Related
Hi,
I dont know if am being really stupid or not but this is my first android device and first time rooting.( i have searched for hours now trying to find an answer)
So i am trying to root my Lg G2x running GB 2.3.3 using this link :http://forum.xda-developers.com/showthread.php?t=1255214
so as of now i am on Step 2...what i dont get is when i click the link on step 2 it says to download ALL of these NVIDIA drivers and everything. All i did was downlooad the One Click CWM
Another thing this link does is send me to ANOTHER link saying that you have to ROOT first?
So from my previous knowledge i thought you could only "flash" the CWM if you were already root ( or maybe thats only for the ROMs)
alright then if thats the case...the directions of the original link just says to download and unzip...but do i put that root folder onto my phone(i read this from another link that someone else posted about)..The reason i am asking this question is because when i tried to go to Step 3 it said to Hold Volume and Power to boot CWM but nothing happened obivously bc 1. the directions say to plug the phone into computer at like step5 and 2. the files are on the computer
So in conclusion i guess i am just trying to make sure that i dont brick my phone by asking these lame questions
1. do i have to take those unzipped files and put them onto my Phone( more specifally, my sd card or phone?)
2. What about for the CWM download.. do i just download the One Click thing and ignore the other directions??
You have to do the one click thing first to install Clockwordmod with NVFlash.
http://forum.xda-developers.com/showthread.php?t=1056847
Then you boot into Clockwordmod Recovery and run my booting zip.
http://forum.xda-developers.com/showthread.php?t=1255214
In that thread just download the root zip and put it on your sd card or in the internal memory of your phone. Flash the CWM recovery and then boot into Clockworkmod Recovery by holding down volume down and power until fancy LG logo shows (about ten to fifteen seconds). Find the menu option to flash a zip from sd card or internal memory (wherever you put my rooting zip). Select it, flash it and reboot when finished.
Presto. Done. You are now rooted.
THANK YOU!!!
I GOT IT YAY i AM ROOTEd
i was just overreading and kept reading every word on the posts lol when all i had to do was follow the APX driver installation, FLASH the cWM , and then BOOT IT!!!
THANK YOU!!!!
bball123 said:
THANK YOU!!!
I GOT IT YAY i AM ROOTEd
i was just overreading and kept reading every word on the posts lol when all i had to do was follow the APX driver installation, FLASH the cWM , and then BOOT IT!!!
THANK YOU!!!!
Click to expand...
Click to collapse
Flashing CWM and rebooting does not root your phone. You have to flash the root zip also, or flash a rooted rom.
Ok i am completly lost trying to root my g2x. I'v tried downloading the flasher yet nothing. I just need a step by step on doing this. Thanks!!
jaypro954 said:
Ok i am completly lost trying to root my g2x. I'v tried downloading the flasher yet nothing. I just need a step by step on doing this. Thanks!!
Click to expand...
Click to collapse
The original thread for the one-click flasher in the development section is one of the best step by step posts ever made on XDA. It even has a link for a video tutorial. If you cannot follow that then I suggest you stop trying to root your phone. There is no reason for anyone to make another step by step guide. To find the thread try the search button. There are also links to it in numerous other threads.
Are their roms on here that are bug free and stable for daily drivers?
Im coming over here from a HD2 which is not a native android phone. And I didnt mind the bugs in android.
But now I have a g2x and it is bug free though I really wish it had 2.3.5 but oh well this phone is still bad ass.
So what im wondering if I should just root to keep it stock and do lil mods or flash the whole cwm Process so I have a back up. If I ever need it.
Thanks in advance.
tdizzle404 said:
Are their roms on here that are bug free and stable for daily drivers?
Im coming over here from a HD2 which is not a native android phone. And I didnt mind the bugs in android.
But now I have a g2x and it is bug free though I really wish it had 2.3.5 but oh well this phone is still bad ass.
So what im wondering if I should just root to keep it stock and do lil mods or flash the whole cwm Process so I have a back up. If I ever need it.
Thanks in advance.
Click to expand...
Click to collapse
I've kept mine stock for that reason, but I did root it. After experiencing custom roms on my Nexus One, A71 variant and others, I would have to say the frustrations stuff being perpetually broken, bugs and the monotony of daily flashing (CM7 just never stops) whatever small benefits the custom roms have (i.e., eye candy, additional settings, etc.) is just not worth the frustration and danger of soft-bricking the phone (I have hard bricked one also) to me. My Nexus One (gave one to wife when I got the G2X but then got another one at a steal) has gone through updates to 2.3.4 and 2.3.6 (yesterday). These updates seem to be mostly internal fixes for stuff. The average user (or even advanced) is not going to notice any difference in using the rom. The only exception to that is that in 2.3.4 Google removed the need to log back into your Gmail account(s) after changing sims. They said that was a minor benefit at a greater annoyance and the "feature" most complained about by world travelers. Other than that the Google apps get updated and even 2.2 devices are basically running the same Google apps as 2.3.X. So based on what you said above, I would suggest keeping it stock and simply rooting it. You definitely want to change recovery to Clockworkmod to make backups and the fact that going into stock recovery on this device does a factory reset (how stupid was that LG).
