ive tried z4root,gingerbreak,and a few others i have tried superoneclick but the only problem was when it got to the second step it said findinG daemon 5.12s, i waited that long but nothing happened after that.Should i wait longer? , plz help anyone, this is my tablets info. any help would be greatly appreciated. im frustrated plz help.
name:New Base10inch Flytouch6 SuperPad VI Vimicro VC882 cortex-A8 1.0GHz android 2.3 OS with GPS HDMI
OS: AndroidTM 2.3.4
CPU: VC882 Embedded 1.0GHz ARM Cortex A8 32-bit processor core
3D: Supported
Storage: DDR3 512MB/Nand Flash 4GB/8GB/16GB Extended Maximum 32GB
LCD: 16:9,resolution 1024*600 ,TFT LCD 16M Color Depth
TP: 10.1 inch,resistive (one point touch)
Button: Power/ESC,Volume+/-,Menu,Reset
G-sencor: G-Sensor 3 3D Game
WiFi: WiFi 8188(b/g/n)
3G: 3G(external),TD-SCDMA,WCDMA,EVDO and so on
GPS: Built in GPS
Camera: 1.3 Mega Pixel
Video output: 1080P Full HDMI video @ 30fps
Video record: 1080p HD video
record: Stereo Speaker
audio: MP3/WMA/APE/FLAC/AAC/AC3/WAV and so on
Frequency: 20Hz ~ 20KHz
SNR: 85dB
Loudspeaker: 2pcs-1w stereo
Video: 1080P,support RV,H.264,VC-1,H263,MPEG4,VP6,MKV(H.264 HP),
AVI,RM/RMVB,FLV,MPEG-1,MPEG-2
Browser: Webpage,WAP,MPLAYER Flash 10.3 Supported
Networking: QQ,MSN,Skype and so on
Office tools: Word, Excel, Powerpoint,Quick office,PDF reader and E-mail
Image: JPEG/BMP/GIF/PNG/TIFF and so on
Games: Download from Android Market free,Angry Birds,Ninja etc
Languages: Multi-Languages About 20
Input: Google,Sogou,soft keyboard,hand input Android Keyboard
Ebook: PDF/TXT/CHM/DOC/EXCEL(need third party software)
USB: 2PCS-USB 2.0
U disk,Mouse,3G wireless USB(Huawei ET128)
Earphone port: 2.5mm
DC: DC 5V 3A
TF card slot: 1 Piece-TF card slot,extended to 32GB Maximum
Battery: Best A Grade 6400MAH Lion Battery
If you still haven't managed to root it yet then DooMLoRDs script will do it for you
http://forum.xda-developers.com/showthread.php?t=1321582
Have you made sure that USB debugging is enabled on your device?
Settings > Applications > Development > USB debugging
or you could do it manually - see attached Says Aishuo but should workd with any adb drivers.
Dont think it can be done perm as updates remove root.
computer wont recognize my tablet
when i first got my tablet i tried to plug it in to my computer with the included male to male usb cable with it turned off and after i turned it on it started up and the computer picked it up and installed drivers, after that my tab said enable usb debugging and enable mass storage then i was freely able to use it connected to the computer. later i tried to do the same and my tablet started up but nothing happened with the computer or the tablet. please help my computer is a dell inspiron and the usb cable is a normal male to male usb cable. i will use the zergerush method if i can have my computer recognize my tablet. maybe the problem is the usb cable itself but not the computer because I've tried it on three other computers and they all didn't pick up my tablet. i know its not the usb port on the tablet because it picks up my usb keyboard case and my iPod nano.
ive used tons of different one click methods and none of them worked. any help would be greatly appreciated thanks!
also how can i download abd drivers for my device to use zergrush
Just flash this pre-rooted rom:
https://community.nwrk.biz/?node/pubsub.xmpp.nwrk.biz/android/b55aa54c-5be0-419c-8a8c-7d9374b06784
Please help me, Unbrick my tablet.
i don't know if i'm on right section but i really need your help guys. ;(
i accidentally bricked my tablet.
here's the story goes.
i installed a "busybox pro" apps in my tablet and then install the new busybox and then suddenly it reboots and hang!
and then stuck forever on the boot screen.
Please help me out guys.
I really need your help.
by the way this is my tablet
it's cheap but all i can afford
simmtronics T701 android tablet gingerbread
Model No : SIMM-T701
Type SA10
Main Frequency 1.6GHz
Core Type Cortex A8
Six in One Architecture HD Video Decoder (2160P)
HD Video Encoder (1080P)
Audio Processor
Dual Mali-400 2D/3D Graphics
Panel Type TFT-LCD
Size 7”
Display Ratio 16:09
Resolution 800*480
Type Capacitive Multi Touch
Memory DDR3 512MB
Nand Flash MLC 4GB
TF Card Max: 32GB
Wireless Network WiFi IEEE 802.11 b/g
3G Model USB-Dongle
3G Standard WCDMA / CDMA EVDO
Camera 0.3M pixels
G-Sensor Yes
I\O DC-in 2.0mm DC-input jack 5V 2A
Earphone Jacket 3.5mm Stereo
USB Socket Mini 5 pin USB port ( OTG)
TF card socket Micro SD (Push-Push)
TV - OUT Jacket 3.5mm jacket
Loudspeaker & Mic
POWER, VOL+, VOL-, LOCK, MENU, HOME, RETURN, RESET
Battery Contain >13 WHr
Type & Rating Lithium-polymer Battery, 3.7V
Adaptor 5V / 2A
Working Time > 5Hours Web browsing
OS Android 2.3
Linux Kernel 2.6.36.4
Language Support Support Multi Languages
Input Method Android Keyboard (Multi Languages)
Reset Method Reset Key (Hardware) + Reset Software
------------
Help me please.
