Database Info

Stock Froyo Kernel

I'm looking for a CWM flashable stock Froyo kernel. Anyone have it?

jir591 said:
I'm looking for a CWM flashable stock Froyo kernel. Anyone have it?
Click to expand...
Click to collapse
Go to development section and READ! READ! READ!
Sent from my LG-P999 using Tapatalk

fcisco13 said:
Go to development section and READ! READ! READ!
Sent from my LG-P999 using Tapatalk
Click to expand...
Click to collapse
If you don't know the answer, don't respond. Responses like yours shows only reveals your stupidity.

jir591 said:
Responses like yours shows only reveals your stupidity.
Click to expand...
Click to collapse
Irony?
Sent from my LG-P999 using XDA App

i don't think what he's looking for is in the development section

Q&A for questions sir, though i would advice you to browse the development section and look for your answer... and dont post your stupid question there either or you are going to get the same flames you are going to get here...
jir591 said:
If you don't know the answer, don't respond. Responses like yours shows only reveals your stupidity.
Click to expand...
Click to collapse
most ironic response ever...
and because i know you are getting angry from nobody giving you a straight answer, there is no stock kernel that you can just flash so get creative and figure it out... if you cant figure it out then you shouldnt be flashing things on your phone...

it took me all of 10 seconds to find it. what is it that prevents people from searching for more than 5 seconds??????

crazythunder said:
it took me all of 10 seconds to find it. what is it that prevents people from searching for more than 5 seconds??????
Click to expand...
Click to collapse
you spend the time to find it, yet you don't post the link. I just don't understand some people.
I've searched and couldn't find it. I'm looking for the kernel NOT the ROM.

jir591 said:
you spend the time to find it, yet you don't post the link. I just don't understand some people.
I've searched and couldn't find it. I'm looking for the kernel NOT the ROM.
Click to expand...
Click to collapse
like i said before, there is no stock kernel to flash... so quit your *****ing

Is there a thread that says stock kernel
G2x with CM7 and faux 1.8 kernel. [email protected] 5091 quadrant.

jir591 said:
you spend the time to find it, yet you don't post the link. I just don't understand some people.
I've searched and couldn't find it. I'm looking for the kernel NOT the ROM.
Click to expand...
Click to collapse
there IS a kernel for froyo eaglesblood. where did you get the idea that kernels are available to download from manufacturers? i just don't understand some people.

crazythunder said:
there IS a kernel for froyo eaglesblood. where did you get the idea that kernels are available to download from manufacturers? i just don't understand some people.
Click to expand...
Click to collapse
he's looking for the original stock froyo kernel that came with the stock rom, not a kernel FOR froyo. he didn't say anything about downloading kernels from manufacturers either.
anyways, there is not a flashable stock kernel for download. go download a stock nandroid restore or stock rom and get your needed files (i believe boot.img? im not sure) extracted from there
maybe it's just me, but I feel like the thread is heading in the wrong direction because people who didn't read OP's questions clearly and replied, and on top of that there are a lot of unnecessary comments from both sides. But I mean, imagine if you made a thread asking for help and people simply reply telling you to search when it's not even there the first place. pretty annoying isnt it?

c19932 said:
he's looking for the original stock froyo kernel that came with the stock rom, not a kernel FOR froyo. he didn't say anything about downloading kernels from manufacturers either.
Click to expand...
Click to collapse
where else would a stock kernel come from? i'm pointing out the fact that when a phone is released and an image is dumped, how often do you see a kernel along with it? we usually get stock rom and baseband.

If he would have looked and take the time to read through the dev section he could have thought.... "hmm I could flash the original STOCK nandroid which contains the STOCK KERNEL or I can flash this one, faux123 LGE STOCK FROYO KERNEL" but instead he comes here and asks for a link....gime, gime, gime!
The op he states "I'm looking" but he is not looking.
G2X

crazythunder said:
it took me all of 10 seconds to find it. what is it that prevents people from searching for more than 5 seconds??????
Click to expand...
Click to collapse
the horrible search engine set up here. it isnt very good and needs to be redesigned and reworked. and having to wait 30 seconds between attempts just causes people give up/impatience (which we all have) and go post.
i dont have the kernel. i have been looking for it for a while and didn't find it in the dev section. not the completely stock kernel for foryo anyways. please post?? if you guys would and help us all out please?
FOUND IT! http://forum.xda-developers.com/showthread.php?t=1102720

Any GB roms that support HDMI and or 30FPS?

