[MOD]Motorola Motoluxe XT615 MotoRoX ROM & Jelly Bean 4.2 theme by enox [13.02.2013]
Motorola Motoluxe XT615 MotoRoX ROM & Jelly Bean 4.2 theme by enox
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
foreword:
-------->please read the complete instructions before you start anything<---------
-------->it is very important to follow this install instructions carefully<---------
-------->if you don´t follow it your device get into a never ending Bootloop or apps getin "forced to close"<---------
-------->if you have questions or any problem write here in thread or pm me<---------
-------->noone is allowed to upload & share my files without my agreement<---------
preparation & requirements for the Jelly Bean theme:
You have to flash one of this ROM´s before you are able to install the Jelly Bean 4.2 theme:
MotoRoX ROM for Motoluxe XT615 by enox
or
[ROM] Relentless ROM | v1.0 | Motorola Motoluxe XT615
Motorola Motoluxe XT615 MotoRoX ROM by enox
features in MotoRoX ROM:
- Deodexed
- Prerooted (SuperSU)
- Busybox
- init.d supported with some performance scripts
- Zipaligned
- all stocked Motorola stuff removed
- performance & space optimized
- Multilanguage support !
.
.
.
preparation:
You need a compatible firmware running on your Motoluxe as base.
The following firmwares are fully compatible with "Motorola Motoluxe XT615 MotoRoX ROM":
IRM-1670-0-4073 *confirmed*
IRM-1540-0-4073 *confirmed*
IRM-167A-0-4053 *confirmed*
I use firmware: IRM-1670-0-4073
Firmware: IRM-1670-0-4073-A02
RSD lite: RSD lite 5.7
Installation:
1. Download the MotoRoX_ROM_Multilanguage_by_enox.zip - 111.86 MB here !
2. Copy it to your sdcard
3. start Temp Clockworkmod Recovery v6.0.2.8 for Motorola Motoluxe XT615
4. I recommend to make a nandroid backup before flashing...
5. I recommend to format the following partitions before flashing: /system /data and /cache
6. Now flash the ROM
7. After this just reboot...
instructions for theme installation: (MotoRoX ROM user)
1. now download the MotoRoX-Jelly-Bean-4.2-theme_by_enox.zip and copy it to your sdcard
MotoRoX-Jelly-Bean-4.2-theme_by_enox.zip
2. start cwm recovery and flash the MotoRoX-Jelly-Bean-4.2-theme_by_enox.zip you have copied to your sdcard
3. ....reboot your Motoluxe and wait....the first boot can take 2-3 minutes
preparation for "Relentless ROM" users:
1. download: setup_kit_for_motoluxe_jb_theme.zip and copy it to your sdcard
2. start cwm recovery and flash the "setup_kit_for_motoluxe_jb_theme.zip" (This installs only the adwlauncher)
3. after flashing reboot your device............now set up adwlauncher & set it as main launcher (Because the stocked launcher doesn´t work with this theme)
4. now your device is ready for theme installation...........
instructions for theme installation: (Relentless ROM user)
1. before you flash this theme make sure you have "no widgets" on your home screen! and you have to set a new background image "Wallpaper" that is saved on SDcard
(because after flashing the jelly bean theme the launcher has no longer access to the stocked background images "Wallpapers")
2. now download the Motoluxe_XT615_Jelly_Bean_4.2_B13.12.2012.zip and copy it to your sdcard
Motoluxe_XT615_Jelly_Bean_4.2_B13.12.2012.zip - 18.42 MB
3. start cwm recovery and flash the Motoluxe_XT615_Jelly_Bean_4.2_B13.12.2012.zip you have copied to your sdcard
5. ....reboot your Motoluxe and wait....the first boot can take 3-4 minutes
>>>>>important information!<<<<<(for MotoRoX & Relentless ROM user)
if you want to remove the Jelly Bean 4.2 theme/ or if you want to do a factory reset
... you have to reflash your ROM(MotoRoX ROM or Relentless ROM) first!
if you don´t do this first your device will get into a bootloop!
...the Motoluxe_XT615_Screenshot_MOD only works with my Motorola Motoluxe XT615 Jelly Bean 4.2 theme
additional colour skins & custom stuff @2nd post!
changelog:
Code:
[B][U]19.10.2012 | enox_Jelly_Bean_Theme_RC_1[/U][/B]
-initial release
[B][U]20.10.2012 | enox_Jelly_Bean_Theme_RC_1.1[/U][/B]
-fixed unlocker bug
-added optimized stocked launcher
-remove bug from updater-script
[B][U]23.10.2012 | enox_Jelly_Bean_Theme_RC_1.2[/U][/B]
-new framework-res.apk "hope this fix bootloops etc"
-removed launcher from last build...
[B][U]25.10.2012 | enox_Jelly_Bean_Theme_RC_1.2[/U][/B]
-install instructions "updated"
-second edit: complete updated install instructions " now it should on every firmware "
[B][U]26.10.2012 | enox_Jelly_Bean_Theme_RC_1.3[/U][/B]
-added hololauncher
-added new framework
-added Motoluxe-framework-patcher
-new install instructions-
[B][U]01.11.2012 | enox_Jelly_Bean_theme_v2.0[/U][/B]
-complete new framework-res.apk
-fixed all known app problems
-performance optimized
-added new bootanimation
-Multilanguage update ... now it should support all languages....
-just find it out :)
-edit: Motorola-XT615-framework-patcherx.zip download link fixed .
-edit: fixed Deskclock.apk
[B][U]02.11.2012 | enox_Jelly_Bean_theme_v2.1[/U][/B]
-fixed updader-script"now it installs the bootanimation correct
-removed framework-patcher & edit: install instructions
-fixed DeskClock.apk
-edit: addet "solution if your apps get forced close"
-I think now this install instructions are easy to understand and works for everyone...
-please give me a feedback....
-added a link to my Motoluxe-Wallpaper-pack
[B][U]06.11.2012 | enox_Jelly_Bean_theme_v3.0[/U][/B]
-new launcher (adw)
-added google music
-fixed note app
-...i would say everything is new :)
[B][U]29.11.2012 | Motoluxe XT615 Jelly Bean 4.2 theme[/U][/B]
-optimized & upgraded framework & systemUI
-new 4.2 bootanimation
-new contacts & phone apk
-some bug fixes (Deskclock.apk, CusCamera.apk ......)
-no launcher apk included : recommend launchers are adwlauncher & hololauncher
-fastes framework build :)
[B][U]01.12.2012 | Motoluxe XT615 Jelly Bean 4.2 theme[/U][/B]
new mirror
repacked with adw.launcher...
2nd edit:
-fixed motoluxe-original-framework.zip download
[B][U]06.12.2012 | Motoluxe_XT615_BUILD_06.12.2012[/U][/B]
-added newer version of adw.launcher
-fixed bug in systemUI
-added screenshot mod
[B][U]07.12.2012 | Motoluxe_XT615_BUILD_07.12.2012[/U][/B]
-split mod: now screenshot mod is an stand alone update...
[B][U]08.12.2012 | Motoluxe_XT615_BUILD_07.12.2012[/U][/B]
-only a few changes @ additional instructions
[B][U]09.12.2012 | Motoluxe_XT615_BUILD_07.12.2012[/U][/B]
-added some colour skins & remakes from older versions of my mod
[B][U]11.12.2012 | Motoluxe_XT615_BUILD_07.12.2012[/U][/B]
-edit instructions for preparation & installation ...
[B][U]18.12.2012 | Motoluxe_XT615_Jelly_Bean_4.2_B13.12.2012[/U][/B]
-new instructions
-only works with [URL="http://forum.xda-developers.com/showthread.php?t=2036510"][ROM] Relentless ROM | v1.0 | Motorola Motoluxe XT615[/URL]
[B][U]19.12.2012 | New Temp CWM Recovery 6.0.2.3[/U][/B]
-new temp cwm recovery (find it at second post)
[B][U]22.12.2012 | MotoRoX ROM[/U][/B]
-new MotoRoX ROM released
[B][U]26.12.2012 | MotoRoX ROM[/U][/B]
-new version of Jelly Bean theme for use with MotoRoX ROM (second post)
-instructions updated
[B][U]14.01.2013 | *info* MotoRoX ROM[/U][/B]
-added to instructions & informations: This firmwares are "fully compatible" with MotoRoX ROM *confirmed*
-IRM-1670-0-4073, IRM-1540-0-4073 & IRM-167A-0-4053
[B][U]13.02.2013 | *update* for CWM Recovery to v6.0.2.8 [/U][/B]
-[URL="http://forum.xda-developers.com/showthread.php?t=2067510"]Temp Clockworkmod Recovery v6.0.2.8 for Motorola Motoluxe XT615[/URL]
.
..
...
never forget that it was much work for me to made this & I don´t want anything for it, maybe a click on "Thanks" if you like it
.....
....
...
..
.
Thanks to RAB and luxxx123 (the two developers of the Relentless ROM) because I used parts from there ROM for making my MotoRoX ROM.
...
..
.
additional colour skins & custom stuff !
...here are some colour skins & remakes from older versions of my Jelly Bean 4.2 theme mod...
1. red_statusbar_closer.zip - 426.60 KB
2. green_statusbar_closer.zip - 426.58 KB
3. enox-Motoluxe-JB-4.2-old-icons.zip - 2.90 MB
4. enox-Motoluxe-ics-theme-remake.zip - 2.91 MB
...optimzed Whatsapp background images: Whatsapp background images by enox
...my Wallpaper collection: Motoluxe XT615 Wallpaper collection
...if you like my work, don't forget to click on "Thanks"-Button
.
..
...
..
.
Enox, nice day, I have a problem when flashing the theme the cell, the cell starts to lock screen and starts pulling FC constantly flashie the cell returned to the retail firm Personal Argentina, di root permissions, went back to flash it through the cwm 6.0.14 and I get back the same, the firm that is using IRM-1590-0-2008-A06_BFM.zip, you have idea if it is compatible with your theme? I also had problems with the init.d optimizer I spent the other day, I put like you said, gave permission and the same, the cel die, I'd like to stick the German retail firm, but do not want to lose the 3G, in order always thank you very much
translate Google ;D
you have to flash IRM-1670-0-4073-A02_BFM_service.sbf with RSD lite not with cwm or other tools ...... its multilanguage etc you not lose 3g or anything else you just get a more stable and faster device .... and than you are able to flash my theme ... my theme only works with newest firmware = IRM-1670-0-4073-A02_BFM_service.sbf
Did all and get bootloop and bunch of "Force close" before it.....
enox.co said:
you have to flash IRM-1670-0-4073-A02_BFM_service.sbf with RSD lite not with cwm or other tools ...... its multilanguage etc you not lose 3g or anything else you just get a more stable and faster device .... and than you are able to flash my theme ... my theme only works with newest firmware = IRM-1670-0-4073-A02_BFM_service.sbf
Click to expand...
