I have problem on network disconnect and then show red cross sign next on battery indicator...
Tried manual search network, first network avalaible on 2G and then switched to 3G, but after few minutes the network became unavailable again..
Flashed with Searet radio.img also didn't help.
Fyi, i use Atrix2 on Indonesia (South East Asia) and all gsm network providers resulting same error.
Currently my stock ics system version 67.21.125.MB865.ATT.en.US
Baseband ver. : 2012-07-26 12:10 off.bld
LUD_EDISON_R1AD7_PATCH_49_120726_1154
crh1090280_M570_PC_CARD_RAIN
Thanks
Sent from my DROID BIONIC using Tapatalk
Go to your apn settings and reset them to default, that should pull the stored apns from your SIM. Are you on AT&T? Looks like you have an AT&T build.
The atrix2 phone only from at&t, but i'm going to use in my country (indonesia).
Already created manual apn for my network but the signal changed from edge to hspa then became unknown.
Looks like the radio baseband lock to US band..
Already select from phone information (*#*#4636#*#*), only option for auto network band. Need restore to original fxz, but my phone already have ota ics at&t. Thanks
Sent from my DROID BIONIC using Tapatalk
Related
Hey there,
I'm with TELUS (Canadian provider) and I have the nexus s, there was an update on my android and then after that... my phone didnt have any service! It wouldnt let me find TELUS network selection or manual selection and no service wouldnt able to show except wifi works... so I'm guessing google gave me the wrong update for my phone or what? I tried to research for HOURS and nothing.. its really annoying..
Android Version 2.3.6
Baseband Version NO DGSXXXKF1
BUILD # GRK39F
its not rooted or anthing... just a stock software... hope someone can help me out there... really appericate it
keegygti said:
Hey there,
I'm with TELUS (Canadian provider) and I have the nexus s, there was an update on my android and then after that... my phone didnt have any service! It wouldnt let me find TELUS network selection or manual selection and no service wouldnt able to show except wifi works... so I'm guessing google gave me the wrong update for my phone or what? I tried to research for HOURS and nothing.. its really annoying..
Android Version 2.3.6
Baseband Version NO DGSXXXKF1
BUILD # GRK39F
its not rooted or anthing... just a stock software... hope someone can help me out there... really appericate it
Click to expand...
Click to collapse
This worked for me, at least as far as data goes - in the same place where you choose network operators, choose the option for "access point names" then, when there, if there is no option for Telus, try pressing the menu button and clicking the option for "new APN" then in the fields enter the following:
- Name : TELUS
- APN: sp.telus.com
- Proxy: 74.49.0.18
- Port: 80
And then press the menu button again, hit save, and click the APN out of the list to connect.
That helped when I couldn't connect to Koodo, and they're the same network.
Hope this helps!
keegygti said:
Hey there,
I'm with TELUS (Canadian provider) and I have the nexus s, there was an update on my android and then after that... my phone didnt have any service! It wouldnt let me find TELUS network selection or manual selection and no service wouldnt able to show except wifi works... so I'm guessing google gave me the wrong update for my phone or what? I tried to research for HOURS and nothing.. its really annoying..
Android Version 2.3.6
Baseband Version NO DGSXXXKF1
BUILD # GRK39F
its not rooted or anthing... just a stock software... hope someone can help me out there... really appericate it
Click to expand...
Click to collapse
Hi, Did you manage to find a solution. I have a Nexus S 9020T and been using it fine under Fido/Rogers (WIthout 3G). Now that I moved swapped SIM to TELUS. it won't detect the TELUS network or connect to any. Any help would be appreciated.
Seeing how it says no radio you probably have to flash a radio for the i9020a, most likely UCKF1.
Sent from my Nexus S using XDA App
Provider: TELUS
version: 4.0.3
Baseband: I9020XXKI1
Build: IML74K
Phone was working perfectly fine before the switch to Telus. Even after reinserting the Fido SIM, phone will not connect to network.
