vzw sg3 rooted, unlocked with cwm installed. I was trying to flash synergy backup plan for IMEI and now the phone is stuck in download mode. Pulling the battery does nothing, boots back up into download mode. Connected phone to comp and tried to oden a stock rom and cannot navigate to the file image. The file path in odin has PDA File(*.tar,*.md5,*,smd,*.gz,*.tgz) locked in and cannot remove.
Of the phone boots into download mode then you should be able to odin it.
Have you tried rebooting the computer first, and then reconnect the phone?
One thing that has worked for me in the past is use Odin to flash CWM. Then pull the battery re-insert it do the 3 button boot and hopefully your back in recovery.
Also I don't believe Odin is .zip friendly read http://forum.xda-developers.com/showthread.php?t=1840030 if you want to go back to stock rooted.
I've rebooted comp pulled battery, but every time i go into odin and try to load the image file it disappers from the folder and that tar file i posted is locked into odin's file path. That has to be why my image file is disappering from the rom folder, but i know of no way to clear that tar file out. Tks for the reply i need all the info i can find.
brotherandyslb said:
One thing that has worked for me in the past is use Odin to flash CWM. Then pull the battery re-insert it do the 3 button boot and hopefully your back in recovery.
Also I don't believe Odin is .zip friendly read http://forum.xda-developers.com/showthread.php?t=1840030 if you want to go back to stock rooted.
Click to expand...
Click to collapse
Thanks for the help ill try to Odin CWM and i have unzipped the files and the image file to flash is there till i try to navigate to it with Odin and then it disappears.
Have you tried a different version of Odin?
Download CWM from here: http://www.clockworkmod.com/rommanager
rondog2 said:
Thanks for the help ill try to Odin CWM and i have unzipped the files and the image file to flash is there till i try to navigate to it with Odin and then it disappears.
Click to expand...
Click to collapse
brotherandyslb said:
One thing that has worked for me in the past is use Odin to flash CWM. Then pull the battery re-insert it do the 3 button boot and hopefully your back in recovery.
Also I don't believe Odin is .zip friendly read http://forum.xda-developers.com/showthread.php?t=1840030 if you want to go back to stock rooted.
Click to expand...
Click to collapse
I owe you big time kind sir, i used that link and i'm back up and running, thank you, thank you, thank you. :good:
Glad it worked! We really don't have a reason to backup the imei anymore there is a program out that will write your imei back to your phone if your phone ever looses it. http://forum.xda-developers.com/showthread.php?t=1867442 I guess it is nice to have a backup plan if you are not close to a computer when flashing a new rom.
brotherandyslb said:
Glad it worked! We really don't have a reason to backup the imei anymore there is a program out that will write your imei back to your phone if your phone ever looses it. http://forum.xda-developers.com/showthread.php?t=1867442 I guess it is nice to have a backup plan if you are not close to a computer when flashing a new rom.
Click to expand...
Click to collapse
I had already wrote it to the phone but was trying to be double safe....lol Thanks again, i can sleep easy now. :laugh:
brotherandyslb said:
Glad it worked! We really don't have a reason to backup the imei anymore there is a program out that will write your imei back to your phone if your phone ever looses it. http://forum.xda-developers.com/showthread.php?t=1867442 I guess it is nice to have a backup plan if you are not close to a computer when flashing a new rom.
Click to expand...
Click to collapse
That the hard way. That is last resort. The terminal nvbackup/nvrestore is much easier and that program don't work everytime for everybody. Sometimes does not see com port.
Related
Hello Everyone, This is Now an Instructional Odin ROM to flash Back to Factory Stock and/or Recover your Broken System.
This is 100% STOCK Odexed T839UVKD1 firmware For the Sidekick 4G and needs to be flashed through Odin. Odin is attached below along with the Sidekick 4G pit.
How to Install/Flash.
Code:
0. Download the KD1OdinSTOCK.tar.md5 File (Find link Below)
1. Remove the .md5 tail
2. Open odin with phone not connected yet
3. Boot in to download mode using Trackpad+Vol down then power
4. Connect phone to pc
5. KD1OdinSTOCK.tar in pda slot, Use SK4G pit file from below in Pit Slot
6. Double check that only auto-reboot is checked (if it doesnt work the first time, click re-partition)
7. Click flash
First boot may take around 3-5 mins. Wait it out and then you should be good to go.
KD1OdinSTOCK.tar.md5 >> DOWNLOAD
UPDATE: FOOL PROOF WAY TO GET INTO DOWNLOAD MODE
ayoteddy said:
Try this, take the battery sim and sd card out of your phone.