I am finaly getting some time to sit down and work see what I want to do with my Infuse. I have been doing a lot of reading and searching. I would love to go back go back to a GB rom. I loved them on my Captivate.
Saw how to get back to stock. Always want to know how to do that.
http://forum.xda-developers.com/showthread.php?t=1116251
In searching it seems like of I go to a GB rom that I see have the issue with video only shooting at 15fps and the HDMI does not work. I do not think I am finding any that do not have this issue. Am I correct on these finding?
Is this the only major under line problem that is with GB roms? I know every rom is going to have some issues. I really want to make sure I am good with working BT since I live near Chicago and if you talk on the phone you have to have BT or you will get your butt pulled over.
I am happy with the performance of my phone. I am not in great need to OC it. Though I am seeing people getting up to 1.6g.
I am just trying to figure out where to start. I saw a post today about a leaked GB rom for the Infuse but it was closed and the orginal post was removed. I am guessing that it was fake or something was up with it.
The HDMI out is not a huge issue for me. I would like to keep the 30fps. I do not use video that often. But there are time when all of a sudden I need to shoot video and I do not have my normal camera on me. That is where I love my phone.

In short, as of today, on this forum, the answer is no. Gotta wait until AT&T rolls out GB.

OK thanks. Think I might hold off on going to GB for now then. Hope I can hold out. LOL

Actually, there is a deodexed rom in the developement section which is of the new beta gingerbread for AT&T. The kernel that came with the leak supports HDMI out and 30fps. Although, some users report unreliable cell connections or loss of signal.
Search around, you'll find it.

Other than the new UCKI3 leak - nope.

Thank you.
Think I will give it a try.
Post a link below incase anyone come across this.
http://forum.xda-developers.com/showthread.php?t=1268028
At least I know how to go back to stock incase.

veener79 said:
Thank you.
Think I will give it a try.
Post a link below incase anyone come across this.
http://forum.xda-developers.com/showthread.php?t=1268028
At least I know how to go back to stock incase.
Click to expand...
Click to collapse
the link above doesnt support hdmi with the included kernel. you must flash the ucki3 kernel but recovery is hosed. i didnt want the complaints or redundant questions about how to flash out of it with no recovery.

Dani897 said:
the link above doesnt support hdmi with the included kernel. you must flash the ucki3 kernel but recovery is hosed. i didnt want the complaints or redundant questions about how to flash out of it with no recovery.
Click to expand...
Click to collapse
I need to flash to the [ROM][deodexed][leak][beta]I997UCKI3. Then I need to find the UCKI3 kernal and load that? Sorry little confused.

veener79 said:
I need to flash to the [ROM][deodexed][leak][beta]I997UCKI3. Then I need to find the UCKI3 kernal and load that? Sorry little confused.
Click to expand...
Click to collapse
for hdmi that would work or you can flash the full odex rom in odin that is posted in the general section.
an easy way to flash the ucki3 kernel without odin if you want to do it that way is to flash the deodexed rom then download sgs kernel flasher from the market. download the full odin package to your phone and open kernel flasher. choose the odin package as the kernel. the app is smart. it will find the zimage in there and flsah it.
remember to backup entropy's kernel first. if you need recovery you will need kernel flasher or odin to restore a kernel kernel with working recovery.
i hope we see something with bootloaders soon because without source code im not sure there will be a rainbow fix.
or if you wait an a few ill post the hdmi kernel as a cwm file. i still recommend to have kernel flasher either way. (it flashes cwm packaged kernels as well, even if they are packaged with a rom)

veener79 said:
I need to flash to the [ROM][deodexed][leak][beta]I997UCKI3. Then I need to find the UCKI3 kernal and load that? Sorry little confused.
Click to expand...
Click to collapse
Ok. So if u r a little confused with this, I'd recommend you wait until a proper GB rom is released by one of our devs.

