I am HTCDev unlocked and I am runnin ViperS 1.41 is there anyway to flash Faux kernel? I tried the Viper-application and it didn't work.
I remember something with Hboot but I don't know where to get the kernel img.
If you are already using ViperS rom you should be able to flash Faux kernel from your recovery. Just download the kernel you want to flash, place it on your sd card, go to 4ext recovery (make sure smartflash is on) and just flash it. I assume (correct me if I'm wrong) along with "smartflash", the faux kernel will flash the boot.img automatically. Ohh and before you do anything make nandroid backup, so if it is not working then you will be able to restore your rom!
Well it didn't work and I can't restore from backups nor install new roms, it just bootloops all the time, I have tried to format all partitions (except sd card) with 4EXT tried with and without smartflash.. sigh.
A fresh start could help. If you are htcdev unlocked, s-on, 4ext recovery installed and you follow THIS guide, you will be able to install roms. If it doesn't boot up after you enabled smartflash in 4ext then do step "extra1" from that guide
Well in the HBoot it says that I am unlocked, but it's worth giving a try, I am pretty sure that you know better than I do,
I redid everything; First HTCDev unlock, flash recovery and then try to flash a new rom. It didn't work so now I will try to do a RUU.
Just enable smartflash and flash the kernel that will do for you
Now as you are SON you should always make sure that smartflash is enabled all the time..whatever you are flashing
Sent from my HTC Sensation using xda premium
Not to be offensive or anythign, but it's kinda hard to flash a kernel when I am stock in a bootloop. I'm downloading the RUU right now and I hope that it fixes it.
I have tried flashing, wiping, smartflashing etc. on Bruce's and ViperS (both 1.35 and 1.41) and also flash from backups. Everything have just bootlooped.
I don't get what you mean on "hard to flash a kernel when I am stock in a bootloop". You don't need to power up your rom to flash a kernel. You go into recovery, enable smartflash, choose the zip file from the sd card and that's it. Also try another kernel and see if that works. I recommend Overclocked Kernel v1.5.2 by SebastianFM as well. I am using that on stock sense rom and it works very well. If you flash a rom and you follow everything word by word in the thread was linked to you then it must work. If you still have issues, then try to post in that thread and someone will help you there.
No I don't need a rom to flash a kernel, but I need to be able to flash a rom, and apparently something went wrong (I don't know what). If you read my prior posts you'd understand what I mean. I couldn't flash any roms (and both ViperS and Bruce have a built into the rom kernel), so I were forced to get a RUU (The XE RUU is hard to find) and do everything from the very start (not just do step one).
Blackzter said:
No I don't need a rom to flash a kernel, but I need to be able to flash a rom, and apparently something went wrong (I don't know what). If you read my prior posts you'd understand what I mean. I couldn't flash any roms (and both ViperS and Bruce have a built into the rom kernel), so I were forced to get a RUU (The XE RUU is hard to find) and do everything from the very start (not just do step one).
Click to expand...
Click to collapse
did you try also to flash the boot.img of the rom manually?
Blackzter said:
No I don't need a rom to flash a kernel, but I need to be able to flash a rom, and apparently something went wrong (I don't know what). If you read my prior posts you'd understand what I mean. I couldn't flash any roms (and both ViperS and Bruce have a built into the rom kernel), so I were forced to get a RUU (The XE RUU is hard to find) and do everything from the very start (not just do step one).
Click to expand...
Click to collapse
You got me wrong mate. Under do step "extra1" I mean do step EXTRA1. There is a step called Extra1 in the thread I linked before. That explains how to flash boot.img manually.
Related
SO I'm planning to flash the Elegancia ROM with Sense 4.0 included (http://forum.xda-developers.com/showthread.php?t=1429953). I've never done this before, and I'm on stock ICS, rooted and HTCDev Unlocked. It says in the directions that you need to flash first the Firmware Package posted by Mike. Do I need to do this, since I'm already on 3.32 ICS?
