Database Info

Nexus S 4G Root issues?

I've been playing around with a Nexus S 4G that I have lying around and never used, and I've ran into a few problems, but you've all been helpful. I rooted all my old EVO 4G's without any problem, but the other day I rooted my NS4G using a one click/simple root and downloaded ClockWorkMod etc. But now for some reason It seems like I've almost lost my root? Is that possible? I still have the little unlocked symbol when booting up.
I've searched this forum and Google and haven't found anything, which could possibly be because I don't know what to look for. I've never had this happen :/
Currently running the stock 2.3.7

Nobody? I just need a little help.

Did you flash a superuser.zip after you installed clockworkmod?

SeeNah said:
Did you flash a superuser.zip after you installed clockworkmod?
Click to expand...
Click to collapse
I thought I had... But no lol
Thank you. Sorry for pretty much making a useless thread :/

Its the Q&A forum ask away! Lol
Did flashing it work for you though?

SeeNah said:
Its the Q&A forum ask away! Lol
Did flashing it work for you though?
Click to expand...
Click to collapse
Yes, it did. Thank you!
Now I just need to re figure out how to backup my stock rom on rom manager. I need to do that if I'm going to flash a custom rom onto my NS4G correct? I've never actually gone that far with my phones lol.

Slap-Yourself :) said:
Yes, it did. Thank you!
Now I just need to re figure out how to backup my stock rom on rom manager. I need to do that if I'm going to flash a custom rom onto my NS4G correct? I've never actually gone that far with my phones lol.
Click to expand...
Click to collapse
Okay lol hold on so just go make sure you
1. Unlocked the bootloader right?
2. Flashed a custom recovery (clockworkmod)?
3. Flashed superuser for root access?
4. Now you have a stock rooted ROM?
If you have/did all that then yeah you could backup your stock rooted ROM, you don't need to back it up but its helpful just incase you mess something you could always restore it to start all over
And you could backup any ROM you install incase you didn't know, just remember when you install different ROMS make sure to do a proper full wipe which includes data/factory reset/wiping DALVIK cache, and formatting system and boot in the "mount" option in CWM. And now I think your good lol

SeeNah said:
Okay lol hold on so just go make sure you
1. Unlocked the bootloader right?
2. Flashed a custom recovery (clockworkmod)?
3. Flashed superuser for root access?
4. Now you have a stock rooted ROM?
If you have/did all that then yeah you could backup your stock rooted ROM, you don't need to back it up but its helpful just incase you mess something you could always restore it to start all over
And you could backup any ROM you install incase you didn't know, just remember when you install different ROMS make sure to do a proper full wipe which includes data/factory reset/wiping DALVIK cache, and formatting system and boot in the "mount" option in CWM. And now I think your good lol
Click to expand...
Click to collapse
Unlocked Bootloader? If I boot in fastboot it says Unlocked. Is this what you mean?
I have ClockWorkMod, but I haven't done anything with it.
I have superuser from the root
and I was working with a stock ROM the whole time....
I think I'm ok lol
So I'll back up my ROM, and flash a Nightly CM9? And back that up as well? Just perform a factory data reset before doing so, right?

Slap-Yourself :) said:
Unlocked Bootloader? If I boot in fastboot it says Unlocked. Is this what you mean?
I have ClockWorkMod, but I haven't done anything with it.
I have superuser from the root
and I was working with a stock ROM the whole time....
I think I'm ok lol
So I'll back up my ROM, and flash a Nightly CM9? And back that up as well? Just perform a factory data reset before doing so, right?
Click to expand...
Click to collapse
Yeah if it says unlocked your good to go. The super user.zip you first flashed won't be needed once you flash different ROMS, it was only needed for stock because you didn't install a ROM you just unlocked the boot loader and super user just gave you root access that didn't come with stock.
Yeah backup your stock ROM JUST in case you encounter a boot loop so you can just restore and start over, you don't need to back up CM9 that's completely your choice if you want . Its convenient though if you like CM9 but still like to flash other ROMS that way you can just go back if you miss CM9 without doing the whole setup process.
And a full wipe is
Data/factory reset
Then wipe dalvik under "advanced"
Then wipe system and boot under the "mount" option in CWM

stellar said:
Yeah if it says unlocked your good to go. The super user.zip you first flashed won't be needed once you flash different ROMS, it was only needed for stock because you didn't install a ROM you just unlocked the boot loader and super user just gave you root access that didn't come with stock.
Yeah backup your stock ROM JUST in case you encounter a boot loop so you can just restore and start over, you don't need to back up CM9 that's completely your choice if you want . Its convenient though if you like CM9 but still like to flash other ROMS that way you can just go back if you miss CM9 without doing the whole setup process.
And a full wipe is
Data/factory reset
Then wipe dalvik under "advanced"
Then wipe system and boot under the "mount" option in CWM
Click to expand...
Click to collapse
I'm not sure if I'm supposed to post links to videos or not. But I'm in love with some of the features this guy has on his NS4G
https://www.youtube.com/watch?v=IKdyAm3CgHc
He said it was a nightly etc.
The hidden status bar and bottom menu hidden is amazing. I also like the inverted G-Mail and Facebook. Is this all separate from the Nightly ROM?