Please assist.
My dads with telus... put his sim in my phone and no service but my rogers sum is still working fine... weird :S
Sent from my Nexus S using XDA App
Hello,
I bought the phone from Kijiji and it is stated as unlocked. When I put in my Virgin Mobile sim card it shows I have full bars and connected to the Virgin network and di not ask for an unlock code so should be unlocked? Now with the full service bars I have no data connection indicator and everything is on and the APN for Bell/Virgin is inputted in it already. But I cannot send or receive anything or use any data. Says network error.
Any help?
Thanks,
Jay
jaywiseman said:
Hello,
I bought the phone from Kijiji and it is stated as unlocked. When I put in my Virgin Mobile sim card it shows I have full bars and connected to the Virgin network and di not ask for an unlock code so should be unlocked? Now with the full service bars I have no data connection indicator and everything is on and the APN for Bell/Virgin is inputted in it already. But I cannot send or receive anything or use any data. Says network error.
Any help?
Thanks,
Jay
Click to expand...
Click to collapse
Are you sure Virgin is a GSM carrier? I'm pretty sure they are CDMA only..
lingowistico said:
Are you sure Virgin is a GSM carrier? I'm pretty sure they are CDMA only..
Click to expand...
Click to collapse
Virgin mobile no longer supports CDMA. They are 3G and 4g lte only now.
I have tried the virgin radios and different Rogers and AT&T. Even telus and tmobile radios but none worked.
When I put the SIM in it says its on virgin and connected but no 3G or lte logo and can't send or recieve texts or use anything with data.
jaywiseman said:
Virgin mobile no longer supports CDMA. They are 3G and 4g lte only now.
I have tried the virgin radios and different Rogers and AT&T. Even telus and tmobile radios but none worked.
When I put the SIM in it says its on virgin and connected but no 3G or lte logo and can't send or recieve texts or use anything with data.
Click to expand...
Click to collapse
I'm not convinced, are you sure they're off CDMA now? You need GSM fot texts and on this phone in general. 3G and LTE is not the same.
lingowistico said:
I'm not convinced, are you sure they're off CDMA now? You need GSM fot texts and on this phone in general. 3G and LTE is not the same.
Click to expand...
Click to collapse
This is virgin mobile canada. They only have 3G and LTE service here. I have had the S3, iPhone, and many other GSM phones no problems. Recently the Note 1 LTE. Not sure what is going on. It doesnt say to input an unlock code when I put in the SIM so it must be unlocked?
jaywiseman said:
This is virgin mobile canada. They only have 3G and LTE service here. I have had the S3, iPhone, and many other GSM phones no problems. Recently the Note 1 LTE. Not sure what is going on. It doesnt say to input an unlock code when I put in the SIM so it must be unlocked?
Click to expand...
Click to collapse
If if shows the carrier name and doesn't ask for a code then it's unlocked. Did you try Bell radios? Virgin Canada uses the Bell network and does indeed prefer lte and hspa to cdma as you said.
lingowistico said:
If if shows the carrier name and doesn't ask for a code then it's unlocked. Did you try Bell radios? Virgin Canada uses the Bell network and does indeed prefer lte and hspa to cdma as you said.
Click to expand...
Click to collapse
The only one I could find was the bell radios for the note and it flashed successfully but still the same issue. do you recommend any?
jaywiseman said:
The only one I could find was the bell radios for the note and it flashed successfully but still the same issue. do you recommend any?
Click to expand...
