So simple question, does anyone know (have tasted) if Touchpad supports OTG like for example Galaxy S2?
I bought these from DX: http://www.dealextreme.com/p/micro-usb-on-the-go-host-otg-adapter-pair-50774 and is working great with my Galaxy S2, but can it be used for Touchpad?
First, it is TESTED.
Second, Nope no native support yet, might have to wait till android port is complete, might take a couple of months.
[Q] USB OTG?
That's pretty cool, keep up the work.
Does anyone have ubuntu chrooted to check if the usb module is reporting anything?
kinda pre emptively ordered one in hope.
http://www.ebay.co.uk/itm/New-Micro-USB-Male-USB-Female-Data-Cable-Adapter-/280715545728?
Apparemtly there is built-in OTG USB support using a powered hub or Y cable, and an OTG mini-male to regular female USB adapter, according to rootzwiki.com/showthread.php?4332-Functional-USB-Host-on-Touchpad
Bill2 said:
Apparemtly there is built-in OTG USB support using a powered hub or Y cable, and an OTG mini-male to regular female USB adapter, according to rootzwiki.com/showthread.php?4332-Functional-USB-Host-on-Touchpad
Click to expand...
Click to collapse
One of those newbs who can't post links eh? I'll fix that...
http://rootzwiki.com/showthread.php?4332-Functional-USB-Host-on-Touchpad
The Touchpad doesn't have a powered port is the only problem - so provide power to whatever device and you're good to go.
what about a external HDD with its own powe supply, will it work..
unfortunately, i'm still waiting for my TP so cant test
Does it work with your HD2?
If so, there is no reason not to work with TP
(Hint: HD2 has same kind of usb host capabilities that needs external power supply)
So was it ever established whether or not USB OTG works on the Touchpad? Sorry to necro-post, but I picked up a touchpad during the firesale, have been loving it with first WebOS then CM9, and since I ordered a USB OTG adapter for my GSIII (this friday!) I was curious if there was anything I needed to know about using OTG with the HPTP.
It just works with a powered adapter. Nothing more to it then that. I've plugged almost everything into mine!
Sent from my SAMSUNG-SGH-T989 using xda premium
This thread has pictures links etc of the cable setup I'm using on cm9 with the TOUCHPAD
http://forum.xda-developers.com/showthread.php?t=1934380
[Tips and Tricks] OTG (USB Host Support) - Requires kernel support
Here's a cool mod at sdx that I plan to do for TP powered OTG courtesy of ften ...
http://forum.sdx-developers.com/index.php?topic=19916.0
Self Powered USB Host on the HP Touchpad!
Sent from my "Up all night, sleep all day" HP CM9 Touchpad
Thanks for the links, will see if I can get the needed cables etc from eBay/Amazon
Thanks for the help. My OTG cable and other things from Monoprice should've come yesterday, so hopefully I'll have them tomorrow. By powered adapter, do you mean something like a powered USB hub? Although I didn't get that OTG cable for the touchpad, it'd be a nice treat to be able to use it with that, it would definitely make moving movies around a lot easier.
EDIT (10/19): Dangit, they didn't come today. I'll have to see what's up, because they've been in my area for a while according to tracking just not coming.
Yes, u will have to use either a powered USB hub or get power from a USB charger that doesn't have the data +/- pins shorted internally (purchased or modified). If u plug device (ie phone) into charger and it says "ac charging" that means the data pins are shorted.
Sent from my "Up all night, Sleep all day" EVO3D!
mpgrimm2 said:
This thread has pictures links etc of the cable setup I'm using on cm9 with the TOUCHPAD
http://forum.xda-developers.com/showthread.php?t=1934380
[Tips and Tricks] OTG (USB Host Support) - Requires kernel support
Here's a cool mod at sdx that I plan to do for TP powered OTG courtesy of ften ...
http://forum.sdx-developers.com/index.php?topic=19916.0
Self Powered USB Host on the HP Touchpad!
Sent from my "Up all night, sleep all day" HP CM9 Touchpad
Click to expand...
Click to collapse
hi:
thread speaks of wiring directly the 5v stepup to the existing microusb port w/ diode..this would be great to see.
i am notsmart but w/ detailed instructions AND pics and supplies links, i would consider trying it.
mpgrimm2 said:
Yes, u will have to use either a powered USB hub or get power from a USB charger that doesn't have the data +/- pins shorted internally (purchased or modified). If u plug device (ie phone) into charger and it says "ac charging" that means the data pins are shorted.
Sent from my "Up all night, Sleep all day" EVO3D!
Click to expand...
Click to collapse
Alright, thanks. I think I need to get a powered hub for my laptop (which I am currently using as a desktop with external monitor and keyboard) so I there may be a happy coincidence here.
Also, just checked on my touchpad, and the HP charger says charging (AC) as well as my phone charger, which I think started life destined for some Blackberry.
The powered hub should work though, and that would make a great machine for typing and working in bed as opposed to my laptop burning my thighs off.
feteru said:
Alright, thanks. I think I need to get a powered hub for my laptop (which I am currently using as a desktop with external monitor and keyboard) so I there may be a happy coincidence here.
Also, just checked on my touchpad, and the HP charger says charging (AC) as well as my phone charger, which I think started life destined for some Blackberry.
