Hey guys I've been on Ginger dx and as video problem is fixed on ics, I tried it. I installed 3 roms: icy snap, lastkiss and whitehawk but every time I start using the phone it either stuck and then shut down or show me lg logo and boots up
plz help me!
Possible solutions:
1. Try wiping all data, cache etc and dont forget to format boot also.
2. Try reflashing the rom.
3.Just check whether roms you downloaded are not corrupted.
sarus_b said:
Possible solutions:
1. Try wiping all data, cache etc and dont forget to format boot also.
2. Try reflashing the rom.
3.Just check whether roms you downloaded are not corrupted.
Click to expand...
Click to collapse
I tried them all but none of them worked
The roms are not corrupted because the three of them work on my brother's p500 without any problem
i even tried to install a new clockwork version and new kernels but nothing solved the problem
help me pleeeeeaaaaaaase !
Did you do:
Wipe -> Factory Reset -> Cache -> Dalvik Cache -> System -> SD-EXT?
I can't think of anything that would prevent the ROMS to work except for not deleting everything before installing them.
zeratos said:
Did you do:
Wipe -> Factory Reset -> Cache -> Dalvik Cache -> System -> SD-EXT?
I can't think of anything that would prevent the ROMS to work except for not deleting everything before installing them.
Click to expand...
Click to collapse
I did everything you can ever imagine in recovery but the problem persists
In fact my problem is with ICS roms ( the three ones I mentioned ) but gingerbread roms work perfect !
I'm going mad with this problem and I can't imagine why only ICS roms donn't work properly !
borchaniz said:
or show me lg logo and boots up
Click to expand...
Click to collapse
Boots up to where? More details please.
And, do JB ROMs work fine?
--
P>
Sent from my LG-P500 using xda app-developers app
Try changing ur recovery to amon ra 3.06 .. wipe all/factory reset-> wipe system -> wipe dalvik-> wipe battery stats ...
Flash zip and see what happens
Sent from my LG-P500 using xda app-developers app
Related
Hello,
I have a Milestone XT720 (French version), and 1 SD Card inside with 3 partitions on it. One is FAT, the others are ext-3 for apps and swap.
I have just tried the XT720 MIUI ROM.. but I have boot loop at the MIUI boot animation. I try to clear dalvik, cache, and data and also I try to boot with and without SD card, it is still the same.
Would you please explain me how to solve it?!
Thank you so much!
pineapplejuice said:
Hello,
I have a Milestone XT720 (French version), and 1 SD Card inside with 3 partitions on it. One is FAT, the others are ext-3 for apps and swap.
I have just tried the XT720 MIUI ROM.. but I have boot loop at the MIUI boot animation. I try to clear dalvik, cache, and data and also I try to boot with and without SD card, it is still the same.
Would you please explain me how to solve it?!
Thank you so much!
Click to expand...
Click to collapse
Which rom you were using b4...I had the same problem when I switched over from steelepicblue v4 to miui....clear factory data reset and reboot!
Sent from my XT720 using XDA App
vari9 said:
Which rom you were using b4...I had the same problem when I switched over from steelepicblue v4 to miui....clear factory data reset and reboot!
Sent from my XT720 using XDA App
Click to expand...
Click to collapse
Thank you!!.. Yes, I also use the "steelepicbluev4" before.. I use OR to wipe data/factory reset, but it didn't take effect too.
Is there another way to wipe data/factory reset?! Or should I flash another ROM and then come to MIUI?!
pineapplejuice said:
Thank you!!.. Yes, I also use the "steelepicbluev4" before.. I use OR to wipe data/factory reset, but it didn't take effect too.
Is there another way to wipe data/factory reset?! Or should I flash another ROM and then come to MIUI?!
Click to expand...
Click to collapse
Wipe factory data reset..wipe cach..wipe dalvik cache....it worked for me....but wht I have seen and experianced....apps2sd wont work wen u switch from steelepic blue v4..……so...don't switch!
Sent from my XT720 using XDA App
Solution
Actually, Wiping Cache & Dalvik won't help for everyone, I tried the same thing, all you have to do is re-flash your old ROM, then check if the MIUI ROM has any Faults & bugs, if not, try reflashing the MIUI ROM!
Good Luck!