Open odin, put the tar in pda and pit into pit.
Plug your phone into the usb.
Now bare with me, this part is a bit akward but you can do it.. hold the vol down key and trackball *with one hand* and put the battery in while holding them. You will be in download mode and Odin will detect your phone. Then flash
Sent from my SGH-T839 using XDA App
Click to expand...
Click to collapse
Thanks to Xda Members Datlilboricua and tweeklulz for testing these files for me.
Use the Thanks button if this was helpful ; post below if you have feedback/questions ect, Thank you and please enjoy!
Nice one! Keep at it. There are a bunch of us waiting for this!
Sent from my SGH-T839 using XDA Premium App
downloading now, i'll package them
thanks for pulling these man
edit: just got back from the bar and I work in 6 hours i'll upload it later
Can anyone teach me how to install it in sidekick
Sent from my SGH-T839 using XDA App
Mirrors:
Part 1: http://gititbit.ch/skgi
Part 2: http://gititbit.ch/skgi2
Is this still being packaged Blu? I could really use a working odin tar right now... accidentally soft bricked trying to use a recovery.tar to get rid of ClockworkMod and get back to a stock recovery.
sduvick said:
Is this still being packaged Blu? I could really use a working odin tar right now... accidentally soft bricked trying to use a recovery.tar to get rid of ClockworkMod and get back to a stock recovery.
Click to expand...
Click to collapse
Just packed now sorry. You flashed the one from the restoring stock recovery thread? What was your method of flashing it? Does it boot up at all or stick at the samsung boot screen? (i packaged that one and am curious as I heard reports of it working)
Download link: still uploading
Pit file attached in case you need it (unrar it first)
I do not guarantee that this will work, all I did was tar the files and upload them (and edit the pit). I did not trim the datafs.rfs file due to lack of ability to test it. Flash AT YOUR OWN RISK! so If this fails you now own a fancy brick!
edit:Not posting the tar yet for privacy of ayoteddy and potentially his logins to websites. The data wasn't wiped and has all his info, waiting for a clean one.
damn those files shouldnt contain any data since i had factory wiped just before pulling those images. *shrug* there might be a more in-depth way to clear all data
anyways im sure we can have a functional odin image with only the following files included
zImage
modem.bin
factoryfs.rfs
Recovery.bin
Param.lfs
i doubt anybody will be messing with anything else in their file sys but that should be able to recovery anybody from a soft brick.
Edit: Also dis-include the sbl and boot.bin as it could be very dangerous overwriting those files.. not really necessary anyhow.
I'm actually stuck at the black screen with a phone and a computer with a yellow triangle in the middle. Yeah, I was trying to flash a stock recovery from the stock recovery thread. Got a little desperate and tried to flash the recovery tarred for Odin, and that sent me to where I am now. I appreciate all your hard work guys, and have learned my lesson not to flash unless there's a lot of backups handy ;]
I'll try the pit, not sure if I may need more or not, you guys probably know better than me.
EDIT: as I am not skilled in using Odin and do not wish to cause further damage to my phone, I will await instructions from you guys/ayoteddy's image.
sduvick said:
I'm actually stuck at the black screen with a phone and a computer with a yellow triangle in the middle. Yeah, I was trying to flash a stock recovery from the stock recovery thread. Got a little desperate and tried to flash the recovery tarred for Odin, and that sent me to where I am now. I appreciate all your hard work guys, and have learned my lesson not to flash unless there's a lot of backups handy ;]
I'll try the pit, not sure if I may need more or not, you guys probably know better than me.
EDIT: as I am not skilled in using Odin and do not wish to cause further damage to my phone, I will await instructions from you guys/ayoteddy's image.
Click to expand...
Click to collapse
What did you do while flashing it? What boxes did you tick? Where did you put the tar, etc
@ ayoteddy alright i'll just make one from those, only reason i was including cache before is I heard its where permissions were stored though as you said I'm sure those files work fine
Here it is:
Odin + pit: attached
sk4g_stock.tar.md5.rar: Click here
UNRAR the tar first (i didn't want to trim factoryfs.rfs due to unability to test so I compressed it instead)
Put the extracted sk4g.tar.md5 in the pda slot
make sure ONLY AUTO-REBOOT is checked (unless you are re-partitioning, then use re-partition and the pit file)
1. open odin with phone not connected yet
2. boot in to download mode using Trackpad+Vol down then power (thanks sduvick)
3. connect phone to pc
4. sk4g_stock.tar.md5 in pda slot
5. double check that only auto-reboot is checked (and the pda you selected of course)
6. Click flash
Disclaimer: Flash at your own risk, if you get bricked I am not liable.
