Related
[ROM] Official Froyo 2.2.1 - Retail Brasil - Rooted & Overclocked Nandroid available
Official Froyo 2.2.1 Update for Milestone - Retail BrazilYou need to flash the stock 2.1 ROM and use Motorola Software Update to get your phone updated to Froyo ( 2.2.1 ). If you are already running 2.1, just use MSU to update and retain your apps. If you are running a custom rom and want to get back to stock, please look at this thread for more information.
Official 2.1 Retail Brazil sbf's can be downloaded from the links below.
http://www.4shared.com/get/7769hgSD/...AE6E3DB7.dc322
http://www.multiupload.com/E7Z8DN94I3 (thnx rasstaylor)
You can update your phone after flashing the 2.1 sbf file by downloading the MSU. You can use this link to download the Motorola Software Updater.
Vulnerable recovery sbf and kernel from this ROM as a flashable zip file are attached. Nandroid back of this ROM, rooted and overclocked can be found here.
Many thanks to Sileshn and rasstaylor for their help. Credits to blogdoandroid.com for the information.
The wait is over. The moment that many were waiting, arrived. Motorola has finally released an Android 2.2 Froyo for Milestone, fulfilling his promise. Were 8 months of delay over the Droid, the American model of Milestone, but who was counting right? We were.
The wait continues for those who bought with operator (TIM, VIVO, CLARO, OI)
We were surprised with some cosmetic changes, you can check out the following photos below. The lock screen, Screen Lock, was redesigned, becoming different from the original Froyo Google as well as the Launcher (the screen that shows icons for apps. She was like the Eclair (Android 2.1). It is speculated that this was done to improve performance.
In addition to traditional apps already installed on the Milestone, a Facebook app was included. Motorola has certainly gained a quick buck to get it.
Another interesting accretion was a mini app to access the chip carrier, in my case of HI. Previously there was only app SIM Tool Kit, which has now been renamed to World HI. Besides this, has added another app, which is nothing more than two links to web pages of the operator, plus a link to the SIM Tool Kit SIM Tool Kit, or STK is very important for users of the HI, because allows us to check the credit balance.
marcelotorres said:
Update for Milestone avaible on Brazil
To get it, flash to 2.0 or 2.1 official rom's and download the MSU from Motorola Brazil
Official Eclair Retail Brazil: http://www.multiupload.com/UE1PDEVUDG
Motorola MSU: http://direct.motorola.com/PRL/Soft...e&strCable=Micro USB Data Cable&strURL=No URL
Click to expand...
Click to collapse
Finally....but i thought that it would be OTA... damn... will only be able to test tomorrow!
Anyone can try it fast and tell us about kernel version and DSI errors?
Sent from my Milestone using XDA Premium App
wisefreakz said:
Finally....
Sent from my Milestone using XDA Premium App
Click to expand...
Click to collapse
Really Finally!!!!
wisefreakz said:
Finally....but i thought that it would be OTA... damn... will only be able to test tomorrow!
Anyone can try it fast and tell us about kernel version and DSI errors?
Sent from my Milestone using XDA Premium App
Click to expand...
Click to collapse
This is Retail Brazil, and it could be downloaded using MSU. Just flash 2.0 or 2.1 stock rom from Brazil and connect to usb...
marcelotorres said:
This is Retail Brazil, and it could be downloaded using MSU. Just flash 2.0 or 2.1 stock rom from Brazil and connect to usb...
Click to expand...
Click to collapse
Have you tried it?
Sent from my Milestone using XDA Premium App
flashing 2.1 as we speak.
wisefreakz said:
Have you tried it?
Sent from my Milestone using XDA Premium App
Click to expand...
Click to collapse
I'm installing 2.1 and will test as soon as possible and will report here.
U can test it too
Hi ... I just apllied this update... and nowww. I cant flash the vunerable recovery....
So, it means that I cant root the phone or have Open Recovery....
Tryed Many differents downloads of Vunerable Recovery and always get Fail in RSD Lite...
Does anyone can help me???
mcpterra said:
Hi ... I just apllied this update... and nowww. I cant flash the vunerable recovery....
So, it means that I cant root the phone or have Open Recovery....