Proper way to update ROM

I was just wondering what steps I need to take in order to install an updated version of my rom. Currently I use the aokp jb version 4. Want to update to the new milestone. Can someone help me out with the procedure? Will I lose any data?
Sent from my One X using xda app-developers app

dan798 said:
I was just wondering what steps I need to take in order to install an updated version of my rom. Currently I use the aokp jb version 4. Want to update to the new milestone. Can someone help me out with the procedure? Will I lose any data?
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
. First thing you should do is a nand backup in recovery (so you have something to go back to if all else fails)
. backup your SD card
. move your nand backup and sd card backup to your computer (that way if your sd gets corrupted you can reformat and push your backups to your device)
. you can also backup your apps + data with something like titanium backup (although now at least in JB if you have chosen this option Google will restore your apps, does not always work for me though so beware)
! Note that Tibu is quite controversial some people love it and swear by it and some people claim that it creates lots of issues, if you decide to use it, only use it to backup/restore user apps and not system apps. I personally use the pro version since it can sync backups to my Box and Dropbox account.
in addition to all of this I backup my sms, call log and custom launcher settings (but that's just me i'm a bit paranoid and I love redundancy)
When you're staying with the same rom you typically don't have to factory reset/clean install (unless of course the dev recommends it), just wipe cache and dalvik in recovery and flash your new rom.zip (don't forget to fastboot flash the boot.img if you're on the latest hboot) in recovery.
If you do not factory reset/clean install you will not loose data fingers-crossed. if you start encountering a lot of weirdness after a dirty flash well you will have to factory reset/clean install. I like to clean install most of the time so that I don't have to try to troubleshoot a bunch of stuff when s**T goes wrong plus it's easier to get support for obvious reasons.
In this particular case Milestone release of AOKP (milestone is a "stable" release and this is the first one) I would ABSOLUTELY do a clean install and I believe Rohan requires it because of kernel changes and the likes.
Hope all this makes sense and I did not forget anything.

Crappyvate said:
. First thing you should do is a nand backup in recovery (so you have something to go back to if all else fails)
. backup your SD card
. move your nand backup and sd card backup to your computer (that way if your sd gets corrupted you can reformat and push your backups to your device)
. you can also backup your apps + data with something like titanium backup (although now at least in JB if you have chosen this option Google will restore your apps, does not always work for me though so beware)
! Note that Tibu is quite controversial some people love it and swear by it and some people claim that it creates lots of issues, if you decide to use it, only use it to backup/restore user apps and not system apps. I personally use the pro version since it can sync backups to my Box and Dropbox account.
in addition to all of this I backup my sms, call log and custom launcher settings (but that's just me i'm a bit paranoid and I love redundancy)
When you're staying with the same rom you typically don't have to factory reset/clean install (unless of course the dev recommends it), just wipe cache and dalvik in recovery and flash your new rom.zip (don't forget to fastboot flash the boot.img if you're on the latest hboot) in recovery.
If you do not factory reset/clean install you will not loose data fingers-crossed. if you start encountering a lot of weirdness after a dirty flash well you will have to factory reset/clean install. I like to clean install most of the time so that I don't have to try to troubleshoot a bunch of stuff when s**T goes wrong plus it's easier to get support for obvious reasons.
In this particular case Milestone release of AOKP (milestone is a "stable" release and this is the first one) I would ABSOLUTELY do a clean install and I believe Rohan requires it because of kernel changes and the likes.
Hope all this makes sense and I did not forget anything.
Click to expand...
Click to collapse
Sounds excellent!! Yes this helps a ton, I was not sure of what I needed to wipe if anything. Thanks!

dan798 said:
Sounds excellent!! Yes this helps a ton, I was not sure of what I needed to wipe if anything. Thanks!
Click to expand...
Click to collapse
no problem..

Could you define a clean install and the steps?