The powered hub should work though, and that would make a great machine for typing and working in bed as opposed to my laptop burning my thighs off.
Click to expand...
Click to collapse
I just verified that if you get the Micro USB Host OTG Cable With USB power ($6 from AppleCable on Ebay) that Ramjet73 mentioned (or this one), it will work with any standard USB charger (ie the 1 Amp HTC or 2 Amp HP Touchpad Charger) because the USB Power Connector is Isolated. I also picked up Applecable's USB 2.0 3 Port Hub with data Sync Charger cable for $7 (I may try to modify it to be a USB OTG powered hub with this).
I will be updating the OTG thread I mentioned earlier. See attached:
I've never successfully used OTG. I've bought 2 cables.
michaelgcarro said:
I've never successfully used OTG. I've bought 2 cables.
Click to expand...
Click to collapse
I've received a bad one before. Cut it open to verify the id pin hadn't been tied to ground like it was supposed to be. I can verify that OTG is enabled with the CM9 Nightly and jcsullin's latest Cm10.
Sent from my "Up all night, sleep all day" HP CM10 Touchpad
hey everyone, so i have been reading around and there are alot of people talking about the usb extention for the asus transformer.
Here is my thought: what if you used your existing usb charger/data cable and then but a female to female usb adapter on it? this has just been in my mind for a while and i saw that the adapter would cost around 3 instead of 20 for the asus branded one.
has anyone tried this or should i just get the adapter made by asus?
For $3 why not just try it and let us know?
I'm pretty sure this will not work, since the adapter has additional circuits to put the tf in usb otg (on the go) mode, which is the usb host functionality in plain english.
Yo will need an usb 3.0 cable. It won't work with a normal (2.0) one
As alluded to above, 2 different things.
The usb3 cable is an extension, the adapter is a hub (adding usb to the tab).
SuLuke said:
I'm pretty sure this will not work, since the adapter has additional circuits to put the tf in usb otg (on the go) mode, which is the usb host functionality in plain english.
Click to expand...
Click to collapse
thanks, i was just curious. Do you know where i could order one of the asus ones to canada?
Hello,
So I tried to hook up a Motorola Atrix 2 to a PNY USB Hub and it won't work, but the light showed up on it .
Here are all the stuff I used to make a full setup:
Female to Female USB
Y-Cable
Micro-USB Cable
USB Hub
Wall charger
I tried both ends of the Males and both not working
Any help would be highly appriciated
Thanks in advanced,
TCF38012
Buuuuuump!
Anyyyyyyyyyyyyone!?
tcf38012 said:
Buuuuuump!
Anyyyyyyyyyyyyone!?
Click to expand...
Click to collapse
Pics would be helpful. I assume you want to utilise USB OTG which requires a USB OTG cable, and an external VDD of +5V as the phone does not supply power via USB.
Sorry, i am new to this site but I wanted to know if I can use my standard USB charger, short out certain pins to be able to go into otg mode, I made my own female to male cable so I'm happy, but I was wanting to know if it was possible.
No. OTG uses different pins
killamonkey said:
Sorry, i am new to this site but I wanted to know if I can use my standard USB charger, short out certain pins to be able to go into otg mode, I made my own female to male cable so I'm happy, but I was wanting to know if it was possible.
Click to expand...
Click to collapse
You most definitely can, but you have to mod the 30-pin connector itself -- it can't be done on the other end of a USB cable. You will find all the info you need here:
http://forum.xda-developers.com/showthread.php?p=14612129
http://forum.xda-developers.com/showthread.php?t=1149442
I am trying to charge my Nexus 6P while simultaneously casting a streaming video from a USB drive to a Chromecast using a USB keyboard and mouse (Basically a computer replacement scenario). I have purchased the Cynergy 3 Port Ethernet Hub USB C with USB C connector and everything works independently but I can not seem to get it to simultaneously charge and read the USB port data. When the hub is inserted into the Nexus 6P the phone asks me to choose between 5 USB scenarios (see attached picture). When I pick “Charging” the USB ports stop working and when I unplug the power supply and then plug it back in the phone defaults to “Power supply” and the phone does not charge but the USB ports work along with the items connected to them. So I wonder if simultaneous charging and data is possible with the USB C connector on the Nexus 6P? I have read elsewhere in this forum that it may not be allowed in the USB standard but can’t find any confirmation of this. Has anyone found a cable/hub that can do this or is this not possible due to the USB C connector limitation?
You might want to try something like this.
https://www.amazon.com/Anker-Delive...hromeBook/dp/B01D0WE99C/ref=pd_sim_sbs_107_1?
Andrew025 said:
You might want to try something like this.
https://www.amazon.com/Anker-Delive...hromeBook/dp/B01D0WE99C/ref=pd_sim_sbs_107_1?
Click to expand...
Click to collapse
Why tell him to waste money on something that isn't going to work? The 6P doesn't support USB PD so this isn't possible.
i think you need to do some mad hacks in the kernel to get otg and charging at once (i think they did it on the oneplus 1 and possibly on the 2nd gen n7 so maybe google those for what it needs to be done?) i tried various resistors to the sense pin on the micro usb z4 which ended up not working but i have no idea how the usb c is wired up. Good luck with it anyway