Click to collapse
ok, flash tonight IRM-1670-0-4073-A02_BFM_service.sbf and check the issue of 3G, the multilanguage not bother me, I use it in English and ready, thank you very much for the reply, ah! Enox, the issue of optimization that I spent with this retail firm should not start well? regards
crateres said:
ok, flash tonight IRM-1670-0-4073-A02_BFM_service.sbf and check the issue of 3G, the multilanguage not bother me, I use it in English and ready, thank you very much for the reply, ah! Enox, the issue of optimization that I spent with this retail firm should not start well? regards
Click to expand...
Click to collapse
the Jelly Bean theme & my init.d optimation pack is made for/with IRM-1670-0-4073-A02_BFM_service.sbf .... so if you have flashed this .sbf all things have to work...
enox.co said:
the Jelly Bean theme & my init.d optimation pack is made for/with IRM-1670-0-4073-A02_BFM_service.sbf .... so if you have flashed this .sbf all things have to work...
Click to expand...
Click to collapse
Okkk, thank you very much Enox many, but to lift after 3G, any little thing you commented on the night as I was
regards
Edit.. Enox, excuse me but does not work, I put the firm IRM-1670-0-4073-A02_BFM_service.sbf starts all good, then went to flash cwm 6.0.1.5 and JB-Theme-RC1-by-enox.zip, finishes it starts up lock screen and restarts automatically, so steadily, please help
crateres said:
Okkk, thank you very much Enox many, but to lift after 3G, any little thing you commented on the night as I was
regards
Edit.. Enox, excuse me but does not work, I put the firm IRM-1670-0-4073-A02_BFM_service.sbf starts all good, then went to flash cwm 6.0.1.5 and JB-Theme-RC1-by-enox.zip, finishes it starts up lock screen and restarts automatically, so steadily, please help
Click to expand...
Click to collapse
i uploaded a new version ... i hope it fix the problem .... but one thing... you write "then went to flash cwm 6.01.5 & JB-Theme-RC1-by-enox.zip" i hope you mean that you "start cwm 6.01.5 & flash JB-Theme-RC1-by-enox.zip with it ..... because cwm6.01.5 can´t be flashed its only a temp injection ...
Holo launcher lags alot! How can i fix it?
aleksandar_021 said:
Holo launcher lags alot! How can i fix it?
Click to expand...
Click to collapse
try holo-settings -> hold in memory X
I flash your german.sbf, install CWM, clear cache & dalvik cache in cwm, install theme RC 1.1, reboot. when phone starts every google process or apps from google dont work (force closes). Other apps works, but the phone is useless.
Working:
-phone.apk
-settings
-calculator
-fm radio
-and other apps i have installed before
Force close:
-google play
-gmail
-calendar
-message
-google gapps service
-google packageinstaller
-and other apps or services
-cant recognize my SD card
So whats wrong with this theme. Or what should i do to have fully functioning theme?
Edit: can i wipe data/factory reset in cwm?
Sorry for double post. But my phone wont turn on anymore. Stop at moto logo and reboots all the time. I flash your german rom twice and i have the same problem.. Any solution??
Edit: I finally wake up my phone and do the clean install of your .sbf. Install the theme again and have the same problem like before, force close for all google apps & services. So i decide to not use your theme anymore, sorry...
same here i followed all the steps you mentioned, i can't even pass the lock screen, it just freezes, and i made sure i'm using 1.1
---------- Post added at 04:57 AM ---------- Previous post was at 04:04 AM ----------
ok i was trying to restore my phone back to the way it was before applying the theme
i pushed VOL UP + VOL DOWN +POWER and proceeded to do a factory reset
the phone won't boot up it just stays in the motorola logo do this moto sounds and reboots in a never ending loop
i tried flashing the rom IRM-1670-0-4073-A02_BFM_service.sbf with rsd lite but its doing the same thing
Can anyone please point me in the right direction
Thanx
---------- Post added at 05:11 AM ---------- Previous post was at 04:57 AM ----------
i made a backup using CMW but can't to it because of the bootloop, please help :/
Sorry for the problems i will release a New Version in few days its a launcher Problem.... im working on it ... and don't forget im not a professional developer & i don't earn money with this
Sent from my XT615 using xda app-developers app
No problem dude, keep up the good work
By the way I've just flashed a different ROM with RSD Lite; and i got my phone back...
I'm eager to try your new version
Launcher can not affect malfunction of any application installed on the phone.
And on top of everything, it is not a deffault launcher. Custom launchers can work, or they cant work, but, stock launcher will handle everything just fine. So the problem persists in Framework, not SystemUI, not launcher, not anything else...
99.9999999% of disfunctions in Android OS is caused by corupted and / or not properly modified Framework-res.apk!
And if in that 0.0000001% the problem persist in the launcher, all that can happen is black screen with only statusbar visible, and nothing else.
You modified stock launcher, so it is custom now...Try to insert pure stock, and see what happens.
Anyways, i am sure that the problem is in framework-res.apk, and im sure that reboot is happening because of this:
For example:
You have statusbar.png status_bar.png and statusbar.9.png and you use JUST them for appearance of the statusbar.
Example 2:
I have statusbar.png status_bar.png statusbar.9.png AND STATUS_BAR.9.PNG
And im using 4 files, and you use 3 files for the appearance of the statusbar.
When i toss your framework with 3 files, into my system, as soon it boots, it will start searching for the missing 4th .png, but it wont find it.
Reboot and bootloop, and freeze at Motologo are results of that posted above.
Those filenames are just example, it could be anything in the drawable-hdpi folder
The solution could be that you post your drawable-hdpi folders. Both from framework and systemUI, and that users which want to use the teme, just delete folders from original .apks, and insert your drawable-hdpi folders inside those apks. And then, they use ADB to push files to right places...No bootloop, no freeze, no nothing.
Just, they will have stock white ListView backgrounds instead of your ICS/JB coloured backgrounds. And the TextView colors will be stock Black.
But the whole statusbar, menus, application headder, contact headers and all other files will be ICS/JB themed!
I know Enox, its ok. I will wait for new release.
Nope! Still bootloop...
When im having problem with my phone (reboots all the time) i flash it with IRM-167C-0-4036-A01_BFM (i found them in motoluxe tread). And then i flash again with Enox .sbf rom.
That works for me. You can try.
Related
CM7-GX4(EX+4G) has arrived...
CM7-GX4(EX+4G) || CM7-EX.l33t_edition ||
:CM7-EXv10:
GX4 = newest version
^_^
by MagnusRagnarokhttp://forum.xda-developers.com/member.php?u=2254999http://forum.xda-developers.com/member.php?u=2254999
New Build:
CM7-GX4(EX+4G)
This package contains:
-4g
-3 keyboards
-1 stock themed kb
-full theme
(by sunny sekshon)
-new adw themes
-ubuntu font
-new lwp
-anims pack
-magnusmods
-cm7 theme manager
INSTRUCTIONS:
COMING FROM v10 or l33t:
-FLASH ROM. Reboot.
-FLASH BATT MOD. Reboot.
-BOOT RECOVERY/wipe dalvic.
-FLASH WIMAX KERNEL
-REBOOT
or
COMING FROM SOMETHING ELSE AFTER A WIPE:
-FLASH ROM. Reboot.
-FLASH GAPPS. Reboot.
-FLASH BATT MOD. Reboot.
-BOOT RECOVERY/wipe dalvic.
-FLASH WIMAX KERNEL
-REBOOT
DOWNLOAD CM7-GX4
DOWNLOAD CM7-GX4 wimax kernel (A MUST)
DOWNLOAD CM7-GX4.BATTMOD
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Slightly Old Current Builds:
CM7-Ex.l33t
Cool l33t Battery Mod
This is an AOSP ROM based off of CyanogenMod CM7. This means that it does not, and never will have, HTC Sense. Or any other HTC Sense applications, including, but not limited to, HTC sync, diag mode via the dialer, and all that stuff that involves being branded by The Ma.. I mean HTC
Some new features:
-updated build info
-new battery mod
-keyboards
-completely themed
-quicker than v10
-packed with apps for the appaholic
....=....=....=....=....=....=....=....=....=....=........=....=....=....=....=....=....=....=....=....=....=....=....=....=....=....=....=....=....=....=........=....=....=....=....=....=....=....=....=....=
INSTALL INSTRUCTIONS for CM7EX_l33t:
Are you coming from CM7EXv10?
-if yes:
.........FLASH l33t ROM,reboot
.........FLASH BATTERY MOD,reboot. Easy-peasy.
if no:
........Nandroid your current setup, and backup your apps with appbrain or titanium
........Flash the 's_FORMAT_ALL.zip (attached), wipe data, cache, and dalvik-cache
........Flash rom (CM7EXv10)/reboot. Then boot into recovery
........Flash gapps/reboot. Then boot into recovery and do the "if yes".
*****Many of you have been having issues with the notification bar not appearing on the new ROM. I have found a viable issue for it.
If you haven't yet flashed the l33t version and are currently on v10, then it's easier for you. Install the attached adw ex launcher (if you don't have it already, google it/market buy it) and make sure notification bar is showing in the settings. Then follow the directions to install the l33t ROM.
If you are on l33t and don't have them, hopefully you have a nandroid for v10. If you do, restore backup and follow the instructions in the paragraph above. If not, wipe everything, flash v10, install adw ex, then do paragraph above's solution.*****
NOTE: If you NEED help with the ROM, just wanna talk about the ROM, or want to contribute to the ROM, go here, or join the chatroom. You can get to the chatroom by using a client like Xchat, Mirc, ect. If you dont have a client and want to use mibbit here is the link.
Server name -irc.demonirc.net #cm7ex
(The below is taken from the CM GB w/ Wimax thread, by Shinzul, because he got it perfect )
CREDIT:
-First of all, credit to team douche for the amazing ROM!
-JesusFreke, without your work this wouldn't be possible!!!! MANY THANKS
-MadCoder and Cyanogen for the initial Wimax commits
-toastcfh, you're the man - TEAMWIN 4 LIFE
And our army of AMAZING and patient testbots (in no particular order):
-onicrom
-SHlFT
-eyeballer
-vividboarder
-spiicytuna
-AssassinsLament
-xak944
-myndwire
-OtisFeelGood (mostly )
-kpoz
-Dees_Troy
-dkelle4
-joeykrim
(if I missed a tester, I apologize!)
--------------------------------------------------------------------------------------------------------------------------------------------
Older/Not brand new builds moved to post 3!!
thanks.
Thanks for getting the post up.
Less New/Previous (not inferior) Builds:
CM7-EXv10
Battery MOD - Cool Speedometer Look[/SIZE]
[/CENTER]
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
**Note that when you download the ROM, you have to change the name from "CM7-EX.v10.zip-signed" to "CM7-EX.v10.zip" In other words, remove the "-signed" from the end.**
Download Google Apps (GAPPS) HERE
[/FONT][/COLOR]
PLEASE NOTE: IF YOU FLASH GAPPS over everything else you WILL lose part of the theme!!!!!! if you DONT want to lose part of the theme flash in THIS order...
rom
gapps
rom
battery mod
If coming from a non-AOSP ROM, this is what I suggest doing:
1.) Nandroid your current setup, and backup your apps with appbrain or titanium
2.) Flash the 's_FORMAT_ALL.zip (attached), wipe data, cache, and dalvik-cache
3.) Flash rom/reboot. Then boot into recovery
4.) Flash mod/reboot. Then boot into recovery
5.) Flash gapps/reboot. Then boot into recovery
6.) Thank cm for source and lithid
Go HERE! for help!