The odin tar includes
factoryfs.rfs
modem.bin
param.lfs
recovery.bin
zImage
Thanks blu, @sduvick would prolly be the first to test cause he was waitng for this.. hope everything works out for em
He also figured out how to get into downlode mode ..
Trackpad+Vol down then power
Sent from my SGH-T839 using XDA App
I'm not entirely sure what I did. I think I put the recovery.tar.md5 in the wrong place. anyways, I'm back out of bricked, and now just waiting for a working stock restore tar to get back to stock.
EDIT: just saw the tar, downloading now, will test in around 10 min when the file is downloaded.
sduvick said:
I'm not entirely sure what I did. I think I put the recovery.tar.md5 in the wrong place. anyways, I'm back out of bricked, and now just waiting for a working stock restore tar to get back to stock.
Click to expand...
Click to collapse
Did you try my one click stock in the same post?
Yeah, I didn't have the same root method, so that didn't get rid of Clockwork for me.
First try at flashing failed almost at the end, at recovery.bin if I'm not mistaken. I'm trying to run it again.
EDIT: Failed again, at recovery.bin
sduvick said:
First try at flashing failed almost at the end, at recovery.bin if I'm not mistaken. I'm trying to run it again.
EDIT: Failed again, at recovery.bin
Click to expand...
Click to collapse
Got it working through pm with him.
attach the pit and re-partition. then flash the tar
sduvick wanna post the steps you used?
I can actually give steps based on what you have for symptoms (too much experimenting for me haha)
If you have the "soft brick," that is the small phone and computer icons, just connect to Odin and flash the full image.
Black screen, no logo.
1. Get into download mode by using VolDown+Touchpad+Power
2. flash full sk4g.tar.md5 as posted.
logo only
1. Download mode
2. Flash full package
Can't flash recovery/boot/sbl
1. Download mode
2. use PIT only, run with repartition checked
3. reboot/reDownload mode
4. run the full image in Odin.
Anything else
1. Download mode
2. Full tar.md5 flash in Odin
3. Ask if it doesn't work
sduvick said:
i can actually give steps based on what you have for symptoms (too much experimenting for me haha)
if you have the "soft brick," that is the small phone and computer icons, just connect to odin and flash the full image.
Black screen, no logo.
1. Get into download mode by using voldown+touchpad+power
2. Flash full sk4g.tar.md5 as posted.
Logo only
1. Download mode
2. Flash full package
can't flash recovery/boot/sbl
1. Download mode
2. Use pit only, run with repartition checked
3. Reboot/redownload mode
4. Run the full image in odin.
Anything else
1. Download mode
2. Full tar.md5 flash in odin
3. Ask if it doesn't work
Click to expand...
Click to collapse
sticky this **** mothafuckas!!!
The Pope of Dope said:
sticky this **** mothafuckas!!!
Click to expand...
Click to collapse
good thing some incredibly sexy blu guy made that pit file. I hear he has the face of brad pitt with abs like jesus.
Hi all, after successfully flashing aeon gears boot animation with clockwork mod from this thread http://forum.xda-developers.com/showthread.php?t=1656709 I then attempted to flash the Aeonised Forrest theme also from that same thread. This was my first attempt at flash a custom theme and as far as I am aware Entropy's kernel supports custom themes? Was it wrong to use CWM to flash the theme, according to CWM after the flash things went well however after rebooting I am stuck in a boot loop. Thinking of trying one click back to stock with this http://forum.xda-developers.com/showthread.php?t=1524081 Any ideas what went wrong? Please note that Clockwork Recovery and Download mode both still work. Any suggestions how to do it the right way would be appreciated.
Thanks Much
LordKoga
LordKoga said:
Hi all, after successfully flashing aeon gears boot animation with clockwork mod from this thread http://forum.xda-developers.com/showthread.php?t=1656709 I then attempted to flash the Aeonised Forrest theme also from that same thread. This was my first attempt at flash a custom theme and as far as I am aware Entropy's kernel supports custom themes? Was it wrong to use CWM to flash the theme, according to CWM after the flash things went well however after rebooting I am stuck in a boot loop. Thinking of trying one click back to stock with this http://forum.xda-developers.com/showthread.php?t=1524081 Any ideas what went wrong? Please note that Clockwork Recovery and Download mode both still work. Any suggestions how to do it the right way would be appreciated.
Thanks Much
LordKoga
Click to expand...
Click to collapse
what rom are you on...or where?
bigjoe2675 said:
what rom are you on...or where?
Click to expand...
