Database Info

Bricked (?) ASUS Transformer Infinity TF700T

Hi there,
I need your help urgently.
I received a brand new TF700T and did make it work to support root.
I also did unlock the bootrom protection.
When I tried to install a custom ROM manager (Clockwork Mod) image from:here
The device didn't want to start any more - showing message:
The Device ist Unlocked.
Android cardhu-user bootloader <2.10 e> released by "TW_epad-9.4.5.22-20120615" A03
Checking for android ota recovery
Booting recovery kernel image
But nothing happens anymore (
I can wait for the battery to run empty in this mode.
There' no chance to boot from Micro SD.
The only thing what works at the moment is to connect the device via APX drivers.
I tried to communicate with device via NVFLASH tool
But when trying this - I get the message:
Nvflash started
Unknown Device found
Does any one have an idea where to find appropriate drivers for Nvflash?
Or the parameters to match TF700T?
Thanks in advance!

if you are able to access APX then you still have hope, first of all you need to push custom recovery like TWRP via fastboot mode and then install custom ROM. Most likelly you were to lazy to read a lot information on this forum how to install stuff properlly.
EDIT: if Tf700t has pin hole you should turn it off despite waiting for it to discharge...

nikoltu said:
if you are able to access APX then you still have hope, first of all you need to push custom recovery like TWRP via fastboot mode and then install custom ROM. Most likelly you were to lazy to read a lot information on this forum how to install stuff properlly.
EDIT: if Tf700t has pin hole you should turn it off despite waiting for it to discharge...
Click to expand...
Click to collapse
I did already read a lot - for hours and nights.
But my main problem is: UNKNOWN DEVICE
What does TWRP mean? How do I get fastboot to work?
I'm even not allowed to enter recovery mode.
The device is just recognized as an APX -device...
I can't push or download any custom ROM since I can't communicate with the device in both directions...

For those who messed up really bad and can't boot but are unlocked.
EDIT: I didn't see that you are not unlocked. then you should Power on + volume down, wait, see two icons select wipe, pray to god it helped or not. And if it doesn't boot and you are not unlocked last thing to do is RMA.
You are not allowed to enter recovery because you have stock one with droid dead and red triangle I guess.This is TWRP site and all instructions are here TWRP - Team Win Recovery Project is alternative to ClockworkMod Recovery but better. to get to fast boot turn on your tab holding power on + volume down and then do nothing while it asks to pres up. if you are unlocked you will see 3 icons select usb drive icon. FASTBOOT mode. now follow instructions from TWRP site. after that youl need custom rom zip. if recovery instaled successfuly and you can get into it you'll need to put custom ro into microSD or if you can into internal storage. if you can't conect to pc via cable and start cmd if Windows or terminal if Linux or mac. type
Code:
adb shell
mount /dev/block/mmcblk1p1 /data/media
you will be able to access microSD via recovery (unless it is different than Prime tf201 you will need different command, but give it a try)

nikoltu said:
EDIT: I didn't see that you are not unlocked. then you should Power on + volume down, wait, see two icons select wipe, pray to god it helped or not. And if it doesn't boot and you are not unlocked last thing to do is RMA.
You are not allowed to enter recovery because you have stock one with droid dead and red triangle I guess.This is TWRP site and all instructions are here TWRP - Team Win Recovery Project is alternative to ClockworkMod Recovery but better. to get to fast boot turn on your tab holding power on + volume down and then do nothing while it asks to pres up. if you are unlocked you will see 3 icons select usb drive icon. FASTBOOT mode. now follow instructions from TWRP site. after that youl need custom rom zip. if recovery instaled successfuly and you can get into it you'll need to put custom ro into microSD or if you can into internal storage. if you can't conect to pc via cable and start cmd if Windows or terminal if Linux or mac. type
Code:
adb shell
mount /dev/block/mmcblk1p1 /data/media
you will be able to access microSD via recovery (unless it is different than Prime tf201 you will need different command, but give it a try)
Click to expand...
Click to collapse
Thanks for advise - BUT
I have no choice like selecting Fastboot or USB etc. with volume buttons.
These options unfortunately do not come up anymore.
My device is definetly unlocked. It shows up "Device unlocked" when trying to boot normally.
When trying to go to recovery, with Volume - hold, the device tries to launch to recovery but hangs in status:
Device is Unlocked
Android cardhu-user bootloader (2.10 e) released by "TW_epad-9.4.5.22-20120615" A03
Checking for android ota recovery
Booting recovery kernel.
I have NO option to go to fastboot! Only way will be APX but nvflas always tell me unknown device.
So I was looking for any other version of nvflash.
In other forum I did find hint for nvflash ICS but didn't find right version yet.
If I only could get communication via APX worked to my device, then I could send data via nvflash and APX...

