Related
Hi All,
My SGS 3.5mm jack video out test
Hmm... non-responsive touch screen whilst trying TV-out...
Hi, nice vid.
What firmware do you run on your SGS? I tried myself today (Norway - PAL - on old CRT TV) and got great pictyre and sound, but the touchscreen was nonresponsive, only the buttons worked. I'm still on 2.1 though.. (JM3 with modico lagfix).
Thanks!
Tm
yeah it looks ok on a smaller screen, on my 46" sammy oled it looks like poo of course it's standard composite
sundappen said:
Hi, nice vid.
What firmware do you run on your SGS? I tried myself today (Norway - PAL - on old CRT TV) and got great pictyre and sound, but the touchscreen was nonresponsive, only the buttons worked. I'm still on 2.1 though.. (JM3 with modico lagfix).
Thanks!
Tm
Click to expand...
Click to collapse
I9000XWJM1. May flash to newer rom soon.
BA_Flash_GOD said:
yeah it looks ok on a smaller screen, on my 46" sammy oled it looks like poo of course it's standard composite
Click to expand...
Click to collapse
the video was captured on 42" Panasonic LCD Tv
sundappen said:
Hi, nice vid.
What firmware do you run on your SGS? I tried myself today (Norway - PAL - on old CRT TV) and got great pictyre and sound, but the touchscreen was nonresponsive, only the buttons worked. I'm still on 2.1 though.. (JM3 with modico lagfix).
Thanks!
Tm
Click to expand...
Click to collapse
Sounds like a problem with your cable! SGS's touchscreen is very sensitive to electrical current, so a bit of current leak from a not-so-great cable will make your touch screen non responsive. Same thing happens with some charging cables.
I have the exact same cable as he's using in the video, but will indeed try it on another TV as soon as I get the chance. Thanks for input!
Will give feedback.
Tm
RyanZA said:
Sounds like a problem with your cable! SGS's touchscreen is very sensitive to electrical current, so a bit of current leak from a not-so-great cable will make your touch screen non responsive. Same thing happens with some charging cables.
Click to expand...
Click to collapse
sundappen said:
I have the exact same cable as he's using in the video, but will indeed try it on another TV as soon as I get the chance. Thanks for input!
Will give feedback.
Tm
Click to expand...
Click to collapse
I tried 2 different Nokia CA-75U cables, both working fine. Never rules out hardware (cable) failure
Roy Ngan said:
the video was captured on 42" Panasonic LCD Tv
Click to expand...
Click to collapse
oh ok then you know what I'm talking about, it's usable for a slight presentation etc (what it was made for i'm sure) but for movie watching/HD content not so much. Perhaps they could have danked the GPS and included HDMI since the hardware could easily push HD content. That would have been a lot more usable for mobile media pushers I suppose. Great video to show people though.
no picture
Hi,
Maybe someone here can help me, I've been trying to get the TV-out to work on my SGS but whenever I active this feature the TV looks like it's trying to show the image but it's stretched to the side and you cannot get a picture.
I have so far tried this with my phone running Eclair and the Froyo, 2 different cables and about 4 TVs and they all show the exact same thing. Also used LaucherPro as well as the default TWLauncher.
Thanks
shaolin_bubu said:
Hi,
Maybe someone here can help me, I've been trying to get the TV-out to work on my SGS but whenever I active this feature the TV looks like it's trying to show the image but it's stretched to the side and you cannot get a picture.
I have so far tried this with my phone running Eclair and the Froyo, 2 different cables and about 4 TVs and they all show the exact same thing. Also used LaucherPro as well as the default TWLauncher.
Thanks
Click to expand...
Click to collapse
You need to find the right setup between your SGS and TV
PAL or NTSC.
been trying this feature on the 3rd day bought my SGS which is last year..
im using the nokia 5800 express music TV Out cable also.. work fine.. play video, games, all the thing.. got no prob..
thats what make i really luv my SGS.. ^_^
Roy Ngan said:
You need to find the right setup between your SGS and TV
PAL or NTSC.
