Hey whiz kids,
I upgraded to a new NIghtly cm-10.1 for my tf300t through the custom roms app. Problem is I didn't have a upgraded bootloader, it could be as old as honeycomb I don't know. Whats happening now is a the first Asus screen loads up and its just frozen there permanently until the device dies. I can get into RCK and Fastboot. Apparently I don't have a backup either. What are my options?
GoinGorillazzz said:
Hey whiz kids,
I upgraded to a new NIghtly cm-10.1 for my tf300t through the custom roms app. Problem is I didn't have a upgraded bootloader, it could be as old as honeycomb I don't know. Whats happening now is a the first Asus screen loads up and its just frozen there permanently until the device dies. I can get into RCK and Fastboot. Apparently I don't have a backup either. What are my options?
Click to expand...
Click to collapse
Whoops, sneezed and clicked the Thanks button. Oh well... you have my thanks.
Load a stock ROM on you microSD (available on ASUS' support website), and flash it from recovery. This should update your bootloader in addition to flashing a bootable ROM. Then, reflash CM's nightly.
It might be better to ask in the 300T section in case there's any slight idiosyncrasy's that differ from the TF700T.
Marty is right though you should be able to flash back to ICS and start over with an unlocked bootloader.
Appreciate the comments back..thanks. I tried the suggested idea, however, the microsd card inserted on the side of the tablet doesnt have an option in recovery to open up and view the files. The only option I have is to look through the internal usb storage drive, since I cant connect the tab to my computer in an way I tried so far, I cant get an old rom into the internal drive.?? Its just frozen on the asus bootloader screen and wont even turn off lol.
GoinGorillazzz said:
Appreciate the comments back..thanks. I tried the suggested idea, however, the microsd card inserted on the side of the tablet doesnt have an option in recovery to open up and view the files. The only option I have is to look through the internal usb storage drive, since I cant connect the tab to my computer in an way I tried so far, I cant get an old rom into the internal drive.?? Its just frozen on the asus bootloader screen and wont even turn off lol.
Click to expand...
Click to collapse
Hold down the power button long enough will enventually turn off the device. Make sure it off first then boot into recovery and see if you can access your sdcard. If not working hookup usb cable between pc and your device, boot into recovery (home page), then open adb on your pc and make sure the rom file is in the same directory of your adb command, on your pc run this command to copy file to your internal memory:
adb push c:\folder_where_adb_and rom_zipfile\rom.zip /sdcard
OK..I sent the file using adb push it took like 90secs and it confirmed the asus jellybean firmware (10.4.2.16) file at 100mb. Only problem is is that its not showing up in the sdcard. There are just a bunch of folders with no new .zip files.?? I dont understand why the file wouldn't show up after it says it sent it.
Which custom recovery are you using? Sounds like you need to re-do it from a PC when in fastboot mode ( choose USB icon in boot loader ). Make sure you use the latest TWRP or CWM as they both read the card fine.
GoinGorillazzz said:
Hey whiz kids, I can get into RCK and Fastboot.
Click to expand...
Click to collapse
If you are at RCK what happens when you press then release (and wait) volume + (up)?
Shamelessly ripped from Pretoriano80's excellent summary thread from here:
http://forum.xda-developers.com/showthread.php?t=1833212
I copied it here because I wanted to point out the rename step that's needed if you're on stock recovery somehow. I too am curious as to what recovery is active on your system...
*** Factory Restore after a softbrick/Downgrade from Jelly Bean to ICS/Clean Factory Restore ***
When You Need This?
* if you get stuck on Asus boot screen (the one with the spinning wheel)
* If you don't like JB and you want ICS back
* if you want to get back to a clean stock firmware
Note: You need to have a working recovery (stock or custom) in order to use this method.
========= Recover /Downgrade from Jelly Bean to ICS/Clean Factory Restore with stock recovery =========
1) Download the latest firmware from Asus site (based os your SKU,eg. ww 9.4.5.26 * to downgrade from Jelly Bean you need the 9.4.5.30 firmware)
2) Extract the .zip file somewere on your desktop (the result will be another .zip file,use it for step 3)
3) Rename the extracted archive to "EP201_768_SDUPDATE.ZIP" (without the " ") and upload it to a MicroSD card
4) Insert the MicroSD card in your tablet and use this button combination to Power ON and go to recovery --> Start the tablet by pressing Volume Down and POWER togheter for 5 seconds ,a message will inform you that you have 5 seconds to enter the recovery,press Volume UP before the 5 seconds expire.
At this point the device will go in recovery and should start updating your firmware .
Note: Keep in mind that Windows doesn't show the known file extensions so most users don't have to put the .ZIP extension in the filename.
========= Recover /Downgrade from Jelly Bean to ICS/Clean Factory Restore with custom recovery =========
1) Download the latest firmware from Asus site (based os your SKU,eg. ww 9.4.5.26 * to downgrade from Jelly Bean you need the 9.4.5.30 firmware)
2) Extract the .zip file somewere on your desktop
3)Rename the file to something like "recover.zip" uploade it to the root of your MicroSD card
4) Insert the MicroSD card in your tablet and use this button combination to Power ON and go to recovery --> Start the tablet by pressing Volume Down and POWER togheter for 5 seconds ,a message will inform you that you have 5 seconds to enter the recovery,press Volume UP before the 5 seconds expire
5) From the recovery menu press Install and select the "recover.zip" file ...wait until the install process ends and then restart your device.