I assume you can't even go to rom as it bootloops on EEE pad screen not on rom splash screen
1. Did you try Wipe option in (power + volume down, wait 5 sec.)? [it is esential in all situations of trying to recover]
2.ammm... when you enter "adb devices" in your cmd on PC doesn't it show anything (do it while your tablet is on and hangs anywhere, just make sure it is on)? list is empty? if not it shows your device with some random letters and numbers.
Try manually setting your pc. Download android SDK and all packages for Android 4.x then in Device Manager (Control panel) find your Tablet and update your driver to Android ADB interface (you can experiment, till your device is shown correctly via adb devices command).
But first of all make sure you do or did first step. it is common issue among Prime users so maybe it can help you.

nikoltu said:
I assume you can't even go to rom as it bootloops on EEE pad screen not on rom splash screen
1. Did you try Wipe option in (power + volume down, wait 5 sec.)? [it is esential in all situations of trying to recover]
2.ammm... when you enter "adb devices" in your cmd on PC doesn't it show anything (do it while your tablet is on and hangs anywhere, just make sure it is on)? list is empty? if not it shows your device with some random letters and numbers.
Try manually setting your pc. Download android SDK and all packages for Android 4.x then in Device Manager (Control panel) find your Tablet and update your driver to Android ADB interface (you can experiment, till your device is shown correctly via adb devices command).
But first of all make sure you do or did first step. it is common issue among Prime users so maybe it can help you.
Click to expand...
Click to collapse
I would like to exchange email-adresses to enhance communication.
You could also send email to [email protected]
I did try with button combination (power & + button) as well, but device did not wipe.
For now - I'm about to update Android SDK )
Hopefully this works to recognize my TF700T...

If you manage to unbrick please post the information back here it may be helpful to others.

t-liner said:
My device is definetly unlocked. It shows up "Device unlocked" when trying to boot normally.
Click to expand...
Click to collapse
How did you get your TF700 unlocked? Asus hasn't posted an unlock tool for it yet that I could find.

Asus devices have the same unlock tool
Sent from my Transformer Prime TF201 using xda app-developers app

nikoltu said:
Asus devices have the same unlock tool
Sent from my Transformer Prime TF201 using xda app-developers app
Click to expand...
Click to collapse
Unlock + Root was never a problem.
I managed it to unlock the device using the TF300T tool / link.
Boot loop was big problem.
I did raise RMA in the meantime. New device is on the way.
Thanks to all repliers.
I will keep off doing this again / wait until xda-experts will provide a working way to CWM TF700T.

My Transformer Infinity isn't bricked, I just can't get it to boot into recovery. (I'm unlocked and rooted, but no custom ROM.) I have tried both CWM and TWRP 2.2.0 with GooManager. The tablet just won't boot into recovery mode. I can hold the Down Volume key and Power button to have the initial boot up menu display. When I press the Up Volume button to boot into recovery mode, it just hangs like the OP talks about. I then have to hold the power button for about five or so seconds to get it to power down again. I can turn it back on and it will boot normally.
I thought maybe something was messed up because I installed busybox, or hacked the Flash Player to work in desktop mode, or tweaked the build.prop file or something. I've put the build.prop file back to default, and removed the busybox apps, but that hasn't resolved the problem. I've tried re-running the unlock tool, but it fails halfway through. I'm not sure if that's normal or not after you've run it once, or an indication of something messed up.
Any suggestions on what else to try or look at are appreciated.
---------- Post added at 06:06 PM ---------- Previous post was at 05:13 PM ----------
UPDATE: I finally got TWRP 2.2.2.0 to work using the following option from the Instruction Page (http teamw.in/project/twrp2/105):
Download - ADB / Terminal method:
Download the above file. Save it to the root of your /sdcard directly (internal memory only) and rename it to twrp.blob
Launch terminal emulator or connect to your computer and open an adb shell, then type the following:
su
dd if=/sdcard/twrp.blob of=/dev/block/mmcblk0p4
Then reboot to complete installation.

stuck at boot logo
Im having the same issue, i was playing around with black baked bean roms i just installed early that day and i wanted to switch twrp to cwm and by deleting goo manger to get roms manger and install the recovery mod but damn i notice it say asus transformer prime and not infinity noe that think about i thats the reason i cant get into reboot recovery mode damn i fuk up bad. okay so i did the stock recovery boot mode got into that i i remember seeing in this post that someone say try to wipe data and i did that and now im juss stuck asus logo and with
(The Device ist Unlocked.)
Android cardhu-user bootloader <2.10 e> released by "TW_epad-9.4.5.22-20120615" A03
Checking for android ota recovery
Booting recovery kernel image
im just there and when i try to plug into my pc it shut down by self, i even wait till the battery die and hope to god that it well reboot itself and pwaw it reboot nope that ****..can any one please tell what i did wrong or didnt do it would help me alot .THanks a million in advanced

dough30i said:
Im having the same issue, i was playing around with black baked bean roms i just installed early that day and i wanted to switch twrp to cwm and by deleting goo manger to get roms manger and install the recovery mod but damn i notice it say asus transformer prime and not infinity noe that think about i thats the reason i cant get into reboot recovery mode damn i fuk up bad. okay so i did the stock recovery boot mode got into that i i remember seeing in this post that someone say try to wipe data and i did that and now im juss stuck asus logo and with
(The Device ist Unlocked.)
Android cardhu-user bootloader <2.10 e> released by "TW_epad-9.4.5.22-20120615" A03
Checking for android ota recovery
Booting recovery kernel image
im just there and when i try to plug into my pc it shut down by self, i even wait till the battery die and hope to god that it well reboot itself and pwaw it reboot nope that ****..can any one please tell what i did wrong or didnt do it would help me alot .THanks a million in advanced
Click to expand...
Click to collapse
Trying to flash the new CWM recovery, too. Mine gets stuck in the bootloader menu (where you have to choose between Wipe, fastboot mode, and cold startup). Every time I select fastboot it says "starting fastboot usb protocol" and just hangs there.