diablo009 said:
Ok. So if u r a little confused with this, I'd recommend you wait until a proper GB rom is released by one of our devs.
Click to expand...
Click to collapse
Yeah, if you're not comfortable with odining/heimdalling kernels, I wouldn't mess with UCKI3 yet.

diablo009 said:
Ok. So if u r a little confused with this, I'd recommend you wait until a proper GB rom is released by one of our devs.
Click to expand...
Click to collapse
Entropy512 said:
Yeah, if you're not comfortable with odining/heimdalling kernels, I wouldn't mess with UCKI3 yet.
Click to expand...
Click to collapse
For me I flashed a lot of ROM's with my Captivate. I learned a lot. Number on this was if you are only 90% sure on something ask. Saw way to many people mess up their phone because they did not ask. So I got in this habbit.
I am not worried about doing it. I want to make sure I am doing it right. Once I get the first few flashes down in this phone I will be happy. It is just that the Infuse it a little different then the Captivate with flashing.

Entropy512 said:
Yeah, if you're not comfortable with odining/heimdalling kernels, I wouldn't mess with UCKI3 yet.
Click to expand...
Click to collapse
i wasn't comfortable with odining kernels and i'm glad i waited my friend tried it on his Infuse who had more experiences with this stuff and did it wrong now he had to reset it to stock LMAO plus to the OP how far from Chicago i live in Joilet

veener79 said:
For me I flashed a lot of ROM's with my Captivate. I learned a lot. Number on this was if you are only 90% sure on something ask. Saw way to many people mess up their phone because they did not ask. So I got in this habbit.
I am not worried about doing it. I want to make sure I am doing it right. Once I get the first few flashes down in this phone I will be happy. It is just that the Infuse it a little different then the Captivate with flashing.
Click to expand...
Click to collapse
Good news in this particular case - It's next to impossible to accidentally clobber our bootloaders. (Heck, we haven't even successfully flashed Rogers bootloaders onto an AT&T Infuse) Only one Infuse has ever had its bootloaders clobbered, and that was part of a highly dangerous experiment for which the device owner volunteered.
Pretty much for the time being (UCKH1 could change things once someone figures out how that update flashed a bootloader), it's basically impossible to fully brick a device with Odin/Heimdall - or CWM either.

Inspire 4G and the cyanogenmod (questions)

Im new to the android community and phones. I bought an Inspire with gingerbread (2.3.3) and would like to add cyanogenmod to it but the tutorials look so "harmfull" they scare me away so i have some question.
Can i downgrade from 2.3 to android v1?
Have anyone here rooted and flashed the same phone I have?
What is "radio? Can I change it to another one? how can I tell if it will work with my carrier?

please, please, please. READ
these questions you are asking concern me
1. you dont downgrade to v1....because it doesnt exist
2. we all have the same phone as you, otherwise we wouldnt have an inspire section
3. there is an entire thread dedicated to this very subject....look in the dev section.
there are easy to follow guides, tutorials, and walkthroughs here, but you have to READ...there is ZERO excuse for not reading and comprehending this stuff. if it is too much for you, you should NOT be doing any of it, and leave your phone stock

This is why I said..im NEW with this... none of what you helped in some way.

joandajer said:
This is why I said..im NEW with this... none of what you helped in some way.
Click to expand...
Click to collapse
then you have some READING to do. nobody here is going to hold your hand.
ALL the information you seek is already here, but you have to READ
Sorry if all you want is someone to hold your hand and spoonfeed information to you
NEW or not, it doesnt matter. I was NEW to this phone when i got it. I READ, the same way i have done with all my other phones. I READ to understand what i am doing and how to do it.
heres the first thing you should have read when you came to the inspire boards:
http://forum.xda-developers.com/showthread.php?t=1033353
its a sticky for a reason

Thanks for the link. Wil this tool The Ace Hack Kit work with 2.3.3 version? for rooting pourposes i mean?

joandajer said:
Thanks for the link. Wil this tool The Ace Hack Kit work with 2.3.3 version? for rooting pourposes i mean?
Click to expand...
Click to collapse
from the OP in the ACE Hack Kit thread:
Both stock Froyo and Gingerbread supported
Click to expand...
Click to collapse
this question has come up several times in the last month. yes it works just fine

Hi, i just rotted the unit and everything was fine
So i decided to use, cyanogenmod, it installed
now i can make calls but it does not connect to the data network portion.
Any ideas?
I noticed the radio baseband is slighly different than the original. could it be?