Note: Keep in mind that Windows doesn't show the known file extensions so most users don't have to put the .zip extension in the filename.
Huawei Honor 2 U9508
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So this is the easiest and the safest way to upgrade your phone (new ROM Android), install GAPPS and Root.
I have done this with (B544) and (B550) U9508_EmotionUI_1.5_V100R001CHNC00B550 Android 4.1.2, so you also can do this with B628 and B629 and others:
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=47
Here is B107 Stable (Android 4.0.4):
http://download-c.huawei.com/download/downloadCenter?downloadId=13991&siteCode=worldwide
MEGA: https://mega.nz/#!29glQa4R!dXLed1nlDMDYZxqSQPYXqf9HVatqHxzkW4dcPIMbUxE
Here is B509 Stable (Android 4.1.2 with EmotionUI 1.5) with Google Play Store and Multi language:
www.huaweidevices.de/getAttachment.php?file=U9508_V100R001C00B509.zip&force=true
MEGA: https://mega.nz/#!qkYGCJqI!vmD7eaGEMB7KBnf8_HCka08tw5dfIKKz0uwHBhUCkeg
B509 is the same as B550, but then with Google Play Store and Multi language
Here is B703 Stable (Android 4.2.2 with EmotionUI 1.6) with Google Play Store and Multi language:
www.huaweidevices.de/getAttachment.php?file=HUAWEI_Ascend_G615_Emotion_UI_SD_Card_Update.zip&force=true
MEGA: https://mega.nz/#!T1YgSToC!65sIKjnUVxz9Fkt_LvPd5ssoBOd4gqjCSe3dcvLCTtU
Here is B704 Stable (Android 4.2.2 with EmotionUI 1.6):
MEGA: https://mega.nz/#!jxAGAZjL!sgx5mPPsON1lvLEZx_QqzkBMac6PzfIXP2RsXpGRxVU
Here is B706 Beta (Android 4.2.2 with EmotionUI 1.6), it has the Bluetooth fix and Volume fix:
www.emui.com/nsp/geturl.php?path=U9508_EmotionUI_1.6_V100R001CHNC00B706.zip&rid=252
MEGA: https://mega.nz/#!P4Q2TIBI!ig5UAixOHTBE07oT2IDrKeO2t7MQyrcrXF_jpAyK1-4
Here is B709 Stable (Android 4.2.2 with EmotionUI 1.6)it has the Bluetooth fix with bluetooth auto connect without awaking the device and Volume fix:
www.emui.com/nsp/geturl.php?path=U9508_EmotionUI_1.6_V100R001CHNC00B709.zip&rid=384
MEGA: https://mega.nz/#!3hIzFBST!lj9xw5zw0C24R3KJwvTRXYYQ70xQgjQur8qOzAN-kDM
Here is B804 Stable (Android 4.2.2 with EmotionUI 2.0):
www.emui.com/nsp/geturl.php?path=U9508_EMUI_2.0_V100R001CHNC00B804.zip&rid=513
MEGA: https://mega.nz/#!TsoXGYba!bLemytfZedBa7lgaqP6EUlN37A-Va4V-xrL3jjKmMjU
First update to B709 and then do a Factory data reset and a Erase internal storage (do not forget to make a copy of the backup (HuaweiBackup) on your computer or SD Card) and
then flash it to B804.
Ow and before you install a new Firmware on your phone, you first use the App Back-up to backup all your Apps (including Google Play Store and Google Play-services)
and contacts and SMS and more, then you installed the new Firmware.
Then you used Back-up again and installed all your Apps back on your phone including Google Play Store and Google Play-services, and now Google Play works and
you do NOT have to install Chinese recovery, so if you had a old Firmware on your phone before you installed the New Firmware, you do not need Chinese
recovery, just use the App Back-up that came with the Firmware.
You don't need Chinese recovery to root your phone.
Ow and you need to press 7 times on the build number to see developers settings, in B7*** and above.
And put a copy of your backup on a Computer, and on your SD-Card if the App have not done that already.
You have to sign into gapps before the backup app will allow the option to backup google services.
Here is recovery6.0.1.9_AscendHonor2.exe:
https://mega.nz/#!fhZRzYDa!UbsyaMmDtUrbUa0tozjdQVsLM6u36q1VnUfNGO-Frys
Here is Motochopper:
http://www.mediafire.com/?f4lipgd1hh3jug2
Here is AnzhiRoot_U9508:
https://mega.nz/#!fpJSwDAa!v0UpoAmYK58_z-JCqDWY-JWV0FBFGmzBp7HXi_0frJY
Here is Genotools:
https://mega.co.nz/#!d0cknTIC!3j0dMKVNSy2TOmQBO7ToAlvkfZNdGCKeI6-tyLM6KQ0
Here is Root Genius:
https://mega.nz/#!G1Z1gQjI!PrLVCBW0yyd7N4EMw96F2v-SGvrlpj6jcWO2mVHeE7I
GAPPS
http://goo.im/gapps/gapps-jb-20121011-signed.zip Android 4.1.2.
https://mega.co.nz/#!0lUkgYqL!LtoCVV5nbbb7WOxbi4J3HAFWnGUlz2KxjslfoeVFRkw Android 4.2.2.