It also says, that The second requirement is to have EXT4 recovery to enjoy the interactive installation. I am using Clockwork, so I assume I will have to change from Clockwork to EXT4 Recovery?
Thank you
FnH84 said:
SO I'm planning to flash the Elegancia ROM with Sense 4.0 included (http://forum.xda-developers.com/showthread.php?t=1429953). I've never done this before, and I'm on stock ICS, rooted and HTCDev Unlocked. It says in the directions that you need to flash first the Firmware Package posted by Mike. Do I need to do this, since I'm already on 3.32 ICS?
It also says, that The second requirement is to have EXT4 recovery to enjoy the interactive installation. I am using Clockwork, so I assume I will have to change from Clockwork to EXT4 Recovery?
Thank you
Click to expand...
Click to collapse
Yeah as you are on stock ics you already got the ics required firmware i.e. 3.32
I recommend you to have 4EXT as the latest one has smartflash mode.. which is pretty helpful in flashing SON devices..
Just go to this thread.http://forum.xda-developers.com/showthread.php?t=1377759.and get the 4EXT recovery updater apk..and install the latest one (1.0.0.5) ..through an app.
Just don't forget to say "yes" when asked whether you are SON...which enables smartflash during installation.
Then you can install any ROM just by flashing through recovery.. (follow OP thread on how to flash Rom to have a proper working of the Rom)
sent from my blazing fast pyramid through sonic waves
You dont need to flash firmware because you have already.
Flashing 4EXT recovery touch will replace your current recovery.
Download in PG58IMG format from HERE
EDIT: ooops, someone was quicker than me in answering
I'm having problems flashing my Desire S with ICS based roms. GB roms work fine, but any ICS rom I flash gets stuck on boot on a lit up black screen. I have tried a variety of roms, flashed both on CWM and 4EXT but the issue persists. Is there some kind of special procedure for ICS roms ?
Did you
1. Wipe all partitions except SD
2. Wipe dalvik + cache
Edit : And the procedures same for flashing ics and gb roms, unless the OP specifically tells you to do otherwise
I did all possible wipes and It's still the same. Any more ideas ?
tomkow4 said:
I did all possible wipes and It's still the same. Any more ideas ?
Click to expand...
Click to collapse
did u u unlock with HTCDEV.com ? if u did just flash the boot.img inside the rom you want if u never then either the rom takes a long time to boot or your not doing the wipe properly
give me some specs of your phone
Ok, I'll run through my process. I did unlock my phone via HTCDEV, then rooted it via SuperOneClick (meaning I still have HBoot 2.00.0002 and S-ON), then flashed it by flashboot with CWM, now I have 4EXT. What I always did whas do a wipe data/factory reset and flashed. Now inspired by vodka69er I did that and clear dalvik, cache, format all but sd - and then flashed - still the same.
tomkow4 said:
Ok, I'll run through my process. I did unlock my phone via HTCDEV, then rooted it via SuperOneClick (meaning I still have HBoot 2.00.0002 and S-ON), then flashed it by flashboot with CWM, now I have 4EXT. What I always did whas do a wipe data/factory reset and flashed. Now inspired by vodka69er I did that and clear dalvik, cache, format all but sd - and then flashed - still the same.
Click to expand...
Click to collapse
If you unlocked via htcdev you need to extract the boot.img from your desired ROM. After flashing the ROM you need to flash the boot.img manually via adb. You have to do this each time you flash a new ROM.
Sent by my fingers to your head.
He's been able to flash the gb based roms , only trouble with the ics ones. That means he already knows to flash the boot img separately(unlocked with htcdev) or am I missing something
Vodka69er said:
He's been able to flash the gb based roms , only trouble with the ics ones. That means he already knows to flash the boot img separately(unlocked with htcdev) or am I missing something
Click to expand...