RC196 said:
Could you define a clean install and the steps?
Click to expand...
Click to collapse
Clean install: The partitions are empty
Proper steps
Wipe System
Factory Reset
Wipe Cache (Optional, Factory reset should have done it already)
Wipe Dalvik Cache (optional, I usually dont wipe and problems dont occur)

RC196 said:
Could you define a clean install and the steps?
Click to expand...
Click to collapse
1.boot into recovery (twrp)
2. go into wipe menu and hit factory reset (DO NOT FACTORY RESET in FASTBOOT) this will wipe everything so backup first (see above post
3. flash the boot.img taken from your rom.zip of choice (this is if you are on latest version of HBOOT)
4. flash your rom.zip
5. reboot in system

Crappyvate said:
1.boot into recovery (twrp)
2. go into wipe menu and hit factory reset (DO NOT FACTORY RESET in FASTBOOT) this will wipe everything so backup first (see above post
3. flash the boot.img taken from your rom.zip of choice (this is if you are on latest version of HBOOT)
4. flash your rom.zip
5. reboot in system
Click to expand...
Click to collapse
Before I did any flashing, I made a backup of my phone of the latest HTC Sense. It was only unlocked and not rooted. That back up is still there. If I wanted I could wipe and restore this backup correct? I would not have to flash anything right?

RC196 said:
Before I did any flashing, I made a backup of my phone of the latest HTC Sense. It was only unlocked and not rooted. That back up is still there. If I wanted I could wipe and restore this backup correct? I would not have to flash anything right?
Click to expand...
Click to collapse
You will have to flash the boot.IMG from your backup and then restore the backup if you want to revert back to it
Sent from my HTC One XL

absolutelygrim said:
You will have to flash the boot.IMG from your backup and then restore the backup if you want to revert back to it
Sent from my HTC One XL
Click to expand...
Click to collapse
How would I get that boot image from the backup on my phone?

RC196 said:
How would I get that boot image from the backup on my phone?
Click to expand...
Click to collapse
You have to extract the boot.IMG to your computer and flash it with fastboot. Then restore the backup
Sent from my HTC One XL

This is what is in the backup folder in TWRP.

RC196 said:
This is what is in the backup folder in TWRP.
Click to expand...
Click to collapse
You can get the boot.IMG from the ruu zip or a 2.20 stock rooted Rom, which is in the one x pinup sticky in the android development section
Edit: boot.emmc.win is the boot.IMG. just rename it to boot.IMG and flash it from fastboot
Sent from my HTC One XL

absolutelygrim said:
You can get the boot.IMG from the ruu zip or a 2.20 stock rooted Rom, which is in the one x pinup sticky in the android development section
Edit: boot.emmc.win is the boot.IMG. just rename it to boot.IMG and flash it from fastboot
Sent from my HTC One XL
Click to expand...
Click to collapse
Oh OK thanks. So I actually didn't screw this part up LOL.:laugh:

absolutelygrim said:
You can get the boot.IMG from the ruu zip or a 2.20 stock rooted Rom, which is in the one x pinup sticky in the android development section
Edit: boot.emmc.win is the boot.IMG. just rename it to boot.IMG and flash it from fastboot
Sent from my HTC One XL
Click to expand...
Click to collapse
yep just rename boot.emmc as boot.img and now you can use this on one xl http://forum.xda-developers.com/showthread.php?t=1963896
makes it a lot friendlier, you don't need to extract the boot.img from the rom.zip, the app does for you and also you don't need a computer, you can do it all from your device

[Q] Updating ROM via GooManager

Hi All,
I have posted this on the GooManager thread but there hasn't been much activity there recently so asking here as well. Noob question on GooManager...I have the AOKP rom installed on my Sensation and GooManager notifies me of updates to my ROM every now and then. I just want to know if updating my ROM build with GooManager will reset all my custom ROM settings and preferences or will they all be preserved? I'd like to keep my ROM up to date but if it means spending all the time again to setup my preferences and icons/widgets/home screens etc. then I'd rather stick with what I have.
TIA!

I'd recommend to use GooManager only to download the newest ROM and flash it from recovery.
I asume you're using AOKP Swagger from frankenstine, the same I use.
I just download the update from GooManager, boot to recovery, flash ROM, gapps and 4.2 stuff and are ready to go.
All my settings are their after updating - only AdAway needs a reconfiguration and a reboot (and I need to set my alarm clock since I'm overwriting that). Basically you keep all your settings except those you made to the kernel.
Regards

lolmachine4 said:
I'd recommend to use GooManager only to download the newest ROM and flash it from recovery.
I asume you're using AOKP Swagger from frankenstine, the same I use.
I just download the update from GooManager, boot to recovery, flash ROM, gapps and 4.2 stuff and are ready to go.
All my settings are their after updating - only AdAway needs a reconfiguration and a reboot (and I need to set my alarm clock since I'm overwriting that). Basically you keep all your settings except those you made to the kernel.
Regards
Click to expand...
Click to collapse
Oh perfect, yes indeed I am using that exact ROM.
OK so when I boot to recovery, I shouldn't do any wiping? Just simply flash the new file? Will the updated gapps package be in the download I get from GooManager?