Click to collapse
Using stock 2.3.6 with Entropy's Daily Driver Kernel, rooted as well. Download mode starts but phone does not show up in Heimdall trying to find a solution via ODIN as my phone shows up in that at least.
LordKoga said:
Using stock 2.3.6 with Entropy's Daily Driver Kernel, rooted as well. Download mode starts but phone does not show up in Heimdall trying to find a solution via ODIN as my phone shows up in that at least.
Click to expand...
Click to collapse
Unless I missed the bus...which I do a lot, so I just walk...LOL
Evergreen Theme Theme for AEON ROM....not stock...?
do you have driver loaded on your pc?, There are drivers for Infuse on the super infuse page, see my links...
or try diff usb port or cable...or pc...
does it ask for drivers for heimdall? which those are different drivers than odin...
if you want those nice, beautiful themes that mikig make...flash Aeon, then flash the themes...kk
but the Super Infuse page has all the ROM/tools/drivers you need for the Infuse...the individual that maints that page is just a loser, but dont tell him, he is dork with an additude...ok :laugh:
see "My links" in red...go there if you need anything else for you infuse...kk
I have a copy of ODIN with a few files in it not sure if they are useful? Files are: PHONE_UCKD5.tar.md5, infuse.pit, PDA_UCKD5.tar.md5
Will any of those fix my boot loop? Flashing a theme shouldn't permanently brick me right?
LordKoga said:
I have a copy of ODIN with a few files in it not sure if they are useful? Files are: PHONE_UCKD5.tar.md5, infuse.pit, PDA_UCKD5.tar.md5
Will any of those fix my boot loop? Flashing a theme shouldn't permanently brick me right?
Click to expand...
Click to collapse
Flashing with ODIN phone shows up with the COM thingy yellow, but seems to be stalled at SetupConnection on ODIN any help???
LordKoga said:
Flashing with ODIN phone shows up with the COM thingy yellow, but seems to be stalled at SetupConnection on ODIN any help???
Click to expand...
Click to collapse
Hold the power button down for a little while. The phone may go into a screen w/ an image of Phone-!-PC. Reset Odin and restart from there. It should work then. If not, reset Odin and put the phone in download mode again.
Sent from my HTC_Flyer_P512_NA using Tapatalk 2
LordKoga said:
A good while ago I flashed my phone with the Heimdall method provided by your one click to stock thread for GB. I then rooted my phone after flashing Entropy's Daily Driver, I being rather dumb then tried to flash one of the Aeon themes with CWM http://forum.xda-developers.com/showthread.php?t=1656709 The Forest theme from that thread. My phone then decied to go into a boot loop. I am now attempting to recover with ODIN but i think it's stuck? It seems to be stuck at SetupConnection message in ODIN. I was hoping you could offer some advince on how to unbrick myself.
Thanks
LordKoga
My thread about problem
http://forum.xda-developers.com/showthread.php?t=1779146
Click to expand...
Click to collapse
Odin and heimdall uses different device recognition drivers.
I've not used Odin for over 9 months so I can't offer advice there. Jscott30 has more experience with Odin.
If you want, you can restore your phone using the heimdall 1 click uclb3 I put together.
Flash in download mode. It will restore your phone if used correctly.
If you want to try, before flashing anything else, try first booting into recovery using the three finger techniques into cwm and flash aeon or another MUF.
Recovery may still work.
qkster said:
Odin and heimdall uses different device recognition drivers.
I've not used Odin for over 9 months so I can't offer advice there. Jscott30 has more experience with Odin.
If you want, you can restore your phone using the heimdall 1 click uclb3 I put together.
Flash in download mode. It will restore your phone if used correctly.
If you want to try, before flashing anything else, try first booting into recovery using the three finger techniques into cwm and flash aeon or another MUF.
Recovery may still work.
ODIN WORKED!!!!!
Now all good Although I think my data was wiped off
However I had no custom roms on my SD to flash and could only boot in to DL mode and CWM neither were of use .
At the very least now that I'm all clear i might flash Aeon rom.
THANKS SO MUCH FOR ALL YOUR INPUT I TRUELY APPRECIATE ALL YOU AWESOME PEOPLE.
Click to expand...
Click to collapse
LordKoga said:
THANKS SO MUCH FOR ALL YOUR INPUT I TRUELY APPRECIATE ALL YOU AWESOME PEOPLE.
Click to expand...
Click to collapse
Good luck with everything. Make sure to click the "Thanks" button on everyone that helped you out.
One thing you should take away from this experience is to make sure you do a NANDROID BACKUP before flashing ANYTHING in CWM.
Learn how to get into CWM using the 3-finger method, too. It can come in handy.