Tryed Many differents downloads of Vunerable Recovery and always get Fail in RSD Lite...
Does anyone can help me???
Click to expand...
Click to collapse
Can you check the bootloader version?
Sent from my Milestone using XDA Premium App
Hi Sileshn, good evening...
Like I said in my last post... after udate my Miles from MSU everything gone fine, but I cant flash vunerable recovery... RSD always fail.....
Any tips ?
Course... Just a second, because I am in boot loader mode....
mcpterra said:
Hi Sileshn, good evening...
Like I said in my last post... after udate my Miles from MSU everything gone fine, but I cant flash vunerable recovery... RSD always fail.....
Any tips ?
Click to expand...
Click to collapse
Can you apply any other sbf and try VR?
Sent from my Milestone using XDA Premium App
mcpterra said:
Hi Sileshn, good evening...
Like I said in my last post... after udate my Miles from MSU everything gone fine, but I cant flash vunerable recovery... RSD always fail.....
Any tips ?
Click to expand...
Click to collapse
As i read in Orkut (http://www.orkut.com.br/Main#CommMs...74328-5587691021188973156-5587733185486178487) this rom doesn't need Vulnerable image because it's opened...
Here its Kernel version
2.32.9
[email protected] #1
Version
SHLA_U2_05.14.0
I havent tryed yet.... but seems a good choise...
marcelotorres said:
As i read in Orkut (http://www.orkut.com.br/Main#CommMs...74328-5587691021188973156-5587733185486178487) this rom doesn't need Vulnerable image because it's opened...
Click to expand...
Click to collapse
That can't be true. Maybe unlocked bootloader.
sileshn said:
That can't be true.
Click to expand...
Click to collapse
Yep.. not true.
What a guy said is that market is open and does not need root. Does not make any sense...
Sent from my Milestone using XDA Premium App
marcelotorres said:
As i read in Orkut (http://www.orkut.com.br/Main#CommMs...74328-5587691021188973156-5587733185486178487) this rom doesn't need Vulnerable image because it's opened...
Click to expand...
Click to collapse
Hey really ???
What can I do now?!? Already copied AOR into Sdcard and update.zip file but any luck in get Recovery menu
mcpterra said:
Here its Kernel version
2.32.9
[email protected] #1
Version
SHLA_U2_05.14.0
Click to expand...
Click to collapse
Different from all others around...
What you say Sileshn?
Sent from my Milestone using XDA Premium App
mcpterra said:
Hey really ???
What can I do now?!? Already copied AOR into Sdcard and update.zip file but any luck in get Recovery menu
Click to expand...
Click to collapse
Flash back other sbf and see if you can revert.
Sent from my Milestone using XDA Premium App
Ok,
So i recently upgraded to the newest gingerbread release (4.5.588.MB810.Verizon.en.US) It has since been rooted but I am not quite sure how to go about getting it rooted. Do I need to SBF back to a lower firmware and go back up or is there an easier way? I have a bootloader version 30.04 so im not quite sure which SBF i need to be using so that I dont brick my phone. If you guys could include links to what I need to be using that would be great.
I really appreciate all of your time.
Thanks,
mmaibl2011
Yes you need to be on the latest Froyo firmware which 2.3.340 so you have to SBF . Just go to My Droid World and search for Gingerbread 2.3.3 and you see lots of threads which give you a complete break down of how to do it .
jawonder said:
Yes you need to be on the latest Froyo firmware which 2.3.340 so you have to SBF . Just go to My Droid World and search for Gingerbread 2.3.3 and you see lots of threads which give you a complete break down of how to do it .
Click to expand...
Click to collapse
I downloaded the system only version of 2.3.340 and it said flashing failed. Can you give me a link to exactly which SBF i need to be using and instructions?
Thanks,
mmaibl2011
mmaibl2011 said:
I downloaded the system only version of 2.3.340 and it said flashing failed. Can you give me a link to exactly which SBF i need to be using and instructions?
Thanks,
mmaibl2011
Click to expand...
