I have got my Note II rooted and flashed the Android Revolution HD Rom.
Everything was fine and it worked smoothly.
But after installation of many apps, a problem turned out yesterday:
The menu button function has been mapped to the home button, which means when I pressed the home button, it will detected as menu button instead.
After that, I use the KEY TEST in the CWM Recovery to test the key setting.
I found that the home button is wrongly detected as the menu key. (It returns the same Code 139 when I pressed the two buttons)
the result shown as attached
How can I fixed this problem by reset the hard key map setting?
Please Help
Thanks so much!
ericlau820 said:
I have got my Note II rooted and flashed the Android Revolution HD Rom.
Everything was fine and it worked smoothly.
But after installation of many apps, a problem turned out yesterday:
The menu button function has been mapped to the home button, which means when I pressed the home button, it will detected as menu button instead.
After that, I use the KEY TEST in the CWM Recovery to test the key setting.
I found that the home button is wrongly detected as the menu key. (It returns the same Code 139 when I pressed the two buttons)
the result shown as attached
How can I fixed this problem by reset the hard key map setting?
Please Help
Thanks so much!
Click to expand...
Click to collapse
please help
Related
I've used this program for years but I'm having trouble getting it to work on my FUZE.
I searched the forums and found a few threads where people recommend it and said it worked great on their phone. I also read that the home and ok button's can't be re-mapped (well... they can... but it's bot practical).
So, I'm trying to re-map the send and hang up keys. I assumed the keys are the green and red phone keys listed within AE Button Plus. I edited those to do what I wanted and soft reset the device. Problem is, neither of the buttons do anything I told AE Button Plus to do. A long hold of the green phone button starts Voice Command. A long hold of the red phone button opens the "Long Press Red Key" application. I'm using NATF's 2.2 ROM (if that makes a difference).
I thought that maybe the FUZE has it's own button codes so I tried adding buttons. But clicking on the red or green phone button while the add a button window is popped up doesn't work.
How do those of you with your FUZE have AE Button Plus working with the phone hardware buttons? What am I doing wrong?
I have mapped the Green button with AEBPlus and it is working fine. For this button you don't need to use Add button function and I think,the Red button can be mapped same way.
TomasNM said:
I have mapped the Green button with AEBPlus and it is working fine. For this button you don't need to use Add button function and I think,the Red button can be mapped same way.
Click to expand...
Click to collapse
You're right. I did some more testing and single, double, and triple presses work fine. The problem is, I can't re-map the long press'. Is it possible?
TomasNM said:
I have mapped the Green button with AEBPlus and it is working fine. For this button you don't need to use Add button function and I think,the Red button can be mapped same way.
Click to expand...
Click to collapse
You're right. I did some more testing and single, double, and triple presses work fine. The problem is, I can't re-map the long press'. Is it possible?
guitarlp said:
I've used this program for years but I'm having trouble getting it to work on my FUZE.
I searched the forums and found a few threads where people recommend it and said it worked great on their phone. I also read that the home and ok button's can't be re-mapped (well... they can... but it's bot practical).
So, I'm trying to re-map the send and hang up keys. I assumed the keys are the green and red phone keys listed within AE Button Plus. I edited those to do what I wanted and soft reset the device. Problem is, neither of the buttons do anything I told AE Button Plus to do. A long hold of the green phone button starts Voice Command. A long hold of the red phone button opens the "Long Press Red Key" application. I'm using NATF's 2.2 ROM (if that makes a difference).
I thought that maybe the FUZE has it's own button codes so I tried adding buttons. But clicking on the red or green phone button while the add a button window is popped up doesn't work.
How do those of you with your FUZE have AE Button Plus working with the phone hardware buttons? What am I doing wrong?
Click to expand...
Click to collapse
Try again to add the buttons, but this time hold the call and end buttons longer. It will only let u remap the long press. However it will also remap the PTT button. This is a problem for me. I have found a way to kinda cheat this though. I created the PTT_Long.lnk file in the windows directory. (You can find the directions somewhere here in the Rafael forums) Now my short press = camera and I can program the long press etc. And I can use AEBPlus to remap everything else.. Good luck..Hopefully AEBPlus will update their software to work with the Rafael...
noellenchris said:
Try again to add the buttons, but this time hold the call and end buttons longer. It will only let u remap the long press. However it will also remap the PTT button. This is a problem for me. I have found a way to kinda cheat this though. I created the PTT_Long.lnk file in the windows directory. (You can find the directions somewhere here in the Rafael forums) Now my short press = camera and I can program the long press etc. And I can use AEBPlus to remap everything else.. Good luck..Hopefully AEBPlus will update their software to work with the Rafael...
Click to expand...
Click to collapse
It's still not working for me
If I press the green button too long it opens up a new windows with things like "Turn Airplane Mode on" and a few others being shown.
If I press the red button too long it starts Voice Command. If I press it any shorter then that it doesn't register as a new code within AE Button Plus.
I'm not sure what you did to get it working on your end... but I can't re-map the long press' of those buttons on my phone.
