Database Info

unbrick samsung galaxy s vibrant.

i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?

cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.

I have seemed to have done the something similar as I was trying to reflash with ODIN and the phone went black, I left it alone for several minutes and now when I try to turn the phone on I just have a graphic with a phone and a computer with a little triangle with an exclaimation mark in the middle and nothing else happens.

djallen1 said:
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.
Click to expand...
Click to collapse
I really think i have the done impossible, there is no download mode nor recovery mode, (well, this has never worked) i don't know what to do, i'm getting my phone replaced.
I tried using adb on my computer, but the device is not found, my computer doesn't recognize my device.

cervantesjc said:
I really think i have the done impossible, there is no download mode nor recovery mode, (well, this has never worked) i don't know what to do, i'm getting my phone replaced.
I tried using adb on my computer, but the device is not found, my computer doesn't recognize my device.
Click to expand...
Click to collapse
UGH
I have the SAME problem...but I always had download AND recovery working...
after a few flashes in a short span...they just dissapeared...
screen just turns black after the "S" logo animation....
ADB can't see the device either

Same Here Too :-|
i've been searching and trying to get into dowload mode for a week and i't not working. i can hear it boot up but just stuck on the darn Vibrant screen

philthyman21 said:
i've been searching and trying to get into dowload mode for a week and i't not working. i can hear it boot up but just stuck on the darn Vibrant screen
Click to expand...
Click to collapse
I was there, use Odin to reflash to stock.

huh
djallen1 said:
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.
Click to expand...
Click to collapse
i beg to differ
nothing is working for me either

So I went to This Site pathikshah. com /blog / install-android-2-2-froyo-galaxy-s/ (sorry about the spaces new user and xda wont let me post links, not spamming honest), I did exactly as it said it was working as planned until it reset after install. First instead of the vibrant screen coming up it now says:
Galaxy S
GT-I9000
Then It goes to:
Android System Recovery <3e>
on that screen it says twards the bottom:
update media please wait
E:Cant mount /dev/block/mmcblk0p1
(Invalid argument)
E:copy_dbdata_media:Cant mount SDCARD:
your storage not prepared yet, please use UI me
nu for format and reboot actions.
copy default media content failed.
so when I try to scroll through the recovery menu I have to push vol Up to scroll down
also it does nothing when i press the ok button (power button), unless I hold it down then it resets and goes back to the same recovery screen

I rooted the samsung galaxy s then added a rom and the rom is crashing my phone I've tried aboslutely everything don't know what else to do.

i also have a problem
i have install ROM manager and make a back up
went i try to recovery my backup it give me first the original recovery mode i know i have to select update.zip to access the clockworkmod recovery (ver 2.5.1.2 last one) i use the option restore and start it
now my phone just reboot in recovery mode
i'm looking if some one have a working ROM backup
tnx for your help
Drago.

cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Read instructions and download files from thread here:
http://forum.xda-developers.com/showthread.php?t=734475
Watch this video:
http://www.youtube.com/watch?v=AnY7P14JSWQ
Good luck

fstathes said:
Read instructions and download files from thread here:
http://forum.xda-developers.com/showthread.php?t=734475
Watch this video:
http://www.youtube.com/watch?v=AnY7P14JSWQ
Good luck
Click to expand...
Click to collapse
Thank you for the video link. I was up to that point unable to get the download/shoveling droid screen. Now I'm in the process of finally getting the phone back to stock after downloading the t-mobile update that cam through and bricked the phone.

no downloading mode
Hi i was hoping this will help me to reenabeling my bricked samsung. But i cant get it in to downloanding mode. the 3 button way isnt working and the way showed in the movie neither. Is there an other way to get the phone back to work?

I have tried all the methods posted here as well as many others from the link posted above. But to no avail.
I did everything successfully up until the reboot. Whereupon, it would not start. No amount of button combination helped me. And taking out the battery pack is no help either. It just won't start. I could use any advice.
Thank you.