Click to expand...
Click to collapse
I've tried both PAL and NTSC.
What else could be the issue?
shaolin_bubu said:
I've tried both PAL and NTSC.
What else could be the issue?
Click to expand...
Click to collapse
You must used the wrong cable. The 3.5mm jack with 4 sections (gnd, video, right sound, left sound) is not well definitized. So different manufacturers make the imcompatible cables. You just buy a samsung or nokia cable, then it will must work!
Which nokia cable you use? Is it the same cable shown in the video link in my signature?
shaolin_bubu said:
I've tried both PAL and NTSC.
What else could be the issue?
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
I was wondering if these ir transmitters can be used with the Nexus Phone to use as a universal remote
raviraaj said:
I was wondering if these ir transmitters can be used with the Nexus Phone to use as a universal remote
Click to expand...
Click to collapse
The N5 doesn't have an IR transmitter.
alacrify said:
The N5 doesn't have an IR transmitter.
Click to expand...
Click to collapse
I referred to a link to ir emitters from ebay that plug into your headphone jack
raviraaj said:
I referred to a link to ir emitters from ebay that plug into your headphone jack
Click to expand...
Click to collapse
Ah, sorry, didn't click the link.
That's a pretty ingenious idea whoever came up with it. I don't see why it wouldn't work technically if the software to control the emitter is written correctly for kitkat...
awesomeness
I totally want one. Hope someone does come out with a program to use these gadgets to make a simple remote control add on.
jahman42 said:
I totally want one. Hope someone does come out with a program to use these gadgets to make a simple remote control add on.
Click to expand...
Click to collapse
And then you realized that you will never hear any sound from your nexus, because there is something in your headphone jack. You will have to unplug it whenever you are not using the phone as a remote.
I conclude that i totally don't want one.
Dlog said:
And then you realized that you will never hear any sound from your nexus, because there is something in your headphone jack. You will have to unplug it whenever you are not using the phone as a remote.
I conclude that i totally don't want one.
Click to expand...
Click to collapse
My old phones had IR ports on them. My Cingular 8125, and 8525 both had them.
That being said, it's a crap waste of time that never amounts to anything more than a novelty.
GldRush98 said:
My old phones had IR ports on them. My Cingular 8125, and 8525 both had them.
That being said, it's a crap waste of time that never amounts to anything more than a novelty.
Click to expand...
Click to collapse
The HTC One and S4 also has it and we love having a smart remote.
I'm really interested in seeing how well that solution works
I was actually upset because my Nexus 5 didn't have one. I've used My Media Center on my last few phones to control my media center setup but I wish I could control everything from it.
I use xbmc so I don't need ir as there are plenty of apps to do it via the Wi-Fi network.
Sent from my Nexus 5 using Tapatalk
Is there a OTG alternative to add IR Blaster to the Nexus 5?
raviraaj said:
I was wondering if these ir transmitters can be used with the Nexus Phone to use as a universal remote
Click to expand...
Click to collapse
im gonna say no for your exact purpose you want out of the box this probably only works properly with their proprietary software for camera controls.. but with a lot of software hacking around it could be possible.
any pre existing apps out there that will be looking for a device driver in the kernel for a built in hardware IR transmitter so any universal remote apps wont find this device. now in theory if you had a rooted phone and the know how you could possibly hack up a fake driver that tells the OS its got an IR transmitter so the software will find it and that driver redirects to an analog signal and sends the output to the audio jack.
Or your gonna need to write custom apps just for this device to work as a universal remote, the propriety app appears to only do camera commands.
I wonder if Tasker has a way to generate tones? maybe if you could use tasker to do pulses of tones and use those as the on/offs of the IR LED, would take some work but i bet you could do it if you either had a very small short audio sample played in quick succession or if there were a tone generator yo ucould turn on/off really fast.
looking around found this..