Click to collapse
This. Exactly. I mean I have a MIUI GB rom so, I guess it's not about flashing a rom but trouble with ICS ones. So I figured that those must have something different about them or have a specific prerequisite. Others have flashed their D S's, so I'm kind of lost.
Can you post what you see on your bootloader
Sent from a Desire S waiting for Kernel 3. WAKE UP HTC!!!!
*** UNLOCKED ***
SAGA PVT SHIP S-ON RL
HBOOT - 2.00.0002
Radio - 3822.10.08.04_M
eMMC - boot
Aug 22 2011, 15:22:13
@op
I know that this is covering old ground, but I've not seen an actual answer
Have you ever used 'fastboot flash boot NAME.IMG' command?
Swyped from my DesireS
http://www.androidauthority.com/desire-s-root-s-off-hboot-2-00-0002-superoneclick-74470/ - this is the guide I followed.
On a side note, I did a full wipe of everything I could and still no luck with ICS roms. I think I'll leave it alone.
You still didn't answer the question that I asked in the above post, the guide that you have doesn't cater for separately flashing the boot , which is what you need to do. The guide only tells you gore to instal recovery and root
Which (as people have been saying) means that i suspect that your ICS installs have no kernels and therefore don't/can't boot
What ROM are you running now?
As after wiping all nothing should boot, unless CWM wipe all doesn't wipe boot?
Swyped from my DesireS
ben_pyett said:
You still didn't answer the question that I asked in the above post, the guide that you have doesn't cater for separately flashing the boot , which is what you need to do. The guide only tells you gore to instal recovery and root
Which (as people have been saying) means that i suspect that your ICS installs have no kernels and therefore don't/can't boot
What ROM are you running now?
As after wiping all nothing should boot, unless CWM wipe all doesn't wipe boot?
Swyped from my DesireS
Click to expand...
Click to collapse
To answer directly - I don't remeber/don't think so. But honestly didn't care much since my roms ran. Right now I'm on MIUI.
But the remark on the kernel got me thinking - I don't really know how to approach this, should I find some kernel and flash it?
On your pc you need to open the ICS ROM zip file and take out a file called boot.img
After flashing the Rom you must then use the fastboot command from your PC, as you did when you flashed your recovery.
You must then issue the command 'fastboot flash boot boot.img'
see below for the full instructions
HappyEmu said:
If you unzip your ROM's Zip-file (the one you want to flash, you'll find a file called "boot.img". Move it into the same folder as your adb and fastboot executables (Android SDK) and flash it using fastboot.
To be a little more specific:
1. Extract boot.img from ICS rom zip file and move it in the same folder as your fastboot.exe (Android SDK) on your PC
2. Flash the ICS Rom as usual from recovery (don't forget to first perform the full wipe/format including the boot partition)
3. Boot into fastboot mode, connect your phone to your PC and flash boot.img using fastboot
Code:
fastboot flash boot $pathToYourBootIMG\boot.img
4. Reboot
Click to expand...
Click to collapse
Swyped from my DesireS
Your GB room worked as they were running on the stock kernel
ICS won't work this way.
As Ben has mentioned you need to flash the boot.img
Sent from a Desire S waiting for Kernel 3. WAKE UP HTC!!!!
eyahl said:
If you unlocked via htcdev you need to extract the boot.img from your desired ROM. After flashing the ROM you need to flash the boot.img manually via adb. You have to do this each time you flash a new ROM.
Sent by my fingers to your head.
Click to expand...
Click to collapse
*Bump*
Sent by my fingers to your head.
suku_patel_22 said:
Your GB room worked as they were running on the stock kernel
ICS won't work this way.
As Ben has mentioned you need to flash the boot.img
Click to expand...