jboxer said:
I've kept mine stock for that reason, but I did root it. After experiencing custom roms on my Nexus One, A71 variant and others, I would have to say the frustrations stuff being perpetually broken, bugs and the monotony of daily flashing (CM7 just never stops) whatever small benefits the custom roms have (i.e., eye candy, additional settings, etc.) is just not worth the frustration and danger of soft-bricking the phone (I have hard bricked one also) to me. My Nexus One (gave one to wife when I got the G2X but then got another one at a steal) has gone through updates to 2.3.4 and 2.3.6 (yesterday). These updates seem to be mostly internal fixes for stuff. The average user (or even advanced) is not going to notice any difference in using the rom. The only exception to that is that in 2.3.4 Google removed the need to log back into your Gmail account(s) after changing sims. They said that was a minor benefit at a greater annoyance and the "feature" most complained about by world travelers. Other than that the Google apps get updated and even 2.2 devices are basically running the same Google apps as 2.3.X. So based on what you said above, I would suggest keeping it stock and simply rooting it. You definitely want to change recovery to Clockworkmod to make backups and the fact that going into stock recovery on this device does a factory reset (how stupid was that LG).
Click to expand...
Click to collapse
Thanks J you have been very helpful in my transition from hd2 to g2x"im still flashing hd2 I love playing with sense 3.0 and 3.5" But this phone is amazing. Ive rooted it and added cwm but have not flashed any cutom rome I like stability over newest features.
Is 2.3.3 the most recent update for our Phones?
Yes and we're darn lucky we have 2.3.3. No other 2X variant worldwide has received any update love from LG. They are all still on 2.2.x. Lawsuit in U.S. seems to be what forced LG into releasing the G2X GB update.
Sent from my LG-P999 using Tapatalk
Hey J
If this is the wrong place to ask please pm me but, would you mind letting me know what tweaks you have done "if any" you have done to your stock rom?
I am posting to say that I just successfully rooted my Captivate....
KK4 Kernel
Gingerbread 2.3.5 (Now rooted!)
As you can see I'm super excited and this is why!
Thanks to this forum! Flashing AT&T Stock Gingerbread; now KK4, Gingerbread 2.3.5
And to nakedninja42 !
I AM NOT RESPONSIBLE TO WHATEVER HAPPENS TO YOUR PHONE.
HOWEVER, THIS WORKED LIKE A CHARM ON MINE!
So first I ....
Updated via Kies....First to Eclair then to Froyo bc I was coming from a custom.
Begin by putting it in Download mode!!!!!
1: Flash I897UCKF1-AutoRoot-DesignGears.tar for root with Odin by Placing it in the PDA slot
CLICK START.
2: Boot once, (it will install root) then shut down.
3: Download mode again!
4: Reflash the original KK4 kernel by placing it in the PDA slot in ODIN (If you do not change the kernel back to KK4 after root, you could have wifi issues)
CLICK START.
vvvvvvvvvvvv THE REST ARE nakedninja42's INSTRUCTIONS vvvvvvvvvvvvvv
5:Settings>Applications> enable Unknown Sources
7:You can also Update Superuser from market (may be updated already) https://market.android.com/details?i...=search_result
8: Install busybox from market
I just read the other forum saying that the kernel build date is different than the leak. I had not seen that previous to our conversation. The tar for the stock KK4 I provided is from the leak update. I am still working on decrypting the kies update I obtained from the Samsung server. Glad its working, let us know if you experience any weird issues.
Sent from my SGH-I897 using xda premium
That information is completely incorrect. The leak and the official release are identical.
Time_Zone said:
That information is completely incorrect. The leak and the official release are identical.
Click to expand...
Click to collapse
I thought that as well since the build.prop had the same date. But someone in the other thread said the kernel was a different build date. If it works, awesome!
UPDATE
It has been working great guys!
I installed BusyBox and installed all my apps with TB.
So happy!
The version listed in the build.prop was different between the leak and AT&Ts release at least when i checked before and after my update, but it is possible my experience waa unique. Regardless, there was not enough of a difference between the kernels other than that to say that they are in fact different in way other than that. I will say that i have been running root via the old fugu method and the leaked kernel since the day it came out and it has been flawless. I still have noticed increased stabilty on the official vs leaked but have no idea why as i restored all my apps and settings the same as before.