freddysensation said:
Oh perfect, yes indeed I am using that exact ROM.
OK so when I boot to recovery, I shouldn't do any wiping? Just simply flash the new file? Will the updated gapps package be in the download I get from GooManager?
Click to expand...
Click to collapse
I only wipe dalvik & cache after each update.
I can't say something about what GooManager downloads as "gapps", I use some I downloaded some weeks ago + some old version of 4.2 stuff. I might need to update my flash-setup too

lolmachine4 said:
I only wipe dalvik & cache after each update.
I can't say something about what GooManager downloads as "gapps", I use some I downloaded some weeks ago + some old version of 4.2 stuff. I might need to update my flash-setup too
Click to expand...
Click to collapse
Thanks lolmachine, for the benefit of anyone who might have the same question as me the following worked:
- Downloaded latest build of my AOKP Rom via GooManager
- Downloaded latest gapps package for my ROM via GooManager
- Boot to Recovery
- Flash new ROM file and then gapps package
- Restart.
My only question is, I didn't wipe davlik and cache so should I, and what difference does it make if I don't?

I used Goo the other day to flash, ummm, bugger, can't remember if it was an update or a new rom.
Oh now I remember, the latest one was an update to Bruce's Rom. I do believe when I tapped flash rom it booted to recovery (the one it installs) and I may have had to select "Install" from there, don't think so though. Either way, I used Goo to handle the install.
I didn't do a wipe. From what I've picked up, wiping is a good way to cover your butt. So if you're having issues and didn't wipe, you go back and do it all again with a wipe. Doing the wipe to start with means you can eliminate those types of issues from the start.
Someone can correct me if I'm wrong (which I probably am )

Hi there, I also received an update to my ROM via Goo Manager. It is CyanogenMod 10.1 by Albinoman887 for my HTC Sensation XE. I am using the EXT4 bootloader. I just installed it a few nights ago so I am completely new to rooting. My question is that there is no option to wipe dalvik cach. EXT4 just says wipe cache, wipe data and wipe system. Does wipe cache wipe dalvik cache as well. Also do I need to re-flash gapps as well after updating and will this wipe my gmail accounts etc?
Thanks,
Adam

thisisadamh said:
Hi there, I also received an update to my ROM via Goo Manager. It is CyanogenMod 10.1 by Albinoman887 for my HTC Sensation XE. I am using the EXT4 bootloader. I just installed it a few nights ago so I am completely new to rooting. My question is that there is no option to wipe dalvik cach. EXT4 just says wipe cache, wipe data and wipe system. Does wipe cache wipe dalvik cache as well. Also do I need to re-flash gapps as well after updating and will this wipe my gmail accounts etc?
Thanks,
Adam
Click to expand...
Click to collapse
You want to select "wipe dalvik+cache" option when you flash an update.
There's no need to flash gapps after a ROM update.
Sent from my Ouya

AndroidSupporter318 said:
You want to select "wipe dalvik+cache" option when you flash an update.
There's no need to flash gapps after a ROM update.
Sent from my Ouya
Click to expand...
Click to collapse
Thanks very much, downloading it now.

Help
im using albinoman's jelly bean rom
excuse me for noob doubts but
1) goo manager shows i have an update, so ive downloaded it. its a zip just like the rom n not just a small update. i have downloaded it now what should i do?
2) if i have to go to the recovery and flash the zip then i have to wipe only the cache right? Im using 4ext recovery.
3) will all my apps get uninstalled? what about the app data?
4) what about gapps? i have a gapps zip file, will i have to flash it again after the update?
Please reply thanks

I finally rooted phone after silly VMUNE7 thing on Verizon but after I get the install openrecoverscript and hit reboot recovery it does not go to teamwiz bootload instead I get something with a green driod on the bottom saying downloading but above it saying in red can't download Odin mode?? Please help I want to run cleanrom for better battery and less bloatware and keep my touchwiz. :crying:

all3rd said:
I finally rooted phone after silly VMUNE7 thing on Verizon but after I get the install openrecoverscript and hit reboot recovery it does not go to teamwiz bootload instead I get something with a green driod on the bottom saying downloading but above it saying in red can't download Odin mode?? Please help I want to run cleanrom for better battery and less bloatware and keep my touchwiz. :crying:
Click to expand...
Click to collapse
sorry man but i think you are talking for a samsung device am i right?
if yes then this is only for sensation/XE/4G devices