Click to collapse
4EXT seems to flash the kernel upon installation of specific roms, but I still did it manually and ... nothing. It still goes into a coma upon boot. Maybe I'll do a video of what I'm doing when I get back from work, cause now I'm having problems with some other roms - they freeze on bootscreen. Maybe it has something to do with my phone being S-ON?
tomkow4 said:
4EXT seems to flash the kernel upon installation of specific roms, but I still did it manually and ... nothing. It still goes into a coma upon boot. Maybe I'll do a video of what I'm doing when I get back from work, cause now I'm having problems with some other roms - they freeze on bootscreen. Maybe it has something to do with my phone being S-ON?
Click to expand...
Click to collapse
I suspect that you're suffering the problem on other ROMS now as you're wiping the boot partition and therefore have no kernel.
[Q] How long do you wait on boot? you must be patient as first boot can take a while (although not longer than 10minutes).
A video would be a great way of showing the problem...Try to capture everything....
Your bootloader screen....
All the partition wipes
The Rom flash
The fastboot boot.img flash
and then what happens after...
Kind of noobish on my end, but as I was making the video - and did everything according to protocol just as earlier - it worked . I flashed BlackICE 5.5. Christ. Thanks anyway for the patience guys (I assume )
To cut a long story short, it seems the HBOOT on my Sensation is the latest one and is not compatible with Revolutionary, doesn't even get upto the point where it's meant to generate the beta key, just says HBOOT isn't supported.
Short of jamming wires into my phone, it seems I can't get S-OFF on the current HBOOT, but I have got the official HTC Dev bootloader unlock working fine and my phone is currently rooted on the stock ICS ROM.
However I want to install CM9 on my phone. AFAIK, with the official HTC bootloader unlock my kernel and radio cannot be changed but everything else can.
So can I install CM9 successfully using CWM if I have the official bootloader unlock or will it only work with S-OFF? I guess the real question is will CM9 on the Sensation work with the default kernel, radio, and firmware?
Thanks!
NVM, finally found a good guide to flash custom ROMs and with custom kernels with S-ON if you are HTC bootloader unlocked, will use this for CM9 and see how it goes
did you find that after doing this it messed up your wifi, cuz near the end it says there's a possibility?
Been using it for a day and WiFi works perfectly.
The WiFi will only be a problem if the kernel doesn't flash, but in the case of CM9 it needs a custom kernel to even boot anyway, the Sense kernel won't work. So if CM9 boots it'll work
Also 4EXT has been updated since that thread was written and when you install the 4EXT recovery it now asks you if your device is S-ON, if you hit yes it'll turn the SmartFlash thing on automatically. What that does is flash the kernel separately before you exit the recovery to reboot back into Android and in my case it worked fine
Only catch is that you can only install ROMs for your current firmware. I have 3.32 so I can pretty much install any ICS ROM, but I can't install a GB ROM and I might not be able to install a Jellybean ROM, for example. But I'll cross that bridge when I come to it
I had this too, and I found out that I could flash only ROMs, where kernel is ready made .img file inside the zip. To do this, I needed to install the ROM (it installed into /system, but the kernel couldn't be installed due to protection), reboot into fastboot, and flash the extracted kernel img with ADB from the PC (as ADB was only way to flash kernel).
If there was a custom installer where I could configure the kernel (set CPU speed etc)., that would mean that the kernel image is assembled during installation, and it is not readily available in ROM. In that case, I was f***ed .
Most ROMs have the standard boot.img file in the .zip though, and you can check it by just extracting the files and taking a look
The 4EXT process basically does the same as you did but automatically, it's just as much effort as flashing a ROM normally
I see one problem with that your are using cwm as the recovery and that simply will not work because you can't flash kernels because your s on but there's light at the end of the tunnel but you must be rooted to do this you Will need to install 4ext custom recovery why because it will allow you to flash kernels with smart flash enabled and you can't do that with cwm
Sent from my Sensation Z710e using xda premium
To the Guru of this forum. After my last rom flashing my device is keeping booting into recovery :crying:. Is it briked ? If so my only hope is the unbricking project ? Thanks in advance.
What recovery are you running?
Can you use the power menu within recovery to boot into bootloader?