Here is SuperSU 0.99:
http://forum.xda-developers.com/attachment.php?attachmentid=1707684&d=1360134287
This is how you Replace Chinese Recovery with original recovery
1. Go to Settings and go to Developer options, and enable USB debugging.
2. Plug the phone in the computer, and Choose USB storage device (or Media device (MTP).
3. Restart phone and boot phone with Power & - volume
4. Open Recovery6.0.1.9_AscendHonor2.exe.
5. Now press 2 for The original recovery (1 is Chinese recovery), and press Enter.
6. If all is OK, the program will do its job and Reboot into FASTBOOT MOD, then he Flash the selected recovery and then he reboot the device 2 times.
7. Now your selected recovery have been installed.
Before starting the firmware you need to have:
If you unlocked the boatloader you cannot use official updates (Firmwares) from Huawei.
1. SD card of at least 2GB
2. Phone with a charged battery at least 50%
1. Plug the phone in the computer.
2. Unpack the archive with the firmware and throw dload folder to the root of the memory card.
3. Unplug the phone from the computer.
4. In the phone menu - Settings - Storage - Software Update - SD card Upgrade (or Settings - About phone -
System update - (Local update) Update via SD Card).
5.The phone will reboot and begin the upgrade process and you will see the following picture (be patient it can take a few minutes).
If you see a lot of Chinese letters after you boot, it means that you have installed Chinese recovery with recovery6.0.1.9_AscendHonor2.exe,
and you have to replace Chinese Recovery like you see above.
First backup all your Apps and your Massages and Browser history and Call logs and more with Back-up,
thats a App that came with your phone.
After the update the phone will reboot and start (also be patient).
Google Play Store
1. Connect phone to computer, (first install the Huawei USB Drivers) then put
GAPPS on you intern or extern Storage, now power down phone.
2. Power up your phone whilst holding Power & - volume.
3. Now your phone should be stuck in the "Huawei Ascend" logo, now connect to computer and run recovery6.0.1.9_AscendHonor2.exe
and press 1 and enter.
Then if he ask something about 1 and 2 option, and nothing happens do this:
Press CTRL+C then N. And it should start.
Make sure fastboot is OFF and USB debugging is ON
4. Now you should have custom recovery (woo), disconnect usb and remove battery.
5. put battery in and boot phone with Power & + volume.
6. So now you notice everythings chinese MYGOOOD, so do this:
Menu button 2 --> Menu button 1 [zip from internal memory]
Menu button 2 --> Menu button 4 [zip from external memory]
And select your GAPPS zip file.
Then a few seconds later GAPPS (Google Plays Store) is installed.
Then go back, Menu button 5 and then press menu button 1 (this will boot your phone).
Root your Phone
There are 4 ways you can Root this phone, first one is with Motochopper, and the second one is with AnzhiRoot_U9508, and the third is with Genotools,
and the fourth is with Chinese Recovery 6.0.1.9, do not forget to install the Huawei USB Drivers, and also HiSuite is useful to have.
It's easer with Motochopper and AnzhiRoot_U9508 and Genotools .
Motochopper
Instructions:
1. Download the file (Motochopper) to your PC.
2. Extract the entire contents of the zip file.
3. If you are using Windows, ensure you have installed the latest Huawei USB Drivers) available for your phone.
4. Connect phone to computer ensure USB Debugging mode is enabled on your device.
5. If you are using Windows, navigate to the extracted directory and execute “run.bat”. If you are using Linux or OS X, navigate to the extracted
directory in a terminal and execute “./run.sh”.
AnzhiRoot_U9508
1. connect dev to pc (usb debuging on)
2. run program
3. press one button "root"
Don't forget to restart your phone.
warnings: Dr.Web determines such program as virus (Tool.Rooter.18.origin)
Genotools
1. Connect your phone to your computer via a USB cable, select HiSuite.
2. Run GenoTool.
3. Go to tab 4.
4. Click "Root 1"
Root Genius
Works good with B804
1. Enable USB Debugging on your Android Sartphone.
2. Open Root Genius on your Windows Computer.
3. Once Roor Genius has started, connect your smartphone to the computer with USB Cable.
4. Once your smartphone is connected succsessfully to the Computer, Root genius will automatically detect your Smart phone.
5. Now click on the Root Now button to begin the rooting process.
6. Now Root Genius will Automatically Root your Smartphone and install KingUser App.
7. Now your smartphone is Rooted.
Chinese Recovery
Only works if you installed recovery6.0.1.9_AscendHonor2.exe, like you see above.
Download and copy CWM-SuperSU-v0.99.zip (or any similar SuperSU) to your SD Card.
Shutdown your phone, restart by pressing Power + Volume Up buttons until you enter CWM screen.