Sent from my SAMSUNG-SGH-I897 using xda premium
Thank you for posting these instructions! Worked like a charm for me! I just wanted to be able to get rid of all the AT&T bloatware. Thanks Again.
Johnny
Thank you for posting the instructions! Worked for me also.
worked perfectly last night
Thank You
Samsung Captivat Galaxy S
Update to froyo from Keis then to Gingerbread
now rooted thanks to You.
Best this phone has ever worked!
official 2.3.5 gingerbread Cappy w/Root
I followed the instructions in the OP.
Thank you
After doing some research I decided this was the cleanest way to go, I'm fairly happy with stock roms minus the bloatware. Just my personal preference since I don't want to put a lot of time into trying different roms, at least not at this time. Only thing I didn't check was the kernel version from the official compared to after this process. I read some posts that the leaked was the same as the official rom but then another person noted that the official version seemed to be a little less buggy/stable. Maybe just a software/settings issue and not kernel. Not sure. But I am restoring my titanium backup right now loading the apps w/out data to prevent any conflict. I am also being very selective about what system data I restore just as a precaution.
To enter download mode easily, I used a command prompt to execute "adb reboot download" from an adb folder i copied out of SuperOneClick. I moved the folder to a more convenient location for accessing it from the command prompt, and to keep files and tools organized together.
One note about my experience with the official gingerbread 2.3.5 release.
I was running stock/official 2.2 rooted and gcalender would only sync or display my default "account name" calender. After using Kies mini to upgrade to 2.3.5 I thought it would be fixed since that was suppose to be one of the issues addressed in gingerbread. To my surprise even after syncing the calendar options did not change. I was saddened, so I performed a factory reset wiping all my apps and data, however! After setting up my google account through the first run/start up wizard (not sure it matters but what I did) and all my calendars show up. I guess the only question left, regarding calendar sync is will it continue to add new calendars as I add them on the server.
Time will tell, Good luck!
Thank you! I upgraded to the new gingerbread this morning via kies and quickly realized I had lost my phone being rooted! I followed your instructions exactly and rooted with no issues! Thanks you again!
I used this method today and it worked great! Thanks alot!
I just install Corn kernel with odin. Then go to recovery and in one of the menus are the option to install root.
Reboot and done.
Sent from my SAMSUNG-SGH-I897 using XDA App
wove I was waiting for the rooting, wanted get rid of the bloatware as soon as I upgraded to KK4.
froggy3hope said:
I am posting to say that I just successfully rooted my Captivate....
KK4 Kernel
Gingerbread 2.3.5 (Now rooted!)
As you can see I'm super excited and this is why!
Thanks to this forum!
Click to expand...
Click to collapse
THANK YOU!!!!!!!!!!!!! It works great!!!!
Finding Odin + Loss of Apps and Info
Hi sorry if this is a basic question but I'm a noob. Where can I find Odin to root my Captivate 2.3.5, and in doing the steps will I lose my apps, info etc, and if I do is there a way to back it up before rooting ?
Thanks in advance
Pnutman87 said:
Hi sorry if this is a basic question but I'm a noob. Where can I find Odin to root my Captivate 2.3.5, and in doing the steps will I lose my apps, info etc, and if I do is there a way to back it up before rooting ?
Thanks in advance
Click to expand...
Click to collapse
ODIN http://www.multiupload.com/SAU3WNKR9E.
Rooting should not clear your apps or anything.
Please delete!
I thought I was in the LG O2X thread because this thread was recommended whole I was trying to start a new one!
Sorry.
Ok thanks for the info! I was worried about that, and thanks again for the link to Odin
Yay! This worked! Now to look for clockwork mod recovery.....
Hello, XDA! and, even though we haven't met yet, THANK YOU SO MUCH FOR THE STUFF ON MY PHONE!!!!!! This is my first, and dreaded post.
I'm new to smartphones. My first was an iSUCK 3g. Now, I have the SGS4G! I'm totally new to this wprld, and every day, I'm being blown away by something new. Anyways, I have read two guides on this site already, but I'm still suffering from a little confusion. I think my problem comes from when I first rooted my phone. I was in a hurry to root it, because I needed to unlock the carrier permissions, so I could use my ATT sim. I hadn't found this site yet, sadly. I had tried a few things, to no avail, until I came across a you-tube video with some kid showing me how it's done, and other littler kids screaming in the background. Following the video step, by step, got it done, but he failed to go over, and explain what we were actually doing. Now, I don't know what ROM I have, or what kernel. It's not a big issue, because this phone now totally blows me away, especially the launchers.