A Sony IR signal starts with 2400 microseconds on and 600 microseconds off; that's the first wide pulse. A "1" bit is transmitted with 1200 microseconds on and 600 microseconds off, while a "0" bit is transmitted with 600 microseconds on and 600 microseconds off.
Click to expand...
Click to collapse
ive not played with tasker enough to know if it can do timing signals that short, maybe you could pre build a library of .wav files of each code to play into the IR LED.. so you'd have a pre recorded one for on one for off one for vol up etc etc and just play them on demand via tasker.
ps the website for the 5 to 6 dollar app on the android market has a how to build your own IR emitter http://www.wegroo.com/photoirmote/diyirmitter/ also the website says a operating range of 3 meters FYI... which would probably be dependant upon the IR LED's one used too. also interesting that camera remote software appears to also work with hardware built in IR emitters.
raviraaj said:
Is there a OTG alternative to add IR Blaster to the Nexus 5?
Click to expand...
Click to collapse
looked around this morning... found this. http://iguanaworks.net/products/usb-ir-transceiver/ works in linux and windows.. source code for drivers is GPL.. so possibly again if someone ports the code to a kernel driver for android...??? the second model on the pull down has built in emitters the one at the top uses IR blasters like OP had linked to. looks rather large i assume its a very simple circuit inside so if someone actually put some effort into it could probably get it a lot smaller if they had a preferred circuit board fab and skills to re do the design smaller.
---------- Post added at 12:39 PM ---------- Previous post was at 12:34 PM ----------
raviraaj said:
I was wondering if these ir transmitters can be used with the Nexus Phone to use as a universal remote
Click to expand...
Click to collapse
more random wandering on web...
looks to be pretty old and outa date.. http://www.slatedroid.com/wiki/index.php?title=Adding_IR_Output
Can it be used to control TV too ?
Dlog said:
And then you realized that you will never hear any sound from your nexus, because there is something in your headphone jack. You will have to unplug it whenever you are not using the phone as a remote.
I conclude that i totally don't want one.
Click to expand...
Click to collapse
Oh you "totally" dont, you sound like a girl. Good luck troll
raviraaj said:
Oh you "totally" dont, you sound like a girl. Good luck troll
Click to expand...
Click to collapse
No i really don't. Sounds like a good idea at first, but seriously: Are you going to live with having to un-/plug it constantly?
Just received my 3.5 ir blaster from ebay aaaaaaaaaaaaaaaaand doesn't work on my N5.
Hey everyone,
recently my SC-02h (Jap Docomo version) hard-bricked and has no way to recover besides JTAG or motherboard replacement.
This made me think of an experiment.
Can you replace any motherboard (which includes all chips and the storage) with another.
I ordered the g935FD dual sim version with the Exynos chip, this compared to my QC single sim version which is currently bricked.
Hopefully within the next few days I'll receive the motherboard and start the replacement process (I will probable film it) to see if it works.
If so, anyone could replace their motherboard by a new one that is unlocked or has a different chipset.
Please discuss here if you're also interested in changing your own mobo with another.
Can't see why it won't work as the motherboard is what determines the model. Just make sure you order up a dual SIM tray too.
Motherboards from different chipsets *may* have different connections on how things wire up. I'm not saying they do, I'm just thinking out loud. I'd only buy a replacement motherboard from the same variant.
And good luck finding a new motherboard. At the price they sell for, you'd be better off buying a whole new phone.
Would like to see how this goes. Please record the process.
Sent from my SM-G935T using Tapatalk
lyriquidperfection said:
Can't see why it won't work as the motherboard is what determines the model. Just make sure you order up a dual SIM tray too.
Click to expand...
Click to collapse
Yea I ordered that one, although I thought the tray looks the same (bottom part), so until my new one arrives I'll use the older one.
the_scotsman said:
Motherboards from different chipsets *may* have different connections on how things wire up. I'm not saying they do, I'm just thinking out loud. I'd only buy a replacement motherboard from the same variant.