I Am unable to mount system or cache either and also i cant flash certain files from my CWM recovery I think it is because I forgot to root my device before flashing the CWM from stock recovery. Now I can't do nandroid backup or root the device either i need help. The data speed is too slow at my home I'll not be able to download stock rom (it would take days to download)... Is there any way??
smartananallavan said:
I Am unable to mount system or cache either and also i cant flash certain files from my CWM recovery I think it is because I forgot to root my device before flashing the CWM from stock recovery. Now I can't do nandroid backup or root the device either i need help. The data speed is too slow at my home I'll not be able to download stock rom (it would take days to download)... Is there any way??
Click to expand...
Click to collapse
Recovery Mode doesn't need root to function. Try the Universal GB Root package and tell me what happens, a bit more information would be helpful, like, if an error shows, or something like that...
EDIT: OH! I just realized what is happening! You are using CWM with a Stock ROM that you want to root, right? Well, CWM does NOT support .EFS file systems. It can't mount the /system/ partition to write on it. When you install a custom ROM with it, it re-formats the system partition to EXT4. So, you can't use both a Stock ROM and CWM. They do not support each other. You need to flash a custom ROM. Or use the Stock Recovery to flash the Root Zip.
another trouble.....
thanks i figured that out but also now there is another problem...please help me.
I downloaded the stock rom and it has only two files ( a .dll and an file HOME.tar) but i loaded the file as PDA in
odin and now there comes the problem.... the drivers are setup and the ID:COM section turns yellow and then in the
logs everything proceeds good and gets stuck at the setupconnection stage. I'll try to post the screen shot
smartananallavan said:
thanks i figured that out but also now there is another problem...please help me.
I downloaded the stock rom and it has only two files ( a .dll and an file HOME.tar) but i loaded the file as PDA in
odin and now there comes the problem.... the drivers are setup and the ID:COM section turns yellow and then in the
logs everything proceeds good and gets stuck at the setupconnection stage. I'll try to post the screen shot
Click to expand...
Click to collapse
Ok, i'll wait for the screenshot =)
Also, this is a first i have ever heard of this problem. If the drivers are OK, Odin is showing the COM Port, and the Setup begins, my only guess is that you got the wrong flash files... Are you sure you'r device is "s5670"? not some other model? Also, i recommend downloading official firmware from SamFirmware. But for now, i wait for screenie =)
smartananallavan said:
thanks i figured that out but also now there is another problem...please help me.
I downloaded the stock rom and it has only two files ( a .dll and an file HOME.tar) but i loaded the file as PDA in
odin and now there comes the problem.... the drivers are setup and the ID:COM section turns yellow and then in the
logs everything proceeds good and gets stuck at the setupconnection stage. I'll try to post the screen shot
Click to expand...
Click to collapse
Don't load it as PDA, instead load it as One Package(home.tar.md5 file)
my samsung doesnt open
i tried to install cyanogen 10.4.1 jelly bean to my galaxy fit but i didnt root it first i realized that later and it couldnt wipe and couldnt install the update. the problem is that it doesnt open any more. it stays at galaxy fit screen what can i do to restore it?
Stay Calm Bro
koukis32 said:
i tried to install cyanogen 10.4.1 jelly bean to my galaxy fit but i didnt root it first i realized that later and it couldnt wipe and couldnt install the update. the problem is that it doesnt open any more. it stays at galaxy fit screen what can i do to restore it?
Click to expand...
Click to collapse
Hi @koukis32
Dnt wry Bro ur cell is just fine please download the Firmware pages that you want to flash from the link below by entering your phone model number or i shall also paste link where in you can download the package directly also.
You can find the required ODIN Firmware Package as you wish for the ODIN tool
http://www.sammobile.com/firmwares/ and put in the Device Model Number and download it
or complete Firmware Package of Gingerbread 2.3.6 DDKT3 you can find the link below
http://hotfile.com/dl/146050815/b3b9...2_INU.zip.html in case this link doesn't work please download the Packages from above link as I can't check it from my office so dntmnd
For ODIN Flashing Tool:
http://www.downloads.techdiscussion....ting-software/
and Procedure to Flash is:
- Shutdown Galaxy Fit and restart it in Recovery Mode. For that hold the volume down key + Home key and power key. Hold it for some seconds and leave it. The device will boot in recovery mode. When the yellow triangle, connect cell phone and a computer with a USB cable.
- Launch ODIN on your system. In that look under ID:COM section. The section will turn to yellow once the device is connected and detected.