I really enjoy this phone over the iSucks, becuase I like computers, and I'm more tech savvy than most. Perhaps that's where more of my confusion comes from... the terminology. So, on to the issue:
My RAM seems to run unusually high! with the GOtskmanager, it's always clocking between %72 - %79. I got RAM Manager Pro, which sometimes brings me down to %65 - %69, but it usually doesn't last long. I think I have it nailed down. I think it comes from certain apps that seem to run themselves. I have auto sync off, and I've DONE MY RESEARCH (some of which, I've yet to comprehend) I know not to use a task killer to routinely kill apps, and I know how the OS works, and allocates its RAM. So, I won't even worry about it if someone says these levels are normal.
Any tips on what I should do with my new phone? I saw a video that I can't find again, where this guy had his homescreen set up in such away, that the apps made this 3d cube of tiny boxes (apps) that moved like a rubik's cube. HOW DO I DO THAT!? It's not in any of the launchers I've tried. Anyways, thank you once again, XDA, you guys are awesome. I'm just a newb. Thank you to the users who made the guides!!
Ram is at 84% right now, NOT DOING ANYTHING!
Look at my guide that i have linked in my sig and read through the second post to find a custom rom that you like (i suggest Valhalla Black) and my guide tells you how to flash it. If you have questions, feel free to ask in the guide thread or pm me
And I believe the 3d cubes are part of SPB Shell launcher
Sent from my SGH-T959V using xda premium
Thank you Julz! I have read your guide thoroughly. I know to search, and research before asking questions. Like I said, I'm just slightly still confused. Did I not put a custom ROM on my phone when I rooted it?
Do I have to factory restore, or uninstall the current ROM in some way before getting another?
Also, I think I fixed the RAM issue. What is normal levels for my device? I can't find normal RAM levels listed anywhere on the net for my device.
Read the first link in my signature as an addition to Juls' guide. After rooting GB you need a custom kernel. Look for SGS Kernel Flasher in either guide to take your next step.
I think you should research more. But to help you a bit...
How you rooted your phone? You know about ClockWorkMod Recovery? Know about Odin or Heimdall?
Also, there is a section in Setting that tells a lot of your phone that is called About Phone.
chris31jct said:
I think you should research more. But to help you a bit...
How you rooted your phone? You know about ClockWorkMod Recovery? Know about Odin or Heimdall?
Also, there is a section in Setting that tells a lot of your phone that is called About Phone.
Click to expand...
Click to collapse
Firmware: 2.3.6
Baseband: TE59VUVKJ6
Kernel: 2.6.35.7-sms-kj6-vo.1.0+
Build: GINGERBREAD.VUVKJ6
I used Heimdall to do this, as per the video guide I followed. I just downloaded Odin, for future tasks. I love the Norse theme to this stuff, I know the Eddas practically by heart, as well as the elder Futhark, and actual history of the ancient Scandanavian Vikings.
Be sure to keep your ODIN and Heimdall ports seperate. You can get by with CWM for custom ROM's now except to recover or clean your phone up. Read the Gremlin Remover thread to consider using after a custom ROM flash or two. Your other option is KJ6 Heimdall One-Click.
lumin30 said:
Be sure to keep your ODIN and Heimdall ports seperate. You can get by with CWM for custom ROM's now except to recover or clean your phone up. Read the Gremlin Remover thread to consider using after a custom ROM flash or two. Your other option is KJ6 Heimdall One-Click.
Click to expand...
Click to collapse
Thank you very much for the tip. Advice heeded! Now, do you know anything about my ram? Why my Go Task mnger is always reading that my RAM is almost always above 70% used?
Read the guide I mentioned above. Get on a custom ROM. Then look at RAM. You are on stock bloated ROM at the moment.
lumin30 said:
Read the guide I mentioned above. Get on a custom ROM. Then look at RAM. You are on stock bloated ROM at the moment.
Click to expand...
Click to collapse
I've read the guides, the only thing I don't understand about that process, is that, will I need to set up all my apps again, am I starting my phone from scratch? Which ROM would you personally suggest?
When I'm using a custom ROM, am I restricted in any way? Can I still use the market?
Did you read the guide in the first link in my signature as suggested above?
It is best to start fresh when flashing a new ROM. A lot of apps have back up features within the app for settings and such (i.e. GoLauncher).
I recommend Valhalla Black. But all the 2.3.6 ROM's are great.
No restrictions. Except maybe watching movies in the market on rooted devices.
lumin30 said:
Did you read the guide in the first link in my signature as suggested above?
It is best to start fresh when flashing a new ROM. A lot of apps have back up features within the app for settings and such (i.e. GoLauncher).
I recommend Valhalla Black. But all the 2.3.6 ROM's are great.
No restrictions. Except maybe watching movies in the market on rooted devices.
Click to expand...