THERE ARE MANY NEW PACKAGES AVAILABLE, such as: Themed Swype ( TWITTER AND CHATROOM USERS) and NON themed Swype for the XDA users.
Thanks to CM, Lithid thread, and many sleepless nights, I bring you CM7X (in many flavors), and not-so-nightly builds (found below)
Sooo do we need another GB? Prolly not. Did I? Of course. Is this just another GB ROM? Umm. NO ;D
Reasons why this build is different:
(cm7 sos builds aka nightlies aka magnus-not-so-nightlies
are unmodified source builds located below in the rom dl section)
-screen off animation-
-manup font-
[email protected] transition pack-
(awesome)
-white lock tabs -
-white rotary bar-
-themed stock gb keyboard-
-multiple theme options-
-gb super 100 battery mod-
(optional)
-cam and vid work-
(case you wondered)
-wifi works excellent-
-gps actually works for the first time i can remember-
-updates will be made according to cmsrc AND my ideas-
-more themes in the works-
-what else do you need? its just a phone-New Video Demo!!
Here is a video made by a fan of this ROM in action.
CM7-EX.v10 changelog
-----------------------
-Gps WORKS
-New super c battery with color fill gradient
-Theme engine
-Much faster speeds from Animation to animation screen
-THEMED swype for twitter guys, and the chatroom guys ( sorry XDA )
-New Lwp
-Newest cmsrc commits
-And then of course, a bunch of other nice little touch up's that you will just have to see when you Boot it up )
....And thanks amander for the Server for the downloads
....and thank LEUKAY for his work!
Hehe forgot to reserve post two...
So POST 3!!!
Add-ons, Mods, Themes, etc:
More coming soon, as old mods need to be updated!
Themes for Stock Swype HERE
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Like the screen off animation but not the others? Check this out!
FIXED HCmusic.apk
FIXED HCmusic.update.zip
Finally! Hoping GPS works this time around.
any idea on when 4G will work??
is this flashed the same as the one a before and i also assume the gaps are already compiled into the rom correct?
djnarcotics said:
is this flashed the same as the one a before and i also assume the gaps are already compiled into the rom correct?
Click to expand...
Click to collapse
Directions added.
Biofall said:
Directions added.
Click to expand...
Click to collapse
another quick ? will the files be changed since we are essentially renaming the zip (ex.BATTERY_GB.v10.zip-signed) and it gets changed to BATTERY_GB.v10-signed.zip as that i am aware i would not be able to flash with out it being a .zip file ?
Edit: NVM You Beat me to it
This ROM is beautiful. The screen off animation makes me jizz my pants.
Vulf said:
This ROM is beautiful. The screen off animation makes me jizz my pants.
Click to expand...
Click to collapse
You might want to see someone about that.
Cant wait for 4G to be added!
If I'm coming from v9 do I need to wipe anything? I'm currently get nonstop com.android.phone force closes. Any ideas?
Gps still doesnt work when you are moving with v10
i would say to do the full wipe. Can neone help me with changing the speed of the LED flash for SMS messages? Handcent has this feature built in but it doesnt work on this ROM for some reason. Ne ideas?
GPS not working (UPDATE: GPS works)
ffyter said:
Gps still doesnt work when you are moving with v10
Click to expand...
Click to collapse
Yah, no go for me with GPS as well. The funny thing is, when I first installed Ex10 gps worked! I was so happy. Played with it all night. Then latter in the day (today) after I got things all setup gps stopped working..... I flashed like 5 times trying to get it to work again, no dice.
UPDATE: My GPS now works because of this:
You will need:
1. A 'sense' ROM currently running on your phone (I had Fresh 3.5.1)
2. MSL reader installed (get it from the market)
2. Have CM7 (build 17 worked for me) and the latest gapps (I used the ones from 2011-01-15) downloaded to your SD card
Steps:
1. Open MSL reader and get your MSL (jot it down)
2. Launch phone dialer and dial ##GPSCLRX#
3. It will ask you for your MSL, enter it.
4. Upon hitting OK, your phone will just say reboot in 10 secs, let it reboot.
Phew!
5. After it has rebooted, boot to recovery (i used clockworkmod 2.6.0.1)
6. Nandroid backup (if you are so inclined)
7. Wipe cache, Dalvik and then wipe data/factory reset
4. Flash CM7 b17 from your sd-card
9. Flash gapps
10. Reboot and walk through set-up. Your gapps will be downloaded from the market. Wait for all the downloads to complete.
11. Use GPS as normal and enjoy the GPS goodness!
Please note I did not write this, I'm just helpN to spread the goods!
Sent from my PC36100 using XDA App
Him hit a boot loop I guess. Flashed rom, reboot, loads then reboot into recovery, flash mod (VVM, HTC music) and now cyanogen (mod) keeps glashing on my screen. Any ideas what I did wrong?
Sorry guys. The all in one zip at the bottom of post three isn't compatible, just found out.. sorry for any trouble this caused you guys. Ragnarok is working on it.
To fix the bootloops, do a battery pull or hold volume up + volume down + power until reboot, then boot into bootloader by holding down volume down. Navigate to recovery and re-flash the ROM.
Biofall said:
Sorry guys. The all in one zip at the bottom of post three isn't compatible, just found out.. sorry for any trouble this caused you guys. Ragnarok is working on it.
To fix the bootloops, do a battery pull or hold volume up + volume down + power until reboot, then boot into bootloader by holding down volume down. Navigate to recovery and re-flash the ROM.
Click to expand...
Click to collapse
Yea the battery mod keeps kicking out an error at UOT as well. I tried to lad it earler and kept getting bootloops as well. OH well will wait for a fix
After flashing this ROM, I flashed the Gapps. Rebooted and now I'm stock where it says "touch the android to begin". I did it and nothing happens...
Well wiping fixed my problem with com.android.phone crashing. Everything is running well except Pocket Legends still doesn't work.
Sent from my PC36100 using XDA App
will the v9Tmod.BATT+v2.2.11.zip work ok for V10 ?
Also, does that format all zip format the sd card too ?
Latest versions: GB H1N1v1.0 (in 2nd post) / ICS H1N1v5.8a (updated: 2013.04.16)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ICS H1N1v5.8a ROM released (Andorid 4.0.4 with Aroma™ installer*)
*if you updated your phone to ICS with OTU, you have ICS bootloader, follow Aroma™ installer instructions
Code:
[LIST]
[*][B]Changelog:[/B]
[B]- [/B]Aroma installer
- BASE ROM: Android 4.0.4 build:175
(T-mobile HUN, 2012.12.15 update - same as 2013.01 FR)
- Trebuchet instead JRD launcher
- time server set to EU (instead asian...)
- deodexed apk's, fixed mms.apk
- res.apk files merged
- recompiled system apps
- removed unnecessary apps
- updated google play, gmail
- removed stuffs from startscreen
- camera bitrate higher, save 100% quality JPEGs
- camera use mp4 container instead 3gp, 8Mbit
- removed unnecessary lib files
- symlinked files fixed
- prerooted, added busybox
[/LIST]
[LIST]
[*][B]Build.prop mods:
-[/B] disabled error logging
- proximity sensor fix (black screen when call)
[/LIST]
[LIST]
[*][B]Kernel:[/B]
[B]- [/B]new 995S kernel
- 382MB available RAM for system
- CPU OC up to 1.95GHz (at your own risk!)
- GPU OC up to 320MHz (at your own risk!)
- undervoltage
- [SIZE=3]governors: SmartassV2,Interactive,InteractiveX,Intellidemand,Ondemandx,Lulzactive[/SIZE]
- new I/O scheduler: Deadline
- unlocked bootloader (for ICS/GB)
[/LIST]
Known bugs:
- If you OC'd yor CPU, "restore factory settings" from menu can't working (only button HR - long power+volumeUp) If you want to use that function, revert to 1,4GHz with ondemand governor than reboot phone.
Installation instructions1., Download ICS H1N1v5.8a ROM file
2., Copy ICS_H1N1v5.8a.zip to SDcard
3., Download CWM_ICS package (if you have ICS bootloader) or this CWM_GB package (if you have GB bootloader), extract it then turn on phone in fastboot mode - power on+volume down + connect USB cable to phone and run "fastboot load.bat"
4., MAKE BACKUP if needed, all partitions will be wiped. (excl. SD card)
5., Install zip from sd card menu then select ICS_H1N1v5.8a.zip and follow instructions
Recommendations- I personally recommend to use Seeder (latest apk 2.0 ATM)
!!!HOTFIX!!!- none ATM
All credits to bagyusz and Heimdallr75 from Prohardver!
If you don't like ICS, because of bad camera or other, downgrade is available!
GB H1N1v1.0 ROM released (Android 2.3.6 with Aroma™ installer*)
*if you updated your phone to ICS with OTU, you have ICS bootloader, follow Aroma™ installer instructions
Code:
[LIST]
[*][B]Changelog:[/B]
[B]- [/B]Aroma installer
- BASE ROM: Android 2.3.6 v61L
(T-mobile HUN, latest 2.3 update)
- res.apk files merged
- CPU OC from menu
- CRT animations
- removed unnecessary apps, scripts
- updated google play, gmail, youtube
- new media sounds added
- removed stuffs from startscreen
- camera bitrate higher, save 100% quality JPEGs, h264/mp4 tweaks
- prerooted, added busybox
- added seeder
[/LIST]
[LIST]
[*][B]Build.prop mods:
-[/B] disabled error logging
- proximity sensor fix (black screen when call)
- add energy saving
- disabled ring delay
[/LIST]
[LIST]
[*][B]Kernel:[/B]
- 380MB RAM for system
- IO tweaks
- deadline governor
- overclock up to 1.95Ghz (at your own risk!)
- undervoltage
- able to work with ICS bootloader for DOWNGRADE :good:
[/LIST]
Known bugs:
- If you OC'd yor CPU, "restore factory settings" from menu can't working (only button HR - long power+volumeUp) If you want to use that function, revert to 1,4GHz with ondemand governor than reboot phone.
- Need to select default keyboard at first start
Installation instructions1., Download GB H1N1v1.0 ROM file
2., Copy 2.3.6_H1N1v1.0.zip to SDcard
3., Download this CWM_ICS package (if you have ICS bootloader) or this CWM_GB package (if you have GB bootloader), extract it then turn on phone in fastboot mode - power on+volume down + connect USB cable to phone and run "fastboot load.bat"
4., MAKE BACKUP if needed, all partitions will be wiped. (excl. SD card)
5., Install zip from sd card menu then select 2.3.6_H1N1v1.0.zip and follow instructions
Recommendations- If ROM cant boot after installation or stop at bootlogo, double check your actual bootloader then select correct
- If animations are "lagging", disable it from menu (settings/screen settings/animations)
!!!HOTFIX!!!- nothing at the moment
All credits to bagyusz and Heimdallr75 from Prohardver!