Menu button 2 --> Menu button 1 [zip from internal memory]
Menu button 2 --> Menu button 4 [zip from external memory]
And select CWM-SuperSU-v0.99.zip file.
Then a few seconds later CWM-SuperSU-v0.99.zip (SuperSU 0.99) is installed.
Then go back, Menu button 5 and then press menu button 1 (this will reboot your phone).
Pleas note that, you only get your phone rooted after this.
Removing Chinese apps
Only works if you have Rooted your Phone.
1. Download Root App Delete and start it.
2. Now select System Apps and then select ProMode
3. Now select the App and select Uninstall.
4. thats all now the App is uninstalled and is gone from your phone.
If Root App Delete don't work use Final Cleaner & Task Killer
I have done it and it's very easy, if you already had MoreLocale 2 on your phone and selected your language then he will go to your language
in a view clicks, and if you had English in settings then you also still will have that, also with ADW.Launcher or (i hear better) with
Apex Launcher you have your App Drawer and more back.
Why is my notification bar (panel) gone?
To have a working notification bar, there are a few conditions to be achieved by the rom:
-the file cust/channel/*countryname*/xml/hw_defaults.xml must contain two lines:
<integer toolBoxSwitch="1"/>
<string toolBoxDisplayWidgetNameArray="com.huawei.android. toolbox,com.huawei.android.toolbox.ToolBoxProvider "/>
-the file system/build.prop must contain the line: ro.config.hw_toolbox=true
-the updater-script must contain the correct symlink, like: symlink("/cust/channel/cn", "/data/cust");
When using an original update from a country different than the phone's country, there is no symlink made, so all the files in the cust partition are not
seen by the phone, which leads to no notification bar and other issues!
In a custom rom the symlink is forced in the updater-script, so if everything else is ok, everything works!
Also, if someone flash a rom of Batty86 for example, and clean data after flashing, the symlink leads to a deletion of the cust partition, so again we have
no notification bar and so on.
I hope it's a bit more clear now.
Change languages without morelocale2
To get more languages without morelocale2, you can look for /сust/channel/cn/xml/hw_defaults.xml on your phone (use Root Browser to select file).
Now go about 60% down till you are at Phone related, and then you will see:
<string white_languages="zh_CH,en_US"/>
And put between en_US and "/> your language you want, en_GB is British English language, fr_FR is French language, de_DE is German language, and so on and so on.
So if you want your Phone to be French you have to do this <string white_languages="zh_CH,en_US,fr_FR"/>
And also do that with:
<!--string white_languages="zh_CH,en_US"/-->
Wipe data/factory reset the phone once again, and you should have more languages at your disposal.
SO now you can choose your language, and never have to use morelocale2 anymore (until you reflash your Firmware of course).
You need root access for this.
Good luck everybody.
With thanks to maikzen, for how to flash GAPPS and octop and soudy1994 and Pimorez and vkukfor and androidxda how to Root and Batty86 for why the notification bar (panel) is gone.
And the caller ID its works on Android 4.1.2 ?
AmigaWolf said:
So this is the easiest way to upgrade your phone (new ROM Android), install GAPPS and Root, it's the safest.
I have don this with (B544) U9508_EmotionUI_1.5_V100R001CHNC00B544 Android 4.1.2, so you also can do this with B605 and B610 and B615 others:
http://cn.ui.vmall.com/emotiondownload.php?type=%E8%8D%A3%E8%80%80%E5%9B%9B%E6%A0%B8
Here are GAPPS:
http://goo.im/gapps/gapps-jb-20121011-signed.zip
Here is SuperSU 0.99:
http://forum.xda-developers.com/attachment.php?attachmentid=1707684&d=1360134287
Before starting the firmware you need to have:
1. SD card of at least 2GB
2. Phone with a charged battery at least 50%
1. Unpack the archive with the firmware and throw dload folder to the root of the memory card.
2. Turning off the phone from the computer.
3. In the phone menu - Settings - Storage - Software Update - SD card Upgrade (or Settings - About phone - System update - Update via SD Card).
4.The phone will reboot and begin the upgrade process and you will see the following picture.
After the update the phone will reboot and start.
Google Play Store
1. Connect phone to computer, (first install the Drivers) then put GAPPS on you intern or extern Storage, now power down phone.
2. Power up your phone whilst holding Power & - volume.
3. Now your phone should be stuck in the "Huawei Ascend" logo, now connect to computer and run recovery6.0.1.9_AscendHonor2.exe and press 1 and enter.
4. Now you should have custom recovery (woo), disconnect usb and remove battery.
5. put battery in and boot phone with Power & + volume.
5. So now you notice everythings chinese MYGOOOD, so do this:
Menu button 2 --> Menu button 1 [zip from internal memory]
Menu button 2 --> Menu button 4 [zip from external memory]
And select your GAPPS zip file.
Then a few seconds later GAPPS (Google Plays Store) is installed.
Then go back, Menu button 5 and then press menu button 1 (this will boot your phone).
Root your Phone
Download and copy CWM-SuperSU-v0.99.zip (or any similar SuperSU) to your SD Card.
Shutdown your phone, restart by pressing Power + Volume Up buttons until you enter CWM screen.