Click to collapse
I didn't read that guide, becuase I'm not on Froyo
Read it.
One more thing. You say start from scratch... Factory Reset? So I will need to root again? Also, I had to unlock the phone to use with ATT. Will I have to do that again?
I mean with your apps. Factory reset won't unroot you. It isn't a bad idea to do a factory reset between flashings as a precautionary measure.
You shouldn't have to unlock again either.
Wodensman said:
Also, I had to unlock the phone to use with ATT. Will I have to do that again?
Click to expand...
Click to collapse
I'm on ATT as well and flash my phone all the time. I've never lost the unlock.
My brother, thank you so very much for the info! I have been reading the guide you mentioned, and now I know why. 2 guides in there! I can't thank you enough, I've hit thanks on all your replies here, because little by little, you're really helping my understanding of it all. It must be frustrating trying to help people like myself! Thanks for trying to push this stuff through my thick head! However, I've encountered another problem, following your guide:
Trying to back up my efs folder, using Astro File Manager... says it cannot do it! I guess this means I need something that requests superuser permissions?
Any program you would recommend? or can I just do it manually with my computer, like save it on my comp or something?
I recommend starting where it talks about SGS Kernel Flasher. Then once you have the custom kernel with CWM - do and nandroid back up and save the nandroid back up on your computer for safe keeping. That will have your efs folder within it. And I recommended Super Manager
And flash this kernel -
http://forum.xda-developers.com/showpost.php?p=25115050&postcount=1
I guess the kernel I have, doesn't have CWM. So, if I flash a new one, do I need to delete the one I have first or anything? Or just go about flashing a new one, like I never did one in the first place? I can try to find the video guide I followed if you think it will help.
Okay I have been searching the forums and Google for a while now and normally I would make all attempts to avoid posting but I have yet to find my answer. I have conflicting answers for a few of the other questions as well.
I just rooted my Samsung infuse 4G I am running Firmware version 2.2.1 I997UCKH1 I noticed when I connected to Kies Mini after plugging in my phone and selecting the kies update option that my phone had a firmware update.
It is telling me that the update is I997UCLB3 so now my question because I have conflicting answers. Some posts claim if you are already rooted this firmware update wont remove your root. Others claim you need to root it again but you are unable to do it with SOC so what is true here.
Next question is it worth the update to this new firmware or should I just run what I have and leave well enough alone. I was thinking about running a custom rom or Kernal at some point but I have yet to do enough research to do it. So I do not have any plans as of now to run anything other then the stock. I only rooted my phone for some applications like Adaway and what not.
Thank you for any direction everyone might give me.
Ok i suggest don't use the kies...there has been more prob listed with peps using that methods, check my signature for the stock, root with latest gb.
Or if you wasn't custom ROM, you will need
Cwm, Again check sig for one click or odin with cwm...
ac19189 said:
Okay I have been searching the forums and Google for a while now and normally I would make all attempts to avoid posting but I have yet to find my answer. I have conflicting answers for a few of the other questions as well.
I just rooted my Samsung infuse 4G I am running Firmware version 2.2.1 I997UCKH1 I noticed when I connected to Kies Mini after plugging in my phone and selecting the kies update option that my phone had a firmware update.
It is telling me that the update is I997UCLB3 so now much question because I have conflicting answers. Some posts claim if you are already rooted this firmware update wont remove your root. Others claim you need to root it again but you are unable to do it with SOC so what is true here.
Next question is it worth the update to this new firmware or should I just run what I have and leave well enough alone. I was thinking about running a custom rom or Kernal at some point but I have yet to do enough research to do it. So I do not have any plans as of now to run anything other then the stock. I only rooted my phone for some applications like Adaway and what not.
Thank you for any direction everyone might give me.
Click to expand...
Click to collapse
Okay
Okay thank you I will read up more on CWM before I look into this much more. I take it by your reply though I should update to the newer GB firmware. I also remember reading some place I will need to reroot my phone with CWM or something to that so I take it by your reply I will need to reroot my phone as well huh.
Edit: Oh dear I am reading into this CWM and everything. It seems like a lot more trouble I will keep reading and doing the research but as it stands it almost seems like too much trouble for a firmware update e.e I was stressing enough when it came to rooting it let alone updating firmware. LOL
http://forum.xda-developers.com/showthread.php?t=1629079
Look here there are many options to use one click to put latest gb and root, cwm..
Try this one. Option "C" has everthing included.
http://forum.xda-developers.com/showthread.php?t=1613523
IIRC, using Kies to upgrade removes root and any possibility of re-rooting that firmware. There's something in Sammy's UCLB3 update that prevents re-rooting, but JScott has a complete UCLB3 package with CWM Red and all listed here.