Click to collapse
Try the ones here. It seems like it's something else though. Try wiping data & cache & dalvik cache in recovery or doing a factory reset in settings. Try flashing a stock JB rom in Odin or any other rom for that matter. Try flashing a rom in recovery. Just be aware that JB roms need JB modems. JB modems are backwards compatible with ICS and GB roms. The two official JB modems are RUXUMA7 and UCMC1. There are JB modems from other devices that work on our phone as well, but you'll have to find them yourself as I don't remember.
lingowistico said:
Try the ones here. It seems like it's something else though. Try wiping data & cache & dalvik cache in recovery or doing a factory reset in settings. Try flashing a stock JB rom in Odin or any other rom for that matter. Try flashing a rom in recovery. Just be aware that JB roms need JB modems. JB modems are backwards compatible with ICS and GB roms. The two official JB modems are RUXUMA7 and UCMC1. There are JB modems from other devices that work on our phone as well, but you'll have to find them yourself as I don't remember.
Click to expand...
Click to collapse
thanks. Will try them and let you know.
lingowistico said:
Try the ones here. It seems like it's something else though. Try wiping data & cache & dalvik cache in recovery or doing a factory reset in settings. Try flashing a stock JB rom in Odin or any other rom for that matter. Try flashing a rom in recovery. Just be aware that JB roms need JB modems. JB modems are backwards compatible with ICS and GB roms. The two official JB modems are RUXUMA7 and UCMC1. There are JB modems from other devices that work on our phone as well, but you'll have to find them yourself as I don't remember.
Click to expand...
Click to collapse
Ok I tried everything you mentioned in the post. Still no luck. Tried the ROM you are using on your i727 that you have listed in your siggy. I really like it but still just comes up with "BELL" and no data and cant text or do anything.
jaywiseman said:
Ok I tried everything you mentioned in the post. Still no luck. Tried the ROM you are using on your i727 that you have listed in your siggy. I really like it but still just comes up with "BELL" and no data and cant text or do anything.
Click to expand...
Click to collapse
That's a problem. I really don't know how to help you. One thing you can do is compare Virgin Canada's hspa & lte frequencies with Skyorckets default ones and see if they match.
These are the default frequencies on the Skyrocket.
3G Network - HSDPA 850 / 1900 / 2100
4G Network - LTE 700 MHz Class 17 / 1700 / 2100
Click to expand...
Click to collapse
lingowistico said:
That's a problem. I really don't know how to help you. One thing you can do is compare Virgin Canada's hspa & lte frequencies with Skyorckets default ones and see if they match.
These are the default frequencies on the Skyrocket.
Click to expand...
Click to collapse
Bell
including
Virgin Mobile
PC Mobility
2G
CDMA 850/1900
EVDO 850/1900
3G (and fake 4G)
HSDPA 850/1900
HSPA+ 850/1900
UMTS 850/1900
WCDMA 850/1900
1x EV-DO CDMA2000
4G
LTE 1700
jaywiseman said:
Hello,
I bought the phone from Kijiji and it is stated as unlocked. When I put in my Virgin Mobile sim card it shows I have full bars and connected to the Virgin network and di not ask for an unlock code so should be unlocked? Now with the full service bars I have no data connection indicator and everything is on and the APN for Bell/Virgin is inputted in it already. But I cannot send or receive anything or use any data. Says network error.
Any help?
Thanks,
Jay
Click to expand...
Click to collapse
Jay, I had to unlock my phone myself with I bought it. I use Fido in Canada. After upgrading to include data for the first time, I had a similar problem. Everything looks fine but I had no Internet. I advice you to put your sim card in a Virgin phone already running with no problem and see whether the issue was is with your plan. Sometimes the carrier screws it up as well.
I have a Samsung Galaxy S3 SCH-I535 CDMA Verizon & GSM phone. Originally it was on android 4.1.2 and working fine for both CDMA and GSM (one at a time). CDMA EVDO Rev A data service was working fine.
I am using this phone in Nepal (not in USA). It was carrier unlocked for both CDMA & GSM when I purchased from Amazon. (so, I guess, Originally it may had some customized firmware/ROM for International use, I don’t have much idea).
I was asked for firmware upgrade every time when I run Samsung Kies. One day I clicked to upgrade the firmware. The upgrade was over successfully. But the new android version I found on my phone was 4.4.2.