Menu button 2 --> Menu button 1 [zip from internal memory]
Menu button 2 --> Menu button 4 [zip from external memory]
And select CWM-SuperSU-v0.99.zip file.
Then a few seconds later CWM-SuperSU-v0.99.zip (SuperSU 0.99) is installed.
Then go back, Menu button 5 and then press menu button 1 (this will boot your phone).
Pleas note that, you only get your phone rooted after this.
I have don it and it's very easy, if you already had MoreLocale 2 on your phone and selected your language then he will go to your language in a view clicks, and
if you had English in settings then you also still will have that, also with ASW Launcher you have your App Drawer and more back.
Good luck everybody.
With thanks to maikzen, for how to flash GAPPS and octop for how to Root
Click to expand...
Click to collapse
And the caller ID its works on Android 4.1.2 ?
Here in my Cellphone didn't work, the cellphone was in my google account contatcs and show "Unknown Number" when someone calls me ...
I dont know what it is !
AmigaWolf said:
So this is the easiest way to upgrade your phone (new ROM Android), install GAPPS and Root, it's the safest.
I have don this with (B544) U9508_EmotionUI_1.5_V100R001CHNC00B544 Android 4.1.2, so you also can do this with B605 and B610 and B615 others:
http://cn.ui.vmall.com/emotiondownload.php?type=%E8%8D%A3%E8%80%80%E5%9B%9B%E6%A0%B8
Here are GAPPS:
http://goo.im/gapps/gapps-jb-20121011-signed.zip
Here is SuperSU 0.99:
http://forum.xda-developers.com/attachment.php?attachmentid=1707684&d=1360134287
Before starting the firmware you need to have:
1. SD card of at least 2GB
2. Phone with a charged battery at least 50%
1. Unpack the archive with the firmware and throw dload folder to the root of the memory card.
2. Turning off the phone from the computer.
3. In the phone menu - Settings - Storage - Software Update - SD card Upgrade (or Settings - About phone - System update - Update via SD Card).
4.The phone will reboot and begin the upgrade process and you will see the following picture.
After the update the phone will reboot and start.
Google Play Store
1. Connect phone to computer, (first install the Drivers) then put GAPPS on you intern or extern Storage, now power down phone.
2. Power up your phone whilst holding Power & - volume.
3. Now your phone should be stuck in the "Huawei Ascend" logo, now connect to computer and run recovery6.0.1.9_AscendHonor2.exe and press 1 and enter.
4. Now you should have custom recovery (woo), disconnect usb and remove battery.
5. put battery in and boot phone with Power & + volume.
5. So now you notice everythings chinese MYGOOOD, so do this:
Menu button 2 --> Menu button 1 [zip from internal memory]
Menu button 2 --> Menu button 4 [zip from external memory]
And select your GAPPS zip file.
Then a few seconds later GAPPS (Google Plays Store) is installed.
Then go back, Menu button 5 and then press menu button 1 (this will boot your phone).
Root your Phone
Download and copy CWM-SuperSU-v0.99.zip (or any similar SuperSU) to your SD Card.
Shutdown your phone, restart by pressing Power + Volume Up buttons until you enter CWM screen.
Menu button 2 --> Menu button 1 [zip from internal memory]
Menu button 2 --> Menu button 4 [zip from external memory]
And select CWM-SuperSU-v0.99.zip file.
Then a few seconds later CWM-SuperSU-v0.99.zip (SuperSU 0.99) is installed.
Then go back, Menu button 5 and then press menu button 1 (this will boot your phone).
Pleas note that, you only get your phone rooted after this.
I have don it and it's very easy, if you already had MoreLocale 2 on your phone and selected your language then he will go to your language in a view clicks, and
if you had English in settings then you also still will have that, also with ASW Launcher you have your App Drawer and more back.
Good luck everybody.
With thanks to maikzen, for how to flash GAPPS and octop for how to Root
Click to expand...
Click to collapse
How can i get back my original bootloader ? in english ?
Because now i cant install original roms using dload folder and pressing + and - volume + power on start =(
how can i install my original rom again ?
Thanks
marcio carvalho moura said:
How can i get back my original bootloader ? in english ?
Because now i cant install original roms using dload folder and pressing + and - volume + power on start =(
how can i install my original rom again ?
Thanks
Click to expand...
Click to collapse
Sorry been sick almost the whole week, and i am still sick, but what do you mean How can i get back my original bootloader ? in english ?
What have happened, you have flash (B544) U9508_EmotionUI_1.5_V100R001CHNC00B544 like i have sad:
1. SD card of at least 2GB
2. Phone with a charged battery at least 50%
1. Unpack the archive with the firmware and throw dload folder to the root of the memory card.
2. Turning off the phone from the computer.
3. In the phone menu - Settings - Storage - Software Update - SD card Upgrade (or Settings - About phone - System update - Update via SD Card).
4.The phone will reboot and begin the upgrade process and you will see the following picture.
After the update the phone will reboot and start.