gaxiolafm said:
Trying to flash the new CWM recovery, too. Mine gets stuck in the bootloader menu (where you have to choose between Wipe, fastboot mode, and cold startup). Every time I select fastboot it says "starting fastboot usb protocol" and just hangs there.
Click to expand...
Click to collapse
Damn u too huh. **** I just got mine for only 2 week old and neva thought I go through this IDK what to do but wait gracefully for the senior member to help or come up with a way for us noobie to unbrick my 650 table...Oh BTW leave it alone then u still lucky if can go thru fast boot mode

I have the exact same problem
anyone has a solution to this problem

gaxiolafm said:
Trying to flash the new CWM recovery, too. Mine gets stuck in the bootloader menu (where you have to choose between Wipe, fastboot mode, and cold startup). Every time I select fastboot it says "starting fastboot usb protocol" and just hangs there.
Click to expand...
Click to collapse
That is what it says when you are in fastboot mode, the rest of the job you do with a computer. Also we have had major issues with cwm on the Prime, I would recommend TWRP!
Sent from my Transformer Prime TF201 using xda premium

Same problem
israodin said:
I have the exact same problem
anyone has a solution to this problem
Click to expand...
Click to collapse
Same problem.
Any help? Please! :crying:

[Q] ROM manager clockworkmod update bricked tf700

Hello there!
I have a TF700T pad, I installed free rom manager application, from within that application I chose to install clockworkmod recovery, the application loaded the clockworkmod recovery from the internet (there was an indicator on top of the application screen).
After finished, I rebooted into recovery, but it doesn't reboot to recovery, it loads android normally, then I tried to boot to recovery manually by pressing and holding the the power button along with the volume down button it loads nothing and stays there for ever!! I did this several times then it it changed and now it doesn't even load the android normally.
And when I boot into APX mode, the adb can't find it!
In short, I can't access recovery nor system!
When I try to boot to recovery
(power + volume down) It freezs and the following shows on the screen:
"The device is unlocked.
Android cardhu-user bootloader <2.10 e> release by "CN_epad-9.4.5.30-20120907" A03
Checking for android ota recovery
Booting recovery kernel image"
- I downloaded the firmware from ASUS and renamed it to "EP201_768_SDUPDATE" and copied to the root of a formated FAT32 micro SD card and tried to boot, but still freezing on above mentioned screen.
- The PC recognizes it (drivers are correct, i downloaded them and installed them) but the adb can not find the pad and tells me to install tap's specific drivers!
- I tried to flash the recovery image image.img through adb, but same problem, it stays there for ever showing the message "waiting for device".
Please, help me with a solution for that situation!
Thank you.

shreef said:
Hello there!
I have a TF700T pad, I installed free rom manager application, from within that application I chose to install clockworkmod recovery, the application loaded the clockworkmod recovery from the internet (there was an indicator on top of the application screen).
After finished, I rebooted into recovery, but it doesn't reboot to recovery, it loads android normally, then I tried to boot to recovery manually by pressing and holding the the power button along with the volume down button it loads nothing and stays there for ever!! I did this several times then it it changed and now it doesn't even load the android normally.
And when I boot into APX mode, the adb can't find it!
In short, I can't access recovery nor system!
When I try to boot to recovery
(power + volume down) It freezs and the following shows on the screen:
"The device is unlocked.
Android cardhu-user bootloader <2.10 e> release by "CN_epad-9.4.5.30-20120907" A03
Checking for android ota recovery
Booting recovery kernel image"
- I downloaded the firmware from ASUS and renamed it to "EP201_768_SDUPDATE" and copied to the root of a formated FAT32 micro SD card and tried to boot, but still freezing on above mentioned screen.
- The PC recognizes it (drivers are correct, i downloaded them and installed them) but the adb can not find the pad and tells me to install tap's specific drivers!
- I tried to flash the recovery image image.img through adb, but same problem, it stays there for ever showing the message "waiting for device".
Please, help me with a solution for that situation!
Thank you.
Click to expand...
Click to collapse
Do you have nvflash backup? if not, I believe you're done. You need to send out for repair.

Thank you for your quick response!
Isn't there any other way I could repair it without sending to ASUS repair?? i originally bought it from CHINA and now i am here in EGYPT!!!

shreef said:
Thank you for your quick response!
Isn't there any other way I could repair it without sending to ASUS repair?? i originally bought it from CHINA and now i am here in EGYPT!!!
Click to expand...
Click to collapse
I'm assuming you've unlocked the bootloader. Can you get the device into fastboot and push a new recovery through that?

shreef said:
Thank you for your quick response!
Isn't there any other way I could repair it without sending to ASUS repair?? i originally bought it from CHINA and now i am here in EGYPT!!!
Click to expand...
Click to collapse
ArmyAg08 said:
I'm assuming you've unlocked the bootloader. Can you get the device into fastboot and push a new recovery through that?
Click to expand...
Click to collapse
That would be the only remaining option, but ROM Manager is known to do this. If a user cannot even read on a forum before doing stuff, I'm not sure this is going to work out very well.
OK. I'll go back to my hermit cave now.