Also, please provide as much pertinent info as possible, ie: rom you flashed, firmware, s-off or s-on, locked or unlocked. With your description it's basically like saying, "my car makes a noise all the time. what is causing it?".
Its not bricked.If u can enter recovery
Sent from my HTC sensation
Sorry you are right:
What recovery are you running? 4Ext
Can you use the power menu within recovery to boot into bootloader? yes
The device is HTC unlocked with S-On.
Rom JBMIUI v4.1 2.8.31 R2.
HBOOT 1.27.0000
firmware 3.33.401.6
I've format everything but SD. Restored the most recent back up done today before flashing. Once it reboots HTC logo comes up once, black screen, HTC logo, 4Ext is coming up saying that smartflash it is set to update the boot partition on next system start asking if this should be removed.
I've downloaded and installed again PG58IMG *different files using bootloader
I've founded a 3.33.401.6-Unsecured-Boot.img,+Root+Busybox zip file that can be installed via recovery but it did not help.
At this point I need a bit of help to look into the right direction and I'm not sure that Unbrick_Pyramid is the right way.
Thanks again.
Try turning off smartflash and flash a 3.33 stock rom to see if it will boot.
What was your last working setup, and what were you trying to install?
Sent from my HTC Sensation 4G using Tapatalk 2
Hi. Manage to flash a stock 3.33.
It stopped to reboot straight into recovery.
Sits now on HTC logo now for about 10 mins. I plan to let him run for 1 hr and see what happens.
Was thinking to install CWM on the basis that could be a 4ext recovery issue, toughs?
GROGG88 said:
Try turning off smartflash and flash a 3.33 stock rom to see if it will boot.
What was your last working setup, and what were you trying to install?
Sent from my HTC Sensation 4G using Tapatalk 2
Click to expand...
Click to collapse
If you can install clockworkmod that may help.
Tge device isnt getting the message that it has already booted into recovery once. So something may be jacked up with 4ext.
Clockwork may bypass all that when it doesnt know what to do with that signal to run smartflash.
Worst case scenario...put a full pm58img containing a rom and recovery on the sf card and flash that through bootloader.
You should still be able to get to bootloader as the device looks for that option first.
Sent from my HTC Sensation using xda app-developers app
Hallo. Ok installed CWM. Can please direct me to a full pm58img as you mentioned ? Thx.
Skipjacks said:
If you can install clockworkmod that may help.
Tge device isnt getting the message that it has already booted into recovery once. So something may be jacked up with 4ext.
Clockwork may bypass all that when it doesnt know what to do with that signal to run smartflash.
Worst case scenario...put a full pm58img containing a rom and recovery on the sf card and flash that through bootloader.
You should still be able to get to bootloader as the device looks for that option first.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
DiscreteTask said:
Hallo. Ok installed CWM. Can please direct me to a full pm58img as you mentioned ? Thx.
Click to expand...
Click to collapse
And did that help? Are you able to get into recovery without errors now? If so you should be able to flash a fresh version of any ROM.
Try that first. Get any ROM. Flash it. See if it boots.
If you have successfully replaced 4EXT I will bet a fresh flash of a ROM will now boot.
Also worth a shot is replacing or upgrading the firmware, as that could be what's sending the phone into recovery on each boot (though this is less likely that 4EXT just being broken)
Flash a firmware PM58IMG like 3.32 or 3.33 and see if that helps.
But for starters, put a fresh ROM on the SD card and flash it with CWM. (BE SURE IT'S A ROM THAT DOESN'T REQUIRE 4EXT!!)
Once you've got it all fixed you can switch back to 4EXT. I have a feeling it was just the copy you were running that got botched. The software itself is solid and stable. A new copy shoudl work fine now.
CWM v5.0.2.0 was installed fine.
3.33 firmware installed once again.
Using this I've installed ROM that I already did in the past w/o luck, they all sit on the HTC logo. Is like the initial boot sequence is broken. Is boot.img part of the firmware or ROM ?