I'm in the same boat now, attempted to odin back to stock and now I have a brick. It's just blank, I cant get it into download or recovery mode using any method described.
Is my only shot the jig method I've read about now?
EDIT
Nevermind, I got it. Pulled the battery, replaced it, held down both power buttons, inserted usb (already plugged in comp w/ odin open), boom..entered download mode and flashed..

cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Remove the battery and insert it again, now keep pressing the volume buttons and connect the USB cable to your phone, the usb cable must be connected to your pc first.

hey, i also experienced bricking my phone. is there a step by step process how to unbrick it? i need urgent help please. by the way im using samsung galaxy s 4g (

after i have gone to download mode. my computer cannot recognize my device. help me please.

to the post above me. Sounds like you have a bad usb data cable. Grab you a new cable online and you should be good to go
I'm assuming you have already downloaded the drivers to your computer. Sasmung.com will have them

Download mode gone.

So, I got soft bricked. I tried to odin back to stock but ive tried every three button combo to get back in to download mode with nothing working. I try pulling battery then holding both vol keys then inserting battery and then plugging in usb cable while its plugged into the computer and odin is running. Ive tried every other variation of this as well. I have no idea what to do next, please help. Plugging in the USB after holding the keys only brings up the SAMSUNG screen. I can three button into 3e recovery but of course that is no help. Please help

yabbb said:
So, I got soft bricked. I tried to odin back to stock but ive tried every three button combo to get back in to download mode with nothing working. I try pulling battery then holding both vol keys then inserting battery and then plugging in usb cable while its plugged into the computer and odin is running. Ive tried every other variation of this as well. I have no idea what to do next, please help. Plugging in the USB after holding the keys only brings up the SAMSUNG screen. I can three button into 3e recovery but of course that is no help. Please help
Click to expand...
Click to collapse
Follow my first signature link. Read it all...a few times.

Try volume down, put battery in, plug USB cable that is already in PC into phone.
Sent from my SAMSUNG-SGH-I997 using xda premium

Yeah, I tried that as well. I read that thread and didn't learn anything new. I've been through soft bricks before, many times but never have I lost download mode.
Sent from my Desire HD using XDA App

If your getting recovery then download mode is not gone..... put your phone inrecovery mode, if you know how to use adb, or even have it, open command prompt and type: adb devices to see if it recognizes your phone. Should say xxxxx in recovery mode or something. Then type: adb reboot download. This will probably be the only way you will get to download as it sounds like your buttons remapping got screwed up somehow...
Sent from my SGH-I997 using xda premium

Tried it, adb detected nothing. I don't have cwm, I have unmodded 3e. Adb didn't detect any device and I never had USB debugging enabled. I bought a jig off eBay as my last hope, any luck with these?
Sent from my Desire HD using XDA App

Probably not... idk what to tell you now
Sent from my SAMSUNG-SGH-I997 using xda premium

Awesome...
Thanks anyways.
Sent from my Desire HD using XDA App

yabbb said:
Awesome...
Thanks anyways.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Have you tried a different PC?
Sent from my SAMSUNG-SGH-I997 using XDA App

[Q] Can't get into S/W!

Two weeks ago I had an ICS rom installed and was tired of the poor battery life, so I tried to unroot my phone and bring it back to stock to start over later. I got the stock 2.3.3 installed and decided not to unroot and just use the rom.
I followed this guide: http://forum.xda-developers.com/showthread.php?p=14159600#post14159600
But I didn't actually use SOC to unroot, because I wasn't sending my phone back to TMobile.
Today I was looking to see if there were any ICS roms that I might like to try out and found HFS. I downloaded it and tried to boot into CWM (Power + Vol down), and instead of going into CWM, it did the little android install splash screen, and just wiped my phone. So I installed RomManager and tried to install the rom through that. It rebooted, and did the same thing. So I "fake flashed" CWM through RomManager, and it booted into CWM finally. I thought I was in the clear, so I factory reset, wiped everything, and installed the HFS rom. It ran all the way trhough and installed successfully, until I rebooted. Now it's stuck on the white LG logo. I can't boot into CWM! It just goes to the android update splash and restarts.
To make things so much worse, I can't even boot into S/W update! I remove the battery and hold both volume buttons and plug in the USB. It does nothing. No lights, no driver installation prompt on my computer. Nothing...
What can I do at this point?