If you able, support the developers. :good:
Re: [ROM][OT-995][2.3/4.x] H1N1 ROM (from bagyusz&Heimdallr75)
Kudos guys. I don't like Alcatel firmware cause I always have issues with it, but YOU guys are frigging great. I'm using mrcheeses tweaked version of your rom at the moment. Its great. Keep up the good work. I think for most users you guys are needed. :thumbup:
Sent from my ALCATEL_one_touch_995 using xda premium
Re: [ROM][OT-995][2.3/4.x] H1N1 ROM (from bagyusz&Heimdallr75)
Best from at this moment for this phone.thank you Hungary
Sent from my ALCATEL_one_touch_995 using xda app-developers app
Thanks a lot, now using mistercheese version it's just the perfect rom for me thanks again
It's really great rom, thanks for all.
Update
Hello all!
H1N1ICS v5.3 full installer
Updated Changelog:
-Fixed launcher
-ICS icon pack installed
-Flash menu is also available for recovery
-Recovery can be installed in the appropriate bootloader when selecting
-Before installation, the installer flavor was doing a full wipe, so do not have to do it manually
-Fixed GPS
Re: [ROM][OT-995][2.3/4.x] H1N1 ROM (from bagyusz&Heimdallr75)
Launcher is not fixed.there is a problem.some pic is showing during drawer transition.
Sent from my ALCATEL_one_touch_995 using xda app-developers app
ICS H1N1v5.3?
5.2 is OK with fix.
Re: [ROM][OT-995][2.3/4.x] H1N1 ROM (from bagyusz&Heimdallr75)
Hello Comicmav.
Sent from my ALCATEL_one_touch_995 using xda premium
I have recently installed the GB H1N1 v0.9 Rom and i realized that it is consume the battery very fast. For example in 7 hours without any use, the phone is all this period in deep sleep, hat the battery 20% decreased. Is this normal with GB or could i anything make for longer lasting battery?
Also wifi tethering seems not to work so good... i get no internet connection in my Laptop, when i use the OT-995, but it works good when i use an other mobile phone.
Thanks!!
i will always prefer a 5.3 instead of a 5.2+fix
V5.3 is nice guys.. if i can help or assist u with anything just let me know
btw if hot boot in reboot menu doesnt work u need to symlink pkill to busybox
i'm just curious... icons are alcatel's or you changed it?
currently i'm on pac rom and i'm satisfied with it but all the nice feedback for H1N1 V5 tempts me to flash it
Greetings,
Comicmav said:
Hello all!
H1N1ICS v5.3 full installer
Updated Changelog:
-Fixed launcher
-ICS icon pack installed
-Flash menu is also available for recovery
-Recovery can be installed in the appropriate bootloader when selecting
-Before installation, the installer flavor was doing a full wipe, so do not have to do it manually
-Fixed GPS
Click to expand...
Click to collapse
is this an official release from the H1N1 group?
Just can't seem to flash it correctly I used the CWM provided in the OP post and also tried touch cwm and 6.0 but every time it keeps stuck at the splash screen. Doesn't matter which Bootloader/batter/animation/(the video improvment thingy) i try...
Hylix said:
Just can't seem to flash it correctly I used the CWM provided in the OP post and also tried touch cwm and 6.0 but every time it keeps stuck at the splash screen. Doesn't matter which Bootloader/batter/animation/(the video improvment thingy) i try...
Click to expand...
Click to collapse
My CWM and the 5504 one should work with this ROM.
i've installed it with my linked /custpack touch version and it worked fine.
It may very well be a hickup on the cache, have you wiped everything before installing? I have absolutely no idea why it would matter but for some reason /cache is messing with installation scripts based on Aroma. Now the need for an Aroma installer is not there for me so i just wiped it out and used the updater to install it without wiping data.
Jinxxed said:
My CWM and the 5504 one should work with this ROM.
i've installed it with my linked /custpack touch version and it worked fine.
It may very well be a hickup on the cache, have you wiped everything before installing? I have absolutely no idea why it would matter but for some reason /cache is messing with installation scripts based on Aroma. Now the need for an Aroma installer is not there for me so i just wiped it out and used the updater to install it without wiping data.
Click to expand...
Click to collapse
I wiped everything. Also it seemed that my GPU overheated on the PAC rom so I wanted to go back to a ICS rom just incase.
However it seems like I can't flash a ICS rom. Older version of H1N1 don't seem to work and the ICS+ from mistercheese also fails to boot....
(PAC still boots flashes)
Also after some inspection it seems like the Aroma installer takes a bit long on the Boot Partition or something.
Hylix said:
I wiped everything. Also it seemed that my GPU overheated on the PAC rom so I wanted to go back to a ICS rom just incase.
However it seems like I can't flash a ICS rom. Older version of H1N1 don't seem to work and the ICS+ from mistercheese also fails to boot....
(PAC still boots flashes)
Also after some inspection it seems like the Aroma installer takes a bit long on the Boot Partition or something.
Click to expand...
Click to collapse
I'd restore that one before i attempted a new install, just use OTU to restore it to factory and then fastboot flash recovery cwm-yaydyaydyd.img and flash the ROM from there.
You can also try to flash the boot.img with fastboot or just boot the boot.img with fastboot boot yayayay.img
You didn't dd anything after i told you i successfully used dd, did you? because that may be the cause and you really shouldn't do that.
Actually, never dd anything EVER unless it's in my multiboot script or i'm asking you to do it.
GThrill ROM for JIAYU G3
The latest version GThrill ROM is based on "CM10" rom from needrom.com. I have applied some tweaks, removed some apps, added some and added option for the selection of EN (ph, us) language. The original purpose was for personal use, but I thought to share it, in case anyone wants to try.
DISCLAIMER
I SHALL NOT BE HELD LIABLE FOR ANYTHING THAT MAY HAPPEN.
SOME IMAGES/LOGOS/FILES/TWEAKS ARE NOT MY CREATION. THEY ARE OWNED AND CREATED BY THEIR RESPECTIVE OWNERS AND CREATORS.
THERE'S NO INTENTION WHATSOEVER TO INFRINGE ANY I.P. RIGHTS.
IF YOU FIND ANYTHING IN THIS POST THAT SHOULD NOT BE HERE, PLEASE LET ME KNOW. I'LL BE HAPPY TO DELETE THEM IF DEEMED VALID.
LIKEWISE, IF YOU FEEL THAT YOUR NAME NEED TO BE MENTIONED HERE, DO LET ME KNOW AS WELL, AND I'LL BE HONORED TO ADD IT.
USE AT YOUR OWN RISK!
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Boot Splash/Logo and Boot Animation Video
- http://www.youtube.com/watch?v=T2d3PgAarA0
NOTES
This thread assumes that your JIAYU G3 is rooted and have a working recovery (CWMR/TWRP).
If your phone is not rooted, b1nary's rooting method works with G3, provided that you have working ADB driver and installed for for it.
Here's the link to b1nary's rooting method: Root MANY ANDROID!
Click to expand...
Click to collapse
GThrill Version 3.0
Features
- based "CM10" which I got from needrom.com post
- Jellybean 4.1.2
- system/framework zipaligned
- init.d support
- zipalign on the fly (script by Wes Garner)
- slim and light: removed unwanted apps
- host file (to block known ad servers/hosts)
- some build.prop tweaks from different sources
- contains some line from V6 supercharger script (by zeppelinrox, particularly kernel tweaks)
- Jellybean Keyboard (SWIPE feature)
- Google Chrome browser (bundled stock browser FCs)
- Language: English and Chinese (some other language can be selected from Settings but i'm not sure if they are completely translated)
Download
- http://d-h.st/xzo
Click to expand...
Click to collapse
GThrill Version 2.1
Features
- version 2.1 is just a maintenance release. it's basically the same as v2.0 with fix to reported Google Chrome issue
- if you are already using GThrill v2.0, no need to upgrade to 2.1, just install the fix for Google Chrome issue
Download
- http://d-h.st/huR
Click to expand...
Click to collapse
GThrill Version 2.0
Features
- based on LEWAOS for JIAYU G3 22.Feb release (http://bbs.lewaos.com)
- Jellybean 4.1.2
- system/framework zipaligned
- init.d support
- zipalign on the fly (script by Wes Garner)
- slim and light: removed unwanted apps (i.e. virus scanner, etc.)
- host file (to block known ad servers/hosts)
- some build.prop tweaks from different sources
- contains some line from V6 supercharger script (by zeppelinrox, particularly kernel tweaks)
- Jellybean Keyboard (SWIPE feature)
- Google Chrome browser (replaced chinese browser)
- Google splash logo, NEXUS Jellybean bootanimation
- Language: English (default), Chinese
Download
- http://d-h.st/JK2
Google Chrome Problem
- A reported problem when launching Google Chrome has been verified
- Here's the fix: http://d-h.st/AYQ
- This fix is to be applied via CWM/TWRP
Click to expand...
Click to collapse
Flashing instructions
As a safety precaution, always make a backup before flashing
1) Download the zip file and put in SD card
2) Boot to recovery mode (CWM, TWRP or Lewa Rec)
3) Flash the zip file you (from #1)
4) (optional, but highly recommended!) Do a factory reset
5) Reboot
6) Once you see the lock screen on first boot after the update, let it set for 1min (to fully settle the update)
7) Unlock and setup things (esp. if you did factory reset)
8) Restart
Click to expand...
Click to collapse
ClockWorkMod Recovery / TeamWin Recovery Project / LewaRec
CWM Recovery 6.0.1.5 for JIAYU G3
- I ported it from Acer Gallant E350 by erlucky to JIAYU G3
- USB mount and adb works
- unlike Lewa Recovery, this creates backup of boot and recovery images
Download
- CWMR_6.0.1.5_JiayuG3 (by ng0tkul4).zip
How to Update
- option 1: Flash via CWMR/TWRP
- option 2: for rooted phone without TWRP/CWMR, you can extract .img file from the zip file, and dd it to /dev/recovery
-
Click to expand...
Click to collapse
Lewa Recovery 2.0 for JIAYU G3
- English verion (translated/converted/moded by me)
- USB mount and adb works
- Original post: LeWa Recovery 2.0 English version
Download
- LewaRecovery2.0 (ENtranslated_by_ng0tkul4).zip
How to Update
- option 1: Flash via CWMR/TWRP
- option 2: for rooted phone without TWRP/CWMR, you can extract .img file from the zip file, and dd it to /dev/recovery
-
Click to expand...
Click to collapse
Boot/Splash Logos for JIAYU G3
DISCLAIMER
Logos, images and trademarks are copyright of their respective owners.
