I want to use twrp and i already have yannou's recovery installed.Should i've to flash with twrp............ PLease provide detailed solution.
Download the ZIP from this thread: http://forum.xda-developers.com/showthread.php?t=1911242
Extract the ZIP. Start phone in fastboot mode, run "Install TWRP.bat" (assuming you are on Windows; if on Linux/Mac, simply get the fastboot binary for your system and type "./fastboot flash recovery recovery.img" in a terminal)
There is a simple way to install any recovery. Just download recovery installer from playstore and install recovery through it. Its working fine
Sent from my HTC Explorer A310e using xda premium
Related
it's empty i try to flash clockworkmod and original version
I can't root
The recovery is not sticking, which is pretty common with alot of us. Simply go into CWM and flash the latest recovery and then reboot. Your recovery will work then (atleast for that time)
a) use adb to flash the cwm recovery (fastboot flash recovery recoveryimagename.img)
b) start recovery on device
c) root via flashing superuser zip
d) reboot phone
e) download a file explorer capable of read and write operations (eg SuperManager)
f) start file explorer and set read/write enabled
g) rename install-recovery.sh (eg to install-recovery-old.sh) in /system/etc folder
h) flash cwm recovery again using adb (basically repeat a))
Now your recovery won't be deleted after a reboot.
Hello , i have flashed CWM Recovery. Now i want to replace that with TWRP. How to do that ? Help ??
2 ways:
- Download a TWRP flashable .zip. While in recovery, wipe cache. Then flash .zip. Then go to "advanced options" in CWM and choose "reboot recovery"
- Download a TWRP recovery.img, and flash it through fastboot. Make sure you have fastboot and adb drivers. Connect phone to pc in fastboot mode. Open a CMD window from where you have your adb and fastboot files, as well as the recovery.img file. In the cmd window type "fastboot flash recovery _______.img" Where the blank spot is, is where you would put the name of your recovery .img file.
Hi,
Third way (Rooted Moto G)
Download TWRP Manager from Google Play and do installation of recovery with...worked perfectly for me
Keep in mind that CWM nandroid backups and TWRP backups aren't interchangeable.
OK
Simply download the twrp and flash it using the instructions on the developer's thread.
It will replace automatically.
Hello guys!
Here is a little (but useful) tutorial by me.
Lets start!
You will need a PC with ADB and fastboot drivers.
As I own a Pico,I installed HTC Android Phone USB drivers.
First recovery that I flashed was Yannous CWM recovery.
It was good but I found better one. Thats PhilZ CWM Touch 5 recovery. It is for advanced users.
Download this file: http://forum.xda-developers.com/attachment.php?attachmentid=913094&d=1329843100
Extract it on your desktop.
Next: Download the recovery you want. This is the link for PhilZ CWM that I use. http://d-h.st/jg9
Extract the recovery file and find recovery.img
Replace that recovery.img with the one in A310E folder.
Now connect your HTC Pico via USB and enter FASTBOOTmode.
Open the CMD founded in A310E folder
Write this in CMD----- fastboot flash recovery recovery.img
Make sure your recovery is named "recovery.img" (without punctations)
Wait until its over and reboot the bootloader.
Enter the recovery mode and flash this (no need of wiping,this will wipe all) http://forum.xda-developers.com/attachment.php?attachmentid=2693524&d=1397802687
After that,flash desired ROM.
Thanks for reading!!!
Arnel Babić said:
Hello guys!
Here is a little (but useful) tutorial by me.
Lets start!
You will need a PC with ADB and fastboot drivers.
As I own a Pico,I installed HTC Android Phone USB drivers.
First recovery that I flashed was Yannous CWM recovery.
It was good but I found better one. Thats PhilZ CWM Touch 5 recovery. It is for advanced users.
Download this file: http://forum.xda-developers.com/attachment.php?attachmentid=913094&d=1329843100
Extract it on your desktop.
Next: Download the recovery you want. This is the link for PhilZ CWM that I use. http://d-h.st/jg9
Extract the recovery file and find recovery.img
Replace that recovery.img with the one in A310E folder.
Now connect your HTC Pico via USB and enter FASTBOOTmode.