You need to re-install CWM, when you went back to stock it probably reverted your recovery to stock as well

Alright, I can get into s/w update by holding only the down arrow... But now I can't get NVFlash to acknowledge that my phone is plugged in. I've installed the LG drivers, ADB drivers and the LG Modem drivers. It doesn't ask for the APX drivers, although I've installed them in the past...
What do?

Just making sure, you are removing the battery, holding down the VOL up/down while you are plugging it in W/O the battery?

Yes I am. But it doesn't work if I push both, then plug it in. I only push the bottom and it boots into S/W

FYI, never, and I mean, NEVER use ROM Manager to flash CWM Recovery. That's like asking for a brick.
Sent from someone's Galaxy Nexus running AOKP + Franco

idbl_fanatic said:
Just making sure, you are removing the battery, holding down the VOL up/down while you are plugging it in W/O the battery?
Click to expand...
Click to collapse
DaBigums said:
Yes I am. But it doesn't work if I push both, then plug it in. I only push the bottom and it boots into S/W
Click to expand...
Click to collapse
Re-read his question. In order to get into apx mode you must remove the battery, keep it out, and, while holding the volume up AND down buttons, plug in the phone. If you already have the drivers installed itbwill not prompt for them. Just. Flash cwm with nvflash.
Sent from my LG-P999 using xda premium

Волк said:
Re-read his question. In order to get into apx mode you must remove the battery, keep it out, and, while holding the volume up AND down buttons, plug in the phone. If you already have the drivers installed itbwill not prompt for them. Just. Flash cwm with nvflash.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
My apologies for any misunderstanding as my answer was really short. But what I meant to say was, when I remove the battery and push both volume buttons down, then plug it in, I wait for 3 minutes and it still does nothing. But if I remove the battery, hold only the volume down button, it will boot into S/W. But when I use this method, it doesn't show up in the device manager as anything. I only get the sound of connecting a USB device, other than that, it's just not recognized by my PC. I've tried to run NVFlash anyway, and it says USB not connected. I'm at a complete loss...

Well I actually had a problem like this ( the not found usb part ) ehen I "bricked" my phone and what I did was I kept trying this for about 5 minutes and it worked. So my advice ie to check if you have the USB driver installed then keep trying to NVFlash.
If I helped you, push the thanks button for goodness sakes!

[FIXED!] Can not get into download mode

Here is what happened. I was on CM7 with blue cwm, flashed paranoid android successfully, phone works, calls/mms work, everything works but i get rainbow cwm. In order to fix this i followed the directions here http://forum.xda-developers.com/showthread.php?t=1705260, was on step 3 when i installed kies i had the phone connected to the computer via usb. After kies installed i received an error in windows saying the usb device could not be recognized. Since then no matter what i try i can not get the phone into download mode.
Things i have tried:
1- pulling battery, reinserting, holding +- volume while attaching usb cable
2- different usb cable
3- different computers
4- turning on and off debug mode
5- mounting usb via cwm (pretty sure thats what i selected, hard to see with cwm so messed up)
6- uninstalling and re-installing kies+drivers
Any ideas?
***UPDATE: Fixed... installed 2.3.6 rom with red cwm, then installed PA through red cwm. Download mode now works and rainbow cwm fixed, doesn't make 100% sense but it is fixed...

Outstanding pls change title to SOLVED.
mbliss said:
Here is what happened. I was on CM7 with blue cwm, flashed paranoid android successfully, phone works, calls/mms work, everything works but i get rainbow cwm. In order to fix this i followed the directions here http://forum.xda-developers.com/showthread.php?t=1705260, was on step 3 when i installed kies i had the phone connected to the computer via usb. After kies installed i received an error in windows saying the usb device could not be recognized. Since then no matter what i try i can not get the phone into download mode.
Things i have tried:
1- pulling battery, reinserting, holding +- volume while attaching usb cable
2- different usb cable
3- different computers
4- turning on and off debug mode
5- mounting usb via cwm (pretty sure thats what i selected, hard to see with cwm so messed up)
6- uninstalling and re-installing kies+drivers
Any ideas?
***UPDATE: Fixed... installed 2.3.6 rom with red cwm, then installed PA through red cwm. Download mode now works and rainbow cwm fixed, doesn't make 100% sense but it is fixed...
Click to expand...
Click to collapse

