Database Info

[RECOVERY] Reverting to original(STOCK) recovery

WARNING: IN THE EVENT THAT ANYTHING GOES WRONG, I WILL NOT BE HELD ACCOUNTABLE. I CANNOT STRESS THIS ENOUGH!!!
EDIT: I FORGOT, BEFORE CHANGING RECOVERY OR DOING ANYTHING, ALWAYS DO A NANDROID BACKUP!!!
If you have flashed a custom recovery (clockwork, j_r0dd, etc.) but you want to
1) accept OTA updates but cant do so with the custom recovery
2) send your phone for repair and not void your warranty
3) or UNROOT YOUR PHONE,
it should be easy to revert back to your stock recovery that came with your phone.
NOTE: THIS PROCEDURE WILL ONLY WORK IF THERE IS AN AVAILABLE OTA UPDATE FOR YOUR PHONE!!!
YOU WILL HAVE TO RE-ROOT YOUR PHONE IF YOU WANT ROOT ACCESS AFTER UPDATING! DO NOT RE-ROOT IF YOUR PHONE IS TO BE SENT FOR REPAIR!
Step 1) Download the OTA update. (I have a uploaded a sample update zip at
www . sidsoftinc . com / Blur_Version.0.3.9.MB300.Retail.en.03.zip
*remove the spaces)
Step 2) On completion, the phone should reboot and enter recovery mode, using the custom recovery to update. However, this should fail as most custom recoveries prevent original updates. Note the location of the downloaded update (likely at /cache)
Step 3) Power down the phone and enter into recovery mode manually
Step 4) Using ADB, pull the folder containing the update zip to your computer
Code:
adb pull /**storedlocation**/**nameoftheupdate**.zip update.zip
Step 5) Open the update.zip in your adb folder and look for a file called recovery.img (most likely in system folder)
Step 6) Open up the adb shell and flash the new recovery (recommended)
Code:
adb shell
su
flash_image recovery recovery.img
or you can place it in /system and it will be auto-flashed (not recommended)
Code:
adb push recovery.img /system/recovery.img
Step 7 (if possible) Make it permanent by deleting the custom recovery in /system
Code:
adb shell
cd system
su
mount -o rw,remount /dev/block/mtdblock1 /system
rm recovery.img
mount -o ro,remount /dev/block/mtdblock1 /system
exit
exit
Step 8) Reboot the phone and if you see a triangle warning sign, reboot your phone again. You should see your homescreen before it reboots to install the update again. This time, the original recovery will be used.
Once finished, your phone will be upgraded, unrooted and your applications and data will still be retained.
If you wish to install your previously used custom rom again, you must flash the custom recovery and install the rom, again
If I made a mistake, please do inform me. Thank you

I'm trying to do this for the Tmo G2 and I have reverted using another technique but the clockworkmod is still there. I thought it would get removed!
I have no idea how to get rid of it. Can you give me alittle help?

Did your clockworkmod recovery flash itself into your nv ram. If so then no one can help you there. If you have an ota update and pulled it to your pc, send me a coy and I'll see if I can help you. If you can, send me your ota update zip to [email protected].
Sent from my Motorola Backflip using the XDA App

I'm honestly unsure if it flashed to the nv-ram. Possibly, basically if I do a system boot (power +vol down) and select recovery, it will load the HTC green text with white background then go into clockword recovery. I'm not exactly sure why it still does this.
I used the method on this FORUM THREAD to un-root and get back to stock (using the available files there and method 1-a). I'm just unsure why the clockwork recovery is still there. I'm hoping I can still get back to stock recovery. Possibly I just need to flash the stock recovery.img??
Also, I had some troubles initially with ADB, which is why I used the VISIONary method of rooting. I'd love to try out the gfree method since I believe my ADB is working correctly now and test out some other roms to see what I like the most.

I know you are probably in a different time zone that is way ahead of mine........but can't I just reflash the stock or update ota recovery.img in fastboot mode.......OR is this a bad Idea???