Click to collapse
You can't use the system only file to sbf you have to have the complete SBF which you can find on MDW like stated above
http://www.youtube.com/watch?v=N0jrXqqiepI&feature=youtube_gdata_player
Video tutorial on full and with files
Sent from my DROIDX using XDA App
z4root is what I used. I just upgraded moments ago myself. I hope you did a backup.
z4root 1.30 is what you need. One touch. Your rooted
Lol.
(I'm on the mobile version. Sorry a out a link.)
Sent from my Motorola® DROID™ X™ using the XDA Premium Android Application.
Please help...flashing a stock rom by odin unvalidate the warranty?
my sister's phone ( i9003 ) doesn't boot and i tried to flash another stock but nothing...i want to know if warranty is good...
Yes
Sent from my GT-I9003 using xda premium
Just flash a rom of your region and you would have your warranty back.
where i can find gingerbread of italy? =)
coolpix90 said:
where i can find gingerbread of italy? =)
Click to expand...
Click to collapse
Here is the link:http://www.hotfile.com/dl/136015507/6f1d569/I9003XIKP2_I9003ITVKP4_ITV.zip.html
coolpix90 said:
Please help...flashing a stock rom by odin unvalidate the warranty?
my sister's phone ( i9003 ) doesn't boot and i tried to flash another stock but nothing...i want to know if warranty is good...
Click to expand...
Click to collapse
hope this helps. goodluck
http://forum.xda-developers.com/showthread.php?t=1004647
http://forum.xda-developers.com/showthread.php?t=1133787
i have Nexus S korean version (M200). Now, running ics 4.0.4(stock rom), and i try to check update Jeanbean. But i get " the system i currently up to date" . Cann't M200 update JB?? who can help me about this?? :crying:
I'm pretty sure that it's going to take a long time for KT to update to JB. M200's update is from KT not Google. That's why it takes more time for M200 than other variants. But you can always root and flash custom ROMs like me.
Sent from my Nexus S using Tapatalk
ljordan2 said:
I'm pretty sure that it's going to take a long time for KT to update to JB. M200's update is from KT not Google. That's why it takes more time for M200 than other variants. But you can always root and flash custom ROMs like me.
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
thank u very much.. hix, i think stock rom than better. but long time wait for update... i will update cook rom
JB on K200
ljordan2 said:
I'm pretty sure that it's going to take a long time for KT to update to JB. M200's update is from KT not Google. That's why it takes more time for M200 than other variants. But you can always root and flash custom ROMs like me.
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
Still there is no sight of JB on M200, therefore I have decided to try custom ROM meanwhile. Is that a safe bet?
Could you please help? (searched forum but could not find. still a noob here)
Nexus S [I9023] :4.0.4 :: MM200KRKC1:: IMM76D::Rooted
zeehere said:
Still there is no sight of JB on M200, therefore I have decided to try custom ROM meanwhile. Is that a safe bet?
Could you please help? (searched forum but could not find. still a noob here)
Nexus S [I9023] :4.0.4 :: MM200KRKC1:: IMM76D::Rooted
Click to expand...
Click to collapse
Yeah, you can try, M200 is almost same as i9020t, so no problem.
Sent from my Nexus S using Tapatalk 2
Articudos said:
Yeah, you can try, M200 is almost same as i9020t, so no problem.
Sent from my Nexus S using Tapatalk 2
Click to expand...
Click to collapse
Thanks,
Could you please help me with some links for downloading the custom ROM for M200
zeehere said:
Thanks,
Could you please help me with some links for downloading the custom ROM for M200
Click to expand...
Click to collapse
Can we flash any I9020 rom (available on Nexus S Android Development section) to Nexus S M200 (Korean) ?
zeehere said:
Thanks,
Could you please help me with some links for downloading the custom ROM for M200
Click to expand...
Click to collapse
ghanchi2000 said:
Can we flash any I9020 rom (available on Nexus S Android Development section) to Nexus S M200 (Korean) ?
Click to expand...
Click to collapse
Download any ROM(customROM for 3G), but if you flash stock ROM, use factory image(stock ROM) for I9020t/i9023.
Sent from my Nexus S using Tapatalk 2
Articudos said:
Download any ROM(customROM for 3G), but if you flash stock ROM, use factory image(stock ROM) for I9020t/i9023.