Hi.
I have an tablet.
My tablet supports OTG.
I can use usb mouses,keyboard discs etc.
Can I use external bluetooth dongle on my tablet?
it doesnt have bluetooth menu in settings.
I attached my bluetooth to topic.
but my tablet havent device model.
only MID CTA
Casper CTA-E07-11A
Mali 400 Single Core GPU,Amlogic AML8726-M3 Single Core 1GHz CPU,1GB RAM,1024x600 7" Display and Android 4.0.3 ICS
Sorry for my English.
Hello XDA,
allow me to point out my problem. Screen in my phone cracked, LCD works perfectly but digitizer does not. I didn't have USB Debugging on and I have made a factory reset so root is probably also gone.
My phone is Goclever Insignia 5x which is also known as Highscreen Alpha R, Karbonn Mobiles Titanium S7 and Maysun MID5002 ( Chinise Vendor ).
Specs:
CPU: MediaTek MTK6589T 1.5GHz (Cortex A7) QuadCore
GPU PowerVR SGX 544
OPERATING SYSTEM Android 4.2
RAM 1GB DDR2
FLASH 4GB eMMC
WI-FI WiFi b/g/n
3G Built-in 3G and 2G
FREQUENCY BAND GSM 850MHZ/900MHZ/1800MHZ/1900MHZ UMTS 900MHZ/2100MHZ HSPA+
BLUETOOTH Yes
SD CARD READER microSD up to 32GB
SIM CARD SLOT Dual Sim (3G and 2G)
USB microUSB 2.0 (charging and data transfer)
AUDIO OUT 3.5mm audio and mic jack
FRONT CAMERA 2.0 MPix
BACK CAMERA 13.0 MPix with a flash light
SENSORS Light sensor, G sensor, Proximity sensor
GPS Built-in GPS receiver
FM RADIO Built-in FM radio
BATTERY CAPACITY 2000 mAh + 4000 mAh
DIMENSIONS 143 x 72 x 9 mm (with 2000 mAh battery)
WEIGHT 156 g (with 2000 mAh battery)
COLOUR Black
What i have:
Original ROM + root + CWM : h t t p s://dl.dropboxusercontent.com/u/10750423/UdstPub/pliki/forum.android.com.pl/GcI5xV5%21Files_to_FlashTool.zip
Original Kernel: h t t p://openlinux.goclever.com/INSIGNIA_5_5X/
My files (default and build prop and settings.db ): h t t p://www18.zippyshare.com/v/85260652/file.html
Let me describe what i need: as digitizer is broken I simply can't do anything "normal" which is obvious. I have installed drivers for my phone and used spflashtool successfully. When I'm in CWM I can use ADB to operate on files and shell. I know that there is an option to enable adb and get rid of welcome screen by adding lines to build prop and settings but I tried and my android would not start. I would also know if there is any way to modify kernel in order to enable OTG ( which I don't have ).
So basically I wanted to ask Android Masters to modify the ROM and/or Kernel ( that would make my life easier ) or guide me what to do ( without installing linux please if it isn't necessary )
Well that is all from me. I can provide any files from my phone as log as you tell me where to look for them . Any help appreciated. Thanks
P.S. To moderators: Sorry for the links but i didn't wanted to spam 10 posts just to be allowed to provide links.
Hello everyone
I have a Prixton PC02 Windows 10 tablet (and bluetooth keyboard), Windows 10 asked me to update it and I said no then the tablet went crazy, now when I boot the tablet up it shows the Prixton logo then the screen stays black (but with brightness so I can still see it is on). With the screen black if I press the touchscreen I can slightly see the cursor and a blue loading circle.
I have tried a few solutions to get Windows 10 to load normally which are:
1- Drain the battery completely with it on the black screen and then charge and restart
2- Use the Windows 10 USB recovery.
Now, with the USB plugged into an adapter into the tablets micro USB slot, the tablet loaded from the USB drive, once in the recovery menu I tried to diagnose and fix problems with the boot of Windows, it shown as attempting repairs and then after a while it gave me a message saying that it cannot be repaired.
Another option I tried was resetting the device, this starts to work up to 2% then it boots me back to the recovery menu.
Now the tablet won't load the USB at all
Just wondering if anyone knows of any other possible solutions? And thanks if you do
Later I will buy a MicroSD card to see if I can boot from that.
Tablet details:
Touchscreen: 7" 1024x600 TN
Operating System: WINDOWS 10
CPU: Intel® AtomTM Z3735G (Quad Core, up to 1.83GHz)
Internal memory: 16GB RAM 1GB DDR3L
Bluetooth Keyboard
External 3G support
WIFI IEEE802.11b/g/n wireless network
Camera: 0.3 MP y rear 2.0 MP
Bluetooth 4.0