In my opinion, I would flash UCLB3 via Odin in the above linked post, come back and get on Entropy's CM9 or any other Ice Cream Sandwich based firmware. It's at a point now where just about everything works and what doesn't is being fixed or patched as we speak. I run it as a daily driver and I could NEVER go back to GB or Froyo, it's just THAT good!
PoXFreak said:
IIRC, using Kies to upgrade removes root and any possibility of re-rooting that firmware. There's something in Sammy's UCLB3 update that prevents re-rooting, but JScott has a complete UCLB3 package with CWM Red and all listed here.
In my opinion, I would flash UCLB3 via Odin in the above linked post, come back and get on Entropy's CM9 or any other Ice Cream Sandwich based firmware. It's at a point now where just about everything works and what doesn't is being fixed or patched as we speak. I run it as a daily driver and I could NEVER go back to GB or Froyo, it's just THAT good!
Click to expand...
Click to collapse
+1
PoXFreak said:
IIRC, using Kies to upgrade removes root and any possibility of re-rooting that firmware. There's something in Sammy's UCLB3 update that prevents re-rooting, but JScott has a complete UCLB3 package with CWM Red and all listed here.
In my opinion, I would flash UCLB3 via Odin in the above linked post, come back and get on Entropy's CM9 or any other Ice Cream Sandwich based firmware. It's at a point now where just about everything works and what doesn't is being fixed or patched as we speak. I run it as a daily driver and I could NEVER go back to GB or Froyo, it's just THAT good!
Click to expand...
Click to collapse
Hi. I am a complete noob and have watched the tutorial vid, read and subscribed to the noob and samsung introduction threads. I joined this site with a specific goal. To get rid of this annoying Facebook app that won't uninstall and to be able to install custom apps or games etc that I normally wouldn't be able to. I would also like to finally be able to use my phone as a tethering device.
So, following the link you posted, Option D looks like my best choice. Would option D allow me to do all of what I said?
************ OPTION D *************
I997UCLB3-CWM-root-deodex.rar
Features in this version
- Entropy's Daily Driver kernel
- Red CWM recovery
- Rooted
- Deodexed
- Zipaligned
- Busybox
- Get extra mods HERE
8thos said:
Hi. I am a complete noob and have watched the tutorial vid, read and subscribed to the noob and samsung introduction threads. I joined this site with a specific goal. To get rid of this annoying Facebook app that won't uninstall and to be able to install custom apps or games etc that I normally wouldn't be able to. I would also like to finally be able to use my phone as a tethering device.
So, following the link you posted, Option D looks like my best choice. Would option D allow me to do all of what I said?
************ OPTION D *************
I997UCLB3-CWM-root-deodex.rar
Features in this version
- Entropy's Daily Driver kernel
- Red CWM recovery
- Rooted
- Deodexed
- Zipaligned
- Busybox
- Get extra mods HERE
Click to expand...
Click to collapse
Option C or D would be my choice but that's because I have a clue what I'm doing.
Honestly, if you plan on becoming the next "flashaholic", become familiar with heimdall and Odin as well because sometimes a flash can go wrong and leave you stuck at the boot screen, in which case you'll need either of the above to regain recovery options.
Sent from my SGH-I997 using xda app-developers app
8thos said:
Hi. I am a complete noob and have watched the tutorial vid, read and subscribed to the noob and samsung introduction threads. I joined this site with a specific goal. To get rid of this annoying Facebook app that won't uninstall and to be able to install custom apps or games etc that I normally wouldn't be able to. I would also like to finally be able to use my phone as a tethering device. So, following the link you posted, Option D looks like my best choice. Would option D allow me to do all of what I said?
************ OPTION D *************
I997UCLB3-CWM-root-deodex.rar
Features in this version
- Entropy's Daily Driver kernel
- Red CWM recovery
- Rooted
- Deodexed
- Zipaligned
- Busybox
- Get extra mods HERE
Click to expand...
Click to collapse
I agree with Pox, since you are in the beginning stages...here are some links for you and yes a lot of reading...and yes I have read them all...knowledge is power...and power will help you from f*up your phone...but hey your call, LOL, so take a read:
http://forum.xda-developers.com/showthread.php?t=1437548
http://forum.xda-developers.com/showthread.php?t=1700416
http://forum.xda-developers.com/showpost.php?p=25111013&postcount=1
http://forum.xda-developers.com/showthread.php?t=1514886
Check out the YouTube videos too they are also helpful.
Sent from my SGH-I997 using xda premium
I've been sitting on my stock Rogers Infuse 4G since I got it, hoping that they would at the very least release an update to ICS. I've pretty much given up all hope, especially now since the Infuse was listed as one of the "violators" in the recent lawsuit. So, in giving up there, I've started to try and get up to speed with what's available in terms of custom ROMs for the Infuse, etc...