- Now click on OPS. It will ask you to browse the downloaded firmware package. Browse to GIO_1.0.ops. Once it is selected click on One Package and choose S5670DDKT3_S5670ODDKT2_S5670DDKT2_HOME.tar.md5.
- Now click on Start. The update process has started and it will take few minutes to complete.
- Once it is done, the device will reboot itself. Later on you can go in Settings and checkout the firmware version.
And considering still you still in Galaxy Fit Page then go take a break and relax and follow the instructions in the link which I have shared you phone will come back to life.
http://www.androidauthority.com/how...xy-fit-s5670-android-2-3-4-gingerbread-35369/
follow the picture carefully.
:good::fingers-crossed::fingers-crossed::fingers-crossed:
AXAz0r said:
Ok, i'll wait for the screenshot =)
Also, this is a first i have ever heard of this problem. If the drivers are OK, Odin is showing the COM Port, and the Setup begins, my only guess is that you got the wrong flash files... Are you sure you'r device is "s5670"? not some other model? Also, i recommend downloading official firmware from SamFirmware. But for now, i wait for screenie =)
Click to expand...
Click to collapse
thaks for helping sorry for the long Delay. solved the problem!!!! just downloaded a stock deodexed rom.zip and flashed...... booted up fine
Whenever I attempt to flash a Cyanogenmod Rom for P3110 (Using that because I have a P3113) I get a Status 7 Error.
Anyone know how to fix this?
I use this to get the Rom: http://forum.xda-developers.com/showthread.php?t=2583316
Picture: http://prntscr.com/43qdlq
Zackpip said:
Whenever I attempt to flash a Cyanogenmod Rom for P3110 (Using that because I have a P3113) I get a Status 7 Error.
Anyone know how to fix this?
I use this to get the Rom: http://forum.xda-developers.com/showthread.php?t=2583316
Picture: http://prntscr.com/43qdlq
Click to expand...
Click to collapse
Flash the latest @Android-Andi Philz Touch or TWRP recovery and that should solve the problem (I recommend flashing the recovery with Odin or Heimdall.) Status 7 error usually means outdated recovery.
Link to @Android-Andi's recovery thread: http://forum.xda-developers.com/showthread.php?t=2548257
Sent from my SGH-T989
Well, that may have worked but before I did anything I let it charge, this is the message I got though: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
How should I go about this? I cannot do anything in Kies because the P3113 won't turn on. Whenever I plug it in to the PC if makes the sound of connecting, then disconnecting over and over again.
Zackpip said:
Well, that may have worked but before I did anything I let it charge, this is the message I got though: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
How should I go about this? I cannot do anything in Kies because the P3113 won't turn on. Whenever I plug it in to the PC if makes the sound of connecting, then disconnecting over and over again.
Click to expand...
Click to collapse
What exactly did you do that it did this? Did you attempt to flash the recovery in Odin or Heimdall? If Odin, which version?
Sent from my SGH-T989
Since the Cyanogenmod Rom failed flashing I tried to flash the stock firmware using Odin v.1.83 (Odin v3.09 and v3.07 wouldn't open) in order to get a Rom, then I tried to re-root it using v1.83, but it died when I was trying to. So, I decided to charge it and that's what happened. At least that's what I remember. My USB connector works but doesn't charge when connected to the PC, that's why it died. Other than that I do not believe anything else was done to it.
Zackpip said:
Since the Cyanogenmod Rom failed flashing I tried to flash the stock firmware using Odin v.1.83 (Odin v3.09 and v3.07 wouldn't open) in order to get a Rom, then I tried to re-root it using v1.83, but it died when I was trying to. So, I decided to charge it and that's what happened. At least that's what I remember. My USB connector works but doesn't charge when connected to the PC, that's why it died. Other than that I do not believe anything else was done to it.
Click to expand...
Click to collapse
OK, that makes more sense. If your device died during installation that will happen. If I use Odin, I usually use v1.85, but I have found Heimdall to be more stable and consistent. Can you boot into download mode?
Edit: also, what version of windows are you running?
Sent from my SGH-T989
jrc2 said:
OK, that makes more sense. If your device died during installation that will happen. If I use Odin, I usually use v1.85, but I have found Heimdall to be more stable and consistent. Can you boot into download mode?
Edit: also, what version of windows are you running?
Sent from my SGH-T989
Click to expand...
Click to collapse
I am using Windows 8.1. Sorry for the late reply, had a little Family Reunion.
Zackpip said:
I am using Windows 8.1. Sorry for the late reply, had a little Family Reunion.
Click to expand...
