CWM 6 Based Recovery For Micromax A45 Punk
First of all, you agree that you are doing this in your responsibility, be careful how you use this recovery. If anything goes wrong it's your own fault.
Instructions:
1. Enable USB Debugging by going to Menu -> Settings -> Applications -> Development - Enable USB Debugging.
2. Download the CWM Recovery file + scatter file recovery file download and scatter file from attachment
3.here is tutorial how to flash cwm recovery on mmx a45 using sp flash tool
http://droidpunk.wordpress.com/2012/10/02/how-to-use-sp-flash-tools-for-mmx-a45-3/
4. download all mtk drivers from this post
http://forum.xda-developers.com/showthread.php?t=1684690
5. Switch off your phone.Then boot into recovery mode, you should be familiar if you have rooted your phone. If not, then hold Volume up button + Volume down button + Power button simulatenously.
6.After you boot int Recovery, you can only use buttons to move. For up/down use volume up/down, to do a selection you press the Search button.
LINK OF CWM 6
http://db.tt/5DJIvdiT
New LINK OF COD Recovery
Latest Update
New Tutorial Added In Attachment
NOTE 1- put scatter file and recovery files in same folder
NOTE 2- If sp tool not work then flash via mobileuncle.apk from attachment
credit goes to I me and Master Shifu bgcngm sharing his unpack/ repack scripts and others devs
Point taken, lesson learned
All's Well, Ends Well
Cheers...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
yuweng said:
Point taken, lesson learned
All's Well, Ends Well
Cheers...
Click to expand...
Click to collapse
i like your signature pic
Yeoh Bro, Haha, you are most welcome to use it... :laugh:
i have been commented that it is too annoying so i advice you to do the same & use below command at your signature....
PHP:
[hide]
your signature content
[/hide]
This way, it will not be annoying & at the same time it will be easy for users to look for your thread link at your signature... :good:
yuweng said:
Yeoh Bro, Haha, you are most welcome to use it... :laugh:
i have been commented that it is too annoying so i advice you to do the same & use below command at your signature....
PHP:
[hide]
your signature content
[/hide]
This way, it will not be annoying & at the same time it will be easy for users to look for your thread link at your signature... :good:
Click to expand...
Click to collapse
thanks sir without your script today i am nothing
Related
This thread is dedicated to all discussion regarding CELKON A27 feel free to ask and answer and post anything related... don't worry we guys are here..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Specs :
https://www.celkonmobiles.com/?_a=mobilespecifications&pid=83&sid=1
ROOTING GUIDE :
1. Download the updated version from here http://forum.xda-developers.com/showthread.php?t=1886460
or check attachments at the end.
2. Extract it
3. Open runme.bat file or any .bat file in the folder.
4. select 1.
5. it tells what to do. (select restore from right corner on ur phone screen).
6. it reboots twice.
Now ur phone is rooted.
TUT Regarding Installing Drivers :
http://forum.xda-developers.com/showthread.php?t=2206421
Using SP TOOL :
http://forum.xda-developers.com/showthread.php?t=1982587
CUSTOM RECOVERY ::
CLOCKWORKMOD & TWRP-TOUCH Recovery
here u can install mods, patches, roms or any updates
or rom backup/restore,etc.
for recovery installation
after rooting ur phone
1. install mobile uncle tools[DO NOT UPDATE] download link attached.
2. download the recovery.img from the below attachments.
3. place it in root of sd-card.
4. open mutools, grant superuser permissions.
5. click on recovery update.
6. select recovery.img from ur sdcard.
7. now click reboot to recovery.
now recovery is installed.
Credits :
YUWENG for recovery porting guide.
Russian Master Shifu JavumJavumJavumJavum for continuously re-submitting error correction commits to TWRP: XDA Recognized Developer Varun.Chitre15Varun.Chitre15Varun.Chitre15Varun.Chitre15 for compiling TWRP V2.4.2.0: Russian Master Shifu MichfoodMichfoodMichfoodMichfood for Repack Utils for Win OS: TWRP Team
ROMS :
Stock ROM:[CWM backup]
in-case for warranty or brick use this......
1. download the file http://d-h.st/tEJ
2. extract clockworkmod folder it to root of sd card.
3. reboot to recovery-
switch off -> powerbutton + vol- button.