Many users have accidently accepted ota updates on custom rims and recoveries. for fastboot, I did mention that flashing stock recovery and update is possible via adb shell.
Sent from my Motorola Backflip using the XDA App

siidheesh said:
Many users have accidently accepted ota updates on custom rims and recoveries. for fastboot, I did mention that flashing stock recovery and update is possible via adb shell.
Sent from my Motorola Backflip using the XDA App
Click to expand...
Click to collapse
I tried flashing the stock recovery but I'm not sure why it didn't work, I had hboot and flash_image. I used the adb shell way as well. It gave me error in partitions or whatever. I don't know what to do.

do you have Blur_Version.0.3.10.MB300.Retail.en.03.sbf file?

I dont happen to have that file, but i do have Blur_Version.0.3.9.MB300.Retail.en.03.zip
if you need it.

Cockwork Mod
I'm pretty green so this may sound really dumb, but can you flash sbf files to your phone via Clockwork Mod, or does it have to be done via RSD Lite. I cannot get RSD to recognize my device in 4.7 or 4.8. Please help.

do you have a stock image for the huawei ascend for cricket or does anyone here have it?

Unrooting......
I download the RECOVERY file you supplied (thank you)
"Blur_Version.0.3.9.MB300.Retail.en.03.zip"
If I reboot into Recovery and just flashed that zip file, would it work that way to unroot?

Provided you are flashing on a MOTOROLA BACKFLIP, yes. However, you might want to flash the AT&T 2.1 update for the backflip instead, if you reside in the US. Flashing back any official firmware unroots your phone

I'm looking to root and unlock my AT&F Motorola Backflip (MB300).. Any suggestions?
Sent from my NexusHD2 using Tapatalk

OTA for Samsung Galaxy Ace is a CFG file, not ZIP
Hello,
Just for interest, I received an OTA for my Samsung Galaxy Ace but it didn't come as a ZIP file - it came as a CFG file (which is not a ZIP, but actually a proprietary package - which I can't remember the name right now).
However, I did find the stock recovery elsewhere in this forum, and I installed it. But that wasn't enough for the OTA to be installed - it still fails.

Corrupted?
siidheesh said:
Step 5) Open the update.zip in your adb folder and look for a file called recovery.img (most likely in system folder)
Click to expand...
Click to collapse
I can't find it. I have an Alcatel Pop C1 4015X. Help?

Trying to unroot Xperia Z2
I am trying to unroot using update files from the Sony Xperia Companion. I found the update files (I think). I used Flashtool to decrypt the FILESET, but there is no recovery.img in the decrypted folder. The folder I decrypted is in Xperia Companion/Sony Mobile Update Engine/localstorage/db/13740270 and that is the only folder that has decryptable files. They are named FILE_8977018 and similar before decryption and various .sin .ta files (examples auto-boot.ta, cust-reset.ta, simlock.ta). Am I using the right decryption to get the recovery.img?

Rooting Issue - I9020T [ SOLVED]

Hello,
I am stuck with rooting process. I tried rooting, unrooting before but this time, for some odd reason. I am unable to proceed
I followed this procedure from unlockr website to root the nexus S. Could not post the exact link because of restrictions
Phone is unlocked , USB debugging is ON. ADB mode is working, I can use other commands. But its giving me the following error on step 6 . Line 3
Mount : Operation Not permitted
Attaching image !
When I boot using volume up & Power button and go to Recovery, It gives me exclamation mark & Android Sign... So I cant unroot it either.
I always tried to unroot so I can go back to original state and restart the process. If I flash through recovery.img I can go into recovery but after few steps, I am stuck

Yeah that's normal. The mount command requires root permission (which you don't have yet)
Generally what you have to do after flashing the (right version of) custom recovery is:
copy the su.zip to your SD card
reboot into custom recovery
choose apply zip from SD card and select the su.zip
reboot
That's it.

Su have already been installed in previous step. Infact, I can even see its icon in menu...