No, I can only boot in APX mode!
Isn't there any way we can make the adb reconize and access the PAD?
I can bring the recovery image and put in the root of the SD card, but what should I name it so the boot can reconize it and update? (the device says "checking for android ota recovery" !!

shreef said:
No, I can only boot in APX mode!
Isn't there any way we can make the adb reconize and access the PAD?
I can bring the recovery image and put in the root of the SD card, but what should I name it so the boot can reconize it and update? (the device says "checking for android ota recovery" !!
Click to expand...
Click to collapse
APX is NOT adb -- you need to issue commands using fastboot. Did you use the manufacturer's switch? "adb devices" won't return anything, even on a perfectly healthy 700. Take a look here:
http://forum.xda-developers.com/showthread.php?t=1926286
and don't forget to use that switch: -i 0x0B05, as in
fastboot -i 0x0B05 <command>
For example, fastboot -i 0x0B05 devices or fastboot -i 0x0B05 reboot
EDIT: APX = FASTBOOT, for clarity.

MartyHulskemper said:
That would be the only remaining option, but ROM Manager is known to do this. If a user cannot even read on a forum before doing stuff, I'm not sure this is going to work out very well.
OK. I'll go back to my hermit cave now.
Click to expand...
Click to collapse
I only asked because I thought ROM manager was known to brick this tablet if you tried to install a recovery with it. I may be mistaken though.
Sent from my ASUS Transformer Pad TF700T

MartyHulskemper said:
APX is NOT adb -- you need to issue commands using fastboot.
Click to expand...
Click to collapse
APX is also NOT fastboot - in APX mode you can *only* use nvflash, but for that you'd need to have created the blob before bricking.

I am sorry, I didn't really understand what you are trying to say!!
What does "manfacturer's switch" mean?
Also, what does APX = FASTBOOT ?

shreef said:
I am sorry, I didn't really understand what you are trying to say!!
What does "manfacturer's switch" mean?
Also, what does APX = FASTBOOT ?
Click to expand...
Click to collapse
shreef, the short answer is that only ASUS can help you now. I believe that is your only solution.
I'm so sorry.

OK, I have sent it to ASUS!
Thank you guys for your care and help.
Regards

ArmyAg08 said:
I only asked because I thought ROM manager was known to brick this tablet if you tried to install a recovery with it. I may be mistaken though.
Sent from my ASUS Transformer Pad TF700T
Click to expand...
Click to collapse
You're right. I wasn't mad/annoyed at your post. I just wanted to point out it has been known for a while now that ROM Manager does funky things on the 700. I'd just stay away from it -- iIn the sense that if one aspect of a program is broken by a device's particulars, changes are relatively high that some other aspect(s) is/are broken as well and you might get to know which one(s) that is/are by first-hand experience.
_that said:
APX is also NOT fastboot - in APX mode you can *only* use nvflash, but for that you'd need to have created the blob before bricking.
Click to expand...
Click to collapse
You're right. I was cutting the curve. I'm sorry for the confusion.
okantomi said:
shreef, the short answer is that only ASUS can help you now. I believe that is your only solution.
I'm so sorry.
Click to expand...
Click to collapse
That is quite the accurate summary.
@OP: hope ASUS treats your device nicely and you can get back in our midst with a 700 working well for you, soon.

[Q] Killed Fastboot??

I tried GOOMANAGER but wasn't rooted and I think that might have screwed up my Fastboot possibly....when I try to do boot into recovery now and select the RCK option I get the dead / sick droid and it says error every time. I don't know what to do now! Any ideas? I also tried to downgrade from 10.6.1.14.10 to 10.6.1.14.8 so I can root and install TWRP and ROMS, but need to get into recovery to do that. I cannot get into Fastboot / recovery to load stuff!!! HELP!!!!!!!!

TerrorTodd said:
I tried GOOMANAGER but wasn't rooted and I think that might have screwed up my Fastboot possibly....when I try to do boot into recovery now and select the RCK option I get the dead / sick droid and it says error every time. I don't know what to do now! Any ideas? I also tried to downgrade from 10.6.1.14.10 to 10.6.1.14.8 so I can root and install TWRP and ROMS, but need to get into recovery to do that. I cannot get into Fastboot / recovery to load stuff!!! HELP!!!!!!!!
Click to expand...
Click to collapse
You are aready in the fastboot mode when you are in the bootloader menu. Look on the upper left corner, you will see the fastboot is active...

LetMeKnow said:
You are aready in the fastboot mode when you are in the bootloader menu. Look on the upper left corner, you will see the fastboot is active...
Click to expand...
Click to collapse
Ok, but I can't do anything from there can I? Don't I have to select one of the three options? RDK Android or Wipe? RDK is what allows you to load zips right? I can not load that it gives me the dead android...

TerrorTodd said:
Ok, but I can't do anything from there can I? Don't I have to select one of the three options? RDK Android or Wipe? RDK is what allows you to load zips right? I can not load that it gives me the dead android...
Click to expand...
Click to collapse
Yes, you can fastboot your custom recovery. Can you tell me what you intend to do with your device? Your rom, kernel, and version?