Maybe I need to disable the default long press commands via the registry?
remap soft keys on HOME screen of TF3D
I am using PI8 (pocket informant) as my contacts and calendar. I would like to remap the 2 soft keys that are currently going to "windows" version of calendar and contacts, to instead go to PI8 version of calendar and contacts.
bmarkoff said:
I am using PI8 (pocket informant) as my contacts and calendar. I would like to remap the 2 soft keys that are currently going to "windows" version of calendar and contacts, to instead go to PI8 version of calendar and contacts.
Click to expand...
Click to collapse
Use advanced config and you can set them that way. You have to soft reset aftewards...
guitarlp said:
It's still not working for me
If I press the green button too long it opens up a new windows with things like "Turn Airplane Mode on" and a few others being shown.
If I press the red button too long it starts Voice Command. If I press it any shorter then that it doesn't register as a new code within AE Button Plus.
I'm not sure what you did to get it working on your end... but I can't re-map the long press' of those buttons on my phone.
Maybe I need to disable the default long press commands via the registry?
Click to expand...
Click to collapse
There is a new version of AEBPlus out, however it still doesn't get along with the Fuze very well. I Finally uninstalled it and am happy with short/long press only on the PTT. I also run GScroll and use it to double touch the capacitive screen to launch stuff...much better...
home soft keys for PI8
please explain where in Advanced config do I go to change a setting for the 2 soft keys for the home screen. I can't find anything. I found it in Diamond tweaks under 14.5 but it does not give me an option to select PI8.
The long keypress for Green button can be solved by standart button settings as a "Button1(Hold)". I have mapped for a longpress the phone interface that way(1click I use as Alt+Tab). I don't know about red button,because I use red button to instantly drop the call and this feature is missing in my version of AEBPlus and I don't need to upgrade.
Does anyone else have problems mapping the center D pad button of the touch pro using AEB Plus? I can map it ok for the double, triple and long press, but when I map it to anything, the single press (mapped to press "enter" or call default handler) doesn't work anymore... It seems to disable the main function of the center button (enter). It's a pretty important function to press enter so currently I can't map any other functions to the button, because the main one then becomes disabled... What am I doing wrong here? Reading some other posts on this tread, it seems like others were able to map this button successfully and still use the "enter" function. A specific sequence maybe? I've tried this with a couple different ROMS including the stock SPRINT ROM and I get the same results. Can anyone help? I should point out that I have a fully registered version, and I've been able to map the green and red buttons successfully.
I have it as following:
Handle by AEBPlus
Single press: Press Enter(third option)
Double press: Select all
Long press: Display off
That are all builtin features of AEBPlus,so no exe commands or applications.
And it works good.
that's what I mapped the single press to... I mapped double press to ok/close, triple press to close active application, and long press to psshutxp... when i do this, every press works except the single press! furthermore, it also disables the enter key on the slide out keyboard... I have the lastest build (2.6.5). Can anyone help? This is driving me crazy!!! I've tried uninstalling/reinstalling. For some reason when I reinstall, it seems to remember my previous settings...and course, it behaves the same way...
Hi all,
Been looking around for a way to change my volume buttons so that i can use it to scroll up and down (using goodlink and everytime i click on a item it goes into that item and not do a show preview on the preview panel)
Does anyone know of a bit of kit that would do this job? Have looked at "advanced config" but cant seem to find a way to change/map the volume buttons to make them scroll up and down a list.
Thanks
Sorry all...looks like i answered myy own question. Finally found the below to sort out what i need and it works with the topaz!.
Sorry for the same and FYI the thread is below.
http://forum.xda-developers.com/showthread.php?t=409243&highlight=remap+volume
"What works for me is AEButton Plus (payware, no affiliation). I have reconfigured my volume buttons to single press = arrow up/down and long press to volume. The program has a nice function: you can choose to let the volume buttons have their default behavior during a phonecall.."
Fine, thank u. And it works on your Touch Diamond 2 Topaz?
yep works a treat on my Diamond 2 topaz
...i do have netcf 3.5 installed before i installed AE buttons aswell for other programs (not sure if that will matter for AE buttons)
im not really getting along with it.
cant see the optino for changing what the volume keys do etc.
Also, would it be possible to set a longer hold of the End Key that would launch the camera application and be used as shutter button?
Thanks
Hmm, interesting thoughts! Especially if the remap is done automatically, and only when the camera is launched.
Regards,
PK
toady2k1 said:
Also, would it be possible to set a longer hold of the End Key that would launch the camera application and be used as shutter button?
Thanks
Click to expand...
Click to collapse
I believe this issue with scrolling will be resolved with WM6.5 when you can slide the bar up/down to do a selection. In the meantime I use a simple method to scroll/select - say a SMS message. I open the abc phone pad (icon at bottom of screen) and then use the up/down keys (at the bottom) to scroll.
AE Button Plus
Just to confirm.. AE Button Plus DOES allow you to remap the volume buttons to up/down arrows. Just installed it on mine (Touch Diamond 2) and it works perfect.