Sent from my Nexus S using Tapatalk 2
Click to expand...
Click to collapse
Thanks for all guidance.
I have managed to update my Nexus-S (M200-Korean) to Jelly Bean.
First I updated with the stock image of international version using this thread
http://forum.xda-developers.com/show...20&postcount=1
This changed the baseband version from M200 to XXXKl1
After reboot I was able to get 4.1.1 via OTA
I haven't seen any problems so far
Are there any that I may not have experienced yet?
[Nexus S][4.1.1][JRO03E]
zeehere said:
Thanks for all guidance.
I have managed to update my Nexus-S (M200-Korean) to Jelly Bean.
First I updated with the stock image of international version using this thread
http://forum.xda-developers.com/show...20&postcount=1
This changed the baseband version from M200 to XXXKl1
After reboot I was able to get 4.1.1 via OTA
I haven't seen any problems so far
Are there any that I may not have experienced yet?
[Nexus S][4.1.1][JRO03E]
Click to expand...
Click to collapse
Link: 404 page not found.:/
Radio compatitability depends on where u live.
If you experienced problem, look for this thread
http://forum.xda-developers.com/showthread.php?t=1116884
And flash krkc1 again.
If it's not compatitable, it can cause sudden signal drops and low mobile data speed.(afaik)
Sent from my Nexus S using Tapatalk 2
Thanks for the information. So far its been good. Will keep a watch.
Sent from my Nexus S using xda app-developers app
Correct the link
zeehere said:
Thanks for all guidance.
I have managed to update my Nexus-S (M200-Korean) to Jelly Bean.
First I updated with the stock image of international version using this thread
http://forum.xda-developers.com/show...20&postcount=1
This changed the baseband version from M200 to XXXKl1
After reboot I was able to get 4.1.1 via OTA
I haven't seen any problems so far
Are there any that I may not have experienced yet?
[Nexus S][4.1.1][JRO03E]
Click to expand...
Click to collapse
The link is wrong.Please post the correct link please.I have been using ics on m200 so far.Its good.I would like to know if you've experienced
any issues on JB?
This is the link. Follow only the first procedure. Then you would automatically get JB via OTA.
caution: it worked for me. May or may not work for you. As one senior member said in this post, it all depends on your location. (Country)
http://forum.xda-developers.com/showthread.php?t=1785672
So far I have not experienced any problems.
Sent from my Nexus S using xda app-developers app
Confirmation
zeehere said:
This is the link. Follow only the first procedure. Then you would automatically get JB via OTA.
caution: it worked for me. May or may not work for you. As one senior member said in this post, it all depends on your location. (Country)
http://forum.xda-developers.com/showthread.php?t=1785672
So far I have not experienced any problems.
Sent from my Nexus S using xda app-developers app
Click to expand...
Click to collapse
I am from Kolkata,India.Using m200 korean model.Have the same problem as the threadstarter.I guess when you're using it smoothly then inshallah,i too would.
Just to be pretty sure,you're telling me to follow ONLY this:
First up, let me tell you that doing this is not necessay to get the OTA or having a smooth JB experience. The JB OTA installs without a wipe which means the data is preserved.
UPDATE: Google has put up the full image for 4.1.1 [i9023, i9020a and i9020t] . Now you do not need to clean flash ICS and then JB. Follow the part 1 of the guide below and flash the JB image instead of ICS. Nothing more to it.
Thanks anshumandash for pointing it out
That being said, I wanted to have the real stock image on my Nexus S and then Upgrade to JellyBean. Below are the steps that I took.
Go to this GoogleAndroidImages page and download the appropriate image for your phone & download. Since mine is an international version a.k.a I9023, I chose that ROM.
The download will be a tar.gz file. Use a utility like 7Zip to uncompress it. The tar.gz will have a .tar file inside and the /tar file will have a folder. Extract the folder to your PC. For my download, the folder was named soju-imm76d
Next Steps will wipe your phone, completely
Reboot your phone into bootloader mode.
Open a command prompt, navigate to the folder in step 2.
