Database Info

[Q] Xoom stuck on starting RSD mode 2?

Flashed Build HWI69 for US Retail on a Canadian wifi MZ604 xoom..tired of
waiting for 3.1 update.
adb reboot bootloader
fastboot oem unlock
adb reboot bootloader
Xoom will then reboot into bootloader screen
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot oem lock
fastboot reboot
It is stuck on Starting RSD mode 2.
I can not get it to fastboot protocol...device does not turn off.
Any solutions?

Fastboot OEM lock is where you went wrong. Anyway see this thread.

OK I did this procedure yesterday but did not relock (I know it says to on the moto site but the guide I read said not to).
Anyway, pressing power and vol up will force a reboot. Unsure what will happen when it boots back up though...!

You should be fine. Only trying to relock will cause this error.

To get back to fastboot after a bad lock do this.
Power button and volume up, this will reboot the device.
As soon as the screen turns back on holds down power and volume down. In about 60 seconds your device should go to fastboot. Do not let go until it gets there.
Sent From My Evo

Thanks for the reply . It now says Failed to boot LNX 0X0004
Starting Fastboot protocol support
However it will not connect to xoom.
<wait for device> when issue fastboot command.
What the hell is going on?

you need to read this thread
http://forum.xda-developers.com/showthread.php?t=1108518

The exact thread I linked to...(-__-)'

I followed instruction from motorla dev support site.
"h**p://developer.motorola.com/products/software/?pubid=987654"
It uses command "fastboot oem lock"! So why did locking brick the device?
here it is:
Device Software Images
Select the appropriate device software image to download and re-lock your device. If you need to find your build number on your Motorola device go to Settings and About Phone or About Tablet.
The commands to flash and re-lock your device are as follows:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot oem lock
Note: If no userdata.img file is present in your download, please issue the command:
fastboot erase userdata

The Moto instructions are for locking the device back to it's own image. You are not using your device's own image. Every guide I've seen on here tells you not to relock, regardless of what Moto say. Believe the devs.

Thanxs
I now believe the devs......
Thanks for the reply. Sent the beast out to moto Canada today.

tfx1 said:
I now believe the devs......
Thanks for the reply. Sent the beast out to moto Canada today.
Click to expand...
Click to collapse
Try making or obtaining a factory cable which its different from an OTG cable. Start with the two links below. This might save the day.
http://forum.xda-developers.com/showthread.php?t=1077414
http://forum.xda-developers.com/showthread.php?t=1108518

[Q] Galaxy Nexus freezes after Google logo

I have successfully rooted my Verizon Nexus version 4.04 build IMM76K and tried to flash two different ROM’s one is "Vicious-TORO-JellyBean-V3-signed" and the other is "Team Liquid Vicious-Toro V3-JellyBean Fully 100% Functional Deodex". On both it seemed to install fine, no error messages. Then at reboot it booted past the Google logo to the ROM logo and never passed it. I waited for a minimum of 20 minutes until I pulled the Battery and flashed back to stock. Please help.

Did flashing back to stock solve the problem, is your device ok?
Before you flash a custom ROM, always try wiping the cache and wiping the dalvich cache. You then wipe data and do a factory reset. After that you THEN install the ROM, that might've caused the problem. Maybe, I am not sure.
Which clockworkmod did you use to try flashing the ROMs, please give us more detail!

I actually did exactly as you said. Wiped, factory reset, wipe cache and then dalvich. Pushed the ROM to the phone and then installed it.I have been useing Gnex Toolkit v1.7

And did it work or what?
Wiping user data/Factory reset is important after installing the Custom ROM.
There is a good way to fix all this, make sure you backup EVERYTHING, and when I say EVERYTHING I mean EVERYTHING (Photos, Videos, EVERYTHING).
USE FASTBOOT, I have mentioned this heaps of times, I have because it just WORKS. I bricked my device before, and I just used fastboot. Understand 2 things if you're going to use it...
1. It DELETES EVERYTHING
2. You need to have your STOCK ROM in fastboot format
If you're willing to use fastboot and have the proper stock files here's how to do it (From Nexus S post: http://forum.xda-developers.com/showthread.php?t=1445635):
I QUOTE: "Put all six fastboot images in one folder, unlock your bootloader, perform the fastboot flashes, then lock the bootloader:
fastboot oem unlock
fastboot flash bootloader bootloader.img
fastboot reboot-bootloader
fastboot flash radio radio.img
fastboot reboot-bootloader
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot oem lock
"
Cheers
Oh by the way I am not sure if the oem lock and unlock bit applies to you, check a relative guide to Galaxy Nexus please , this was an example

Bircked Help?