And good luck finding a new motherboard. At the price they sell for, you'd be better off buying a whole new phone.
Click to expand...
Click to collapse
I checked the connections and they are the same, the only thing that differs is the sim holder and the chipset.
Also a new phone (unlocked) costs at least 2,5times more (live in Japan).
dogredwing1 said:
Would like to see how this goes. Please record the process.
Sent from my SM-G935T using Tapatalk
Click to expand...
Click to collapse
I'll record it on video as soon as it arrives, also the process of taking it out and replacing it completely. So if it ends up in failure you can all see it.
In what way is it bricked? The S7 is almost impossible to brick.
CuBz90 said:
In what way is it bricked? The S7 is almost impossible to brick.
Click to expand...
Click to collapse
Hmm I flashed a rom with TWRP, (lineage, but wrong build) after that I rebooted and the phone stopped responding completely.
So black screen, no led when charging, no response at all when pressing buttons.
Even disconnecting battery and reconnecting didn't work.
Also no recognition in windows when connected to USB
totalvamp said:
Hmm I flashed a rom with TWRP, (lineage, but wrong build) after that I rebooted and the phone stopped responding completely.
So black screen, no led when charging, no response at all when pressing buttons.
Even disconnecting battery and reconnecting didn't work.
Click to expand...
Click to collapse
Can't get to download mode?
CuBz90 said:
Can't get to download mode?
Click to expand...
Click to collapse
Well if I could I wouldn't be ordering a new MoBo
Even made a USB JIG
Another thing you might lose is waterproofness. I cracked my screen badly and instead of repairing it at a 3rd party shop, I sold it and got a new one. Coz it won't be waterproof anymore..
thedisturbedone said:
Another thing you might lose is waterproofness. I cracked my screen badly and instead of repairing it at a 3rd party shop, I sold it and got a new one. Coz it won't be waterproof anymore..
Click to expand...
Click to collapse
i should be fine, just get it glued back together properly.
besides i don't really care about it.
Unless the other components (camera, vibrator motor, various sensors, OLED Panel etc.) don't differ in the way they talk to the mainboard, I don't see why it shouldn't work. As others have said, I'd really love to see how it'll work out for you. So, thanks for sharing =)
Well it didn't work out, I put in the new motherboard but the phone didn't power on at all. There is also no led when trying to charge it. I'll be sending it back to the supplier and buy another version instead.
https://www.youtube.com/watch?v=jym2aNwRmkc
Made a video of the process and failure
totalvamp said:
https://www.youtube.com/watch?v=jym2aNwRmkc
Made a video of the process and failure
Click to expand...
Click to collapse
Was interesting to watch, however you only tried powering on twice and quit?
Connecting a charger had no effect?
Unless the board your received was dead to begin with.
totalvamp said:
https://www.youtube.com/watch?v=jym2aNwRmkc
Made a video of the process and failure
Click to expand...
Click to collapse
Can you share the link of where you bought the motherboard? It might be that you bought a blank motherboard. In that case you want it to be flashed with the correct IMEI and partition (table?). AFAIK the IMEI has to be that of your previous phone since you can't just "create" a new IMEI. Don't even want to get into the legal repercussions but here's a sneak peak; in some countries it's a criminal offence to alter an IMEI or even have tools to alter IMEI. Don't quote me on this and I'm asking the community to correct me. If the motherboard comes from a previously active device, it should have its own IMEI and none of what I said before matters.
Whatever, none of that necessarily explain why it didn't boot up. Have you tried charging and plugging it to a PC? If it isn't dead, your PC should at least detect A device.
murtaza02 said:
Was interesting to watch, however you only tried powering on twice and quit?
Connecting a charger had no effect?
Unless the board your received was dead to begin with.
Click to expand...