Enter the below commands, the image file names are for my download, modify it to the file names in your folder before running (I assume that you have fastboot working)
fastboot flash bootloader bootloader-crespo-i9020xxkl1.img
fastboot reboot-bootloader
fastboot flash radio radio-crespo-i9020xxki1.img
fastboot reboot-bootloader
fastboot -w update image-soju-imm76d.zip
Click to expand...
Click to collapse
RIGHT?Meaning just the above process?
---------- Post added at 06:52 PM ---------- Previous post was at 06:47 PM ----------
also,this means it'll wipe all my data/apps/settings ? ?
Yes you too can try..
for me, after the first step , I rebooted a couple of times and automatically got JB via OTA.
Insha-Allah you should also get the same.
But proceed with caution and download factory ICS image from google.
Sent from my Nexus S using xda app-developers app
zeehere said:
Yes you too can try..
for me, after the first step , I rebooted a couple of times and automatically got JB via OTA.
Insha-Allah you should also get the same.
But proceed with caution and download factory ICS image from google.
Sent from my Nexus S using xda app-developers app
Click to expand...
Click to collapse
You dere?.i downloaded m200 again and installed it.Which one did you download?
soju ,sojua, or sojuk?
i guess i was supposed to download soju
Yes you should have downloaded soju. Sojuk is the same Korean one.
Sent from my Nexus S using xda app-developers app
Hi,
I recently updated my Atrix 2 to ICS (OTA). however now i am trying to flash supecharged atrix (SCV7) Rom,but it gives me a message saying "Signature verification failed"! what could be the possible reason?am i doing something wrong?
my phone is rooted and i tried both restoring and flashing the ROM but all in vain.I am Using the stock recovery as suggested in the forum.
please advise!
cheers!
thordroid said:
Hi,
I recently updated my Atrix 2 to ICS (OTA). however now i am trying to flash supecharged atrix (SCV7) Rom,but it gives me a message saying "Signature verification failed"! what could be the possible reason?am i doing something wrong?
my phone is rooted and i tried both restoring and flashing the ROM but all in vain.I am Using the stock recovery as suggested in the forum.
please advise!
cheers!
Click to expand...
Click to collapse
Questions belong in the Q&A Section.
The signature verification failed because SCV7 is based on our ICS leak. Which is TOTALLY different than the OTA update you recieved. There are currently no ROMs available for the firmware you are on.
thordroid said:
Hi,
I recently updated my Atrix 2 to ICS (OTA). however now i am trying to flash supecharged atrix (SCV7) Rom,but it gives me a message saying "Signature verification failed"! what could be the possible reason?am i doing something wrong?
my phone is rooted and i tried both restoring and flashing the ROM but all in vain.I am Using the stock recovery as suggested in the forum.
please advise!
cheers!
Click to expand...
Click to collapse
You should be flashing SCV7 though bootmenu bootstrap. or other cwm based recovery... not stock
farshad525hou said:
You should be flashing SCV7 though bootmenu bootstrap. or other cwm based recovery... not stock
Click to expand...
Click to collapse
Lol farshad, you're so right. I didn't even read that part of his post.
Fall the Moron.... Lol.
Sent from my SAMSUNG-SGH-I727 using xda premium
thordroid said:
Hi,
I recently updated my Atrix 2 to ICS (OTA). however now i am trying to flash supecharged atrix (SCV7) Rom,but it gives me a message saying "Signature verification failed"! what could be the possible reason?am i doing something wrong?
my phone is rooted and i tried both restoring and flashing the ROM but all in vain.I am Using the stock recovery as suggested in the forum.
please advise!
cheers!
Click to expand...
Click to collapse
Possibly that rom is only for the leak ics not for the ota? And you dont use stock recovery you have to use bootmenu or safestrap to install.
willyyumm27 said:
Possibly that rom is only for the leak ics not for the ota? And you dont use stock recovery you have to use bootmenu or safestrap to install.
Click to expand...