The setting-up routine isn't obvious though.
When you see your list of keys in AEBP, pres and HOLD on the "Volume up" item. Takes a few seconds for the config menu to pop up.
I then used the following options from the config screen:-
3. Handle by AEBPlus
1. Single Press
5. Press Up arrow key
Then do the same for the Volume Down key, obviously changing the last option to 6. Press Down arrow key.
Then File/Save & Exit, and off you go.
paalkr said:
Originally Posted by toady2k1 View Post
Also, would it be possible to set a longer hold of the End Key that would launch the camera application and be used as shutter button?
Thanks
--->
Hmm, interesting thoughts! Especially if the remap is done automatically, and only when the camera is launched.
Regards,
PK
Click to expand...
Click to collapse
Very interested in this one =) anyone found a way to do this?
sorkig said:
Very interested in this one =) anyone found a way to do this?
Click to expand...
Click to collapse
Try this...
http://forum.xda-developers.com/showthread.php?t=555821
This program can assign any of the hardware buttons to do what you want...
I've set the back button Launch the 'camera' app if it is held for a while and to act as the capture button when taking a picture. It also acts like a normal 'back' button when in other apps such as file explorer,opera, etc.
toady2k1 said:
im not really getting along with it.
cant see the optino for changing what the volume keys do etc.
Also, would it be possible to set a longer hold of the End Key that would launch the camera application and be used as shutter button?
Thanks
Click to expand...
Click to collapse
Using the software provided in this thread it's possible:
http://forum.xda-developers.com/showthread.php?t=555821
See this thread where I explain how to do that:
http://forum.xda-developers.com/showthread.php?t=557546
Works like a charm!!
You can remap all your hardware buttons.
Cheers
Can some one post AEBPlus.cfg/ Button registry
I copy my button's from att tilt ( registry exported adn imported thru back up and restore process) so now on my Pure I have many buttons. Can some post their AEBPLus.cfg adn button registry export?
v3patel said:
I copy my button's from att tilt ( registry exported adn imported thru back up and restore process) so now on my Pure I have many buttons. Can some post their AEBPLus.cfg adn button registry export?
Click to expand...
Click to collapse
This program is much better than AEB.
Hey everybody, I've been having some trouble with my Nationite Midnite (Wits A81E).
My hardware buttons (softkeys) for back, menu, and home are broken. I have an app installed that lets me use a touchscreen button for them but the only one that actually works is the home screen button. What I want to try to do is edit the key mappings so that a long press of the functioning volume buttons could be assigned to back and menu. If anyone knows anything about this, please help me! Thanks in advance!
-Patrick Legacy
Hi guys, this is my first post here.
I have rooted my Galaxy Y Pro B5510 and everything was ok.
I tried to remap a key from the system files in the root.(keylayout)
But first I backuped that floder to my SDcard.
I changed a key and reset the phone. The change I made was working so I wanted to return it to it's default. So I coppied my backedup files over the edited ones and reset the phone again.
But when the phone was turned on I couldn't use my physical keyboard anymore.
By the way earlier I used an application called "keyremapper". Can it be the source of the problem?
I have limited access to menus since I can't use the go back button on the keyboard and I can't even use the power on/off button, volume up/down button and so on...
The keyboard is completely locked.
I tried to re-copy my backedup files over the system/usr/keylayout/ using touchscreen with the application called "root explorer" but that didn't fix it either.
Guys can you please help me out here?
Thank you in advance.
Nevermind, fixed it.
Same problem, please help
Theodenn said:
Nevermind, fixed it.
Click to expand...
Click to collapse
Hi, Theodenn!
Recently I've lost control of keyboard on b5510 - it doesn't react at all. Touchscreen works well.
"Volume up" and "Volume down" buttons - the same, do not respond.
The situation looks like yours pretty well!
Please, could you explain, how did you manage to fix this problem?
tupakki said:
Hi, Theodenn!
Recently I've lost control of keyboard on b5510 - it doesn't react at all. Touchscreen works well.
"Volume up" and "Volume down" buttons - the same, do not respond.
The situation looks like yours pretty well!
Please, could you explain, how did you manage to fix this problem?
Click to expand...
Click to collapse
i think boot it while holding these button at same time : "volume up"+"home button"+"power button"
after that navigate using "volume up" or "volume down" and pick option number 3 and 4 using "home button"
look forward to help u :laugh:
seraphia9012 said:
i think boot it while holding these button at same time : "volume up"+"home button"+"power button"
after that navigate using "volume up" or "volume down" and pick option number 3 and 4 using "home button"
look forward to help u :laugh:
Click to expand...
Click to collapse
Thank you for your reply: I tried to do that but it did not work.
I think this is because buttons "volume up" and "home button" do not work from the very beginning - they do not work even at the moment when I power the phone. I think so, because after the operating system is loaded - they do not work too.
Actually all the row of buttons above the typing keypad is also off (or locked). Optical joystick and keypad are off.
Only "Power button" and touchscreen are active and respond as earlier.
May be smth. else can be done?