Click to collapse
Well I tried a few times after that and after letting it on a charger, still no response.
nitrous² said:
Can you share the link of where you bought the motherboard? It might be that you bought a blank motherboard. In that case you want it to be flashed with the correct IMEI and partition (table?). AFAIK the IMEI has to be that of your previous phone since you can't just "create" a new IMEI. Don't even want to get into the legal repercussions but here's a sneak peak; in some countries it's a criminal offence to alter an IMEI or even have tools to alter IMEI. Don't quote me on this and I'm asking the community to correct me. If the motherboard comes from a previously active device, it should have its own IMEI and none of what I said before matters.
Whatever, none of that necessarily explain why it didn't boot up. Have you tried charging and plugging it to a PC? If it isn't dead, your PC should at least detect A device.
Click to expand...
Click to collapse
http://www.ebay.com/itm/MAIN-MOTHER.../182310990269?ssPageName=ADME:X:RRNTB:NL:3160
It should be one with an IMEI how else can it be unlocked.
I tried plugging it in as well, but my PC doesn't recognise it at all.
I've ordered a different one this time, this motherboard was also slightly different from the one I had (2 cables instead of 3) so it might be incompatible.
I ordered this one now: https://www.aliexpress.com/snapshot/0.html?orderId=82116420384467&productId=32737224430
Did you end up having any luck with the second motherboard?
Or has anyone else attempted this before?
I'm looking to swap my qc chip for the exynos.
How was the operation??
Hello i'm interested to know how was the experiment becouse i wanna try almost the same thing, i have a s7 sm935fd and i wanna change the motherboard for a sm935f model. Please answer me!
I am also going to try swapping motherboards. How did yours work out?
Hi @totalvamp,
I am going to try swapping out a good motherboard from a banged up sprint G930P phone with a clean IMEI into a clean, whole, G930X demo model that I picked up cheap on Ebay.
The "X" demo phones work on WIFI only. I understand that the "X" motherboards are missing the cellular radios, which is why I am trying this swap -- it should be far easier and less costly than doing a full screen&LCD replacement, which requires tearing down the entire phone, and costs about $150. Hopefullly, I will just have to remove the back, the QI receiver and I think the camera, and I'll get access to the motherboard.
My hope is that all the rest of the parts are present -- we'll see how it goes.
I look forward to hearing from you.
Philip
I have HTC u11 dual sum European varient... It has issue no sound either through hands-free or speaker on call ringtones videos any kind of sound.... I have already tried firmware restore... On custom roms like linage or anyother i can connect bluetooth and get video sounds through bluetooth but on official firmware or official firmware base roms like viper when i connect bluetooth phone will hang and it will restart... Else no sound on phone in any sort of way when i try to play even a ringtone it will show unable to play file error
hassanulhaq said:
I have HTC u11 dual sum European varient... It has issue no sound either through hands-free or speaker on call ringtones videos any kind of sound.... I have already tried firmware restore... On custom roms like linage or anyother i can connect bluetooth and get video sounds through bluetooth but on official firmware or official firmware base roms like viper when i connect bluetooth phone will hang and it will restart... Else no sound on phone in any sort of way when i try to play even a ringtone it will show unable to play file error
Click to expand...
Click to collapse
+1
I just splashed my rear glass and since then there is no sound at all from device... When selecting a ringtone it says "unable to play this file".. and what i noticed is that phone reboot itself when reciving a call... From my point it is a hardware issue, but don't know what could it be...
Any suggestion will be appreciated
Rear glass
krokanic said:
+1
I just splashed my rear glass and since then there is no sound at all from device... When selecting a ringtone it says "unable to play this file".. and what i noticed is that phone reboot itself when reciving a call... From my point it is a hardware issue, but don't know what could it be...
Any suggestion will be appreciated
Click to expand...
Click to collapse
it all started when my rear glass broked and lcd few months back i went to htc warrenty and they replaced the glass and lcd but the strange thing was when they returned the phone it was all wiped out and then after a month or so this happened no sound at all.. i was in dubai and i went to local market to check it they said its some sort of sound ic and its not available... then i was in lahore so i went to local market here too and the same sound ic and its not available.
hassanulhaq said:
it all started when my rear glass broked and lcd few months back i went to htc warrenty and they replaced the glass and lcd but the strange thing was when they returned the phone it was all wiped out and then after a month or so this happened no sound at all.. i was in dubai and i went to local market to check it they said its some sort of sound ic and its not available... then i was in lahore so i went to local market here too and the same sound ic and its not available.