Trying to download some additional ones.
Thanks,
Skipjacks said:
And did that help? Are you able to get into recovery without errors now? If so you should be able to flash a fresh
version of any ROM.
Try that first. Get any ROM. Flash it. See if it boots.
If you have successfully replaced 4EXT I will bet a fresh flash of a ROM will now boot.
Also worth a shot is replacing or upgrading the firmware, as that could be what's sending the phone into recovery on each boot (though this is less likely that 4EXT just being broken)
Flash a firmware PM58IMG like 3.32 or 3.33 and see if that helps.
But for starters, put a fresh ROM on the SD card and flash it with CWM. (BE SURE IT'S A ROM THAT DOESN'T REQUIRE 4EXT!!)
Once you've got it all fixed you can switch back to 4EXT. I have a feeling it was just the copy you were running that got botched. The software itself is solid and stable. A new copy shoudl work fine now.
Click to expand...
Click to collapse
DiscreteTask said:
CWM v5.0.2.0 was installed fine.
3.33 firmware installed once again.
Using this I've installed ROM that I already did in the past w/o luck, they all sit on the HTC logo. Is like the initial boot sequence is broken. Is boot.img part of the firmware or ROM ?
Trying to download some additional ones.
Thanks,
Click to expand...
Click to collapse
The more details you give, the better the answers will be. Don't consider any detail too small.
What do you mean you installed ROM's that you had done in the past? Do you mean you are trying to restore a backup made with 4EXT?
That won't work. You need to flash a fresh version of the ROM after wiping.
Also, CWM won't install some ROM's that you may have used in the past. What ROM are you trying to install?
The HTC logo that first pops up when you hit the power button is part of the firmware.
Make sure you do a full wipe of everything but the SD card from within CWM. Get whatever's causing the problem off that way. Then flash a fresh install of a ROM from scratch.
Hi.
I did not use any backup only fresh ROMs: ARHD, Elegantia, but also stock ROMs I could find.
I've tried also some PG58IMG with ROM included.
Cheers.
Skipjacks said:
The more details you give, the better the answers will be. Don't consider any detail too small.
What do you mean you installed ROM's that you had done in the past? Do you mean you are trying to restore a backup made with 4EXT?
That won't work. You need to flash a fresh version of the ROM after wiping.
Also, CWM won't install some ROM's that you may have used in the past. What ROM are you trying to install?
The HTC logo that first pops up when you hit the power button is part of the firmware.
Make sure you do a full wipe of everything but the SD card from within CWM. Get whatever's causing the problem off that way. Then flash a fresh install of a ROM from scratch.
Click to expand...
Click to collapse
Arhd and elegencia wont work with cwm. So there is your isdue. Try cm9 or 10 to see if you can boot one of those.
Sent from my HTC Sensation using xda app-developers app
Hallo, after trying all option the following did work for me:
- re-lock bootloader via fastboot oem lock
- apply stock ROM founded in this list http://forum.xda-developers.com/showthread.php?t=1074559
- rebooted fine
I guess that HTC RUU had some superpower and erase and installed whatever file(s) were corrupted.
Now I'm on stock 3.6 - fw 3.33.401.106 - radio 11.76A.3504.00UU_11.24A.3504.31_M
HBOOT 1.29 - S-ON - Relocked.
Standard Recovery.
Now I'm reading how to return my device to S-OFF w/o damaging it again.
Many thanks to skipjacks & groog88 :good:
Skipjacks said:
Arhd and elegencia wont work with cwm. So there is your isdue. Try cm9 or 10 to see if you can boot one of those.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
Hey guys I just wanna to check and make sure I'm doing everything right before I flash cause I don't need anymore paperweights
1.I have successfully unlocked my bootloader and installed twrp recovery and rooted.