Then it sounds like your recovery reverted back to stock. Did you rename the .sh file that rewrites the recovery on reboot? If not, do that using root explorer or any other method you find in the guide. Then flash the recovery again and it will stick.
Sent from my Nexus S using Tapatalk

No I didnot renamed. I was just following the process. I tried to unroot but cant do it either. I am stuck

ahaseeb said:
Su have already been installed in previous step. Infact, I can even see its icon in menu...
Click to expand...
Click to collapse
If su is installed correctly then for the "Mount : Operation Not permitted" problem, you just have to type su in adb shell (there may be a Superuser permission popup on the phone, just allow it) -- the prompt should change from $ to #, which means you are now root. After that the mount command should work.
To make custom recovery stick on every boot, rename /system/etc/install-recovery.sh to other name e.g. install-recovery.sh.disabled

When I typed su it said Permission denied !

Just because you have superuser in your app drawer does not mean you're rooted. You can downloaded from the market on any phone/rom.
You are not rooted.
Flash custom recovery via fastboot
Boot directly into recovery etc.

ahaseeb said:
When I typed su it said Permission denied !
Click to expand...
Click to collapse
Then I suggest you re-install Superuser from Android Market. Normally it shouldn't just say permission denied, there should be a Superuser popup asking for permission.
Or better, try to redo everything following this guide instead.

Again YOU HAVE TO FLASH SU FROM CUSTOM RECOVERY.
Do not install from market. Hell don't even boot up the OS. Flash recovery. Boot directly into recovery and flash su.zip from your phones internal storage/sdcsrd in recovery. The you're rooted.
Now you can update delete/rename the script to make the custom recovery stick. Update su in market or whatever else you want to do.
.

I believe i got it fixed. When ever the phone used to boot after installation of SU, dialogue box to ask for unlock. That dialogue box disappear very quickly. It took me time to figure it out. Thanks, I guess I am good now.
Thanks every one

[Q] Phone stuck in boot loop - trying to update from fastboot. help needed!

Hi,
Last Friday I turned my phone off and when I turned it back on it got stuck on the loading screen and has been like that since.
I tried removing the battery loads, with no joy. I tried factory reset and clearing cache through the recovery menu, still nothing. So now I want to flash it but I'm having trouble.
I can't get the phone to boot so can't use adb to push a file to the sdcard and I'm stuck with fastboot commands (which I'm not that familiar with other than what I've found on here!). I downloaded the OTA update (from links found in these forums) for my phone to take it to 4.0.3 as I thought it was worth doing. I renamed it to update.zip but when I try the command "fastboot update update.zip" I get the message:
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
I then tried the full ROM from this thread: http://forum.xda-developers.com/showthread.php?t=1063664
but got the same message.
I don't know what these missing files are, or if I can create them myself! I've found other threads where people said they used replacements found elsewhere but I don't know where to find them!!
I can't find a way to get the update file onto the sdcard so can't use that recovery option.
I'd rather not have to send it back to samsung as that takes two weeks and I'm pretty sure they'd just flash it anyway!
I have the Nexus S still with stock ROM (2.3.6) and unrooted.
Any help will be greatly appreciated!! Ideally I'd like a way to transfer the update file to the sdcard and recover using the phone recovery. Failing that, I'd like to flash it using fastboot.
cheers

First you need to download this : http://www.4shared.com/zip/2L09-JyW/Root_Nexus_S.html
Just unpack , connect your phone and click run.bat....
After that you need : remove install-recovery.sh just in .....
run in windows-> Start->at the search bar write cmd and navigate into your android sdk is installed
For me :
C:/"Programs and Files (x86)"/Android/android-sdk/tools/>adb shell
# rm /system/etc/install-recovery.sh
#exit
or with Root Explorer into system/etc/install-recovery.sh just renam it (ex. : .sh.old)

thanks for the reply.
What will this do exactly?
I thought adb commands only worked when the phone was booted up?

just had a look at the bat. So it seems this will wipe and root the phone adding superuser privelages?
Is this the only way I can get it working again and once I've done this, how do I undo it as to get the stock version of ICS do I not need to be unrooted or will flashing the stock version from the link in my OP automatically unroot the phone and replace the recovery image etc?
thanks again for your help - I'm a bit of a noob when it comes to rooting and ROMs!

Forgot to say, I have GT-i9020 model if it makes any difference.