Ok so I jumped the gun early last night in assuming it was fixed. As my update states on red cwm and no rainbows, I can get into download mode through cwm (advanced menu). That's as far as I got last night before I went to bed, this morning I went to re-install PA since the phone was stuck at samsung logo (like PA thread says in installation procedures) and i got an installation error. Went into download mode to put today's update on it and found out the PC was unable to recognize the phone. I tried un-installing kies and just installing the infuse drivers, when i connect the phone i get an error saying the device is not recognizable. Tried un-installing the drivers and reinstalling kies+drivers and get the same device is not recognizable error. I also tried different usb cords and on a laptop and get the same device not recognizable on both computers.
Really at a loss now on what to do since the same error is happening on two different computers, something must be wrong with the phone or cwm? Unable to follow un-brick guides since odin won't recognize the phone... Any ideas?

mbliss said:
Ok so I jumped the gun early last night in assuming it was fixed. As my update states on red cwm and no rainbows, I can get into download mode through cwm (advanced menu). That's as far as I got last night before I went to bed, this morning I went to re-install PA since the phone was stuck at samsung logo (like PA thread says in installation procedures) and i got an installation error. Went into download mode to put today's update on it and found out the PC was unable to recognize the phone. I tried un-installing kies and just installing the infuse drivers, when i connect the phone i get an error saying the device is not recognizable. Tried un-installing the drivers and reinstalling kies+drivers and get the same device is not recognizable error. I also tried different usb cords and on a laptop and get the same device not recognizable on both computers.
Really at a loss now on what to do since the same error is happening on two different computers, something must be wrong with the phone or cwm? Unable to follow un-brick guides since odin won't recognize the phone... Any ideas?
Click to expand...
Click to collapse
Since you can get into CWM, there is still so much hope for you, it'll just require trying a bunch more stuff but you will figure out out.
IDEAS:
Did you try installing PA again via CWM? If you are still on red CWM, that means you're not on an ICS kernel yet. You want blue CWM. Maybe try installing the PA zip a couple more times after doing a wipe.
If you're still on red CWM, you might be able to still install a GB rom that might be on your SD card to at least get you out of the mess for now.
For Odin/Heimdell, did you try other other USB ports, besides the 1 on each computer? Can you still get into download mode via the battery pull + volume buttons? The USB cord can be plugged into the computer before you put the battery back. I would trust that before the CWM download mode. Do you get the construction sign triangle that says "do not remove target"? That's what you want for Odin or Heimdell.

MattSoRaven said:
Since you can get into CWM, there is still so much hope for you, it'll just require trying a bunch more stuff but you will figure out out.
IDEAS:
Did you try installing PA again via CWM? If you are still on red CWM, that means you're not on an ICS kernel yet. You want blue CWM. Maybe try installing the PA zip a couple more times after doing a wipe.
If you're still on red CWM, you might be able to still install a GB rom that might be on your SD card to at least get you out of the mess for now.
For Odin/Heimdell, did you try other other USB ports, besides the 1 on each computer? Can you still get into download mode via the battery pull + volume buttons? The USB cord can be plugged into the computer before you put the battery back. I would trust that before the CWM download mode. Do you get the construction sign triangle that says "do not remove target"? That's what you want for Odin or Heimdell.
Click to expand...
Click to collapse
First off thanks for the help!
I was on blue cwm before I installed PA, it gave me the raindbow cwm so i figured i had froyo bootloaders still, which is what started this whole mess.
I am still on red cwm but I can not install roms off my external zip since the phone isn't seeing it, even when i try to unmount/mount it through cwm. The only rom i have is PA which is on internal sd that my phone does see. Unfortunately every time I try to install that rom now it says "successfully installed" then has an error that starts with assert failed: getprop("ro.product.device") == "aries".
Regarding the other USB ports I have tried multiple ports on multiple computers (3 now), my newer one doesn't have usb 1.0 so I know for a fact I was using a 2.0 port, I have tried ports directly connected to the mobo and ports in the front of the case.
And here is the kicker that's really messing me up and what makes me hit a brick wall with every single post I read about this problem. I do get the yellow construction sign that says 'do not remove target', when i plug my phone into the computer with that sign on the screen the computer immediately says 'USB Device Not Recognized', then 'Device driver software was not successfully installed'. What kills me is I get this error on all 3 machines I have tried so far, with different usb cables. Since im getting this error I can not do odin or heimdall.

