cm7 2.1 thread
Click to expand...
Click to collapse
Ok, thanks for info
Another thread? http://forum.xda-developers.com/showthread.php?t=1905308
Use general section, please
Inviato dal mio GT-I9001 con Tapatalk 2
We have CM9 and Partially working CM10.
i think thats enough for now. Or can you develop?
A working aosp gb is possible. But afaik a working aosp ics is only possible by porting. But unfortunately i havnt succeeded in that. Same thing for compiling from source.
I need stock, not CM. And AOSP kinda is a stock samsung system
TodorSRB said:
I need stock, not CM. And AOSP kinda is a stock samsung system
Click to expand...
Click to collapse
It's not a stock Samsung, it's stock Google/Android. FWIW, it'd be nice to see AOSP, but CM is in general more customizable and advanced.
Sent from my GT-I9001
Well if I intend to sell the phone I wanna sell it with ICS stock look and I want to have ICS because it is a lot faster, GB on my Xperia Mini was slow, after update to ICS it worked much faster, I hope same would be with SGSP, but I can't even update Galaxy to official 2.3.6. I don't know why...I didn't even found official Samsung forum
I just remembered that the first alpha build of jelly bean from vpumpkin was an aosp jb but its not stable and can't make calls. Doomsday released his latest build but was not an aosp. Well if you are pro at making roms then try to take vpumpkin's aosp jb and add in doomsday's fixes to cm10. I don't know but I think its hard to just take cm9 and remove the theme manager

OTA Roms?

Are there currently any ROMs for the OTA version of ICS (4.0.4)? I've noticed that most of the ROMs say for the ICS leak only.
Thanks,
Adam
_amass said:
Are there currently any ROMs for the OTA version of ICS (4.0.4)? I've noticed that most of the ROMs say for the ICS leak only.
Thanks,
Adam
Click to expand...
Click to collapse
Please post random questions in the Q&A section. This section is for original development (or as close as we can come to it) only.
And, though it may not be stated specifically, all of the ROM's work on leak or official ICS.
_amass said:
Are there currently any ROMs for the OTA version of ICS (4.0.4)? I've noticed that most of the ROMs say for the ICS leak only.
Thanks,
Adam
Click to expand...
Click to collapse
What are you running right now? gingerbread?
Sorry about that I just figured since it related to development this was the appropriate section! Sorry again! Currently I'm running the OTA Version of ICS.
_amass said:
Sorry about that I just figured since it related to development this was the appropriate section! Sorry again! Currently I'm running the OTA Version of ICS.
Click to expand...
Click to collapse
So are you looking for like a recovery stock rom to fall back on?
No, i was seeing if there were any cool custom ROMs for ICS. Like, ICS based ROMs with more customization, deodexed, 1% battery mod, etc.
_amass said:
No, i was seeing if there were any cool custom ROMs for ICS. Like, ICS based ROMs with more customization, deodexed, 1% battery mod, etc.
Click to expand...
Click to collapse
Did you try NUMA? It is a amazing ROM
http://forum.xda-developers.com/showthread.php?t=1960679
Nope! Downloading right now! Thanks!

[Q] Help finding a kernel for my phone(d2vzw) and rom(CW 10.1/4.2.2)

As the title says. I'm looking for a kernel that allows overclocking. I've been looking for a long time but I can't find any. SiyahKernel appears to only work with the i9300 and 4.1. Unless I'm wrong. Thanks.
Also, is CM 10.0 android 4.1? Because im cool with switching to that if it will work with Siyah.
uromastix87 said:
As the title says. I'm looking for a kernel that allows overclocking. I've been looking for a long time but I can't find any. SiyahKernel appears to only work with the i9300 and 4.1. Unless I'm wrong. Thanks.
Also, is CM 10.0 android 4.1? Because im cool with switching to that if it will work with Siyah.
Click to expand...
Click to collapse
Anything you intend to flash is in the Verizon Galaxy SIII Dev or Original Dev section. Do not flash anything labeled for any other GSIII model, you'll brick your phone. I'm certain each custom kernel allows for OCing, you can find most in the Verizon Original Dev section.
CM10 is 4.1. You need to flash CM10.1 which is 4.2.2 because 4.2.2 is under active development. Something to note, flash kernels released either AFTER the date of your rom/nightly OR within a week or two week span. Often enough, there are updates in the rom source that render kernels prior to the rom's release incompatible. You'll know it's incompatible cuz after flashing your screen will be completely black when booting into the rom.
Sent from my SCH-I535 using Tapatalk 4 Beta
SlimSnoopOS said:
Anything you intend to flash is in the Verizon Galaxy SIII Dev or Original Dev section. Do not flash anything labeled for any other GSIII model, you'll brick your phone. I'm certain each custom kernel allows for OCing, you can find most in the Verizon Original Dev section.
CM10 is 4.1. You need to flash CM10.1 which is 4.2.2 because 4.2.2 is under active development. Something to note, flash kernels released either AFTER the date of your rom/nightly OR within a week or two week span. Often enough, there are updates in the rom source that render kernels prior to the rom's release incompatible. You'll know it's incompatible cuz after flashing your screen will be completely black when booting into the rom.
Sent from my SCH-I535 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Thanks for the reply.
So, even if the rom was intended for an i9300 it will work on my 535? Are there any kernels for 4.2.2 that allow OCing?
Will this work with my setup? http://forum.xda-developers.com/showthread.php?t=2226894

Categories

Resources