LetMeKnow said:
Yes, you can fastboot your custom recovery. Can you tell me what you intend to do with your device? Your rom, kernel, and version?
Click to expand...
Click to collapse
I've unlocked the bootloader and I wanted to root it. I'd like to put a custom recovery TWRP and custom ROM probably CM 10.1 or something like that. Currently I'm running stock ROM build JOP40D.US_epad- 10.6.1.14.10-2-13-8-1. (I understand this build is not rootable so I was going to either downgrade or try to load a custom ROM) Kernel version 3.1.10-gb1a9af5 [email protected] #1
When I get to the fastboot menu there are the three options to chose from and when I select the RCK I get the dead droid with error underneath every time. So I have been unable to load anything.

TerrorTodd said:
I've unlocked the bootloader and I wanted to root it. I'd like to put a custom recovery TWRP and custom ROM probably CM 10.1 or something like that. Currently I'm running stock ROM build JOP40D.US_epad- 10.6.1.14.10-2-13-8-1. (I understand this build is not rootable so I was going to either downgrade or try to load a custom ROM) Kernel version 3.1.10-gb1a9af5 [email protected] #1
When I get to the fastboot menu there are the three options to chose from and when I select the RCK I get the dead droid with error underneath every time. So I have been unable to load anything.
Click to expand...
Click to collapse
The dead adroid is the stock recovery. There are two option for you to install the custome recovery.
1. Downgrade your firmware version and use motochopper to get root before using goo
2. Use fastboot to install your custome recovery
Read this thread: http://forum.xda-developers.com/showthread.php?t=2252563
The last few pages have an instruction and link to use fastboot.... Good luck..

and itightu
LetMeKnow said:
The dead adroid is the stock recovery. There are two option for you to install the custome recovery.
1. Downgrade your firmware version and use motochopper to get root before using goo
2. Use fastboot to install your custome recovery
Read this thread: http://forum.xda-developers.com/showthread.php?t=2252563
The last few pages have an instruction and link to use fastboot.... Good luck..
Click to expand...
Click to collapse
Thanks. I'll have to find that. I think that is the main problem for me. I don't think I'm doing the Fastboot thing correctly. Thanks I'll check it out tonight for sure!!

TerrorTodd said:
Thanks. I'll have to find that. I think that is the main problem for me. I don't think I'm doing the Fastboot thing correctly. Thanks I'll check it out tonight for sure!!
Click to expand...
Click to collapse
Ok Scott's too rebooted the machine into Fastboot and the USB Driver is not recognized. I have downloaded the USB drivers from ASUS Sync program and unstalled Sync.
In the top corner it says:
Key driver not found...Booting OS
Android cardhu-user bootloader <1.00 e> released by "US_epad-10.6.1.14.10-20130801" A03
Starting Fastboot USB download protocol
The options at the boot menu are RCK ANDROID WIPE DATA
Not sure how to get the drivers to recognize....without that I'm dead in the water...any thoughts?? I thought for sure that the ones from ASUS would do the trick....
Should I have other menu options at Fastboot?

TerrorTodd said:
Ok Scott's too rebooted the machine into Fastboot and the USB Driver is not recognized. I have downloaded the USB drivers from ASUS Sync program and unstalled Sync.
In the top corner it says:
Key driver not found...Booting OS
Android cardhu-user bootloader <1.00 e> released by "US_epad-10.6.1.14.10-20130801" A03
Starting Fastboot USB download protocol
The options at the boot menu are RCK ANDROID WIPE DATA
Not sure how to get the drivers to recognize....without that I'm dead in the water...any thoughts?? I thought for sure that the ones from ASUS would do the trick....
Should I have other menu options at Fastboot?
Click to expand...
Click to collapse
You are already in the fastboot mode. If you have downloaded scott recovery, you can start using it.

LetMeKnow said:
You are already in the fastboot mode. If you have downloaded scott recovery, you can start using it.
Click to expand...
Click to collapse
But I cannot as the USB does not recognize the device when it goes into fastboot. Works fine when in normal operation I can access the tablet through the USB, but in fastboot it does not recognize it. Can't seem to find a solution all USB drivers I have loaded do not work. Updating the drivers from the window on PC that opens does not work. UGH!!!!!!

TerrorTodd said:
But I cannot as the USB does not recognize the device when it goes into fastboot. Works fine when in normal operation I can access the tablet through the USB, but in fastboot it does not recognize it. Can't seem to find a solution all USB drivers I have loaded do not work. Updating the drivers from the window on PC that opens does not work. UGH!!!!!!
Click to expand...
Click to collapse
Can you explain how you do it? You may miss a step or something..

LetMeKnow said:
Can you explain how you do it? You may miss a step or something..
Click to expand...
Click to collapse
I followed this to the "T"
This is the summary from the Scott post:
1. Download the "install recovery.zip" from the above link
2. Extract it some where on your computer, prefer in the document folder
3. Check and make sure that the "USB debugging" is ticked on your device under the developer option menu
4. Download the TWRP 2.6.1.0.blob file from here: http://techerrata.com/browse/twrp2/tf700t
5. Rename it to "recovery.blob" and put it in same folder with all the fastboot files so that you can use Scott's script
6. Double click on the Scott's script or bat file and follow the instructions on the screen until you see the phrase says "write is okay or completed"
7. When it is finished, you can now reboot your device, done..
When it reboots it will not load drivers and I cannot access the tablet / fastboot.
It shows this at fastboot and I cannot do anything. Happens with script and if I manually do it. I can't use fastboot no matter what I try the USB drivers do not recognize the tablet.
Key driver not found...Booting OS
Android cardhu-user bootloader <1.00 e> released by "US_epad-10.6.1.14.10-20130801" A03
Starting Fastboot USB download protocol
The options at the boot menu are RCK ANDROID WIPE DATA