Sorry. was quick. i entered the APN settings and it is now connecting.. just Edge....before (stock rom) i had "H" (guessing is 3G). Now it only connects to E (edge i assume).
The weird thing is that before whenever i was in an area with only edge It would not allow me to browse but now I can.
any idea jedi master?

you can try a different radio. look at the radio thread in the dev section

Sorry to bother you so much. I was able to solve the radio issue. Now, since the market app wasn't included i followed the guide on how to install gapps but after doing so i can't get pass the boot screen "touch the android to begin".
I try to wipe and reflash but still does not let me do it. Any ideas?

did you touch the android to begin?

Yes, sir. But it will still restart.
i try to wipe data and restart the process but same thing happens.
Tried taping the four corners and an still happening.
Someone said the the gapps file might be corrupted.
Right now cyanogenmod is a pain. is there a way to install another room or the stock one through recovery?
Thanks for all your help!

joandajer said:
Yes, sir. But it will still restart.
i try to wipe data and restart the process but same thing happens.
Tried taping the four corners and an still happening.
Someone said the the gapps file might be corrupted.
Right now cyanogenmod is a pain. is there a way to install another room or the stock one through recovery?
Thanks for all your help!
Click to expand...
Click to collapse
you can install any rom you like in recovery.
boot into recovery
go to mounts and storage
mount usb storage
on your computer, copy the rom zip onto the phone
back,
install zip file from sdcard
browse to rom zip
confirm flash

Thank you. I am downloading RUU_Ace_Gingerbread_S_Cingular_US_2.47.502.7_Radio_12.56.60.25_26.10.04.03_M_release_200368_signed.exe.... is this the correct stock?
Does it have to be on ZIP? if so, where can i find stock roms?

joandajer said:
Thank you. I am downloading RUU_Ace_Gingerbread_S_Cingular_US_2.47.502.7_Radio_12.56.60.25_26.10.04.03_M_release_200368_signed.exe.... is this the correct stock?
Does it have to be on ZIP? if so, where can i find stock roms?
Click to expand...
Click to collapse
no. this will leave you an unrooted stock rom
why dont you browse the dev forum here and look at all the ROM offerings?

I think i will just go with the stock one and the do the same procedure (using the hack kit and just leave it stock rooted....
would that be ok?

joandajer said:
I think i will just go with the stock one and the do the same procedure (using the hack kit and just leave it stock rooted....
would that be ok?
Click to expand...
Click to collapse
No because you'll still have s-off just flash pirateghost's rom its similar to stock rooted and is always good
Sent from my Inspire 4G using XDA App

Nick281051 said:
No because you'll still have s-off just flash pirateghost's rom its similar to stock rooted and is always good
Sent from my Inspire 4G using XDA App
Click to expand...
Click to collapse
Gene Poole has a very nice stock sense 3.0 rom. its very stock. mine is slightly 'themed' with some added tweaks

Thanks I will try RUU and if that does not work will download the latest one he has: PD98IMG_Ace_Cingular_US_1.84.502.11_Radio_12.39a.60.19_26.06.06.30_M_release_184324_signed.zip

joandajer said:
Thanks I will try RUU and if that does not work will download the latest one he has: PD98IMG_Ace_Cingular_US_1.84.502.11_Radio_12.39a.60.19_26.06.06.30_M_release_184324_signed.zip
Click to expand...
Click to collapse
thats not the latest rom.
are you scared of the dev forums? lol
http://forum.xda-developers.com/forumdisplay.php?f=1018

[Q] Im a Noob with android Need help with Rooting.