I have anexus 5 that is stuch on the google logo or is stuck in a boot lopp than it gets frozen and when plugegd in the battery logo turns on. I can go into recovery (twrp), but everything on my phone ghas been erased so theres nothing to flash. I tried to use a Nexus 5 toolkit to stock flash but it always comes up with an error. When i try something on twrp it says unable to mount....and give like 5-6 different thinbgs that it cant mount to. Everytime i try to flaash a new bootloader or something from that toolkit the phone turns off and goes into the battery logo. When i use twrp and try to do anything the phone just restarts into recovery. Is there any way i could push factory images to the phone or something else.
BTW, i dont know mucgh in terms of doing stuff with adb and terminal and all that so please be simplistic with the answers. Thanks in advance,.

http://forum.xda-developers.com/showthread.php?t=2513701
[TUTORIAL] How to flash a factory image | Return to stock | Unroot/SAVE your Nexus 5
Sent from my Nexus 5

CRIME INC. said:
http://forum.xda-developers.com/showthread.php?t=2513701
[TUTORIAL] How to flash a factory image | Return to stock | Unroot/SAVE your Nexus 5
Sent from my Nexus 5
Click to expand...
Click to collapse
So i did this and it failes when at the bootloader and alos at the end it says failure. What to do now?

Irfdiddy said:
So i did this and it failes when at the bootloader and alos at the end it says failure. What to do now?
Click to expand...
Click to collapse
Go to twrp and factory reset it and see if it works..
Write failure means that the eMMC might have died which can only be solved by replacing the mobo.
- Sent from an IceCold Hammerhead!

Irfdiddy said:
So i did this and it failes when at the bootloader and alos at the end it says failure. What to do now?
Click to expand...
Click to collapse
You're being too vague for us to help you. What commands did you enter at the terminal? Word for word what was the error message(s) you received? Did you try flashing the factory image using both the primary and backup bootloader?

BirchBarlow said:
You're being too vague for us to help you. What commands did you enter at the terminal? Word for word what was the error message(s) you received? Did you try flashing the factory image using both the primary and backup bootloader?
Click to expand...
Click to collapse
So i followed the guide in the link posted above. This:
fastboot flash bootloader C:/image-hammerhead-krt16m/bootloader.img
fastboot reboot-bootloader
fastboot flash radio C:/image-hammerhead-krt16m/radio.img
fastboot reboot-bootloader
fastboot flash system C:/image-hammerhead-krt16m/system.img
fastboot flash userdata C:/image-hammerhead-krt16m/userdata.img
(Note: this command will wipe your device (including /sdcard), EVEN if your bootloader is already unlocked.)
fastboot flash boot C:/image-hammerhead-krt16m/boot.img
fastboot flash recovery C:/image-hammerhead-krt16m/recovery.img
fastboot erase cache
Now, i can flash the boot.img, the system.img, the radio, but it hangs up on some of the other ones and it says "erasing..." than i have to stop it casue it doesnt work. Also, when i go into recovery it shows a spinning android logo.
Edit: Ive gotten all the way to "fastboot flash system system.img", but it gets stuck on my phone and says "erasing..."

Irfdiddy said:
So i followed the guide in the link posted above. This:
fastboot flash bootloader C:/image-hammerhead-krt16m/bootloader.img
fastboot reboot-bootloader
fastboot flash radio C:/image-hammerhead-krt16m/radio.img
fastboot reboot-bootloader
fastboot flash system C:/image-hammerhead-krt16m/system.img
fastboot flash userdata C:/image-hammerhead-krt16m/userdata.img
(Note: this command will wipe your device (including /sdcard), EVEN if your bootloader is already unlocked.)
fastboot flash boot C:/image-hammerhead-krt16m/boot.img
fastboot flash recovery C:/image-hammerhead-krt16m/recovery.img
fastboot erase cache
Now, i can flash the boot.img, the system.img, the radio, but it hangs up on some of the other ones and it says "erasing..." than i have to stop it casue it doesnt work. Also, when i go into recovery it shows a spinning android logo.
Edit: Ive gotten all the way to "fastboot flash system system.img", but it gets stuck on my phone and says "erasing..."
Click to expand...
Click to collapse
It will take some minutes to cOmplete the process computer will also hang type of feeling or stop responding for couple of minutes let the program finish its task,...