2. Now I want to back up my entire setup: rom, apps, setting, data, everything so that if I ever want to return to stock then I can. I have booted into twrp and ran backup and selected all options. Is that how you perform a nandroid backup in twrp or is there more to it?
3. I want to install team venom viper xl rom. Do I have to first flash boot.img first or is the kernel the same in stock and viper xl so that isn't necessary? Do I have to do I factory reset first or what?
I'm still new to this stuff so please bear with me. Thank for all your help!!
ImagioX1 said:
Hey guys I just wanna to check and make sure I'm doing everything right before I flash cause I don't need anymore paperweights
1.I have successfully unlocked my bootloader and installed twrp recovery and rooted.
2. Now I want to back up my entire setup: rom, apps, setting, data, everything so that if I ever want to return to stock then I can. I have booted into twrp and ran backup and selected all options. Is that how you perform a nandroid backup in twrp or is there more to it?
3. I want to install team venom viper xl rom. Do I have to first flash boot.img first or is the kernel the same in stock and viper xl so that isn't necessary? Do I have to do I factory reset first or what?
I'm still new to this stuff so please bear with me. Thank for all your help!!
Click to expand...
Click to collapse
Wipe flash Rom flash boot IMG sit back enjoy
ImagioX1 said:
Hey guys I just wanna to check and make sure I'm doing everything right before I flash cause I don't need anymore paperweights
1.I have successfully unlocked my bootloader and installed twrp recovery and rooted.
2. Now I want to back up my entire setup: rom, apps, setting, data, everything so that if I ever want to return to stock then I can. I have booted into twrp and ran backup and selected all options. Is that how you perform a nandroid backup in twrp or is there more to it?
3. I want to install team venom viper xl rom. Do I have to first flash boot.img first or is the kernel the same in stock and viper xl so that isn't necessary? Do I have to do I factory reset first or what?
I'm still new to this stuff so please bear with me. Thank for all your help!!
Click to expand...
Click to collapse
Different kernel. it is using the 2.41 RUU. So go ahead and flash the boot.img
Here's what you should do for any new ROM with a different kernel.
Wipe System
Factory Reset
Flash boot.img
Flash the ROM
flash gapps (if AOSP based)
reboot and have fun
When doing a nandroid backup, it is only necessary to backup
System
Data
Boot
Ok thanks for your response but I'm still a little confused. First did I back up my current rom properly so that I can return to it later on? Secondly does viper and boot img have to be flashed or can they be installed from sdcard via twrp? If they have to be flashed whats the fastboot command.?
ImagioX1 said:
Ok thanks for your response but I'm still a little confused. First did I back up my current rom properly so that I can return to it later on? Secondly does viper and boot img have to be flashed or can they be installed from sdcard via twrp? If they have to be flashed whats the fastboot command.?
Click to expand...
Click to collapse
You backed up fine, it just takes up a little more space.
You have to extract the boot.img from the ROM and put it in the same folder as fastboot.exe
open command prompt, and navigate to the folder fasboot.exe is in and do the following command
fasboot flash boot boot.img
If it gets stuck at waiting for device, reboot into your bootloader, boot into fastboot from there. and then try again.
ImagioX1 said:
Ok thanks for your response but I'm still a little confused. First did I back up my current rom properly so that I can return to it later on? Secondly does viper and boot img have to be flashed or can they be installed from sdcard via twrp? If they have to be flashed whats the fastboot command.?
Click to expand...
Click to collapse
Viper is the Rom u flash it from twrp it's. azip file that's fkashable so make it easy and flash viper there and than flash the boot IMG from fastboot the command is all over the forums I thinks it fastnoot flash boot.img
don't be confused. read.
you always have to flash boot.img in fastboot "fastboot flash boot boot.img" then flash the zip in twrp make sure to wipe, and don't download international roms. you still have to flash the boot.img from your backed up rom.
like a hundred threads asking the same stuff because no one wants to read
DvineLord said:
don't be confused. read.
you always have to flash boot.img in fastboot "fastboot flash boot boot.img" then flash the zip in twrp make sure to wipe, and don't download international roms. you still have to flash the boot.img from your backed up rom.
like a hundred threads asking the same stuff because no one wants to read
Click to expand...