4. wipe cache/dalvik. and data(optional)
go to backup and restore
5. click restore select this backup and select yes......
Galaxy S4 styled rom:
coming soon.......
I Will Update thread if i found any useful sharing... PM me if you want anything to be added.... Lets start development
[/SIZE][/FONT]
reserved
Root your android with unlocked bootloader via stock recovery easily.
Working from eclair to jellybean.
HOW TO:-
1.)Download file BELOW.
2.)Place update.zip in / folder (main folder) of your Internel Sd card.
3.)Switch off phone and boot in Recovery (you should know how to).
[Power on + volume up +volume down for micromax canvas phones.]
4.)Choose option to
Apply update.zip from sdcard.
To change options, press volume up and down.
To select any option, press power buttons .
5.)Let it complete.
A yellow line will appear and thean a message will come "Installation complete"
DOWNLOADS:-
How to unroot:-
1.)Download this file and place in sdcard.
2.)Flash via recovery like you rooted.
Flash recovery in mediatek devices
How to flash recovery on mediatek devices:-
1.)Download the Recovery meant for your device.
2.)Rename it to recovery.img(or whatever) and transfer it to your sdcard.
3.)Download MobileUncle MTK Tools from play store.
4.)Select the option "Recovery Update" from the app, and then when it ask for path, guide it to where you transferred the file to your sdcard.
5.)Your phone will reboot into recovery. Congrats.
6.)You can boot into the recovery at any time by switching off your mobile, and then pressing and holding volume down, volume up and power button till the screen lights up. From there you will have the option to go the the recovery mode.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OR
Credits= http://www.droidiser.com/2012/11/clockworkmod-port-micromax-a110-how-to.html
r32222222
2222222222222222
How to use boot in recovery mode?
There is no zip file for download?
Shambumon555 said:
How to use boot in recovery mode?
There is no zip file for download?
Click to expand...
Click to collapse
I guess you need to flash a CWM / TWRP recovery using SP Flash tool.
Correct me if i am wrong.
Shambumon555 said:
How to use boot in recovery mode?
There is no zip file for download?
Click to expand...
Click to collapse
Check again, its there to download. btw, use power button+volume up+volume down
eagledipesh said:
I guess you need to flash a CWM / TWRP recovery using SP Flash tool.
Correct me if i am wrong.
Click to expand...
Click to collapse
method given in post no.2 can also be used.
Please help me to root Intex Aqua Wonder2 ....
Sent from my Spice Mi-425 using xda app-developers app
I have made ClockWorkMod Recovery with help of MTK Droid Tool.
ClockworkMod Recovery for Karbonn Ta-Fone A37 MT6577 Download
Installation :-
0.Root you A37 with Framaroot
1.Download the CWM recovery ^^^ and put in Sdcard [any internal or Ext.]
2.Download Mobileuncle MTK Tools and Install.
3.In app go to Update Recovery.
4.Select Recovery Img.
5.Update it .It will take some time.
6.After it will Automatically boot in Recovery or In app go to Reboot recovery.
7.Done !!! Enjoy!!! Happy Flashing!!!
Credits :-
ThunderSky7 for porting.
SBL777 aka Sharad for his TA-Fone A37.
rua1 for MTK Droid Tool.
Screenshots :-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you like my work then press thanks button.
I tried to install this on my Ta-Fone A37 HD and when i booted into the recovery mod... all I could see was white lines and and overall glitchy look of a bricked recovery. This IMG has bricked my reocvery. The device is working fine though. Could you please upload the stock recovery for the tab?
D4mR said:
I tried to install this on my Ta-Fone A37 HD and when i booted into the recovery mod... all I could see was white lines and and overall glitchy look of a bricked recovery. This IMG has bricked my reocvery. The device is working fine though. Could you please upload the stock recovery for the tab?
Click to expand...
Click to collapse
1. CWM recovery img is working fine.
2. You can try flashing Recovery via Flashify or other img flashing softwares.
3. If then also It's not working for you then make CWM by using MTKdroid tool here" {It's Really Easy.:good:}
4. And here's the Stock Recovery for A37-HD
ThunderSky7 said:
1. CWM recovery img is working fine.
2. You can try flashing Recovery via Flashify or other img flashing softwares.
3. If then also It's not working for you then make CWM by using MTKdroid tool here" {It's Really Easy.:good:}
4. And here's the Stock Recovery for A37-HD
Click to expand...