So i got this Galaxy S 4G. and i rooted it with super one click.
But when i got Rom manager and put CWM on it didnt work. (i gave up)
now i wanna get Gingerbread 2.3
should i use Kies mini to update?
or is there another way i should update?
Also i want to get CWM so i can flash roms.
i know i need Odin but
do i need to be in DL mode. to root gingerbread?
also i wanna make sure i get CWM FORSURE!!!!
can anyone help me
BTW ive updated to Gingerbread before. but i couldnt figure out how to root is so i downgraded back to froyo.
on gingerbread i couldnt get my phone into Debugging Mode. (the bug wouldnt show on my status bar)

http://forum.xda-developers.com/showthread.php?t=1122508
http://forum.xda-developers.com/showthread.php?t=1305560
http://forum.xda-developers.com/showthread.php?t=1117554
http://forum.xda-developers.com/showthread.php?t=979109

LAWLKiPz said:
So i got this Galaxy S 4G. and i rooted it with super one click.
But when i got Rom manager and put CWM on it didnt work. (i gave up)
Click to expand...
Click to collapse
What is this rom manager you speak of? I've never heard of a working rom manager for this device. Does rom manager work? Perhaps the answer is posted here somewhere?

Exodian said:
What is this rom manager you speak of? I've never heard of a working rom manager for this device. Does rom manager work? Perhaps the answer is posted here somewhere?
Click to expand...
Click to collapse
No. Not yet.
http://forum.xda-developers.com/showthread.php?t=1305560
For GB, just flash (oden/heimdall/heimdall one-click) any gb kernel in the dev forum and you should get CWM (unless the kernel is a fully stock kernel, like the first one in my one-click collection).

A little lecture could help you. This has been answered like 100 times a day.
Use latestodin, flash ravers kj6 odin rom (yes, you have to be in dl mode and rom file goes in pda and i think you need to decompress the .zip file so u use the .tar) and after that just flash drhonk kj1 kernel so you can get root and cwm. Then you can flash gb roms without problem.
Theres a big post saying that Rom Manaher doesnt work wotj raver.

actualy rom manager has a Galaxy s 4G setting now so yes it does work

Exodian said:
What is this rom manager you speak of? I've never heard of a working rom manager for this device. Does rom manager work? Perhaps the answer is posted here somewhere?
Click to expand...
Click to collapse
Actually when i got Rom Manager i had a setting for Galaxy S 4G so im guessing the answer is yes.

LAWLKiPz said:
Actually when i got Rom Manager i had a setting for Galaxy S 4G so im guessing the answer is yes.
Click to expand...
Click to collapse
No. "NO" means "no".
If you don't believe me. Go ahead. Flash it, then wonder why you can't flash anything from it or do anything with it.
Everyone who has told you that it doesn't work is trying to save you time and headache.
---------- Post added at 03:06 PM ---------- Previous post was at 03:01 PM ----------
bhundven said:
No. "NO" means "no".
If you don't believe me. Go ahead. Flash it, then wonder why you can't flash anything from it or do anything with it.
Everyone who has told you that it doesn't work is trying to save you time and headache.
Click to expand...
Click to collapse
Also, tehgyb gave you all the good links (thanks man!)
Instead of insisting on using rom mangler, you should listen and read.
If all you want is clockwork mod + root + gb, just heimdall one-click my kj6 kernel and stock rom... The link that says: Download SMS KJ6 Kernel Stock Rom with Bootloaders
After you run that, you can flash roms with CWM (not rom manager) as you wish, and you will always have root with that kernel.

It doesnt work man..
Sent from my SGH-T959V using xda premium

coldcrush390 said:
It doesnt work man..
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
That was very informative!</sarcasm>
What doesn't work?
How were you flashing?
Did you see any errors?
Did you read the OP?

bhundven said:
That was very informative!</sarcasm>
What doesn't work?
How were you flashing?
Did you see any errors?
Did you read the OP?
Click to expand...
Click to collapse
I think he meant that ROM Manager doesn't work.
I don't get why people don't read stickies around here. I guess it's second nature if you've been on other forums before, but it's still no excuse. -.-

bkoon1218 said:
I think he meant that ROM Manager doesn't work.
Click to expand...
Click to collapse
Crap. I just realized that I was mixing threads. Good catch
bkoon1218 said:
I don't get why people don't read stickies around here. I guess it's second nature if you've been on other forums before, but it's still no excuse. -.-
Click to expand...
Click to collapse
Yea, I know how you feel: http://forum.xda-developers.com/showpost.php?p=20153370&postcount=9

how to odin back to stock

i saw a thread in here once but i cant find it..
my phone is not booting anymore it says system software no authorized by verizon
i need the stock image i have looked everywhere and cant find it
please help me