I've been tinkering with androids for well over a year now and have rooted unlocked and s-off'ed amongst other things many different devices. For some reason I'm having trouble flashing kernels to my s3. Yes I'm unlocked and yes I'm flashing aosp kernels to aosp roms and touchwiz kernels to touchwiz roms. The problem seems most persistent on aosp roms and yes I've also checked that they both had the same cm10 commits. The only kernel I could get to boot was clean kernel on beans custom. Other than that no other kernels will work. The device will boot then the screen will start glitching up and then eventually bootloop. I've also made sure to wipe dalvik and cache plus fix permissions. I've also tried just flashing the kernel after doing a full wipe and starting with a new rom and have root 66ed back to stock and re unlocked. Is there something I'm missing here? I'm getting frustrated as I love custom kernels. Oh and the latest combo I tried was liquid smooth rc3 and lean kernel 1.0. Thanks guys.
Sent from my SCH-I535 using xda app-developers app
did you try wiping cach, davik cach, and fix permissions AFTER flashing then reboot?
Ofc wipe cach and dalvik cache before also.
My usual process goes something like this
*Wipe Cache
*Wipe Dalvik
*Flash Kernel
*Wipe Cache & Dalvik again
*Fix Permissions
Works like a charm every time.
Samsung Galaxy S3
i have had the same trouble once...fixed it by flashing back to a stock kernel first.
try this:
wipe cache & dalvik
flash stock kernel.zip- http://db.tt/ceeDTAfz
flash custom kernel
reboot
Is that the stock cm10 kernel or touchwiz? Also yes I've tried wiping before and after and fixing permissions. So weird and its driving me nuts. I miss having awesome battery life
Sent from my SCH-I535 using xda developers app
sumredhed567 said:
Is that the stock cm10 kernel or touchwiz? Also yes I've tried wiping before and after and fixing permissions. So weird and its driving me nuts. I miss having awesome battery life
Sent from my SCH-I535 using xda developers app
Click to expand...
Click to collapse
stock kernel = stock TW kernel
Sent from my SCH-I535 using xda app-developers app
Tried flashing the stock kernel still same thing. It's so weird. It will begin to boot and then boot animation will start flickering or flashing then glitch up. With every kernel it's the same result.
Sent from my SCH-I535 using xda app-developers app
sumredhed567 said:
Tried flashing the stock kernel still same thing. It's so weird. It will begin to boot and then boot animation will start flickering or flashing then glitch up. With every kernel it's the same result.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
another thing you might try is formatting system in cwm.
droidstyle said:
another thing you might try is formatting system in cwm.
Click to expand...
Click to collapse
I've tried that a few times when doing a fresh rom install. I mean root66ing through odin should completely wipe everything. I just don't see what I'm missing. I've even tried using a different recovery and still the same. Could it just be something specific to my phone? I'm so freaking stumped!!
sumredhed567 said:
I've tried that a few times when doing a fresh rom install. I mean root66ing through odin should completely wipe everything. I just don't see what I'm missing. I've even tried using a different recovery and still the same. Could it just be something specific to my phone? I'm so freaking stumped!!
Click to expand...
Click to collapse
now when you odin back to stock, your booting into stock recovery after flashing the rom(root66) and doing a data wipe/factory reset correct? you said full wipe, but just want to be clear. it may be corrupted internal memory and might need to be reformatted.
I actually don't think I was wiping after I used Odin. I'll try that as soon as I get home. Though I have done plenty of factory data resets and system wipes, just not right after I odined. And you mentioned formatting how would I go about doing that?
Sent from my SCH-I535 using xda app-developers app
sumredhed567 said:
I actually don't think I was wiping after I used Odin. I'll try that as soon as I get home. Though I have done plenty of factory data resets and system wipes, just not right after I odined. And you mentioned formatting how would I go about doing that?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
follow section 6 of my guide...link in sig!
Always perform a full/mega wipe as:
1) Wipe data/factory reset
2) Wipe cache partition
3) Wipe dalvik cache
4) In mounts/storage section wipe /system
5) wipe /data
6) wipe /cache
7) wipe /preload
Then flash new ROM.
For flashing a kernel, please perform steps 2 and 3.
ok i will start by saying i have searched everything in forums and could not find this problem
my goal is to install CM 10.1 i have followed the official guide on the forums but after it is installed it boots to image that shows CM booting but it takes about 10 min before it just resets and continues this cycle and only way to fix is to do stock firmware via odin after which it works fine i can even flash via CWM but only official firmware will work without this problem can someone help me with this if more info is needed plz tell me i am rather new to forums
Are you wiping everything before you flash?