Open the CMD founded in A310E folder
Write this in CMD----- fastboot flash recovery recovery.img
Make sure your recovery is named "recovery.img" (without punctations)
Wait until its over and reboot the bootloader.
Enter the recovery mode and flash this (no need of wiping,this will wipe all) http://forum.xda-developers.com/attachment.php?attachmentid=2693524&d=1397802687
After that,flash desired ROM.
Thanks for reading!!!
Click to expand...
Click to collapse
Thanks a lots
Problem solved for me.
Worked
Great tutorial, Thanks.
HEY FOLKS,
This THREAD will GUIDE you to flash recovery.img from PHONE.
I found many of the people found difficult to flash recovery via FASTBOOT and TERMINAL EMULATOR by using CODES.
Here is a SIMPLE method to flash recovery from phone through app.
STEPS:
1) Download recovery flasher utility.apk
download link
2) install the recovery flasher utility.apk file.
3) download your preferred recovery.img
4) copy the downloaded recovery.img file to sd-card and place it in ROOT of your sd-card (Don't keep the file inside any folder because the app may not recognize the file)
5) rename the downloaded recovery.img file as recovery.img(all in lower case)
6) Open the app and flash the recovery by pressing the "install recovery" button (Please be patient, wait for the complete flash, wait till you get the display "reboot into recovery")
7) done!!! :good: enjoy your new recovery.:victory:
(note: this method worked very well for me, app flashed recovery within 2sec, and i am not responsible if it wont work for you or anything is messed up.)
:victory: hit :good: if this guide was helpful. :highfive:
.apk to flash recovery
Is there any way to find the success of flashing ?
cvpillai said:
Is there any way to find the success of flashing ?
Click to expand...
Click to collapse
yes mate, after flashing through app, the app will show reboot into recovery. after that just boot into recovery(manually).
hit thanks if i helped :highfive:
does it work on all rooted mobiles
aashking said:
HEY FOLKS,
This THREAD will GUIDE you to flash recovery.img from PHONE.
I found many of the people found difficult to flash recovery via FASTBOOT and TERMINAL EMULATOR by using CODES.
Here is a SIMPLE method to flash recovery from phone through app.
STEPS:
1) Download recovery flasher utility.apk
download link
2) install the recovery flasher utility.apk file.
3) download your preferred recovery.img
4) copy the downloaded recovery.img file to sd-card and place it in ROOT of your sd-card (Don't keep the file inside any folder because the app may not recognize the file)
5) rename the downloaded recovery.img file as recovery.img(all in lower case)
6) Open the app and flash the recovery by pressing the "install recovery" button (Please be patient, wait for the complete flash, wait till you get the display "reboot into recovery")
7) done!!! :good: enjoy your new recovery.:victory:
(note: this method worked very well for me, app flashed recovery within 2sec, and i am not responsible if it wont work for you or anything is messed up.)
:victory: hit :good: if this guide was helpful. :highfive:
Click to expand...
Click to collapse
abhi1607 said:
Click to expand...
Click to collapse
Hopefully it should work in all rooted devices
Hit thanks if i helped :good:
Hey Xda brothers
..................................................................................................................................................................................................
This step by step guide will let you install recovery on your Canvas A104 {Fire 2}
There are lots of method for installing a recovery but it is the easiest one.
You can install all available recoveries for canvas A104 with this method.
A custom recovery allows you to flash custom roms ,files etc...
Requirements:
1. A rooted phone.
2. A Custom recovery
Link for all recoveries
https://drive.google.com/folderview...hnQzJUM3ItbnRSZXFqN3BqQm16czY2ejA&usp=sharing
3. Rashr and ES file explorer. {You can also use Flashify ]
Steps:
1. First of all download a recovery and paste it anywhere on your SD card.
2. Open the ES file explorer and extract the recovery.img from the downloaded zip file.
3. Now install Rashr and grant Root access.
4. You will see an option in the list saying
" Recovery from storage "
5. Click on that.
5. Now browse to the extracted recovery.img and click on yes please.
6. After that click on yes please again.
7. The recovery will be flashed and you will be booted into recovery mode.
8. WHoa!