Skyap said:
Forgot to say, I have GT-i9020 model if it makes any difference.
Click to expand...
Click to collapse
My tools will root your device and installed CWM ...after that you can do anything you want....

I'm now rooted and have cwm recovery. Had some issues transferring files to the sdcard but seem to have moved a couple of files, but when I try to update using them I get...
Finding update package...
Opening update package...
E:Can't open /sdcard/name-of-file.zip
(bad)
Installation aborted.
I get this whether its the full stock ROMs found on here or the update only packages found on here.
Any ideas?

Skyap said:
I'm now rooted and have cwm recovery. Had some issues transferring files to the sdcard but seem to have moved a couple of files, but when I try to update using them I get...
Finding update package...
Opening update package...
E:Can't open /sdcard/name-of-file.zip
(bad)
Installation aborted.
I get this whether its the full stock ROMs found on here or the update only packages found on here.
Any ideas?
Click to expand...
Click to collapse
Trying to mount sdcard into CWM and see what happens.
---------- Post added at 07:37 PM ---------- Previous post was at 07:34 PM ----------
Reboot into recovery.
Go into "mounts and storage"
Select "mount sdcard"
Select "mount USB storage"
Shortly after your SD Card will be mounted on your computer.

please help my sh-12c stuck in boot
hi my sh-12c stuck in boot wont open could you hrelp me to guide ?
i enable su and and i change permission in settings thats all in hope if morelocal2 works but it doesnt work and was not problem to use but , i restart in hope if it work , but it stuck in the boot logo Auuos moving any way to restore ?

[Q] Question about removing system/bin/recovery?

OK, in the middle of writing up this topic, my situation has suddenly changed. (And changed again.)
The story begins: an old AT&T Samsung Infuse 4G, still on Froyo. Put it through a factory-reset and began to fiddle with how to install Clockwork Mod recovery. So there's the guide to upload a modified 3e recovery.
I run adblinux to push the modified recovery over the stock 3e at "system/bin/recovery" -- but "system/bin" was only in read-only mode and adblinux can't run "mount" and doesn't have permission to enter shell and run "su" (or enter shell as root) and File Manager HD (with Super User privledges) can't modify read-only folder "system/bin".
I managed to find a go around by pushing the modified-recovery into the sdcard's root and going through a terminal emulator on the phone to overwrite the file... but I rebooted the phone without running "chmod" on the newly overwritten file and the Infuse bricked so bad that even the battery in off-state refused to refresh.
I understand and accept what I did should be labelled as 'idiotic', but I did manage to wait at the Samsung logo until adblinux recognized the device and eventually restored the original recovery back to "system/bin" (I also found out adblinux didn't have permission to run chmod in the "system/bin" directory).
So... A few questions before I continue:
Why did (pushing the old recovery) work? ADB initially did not recognized the phone, but then the Infuse came up as "I997ae56e13f recovery" -- why was the name now 'recovery?'
And why does running "./adblinux reboot recovery" brings back the bootloop? (In fact, I cannot enter recovery mode, so something is still wrong -- the recovery file is not 755 and I can't chmod a read-only file-system either from adb or via super-user terminal. The temp-root method times out.)
OK, now I'm going home. I'll probably still try to re-install SuperUser. Maybe that will allow adblinux to run "su" in shell, but I'm not going to try anything too extreme.