Sent from my SAMSUNG-SGH-I727 using xda premium
spitfire2425 said:
Are you wiping everything before you flash?
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
yes i have wiped cache and dalvik and system
crashburn833 said:
ok i will start by saying i have searched everything in forums and could not find this problem
my goal is to install CM 10.1 i have followed the official guide on the forums but after it is installed it boots to image that shows CM booting but it takes about 10 min before it just resets and continues this cycle and only way to fix is to do stock firmware via odin after which it works fine i can even flash via CWM but only official firmware will work without this problem can someone help me with this if more info is needed plz tell me i am rather new to forums
Click to expand...
Click to collapse
Did you check MD5 before flashing? Could be a bad download.
Usually boot loop issues are due to left overs from your previous rom so,
If you're on CWM recovery , use this ORDER :
1.Reset user data/factory reset
2.Format System
3.Format Data
4.Format Cache
5.Format SD card (back up your important files first)..
Then flash the rom ... Don't wipe dalvik it's already in /data
This applies not just to CM10 , use this procedure to any rom flash or any nandroid restore ...
mahanddeem said:
Usually boot loop issues are due to left overs from your previous rom so,
If you're on CWM recovery , use this ORDER :
1.Reset user data/factory reset
2.Format System
3.Format Data
4.Format Cache
5.Format SD card (back up your important files first)..
Then flash the rom ... Don't wipe dalvik it's already in /data
This applies not just to CM10 , use this procedure to any rom flash or any nandroid restore ...
Click to expand...
Click to collapse
still did not work
You don't have to wipe sdcard
Sent from my SGH-I727 using xda premium
crashburn833 said:
still did not work
Click to expand...
Click to collapse
In such case,you have a problem somewhere else...Redownload the rom check its md5 and try again...Make sure you're downloading the correct rom for your device...
Hi,
I have AT&T Motorola Atrix 2 MB-865 , i was on official ICS after root unlock I flushed pa_edison-3.69-20130729-nokex.zip rom to my atrix 2, using http://forum.xda-developers.com/showthread.php?t=2050705
i did factory reset, data format system, format cache and etc before flushing that ROM after successful flush , I rebooted , after reboot it keep stuck (does't not hang just stuck) on paranoid boot screen, i tried to flush again but same result in addition i want to say i flushed only rom , no gapps, , now i am again on ics_edison using RDS Lite ,Please any one tell me where i am wrong
Thanks in advance.
cheeta123 said:
Hi,
I have AT&T Motorola Atrix 2 MB-865 , i was on official ICS after root unlock I flushed pa_edison-3.69-20130729-nokex.zip rom to my atrix 2, using http://forum.xda-developers.com/showthread.php?t=2050705
i did factory reset, data format system, format cache and etc before flushing that ROM after successful flush , I rebooted , after reboot it keep stuck (does't not hang just stuck) on paranoid boot screen, i tried to flush again but same result in addition i want to say i flushed only rom , no gapps, , now i am again on ics_edison using RDS Lite ,Please any one tell me where i am wrong
Thanks in advance.
Click to expand...
Click to collapse
Firstly its FLASH not FLUSH.!! On which system did you flash the ROM.. If you have flashed on 2nd system you should not wipe data... It will wipe out your other partitions... And did you flash via bmm or cwm??
Sent from my MB865 using XDA Premium HD app
nikhJ said:
Firstly its FLASH not FLUSH.!! On which system did you flash the ROM.. If you have flashed on 2nd system you should not wipe data... It will wipe out your other partitions... And did you flash via bmm or cwm??
Sent from my MB865 using XDA Premium HD app
Click to expand...
Click to collapse
he's is in a habit of writing 'flush' in place of 'flash' (see his other posts)
sent from my A2 running ÑÜMÅ3.0
$ÇÏÊÑÇÈ is the only TRUTH
Re
nikhJ said:
Firstly its FLASH not FLUSH.!! On which system did you flash the ROM.. If you have flashed on 2nd system you should not wipe data... It will wipe out your other partitions... And did you flash via bmm or cwm??
Sent from my MB865 using XDA Premium HD app
Click to expand...
