My Malata T8 just updated to Malata_t8_smba_9701_cm9_3g ROM
http://forum.xda-developers.com/showthread.php?t=1864362
Afterward I found my internal storage "/data" only have 252MB but "/cache" storage has 2G, the partition status as
/dev/block/mmcblk0p3 Size:315M Used:250.5M /system
/dev/block/mmcblk0p4 Size:252M Used:136.7M /data
/dev/block/mmcblk0p6 Size:2.0G Used:35M /cache
If anyone can help me to change the 2G cache back to data for Apps installation.
Thanks !
Anybody can help ?
flying1628 said:
My Malata T8 just updated to Malata_t8_smba_9701_cm9_3g ROM
http://forum.xda-developers.com/showthread.php?t=1864362
Afterward I found my internal storage "/data" only have 252MB but "/cache" storage has 2G, the partition status as
/dev/block/mmcblk0p3 Size:315M Used:250.5M /system
/dev/block/mmcblk0p4 Size:252M Used:136.7M /data
/dev/block/mmcblk0p6 Size:2.0G Used:35M /cache
If anyone can help me to change the 2G cache back to data for Apps installation.
Thanks !
Click to expand...
Click to collapse
Whether there are anybody can help me ?
Related
My Malata T8 just updated to ICS 4.0.4 ([ROM] AOSP 4.0.4 ics rom for malata t8(smba_9701)mcc)
http://forum.xda-developers.com/showthread.php?t=1851655
Everything works fine but I just got 252MB storage for apps installation "/data", the partition status as
/dev/block/mmcblk0p3 Size:315M Used:250.5M /system
/dev/block/mmcblk0p4 Size:252M Used:136.7M /data
/dev/block/mmcblk0p6 Size:2.0G Used:35M /cache
How can I change the 2G space in /cache to /data for apps installation.
Thanks for your help in advance.
Hello everyone, I increased my system partition size successfully using [HOWTO][GUIDE][Mi3][Mi4]Resize/extend system partition capacity by arif920629 guide . I deleted system, system1 , cache and userdata . Now I created the system partitions using "mkpartfs primary ext2 xxx xxx" . But I am confused whether to create the cache and userdata partition in the same way. Also after creating system partitions I used the below code to make them from ext2 to ext4.
"
tune2fs -j /dev/block/mmcblk0p25
e2fsck -fDp /dev/block/mmcblk0p25
tune2fs -O extents,uninit_bg,dir_index /dev/block/mmcblk0p25
e2fsck -fDp /dev/block/mmcblk0p25
Click to expand...
Click to collapse
But as I change the cache and userdata from ext2 to ext4 using that method then wiping data & or factory reset is not wiping anything. So I guess it not the procedure for the cache and userdata partition . So can someone help me to make them as they should be or used to be.
Hi!
I have trouble when i put TWRP and make wipe cache, system and dalvik. The phone gives me the following information:
E:failed to mount /data
Cannot mount /data and unable to find crypto footer.
E:failed to mount /cpefs
Click to expand...
Click to collapse
HELP ME!
natanjuniors said:
hi!
I have trouble when i put twrp and make wipe cache, system and dalvik. The phone gives me the following information:
Help me!
Click to expand...
Click to collapse
Format Data
natanjuniors said:
Hi!
I have trouble when i put TWRP and make wipe cache, system and dalvik. The phone gives me the following information:
HELP ME!
Click to expand...
Click to collapse
Format data and fully wipe
You just erase or deleted files on your internal memory. But no biggie, just flash firmware with Odin (on windows) heimdall (on Linux).
Sent from my SM-J700P using Tapatalk
natanjuniors said:
Hi!
I have trouble when i put TWRP and make wipe cache, system and dalvik. The phone gives me the following information:
HELP ME!
Click to expand...
Click to collapse
Format Data ... Yes ...
JHAM2005 said:
Format Data ... Yes ...
Click to expand...
Click to collapse
hi!
i have the same problem on galaxy j7 2016. after formating data i have the error : failed to mount '/cpefs' (invalid argument). i tried the command :
mke2fs /dev/block/mmcblk0p4 and mount -w -t ext4 /dev/block/mmcblk0p4 but i have the same error : mounting /dev/block/mmcblk0p4 on /cpefs failed: inavalid argument
help plz
Mrntnn said:
hi!
i have the same problem on galaxy j7 2016. after formating data i have the error : failed to mount '/cpefs' (invalid argument). i tried the command :
mke2fs /dev/block/mmcblk0p4 and mount -w -t ext4 /dev/block/mmcblk0p4 but i have the same error : mounting /dev/block/mmcblk0p4 on /cpefs failed: inavalid argument
help plz
Click to expand...
Click to collapse
Ignore the cpefs error, it's erroneous and will be fixed.
As long as you can mount data you are good.
Mrntnn said:
hi!
i have the same problem on galaxy j7 2016. after formating data i have the error : failed to mount '/cpefs' (invalid argument). i tried the command :
mke2fs /dev/block/mmcblk0p4 and mount -w -t ext4 /dev/block/mmcblk0p4 but i have the same error : mounting /dev/block/mmcblk0p4 on /cpefs failed: inavalid argument
help plz
Click to expand...