In this version /new upgrade, I was unable to use CDMA data (EVDO-rev A). So I wanted to reverse back to old version. I search the process in Google and tried to load firmware with the help of Odin3 using this file:- “I535VRBMF1_I535VZWBMF1_VZW.zip”, but it was not successful. Result: Fail(Auth)
Then I loaded firmware for 4.4.2 using Odin3.09 (AP: “I535VRUDNE1_I535VZWDNE1_I535VRUDNE1_HOME.tar.md5”) and now the phone is working.
• If I use GSM SIM I can make call and use HSPA data service as well by adding new APN.
• If I use CDMA RUIM I can make call, BUT DATA SEVRICE using CDMA EVDO Rev A is NOT WORKING!! (I can not save APN in this case).
Now my issue is how to make CDMA EVDO data service working in my phone, because my basic requirement is to use this phone for CDMA service (voice + data).
I can edit the APN but when I click “Save”, nothing was saved. So I can not select APN for my carrier. I tried using APN Manager Pro too, here I can enter & enable the APN, but did not work. The phone is not able to dial the data access code #777 (verified from CDMA service provider side trace).
Can someone help me what I should do to make my phone working for CDMA data. My phone is rooted.
I guess it may work for CDMA data if I downgrade it to 4.3 or 4.1.2,
Can I do that. If so what are the procedures / steps. Any help in this regard would be highly appreciable.
My data worked this way
kkafle said:
I have a Samsung Galaxy S3 SCH-I535 CDMA Verizon & GSM phone. Originally it was on android 4.1.2 and working fine for both CDMA and GSM (one at a time). CDMA EVDO Rev A data service was working fine.
I am using this phone in Nepal (not in USA). It was carrier unlocked for both CDMA & GSM when I purchased from Amazon. (so, I guess, Originally it may had some customized firmware/ROM for International use, I don’t have much idea).
I was asked for firmware upgrade every time when I run Samsung Kies. One day I clicked to upgrade the firmware. The upgrade was over successfully. But the new android version I found on my phone was 4.4.2.
In this version /new upgrade, I was unable to use CDMA data (EVDO-rev A). So I wanted to reverse back to old version. I search the process in Google and tried to load firmware with the help of Odin3 using this file:- “I535VRBMF1_I535VZWBMF1_VZW.zip”, but it was not successful. Result: Fail(Auth)
Then I loaded firmware for 4.4.2 using Odin3.09 (AP: “I535VRUDNE1_I535VZWDNE1_I535VRUDNE1_HOME.tar.md5”) and now the phone is working.
• If I use GSM SIM I can make call and use HSPA data service as well by adding new APN.
• If I use CDMA RUIM I can make call, BUT DATA SEVRICE using CDMA EVDO Rev A is NOT WORKING!! (I can not save APN in this case).
Now my issue is how to make CDMA EVDO data service working in my phone, because my basic requirement is to use this phone for CDMA service (voice + data).
I can edit the APN but when I click “Save”, nothing was saved. So I can not select APN for my carrier. I tried using APN Manager Pro too, here I can enter & enable the APN, but did not work. The phone is not able to dial the data access code #777 (verified from CDMA service provider side trace).
Can someone help me what I should do to make my phone working for CDMA data. My phone is rooted.
I guess it may work for CDMA data if I downgrade it to 4.3 or 4.1.2,
Can I do that. If so what are the procedures / steps. Any help in this regard would be highly appreciable.
Click to expand...
Click to collapse
I think your problem is the region is not set Nepal...I installed dark jb rom in my phone and data was gone since then. Then I manually downloaded stock firmware and flashed through odin but still data wasnt working,nd while in recovery mode i saw region INS ie India. then something came in my mind and.. .I changed it to NPL and now i can use data in only sim 1 only not in both sims. So i also may need some help.
For you *#272*IMEI# . Use your phones IMEI number there (*#06#) . Select NPL region.