I do not know what is wronge with your caller ID because i still have caller ID after flashing to B544, and i don't use google account contacts because i like my privacy.
thank for share
:good::good::good::good::good::good::good::good:
Need help
I keep getting the error: Couldn't sign in. Can't establish a reliable data connection to the server
help please
Eustis said:
I keep getting the error: Couldn't sign in. Can't establish a reliable data connection to the server
help please
Click to expand...
Click to collapse
What sign in, which server with program??????
You don't give me any useful info, and i am no programmer i only know a view things, like how to update
your OS (Android) and GAPPS and Rooting.
tuananh5292 said:
:good::good::good::good::good::good::good::good:
Click to expand...
Click to collapse
Thank you for your Thanks, and good to hear that i could help you.
AmigaWolf said:
What sign in, which server with program??????
You don't give me any useful info, and i am no programmer i only know a view things, like how to update
your OS (Android) and GAPPS and Rooting.
Thank you for your Thanks, and good to hear that i could help you.
Click to expand...
Click to collapse
im sorry. I keep getting that error in google play store/every sign in needed google, for example youtube. I have tried many things to fix it, but none seem to work
i have emotion B537, rooted, and with gapps
Eustis said:
im sorry. I keep getting that error in google play store/every sign in needed google, for example youtube. I have tried many things to fix it, but none seem to work
i have emotion B537, rooted, and with gapps
Click to expand...
Click to collapse
Then it sounds more like you are typing your Password or User name wrong, had the same problem also once.
UPDATE: Have you ROOTED your phone, because GAPPS won't work without a rooted phone.
AmigaWolf said:
Then it sounds more like you are typing your Password or User name wrong, had the same problem also once.
UPDATE: Have you ROOTED your phone, because GAPPS won't work without a rooted phone.
Click to expand...
Click to collapse
yes its rooted.. and im sure its the right password... i have tried many accounts, even tried making a new one. still doesnt work
I have tried many things to fix it like these methods:
1- pull sim card
2- log into youtube, but it only comes to the same google login problem :S
3- factory reset
4- changing time
its really frustrating, i cant login to any google account, like youtube, playstore or gmail
Eustis said:
yes its rooted.. and im sure its the right password... i have tried many accounts, even tried making a new one. still doesnt work
I have tried many things to fix it like these methods:
1- pull sim card
2- log into youtube, but it only comes to the same google login problem :S
3- factory reset
4- changing time
its really frustrating, i cant login to any google account, like youtube, playstore or gmail
Click to expand...
Click to collapse
Then try to reinstall GAPPS, or try a different one, like a new one.
Or just put the newest Stable Emui on your phone like i have done B544, works perfect on my phone, so must also work on yours.
AmigaWolf said:
Then try to reinstall GAPPS, or try a different one, like a new one.
Or just put the newest Stable Emui on your phone like i have done B544, works perfect on my phone, so must also work on yours.
Click to expand...
Click to collapse
Could you show us some screenshots of the rom and how many Chinese things are on it.. thanks
PCTechRoss said:
Could you show us some screenshots of the rom and how many Chinese things are on it.. thanks
Click to expand...
Click to collapse
There are almost no Chinese things on it anymore, you can delete them almost all, and also disable them if you want.
Ok i will make some screen shots, and then put them here.
This is how MY B544 EmotionUI_1.5_V100R001CHNC00B544 Android 4.1.2 looks like.
So if you first install B544 it looks different, you can change everything you like, even how icons looks and so on.
AmigaWolf said:
So this is the easiest way to upgrade your phone (new ROM Android), install GAPPS and Root, it's the safest.
I have don this with (B544) U9508_EmotionUI_1.5_V100R001CHNC00B544 Android 4.1.2, so you also can do this with B605 and B610 and B615 others:
http://cn.ui.vmall.com/emotiondownload.php?type=%E8%8D%A3%E8%80%80%E5%9B%9B%E6%A0%B8
Here are GAPPS:
http://goo.im/gapps/gapps-jb-20121011-signed.zip
Here is SuperSU 0.99:
http://forum.xda-developers.com/attachment.php?attachmentid=1707684&d=1360134287
Before starting the firmware you need to have:
1. SD card of at least 2GB
2. Phone with a charged battery at least 50%
1. Unpack the archive with the firmware and throw dload folder to the root of the memory card.
2. Turning off the phone from the computer.
3. In the phone menu - Settings - Storage - Software Update - SD card Upgrade (or Settings - About phone - System update - Update via SD Card).
4.The phone will reboot and begin the upgrade process and you will see the following picture.
After the update the phone will reboot and start.
Click to expand...
Click to collapse
There is some little problem with installing the B605.
After i copy the dload folder to the sd card, turn off, then (Vol + Vol - and Power) or (Settings - Storage - Software Update - SD card Upgrade)
it boots into Geno mod screen, with a lot of Chinese ****.
something like 7-8 options.
All this, instead of installing the new B605...
BTW, now i'm on MIUI.
How to solve this? If i do get it right, the recovery of mine is not the original, coz once i've installed it via recovery6.0.1.9_AscendHonor2.
But now, i dont know how to rollback to original recovery....
Chopinko said:
There is some little problem with installing the B605.