Irfdiddy said:
So i followed the guide in the link posted above. This:
fastboot flash bootloader C:/image-hammerhead-krt16m/bootloader.img
fastboot reboot-bootloader
fastboot flash radio C:/image-hammerhead-krt16m/radio.img
fastboot reboot-bootloader
fastboot flash system C:/image-hammerhead-krt16m/system.img
fastboot flash userdata C:/image-hammerhead-krt16m/userdata.img
(Note: this command will wipe your device (including /sdcard), EVEN if your bootloader is already unlocked.)
fastboot flash boot C:/image-hammerhead-krt16m/boot.img
fastboot flash recovery C:/image-hammerhead-krt16m/recovery.img
fastboot erase cache
Now, i can flash the boot.img, the system.img, the radio, but it hangs up on some of the other ones and it says "erasing..." than i have to stop it casue it doesnt work. Also, when i go into recovery it shows a spinning android logo.
Edit: Ive gotten all the way to "fastboot flash system system.img", but it gets stuck on my phone and says "erasing..."
Click to expand...
Click to collapse
You're not letting it finish. That's why you're having problems. It can take a long time. It also wouldn't hurt to use the flash-all.bat script instead of flashing each individually.

Bricked my phone very hard. Is it still savable?

Long story short I bricked my phone when trying to flash recovery using toolkit. Now my phone won't turn on and recovery is gone as well. Somehow my PC can recognize the phone in fastboot mode although there's nothing showing on the screen.
So I tried the method in this thread:
http://forum.xda-developers.com/oneplus-one/help/wrong-kernel-black-screen-fastboot-adb-t2835696
It shows I flashed everything and it shows green color in the tool but when I checked the partitions, boot.img, recovery.img, userdata.img, system.img, etc are still broken. At that time the bootloader was still unlocked.
Since my computer can still see the phone in fastboot so I tried to flash the original image in fastboot. Again everything went through with no error but the phone still wouldn't turn on and the partitions are still same broken/corrupted. However the bootloader became locked after this. So now I end up with no more solutions. Since bootloader says locked(although boot.img is actually corrupted) I can't flash or do anything in fastboot command.
So I guess I'm really SOL right now... My only hope right now is maybe there will be USB JTAG or Nand flasher but I don't know if anyone can repair that right now.
Any suggestions?

fastboot oem unlock
fastboot erase system
fastboot erase boot
fastboot erase userdata
fastboot erase recovery
Now use twrp or cwm or whatever
fastboot boot recovery nameofrecovery.img
If your phone boots to recovery you may consider running e2fsck against data and cache partitions through adb shell
Best of luck

Restore Android Stock's Recovery Mode

Hello! I've tried to root my phone (Moto G XT1541 Europe 1GB) but failed. I got an error when trying to flash the custom recovery. Unfortunately, it has overwritten the stock recovery and it didn't install. So, now I have a phone without recovery and I can't do a factory reset because of that (I think).
So, this is my question: how can I re install the default Android 6.0 recovery mode for my phone?
Also, my phone boots automatically on bootloader mode and I can't re-lock the bootloader because I can't flash anymore either; I got an error because the pre flash validation failed when trying to flash with adb fastboot, but this is minimal issues that doesn't really bother me, but they could be helpful and if someone knows how to get rid of them, I want to know!
I hope someone will help me!