Click to collapse
I used Atrix2BootStrap.apk which seem like CWM based, there was no option 1st system or second system, it was like standard flashing(means normally we flash using Clock world recovery so no 1s or seccond system option appeared).
cheeta123 said:
I used Atrix2BootStrap.apk which seem like CWM based, there was no option 1st system or second system, it was like standard flashing(means normally we flash using Clock world recovery so no 1s or seccond system option appeared).
Click to expand...
Click to collapse
i think this rom can be install via BMM only... my friend has do like what you do before..... the only you can do is FXZ to stock,root,and then go to play store, install BMM 0.3..... dont install bootstrap.apk again after installing BMM and you will be fine...
I seem to have a similar issue.
First of all although this is my first post on XDA I'm not new to flashing and using Custom Roms infact I have been using CM 10.1 versions switching back and forth between 4.1.2 when I run into trouble.
I decided to give PA a shot and seem to have run into a wall. I flashed PA nokex on system 3 (which previously had CM10.1 - JBX 0.8.1(kernel)).
Before flashing PA on it I destroyed and recreated system, data and cache partitions so I didn't see the need to do wipes on them again. Nevertheless I did dod wipes. Flashed PA nokex, Gapps, wiped dlavik cache and rebooted. (Using BMM ofcourse)
I am stuck at a black screen with the red LED. I would really like to sample PA so any help would be really appreciated.
blazebud350 said:
I seem to have a similar issue.
First of all although this is my first post on XDA I'm not new to flashing and using Custom Roms infact I have been using CM 10.1 versions switching back and forth between 4.1.2 when I run into trouble.
I decided to give PA a shot and seem to have run into a wall. I flashed PA nokex on system 3 (which previously had CM10.1 - JBX 0.8.1(kernel)).
Before flashing PA on it I destroyed and recreated system, data and cache partitions so I didn't see the need to do wipes on them again. Nevertheless I did dod wipes. Flashed PA nokex, Gapps, wiped dlavik cache and rebooted. (Using BMM ofcourse)
I am stuck at a black screen with the red LED. I would really like to sample PA so any help would be really appreciated.
Click to expand...
Click to collapse
i think PA non kexec is for ICS base only!
¢@®bøÑ///JBX
Super_Commando said:
i think PA non kexec is for ICS base only!
¢@®bøÑ///JBX
Click to expand...
Click to collapse
Yeah. I flashed the kexec version and it booted up fine... Thank you.
everytime i turn on my i9003,every apps ive installed including gapps force close.i ve tried restocking it but the apps that i have installed cant be deleted,even after ddlf2 restock.i tried to install cwm and flash cm11 but cm11 wont boot.in cwm recovery itshows E:Failed to mount/cache/recovery/last_log.......please can somebody help me figure this out
try this...
N I C K said:
everytime i turn on my i9003,every apps ive installed including gapps force close.i ve tried restocking it but the apps that i have installed cant be deleted,even after ddlf2 restock.i tried to install cwm and flash cm11 but cm11 wont boot.in cwm recovery itshows E:Failed to mount/cache/recovery/last_log.......please can somebody help me figure this out
Click to expand...
Click to collapse
okay... if this is what i think u did... then i have a solution .. if u were on any custom rom previously and flashed a stock rom using odin.. just check if u have apps that were installed on custom rom and still have them on your device... then just boot into recovery ... do factory /data reset and also clear cache partion and dalvic cache. n check if the proplem is solved.. DONT clear system partition..
click thanx if helped
swapnilpx said:
okay... if this is what i think u did... then i have a solution .. if u were on any custom rom previously and flashed a stock rom using odin.. just check if u have apps that were installed on custom rom and still have them on your device... then just boot into recovery ... do factory /data reset and also clear cache partion and dalvic cache. n check if the proplem is solved.. DONT clear system partition..
click thanx if helped
Click to expand...
Click to collapse
wipe data didnt work,apps keep showing when i boot to system
N I C K said:
wipe data didnt work,apps keep showing when i boot to system
Click to expand...
Click to collapse
Flash FULL firmware with pit (lf2,kpe) this will repartition and wipe everything.
Sent from Mallorca to your face
Acuicultor:
Impressive knowledge (as usual).
Cant count the stuff ive been learning with you.
Sent from my E310 using XDA Free mobile app