After i copy the dload folder to the sd card, turn off, then (Vol + Vol - and Power) or (Settings - Storage - Software Update - SD card Upgrade)
it boots into Geno mod screen, with a lot of Chinese ****.
something like 7-8 options.
All this, instead of installing the new B605...
BTW, now i'm on MIUI.
How to solve this? If i do get it right, the recovery of mine is not the original, coz once i've installed it via recovery6.0.1.9_AscendHonor2.
But now, i dont know how to rollback to original recovery....
Click to expand...
Click to collapse
You have to ask maikzen about that, i just let people know how to flash there phone with B544 and B605 and B610 and B615, i don't
know how to rollback to original recovery.
I already have recovery installed. How do i remove it so i can upgrade fimeware to b544??
EDIT: i used the custom recovery installer and pressed 2 (install original recovery) And now when i try to upgrade it says FAILED or something like that in big letters. I also tried factory reseting from recovery and it says FAIL again. Please help. I also have gapps and superuser installed.. how do i remove it or how do i do a COMPLETE reset, delet gapps and superuser? I earlier tried resetting from settings, and it worked but gapps and superuser was still there
Eustis said:
I already have recovery installed. How do i remove it so i can upgrade fimeware to b544??
EDIT: i used the custom recovery installer and pressed 2 (install original recovery) And now when i try to upgrade it says FAILED or something like that in big letters. I also tried factory reseting from recovery and it says FAIL again. Please help. I also have gapps and superuser installed.. how do i remove it or how do i do a COMPLETE reset, delet gapps and superuser? I earlier tried resetting from settings, and it worked but gapps and superuser was still there
Click to expand...
Click to collapse
You have to ask maikzen about that, i just let people know how to flash there phone with B544.
So sorry i don't know, i had no problems installing B544, i also installed recovery6.0.1.9_AscendHonor2.exe and had no problem installing B544.
Maybe THIS will help you, it's don on a Huawei Ascend C881 but maybe it will work on this phone.
flyme
Hello is it possible here to request flyme os port for hh2 ??? or where should i ask ???))
lexeyd said:
Hello is it possible here to request flyme os port for hh2 ??? or where should i ask ???))
Click to expand...
Click to collapse
Maybe you can ask that here: http://forum.xda-developers.com/showthread.php?t=2039998&page=144
How to go back to stock ROM ?? (HUAWEI_Honor2_firmware(U9508,Android_4.0,V100R001C00B107,Normal,05011HWL).zip)
Settings->Storage->Software Upgrade->SD card Upgrade->Confirm->Upgrade option NOT there...
Can't find anything usable..
The recovery this one created for my and it works perfectly
Download this
https://www.dropbox.com/s/jbtsydi9iiq872q/Root DG800.zip
http://www37.zippyshare.com/v/82645339/file.html
Official Rom
https://drive.google.com/file/d/0B-eEVUUoOlT4bWI1MXRQcU5Fd28/preview?pli=1
Unzip the folder and will come out first and zip multiple folders
The zip-UPDATE-v1.99.zip SuperSU put it in the sd mobile
And also supersupro.apk
Unzip the second download and you create another folder with the rom files in img format
Replace this folder atchivo recovery by the recovery of the first zip folder.
Let the mess
SP_Flash_Tool_v3.1328.0.183 folder and open the flash file tool.exe
Pinchais where it says what you want to scatter and the scatter of the rom folder with recovery bajasteis already changed
When loading uncheck everything below minus recovery
You press F9, you will get a warning that if you say yes or (not in the pc and do not remember)
You turn off the phone, you remove the battery and do not you put it, connect the usb cable to mobile and pc and the bottom bar has to run when you get a green circle on the pc screen is made if it does bada is that drivers have no positions
(If you do not have the drivers positions see the device manager looking for the one with the yellow symbol, you say update search the computer, looking for the folder of the drivers of the first zip "All MTK USB Driver 2014" OK you the installed , if it runs the bar, if not disconnect and then reconnect the mobile)
Unplug the phone and put battery
Boot into recovery mode volume up + power until you start in the center of the screen out some small letters and an arrow moves to move volume volume up to select the option below the top.
In recovery install zip for sdcard to select with the power button and move the volume
Choose zip or something and look SuperSU-UPDATE-v1.99.zip
Click on the install it
Then go back and reset the root is already done
Install supersupro.apk
Open SuperSU and leave so
Settings:
Mark activate superuser
Mark survival mode
Uncheck re-authentication
Allow access by default
Uncheck display notifications
Access full content
Ready
To enjoy it guys, New phone and new root
Sorry for the tirade, so I did as soon as I arrived yesterday morning and so far everything perfect
http://www.htcmania.com/showthread.php?t=836832
I sit it for my English evil, it is not my mother language
busote said:
The recovery this one created for my and it works perfectly
http://www.htcmania.com/showthread.php?t=836832
I sit it for my English evil, it is not my mother language
Click to expand...
Click to collapse
http://devteam.vn/forum/rom-mod-cua...oot-recovery-rom-unbrick-all-in-one#post20874
Worked for me!
Thanks a lot for this information and for the recovery image!