Click to collapse
Thanks!:good:
HTML:
Behold the TWRP for Karbonn Titanium S20
You may also like:
Sony xperia e4 rom For Karbonn Titanium S20
Note:
# Strictly NO MIRRORSare allowed!
# DONOT share this Content on any site if you want to share, share the link instead. The People here works hard to make something. So please respect that and donot steal.
# I or anybody else will not be responsible for any kind of brick!
Bugs:
Tell me if any other bug comes around!
How it looks...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Before Downloading....
WARNING: This recovery is meant only for KARBONN TITANIUM S20
Download Via Dev-host- recovery.img
How to flash
Method 1 (for rooted mobile)
1. Check via your Android's google playstore if Mobileuncle is available for your device or Play Store
2. Rename the file as recovery.img (already renamed)
and put it at the root of your internal storage (if rooted phone) or the root of your removeable storage
3. Now run mobileuncles
4. Grant superuser
5. and click on update recovery
it will find your recovery.img and you then choose it
it asks for reboot into recovery
6. click ok
now you are in twrp
this does not need any flashtool......
Method 2: [sp flash tool]
Credits:
Sky Hunt
Development Blog: http://karbonnts20.blogspot.in/
Use SP Flasher v 5.0xx to flash Dev-host
Download the scatter file MT6582 Dev-host
Choose the scatter file in SP flasher now
choose the recovery.img and boot.img Dev-host and select Download only. or Simply Recovery.img
Hit Download
Then Turn OFF your phone and connect the device in turn off mode while the battery inside
Let the drivers detect the VCOM port .Therefore be patient and wait
For Custom ROMS & Partitioning Internal Memory
Visit Development blog :
http://karbonnts20.blogspot.in/
Code:
[CENTER][SIZE=6][COLOR=Blue]-:Changelog:-[/COLOR][/SIZE][/CENTER]
Initial Realease - [24 March at 01:11]
- Version v2.8.1.0
- Incorrect Resolution.[FIXED!!]
Update2 - [2015-03-25 17:02:26]
-Version v2.8.1.0
- ADB.[FIXED!!]
If you face any kind of errors
Contact me @
Facebook
HTML:
<!-- Facebook Badge START -->Kavin<span style="font-family: 'lucida grande',tahoma,verdana,arial,sans-serif;font-size: 11px;line-height: 16px;font-variant: normal;font-style: normal;font-weight: normal;color: #555555;text-decoration: none;"> | </span>Create your badge<br /><img class="img" src="https://badge.facebook.com/badge/100002507323443.1756.1733698357.png" style="border: 0px;" alt="" /><!-- Facebook Badge END -->
________________________
Dont Say Thanks Press The BUTTON!!
Link is broken
can you send me a working link in my gmail [email protected] com
Team Win Recovery Project MICROMAX KNIGHT 2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WHAT IS TWRP?
Oh come on, you know what it is - don't try to fool me!
In case you're serious, though...
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
HOW TO INSTALL
U need a Rooted Device to install this recovery..
Download Recovery From here http://www.mediafire.com/file/05e9vcaf776ljd3/sd.img
1. Boot your Device in fastboot mode and connect to PC.
2. Using fastboot boot sd.img command temporarily boot into twrp.
3. flash this SU zip file https://download.chainfire.eu/969/Su...0630161323.zip
4. Your Device is now rooted. Boot the device.
5. Copy The recovery in your phone.
6. Download flashify and open it. It will ask you for root permission, give it that so flashify can do it's process.
7. Select recovery option and find your sd.img from your explorer.
8. Now just flash it and wait till a dialogue box appears with REBOOT option.
9. Now just reboot your device in twrp recovery and enjoy.
CREDITS..
OFFICIAL TWRP TEAM
Suraj_B for porting it.
Raush for a lot of help
Nikhil( ME ) For writing the thread..
Write below if u have any Query
Don't forget to hit like button
Reserved
Hii Bro small Help pls create micromax q4001 twrp recovery file
Pls bro create this file
Suresh8428 said:
Hii Bro small Help pls create micromax q4001 twrp recovery file
Pls bro create this file
Click to expand...
Click to collapse
Ok i will try, expect to see it if i can make it, for now, the best thing to do is dm me on xda and tele