I previously had a Captivate (seems like I pick the wrong phones) and have kept that one stock as well (now my wife's phone) aside from the official 2.3.3 update Samsung came out with for it. I checked in here once in a while to try and keep track of some of the updates as I thought about going for a custom rom, but I never had the balls to try anything (I've only ever flashed one phone in my life, and it was bought 2nd hand for $20 ) since I actually *must have* a working phone due to having a kid (daycare calls are kind of important!). However checking today, it seems like I am totally out of the loop and I just don't have the time to try and wade through thousands of pages on various threads to find out what the current "ways" are and such... but I know what I want to achieve so I'm hoping you folks are nice enough to at the very least give me a "search you noob" and point me to some threads :silly:
Since I'm totally stock, from what I'm gathering I think I need (and really I more of need a complete checklist of things to do rather than a "do it for me" kind of thing) to do is:
1) jot down my modem and apn settings and such (already done)
2) back up everything i need, pop out sd card (know how to do this)
3) wipe/clear to factory default (... and this)
4) back up the current rom - everything in case I want to return back to exactly the way the phone is stock
5) figure out what i need to do to flash CWM or something so I have the necessary recovery mode options?
6) flash to ICS (since from what I gather, I need to do that if I want to go to JB)?
7) follow instructions I found on the unnoficial CM10 JB thread to flash to JB
?) flash a new kernel? (is this done already during a rom flash; are there any new kernels?)
As commented, I can figure out 1-3 since I'm not stupid, but I have no idea what is even needed to do 4, nor do I know exactly all the tiny, necessary, steps to do the rest after that... especially since reading some things it seems like most of this is for AT&T users and since I'm on Rogers with a I997R (I assume the R means Rogers), I don't want to mess up my modem or other things to prevent the phone working for me... and these are the steps I'm hoping people can help me with.
So far, in prep, I've noted my phone info (basically everything in Phone settings) and I can back up all my apps and such that I care about, and I've downloaded the unofficial CM10 JB download and the Google apps apk as well, and on the same thread was a link to a 1-click ICS flash or something... so I got that too. Since I want to end up with JB, I'm not too concerned (or should I be?) with it being AT&T stuff to get to ICS, since it's the JB flash that I'd really want to ensure works for me.
Is anyone willing to help me out? I really wish I didn't have to be the "next loser" to make a thread like this but I just haven't had the time to be able to keep up with all the info going around (voodoo mods and whatever else?!) to be able to make sense of all this myself!
Thank you!
This looks like a good place for you to start
http://forum.xda-developers.com/showthread.php?t=1197248&highlight=how+to+root+rogers
First thing to do of course is read, read, read. Understanding what you are doing and why you are doing it is the most valuable resource you can have.
The gist of it is though: to install the custom updated roms, you need root. For Rogers infuse users that is very easy to do; all you have to do is install a rooted kernel in odin. After you do that you make a nandroid (and/or EFS) backup, and install whatever rom you want. CM9 and CM10 have their own kernel, so don't worry about that.
adfurgerson posted the step-by-step guide above me, although the links in the OP may be down. I have the mirrors here: http://minus.com/moAvVibed/
the 3 files in there are:
Odin_Infused_Gingerbread_Kernel_v1.zip - This is the rooted kernel you are flashing
Odin_Stock_Rogers_UXKG3_Kernel.zip - This is the stock rogers unrooted kernel if you want to unroot and go COMPLETELY stock for whatever reason (I doubt you will ever need to use this tbh)
Odin_UXKG3_rooted_no_bootloaders_v2.zip - The stock Rogers FIRMWARE. If you ever mess up you use this to "start from scratch". You will still be rooted though if you don't use the stock kernel above.
So yeah, just flash the kernel in odin as described in the above thread and you will have root + cwm.
From there you reboot into cwm (turn off, turn on holding vol+ and vol- buttons) and make a nandroid backup of your stock rogers rom (or an EFS backup with the infuse toolkit: click here), flash CM9 as per the instructions in the OP, and finally CM10 as per the instructions in the OP.
Also remember:
1. The infuse is almost impossible to hard brick. The only real way to do so is to improperly flash bootloaders, which a rogers infuse user will never have to do. Only AT&T users coming from Froyo have to do it. So keep that in mind.
2. On the chance that you get soft-bricked (screen won't go past samsung logo for example) you can always go back to flashing the stock rom/rooted kernel again in odin and start all over again.
The only thing that I can add to Threi's excellent reply is to mention the one click to ICS. It is in the first post of Scott's CM10 thread,it should give you the ICS recovery that is needed to flash JB without flashing a full ICS ROM.