Click to collapse
I'm sorry but I did read. I saw that if you have the same kernel as that of the rom you're flashing you don't have to flash boot.img. So I asked to see if stock and viper have the same kernel. I don't want to flash anything that will brick my phone.
Now one more question if you don't mind answering. I also saw that you can't downgrade RUU. So if viper is based on 2.41 RUU and stock is 2.20 RUU then will I be able to go stock after flashing viper?
I really do appreciate yalls help. i would be where I am if it weren't for you.
ImagioX1 said:
I'm sorry but I did read. I saw that if you have the same kernel as that of the rom you're flashing you don't have to flash boot.img. So I asked to see if stock and viper have the same kernel. I don't want to flash anything that will brick my phone.
Now one more question if you don't mind answering. I also saw that you can't downgrade RUU. So if viper is based on 2.41 RUU and stock is 2.20 RUU then will I be able to go stock after flashing viper?
I really do appreciate yalls help. i would be where I am if it weren't for you.
Click to expand...
Click to collapse
Yes. Just wipe you system and do a factory reset , and flash the boot.IMG for 2.20 and then flash the Rom.
If you want true stock 2.20 then you will have to relock your bootloader and then run the 2.20 RUU. You would only want to do this if making a warranty claim or something. If you want stock rooted, then yes, do what I said above
Sent from my HTC One XL using xda app-developers app
absolutelygrim said:
Yes. Just wipe you system and do a factory reset , and flash the boot.IMG for 2.20 and then flash the Rom
Sent from my HTC One XL using xda app-developers app
Click to expand...
Click to collapse
Ok got it. I do appreciate your help. Flashing now.
downgrading only refers to the ruu not the zipped roms. so you can't run 1.85 ruu after running 2.20 ruu/ota but you can still flash a rom based on 1.85.
if you are reflashing the same rom you don't have to reflash boot.img but if you are flashing a new rom then you need to flash boot.img. 7-zip will tell you the crc32 of files so you see tell if it's a different checksum.
Viper Xl's great. Seems to be slightly slower than stock on some task, but the lack of bloatware, and the extensive customization is worth it. Haven't found any bugs or nothing so far. If anyones familiar with viperxl though what is the last app in the app drawer? Its got a chinese name? When it loads it says Dolby Surround but all the writing is in chinese?
ImagioX1 said:
Viper Xl's great. Seems to be slightly slower than stock on some task, but the lack of bloatware, and the extensive customization is worth it. Haven't found any bugs or nothing so far. If anyones familiar with viperxl though what is the last app in the app drawer? Its got a chinese name? When it loads it says Dolby Surround but all the writing is in chinese?
Click to expand...
Click to collapse
That's because you flashed the Voodoo mod, it's apart of the mod, theres a chinese part and a english one called "Dolby Digital" or "Dolby Surround"
When I flash ViperXL 3.1.0 JB do I need to flash a radio too? My phone has hboot 1.4 and software 2.2, so I understand that I cant flash radio with hboot 1.4? Does this mean I need to downgrade my hboot/software version?
CrossFire78 said:
When I flash ViperXL 3.1.0 JB do I need to flash a radio too? My phone has hboot 1.4 and software 2.2, so I understand that I cant flash radio with hboot 1.4? Does this mean I need to downgrade my hboot/software version?
Click to expand...
Click to collapse
Most people have good luck w/out flashing another radio.
ronnie498 said:
Most people have good luck w/out flashing another radio.
Click to expand...
Click to collapse
Hmm. Might there be a patch I'm missing out on? I just flashed one file -ViperXL 3.1.0 JB - Android File Host (692MB)
edit- Works now after another reinstall installed boot image first this time.