NOTE: It will hard format your phone installing required carrier apps, aps, bla bla and hope work on your phone
Pujan Shrestha said:
I think your problem is the region is not set Nepal...I installed dark jb rom in my phone and data was gone since then. Then I manually downloaded stock firmware and flashed through odin but still data wasnt working,nd while in recovery mode i saw region INS ie India. then something came in my mind and.. .I changed it to NPL and now i can use data in only sim 1 only not in both sims. So i also may need some help.
For you *#272*IMEI# . Use your phones IMEI number there (*#06#) . Select NPL region.
NOTE: It will hard format your phone installing required carrier apps, aps, bla bla and hope work on your phone
Click to expand...
Click to collapse
I found that the hidden menu (& hence secret code dialing) was disabled in my phone. Following guides from Google search I enabled it. Now codes likes "*#06#",*#1111#", "*#0228#" etc are working, but "*#272*IMEI#" is not working. Any idea, why it is not working?
kkafle said:
I have a Samsung Galaxy S3 SCH-I535 CDMA Verizon & GSM phone. Originally it was on android 4.1.2 and working fine for both CDMA and GSM (one at a time). CDMA EVDO Rev A data service was working fine.
I am using this phone in Nepal (not in USA). It was carrier unlocked for both CDMA & GSM when I purchased from Amazon. (so, I guess, Originally it may had some customized firmware/ROM for International use, I don’t have much idea).
I was asked for firmware upgrade every time when I run Samsung Kies. One day I clicked to upgrade the firmware. The upgrade was over successfully. But the new android version I found on my phone was 4.4.2.
In this version /new upgrade, I was unable to use CDMA data (EVDO-rev A). So I wanted to reverse back to old version. I search the process in Google and tried to load firmware with the help of Odin3 using this file:- “I535VRBMF1_I535VZWBMF1_VZW.zip”, but it was not successful. Result: Fail(Auth)
Then I loaded firmware for 4.4.2 using Odin3.09 (AP: “I535VRUDNE1_I535VZWDNE1_I535VRUDNE1_HOME.tar.md5”) and now the phone is working.
• If I use GSM SIM I can make call and use HSPA data service as well by adding new APN.
• If I use CDMA RUIM I can make call, BUT DATA SEVRICE using CDMA EVDO Rev A is NOT WORKING!! (I can not save APN in this case).
Now my issue is how to make CDMA EVDO data service working in my phone, because my basic requirement is to use this phone for CDMA service (voice + data).
I can edit the APN but when I click “Save”, nothing was saved. So I can not select APN for my carrier. I tried using APN Manager Pro too, here I can enter & enable the APN, but did not work. The phone is not able to dial the data access code #777 (verified from CDMA service provider side trace).
Can someone help me what I should do to make my phone working for CDMA data. My phone is rooted.
I guess it may work for CDMA data if I downgrade it to 4.3 or 4.1.2,
Can I do that. If so what are the procedures / steps. Any help in this regard would be highly appreciable.
Click to expand...
Click to collapse
Well, it looks to me as though you've locked your bootloader and are now stuck on 4.4.2. For some reason, Verizon forces Samsung to lock their bootloaders, which means we (the consumers) cannot install "custom" firmware on our devices (or downgrade).
Once you're on 4.4.2 NE1 your stuck with it. No downgrade possible at least not without a Jtag service
Sent from my SCH-I535 using Xparent ICS Tapatalk 2
I have faced similar problem I can't create apn I am using it in India . So my data i not working on any sim card but i can make and receive calls . My android version is also 4.3 . So please help me i want to use both hspa and evdo .
Sent from my iPhone using Tapatalk
Sir I purchased a new unlocked S6 Edge ( 925A) at&t device from abroad to use in india.
The guy told it's fully unlocked and it support any sim card. Buy when I checked with Indian Sims I am getting only 2g signals .. I am not getting 3G and 4g signals..