TerrorTodd said:
I followed this to the "T"
This is the summary from the Scott post:
1. Download the "install recovery.zip" from the above link
2. Extract it some where on your computer, prefer in the document folder
3. Check and make sure that the "USB debugging" is ticked on your device under the developer option menu
4. Download the TWRP 2.6.1.0.blob file from here: http://techerrata.com/browse/twrp2/tf700t
5. Rename it to "recovery.blob" and put it in same folder with all the fastboot files so that you can use Scott's script
6. Double click on the Scott's script or bat file and follow the instructions on the screen until you see the phrase says "write is okay or completed"
7. When it is finished, you can now reboot your device, done..
When it reboots it will not load drivers and I cannot access the tablet / fastboot.
It shows this at fastboot and I cannot do anything. Happens with script and if I manually do it. I can't use fastboot no matter what I try the USB drivers do not recognize the tablet.
Key driver not found...Booting OS
Android cardhu-user bootloader <1.00 e> released by "US_epad-10.6.1.14.10-20130801" A03
Starting Fastboot USB download protocol
The options at the boot menu are RCK ANDROID WIPE DATA
Click to expand...
Click to collapse
You can try to use the window prompt to change the directory to the fastboot.exe folder and type this command to see if you can get to your recovery: fastboot reboot-recovery or fastboot reboot recovery

LetMeKnow said:
You can try to use the window prompt to change the directory to the fastboot.exe folder and type this command to see if you can get to your recovery: fastboot reboot-recovery or fastboot reboot recovery
Click to expand...
Click to collapse
I don't think that will help as the Recovery gives me the dead droid every time. I was trying to replace the recovery in this exercise. This is more of a pain that its worth I think. Phones are so much easier to do this with. UGH!

TerrorTodd said:
I don't think that will help as the Recovery gives me the dead droid every time. I was trying to replace the recovery in this exercise. This is more of a pain that its worth I think. Phones are so much easier to do this with. UGH!
Click to expand...
Click to collapse
Follow this post - - > http://forum.xda-developers.com/showthread.php?p=30260444 <-- if you want to install the drivers.
Also make sure that you have a working fastboot environment and run the command prompt from the folder where fastboot.exe is located. The dead android you are seeing when accessing the recovery it's normal with Stock Recovery, nothing is wrong with your device.
BTW, i suppose that your device is already unlocked because otherwise Fastboot won't work.

Pretoriano80 said:
Follow this post - - > http://forum.xda-developers.com/showthread.php?p=30260444 <-- if you want to install the drivers.
Also make sure that you have a working fastboot environment and run the command prompt from the folder where fastboot.exe is located. The dead android you are seeing when accessing the recovery it's normal with Stock Recovery, nothing is wrong with your device.
BTW, i suppose that your device is already unlocked because otherwise Fastboot won't work.
Click to expand...
Click to collapse
Dead Droid with the word "Error" underneath it is normal?
Yes the device is unlocked. I cannot get into recovery and cannot get Fastboot to work because the stupid USB drivers don't recognize the tablet. Works fine when not in Fastboot mode, but when goes into fastboot no USB. It's maddening!!!!

Yes dead android it's ok.As for the driver just follow the link i posted and install the driver manually,that will solve the driver issue.

Pretoriano80 said:
Yes dead android it's ok.As for the driver just follow the link i posted and install the driver manually,that will solve the driver issue.
Click to expand...
Click to collapse
Will do this tonight when I get home from work and will report back!

TerrorTodd said:
Will do this tonight when I get home from work and will report back!
Click to expand...
Click to collapse
Ok so the problem was that I had the damn keyboard connected and was trying to connect through that. I took that off and UBS recognized immediately!! Going to try and root now etc. I will report back again!
Keyboard connected = BAD

TerrorTodd said:
Ok so the problem was that I had the damn keyboard connected and was trying to connect through that. I took that off and UBS recognized immediately!! Going to try and root now etc. I will report back again!
Keyboard connected = BAD
Click to expand...
Click to collapse
What Windows version are you running? Win 8 doesn't seem to recognize the fastboot drivers, or maybe it was that you have to change the option of Windows only using Microsoft signed drivers?? Can't quite remember. But lots of people were unsuccessful getting fastboot to work in Win8.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4

[SOLVED] Recovery and fastboot problems (soft bricked?)