Click to collapse
How to ... Unlock Memory and have Root on the J710MN with Nougat 7
https://forum.xda-developers.com/ga...d-7-nougat-t3674417/post73826249#post73826249
hey i have solution
first 1. flash letest twrp
2.flash magisk 19.2
3. reboot system
100% done
Could a genius with some time on there hands make TWRP for this device, its driving me insane, everything provided below.
Android 8.1
2GB RAM
Snapdragon 210
MSM8909
GPU Adreno 304
Times like these i wish i could follow a tutorial correctly.
Thanks in advance!
I had to archive the recovery as the IMG was over 8MB.
frankieuk said:
Could a genius with some time on there hands make TWRP for this device, its driving me insane, everything provided below.
Android 8.1
2GB RAM
Snapdragon 210
MSM8909
GPU Adreno 304
Times like these i wish i could follow a tutorial correctly.
Thanks in advance!
I had to archive the recovery as the IMG was over 8MB.
Click to expand...
Click to collapse
I know this reply is a little late... but have you tried twrp builder app? Search xda... got a working recovery for an obscure UMX budget phone... I have this tablet but I haven't bothered trying to do anything with it.
i have ported the Lenovo Tab 10 TB-X103F twrp to {TB-X104F}
tdawgg777 said:
I know this reply is a little late... but have you tried twrp builder app? Search xda... got a working recovery for an obscure UMX budget phone... I have this tablet but I haven't bothered trying to do anything with it.
Click to expand...
Click to collapse
i have ported the Lenovo Tab 10 TB-X103F twrp to {TB-X104F}but.... i having problems with partitions when i boot into it
i think my problems has to do with recovery.FSTAB file
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
heres my current recovery.fstab for twrp
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
#device mount point fstype [device2] [length=]
/boot emmc /dev/block/bootdevice/by-name/boot flags=display="Boot";backup=1
/recovery emmc /dev/block/bootdevice/by-name/recovery flags=display="Recovery";backup=1
/system ext4 /dev/block/bootdevice/by-name/system flags=display="System";backup=1;wipeingui
/misc emmc /dev/block/bootdevice/by-name/misc flags=display="Misc";backup=0
/cache ext4 /dev/block/bootdevice/by-name/cache flags=display="Cache";backup=1;wipeingui;wipeduringfactoryreset
/data ext4 /dev/block/bootdevice/by-name/userdata flags=display="Data";backup=1;wipeingui;wipeduringfactoryreset;length=-16384
/sdcard0 vfat /dev/block/mmcblk1p1 flags=display="Micro SDCard";storage;wipeingui;removable;backup=0
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
______________________________________________________________________________________________________________________
heres he stock recovery.fstab
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
#device mount point fstype [device2] [length=]
/dev/block/bootdevice/by-name/system /system ext4 ro,barrier=1 wait
/dev/block/bootdevice/by-name/vendor /vendor ext4 ro,barrier=1 wait
/dev/block/bootdevice/by-name/cache /cache ext4 noatime,nosuid,nodev,barrier=1,data=ordered wait,check
/dev/block/bootdevice/by-name/userdata /data ext4 noatime,nosuid,nodev,barrier=1,data=ordered,noauto_da_alloc wait,check,encryptable=footer
/dev/block/mmcblk1p1 /sdcard vfat nosuid,nodev wait
/dev/block/bootdevice/by-name/boot /boot emmc defaults defaults
/dev/block/bootdevice/by-name/recovery /recovery emmc defaults defaults
/dev/block/bootdevice/by-name/misc /misc emmc defaults defaults
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
none of the partitions show up except (microsd card)
what am i doing wrong
Interested in recovery for this tablet also. Any luck?
Sent from my SM-N960U using Tapatalk
Hello Good People,
Is there a working TWRP for this tablet?
T.I.A.
Hello again,
Is there any working recovery for this tablet.
Its very very difficult to find a custom ROM.
Are people using LineageOS ?
T.I.A.
Hello everybody. I need Your help.
I have Lenovo P2. Last days i tried some ROMs. I have TWRP and before every new upload i FORMAT DATA(Wipe) and of course wipe cache, system
Today when I try to format I have error:
Unable to wipe '/data' -- unknown file system 'auto'
Unable to format to remove encryption
when i typed :
cat /etc/fstab
i got:
/dev/block/mmcblk0p56 /data ext4 rw 0 0
I read some posts of forum and ?solution? to repair is to type this:
make_ext4fs /dev/block/mmcblk0p56
after this i had 0MB Internal Storage and many errors when try to format any data, cache, internal....
So i changed to f2fs and back to ext4 and Internal Storage is OK but still can't format data
Now I can upload ROM but when it starting i have monit "Encryption unsuccessful and interrupted"
PLEASE HELP i can't use my Lenovo :crying:
btw. my linux knowledge is not very well