Click to collapse
i did try.i guess i softbricked my phone i installed the atrix bootstrap wiped cache,factory reset and tried to flash SCV7.
it said install successful but now when rebooted.i get this AP flashboot screen(boot failure) message.
do i need flash the OTA update via RSD lite? please advice!
thordroid said:
i did try.i guess i softbricked my phone i installed the atrix bootstrap wiped cache,factory reset and tried to flash SCV7.
it said install successful but now when rebooted.i get this AP flashboot screen(boot failure) message.
do i need flash the OTA update via RSD lite? please advice!
Click to expand...
Click to collapse
If you're coming from the official OTA for ICS, and tried to flash SCv7 (which is based on our AT&T leak) you likely have soft bricked your device. You cannot flash an unofficial leak version of a ROM to an official ICS ROM, you should have thought this through a little better. I'm sorry to say, but you're probably S.O.L. (Google that, if needed)...
Apex_Strider said:
If you're coming from the official OTA for ICS, and tried to flash SCv7 (which is based on our AT&T leak) you likely have soft bricked your device. You cannot flash an unofficial leak version of a ROM to an official ICS ROM, you should have thought this through a little better. I'm sorry to say, but you're probably S.O.L. (Google that, if needed)...
Click to expand...
Click to collapse
Its just the system+data naa??..so how come he cant flash it??
Sent from my MB865 using xda app-developers app
is there no way out?
devilhunter47 said:
Its just the system+data naa??..so how come he cant flash it??
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Oh Cmon! is there really no way out?i just got this phone last month..there must be something i could do!
wouldnt the leak work if i try Fxz ing it through RSD LITE?
can i FXZ this to 2.3.5? would that be of help?
thordroid said:
Oh Cmon! is there really no way out?i just got this phone last month..there must be something i could do!
wouldnt the leak work if i try Fxz ing it through RSD LITE?
Click to expand...
Click to collapse
Dont ever try to fxz from ota ics to gb..you'll hard brick
Sent from my MB865 using xda app-developers app
No you cannot fxz back from the official ota. You're bricked mate, sorry dude, send in for a replacement.
While you're at it read the sticky in the general section about why we all recommend to NOT to OTA to ICS.
There have been many warnings about this for over month.
Best of luck to you.
Sent from my SAMSUNG-SGH-I727 using xda premium
Atrix 2 brick
I've bricked my atrix 2 and reinstalled the original rom with an application from Motorola that let me force the original back on my device. But I did not have ics. So I'll look up the application and the original rom. Later tonight or tomorrow.
You can FXZ from ICS to GB
Fall of Enosis said:
No you cannot fxz back from the official ota. You're bricked mate, sorry dude, send in for a replacement.
While you're at it read the sticky in the general section about why we all recommend to NOT to OTA to ICS.
There have been many warnings about this for over month.
Best of luck to you.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Hey wat up?
I wasnt sure if this would work but since my phone was already soft bricked i thought of giving it a shot anyways and tried jimbridgmans utility to get back to GB from ICS..and Guess what?? it worked and My phone is back to Life !!!
Here is the thread :
http://forum.xda-developers.com/showthread.php?t=1805975
I am from INDIA, the script in the thread would flash US ATT version.I am going to FXZ the ASIA Retail version tonight and take it from there.
thanks a bunch for the help guys. Cheers!
thordroid said:
Hey wat up?
I wasnt sure if this would work but since my phone was already soft bricked i thought of giving it a shot anyways and tried jimbridgmans utility to get back to GB from ICS..and Guess what?? it worked and My phone is back to Life !!!
Here is the thread :
http://forum.xda-developers.com/showthread.php?t=1805975
I am from INDIA, the script in the thread would flash US ATT version.I am going to FXZ the ASIA Retail version tonight and take it from there.
thanks a bunch for the help guys. Cheers!
Click to expand...
Click to collapse
no dont cross flash..you'll end up with a hard brick
Fall of Enosis said:
No you cannot fxz back from the official ota. You're bricked mate, sorry dude, send in for a replacement.
While you're at it read the sticky in the general section about why we all recommend to NOT to OTA to ICS.
There have been many warnings about this for over month.
Best of luck to you.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Thanks a lot mate!
It is due to recommendation of you guys that I'm still on GB, which is quite snappier than ICS. :good:
I am going to stick with GB too,no more flashing until a stable CM 10 is out
Sent from my MB865 using xda app-developers app