Click to expand...
Click to collapse
That's what i am afraid of ... If this chip is on motherboard than i can forget to get repaired in my country... But if it is on the bottom daudghterboard than maybe replacing entire board will fix the problem
location of chip
krokanic said:
That's what i am afraid of ... If this chip is on motherboard than i can forget to get repaired in my country... But if it is on the bottom daudghterboard than maybe replacing entire board will fix the problem
Click to expand...
Click to collapse
as far i know chip is on main board but can someone point out that?
hassanulhaq said:
as far i know chip is on main board but can someone point out that?
Click to expand...
Click to collapse
The loud speaker and earpiece are seperate components and can be purchased here
"witrigs"
But as far as I know they are both controlled by the MB! Hth.
Speakers earpiece
hammered58 said:
The loud speaker and earpiece are seperate components and can be purchased here
"witrigs"
But as far as I know they are both controlled by the MB! Hth.
Click to expand...
Click to collapse
speakers earpiece are not the problem problem is with motherboard as no sound handsfree either so location of sound ic on main board is required to be point out in other words the problem area.
hassanulhaq said:
speakers earpiece are not the problem problem is with motherboard as no sound handsfree either so location of sound ic on main board is required to be point out in other words the problem area.
Click to expand...
Click to collapse
I can send you a pic of the MB if that would help!!
Sound IC
hammered58 said:
I can send you a pic of the MB if that would help!!
Click to expand...
Click to collapse
thanks but i already took off the back off my cell. problem is i want sound ic location on board which i don't know
Ok i opened my phone, removed the motherboard and trying to locate audio ic chip... Will try to reflow it with heat gun, because in my town nobody is soldering micro chips... Can someone tell me what audio ic chip our u11 has...?
Found it, it is qulacom wcd9340... now i am thinking to search more for someone to replace it or resolder... I think that i can really Easley to blow something else... any advice guys, because if there is 50% chance of success i will carefully try to reflow it...
Updtae: just reflowed but i think i reflowed everything but what i wanted:cyclops: it wont boot and no sings of life at all... Will try to find cheap motherboard, lucky i have my old good htc10
So did you did u found the main motherboard?
Did you took the risk?
krokanic said:
Found it, it is qulacom wcd9340... now i am thinking to search more for someone to replace it or resolder... I think that i can really Easley to blow something else... any advice guys, because if there is 50% chance of success i will carefully try to reflow it...
Updtae: just reflowed but i think i reflowed everything but what i wanted:cyclops: it wont boot and no sings of life at all... Will try to find cheap motherboard, lucky i have my old good htc10
Click to expand...
Click to collapse
Did u solved the problem by taking the risk?
hassanulhaq said:
Did u solved the problem by taking the risk?
Click to expand...
Click to collapse
No, but phone is working as before, with no sound...i just connected it to pc a few days ago and it booted... I found one resistor broken near the audio chip... So i think the chip is good... I will wait if someone broke the screen in my country and sell the phone for 100-150 bucks??
Lolz
krokanic said:
No, but phone is working as before, with no sound...i just connected it to pc a few days ago and it booted... I found one resistor broken near the audio chip... So i think the chip is good... I will wait if someone broke the screen in my country and sell the phone for 100-150 bucks
Click to expand...
Click to collapse
Lolz my issue is i have 6gb ram variant which is hard to find although its current price in pak (fully working) is around 170 bucks.
hassanulhaq said:
Lolz my issue is i have 6gb ram variant which is hard to find although its current price in pak (fully working) is around 170 bucks.
Click to expand...