Click to collapse
There have been known problem using Odin on Windows 8, but I've done it multiple times. (I had kies installed if it makes any difference)
Anyway, do you have a Linux computer laying around somewhere? Depending on what happened during I installation, one can be used to maybe trip the device into a bootloop and then from there you can boot into recovery and flash a ROM. (I had to do this with my S2 after a power glitch while using Odin.) Odin isn't needed to root the tab. All you have to do us use Odin or Heimdall to flash a custom recovery (CWM or TWRP) and then flash SuperSU.zip in recovery.
Sent from my SGH-T989
jrc2 said:
There have been known problem using Odin on Windows 8, but I've done it multiple times. (I had kies installed if it makes any difference)
Anyway, do you have a Linux computer laying around somewhere? Depending on what happened during I installation, one can be used to maybe trip the device into a bootloop and then from there you can boot into recovery and flash a ROM. (I had to do this with my S2 after a power glitch while using Odin.) Odin isn't needed to root the tab. All you have to do us use Odin or Heimdall to flash a custom recovery (CWM or TWRP) and then flash SuperSU.zip in recovery.
Sent from my SGH-T989
Click to expand...
Click to collapse
I do not have a Linux machine anywhere.. Would that be the only way to fix it?
Zackpip said:
I do not have a Linux machine anywhere.. Would that be the only way to fix it?
Click to expand...
Click to collapse
Not necessarily but it was just what I used and what worked. Does Odin detect the device on the firmware upgrade encountered an error screen?
Sent from my SGH-T989
jrc2 said:
Not necessarily but it was just what I used and what worked. Does Odin detect the device on the firmware upgrade encountered an error screen?
Sent from my SGH-T989
Click to expand...
Click to collapse
What do you mean by that? Odin shows this when I plug it in: http://prntscr.com/44yzf2
Nothing looks out of the ordinary.
Zackpip said:
What do you mean by that? Odin shows this when I plug it in: http://prntscr.com/44yzf2
Nothing looks out of the ordinary.
Click to expand...
Click to collapse
Odin does detect the device. So you SHOULD be able to go to www.samfirmware.com , click on "Firmware Database" and select the options in the drop down boxes for your tablet. Download the zip file (you'll need a sammobile account) and then extract the zip file. You should have a tar.md5 or a tar file that you can flash in Odin. Make sure your tab is charged and you run Odin as admin. After you flash that, reboot into recovery (will be stock recovery) and do a factory reset and wipe cache. Now you should be able to reboot into stock android (with TouchWIZ of course). To root from here, use Odin to flash latest @Android-Andi TWRP recovery and the flash @Chainfire's SuperSU.zip and you'll be rooted!
As always, I am not responsible for what happens to your device. Doing this will raise your flash counter and void your warranty, which is probably void already if you flashed anything before.
Sent from my SGH-T989
jrc2 said:
Odin does detect the device. So you SHOULD be able to go to www.samfirmware.com , click on "Firmware Database" and select the options in the drop down boxes for your tablet. Download the zip file (you'll need a sammobile account) and then extract the zip file. You should have a tar.md5 or a tar file that you can flash in Odin. Make sure your tab is charged and you run Odin as admin. After you flash that, reboot into recovery (will be stock recovery) and do a factory reset and wipe cache. Now you should be able to reboot into stock android (with TouchWIZ of course). To root from here, use Odin to flash latest @Android-Andi TWRP recovery and the flash @Chainfire's SuperSU.zip and you'll be rooted!
As always, I am not responsible for what happens to your device. Doing this will raise your flash counter and void your warranty, which is probably void already if you flashed anything before.
Sent from my SGH-T989
Click to expand...
Click to collapse
Well, that partially worked. It does not show that anymore and it shows the Charging animation, but I can not boot into Odin/Download mode, or Recovery mode.
Zackpip said:
Well, that partially worked. It does not show that anymore and it shows the Charging animation, but I can not boot into Odin/Download mode, or Recovery mode.
Click to expand...
Click to collapse
That is quite weird. I have done the same thing at least 2 or 3 times. Try going to https://builds.casual-dev.com/jodin3/ Make sure you plug in your device before loading the above page. Your device should be detected when the page loads. In PDA put the latest TWRP tar file. Click start. It will say something like it needs a pit file and will reboot to find it. Click OK. It might fail but thats fine. Unplug your device. It will reboot and should show a bootloop. Now you should be able to reboot into recovery. If not, you might have to JTag but I don't know. For future reference, if a ROM is bootlooping, don't flash stock in Odin. Just do a full wipe and reflash the ROM and that should fix it.