I take no credits for any of these. For personal use only. I just packaged them
as installable boot/splash logos for our G3! Use at your own risk.
Lamborghini
- download
- screenshot
The Punisher (1)
- download
- screenshot
The Punisher (2)
- download
- screenshot
White Google
- download
- screenshot
Colored Google
- download
- screenshot
If you want to go back to original JIAYU stock logo, here's stock boot logo
How to install
- Flash via CWM/TWRP recovery
Click to expand...
Click to collapse
Fonts for JIAYU G3
Each (flashable) zip file contains text file license specific to the font it carries, except for RoseMary and Storopia
(feel free to PM if you feel that those need not be included here). I was not ablt to take screenshots before I let go
of my G3, but I've tested all these fonts with G3
!PaulMal
ActionMan
Amaranth
Arimo
CabinSketch
Diavlo
Exo
Gapstown
Komika
Laconic
LuxiSans
Orbitron
SourceSans Pro
Ubuntu
VeggieBurger
RoseMary
Storopia
How to install
- Flash via CWM/TWRP recovery
Click to expand...
Click to collapse
Credits
Other credits/Special Thanks:
- LewaOS for the LewaOS and Lewa Recovery
- clockworkmod for the CWMR
- TeamWIN for the TWRP (Lewa Recovery)
- erlucky for CWMR 6.0.1.5 for Acer E350
- b1nary for his rooting method that works with G3
- ankadnikov/kadan for his LogoBuilder for MTK phones
- bgcngm/Bruno Martins for his MTK unpack/repack scripts
Click to expand...
Click to collapse
First of all tkank you for the development of this awsome rom. I don´t know if what I´m asking is possible, but why don´t you contact JDStar, who has developed another multilanguage lewa rom and ask him for permissions to add the tranaslations to your rom? This is the link to his rom:
http://forum.xda-developers.com/showthread.php?t=2162425
hugoglezp said:
First of all tkank you for the development of this awsome rom. I don´t know if what I´m asking is possible, but why don´t you contact JDStar, who has developed another multilanguage lewa rom and ask him for permissions to add the tranaslations to your rom? This is the link to his rom:
http://forum.xda-developers.com/showthread.php?t=2162425
Click to expand...
Click to collapse
Thanks for bringing this up. Will try to contact him when i get the time... or he can use this as the base.
Nice work bro, keeping our G3 updated :highfive:
added flashable logos
coming up shortly... fonts.
JDStar, has shared some translations for lewa rom 4.1, It would be great if you could make also flashable zips to add some languages. Here´s the link http://androidtranslator.etomaszow.eu/ . Thank you for your efforts and please keep up the good work!!! :good:
splash logo
First of all Thanks for the Roman. Can I know how to flash back the original jiayu splash logo. I would like to have jiayu logo. Thanks
kvpaul said:
First of all Thanks for the Roman. Can I know how to flash back the original jiayu splash logo. I would like to have jiayu logo. Thanks
Click to expand...
Click to collapse
i have uploaded the original/stock JIAYU splash logo
just flashed the Lewa Gthrill, tnx newbie
- LED indicator ok, BTW I noticed that ICS version has 3 Color indicator R-G-B
- wifi/ data/ GPS is ok
- nice music player w/ artist & lyrics (internet needed)
- stock lockscreen not sensitive, must touch a few times, changed to pattern seems ok
- Theme chooser always FC
- some apps, wechat, chikka, text. sometimes suddenly just close
- still testing the batt. life
- so far so good
with Nova Launcher
Netflix App
Thanks for uploading the stock splash logo. I like this rom, but what I am looking is to run netflix app. Netflix will work on ics but in none of the JB roms. Do you know how to make running the netflix app.?
Thanks
CMW recovery flashed but no go
Hi there,
I tried to get into the newly flashed CWMR but somehow I've failed. What I've done is use mobileuncle tools to get into CWM 5 and from there flash the zipfile I've downloaded from the sources. Now the CWM app does boot into recovery but I get this little android figure with a ! from it's belly. Not good I suppose.
I'd realy like to try out this rom but without working recovery I'm a bit scared I'm going to brick the thing....
Could you please advise??
Greetings,
Andreas
i use gthrill for a couple of days and the only problem i have is that when i open the wifi after some time the signal in one of my two sim drop....
i have it in all roms i try...
Installed last night.
Looks nice, work fine, stable. Well done
I have only one issue.
USB won't work.
When Jiayu is connected to PC, USB storage is not recognised. Any solution for this?
andreasheijdendael said:
Hi there,
I tried to get into the newly flashed CWMR but somehow I've failed. What I've done is use mobileuncle tools to get into CWM 5 and from there flash the zipfile I've downloaded from the sources. Now the CWM app does boot into recovery but I get this little android figure with a ! from it's belly. Not good I suppose.
I'd realy like to try out this rom but without working recovery I'm a bit scared I'm going to brick the thing....
Could you please advise??
Greetings,
Andreas
Click to expand...
Click to collapse
boot into normal Android and run MTKTools again and flash CWMR... this time, do it three (3) times in a row, before rebooting.
Hamacio said:
Installed last night.
Looks nice, work fine, stable. Well done
I have only one issue.
USB won't work.
When Jiayu is connected to PC, USB storage is not recognised. Any solution for this?
Click to expand...
Click to collapse
i'm not sure, may be you need correct drivers installed to your pc.
try using different USB port of your PC
ng0tkul4 said:
i'm not sure, may be you need correct drivers installed to your pc.
try using different USB port of your PC
Click to expand...
Click to collapse
Drivers are ok. Tried every single port. Worked fine 2 days ago - Jiayu was with ICS 4.0.4.
Not recognised as a mass storage.
dd rules!
ng0tkul4 said:
boot into normal Android and run MTKTools again and flash CWMR... this time, do it three (3) times in a row, before rebooting.
Click to expand...
Click to collapse
Didn't work. Got it working using the dd method (way easier if you ask me ).
Now, I've installed CWM 5.5.0.4 in /dev/recovery but when trying to flash the zip file for the LewaOS rom it gives me 'cannot open file'. Is that because I need the newer version of CWM mentioned in the opening post? Or just something else? Perhaps because there's 'spaces' in the filename? I'll let you know if I find something out there !
** Update **
I downloaded the correct rom but still no go It just doesn't want to install the rom...
Hamacio said:
Drivers are ok. Tried every single port. Worked fine 2 days ago - Jiayu was with ICS 4.0.4.
Not recognised as a mass storage.
Click to expand...
Click to collapse
Hi
Reflashed again.
Everything is fine.
I think is slower than original ICS 4.0.4 ROM, but stable and good.
Keep up good work!
***Update:***
Battery life much improved, at least 15-20%
I found this ROM very good so far.
There's only small issue with some mobile web sites. Some of the links cannot be open.
I've installed Opera browser in addition but is exactly the same so
I'm not sure: maybe there is a problem in ROM or badly written mobile web sites.
Thanks a lot
AVD Rom Based Stock 11.2.A.0.31
Code:
[B][U]Disclaimer [/U][/B]
Everything on XDA Developers is tried by your own choice and own free will.
We are not responsible in the unlikely case your device gets bricked damaged.
Or in the very unlikely case your device turns into a deceptacon
and takes over the world.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please Do Not Mirror Any Of Our Files
Here I present AVD Rom which is stock based. packed with extra features and tweaks. It is all most lag free fast & fluid ui. AVD Is Now A Dark Moon Team Project I hope you all enjoy what sony should have given us If any of you can't post on the thread then please post here: http://forum.xda-developers.com/showthread.php?p=46225513#post46225513 and me or one of the senior members will answer please do not pm me.
Features:
- PreRooted
- Completely Deodexed
- All apks zipaligned
- BusyBox PreInstalled
- 100% SuperCharged
- init.d Support (run your favorite shell scripts on stock kernel)
- ext_card Mounted As sdcard
- Removed some Un Needed apps
- New Lockscreen
- New conversations
- New Honami Framework
- New boot animation - AVD Customed
- Xperia V Keyboard
- New Album & Movies
- Xperia Z wallpapers
- Xperia Z Ultra Walkman
- Small Apps
- Flashgordon app flash zips without a recovery Used At Your Own Risk!
- semcnotes.apk
- New Calculator
-New Honami Home Launcher
-DoCoMo System Ui
Plus much more.
Screen Shots
Locked Bootloader Installation Instructios
I recomend staring on rooted .31 firmware. Make a nandroid backup before you do anything
1a) download rom zip & ftf file place rom zip on the root of sdcard not in a folder.
2)Download & install CWM from here http://forum.xda-developers.com/showthread.php?t=2333078 the jb kernel to reflash is .21 FW just flash my kernel ftf.
3) Boot into CWM wipedata/factory reset wipe cache partition Navigate to Advanced wipe Dalvik cache
4) Next navigate to mounts & storage format/system (ONLY SYSTEM)
5) Next go to install zip from sdcard. Then Choose zip from sdcard. Find my AVD Rom V1.x.zip install.
6) When Installation has finished navigate back to advanced and choose fix permitions
7) After that take the battery out for at least 10 seconds[/COLOR] (NOOB'S DO NOT LET THE PHONE BOOT UP AS THE ICS KERNEL IS STILL INSTALLED YOU WILL GET A BRICK)
7) Take out battery Flash my kernel ftf or you can use vengeance kernel.
8) Open flashtool drag my Stock Kernel ftf file you downloaded into the flashtool window when files have finished preparing connect phone in flashmode (hold vol- key while connecting usb) when its finished flashing reboot. Enjoy.
Click to expand...
Click to collapse
Unlocked Bootloader Installation Instructions
1) Download rom zip, ftf & Addon if you want it. place Rom & Addon zip on externel sdcard
2) Fastboot CM10 kernel for CWM. Boot into CWM
3) Wipe data/factory reset, wipe cache partiton, go to advanced wipe dalvik cache. then go to mounts & storage format system.
4) Go to install zip from sdcard choose zip from externel sdcard. flash rom.
5) when installation is finished go back to advanced choose fix permissions.
6) Next take out battery open flashtool & flash my kernel ftf
7) Reboot device. Enjoy
Click to expand...
Click to collapse
Addon Installation Instructions
1) Boot to CWM by the instructions for you bootloader status in first instrutions
2) Wipe cache partition & dalvik cache.
3) install zip from sdcard choose the addon you downloaded
4) After it has finished take out battery & flash kernel ftf then reboot.
Click to expand...
Click to collapse
Locked Bootloader Update Instructions
Install CWM as before in first installation wipe cache partition go to advanced wipe dalvik cache install rom reflash a jb kernel reboot. All done
Click to expand...
Click to collapse
Unlocked Bootloader Update Instructions
Download latest rom Flash CM10 kernel boot into CWM wipe cache partition go to advanced wipe dalvik cache then flash rom. after install has finished reflash stock kernel ftf or vengeance kernel reboot. All done
Click to expand...