Justin20 said:
OK, in the middle of writing up this topic, my situation has suddenly changed. (And changed again.)
The story begins: an old AT&T Samsung Infuse 4G, still on Froyo. Put it through a factory-reset and began to fiddle with how to install Clockwork Mod recovery. So there's the guide to upload a modified 3e recovery.
I run adblinux to push the modified recovery over the stock 3e at "system/bin/recovery" -- but "system/bin" was only in read-only mode and adblinux can't run "mount" and doesn't have permission to enter shell and run "su" (or enter shell as root) and File Manager HD (with Super User privledges) can't modify read-only folder "system/bin".
I managed to find a go around by pushing the modified-recovery into the sdcard's root and going through a terminal emulator on the phone to overwrite the file... but I rebooted the phone without running "chmod" on the newly overwritten file and the Infuse bricked so bad that even the battery in off-state refused to refresh.
I understand and accept what I did should be labelled as 'idiotic', but I did manage to wait at the Samsung logo until adblinux recognized the device and eventually restored the original recovery back to "system/bin" (I also found out adblinux didn't have permission to run chmod in the "system/bin" directory).
So... A few questions before I continue:
Why did (pushing the old recovery) work? ADB initially did not recognized the phone, but then the Infuse came up as "I997ae56e13f recovery" -- why was the name now 'recovery?'
And why does running "./adblinux reboot recovery" brings back the bootloop? (In fact, I cannot enter recovery mode, so something is still wrong -- the recovery file is not 755 and I can't chmod a read-only file-system either from adb or via super-user terminal. The temp-root method times out.)
OK, now I'm going home. I'll probably still try to re-install SuperUser. Maybe that will allow adblinux to run "su" in shell, but I'm not going to try anything too extreme.
Click to expand...
Click to collapse
I am curious how adblinux differs from the linux compiled version of adb. Usually it's just called adb.
Anyway, if you are using a Linux OS, and you pulled the original recovery to your PC before overwriting it, it should maintain it's permissions. Likewise, a push would set the permissions like they were on the host PC as well. They say to chmod afterward, because if you are using a windows packaged/downloaded file, or pushing with a Windows PC, the permissions could be anything in the end (rarely what you really want).
As to why the device name changes, not sure. Device names change based on the ROM installed (not always serial number), so it's not out of the question that recovery could tack on something else.
With above, problem is, even with Linux, it doesn't always line up so permissions can be influenced in a push but you may not get what you were asking for. Try chmod 755 the recovery on the local side and adb push the recovery again, after making a backup of the recovery that is there and see if it continues to bootloop.
If all else fails, as long as you have download mode, you can always use ODIN (or Heimdall) to go back to stock (albeit newer Gingerbread). Option A gives you root only, option D, root + recovery (CWM).
Hope this helps.

Thanks for replying!
joel.maxuel said:
I am curious how adblinux differs from the linux compiled version of adb. Usually it's just called adb.
Click to expand...
Click to collapse
I.. have no idea actually. I don't know how to configure Wine to properly emulate an environment for the Windows ADB and I can't get the correct phone-drivers for my WinXP system. (Kleis won't recognize the rooted phone, though if I leave the phone plugged in while installing Kleis, it will interrupt with a "Samsung Mobile Device connected" message.)
joel.maxuel said:
They say to chmod afterward, because if you are using a windows packaged/downloaded file, or pushing with a Windows PC, the permissions could be anything in the end (rarely what you really want).
With above, problem is, even with Linux, it doesn't always line up so permissions can be influenced in a push but you may not get what you were asking for. Try chmod 755 the recovery on the local side and adb push the recovery again, after making a backup of the recovery that is there and see if it continues to bootloop.
Click to expand...
Click to collapse
Unfortunately I can't chmod and push at the same end.
-I tried changing the permissions of recovery file on my PC, but I wouldn't be able to push it onto the "system/bin" directory in the phone.
-I tried changing the permissions on the existing "/system/bin/recovery" file, but the phone says it's a read-only filesystem.
-I tried chmod from the phone in a different directory, but I can't move the file into the "system/bin" directory (cross-device link), delete the existing recovery file (read-only filesystem), and.. why don't I have the copy command?
joel.maxuel said:
If all else fails, as long as you have download mode, you can always use ODIN (or Heimdall) to go back to stock (albeit newer Gingerbread). Option A gives you root only, option D, root + recovery (CWM).
Click to expand...
Click to collapse
I thought flashing with Odin/Heimdall required access to recovery (to wipe all user data and cache folders either before or after the flash).
Without a recovery mode to boot into, won't I be sunk if things go wrong?
Also, I seem to have a different Heimdall frontend, one that doesn't have slots for PDA. It might be because I'm using an newer/older (1.3.1) edition from Ubuntu 12.04 (the official downloads page only has it for 12.10~13.04 editions of my OS), so I'm probably going to have to command-line it.
Code:
heimdall --verbose flash --factoryfs factoryfs.rfs --cache cache.rfs --modem modem.bin --kernel zImage
Look about right? (No partition image table from the tarball found in that forum link?)