Sounds super frustrating. I haven't been stuck like that in a while..
Maybe remove the "solved" from your post and others might have ideas too.
I don't know about your cwm, but on mine i can access my external sd through the option called "install zip from INTERNAL sd card." That is different than the usual "install from zip" option. It's a few options down from the regular "install from zip". It is totally backwards, but let's me install from my external sd.

You are obviously having driver issues...so here is this best thing to do...do not use Odin, just try heimdal http://forum.xda-developers.com/showthread.php?t=1524081
Heimdal does not require drivers from kies or Samsung....in fact it uses its own custom drivers
Run heimdal
Connect phone in download mode
Press flash
It may say it needs to install drivers, just do as it says and follow the onscreen instructions to install the custom drivers
Continue with the flash
***when it finishes do not close the heimdal...leave it open***
Put phone back in download mode and flash again,except this time check the box for flash bootloaders-that will fix rainbows
Download mode:
Pull battery
Put battery back in
Hold volume up+down simutaniously *don't touch that power button*
While holding both volume buttons plug USB into both phone and computer
***also make sure you have java installed or else heimdall might not work***
Sent from my HTC PH39100 using xda app-developers app

mg2195 said:
You are obviously having driver issues...so here is this best thing to do...do not use Odin, just try heimdal http://forum.xda-developers.com/showthread.php?t=1524081
Heimdal does not require drivers from kies or Samsung....in fact it uses its own custom drivers
Run heimdal
Connect phone in download mode
Press flash
It may say it needs to install drivers, just do as it says and follow the onscreen instructions to install the custom drivers
Continue with the flash
***when it finishes do not close the heimdal...leave it open***
Put phone back in download mode and flash again,except this time check the box for flash bootloaders-that will fix rainbows
Download mode:
Pull battery
Put battery back in
Hold volume up+down simutaniously *don't touch that power button*
While holding both volume buttons plug USB into both phone and computer
***also make sure you have java installed or else heimdall might not work***
Sent from my HTC PH39100 using xda app-developers app
Click to expand...
Click to collapse
Just followed your instructions step by step. When the phone boots up in download mode i get a msg on the taskbar saying "usb device not recognized" and heimdall never changes from 'device status: disconnected", the big flash button is grayed out. I tried on two different desktops, tried different usb ports including 2.0 and 3.0, tried two different samsung branded cables. Frustrating

Are you entering dl mode through cwm or manually? I've never had luck going through cwm...although I think you stated earlier you couldn't enter dl mode the manual way
Sent from my HTC PH39100 using xda app-developers app

mg2195 said:
Are you entering dl mode through cwm or manually? I've never had luck going through cwm...although I think you stated earlier you couldn't enter dl mode the manual way
Sent from my HTC PH39100 using xda app-developers app
Click to expand...
Click to collapse
Tried both, although I am not 100% sure im in correct download mode manual way. When i enter download mode through red cwm i get the yellow construction sign but the pc never recognizes the phone it seems. Going the manual route the phone gets stuck on the samsung logo with the 4 buttons lit up on the bottom and the pc says "usb device not recognized". So it seems the PC is seeing something the manual route but the yellow construction sign never pops up.

mbliss said:
Tried both, although I am not 100% sure im in correct download mode manual way. When i enter download mode through red cwm i get the yellow construction sign but the pc never recognizes the phone it seems. Going the manual route the phone gets stuck on the samsung logo with the 4 buttons lit up on the bottom and the pc says "usb device not recognized". So it seems the PC is seeing something the manual route but the yellow construction sign never pops up.
Click to expand...
Click to collapse
The Samsung logo should not pop up at all so your either doing something wrong the manual way or your infuse doesn't wanna go the manual way
It may be that your power button is borked...been seeing that a little lately...
When entering download mode it should go straight to the yellow triangle thing or to the option to enter download mode or reboot phone...again when entering download mode you should never see the Samsung logo first
Sent from my HTC PH39100 using xda app-developers app