Sent from my SGH-T989
EDIT: if the tab died during installation of an important file, it can ruin the device. www.mobiletechvideos.com does have JTAG service that can be used as a last resort. It costs around 50 US Dollars.
jrc2 said:
That is quite weird. I have done the same thing at least 2 or 3 times. Try going to https://builds.casual-dev.com/jodin3/ Make sure you plug in your device before loading the above page. Your device should be detected when the page loads. In PDA put the latest TWRP tar file. Click start. It will say something like it needs a pit file and will reboot to find it. Click OK. It might fail but thats fine. Unplug your device. It will reboot and should show a bootloop. Now you should be able to reboot into recovery. If not, you might have to JTag but I don't know. For future reference, if a ROM is bootlooping, don't flash stock in Odin. Just do a full wipe and reflash the ROM and that should fix it.
Sent from my SGH-T989
EDIT: if the tab died during installation of an important file, it can ruin the device. www.mobiletechvideos.com does have JTAG service that can be used as a last resort. It costs around 50 US Dollars.
Click to expand...
Click to collapse
I used Odin to re-download the stock firmware, and that worked. Thank you so much for all your help, it is working now!
Zackpip said:
I used Odin to re-download the stock firmware, and that worked. Thank you so much for all your help, it is working now!
Click to expand...
Click to collapse
So you mean you redownloaded the firmware from sammobile and flashed with Odin or what? I couldn't figure out exactly what you meant. Glad to hear your tab is working again!
Sent from my SGH-T989
jrc2 said:
So you mean you redownloaded the firmware from sammobile and flashed with Odin or what? I couldn't figure out exactly what you meant. Glad to hear your tab is working again!
Sent from my SGH-T989
Click to expand...
Click to collapse
Yes, I did exactly that.
Zackpip said:
Yes, I did exactly that.
Click to expand...
Click to collapse
So it must have been a bad download then. You used Odin v1.87 or what? Also, you should add [SOLVED] to the thread title.
Sent from my SGH-T989
My S6 only goes into odin/download mode, I have tried multiple times trying to flash the stock rom using different versions of odin and different versions of the stock rom just to be sure. I never rooted the phone but I read that you dont need to be rooted or in debugging mode to use odin. Everytime I have used odin it stops after nand write start. I have tried to root if using cf auto root but that failed as well. I have tried renaming the tar.md5 into just tar and extracting the files (never once found hidden.img though), recompiled them to make new tar files and tried booting them individually but still no luck. I really have no idea what I am doing wrong or why this phone will not flash the stock firmware. Even smart switch wont work, so I cant go into recovery mode to manually wipe the phone. The model number is the G920W8.
Any help or new ideas would be appreciated.
restore stock and take it back to the store. i had the same problem too. new one coming soon.
smiley45 said:
restore stock and take it back to the store
Click to expand...
Click to collapse
That's all I've been trying to do. Just restore the stock firmware. My problem is that it won't restore to stock. Neither through Odin or smart switch.
Also my battery does not charge, that was the original problem.
murph123 said:
That's all I've been trying to do. Just restore the stock firmware. My problem is that it won't restore to stock. Neither through Odin or smart switch.
Click to expand...
Click to collapse
did you get this to restore?
smiley45 said:
did you get this to restore?
Click to expand...
Click to collapse
No still no luck. Any suggestions?
murph123 said:
No still no luck. Any suggestions?
Click to expand...
Click to collapse
try to flash android 5.1.1. for your phone model if you can get into twrp. do a full phone wipe. and a factory restore. then flash android 5.1.1 thru odin. you should be good to go. if you are still having boot loops let the phone die completely and wait for 10 min to 15 min. you may need to do this few times but i did this and it works for me let my know what happens. ( you might need to stay in download mode until the phone dies)
some times the answer is more simple as expected, try another usb port, or maybe another computer ...
http://forum.xda-developers.com/galaxy-s6/help/how-to-unbrick-samsung-galaxy-s6-100-t3378857 read my post mate it helped me
murph123 said:
My S6 only goes into odin/download mode, I have tried multiple times trying to flash the stock rom using different versions of odin and different versions of the stock rom just to be sure. I never rooted the phone but I read that you dont need to be rooted or in debugging mode to use odin. Everytime I have used odin it stops after nand write start. I have tried to root if using cf auto root but that failed as well. I have tried renaming the tar.md5 into just tar and extracting the files (never once found hidden.img though), recompiled them to make new tar files and tried booting them individually but still no luck. I really have no idea what I am doing wrong or why this phone will not flash the stock firmware. Even smart switch wont work, so I cant go into recovery mode to manually wipe the phone. The model number is the G920W8.
Any help or new ideas would be appreciated.
Click to expand...
Click to collapse
Try to flash a costum rom with twrp