yasho170 said:
im using albinoman's jelly bean rom
excuse me for noob doubts but
1) goo manager shows i have an update, so ive downloaded it. its a zip just like the rom n not just a small update. i have downloaded it now what should i do?
2) if i have to go to the recovery and flash the zip then i have to wipe only the cache right? Im using 4ext recovery.
3) will all my apps get uninstalled? what about the app data?
4) what about gapps? i have a gapps zip file, will i have to flash it again after the update?
Please reply thanks
Click to expand...
Click to collapse
Simple.
Go to recovery.
For s-on you must enable smartflash.
Do a nandroid backup.
Dirty flash the update (meaning flash over the previous rom without wiping).
Dirty flash gapps (signed only).
Wipe cache + dalvik.
Reboot.
If it can't boot/run properly then you can just restore the backup or do a clean flash.

First off I'm not experienced in any way, got my Sensation unlocked, rootet and installed Sultanxda's 4.4.2 ROM for sensation. I'm on S-On, too, if anyone wonders.
Updating didnt affect my apps as far as I can tell. Everything seems to be the way as before and everything seems to be working.
What I did was download the ROM manually since the download with goomanager didn't work. I downloaded gapps as backup because I didnt have the zip on my SD, just in case anything would go wrong.
You only need to boot into recovery, with S-On make sure smartflashing or something like that is on, select the zip, flash it and then select wipe cache +dalvik.
It's pretty much what AndroidSupporter318 wrote, just wanted to give feedback and say what I did in detail in case anyone was still wondering.
LxMaD

I guaranted 4EXT Recovery for this type of problem. U don't need to boot into recovery and work with 4ext is very simple.

[Q] ViperS 3.1.2 + Sensation XE

Hi.
I want to switch to ViperS 3.1.2 but have few questions before I do so. I've never done it before so I'm new to this.
Does it come rooted (or do all ROMs come rooted)?
Is there any instruction on how to do it or just flash it from .zip via the recovery mode (I have CWM 5.x.x installed already)?
And are there any bugs with it such as Wi-Fi problems/tethering, or calls (speaker)?
Also, what if something goes wrong? I've got a backup of my current ROM (stock), so do I just flash that one back or try ViperS' in case it was a mistake on my side?
Lastly, I've heard some people mentioning OTA updates. I'm assuming it's done in the same way as stock ROMs, so you just need Wi-Fi/working internet and the new update will install on its own, or do I have to download the update from here and then do it myself?
Thanks!

MrCatalyst said:
Hi.
I want to switch to ViperS 3.1.2 but have few questions before I do so. I've never done it before so I'm new to this.
Does it come rooted (or do all ROMs come rooted)?
Is there any instruction on how to do it or just flash it from .zip via the recovery mode (I have CWM 5.x.x installed already)?
And are there any bugs with it such as Wi-Fi problems/tethering, or calls (speaker)?
Also, what if something goes wrong? I've got a backup of my current ROM (stock), so do I just flash that one back or try ViperS' in case it was a mistake on my side?
Lastly, I've heard some people mentioning OTA updates. I'm assuming it's done in the same way as stock ROMs, so you just need Wi-Fi/working internet and the new update will install on its own, or do I have to download the update from here and then do it myself?
Thanks!
Click to expand...
Click to collapse
Are you S-Off or S-On? If S-Off then you can flash the zip directly from recovery and if you're S-On then you gotta flash 4EXT recovery first and enable smart flash feature and then flash the zip file.
There are no major bugs in the Rom except the ones listed on the OP of the official thread. Enjoy flashing.
Sent from my HTC Sensation Z710e using xda app-developers app

I'm S-Off. I've had root earlier but I've installed SuperSU and accidentally pressed Clean SU which has pretty much wiped it. :|

Post your bootloader details to make things more clearer. Flashing a custom Rom doesn't need root access. You can flash it as you're s-off.
What Rom you're using currently? What firmware?
Sent from my HTC Sensation Z710e using xda app-developers app

I apologise for not posting, although it may be a bit too late now since I'm already installing the ROM.
So, just wanna know now - do ROMs come rooted, and if I can always go back to stock ROM as long as I have the boot.img/download stock ROM from HTC site?

MrCatalyst said:
I apologise for not posting, although it may be a bit too late now since I'm already installing the ROM.
So, just wanna know now - do ROMs come rooted, and if I can always go back to stock ROM as long as I have the boot.img/download stock ROM from HTC site?
Click to expand...
Click to collapse
Yup they come pre-rooted

Thanks for the help, everyone! Managed to install the ROM, despite being stuck in bootloop for 2 hours but it works flawlessly now.