I was given my friends tablet to try and fix for him. Basically the recovery (TWRP 2.5.0.0) cannot mount any partitions at all (and asks for a password for some reason - can be bypassed with the cancel button). The tablet will boot straight into the recovery mentioning that no OS is installed. I have attempted to boot into fastboot to flash an older version of the recovery (which I've read up on a few websites that say it will fix the mounting problem) however while pressing VOL DOWN and POWER it will boot up to the ASUS logo and no message appears about fastboot in the top-left. I'm out of ideas now and the only way I'll be able to fix this (from what I know) is either by flashing the ASUS firmware or an older version of TWRP via fastboot. Has anyone got any ideas on how I can fix this? Thanks.
EDIT: May be of reference https://github.com/TeamWin/Team-Win-Recovery-Project/issues/138
EDIT 2: I have finally solved the problem! I have quoted the important parts below in case anyone else has the same problem.
Basically I had some problems with the drivers the whole time on Windows 8. So what I did was disabled driver signature enforcement in Windows 8 (I think it re-enables after some time). I downloaded the drivers from this post and followed this other post , specifically this part:
jpasher said:
Making Windows recognize the TF300T
You will need to add the hardware IDs for the TF300T in the driver to make it recognize the ADB interface
Open the file android_winusb.inf in the naked drivers directory.
Look for the section titled [Google.NTx86] (for 32-bit systems) or [Google.NTamd64] (for 64-bit systems)
Add the following lines to make it recognize the TF300T hardware (it doesn't matter where, but I put it after the existing entries for the TF201 APX interface)
Code:
%AsusTransformerADBInterface% = USB_Install, USB\VID_0B05&PID_4C81&REV_0232&MI_01
%AsusTransformerADBInterface% = USB_Install, USB\VID_0B05&PID_4C81&MI_01
%AsusTransformerADBInterface% = USB_Install, USB\VID_0B05&PID_4C83&REV_0232
%AsusTransformerADBInterface% = USB_Install, USB\VID_0B05&PID_4C83
After the information is added, you should be able to install the drivers as usual for the device. If for some reason the device is still not recognized, you'll need to find its hardware IDs and add those to the file.
Click to expand...
Click to collapse
Then I booted up the tablet and connected to my computer. The drivers finally worked! I went into command prompt and typed "adb devices" and the device was there! Then I typed "adb reboot bootloader" and I got into the bootloader.
I had to look for the SKU too and since I couldn't find it cause I couldn't boot into Android it was in really small text in the bootloader at the top. Unfortunately after trying to flash the firmware in the bootloader it would not write over the system every time. So I followed this post instead: http://forum.xda-developers.com/showpost.php?p=49164067&postcount=167
After following the procedure it finally worked! Thanks cmendonc2 and everyone for your help, my friend is happy!

firtvid20 said:
I was given my friends tablet to try and fix for him. Basically the recovery (TWRP 2.5.0.0) cannot mount any partitions at all (and asks for a password for some reason - can be bypassed with the cancel button). The tablet will boot straight into the recovery mentioning that no OS is installed. I have attempted to boot into fastboot to flash an older version of the recovery (which I've read up on a few websites that say it will fix the mounting problem) however while pressing VOL DOWN and POWER it will boot up to the ASUS logo and no message appears about fastboot in the top-left. I'm out of ideas now and the only way I'll be able to fix this (from what I know) is either by flashing the ASUS firmware or an older version of TWRP via fastboot. Has anyone got any ideas on how I can fix this? Thanks.
EDIT: May be of reference https://github.com/TeamWin/Team-Win-Recovery-Project/issues/138
Click to expand...
Click to collapse
What bootloader is it on? It is on the top left corner of the screen wneh you enter the recovery menu in the bootloader.

cmendonc2 said:
What bootloader is it on? It is on the top left corner of the screen wneh you enter the recovery menu in the bootloader.
Click to expand...
Click to collapse
It doesn't say in TWRP recovery. When I boot the device straight up in the top-left corner it saw device is unlocked. However holding VOL DOWN does nothing and the tablet boots straight into TWRP

firtvid20 said:
It doesn't say in TWRP recovery. When I boot the device straight up in the top-left corner it saw device is unlocked. However holding VOL DOWN does nothing and the tablet boots straight into TWRP
Click to expand...
Click to collapse
You can still use fastboot in TWRP, but you will need to find the bootloader in order to figure out which recovery to flash over TWRP. There should be a fastboot command to find out.

cmendonc2 said:
You can still use fastboot in TWRP, but you will need to find the bootloader in order to figure out which recovery to flash over TWRP. There should be a fastboot command to find out.
Click to expand...
Click to collapse
Okay that's good to know. I am still unfortunately not able to get into fastboot. So I'll have to figure out what version the bootloader is before flash the firmware over.

Okay I got access to APX mode (useless from my understanding since my friends has no backups via nvflash), the bootloader while the recovery is loaded (although the driver isn't working for the bootloader), but I CANNOT GET INTO THE BOOTLOADER VIA VOLUME DOWN + POWER. Please help, somebody!

Here's a video explaining my problem.

firtvid20 said:
Here's a video explaining my problem.
Click to expand...
Click to collapse
Have you tried pressing the reset pin, then going into TWRP and going into ADB mode.
Then type ADB reboot bootloader and then try getting into fastboot by pressing volume down.

cmendonc2 said:
Have you tried pressing the reset pin, then going into TWRP and going into ADB mode.
Then type ADB reboot bootloader and then try getting into fastboot by pressing volume down.
Click to expand...
Click to collapse
Hmm I'll give that a go. Is ADB already on when I'm in TWRP? Otherwise how do I get into ADB mode?

firtvid20 said:
Hmm I'll give that a go. Is ADB already on when I'm in TWRP? Otherwise how do I get into ADB mode?
Click to expand...
Click to collapse
Its an option somewhere in TWRP called "ADB sideload".