Click to collapse
AVD Bug Fix Instructions
1) Download the fix AVD 1.6V zip from atachments
2) Extract/unpack the zip to your sdcard
3) With you favorite root browser push systemui.apk to /system/app give permissions rw-r-r
4) push framework.jar to system/framework give permissions rw-r-r
And your all done.
Click to expand...
Click to collapse
Downloads:
AVD Rom Latest Release: https://mega.co.nz/#!OhYmVQLb!D4Qt1Hy9gsEgfiFbIKfDeiUWW78RIo-oNTonuCssWHk
Latest Release Mirror: http://www.4shared.com/zip/49nmRBKa/AVD_RomV16.html
Addon Archive: http://www.mediafire.com/folder/23macj2g9sx60/AVD_Addons
Rom Archive: https://mega.co.nz/#F!elpjCTiT!GewDfirKrGIzwUjXO3Gt-g
Kernel ftf: https://mega.co.nz/#!KlZlSLBI!InCg31egMl8AkW2MwiQkxhkyuN9yAmlJVuTtNt1tWgM
Kernel ftf mirror: http://www.4shared.com/file/MLr0lK-k/st26i_112A031_Kernel_By_Gavste.html
Click to expand...
Click to collapse
Why Not Put One Of My AVD Banners In Your Signature
Code:
[B]Changelog:[/B]
V1.6
-Added honami framework (addon to be flashed)
-Added honami home
-Added honami themes
-Added honami system ui
-Added honami skech app
V1.5a
-Removed build prop tweaks (interfered with walkman audio)
-Walkman fixed
-Small apps fixed
-Added X-Reality (only active in album & movies)
V1.5
-Added xperia z ultra walkman
-Added new semcclock app
-Added Xperia i1 widgets
-Added Small Apps (waiting for Aeron Sagar to release system ui)
-Added new init.d scripts for performance
-Added supercharged init.rc
-Added Build prop tweaks
V1.4
-Updated framework to 2013
-slightly modded bootanimation for AVD
-Call dialer bug fixed
-New phone book (white)
-New Phone dialer (white)
-Added sony screen mirror app
-Removed R3al Launcher
-Added Aeron Sagar's Home.apk
-Removed more bloatware
-More performance tweaks
-Added 2 more shell scripts to improve performance & Stability
[COLOR="red"]Rom Is Even More Stable[/COLOR]
V1.3
-Completely rebuilt
-Xloud Fixed
-Vpt Fixed (sound enhancement bug)
-Removed More Bloatware rom is lighter
V1.2
- Album Fix
- New semc clock app
- Updated bootanimation to fit screen
- Added Xperia Link
- Added some new stock wallpapers
V1.1-
- Walkman Fix
V1.0-
-Initial Release
CREDITS-
@Aeron sagar for the use of his amazing mods thankyou my friend
@zeppelinrox for Awesome V6 SuperCharger. Original Thread: http://forum.xda-developers.com/showthread.php?p=16635544#post16635544
@androguy.fr for flashgordon
@TeamMex for sd remount tutorial
@neroyoung for tweaks
@Mata_Ratos for testing and feed back.
@saif1012 for system ui png fix
Bugs:
-Mobile data toggle does not work in notifacation draw or on power widget
-Setting up wifi in setup wizard force closes setup wizard
-Uninstalling an app shows android.acore error (does not affect anything)
-No voice typing on xperia keyboard
Click to expand...
Click to collapse
Some pics would be nice
gavster26 said:
Y U Quote Whole OP
Click to expand...
Click to collapse
The rom size only 15.6mb??
haizanlhkt said:
The rom size only 15.6mb??
Click to expand...
Click to collapse
My appologys bro all fixed
Is it a full working rom? What is better comparing to the stock one?
I'm tired to downgrade to ICS...
I can flash this even if my bootloader is locked - right ?
rexxxxx said:
I can flash this even if my bootloader is locked - right ?
Click to expand...
Click to collapse
yes its modified stock for stock kernel
Eduardo C. said:
Is it a full working rom? What is better comparing to the stock one?
I'm tired to downgrade to ICS...
Click to expand...
Click to collapse
its alot faster and more responsive and smooth
Whoohooo, first time my name appears on a ROM development!!!
But I've got to say it's really a great rom, and for the first time I'm not sad about not beeing able to unlock my bootloader. Can wait a couple more years until someone figures that one out.
Great job gavster26.
gavster26 said:
AVD Rom Based Stock 11.2.A.0.31
Click to expand...
Click to collapse
Good job bro,
This is what I have been waiting for. Downloading it as we speak.
Hope I can do the downgrade to ICS in order to give this ROM a try.
hmmm..
gavster26 said:
Y U Quote Whole OP
Click to expand...
Click to collapse
I'll prefer to stay using this rom -->> http://forum.xda-developers.com/showthread.php?t=2304025
because the antutu score is better -->> https://www.dropbox.com/sh/lngu0oqlzidv13f/A7O2lH7SHC :good:
zona77 said:
I'll prefer to stay using this rom -->> http://forum.xda-developers.com/showthread.php?t=2304025
because the antutu score is better -->> https://www.dropbox.com/sh/lngu0oqlzidv13f/A7O2lH7SHC :good:
Click to expand...
Click to collapse
Thats mine aswel lol. The reason that scores a little higher is because it is odexed and this one is deodexed
gavster26 said:
Thats mine aswel lol. The reason that scores a little higher is because it is odexed and this one is deodexed
Click to expand...
Click to collapse
Hahahaha..i know..that one is yours too..that's why i post my comment like that..
Ooo...i see...
But..i already on fw.31 and to use your deodex rom i have to downgrade again right.. so, i'll wait until cwm for XJ JB out.. and i'll test your deodex rom bro..
Sent from my ST26i using Tapatalk 2
I've got a problem when i install rom. In the cwm i click install zip from sdcard i choose your zip and install then CWM showed me Installation aborted (bad).Partition System is formated
ROS!U said:
I've got a problem when i install rom. In the cwm i click install zip from sdcard i choose your zip and install then CWM showed me Installation aborted (bad).Partition System is formated
Click to expand...
Click to collapse
Don't format sdcard with CWM.
Download ROM again, it could be corrupted.
---------- Post added at 05:00 PM ---------- Previous post was at 04:58 PM ----------
zona77 said:
Hahahaha..i know..that one is yours too..that's why i post my comment like that..
Ooo...i see...
But..i already on fw.31 and to use your deodex rom i have to downgrade again right.. so, i'll wait until cwm for XJ JB out.. and i'll test your deodex rom bro..
Sent from my ST26i using Tapatalk 2
Click to expand...
Click to collapse
I've already installed a previous rooted version of this rom, and now this. A few times until I got it right. From the beggining to end, maybe 30/40 minutes. It's not that long. But I really hope that someone manages to put cwm working on JB.
But you should update to this rom, since it has Flashgordon working and any changes that are made to it will be easilly flashable.
Ok I'll try once again
Mata_Ratos said:
Don't format sdcard with CWM.
Download ROM again, it could be corrupted.
---------- Post added at 05:00 PM ---------- Previous post was at 04:58 PM ----------
I've already installed a previous rooted version of this rom, and now this. A few times until I got it right. From the beggining to end, maybe 30/40 minutes. It's not that long. But I really hope that someone manages to put cwm working on JB.
But you should update to this rom, since it has Flashgordon working and any changes that are made to it will be easilly flashable.
Click to expand...
Click to collapse
I could probley port a CWM but i dont have a linux laptop im saving up for one but it will take quite a while plus id like to port cm10.1 for locked bootloader but again i have to wait for a linux laptop.
Poland has got method for the cwm for JB Well i installed this rom and i liked this....fast, light, smooth a few of the applications,all mods in one Great JOB gavster!!!!
gavster26 said:
I could probley port a CWM but i dont have a linux laptop im saving up for one but it will take quite a while plus id like to port cm10.1 for locked bootloader but again i have to wait for a linux laptop.
Click to expand...
Click to collapse
Really looking forward to the CWM for JB as I have not been able to downgrade to ICS.
Sent from my ST26i
nakTT said:
Really looking forward to the CWM for JB as I have not been able to downgrade to ICS.
Click to expand...
Click to collapse
why ages ? is it not just flashing with flashtool an old firmware ? around 5 min ???
I created this thread since there are no dedicated forums/threads for this specific model.
All these files are tested and works perfectly.
POST 1 = All the Necessary Files
POST 2= Guide and Tutorial
POST 3= Custom ROMs list & download.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FLASH TOOLS:
-MobileUncle MTK Tools v2.9.9: See Attachment
-SP Flash Tool v5.1516: http://www.mediafire.com/download/0ch3gbea3loais3/SP_Flash_Tool_v5.1516.zip
SPFT FIRMWARES:
SDs_Acer_AV0K0_Z500_1.005.00_EMEA_BGCs.zip : http://bit.ly/1BhCFQe
SDs_Acer_AV0K0_Z500_1.008.00_EMEA_CUS1.zip : http://bit.ly/1BhCGDJ
SDs_Acer_AV0K0_Z500_1.012.00_EMEA_GEN1.zip : http://bit.ly/1BhCG6u
SDs_Acer_AV0K0_Z500_1.012.00_EMEA_GEN1s.zip : http://bit.ly/1BhCGDN
SDs_Acer_AV0K0_Z500_1.008.00_EMEA_CUS1.zip : http://bit.ly/1BhCGU5
SDs_Acer_AV0K0_Z500_1.008.00_EMEA_GEN2.zip : http://bit.ly/1BhCGU7
SDs_Acer_AV0K0_Z500_1.006.00_EMEA_GEN3.zip : http://bit.ly/1BhCG6A
SDs_Acer_AV0K0_Z500_1.007.00_EMEA_GEN3.zip : http://bit.ly/1BhCGUb
SDs_Acer_AV0K0_Z500_1.003.00_EMEA_MTSs.zip : http://bit.ly/1BhCGUg
CUSTOM RECOVERY:
-Carliv Touch Recovery 3: http://acer.shreps.fr/dl.php?v=Carl...Ub3VjaC1yZWNvdmVyeS0zX1o1MDAtU2hyZXBzLmltZw,,
-ClockWork Mod Recovery 6.0.5: http://acer.shreps.fr/dl.php?v=CWM_...vWjUwMC9DV01fNi4wLjUuMC1aNTAwX1NocmVwcy5pbWc,
-ClockWork Mod Recovery 5.5 (Auto GEN): http://acer.shreps.fr/dls/storage/Z500/Z500_141010__recovery_141226-155907.img
ROOT TOOLS:
-KingoRoot for Windows (.exe)
-KingoRoot for Android (.apk)
See attachments
CUSTOM ROMS:
See third Post!
note: You don't need a Facebook account to view or download these Custom ROMs.
-----------------------------------------------------------------
Special thanks and credits to:
@Shreps for providing the acer firmware/recovery files and his dedicated Acer Thread.
MaximumROM for providing the ported Custom ROMs.
@AndroidXDA for the latest SP Flash Tool.