MrCatalyst said:
I apologise for not posting, although it may be a bit too late now since I'm already installing the ROM.
So, just wanna know now - do ROMs come rooted, and if I can always go back to stock ROM as long as I have the boot.img/download stock ROM from HTC site?
Click to expand...
Click to collapse
Most roms come rooted, and the rest provide root tools so you have a choice while flashing.
To return to stock look up ruu. An ruu + s on = your device as it came.

If you had flashed Firmware-3.33 before the ROM - you would have had no "bootloops" at all! The most important thing is to have Firmware-3.33

Rom is broken , EMERGENCY , plz help
Hello everybody. I'm in a real trouble with my phone. it's very emergency , so i really need your help please. My ViperS 3.1.2 is broken and doesn't boot. i reinstalled Rom without wiping and again with update only setting but still doesn't boot.I flashed boot.img again but still... i did everything i could such as wiping cache and dalvik cache but again the same problem. the phone stays on "SENSATION" boot screen with beats audio on bottom for 20 seconds and suddenly screen become dark and phone restarts . i wiped dalvik and again "android is upgrading" starts and after it finished the phone restarts again i know if i perform a full wipe during Rom installation it will be fixed but i REALLY,REALLY,REALLY need my contacts and messages.... is there anyway i could fix my phone or make a backup of contacts and messages??? PLEEAAASSSE help me . tnx

VAHIDHAVASBEIGY said:
Hello everybody. I'm in a real trouble with my phone. it's very emergency , so i really need your help please. My ViperS 3.1.2 is broken and doesn't boot. i reinstalled Rom without wiping and again with update only setting but still doesn't boot.I flashed boot.img again but still... i did everything i could such as wiping cache and dalvik cache but again the same problem. the phone stays on "SENSATION" boot screen with beats audio on bottom for 20 seconds and suddenly screen become dark and phone restarts . i wiped dalvik and again "android is upgrading" starts and after it finished the phone restarts again i know if i perform a full wipe during Rom installation it will be fixed but i REALLY,REALLY,REALLY need my contacts and messages.... is there anyway i could fix my phone or make a backup of contacts and messages??? PLEEAAASSSE help me . tnx
Click to expand...
Click to collapse
If you made a backup before flashing you should restore it, or else flash the ROM you had before flashing.
Then use "Titanium Backup" and back up your messages (your contacts are automatically synced with your google account, unless you saved them on the phone, but you can change that with the "people" app.
after you backed your phone up, make a full wipe, and flash the new ROM. Install Titanium Backup and restore your messages backup.
Good luck.

astar26 said:
If you made a backup before flashing you should restore it, or else flash the ROM you had before flashing.
Then use "Titanium Backup" and back up your messages (your contacts are automatically synced with your google account, unless you saved them on the phone, but you can change that with the "people" app.
after you backed your phone up, make a full wipe, and flash the new ROM. Install Titanium Backup and restore your messages backup.
Good luck.
Click to expand...
Click to collapse
excuse me, you said 2 options . first is to restore backup , unfortunately i don't have backup. second is flashing the rom i had before flashing ! i didn't understand what you said... what do you mean? i don't have any backup, if you can help me to boot up phone just for 2 mins to backup my contacts! they aren't synced to my google account....

pleeeeaaaaaaaaaasssseeeee helppp meee. i am becoming crazyy because of my problem.... HELP PLZZZ :crying:

VAHIDHAVASBEIGY said:
excuse me, you said 2 options . first is to restore backup , unfortunately i don't have backup. second is flashing the rom i had before flashing ! i didn't understand what you said... what do you mean? i don't have any backup, if you can help me to boot up phone just for 2 mins to backup my contacts! they aren't synced to my google account....
Click to expand...
Click to collapse
Get a download of the ROM you had before, and you can flash it normally. If you had stock, find a download of stock ROM (although Sense 3.6 custom ROMs might actually work too).

Right
i dont had a Problem :good:

astar26 said:
Get a download of the ROM you had before, and you can flash it normally. If you had stock, find a download of stock ROM (although Sense 3.6 custom ROMs might actually work too).
Click to expand...
Click to collapse
excuse me again! you mean install another ROM without Wiping on ViperS? I am using ViperS for about 1 years, Are you sure? now i should download another ROM like Android Revolution HD for sensation and install it on my phone without performing full wipe and it can fix boot problem?