XTRoRDiNAiRE said:
i saw a thread in here once but i cant find it..
my phone is not booting anymore it says system software no authorized by verizon
i need the stock image i have looked everywhere and cant find it
please help me
Click to expand...
Click to collapse
Read this thread, section 6
http://forum.xda-developers.com/showthread.php?t=1762709
Also the issue you are most likely seeing is because you tried to flash a ROM with a kernel without first unlocking your bootloader. This is also explained in the above thread.

Sccrluk9 said:
Read this thread, section 6
http://forum.xda-developers.com/showthread.php?t=1762709
---------- Post added at 10:45 AM ---------- Previous post was at 10:43 AM ----------
Also the issue you are most likely seeing is because you tried to flash a ROM with a kernel without first unlocking your bootloader. This is also explained in the above thread.
Click to expand...
Click to collapse
when i try and download the stock kernel the site is not working i guess
is there another place where i can find that stock kernel

XTRoRDiNAiRE said:
when i try and download the stock kernel the site is not working i guess
is there another place where i can find that stock kernel
Click to expand...
Click to collapse
wrong link

Sccrluk9 said:
wrong link
Click to expand...
Click to collapse
so i dont use that fixboot tar?

what i dont get is isnt the root66 tar already have a stock kernel in it?

XTRoRDiNAiRE said:
what i dont get is isnt the root66 tar already have a stock kernel in it?
Click to expand...
Click to collapse
I believe so but Im not positive. Never used root66

i was able to get passed that verizon screen but now im on a bootloop. im assuing i need the stock kernel now
can anyone please link me to a working stock kernel please
id greatly appreciate the help

XTRoRDiNAiRE said:
i was able to get passed that verizon screen but now im on a bootloop. im assuing i need the stock kernel now
can anyone please link me to a working stock kernel please
id greatly appreciate the help
Click to expand...
Click to collapse
Can you get into recovery? If so wipe/factory restore and flash the stock ROM or a custom one WITHOUT a custom kernel. I would suggest just going back to stock ROM and starting fresh. If you made a backup (which you should have) you can just go back to that too. Just remember to unlock your bootloader before you put a new ROM on.

XTRoRDiNAiRE said:
i was able to get passed that verizon screen but now im on a bootloop. im assuing i need the stock kernel now
can anyone please link me to a working stock kernel please
id greatly appreciate the help
Click to expand...
Click to collapse
the link for the kernel worked fine for me just now in that thread. Might have been having site difficulties or something when you first tried.
http://samsung-updates.com/kernel/Samsung-Updates.com-SCH-I535-VZW-I535VRALF2_Kernel.zip
Theres the direct download link from samsung for ya.

XTRoRDiNAiRE said:
i saw a thread in here once but i cant find it..
my phone is not booting anymore it says system software no authorized by verizon
i need the stock image i have looked everywhere and cant find it
please help me
Click to expand...
Click to collapse
Yes you must flash the stock kernel after the vzw screen of death. Using root66 makes it easier to get back up and running. One less thing to do and you can then down load ez unlock & ez recovery to unlock boktloader/ flash cwm.

Thank you everyone for responding
Everyone was very helpful
I was able to get the phone back to stock and I went into a store to exchange it because I had that permanent roaming thing
So now I learned my lesson and first thing I did with the new device is back up my imei..
Sent from my SCH-I535 using Tapatalk 2

XTRoRDiNAiRE said:
So now I learned my lesson and first thing I did with the new device is back up my imei..
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I gotta get around to that one of these days before it ends up biting me in there arse.
-Need to figure out how to do something with your phone? Check out this Guide
-Did my rantings somehow help you? Hit the thanks button [email protected] :silly:
-Sent from my Synergized SIII

Always, I mean always make sure b4 flashing to root then unlock the bootloader and u will never have that prob.
Sent from my synergized SCH-I535