Here is how I did it:
Download this
https://www.dropbox.com/s/jbtsydi9ii...ot DG800.zip
http://www37.zippyshare.com/v/82645339/file.html
I already had drivers for flashing from here (continue reading the thread to find how to install for Windows 8):
http://forum.xda-developers.com/showthread.php?t=2206421
I found the Doogee Dg800 Official ROM here:
http://www.doogeemobile.com/download
I also used the SPflash tool Doogee provides.
Then:
1) Extract the zip from the first (dropbox link) and put the file named UPDATE-SuperSU-v1.99.zip on your SD card.
2) Put the supersupro.apk on the SD card too.
3) Unzip the official Doogee ROM
4) I did not replace the recovery.img in the official ROM folder
5) Open SPFlash and open the scatter file via the FIle menu - for me this was called MT6582_Android_scatter.txt
6) By default all the entries that are loading will be selected (ticked)
7) Following this tutorial (http://www.gizbeat.com/3774/how-to-flash-cwm-without-root-with-sp-flash-tool/) for installing CWM I did:
- Unselect all (remove tick) except for the entry named RECOVERY
- Click on the entry (click on the word RECOVERY)
- Navigate to the recovery image provided in the first download
8) Click Download in SPFlash Tool
9) Turn off your phone
10) Remove the battery for a few seconds
11) Replace the battery but do not turn on the phone
12) Connect the phone via usb cable
13) The bar in SPFlash Tool should go red
14) It should then go yellow and load to the end
15) A green circle should pop up - success.
16) Disconnect you phone and hold Volume Up button and Power button till you go to recovery (hold for a while)
17) You see only three options - select the first one called "recovery". Up volume is for changing options down volume is to select.
18) Now you see the recovery menu - select the second option, using the down volume key, called "install zip from sdcard"
19) Select this with the power button
20) Select the first option in the new menu - it's called "choose zip from sdcard"
21) Scroll down to UPDATE-SuperSU-v1.99.zip and select it
22) Scroll down to the option that says "Yes - Install UPDATE-SuperSU-v1.99.zip
23) You will see it install, when it finishes, scroll to the bottom of the menu and select the "++Go Back++" until you get to the first menu
22) Select "reboot system now"
23) Install supersupro.apk
24) As suggested do the following:
- Open SuperSU and leave so
- Settings:
- Mark activate superuser
- Mark survival mode
- Uncheck re-authentication
- Allow access by default
- Uncheck display notifications (I want notifications so I did not do this)
- Access full content ( I don't think I saw this option)
Done!
Check for successful root using something like Root Checker Basic from app store.
I did this to solve GPS issues that I had with the phone, keep reading for how I solved those problems:
Problem: Applications could not connect to GPS
Solution: Reflash official ROM using this tutorial: http://forum.xda-developers.com/showthread.php?t=1982587
with drivers from: http://forum.xda-developers.com/showthread.php?t=2206421
New problem: GPS is poor and takes long to get a fix.
Solution: Follow this tutorial: http://www.gizbeat.com/2159/gizbeat-101-gps-not-working-on-mtk6589-mtk6577-mtk6575/
which basically comes down to installing and using FasterGPS
Trouble rooting DG800
Hi there
I have spent the last day trying to find a way to root my DG800 and finally came across this post which I see many say it seems to work. However i am a bit confused because for the life of me I can't find the zip-UPDATE-v1.99.zip folder anywhere. This is one of the first steps but I have downloaded and extracted the 3 links given at the top of this post. After extracting the first folder i get 3 more folders 'all mtk usb driver', 'Recovery' and 'SP_FLASH_TOOL_V3.1328.0.183'. As you can see neither of these files are called 'zip-UPDATE-v1.99.zip'. Where am I meant to find this folder that you are talking about? I have searched through every folder and subfolder that came in the downloaded files and I don't find this file you are talking about. I have tried to re download these links from different sources and still can't find that file. Have searched my entire computer and cannot find the file called 'zip-UPDATE-v1.99.zip'. Any help you can offer would be much appreciated.
Thanks
tantrumact said:
Hi there
I have spent the last day trying to find a way to root my DG800 and finally came across this post which I see many say it seems to work. However i am a bit confused because for the life of me I can't find the zip-UPDATE-v1.99.zip folder anywhere. This is one of the first steps but I have downloaded and extracted the 3 links given at the top of this post. After extracting the first folder i get 3 more folders 'all mtk usb driver', 'Recovery' and 'SP_FLASH_TOOL_V3.1328.0.183'. As you can see neither of these files are called 'zip-UPDATE-v1.99.zip'. Where am I meant to find this folder that you are talking about? I have searched through every folder and subfolder that came in the downloaded files and I don't find this file you are talking about. I have tried to re download these links from different sources and still can't find that file. Have searched my entire computer and cannot find the file called 'zip-UPDATE-v1.99.zip'. Any help you can offer would be much appreciated.
Thanks
Click to expand...
Click to collapse
i also cannot find it, hopefully you have found it lol i cant find the file anywhere!
question
one massive question i have with this thread is..... DOES ALL THIS FORMAT THE PHONE.
if so thats fine but it would be really handy to know
The file from the dropbox link disapeared Is there anybody who still has it, and can reshare it ?