Click to collapse
Yeah, same situation here but with every htc u11... They are very rare and too expensive, htc not very popular here in the last few years...but dont want to order if i cant get personally to test it deforw buying... I dont need one more u11 with something else broken ?
krokanic said:
Found it, it is qulacom wcd9340... now i am thinking to search more for someone to replace it or resolder... I think that i can really Easley to blow something else... any advice guys, because if there is 50% chance of success i will carefully try to reflow it...
Updtae: just reflowed but i think i reflowed everything but what i wanted:cyclops: it wont boot and no sings of life at all... Will try to find cheap motherboard, lucky i have my old good htc10
Click to expand...
Click to collapse
Hi I'm Fouad and I'm a smartphone repairer
Htc u11 phone in impact broken lcd
I want replacment but I realized mic It also doesn't work and sound for ex play music or movie
I found sound chip qualcomm wcd9340
I found a piece that seems to have been broken and its specifications lost
If you have a motherboard can you help me from the motherboard and give me the details of the broken electronic part next to the chip
I can send photo of my motherboard htc u11
Sir me too with this problem
But i want just videos sound with Bluetooth
Can you help me with any custom ROM
Like lineage or any other i want only videos sound with bluetooh i have 6gb u11 movies lover sir reply me plz
Hi I have a Samsung galaxy A72 SM -A725F/DS
When my phone is locked for a while in my pocket the touch screen becomes unresponsive and have to hard reboot after reboot touch screen works perfectly fine.
My phone is not rooted still original firmware
Some help would be much appreciated
GoldenJet said:
Hi I have a Samsung galaxy A72 SM -A725F/DS
When my phone is locked for a while in my pocket the touch screen becomes unresponsive and have to hard reboot after reboot touch screen works perfectly fine.
My phone is not rooted still original firmware
Some help would be much appreciated
Click to expand...
Click to collapse
Go to system settings>display, see if you have a setting called "Accidental Touch Protection" and if it is enabled. That feature could be activating and then freezing the screen when you try to turn it back on.
Droidriven said:
Go to system settings>display, see if you have a setting called "Accidental Touch Protection" and if it is enabled. That feature could be activating and then freezing the screen when you try to turn it back on.
Click to expand...
Click to collapse
Hi there thanks for the reply I have tried that and still have the same problem maybe unlocking the phone and reinstall software will help I have an idea it could maybe be software related?
GoldenJet said:
Hi there thanks for the reply I have tried that and still have the same problem maybe unlocking the phone and reinstall software will help I have an idea it could maybe be software related?
Click to expand...
Click to collapse
Yeah, that would solve any software issues. If there is still a problem after that, maybe hardware damage?
Droidriven said:
Yeah, that would solve any software issues. If there is still a problem after that, maybe hardware damage?
Click to expand...
Click to collapse
Can't think of hardware damage cause then it will be permanently it only happens sometimes when screen is locked.
Need to know where to download proper and original software?
GoldenJet said:
Can't think of hardware damage cause then it will be permanently it only happens sometimes when screen is locked.
Need to know where to download proper and original software?
Click to expand...
Click to collapse
Google search for:
"Return to stock (your specific model number)"
That should find links to firmware, software tools and guides.
i have the same problem right now a72 can you tell me how you solved the problem?
Duygu13 said:
i have the same problem right now a72 can you tell me how you solved the problem?
Click to expand...
Click to collapse
My device still have the same problem it is sended to technicians I have an idea the main board is faulty will let you know what was the fix
GoldenJet said:
My device still have the same problem it is sended to technicians I have an idea the main board is faulty will let you know what was the fix
Click to expand...
Click to collapse
Hi there! What was the answer or Solution by technicians? Did they solved the problem?
Hi all there! As I see this issue is the same that A52 has. It's a typical factory problem that could be solved charging the main flex. That's the definitive Solution !
I have the same problem with my A72 (A725f)XID
Any solutions
I tried downgrading it didn't help
Changing the screen of flex also doesn't help
So it's a software problem
But any solutions???