VAHIDHAVASBEIGY said:
excuse me again! you mean install another ROM without Wiping on ViperS? I am using ViperS for about 1 years, Are you sure? now i should download another ROM like Android Revolution HD for sensation and install it on my phone without performing full wipe and it can fix boot problem?
Click to expand...
Click to collapse
Oh no, I thought you wanted to flash viperS. Flash the ROM you had before flashing, whichever ROM that was (but flash that specific ROM, not a different one. My advice from the previous comment was if you came from stock ROM). If you flash the same ROM you don't have to wipe, and then you can back up your phone.

astar26 said:
Oh no, I thought you wanted to flash viperS. Flash the ROM you had before flashing, whichever ROM that was (but flash that specific ROM, not a different one. My advice from the previous comment was if you came from stock ROM). If you flash the same ROM you don't have to wipe, and then you can back up your phone.
Click to expand...
Click to collapse
ohhh , in my first post i said ( i reinstalled Rom without wiping and again ...) i mean i did your advice , but it doesn't fix my problem... :crying:

VAHIDHAVASBEIGY said:
ohhh , in my first post i said ( i reinstalled Rom without wiping and again ...) i mean i did your advice , but it doesn't fix my problem... :crying:
Click to expand...
Click to collapse
I hope you can operate adb, because the solution I found requires it.
Go to recovery, and use adbto pull the contacts database with the following command:
adb pull data/data/com.android.providers.contacts/databases/contacts.db
It might give an error for a protected directory (but I don't know since it's going to be done in recovery), if that happens, use 'adb shell' and then 'su'. then exit, and you have root access to the device (do it only if required).
Once you obtained the file, it should be on your adb folder. you need to open it with a database app which supports SQLite3 (I won't reccomend anyrhing since I've never used them. but from a quick search I found a few. and searching in the context of reading android databases would give some recommendations.).
Good luck
p.s - It's hard for me to believe this is the simplest solution. It might work, but it's not easy. So others might give better solutions.

astar26 said:
I hope you can operate adb, because the solution I found requires it.
Go to recovery, and use adbto pull the contacts database with the following command:
adb pull data/data/com.android.providers.contacts/databases/contacts.db
It might give an error for a protected directory (but I don't know since it's going to be done in recovery), if that happens, use 'adb shell' and then 'su'. then exit, and you have root access to the device (do it only if required).
Once you obtained the file, it should be on your adb folder. you need to open it with a database app which supports SQLite3 (I won't reccomend anyrhing since I've never used them. but from a quick search I found a few. and searching in the context of reading android databases would give some recommendations.).
Good luck
p.s - It's hard for me to believe this is the simplest solution. It might work, but it's not easy. So others might give better solutions.
Click to expand...
Click to collapse
tnx , if i try i can do it. i can operate adb easily . but a person said me to backup /data partition with recovery and then perform a full wipe and install viperS again then restore /data . do you have any idea abou it? can it help?

[Q] Accidentally wiped system, how to revert back to stock without losing root?

So i accidentally wiped the system using twrp. But i got it to work by using a usb flash drive n flashing a custom rom from there (paranoif android) And now ive been getting random reboots and crashes. I also flashed franco kernel. Also some system apps will not work properly, such as the calendar app. And i was thinking maybe thats because i wiped the system. Now i want to revert back to stock kikat without losing my root and unlocked bootloader. Im quite new to flashing roms and i find it easy using twrp. So how do i go about reverting back to stock, to see if those random crashes and reboots will go away?

xfranchize said:
So i accidentally wiped the system using twrp. But i got it to work by using a usb flash drive n flashing a custom rom from there (paranoif android) And now ive been getting random reboots and crashes. I also flashed franco kernel. Also some system apps will not work properly, such as the calendar app. And i was thinking maybe thats because i wiped the system. Now i want to revert back to stock kikat without losing my root and unlocked bootloader. Im quite new to flashing roms and i find it easy using twrp. So how do i go about reverting back to stock, to see if those random crashes and reboots will go away?
Click to expand...
Click to collapse
Try re-flashing another rom, as PA is a beta ROM, and thats where you may be having your crashed apps

xfranchize said:
So i accidentally wiped the system using twrp. But i got it to work by using a usb flash drive n flashing a custom rom from there (paranoif android) And now ive been getting random reboots and crashes. I also flashed franco kernel. Also some system apps will not work properly, such as the calendar app. And i was thinking maybe thats because i wiped the system. Now i want to revert back to stock kikat without losing my root and unlocked bootloader. Im quite new to flashing roms and i find it easy using twrp. So how do i go about reverting back to stock, to see if those random crashes and reboots will go away?
Click to expand...
Click to collapse
You can always flash the factory images here: http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
You can flash any ROM and that should fix your issue
You will not lose your unlocked bootloader unless you flash the stock one which is in the factory images