mg2195 said:
The Samsung logo should not pop up at all so your either doing something wrong the manual way or your infuse doesn't wanna go the manual way
It may be that your power button is borked...been seeing that a little lately...
When entering download mode it should go straight to the yellow triangle thing or to the option to enter download mode or reboot phone...again when entering download mode you should never see the Samsung logo first
Sent from my HTC PH39100 using xda app-developers app
Click to expand...
Click to collapse
OK well that makes sense, the phone refuses to go into download mode the manual way. I am 100% positive I am not touching the power button during the process.
I am unplugging from usb and removing battery
Holding both volume buttons
re-inserting battery with volume buttons held
re-inserting usb cable with volume buttons held
it goes straight to samsung logo every time

mbliss said:
OK well that makes sense, the phone refuses to go into download mode the manual way. I am 100% positive I am not touching the power button during the process.
I am unplugging from usb and removing battery
Holding both volume buttons
re-inserting battery with volume buttons held
re-inserting usb cable with volume buttons held
it goes straight to samsung logo every time
Click to expand...
Click to collapse
if you put battery in without usb will it bootup to samsung logo by it self? if that happens then it supports the possibility that your power button is borked
also may wanna try this method to get into download mode as ive heard of it working for others
pull battery
hold volume keys
plug usb in
place battery back in
and as a last resort there's always usb jigs which i think you can buy for like 5 or 10 bucks on ebay

mg2195 said:
if you put battery in without usb will it bootup to samsung logo by it self? if that happens then it supports the possibility that your power button is borked
also may wanna try this method to get into download mode as ive heard of it working for others
pull battery
hold volume keys
plug usb in
place battery back in
and as a last resort there's always usb jigs which i think you can buy for like 5 or 10 bucks on ebay
Click to expand...
Click to collapse
Ok progress is made! Not sure why it worked this time but I was able to get into download mode manually! The phone immediately went to the yellow construction sign. I cleaned out the area around the power button with an air compressor (not a can), was probably just real dirty from pocket scum. Heimdall still says disconnected

Ok semi-success!
Heimdall recognizes the phone now!
When i go to flash it pops up a window with some instructions for zadig.exe (wants me to select samsung usb in next window), however when i select options -> list all devices it doesnt show samsung usb in the drop down menu. Just 'Gadget Serial' 'Gadget Serial (Interface 0)' and my IR receiver (its a htpc that finally recognized the phone).
Not sure what to do now...

Fixed!
Just used odin and http://forum.xda-developers.com/showthread.php?p=27286083#post27286083 !
Sweet now back to stock and can work on getting back to yummy ICS from here... what a learning experience! Seems it all came down to a dirty power button...
Thanks for the help everyone!

Awesome! Glad you figured it out somehow. You might want to download zen arcade's infuse toolkit or some roms and throw them on your phone just in case something crazy happens during a flash again.

Can not get into download mode or switch on... Please help!
I have Samsung Infuse 4G and I was on Froyo and tried to root my phone with Odin3 v1.7 (I997UCLB3-CWM-root-deodex-extras.tar); however, messed up something now I am not able to switch on the phone or get into download mode or any boot loop screen ... nothing at all... on black screen which shows image of mobile and PC and one yellow triangle between them with "!" sign...
Someone please help me... if there is any way to fix this... or my phone is dead for ever...

Use Odin on that screen, same as download screen
Sent from my SGH-I997 using xda app-developers app

CWM corrupt, infuse bricked

The CWM file in my Infuse 4g is corrupt. When holding down volume up + volume down and pressing power button; CWM restore comes up but is garbled. I can not use it. Is there anyway to solve this? The phone is bricked.

That is due to missing GB bootloaders. Search around and you will find how to flash them on download mode.
Use qkster's uclb3 heimdall one-click twice, the second time with the bootloaders checkbox ticked on.