Justin20 said:
I.. have no idea actually. I don't know how to configure Wine to properly emulate an environment for the Windows ADB and I can't get the correct phone-drivers for my WinXP system. (Kleis won't recognize the rooted phone, though if I leave the phone plugged in while installing Kleis, it will interrupt with a "Samsung Mobile Device connected" message.)
Click to expand...
Click to collapse
There is adb for Linux, I think adb is natively Linux anyway (the Windows version being the port). Don't have to worry about drivers if in Linux, due to the native support. If using Debian, Ubuntu (or any other Debian derivative), just need to run:
Code:
sudo apt-get install adb
But judging by immediately below, a different version of ADB probably won't change much.
Justin20 said:
Unfortunately I can't chmod and push at the same end.
-I tried changing the permissions of recovery file on my PC, but I wouldn't be able to push it onto the "system/bin" directory in the phone.
-I tried changing the permissions on the existing "/system/bin/recovery" file, but the phone says it's a read-only filesystem.
-I tried chmod from the phone in a different directory, but I can't move the file into the "system/bin" directory (cross-device link), delete the existing recovery file (read-only filesystem), and.. why don't I have the copy command?
Click to expand...
Click to collapse
'cp' should exist, be interesting if it did not. A different ADB could change the outcome (#1), but as pointed out before, you probably won't get the permissions you wanted in the end. Outcomes 2 and 3 would end up being the same, as the device is mounted read only.
You may get lucky with this:
Code:
adb shell mount -o remount,rw system
If root has any influence with this ADB session, it will remount your /system so you can chmod your recovery file on the device end.
Justin20 said:
I thought flashing with Odin/Heimdall required access to recovery (to wipe all user data and cache folders either before or after the flash).
Without a recovery mode to boot into, won't I be sunk if things go wrong?
Click to expand...
Click to collapse
My understanding is that it is completely separate, as the process will replace recovery to stock as well. But just in case, keep this one as a last resort.
I never used Heimdall, just ODIN through a WinXP Virtual Machine (only heard about Heimdall later), but when I used ODIN, I never had any problem with these generic drivers (adbsetup-1.3):
http://dottech.org/21534/how-to-ins...ows-computer-for-use-with-your-android-phone/

Wow, I wish I took better notes last week. I had to go elsewhere and come back to this project and whatever progress I had made, I think I'm starting over from scratch.
I still can't mount/remount the system folder from anywhere (via ADB under Win/XP and Linux/Ubuntu 12.04); running "su chmod" from the phone still gives a permission denied, changing from Superuser to SuperSU didn't do anything (both programs did find the SU binary to be outdated), and adding a Busybox APK did not add a 'copy' function to my terminal emulator (on the phone) so running an ADB shell would be limited in that regard as well.
I'm going to have to take the phone to a McDonald's and attach a Google account to it. (I would have liked to have done all this offline somehow.)
joel.maxuel said:
when I used ODIN, I never had any problem with these generic drivers (adbsetup-1.3):
http://dottech.org/21534/how-to-ins...ows-computer-for-use-with-your-android-phone/
Click to expand...
Click to collapse
How did you manage to get your virtual OS to go "online?" When I tried installing the Google device drivers that came with adbsetup, a big red "X" popped up (Install failed).
I saw that there was a Java-based ODIN, but it's Java 8.0. Should I be using a later/earlier version of Odin/Heimdall? The latest versions don't support my OS (surprising since they support the latest, 14.04, and 12.10 but not anything between or 12.04, the other big release). The existing XDA threads all use Odin/Heimdall 1.1 -- the 1.3 version I have does NOT look like that (and does not have the "PDA" options in the GUI).