Azyreal said:
Hello! I've tried to root my phone (Moto G XT1541 Europe 1GB) but failed. I got an error when trying to flash the custom recovery. Unfortunately, it has overwritten the stock recovery and it didn't install. So, now I have a phone without recovery and I can't do a factory reset because of that (I think).
So, this is my question: how can I re install the default Android 6.0 recovery mode for my phone?
Also, my phone boots automatically on bootloader mode and I can't re-lock the bootloader because I can't flash anymore either; I got an error because the pre flash validation failed when trying to flash with adb fastboot, but this is minimal issues that doesn't really bother me, but they could be helpful and if someone knows how to get rid of them, I want to know!
I hope someone will help me!
Click to expand...
Click to collapse
The bootloader cannot be relocked in the Moto G 2015, the best you can do is hide the warning screen. Find the stock image and fastboot flash the recovery from there, or better yet, flash the entire image so you are in a known working state
If you are in Pre-Flash validation, you do not have the correct image for your device... I suggest you post in the "How to flash factory images" thread about returning to stock, if it is possible. You MUST factory default before flashing factory images, if you can't, try 'fastboot erase userdata' and try again.

Flash latest twrp via fastboot and reboot into recovery ,
don't reboot into system,
reboot into recovery manually, then you can enter twrp recovery and can flash supersu 2.62.3.
when you just reboot after flash twrp and reboot system erase custom recovery and save stock recovery, so don't enter fastboot reboot, enter fastboot reboot recovery after flash recovery via pc.
Rename twrp recovery as only twrp in fastboot folder in your pc , not as twrp.img,
But cmd as fastboot flash recovery twrp.img , then no errors ( are you unlocked bootloader ?)

acejavelin said:
The bootloader cannot be relocked in the Moto G 2015, the best you can do is hide the warning screen. Find the stock image and fastboot flash the recovery from there, or better yet, flash the entire image so you are in a known working state
If you are in Pre-Flash validation, you do not have the correct image for your device... I suggest you post in the "How to flash factory images" thread about returning to stock, if it is possible. You MUST factory default before flashing factory images, if you can't, try 'fastboot erase userdata' and try again.
Click to expand...
Click to collapse
drmuruga said:
Flash latest twrp via fastboot and reboot into recovery ,
don't reboot into system,
reboot into recovery manually, then you can enter twrp recovery and can flash supersu 2.62.3.
when you just reboot after flash twrp and reboot system erase custom recovery and save stock recovery, so don't enter fastboot reboot, enter fastboot reboot recovery after flash recovery via pc.
Rename twrp recovery as only twrp in fastboot folder in your pc , not as twrp.img,
But cmd as fastboot flash recovery twrp.img , then no errors ( are you unlocked bootloader ?)
Click to expand...
Click to collapse
Hey! Thank you! I've been able to flash the TWRP recovery and now I can do a factory reset (and also send sms, which I couldn't do anymore for some reason).
I still have the issue where the bootloader screen appears everytime I turn my phone on, and I still can't re lock my device because I can't flash anything either. I've recovered all of my data, so I think I'm going to stick with that for a moment but maybe I'll try what you said some day.
Again, really thank you for helping me!

drmuruga said:
Flash latest twrp via fastboot and reboot into recovery ,
don't reboot into system, reboot into recovery manually, then you can enter twrp recovery and can flash supersu 2.62.3.
when you just reboot after flash twrp and reboot system erase custom recovery and save stock recovery, so don't enter fastboot reboot, enter fastboot reboot recovery after flash recovery via pc.
Click to expand...
Click to collapse
Now I understand why my flashing TWRP did not take. I simply rebooted to system and still have stock recovery installed. I was successful booting twrp via fastboot and successfully flashed supersu 2.62.3. Is this step in listed in any faq? I must have missed it.
So after flashing TWRP, do you then power down device prior to manually booting to recovery?

MrTooPhone said:
Now I understand why my flashing TWRP did not take. I simply rebooted to system and still have stock recovery installed. I was successful booting twrp via fastboot and successfully flashed supersu 2.62.3. Is this step in listed in any faq? I must have missed it.
So after flashing TWRP, do you then power down device prior to manually booting to recovery?
Click to expand...
Click to collapse
Don't power down, already you are in fastboot mode, you can just enter recovery from that. I forget the reference, but i will search and post.
---------- Post added at 04:41 PM ---------- Previous post was at 04:18 PM ----------
I get this from twrp official page
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
In our phone press simultaneously volume down + power button to enter recovery.