I've been at it all day with no luck.
Went to the page suggested and could not get it to work.
Went to several more with the same luck.
Heimdall can't detect it. Odin can't detect it.
However, adb devices finds it.
adb reboot works but gets the same garbled up screen again and again.
Downloaded 3e_recovery_no_sig_check.zip
Installed it by adb push ... adb reboot recovery gives me the same garbled up cwm recovery window.
Reinstalled it several times... same thing.
I really need some help.
I have no phone... landline or other wise.
What happened was;
Rooted the phone.
Use modmanager to install cwm and install a rom.
All seemed to go well. The instructions said the new rom would boot up twice then to add the gapps zip.
It just kept booting up over and over for over an hour. (looping)
When I did the 'vol up + vol down and press power button to go into recovery mode, I got the garbled up recovery screen.
That where the phone is right now. Nothing but a brick.
Any help greatly appreciated.
dlw2

dlw1146 said:
I've been at it all day with no luck.
Went to the page suggested and could not get it to work.
Went to several more with the same luck.
Heimdall can't detect it. Odin can't detect it.
However, adb devices finds it.
adb reboot works but gets the same garbled up screen again and again.
Downloaded 3e_recovery_no_sig_check.zip
Installed it by adb push ... adb reboot recovery gives me the same garbled up cwm recovery window.
Reinstalled it several times... same thing.
I really need some help.
I have no phone... landline or other wise.
What happened was;
Rooted the phone.
Use modmanager to install cwm and install a rom.
All seemed to go well. The instructions said the new rom would boot up twice then to add the gapps zip.
It just kept booting up over and over for over an hour. (looping)
When I did the 'vol up + vol down and press power button to go into recovery mode, I got the garbled up recovery screen.
That where the phone is right now. Nothing but a brick.
Any help greatly appreciated.
dlw2
Click to expand...
Click to collapse
Do what andros11 said above
Sent from my SGH-I997 using xda premium

dlw1146 said:
I've been at it all day with no luck.
Went to the page suggested and could not get it to work.
Went to several more with the same luck.
Heimdall can't detect it. Odin can't detect it.
However, adb devices finds it.
adb reboot works but gets the same garbled up screen again and again.
Downloaded 3e_recovery_no_sig_check.zip
Installed it by adb push ... adb reboot recovery gives me the same garbled up cwm recovery window.
Reinstalled it several times... same thing.
I really need some help.
I have no phone... landline or other wise.
What happened was;
Rooted the phone.
Use modmanager to install cwm and install a rom.
All seemed to go well. The instructions said the new rom would boot up twice then to add the gapps zip.
It just kept booting up over and over for over an hour. (looping)
When I did the 'vol up + vol down and press power button to go into recovery mode, I got the garbled up recovery screen.
That where the phone is right now. Nothing but a brick.
Any help greatly appreciated.
dlw2
Click to expand...
Click to collapse
You said you used "modmanager"... did you mean ROM manager? ROM manager doesn't play well with most of these ROMs. Could be part of the problem. Get rid if it and do what andros11 said.
Sent from my SGH-I997 using xda premium

she Mbrumbe
It's working! Thank you all.
dlw

What did you do to fix it?
Sent from my SGH-I997 using xda premium

Did as andros11 suggested.
Use qkster's uclb3 heimdall one-click twice, the second time with the bootloaders checkbox ticked on.
All went well.
Also, can I root with this update?
dlw

Follow instructions in the 2nd post in the following:
http://forum.xda-developers.com/showthread.php?p=23118144
Sent from my SGH-I997 using xda premium

Having trouble getting into 'download mode' after flashing.
With data cable connected to PC and phone.
vol down + vol up + power = e3 recovery
vol down + power = normal boot
vol up + power = normal boot
Without data cable connected to phone same as above.
How do I get back into 'downoad mode'?
dlw

dlw1146 said:
Having trouble getting into 'download mode' after flashing.
With data cable connected to PC and phone.
vol down + vol up + power = e3 recovery
vol down + power = normal boot
vol up + power = normal boot
Without data cable connected to phone same as above.
How do I get back into 'downoad mode'?
dlw
Click to expand...
Click to collapse
Pull battery
Put battery back in
Hold volume +/- at the same time
Connect phone to pc while holding volume
Sent from my HTC PH39100 using Tapatalk 2

Thanks a million.
dlw

Deleted.
Sent from my SGH-I997 using xda premium

If you know how to solder make a jig, They'll save you lots of time if you have trouble getting in to Download mode.
http://galaxys2root.com/galaxy-s2-hacks/how-to-make-a-usb-jig-for-your-galaxy-s2/
Or you can buy them cheaply on flee-bay