Justin20 said:
How did you manage to get your virtual OS to go "online?" When I tried installing the Google device drivers that came with adbsetup, a big red "X" popped up (Install failed).
Click to expand...
Click to collapse
Did the adbsetup binary change? I remember a DOS install process, so there shouldn't have even been a setup wizard (graphical anyway).
Anyway, to get the virtual OS to recognize, need to right click on the devices icon on the bottom status bar (at least in VirtualBox), looks like a USB drive, and select Android, or whatever pops up.
Hope this helps. Also, did the shell remount mentioned earlier have any effect (using adblinux)?
Sent from my Asus MeMO Pad 8"

joel.maxuel said:
Did the adbsetup binary change? I remember a DOS install process, so there shouldn't have even been a setup wizard (graphical anyway).
Click to expand...
Click to collapse
The DOS prompt process begins a driver install. From there, the Setup Wizard popped up.
joel.maxuel said:
Anyway, to get the virtual OS to recognize, need to right click on the devices icon on the bottom status bar (at least in VirtualBox), looks like a USB drive, and select Android, or whatever pops up.
Click to expand...
Click to collapse
Another bad sign: nothing pops up.
As for using mount/remount, the option "remount" was not found. (It would scroll down the whole list of options and switches.)
I think it's time for me to give up the ghost on fixing this issue. I still don't know how I managed to foul it up in the first place because I tried repeating it (entering the command-prompt from the phone, entering superuser, and moving files into "/system/bin") to no avail. So there is a modified 3e recovery file in "/system/bin" without the correct permissions that's preventing the phone from entering recovery mode (and slowing up the boot-up process and "battery recharge" icon when powered off), but other than that the device works, so that's something.
I still would like to try flashing the entire thing with ODIN/Heimdall if I could get either to work. (I ran the latest Heimdall, 1.4.0 32-bit, under WinXP only to find it was not a valid binary. The various Open Disk-Imager in a Nutshell (ODIN) apps out there, but nothing looks like those used on these forums (and did not include a PDA option).

Justin20 said:
The DOS prompt process begins a driver install. From there, the Setup Wizard popped up.
I still would like to try flashing the entire thing with ODIN/Heimdall if I could get either to work. (I ran the latest Heimdall, 1.4.0 32-bit, under WinXP only to find it was not a valid binary. The various Open Disk-Imager in a Nutshell (ODIN) apps out there, but nothing looks like those used on these forums (and did not include a PDA option).
Click to expand...
Click to collapse
The correct version of ODIN will be packaged with whatever image you choose. Just find a windows machine lying around, install the adbsetup drivers, and flash away. Hope this helps.

[Completed] [Q] Can't get into recovery; very strange flickering issue

Hey everyone, I have this very strange issue
The other day I made a nandroid backup because I wanted to mess around with some stuff I wasn't sure was going to work. I then restored the backup, and tada, bootloop. I was stuck on the boot animation. Tried a deleting data/dalvik/cache from recovery (CWM 6.0.4.7), installing rom again, but nothing worked.
Now, what I did may or may not have been smart. I wiped everything using "wipe userdata" in the adb shell. Everything gone. Now I want to put on a working rom again, but I can't. Two problems:
1. My CWM recovery is doing this . Not only when I boot into it trough bootloader, but, maybe this is because I don't have a working rom, it also seems to go into it after my bootloop attempts to boot twice, as seen here.
I have no idea what's happening and why and how. It just keeps flashing like this and I can't access the menu. I tried reflashing, flashing the touch version, flashing TWRP which doesn't have default adb access, and flashing it once again but same result. So I can't choose a rom to flash. How do I fix this?
2. I can still push files to /data/media/ and /sdcard/, but after that I have no way to install them. No tutorial I found seemed to work, e.g this one from xda says I have to mount /data/ but when I do that I get
> C:\sdk\platform-tools>adb shell
~ # mount data
mount data
mount: mounting /dev/block/platform/msm_sdcc.1/by-name/userdata on /data failed:
Invalid argument
And I've also done this one which states the rom should install, but it doesn't. The cd and push are successful, but I can't do anything with it. I also think my /sdcard/ got unmounted at some point, but I was able to push a file to it so not sure here.
Does anyone know how to fix this. I have no idea what to do, pretty hopeless at this point. Thanks so so much if you have any tips
-Josh

Duplicate.
http://forum.xda-developers.com/general/xda-assist/bootloop-nandroid-restore-tried-t3153174