Getting Started
USE AT OWN RISK! I'M NOT RESPONSIBLE FOR ANY DAMAGES OR BRICKS THAT MIGHT OCCUR UPON FLASHING. YOU'VE BEEN WARNED!!!.
Before doing any flashing with your Acer Liquid Z500 you'll need to Root your device and flash a custom recovery. This is mandatory for flashing Custom Roms and making Backups.
Rooting may void your warranty, though this is localized and may not apply for your area/country. Here, in The Netherlands, rooting your android phone has been approved legal by the government, thus keeping your warranty if you need to return your device to the manufacturer.
This does NOT apply for flashing Custom Recovery's, therefore you need to flash back to the stock recovery.
Rooting:
First we want to Root our phone. We need KingoRoot for that. You can find it in my attachment in the post above. I haven't used the Android version, so i´ll only guide you through the windows version of KingoRoot.
People without a PC can try the provided KingoRoot_Android.zip, but i cannot guarantee it will work as i haven't tested it myself.
01) Go to your device settings and select 'Device Info'. Scroll down and tap the 'Build Number' 5x until you've unlocked 'Developer Options' displayed in a toast.
02) Go to 'Settings/Developer Options' and check 'USB Debugging Enabled' you are now ready to receive additional usb drivers and adb has full access to change files.
03) Connect your phone to your computer with a USB cable and wait until it's finished installing drivers.
03) Download and install KingoRoot for windows .
04) Run KingoRoot, the program itself is pretty self explanatory. Just click 'ROOT' and wait until the program has finished flashing. It will reboot your device automaticly on success and superuser app called 'KingUser' will be installed with it. If you don't like it you can try SuperUser or SuperSU from the playstore. (Make sure you've granted them SU_Access with KingUser before you remove KingUser)
05) You are now ready to flash a Custom Recovery.
Custom Recovery:
Now we need a Custom Recovery. We can use SP FlashTool to do that or we can use MobileUncle MTK Tools. I'm going with the latter because it's more user friendly instead of going through SPFT & Scatter Files. I haven't tried 'Flashify' or 'Rashr Flash Tool' for flashing Recovery's on MTK devices.
01) Download CTR or CWM Custom Recovery's from the above post. Make sure they are located at the root of your SDCard. Move/Paste them from /Download folder if necessary.
02) Download MobileUncle from my attachment or download it from the Google PlayStore.
03) Grand SU_Access to MobileUncle and select 'Flash Firmware'.
04) Your downloaded Custom Recovery's will be shown (if moved propertly to root of SD) select it and click 'Flash'.
05) Reboot into your new Custom Recovery automaticly --when prompted to do so--, or do it manually by turning phone off/on with 'Vol+ (Up) & Power' and select 'Recovery' in acer menu (apply/select with Vol- (Down))
06) Now make a nand/stock backup of your current (Stock) ROM.
07) When leaving Custom Recovery for the 1st time, it might ask you 'Rebooting device might change Recovery to Stock, want to fix it?' reply with Yes.
Flashing Custom ROMs:
Flashing a custom rom is easy. And if you perform everything right, you won't have to worry that you'll brick your device. I've tested most of the ROMs by myself, i can assure you that it's a save deal, just follow the instructions carefully.
01) Download a Custom ROM of your preference (See Post #3) Click the HIDE button to see additional Info and Instructions (which are taken directly from their FB page).
02) Reboot into Recovery and make a backup of your current rom.
03) Do a full cache/data/system wipe and wipe dalvik.
04) Select 'Install zip from sdcard' and select your downloaded rom.
05) Wait until it's finished flashing.
06) Reboot your device and enjoy!
Unbrick / Flashing Stock Firmware:
I haven't had the pleasure yet to unbrick any MTK device (a good thing, right!?), so i'm a little scarse to give any info onto how to perform such tasks with SPFT as someone who has experienced it by hand.
Neither have i re-flashed to Stock Firmware, because on all the MTK devices i've used, any Custom ROM for those devices worked flawlessly.
Check out the Acer thread by @Shreps for detailed instructions on how to restore and unbrick your acer phone. This method works for various Acer models.
http://forum.xda-developers.com/android/development/guide-firmwares-roms-cwm-root-acer-mtk-t2945933
The following ROMs are all based on Android 4.4.2 KitKat and some are heavily customized to look like Lollipop
The following Custom ROMs have been tested with the 'SINGLE SIM' variant of the Acer Liquid Z500. I don't think it'll work with the 'Dual Sim' versions of this handset.
PopKat v2.0
Popkatv2 for ACER Liquid Z500 (MT6582)
by jheffong
CREDITS TO Sir Neil Edward D. Diaz for developing this ROM.
Please READ the whole document!!!
Common features:
Deodexed
Zipaligned
Tweaked
Aside from being heavily-skinned with material design, this includes the following:
*Lollipop Launcher, Icons, Apps
*Lollipop Toggles in Notification Panel
*Floating Button in Modded MMS
*Simple Battery Styles
*Fluid animations for eye-candy
*Dolby Digital Plus (Super Loud Audio) for extreme music experience!
*No storage bug for single EBR firmwares
*No keyboard force close in land scape mode
*Can receive/send apk via bluetooth
*Efficient RAM management
*Already rooted with Kingroot
*Root explorer working woithout bugs
*Lollipop easter eggs
*AND MUCH MORE!
CHANGELOGS:
WIFI TETHERING > FIXED!
USB TETHERTING > FIXED!
GOOGLE PLAYSTORE ISSUE > FIXED!
OFF CHARGING ANIMATION > FIXED!
PHOTO EDITING on GALLERY > FIXED!
Download Rom
HOW TO INSTALL:
1. Reboot to CarlivTouchRecovery/CTR. (Not tested on other custom recovery)
2. Make sure you have a backup
3. Perform a full wipe.
4. Flash the Rom. (PopKatv2_Z500.zip)
5. Wait to boot up, it takes time, relax.
6. Reboot, ENJOY!!!
7. Go to CTR, flash the patch, reboot!
NOTES: Pay attention to this!!!
1. Go to Settings/Xposed/Modules >> check all the modules. Go to Framework tap "Install/Update" it will reboot.
Patch MMS/Settings/Bluetooth
======================================================
PussyFap v2.5
PUSSYFAP ROM for ACER LIQUID Z500 (MT6582)
by jheffong
CREDITS to Don Delfin Espino, DEVELOPER OF THIS PUSSYFAP ROM.
***** Fap is an Android 5.0 Lollipop Inspired Rom. With a little bit of Twist... *****
colonthree-emoticon
Features:
Material Themed
Lollipop Inspired Platlogo
Built-in Features on Advance Tab
Dolby Digital Plus
Themed Recent Apps
Custom Action Bar
Hybrid Signal Bars
3minit Battery Styles
Smooth Lollipop Animations
Tinted Statusbar
Google Boot Logo
Android L Bootanimations
UPDATE: PussyFap v2.5
Fixed Font Style
Fixed Keyboard Force Closes
Fixed Dialer dialpad digits size
Fixed Wrong tint in Gallery app
Fixed SystemUI Force closes when adding
Navigation Bar
Fixed FB videos when palying on stock browser
Making Battery Styles Non apk to save
more ram
UC browser app also added
PLEASE READ THIS FIRST!
Notes:
1. 1). Flash Rom, 2). Flash Update.zip, 3) Flash Dolby.zip & 4). Flash Root.zip - Reboot.
2. After flashing ROM it may say "SYSTEMUI has stopped"
3. Please uninstall Clean Master APP.
Download Rom
[UPDATE]PussyFapV2.5.zip
DolbyForPussyFap.zip
KingUser.zip
======================================================
VionicL v1.5
VIONIC L for ACER Liquid Z500 (MT6582)
by jheffong
CREDITS TO:
ROM DEVELOPER: Vibhor Chaudhary, FULL CREDITS TO HIM!!!
FEATURES:
*Themed like dark pure material
*Added working brightness slider
*Themed contacts, music player, mms and dialer, Stock file manager as well
*Animated check boxes and radio buttons
*Android L lockring added
*Bold clock in status bar and status bar expanded
*Changed the color of status bar
*Android L keyboard*Transparent recent apps background
*Android L bootanimation
*Rom is not rooted, you gotta flash root.zip
*Added battery and setings in status bar expanded.. see screenshots
*Changed most of the app icons to match with lolipop icons
*Battery and Performance Tweaks added
*Fully deodexed /app, /priv-app, /framework
*Dolby Digital player added
*Click on battery icon in status bar expanded will take you to battery too
*Tool box, listview animations, xposed integration. dolby digital player, Smart Gestures, Engineering mode is a part of settings now
*Ad free hosts
*Android L ester egg with lland game..
*Android l call
*Remaining figure out yourself
HOW TO INSTALL:
1. Reboot to CarlivTouchRecovery/CTR. (Not tested on other custom recovery)
2. Make sure you have a backup
3. Perform a full wipe.
4. Flash the Rom. (VionicL.zip)
5. Flash the ROOT.zip
6. Wait to boot up, it takes time, relax.
7.Reboot into recovery mode again. (CarlicTouchRecovery)
8.Flash the "VionicL_Update.zip"
9.Reboot, ENJOY!!!
Download Rom
Update v1.5
Root
======================================================
XPERIA Z2
XPERIA Z2 for ACER Liquid Z500 (MT6582)
by jheffong
HIGHLIGHTS:
Xperia Z2 UI and Features
Xperia Z2 X-Reality Engine
Xperia Sound Enhancement/Clear-audio+
Working Walkman Visualizer
Sony Social Camera and Media Apps
Themed Dialer, Contacts, MMS by kishorerprem
Customizable Battery Icon
Moded Lockscreen added by me
Navigation Bar Settings added by me
Material Wallpaper added by me
Listview Animation added by me (removed by default to lessen battery consumption)
Multi-Window Sidebar
Visible brightness slider in notification panel
Xpose Installer integrated to Settings
AROMA INSTALLER
Gapps Included Pre-Rooted and a lot more..
Note: Back-up your Previews ROM and your Google Account before flashing in case you encountered google signing-in problem just restore your account and you are good to go
INSTRUCTIONS:
1. Reboot to CarlivTouchRecovery/CTR. (Not tested on other custom recovery)
2. Make sure you have a backup
3. Perform a full wipe.
4. Choose zip from SD card locate ROM zip package
5. Install & wait for Maximum ROM Installer prompted
6. Follow all given instructions and options
7. After the ROM flashed completed click finish, reboot your device.
8. Wait to boot up, it takes time, relax.
=
9. Go to CTR again, flash the "UPDATE_(1) Z2_updated.zip" , REBOOT.
10. You'll see " Android is upgrading..." just WAIT.
=
11. Go to CTR again, flash the "UPDATE_(2) Z2_update_bravo.zip" , REBOOT.
=
12. Go to CTR again, flash the "UPDATE_(3) SocialCamera&MediaApps.zip" , REBOOT.
=
13. Go to CTR again, flash the "UPDATE_(4) XperiaHomeWithNavBar.zip" , REBOOT.
CONGRATULATIONS!!!