When I checked for network selection mode settings it's missing in the settings.
No software OTA update is available. . I think it's also disabled.. when I checked the device status it is in "custom"..
So if I flash a stock ROM with Odin will it lock again ?
Do I need to unlock it again.. ??
First check the model from bootloader, if its actually a att variant then you can flash a stock rom too make it work as normal, but if its some other variant then get back to this thread again.
Its surely an at&t Variant of Samsung Galaxy S6 EDGE.. its model number is 925A.. which is only available for ATT..
Its baseband version is G925AUCU1AOCE
I purchased this phone as fully unlocked from UAE but in india when i start to use it i came to know that its not taking 3G and 4G signals .. but 2g Signal and Data services are working fine..
I got the phone in rooted condition without any Boot animation of At&t. Since its rooted i am not getting any official updates.
I am also facing many software bugs.. from different apps..
So really want to flash the phone with a new stock rom for using it..
I have some doubts about it please clear it..
1) if i flash it with an official att stock rom will it lock again for att network ?
2) can i remove the att boot animation after flashing with stock rom ?
Sent from my SM-925A using XDA Free mobile app
Providers in India use bands 3, 40, and 41 for LTE. The AT&T S6 Edge is only compatible with band 3.
I doubt you'd be able to flash a different ROM, and even if you could, you still wouldn't have compatibility with bands 40 or 41.
Firstly Thanks for your reply.. i know that S6 Edge at&t only support Band 3 LTE cuz it's a FDD LTE supported device.. in my country here providers are using both TDD & FDD LTE bands for LTE..
In my region "Kerala" at presently all the providers are using Band 3 which is compatible will my phone. But i am not receiving any LTE and 3G signals..
My friends have different unlocked phones from T-Mobile they are not facing any problem..
I am still doubt the flashing ROM.. i am going to flash the stock rom for at&t.. it's the only official rom available for my device.
It could be an APN issue. Make sure the settings are the same as your friends are using. Beyond that, I have no idea.
Nothing Wrong with the APN.. cuz i am using 2G data without any problems.
We have same APN for all 2G ,3G & 4G..
I think its the problem with my software..
I can't switch between LTE/WCDMA/2G because that network mode selection option is disabled or not available..
I am compelled to flash a new Rom..
I don't have any other options.
I own a good phone but i can't use it . Really sad about it..
for sure people here can help you more on this
http://forum.xda-developers.com/galaxy-s6-edge
I have my s6 Edge in Fully unlocked condition with Root Access also..i purchased it as unlocked from Dubai. But i cant find any Network Selection mode in my settings. Itz a ATT variant with model number 925A. The device is not taking 4G signals in india. Also there is no Network selection option in the settings to toggle between 3g & 4G..
Please help me?
Hi. A friend brought me an S7 (AT&T variant) with the following problems.
Network doesn't work over 2g (only edge connection)
The firmware version was incorrect (showing SM-G930F)
We are in Argentina*
I've flashed a oreo firmware for g930u variant with G930UUEU4CRG2 baseband
Thw phone works well, but the network problem persist, only have 2g (edge) internet.
Calls and sms works, apn settings are correct
Any idea?
Thanks for read
Julian003 said:
Hi. A friend brought me an S7 (AT&T variant) with the following problems.
Network doesn't work over 2g (only edge connection)
The firmware version was incorrect (showing SM-G930F)
We are in Argentina*
I've flashed a oreo firmware for g930u variant with G930UUEU4CRG2 baseband
Thw phone works well, but the network problem persist, only have 2g (edge) internet.
Calls and sms works, apn settings are correct
Any idea?
Thanks for read
Click to expand...
Click to collapse
USA network bands, phone will never be fully compatible with Argentina network.
cooltt said:
USA network bands, phone will never be fully compatible with Argentina network.
Click to expand...
Click to collapse
Then why 2g works and 3g no? Both use 850/1900mhz (B2 and B5 bands)