I have the same problem. It seems that all A72 series are affected by this problem. The flex cable appears to be problematic. Almost every Samsung product I purchased had issues. So, never again Samsung.
Sorry for late reply for all questions above. My A72 was not even a year old it was sended to numerous shops from Samsung to the cheap Pakistani shops and it is Un repairable they said that there might Me a chance to repair it if I replace the main board but to find one is very scarce and a new one is almost the price of a new device.
To me personally I will never get a Samsung again my next upgrade will be Huawei,Google pixel or a Xiaomi or anything else I do think that the better devices like Samsung galaxy S22,S21FE and Z fold won't have problems like the A72 or A52 or there was just a big bach of manufacturing that went wrong.
But do let me know if you guys got it fixed in any way maybe I can have a try to fix mine then but to replace part for part and hope that it will be fixed is a expensive route to go.
No just make sure your next samsung is from the European or North /South american market
Then you won't have no issues
I use The A53 & A52s 5G now & i don't have problems
GoldenJet said:
Sorry for late reply for all questions above. My A72 was not even a year old it was sended to numerous shops from Samsung to the cheap Pakistani shops and it is Un repairable they said that there might Me a chance to repair it if I replace the main board but to find one is very scarce and a new one is almost the price of a new device.
To me personally I will never get a Samsung again my next upgrade will be Huawei,Google pixel or a Xiaomi or anything else I do think that the better devices like Samsung galaxy S22,S21FE and Z fold won't have problems like the A72 or A52 or there was just a big bach of manufacturing that went wrong.
But do let me know if you guys got it fixed in any way maybe I can have a try to fix mine then but to replace part for part and hope that it will be fixed is a expensive route to go.
Click to expand...
Click to collapse
I ordered a new main flat cable, and it was supposed to be delivered yesterday, but stupid NordPost in Norway did not deliver it in time. So, I must wait until Monday or Tuesday to get it. Basically, my phone has been opened and lying since Wednesday. I will update you, when I replace the cable. In any case, original main cable in Norway is very inexpensive. It cost me 110 nok or 11 euros.
Bigslime96 said:
No just make sure your next samsung is from the European or North /South american market
Then you won't have no issues
I use The A53 & A52s 5G now & i don't have problems
Click to expand...
Click to collapse
My A72 is from Europe. It seems it doesn't matter where it's from. All A72 models are effected with this problem.
drrastovac said:
I ordered a new main flat cable, and it was supposed to be delivered yesterday, but stupid NordPost in Norway did not deliver it in time. So, I must wait until Monday or Tuesday to get it. Basically, my phone has been opened and lying since Wednesday. I will update you, when I replace the cable. In any case, original main cable in Norway is very inexpensive. It cost me 110 nok or 11 euros.
Click to expand...
Click to collapse
You are lucky it is not expensive here in South Africa every thing is expensive if I take a guess it will be around R400, my phone acted actually weird because it started to have unresponsive screen restarted the device then will work for a few seconds then will have the same problem, sometimes my network signal will totally disappear and there will be two round sircles, sometimes when I charge my device it will show the phone is overheating even though the device was not even on for a while other times it will show the charging port is wet I can't think that the flex cable will cause all that problems
GoldenJet said:
You are lucky it is not expensive here in South Africa every thing is expensive if I take a guess it will be around R400, my phone acted actually weird because it started to have unresponsive screen restarted the device then will work for a few seconds then will have the same problem, sometimes my network signal will totally disappear and there will be two round sircles, sometimes when I charge my device it will show the phone is overheating even though the device was not even on for a while other times it will show the charging port is wet I can't think that the flex cable will cause all that problems
Click to expand...
Click to collapse
Same problem i had when charging. Try this fix
I replaced the main flat cable, and so far, my phone is working. I will report again in a few days.
drrastovac said:
I replaced the main flat cable, and so far, my phone is working. I will report again in a few days.
Click to expand...
Click to collapse
That's great news mate let me know in a few days then I will replace mine