FIRST THING TO DO's:
1. Go to settings > personalization > Lockscreen Settings (make some changes of your own)
2. Go to Settings > Blur Settings > Scroll and find Translucent Background and check the following: Header, Quick Settings, Notifications.
3. Go to Settings > Xposed framework > Xposed Installer > Modules> check all modules provided then install xpose framework.
Pay attention to this - After start-up guide you will ask to choose Home App
Choose Xperia Home and select "Always"(do not choose lockscreen)
BUG: OFF CHARGING ANIMATION, not a big deal anyway.
Download all files
Download Rom
Update1
Update2
Update3
Update4
======================================================
Samsung Galaxy S5
Samsung Galaxy S5 for ACER Liquid Z500 (MT6582)
by jheffong
HIGHLIGHTS
Samsung S5 UI
Samsung S5 Messaging
Samsung S5 Settings
Samsung S5 Dialer
Samsung S5 everything
DUAL SIM
4G (KUNO)
ROOTED
ODEXED
How to install: MAKE SURE YOUR PHONE IS ROOTED!!!
1. Reboot to CarlivTouchRecovery/CTR. (Not tested on other custom recovery)
2. Make sure you have a backup
3. Perform a full wipe.
4. Flash the Rom.
5. ENJOY!!!
Download Rom
PHONE STORAGE IS NOW DETECTED!!!
NO MORE POP UP "*android.process.media has stopped" after using USB STORAGE.
Instructions:
1. Download the BUGFIXv1.zip(boot.img). EXTRACT! Drag and replace the boot.img inside the ROM.
FLASH THE ROM.
2.Download the BUGFIXv1.zip(boot.img). EXTRACT! If you have BACKUP just replace the boot.img inside of it. RESTORE.
Patch
======================================================
If anyone know more Custom ROMs that are compatible with the Acer Liquid Z500 please post them or PM me with the info so i can add them to this section.
I'm sorry for not including any screenshots because the original source has not provided them on their Facebook page for this specific model (Only for the CherryMobile Flare3).
Source: MaximumROM
Screens of the VionicL v1.5 ROM that i'm using as a daily driver.
Nice to see this
Good job
Shreps said:
Nice to see this
Good job
Click to expand...
Click to collapse
Yeah it's too bad there are no dedicated forums for Acer specific models. Even less popular devices have their own section.
There is not much Info on the Liquid Z500 regarding Custom Roms so i added all the roms i could find (from one source only though ) since XDA, HTCMania, MoDaCo, NeedRom, or any other site, do not feature them (google searches lack information).
So i took what i could find and cramped them into one Thread
Hello mate, thank you for this thread it looks awesome! I wanted to ask you where did you get SDs_Acer_AV0K0_Z500_1.003.00_EMEA_MTSs.zip firmware? My device came with it and when i was searching for it i couldn't find it! I was thinking maybe it's carrier branded firmware because MTS is the abbreviation of my carriers name... If i was mistaken do you by any chance know what does MTS part of it mean? Thanks in advance!
Ajax1337 said:
Hello mate, thank you for this thread it looks awesome! I wanted to ask you where did you get SDs_Acer_AV0K0_Z500_1.003.00_EMEA_MTSs.zip firmware? My device came with it and when i was searching for it i couldn't find it! I was thinking maybe it's carrier branded firmware because MTS is the abbreviation of my carriers name... If i was mistaken do you by any chance know what does MTS part of it mean? Thanks in advance!
Click to expand...
Click to collapse
As far as I was able to find it's because it's MTS branded...
Ajax1337 said:
Hello mate, thank you for this thread it looks awesome! I wanted to ask you where did you get SDs_Acer_AV0K0_Z500_1.003.00_EMEA_MTSs.zip firmware? My device came with it and when i was searching for it i couldn't find it! I was thinking maybe it's carrier branded firmware because MTS is the abbreviation of my carriers name... If i was mistaken do you by any chance know what does MTS part of it mean? Thanks in advance!
Click to expand...
Click to collapse
I did not find those files myself, but I took them from @Shreps main thread. But my hunch is that they are provided by acers official website.
About MTS, I don't know..
Sent from my ACER LIQUID Z500 using XDA Free mobile app
Just a little question. All of these ROMs are bug-less? Can you post some screens of the Galaxy S5 ROM please?
Thank you in advance
rogermachadostb said:
Just a little question. All of these ROMs are bug-less? Can you post some screens of the Galaxy S5 ROM please?
Thank you in advance
Click to expand...
Click to collapse
LOL... bug-less... Less bugs you mean? Bug-less in the world of automation and mobile devices does not exist...
You know what I meant. I'm not stupid and I understand that. I'm not asking for the perfect OS, I'm just asking if they are good for a daily use.
Please help,
i Have tied to get a custum rom on my Acer Z500...but now there is no life in it anymore...Only bleu light and when i connect the usb then it reconise the phone.
I Downloaded the rom, drivers, scatter for z500 and tried many times with SP_Flash_Tool_v5.1516 to try bring back life.
No succes and every time i get : Brom error; S_DL_GET_DRAM_SETTING_FAIL (5054)
I used the scatter from: http://forum.xda-developers.com/android/development/guide-firmwares-roms-cwm-root-acer-mtk-t2945933
It will be great someone can help me... Its my wife phone and this is nog good for my relation.
cejean said:
Please help,
i Have tied to get a custum rom on my Acer Z500...but now there is no life in it anymore...Only bleu light and when i connect the usb then it reconise the phone.
I Downloaded the rom, drivers, scatter for z500 and tried many times with SP_Flash_Tool_v5.1516 to try bring back life.
No succes and every time i get : Brom error; S_DL_GET_DRAM_SETTING_FAIL (5054)
I used the scatter from: http://forum.xda-developers.com/android/development/guide-firmwares-roms-cwm-root-acer-mtk-t2945933
It will be great someone can help me... Its my wife phone and this is nog good for my relation.
Click to expand...
Click to collapse
Have you followed my steps? because if you did you wouldn't need to mess with scatter files and the flashing is pretty easy compared to some other brands.
I have no discrete awnser, so if anybody else could shine some light on this issue, thanks!!
@nikagl mischien??
cejean said:
Please help,
i Have tied to get a custum rom on my Acer Z500...but now there is no life in it anymore...Only bleu light and when i connect the usb then it reconise the phone.
I Downloaded the rom, drivers, scatter for z500 and tried many times with SP_Flash_Tool_v5.1516 to try bring back life.
No succes and every time i get : Brom error; S_DL_GET_DRAM_SETTING_FAIL (5054)
I used the scatter from: http://forum.xda-developers.com/android/development/guide-firmwares-roms-cwm-root-acer-mtk-t2945933
It will be great someone can help me... Its my wife phone and this is nog good for my relation.
Click to expand...
Click to collapse
Dual or Single SIM device? What full SPFT roms did you try to install?
To recover a device you should follow this guide:
http://forum.xda-developers.com/showpost.php?p=56877584&postcount=2
And use these SPFT Firmwares (depending on single or dual SIM):
http://forum.xda-developers.com/showpost.php?p=61359937&postcount=4
Z500 Firmware - Acer_AV0K0_Z500_1.012.00_EMEA_GEN1.zip (Dual SIM)
Z500 Firmware - Acer_AV0K0_Z500_1.012.00_EMEA_GEN1s.7z (Single SIM)
Good luck!
Regards,
Nika.
JMailuhu said:
Have you followed my steps? because if you did you wouldn't need to mess with scatter files and the flashing is pretty easy compared to some other brands.
I have no discrete awnser, so if anybody else could shine some light on this issue, thanks!!
@nikagl mischien??
Click to expand...
Click to collapse
JMailuhu Thank you 1000 times!!
Life is back again on my Acer 500z.
Nice that you and Nika would help me to work it out/
Keep on youre good work please. :good:
Is there a Way to download the ROMs except MEGA? It always fails. Everything can be downloaded properly, just the ROM-Download interrupts always.
EDIT: And I will not buy anything there or pay for something...
Mario472 said:
Is there a Way to download the ROMs except MEGA? It always fails. Everything can be downloaded properly, just the ROM-Download interrupts always.
EDIT: And I will not buy anything there or pay for something...
Click to expand...
Click to collapse
I would prefer to know which you want so I can download them and provide them on another mirror.
The stock recovery (not SPFT as mentioned in first post!) are also mirrored here:
SDs_Acer_AV0K0_Z500_1.003.00_EMEA_MTSs.zip http://cutt.us/WRpMM
SDs_Acer_AV0K0_Z500_1.005.00_EMEA_BGCs.zip http://cutt.us/Vf7r
SDs_Acer_AV0K0_Z500_1.006.00_EMEA_GEN3.zip http://cutt.us/aeFAL
SDs_Acer_AV0K0_Z500_1.007.00_EMEA_GEN3.zip http://cutt.us/0vbM
SDs_Acer_AV0K0_Z500_1.008.00_EMEA_CUS1.zip http://cutt.us/wdw3
SDs_Acer_AV0K0_Z500_1.008.00_EMEA_GEN2.zip http://cutt.us/Up0NC
SDs_Acer_AV0K0_Z500_1.012.00_EMEA_GEN1.zip http://cutt.us/Fok9
SDs_Acer_AV0K0_Z500_1.012.00_EMEA_GEN1s.zip http://cutt.us/3QUa
Regards,
Nika
---------- Post added at 10:50 PM ---------- Previous post was at 10:11 PM ----------
And here's some of the custom ROMs:
POPKATv2PATCH.zip http://bit.ly/1TNVYUm
PopKatv2_z500.zip http://bit.ly/1TQ4mrK
PussyFapROM.zip http://bit.ly/1HStySr
ROOT.zip http://bit.ly/1NBviEC
S5ROM_ACERLz500.zip http://bit.ly/1JcStkx
UPDATE_(1) Z2_updated.zip http://bit.ly/1My6XCE
UPDATE_(2) Z2_update_bravo.zip http://bit.ly/1Ks6Hiv
UPDATE_(3) SocialCamera&MediaApps.zip http://bit.ly/1JdrxWm
UPDATE_(4) XperiaHomeWithNavBar.zip http://bit.ly/1My71Cp
VionicL+V1.5+update.zip http://bit.ly/1IZd7p2
[ROM] XPERIA Z2.zip http://bit.ly/1TNWj9I
Please sort yourself, add them as mirrors and let me know if I missed something and/or should mirror something else.
Regards,
Nika.
Thank you very much, I think it'll be the Samsung-Thing and hopefully it works with the Z500 Plus too. Acer even won't provide a Lollipop-ROM...
Anyway, I'm not using the 2nd SIM.
EDIT:The VionicL-Link seems to be broken.
Sent from my Z500 using XDA Free mobile app
hi, I was wondering if Xposed Framework can be used in Acer Z500? I really want to modify the notification bar, but the Cutom Rom in the first page says that it's probably impossible for Dual SIM version, so I want to modify it with Xposed.