cmendonc2 said:
Its an option somewhere in TWRP called "ADB sideload".
Click to expand...
Click to collapse
I tried it out but I get the the message "ADB Sideload Complete" and below it a message in red" Failed". I have it plugged into the computer and I didn't hear a connection sound.
I have also looked in Device Manager and there is the Transformer with no driver loaded with it. Further searching using the device information gave me this link: http://binarydb.com/driver/ASUS-Android-Bootloader-Interface-208738.html
EDIT: Found a driver on softpedia and installed it: http://drivers.softpedia.com/get/Ot...iver-4004-for-Vista-Windows-7-Windows-8.shtml Doesn't look like it's working though.

firtvid20 said:
I tried it out but I get the the message "ADB Sideload Complete" and below it a message in red" Failed". I have it plugged into the computer and I didn't hear a connection sound.
I have also looked in Device Manager and there is the Transformer with no driver loaded with it. Further searching using the device information gave me this link: http://binarydb.com/driver/ASUS-Android-Bootloader-Interface-208738.html
EDIT: Found a driver on softpedia and installed it: http://drivers.softpedia.com/get/Ot...iver-4004-for-Vista-Windows-7-Windows-8.shtml Doesn't look like it's working though.
Click to expand...
Click to collapse
While the ADB is attempting to connect, reinstall the naked drivers. If you are on Windows 8, use test mode.

cmendonc2 said:
While the ADB is attempting to connect, reinstall the naked drivers. If you are on Windows 8, use test mode.
Click to expand...
Click to collapse
Sorry, what is test mode? I am on Windows 8.

firtvid20 said:
Sorry, what is test mode? I am on Windows 8.
Click to expand...
Click to collapse
This should help: http://www.wugfresh.com/faq/8/

cmendonc2 said:
This should help: http://www.wugfresh.com/faq/8/
Click to expand...
Click to collapse
Hi cmendonc. I have already disabled driver signature enforcement. I have installed the drivers however I don't think I've had luck with them unfortunately.

firtvid20 said:
Hi cmendonc. I have already disabled driver signature enforcement. I have installed the drivers however I don't think I've had luck with them unfortunately.
Click to expand...
Click to collapse
Hmm. Try using a different USB cable ( if u have it) or a different USB port.

cmendonc2 said:
Hmm. Try using a different USB cable ( if u have it) or a different USB port.
Click to expand...
Click to collapse
I tried out both USB 2.0 and 3.0 ports on my computer but I still have the failed message come up. Any ideas still?

firtvid20 said:
I tried out both USB 2.0 and 3.0 ports on my computer but I still have the failed message come up. Any ideas still?
Click to expand...
Click to collapse
I vaguely remember someone posting that he succeeded to use adb/fastboot by installing a VirtualBox with Linux. You might have to search for the details.
Sent from my TF300T using Tapatalk

cmendonc2 said:
Hmm. Try using a different USB cable ( if u have it) or a different USB port.
Click to expand...
Click to collapse
Just an update. I got it working!! I did the following on this post to the universal drivers and then tried installing them on Windows 8. After booting my tablet to TWRP and plugging it in to my computer ADB works! I can reboot into fastboot now. Now I either have the option of flashing a JB compatible recovery or flashing the Asus firmware...

Since I'm not able to boot into Android would anyone be able to tell me what is the SKU on the picture below? So I can flash the correct firmware.
EDIT: Found it in the bootloader in small text. -.- It was the "WW" version.

tf700 not recognized by pc

I trying to flash my tf700 with a custom rom, since it's terribly slow and barely usable. I've unlocked the device with the asus tool. But when i'm trying to install trwp tablet isn't recognized.
I've installed sdk, naked usb drivers, asus drivers. But nothing works. Is there a way to flash a different rom with having to install a new bootloader?

Depending on what you have now, you may not have to install a different bootloader. But you do have to install a custom recovery and you need fastboot for that.
Driver issues in Windows are frustrating to solve, but don't give up.
1. Try a different USB port. I know, sounds lame, but it has worked for quite a few people.
2. Uninstall Asus Sync and all drivers you have tried so far. Also drivers for older phones/tablets you may still have
3. Try this cool little tool: http://forum.xda-developers.com/showthread.php?t=2588979

When I start the bootloader with powerbutton and volume down I see the following message, is this correct?
Key driver not found.. booting os
Android cardhu-user bootloader (1.00 e) released by "WW_epad-10.6.1.14.10-20130801" a03
Starting fastboot usb download protocol.

Yes, that is the bootloader screen and the tablet is in fastboot mode. Never mind the "key driver not found". That's also normal....

berndblb said:
Yes, that is the bootloader screen and the tablet is in fastboot mode. Never mind the "key driver not found". That's also normal....
Click to expand...
Click to collapse
I have tried several things, installed asus sync, sdk, google usb drivers and a different pc. Nothing works. Is there a different way to install a different rom?
UPDATE:
I did a new install of windows 7 and now my tablet is recognized by the pc. But when I try to install the twrp.blob file with the fastboot method, I get the error invalid argument and nothing happens. And again I'm having the problem that the tablet is not recognized by the pc.
UPDATE 2:
somehow I managed to flash twrp to the tablet after numerous invalid argument errors after using fastboot. I'm now running crombi kk.