Your bootloader will not relock unless you lock it yourself using fastboot. Flashing roms or factory images won't lock it by themselves.
And even if it somehow did, one fastboot command and you're unlocked again.
And as far as root goes....it takes 5 minutes to reroot.
So just flash whatever factory image you need and then custom recovery, and you're done. Maybe need to download superSU from play store after.
Sent from my N5, N7, Moto X, G Tab 3 or S2.....

justinisloco said:
Try re-flashing another rom, as PA is a beta ROM, and thats where you may be having your crashed apps
Click to expand...
Click to collapse
So i just flashed purity rom, and im still having the same issues, but the crashes and reboots are less yet their still there. Maybe reverting back to stock rom will do the trick?

xfranchize said:
So i just flashed purity rom, and im still having the same issues, but the crashes and reboots are less yet their still there. Maybe reverting back to stock rom will do the trick?
Click to expand...
Click to collapse
The crashes and reboots are because you didn't wipe data/factory reset and also didn't wipe dalvic/cache...
If you're keen on using a custom rom follow these steps:
1. Head over to recovery and wipe data/factory reset and wipe dalvic/cache
2. Flash rom.zip and gapps.zip
3. Reboot!
Initial boot can take upto 10 minutes sometimes so be patient...
If you want to go fully stock then follow this thread:
http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701

vin4yak said:
The crashes and reboots are because you didn't wipe data/factory reset and also didn't wipe dalvic/cache...
If you're keen on using a custom rom follow these steps:
1. Head over to recovery and wipe data/factory reset and wipe dalvic/cache
2. Flash rom.zip and gapps.zip
3. Reboot!
Initial boot can take upto 10 minutes sometimes so be patient...
If you want to go fully stock then follow this thread:
http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
Click to expand...
Click to collapse
Sorry if i did not include this on the op, but everytime i were to flash a rom or gapps i would wipe data/factory and dalvic/cache, since i had those issues i even wipe internal memory just to see if the problems were there.

xfranchize said:
Sorry if i did not include this on the op, but everytime i were to flash a rom or gapps i would wipe data/factory and dalvic/cache, since i had those issues i even wipe internal memory just to see if the problems were there.
Click to expand...
Click to collapse
Maybe your flashing a bad version of GApps since the force closes are on google Calander?
Are you using a 4.4.2 GApps?

Im on cataclysm now, and i believe no gapps needed since their included in the zip. Have had about 3 reboots, i believe their because of playstore downloading an update or something, and one caused by either bluetooth or hello messaging app. But who knows. Just one more thing, by me accidentally wiping the system shouldnt be the cause of my random crashes and reboots?
Sent from my Nexus 5 using Tapatalk

xfranchize said:
Im on cataclysm now, and i believe no gapps needed since their included in the zip. Have had about 3 reboots, i believe their because of playstore downloading an update or something, and one caused by either bluetooth or hello messaging app. But who knows. Just one more thing, by me accidentally wiping the system shouldnt be the cause of my random crashes and reboots?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Why don`t you backup your user apps and data with TB and start fresh by flashing the stock image, reroot and reflash a custom rom in recovery. This will eliminate all errors and reboots.

gee2012 said:
Why don`t you backup your user apps and data with TB and start fresh by flashing the stock image, reroot and reflash a custom rom in recovery. This will eliminate all errors and reboots.
Click to expand...
Click to collapse
Sorry but how do i do that? Im really new to this, i had someone else root and unlock my bootloader for me. How do i flash the stock image then root?

xfranchize said:
Sorry but how do i do that? Im really new to this, i had someone else root and unlock my bootloader for me. How do i flash the stock image then root?
Click to expand...
Click to collapse
Read this thread http://forum.xda-developers.com/goo...ide-nexus-5-how-to-unlock-bootloader-t2507905 well and all should be pretty easy.

gee2012 said:
Read this thread http://forum.xda-developers.com/goo...ide-nexus-5-how-to-unlock-bootloader-t2507905 well and all should be pretty easy.
Click to expand...
Click to collapse
Okay cool, do i just skip the bootloader part right?
Sent from my Nexus 5 using Tapatalk

xfranchize said:
Okay cool, do i just skip the bootloader part right?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Yes, just flash the factory image (flash-all.batt) in fastboot, reboot and setup the phone. Flash a custom recovery and flash the superSU.zip (1.94 is the latest).

gee2012 said:
Yes, just flash the factory image (flash-all.batt) in fastboot, reboot and setup the phone. Flash a custom recovery and flash the superSU.zip (1.94 is the latest).
Click to expand...
Click to collapse
Okay ill give it a shot, thanks alot. Ill update here if im successful.
Sent from my Nexus 5 using Tapatalk