I suppose I should have mentioned that I also have rooted my phone already (used SuperOneClick, worked fine). Is there any reason why I would use that "rooted kernel" versus just having root on my phone (ie, having su installed... dunno what else it did, I don't think it did anything to my kernel)?
I guess my biggest unknown is all the backup processes that can be done and how to do them? Is "nandroid" a one stop shop for doing backups of everything? Although there's the complete stock Rogers rom linked above (which I'll nab anyways!), I was thinking I would try to make a complete copy of my own phone (just in case)... I guess next step is to search for "nanroid"
Are there any other backup tools I could use/check out (not apk backup tools... those are easily located in the app store, or performed with adb myself).
j.smith said:
I suppose I should have mentioned that I also have rooted my phone already (used SuperOneClick, worked fine). Is there any reason why I would use that "rooted kernel" versus just having root on my phone (ie, having su installed... dunno what else it did, I don't think it did anything to my kernel)?
I guess my biggest unknown is all the backup processes that can be done and how to do them? Is "nandroid" a one stop shop for doing backups of everything? Although there's the complete stock Rogers rom linked above (which I'll nab anyways!), I was thinking I would try to make a complete copy of my own phone (just in case)... I guess next step is to search for "nanroid"
Are there any other backup tools I could use/check out (not apk backup tools... those are easily located in the app store, or performed with adb myself).
Click to expand...
Click to collapse
Flashing a kernel is how you obtain cwm which allows you to flash custom ROMs(cwm is clockwork mod recovery). A nandroid is a backup you create in cwm that is copy of your phone that will return your phone to the exact state it was at the time backup was made.
adfurgerson said:
Flashing a kernel is how you obtain cwm which allows you to flash custom ROMs(cwm is clockwork mod recovery). A nandroid is a backup you create in cwm that is copy of your phone that will return your phone to the exact state it was at the time backup was made.
Click to expand...
Click to collapse
Aha, perfect description. I didn't realize I had to get a new kernel to have CWM... and I'm guessing because of signing and such, that a custom kernel (with CWM) is required in order to flash a non-signed rom, which is why you couldn't just do it on stock, right?
Ok, so now armed with that info that clears up a lot, I guess I have just one question left (which I can probably find the answer to with some searching). I have read what that voodoo lagfix is and is this something that is standard now on all kernels (because if it can cause issues, I'd rather just have a kernel without it)? Are there any "rooted" kernels without the lagfix built in so I don't have to remember about disabling the lagfix? ...or is there a way to install CWM on to my current kernel?
*edit* Ok, I realize I might be a bit too picky about the voodoo lagfix thing. I found two good threads on dealing with Rogers specifically, so I'll read over those (and suck it up about voodoo) and see how it goes. Since my vacation got unfortunately cancelled due to a sick kid, I have some time to experiment this weekend... hopefully ending up with JB on my phone!
Glad to see your on you're on the way to JB. After you install a custom kernel be sure to make a nandroid in the backup and restore option of CWM before you flash a ROM. That is like your safety net, if you wiped everything and had a bad download that wouldn't install, you will have a nandroid to restore.
adfurgerson said:
Glad to see your on you're on the way to JB. After you install a custom kernel be sure to make a nandroid in the backup and restore option of CWM before you flash a ROM. That is like your safety net, if you wiped everything and had a bad download that wouldn't install, you will have a nandroid to restore.
Click to expand...
Click to collapse
Yep, just flashed the rooted cwm kernel and performed a backup. I read somewhere that you can/should back up your efs in case you lose your imei... so I'm just going to quickly look in to that, then i wipe and do some flashes to jb... shouldn't take long hopefully!
Ok, I seem to be stuck at trying to get the one-click ICS install to work. I've got the EZUpdater package to ensure I have the right drivers, yet everything I try with the one-click seems to tell me that the drivers aren't installed and then launches an installer which also doesn't seem to detect the phone... yet EZUpdater will run fine, etc...
I'm just about to reboot and launch device driver in a mode to list all hidden/previously installed devices and nuke them from history to hopefully purge my system of all traces of any drivers and install EZUpdater one more time to get the drivers installed.
Any reason why my phone wouldn't show up in this one-click (it uses heimdall or whatever) program, but seems to work in most everything else (adb even runs fine)?
*edit*
Got it all working! I couldn't get the one-click ICS to work for the life of me... it just didn't see the drivers even though they were there and working. I guessed maybe it had to do with me running Windows 7 x64 and having x64 drivers, but the one-click maybe being 32bit. I even tried installing the x64 Java JRE but didn't seem to make any difference.
I ended up having to flash CM9 which worked fine, then going to CM10. Had no issues doing that... wish I had just tried that before since that one-click wasted hours of my day and got me somewhat frustrated!