Database Info

[ROM] HNS-Inverted v2.8I

NO MORE UPDATES. NO MORE UPDATES. NO MORE UPDATES.
There is a flash able zip if anyone still requires it, though these inverted apps are included in hypernonsense.
I am a great fan of Splder`s HNS rom for the Sensation, but there was a couple of bits that I have hopefully improved. I`m still very much a learner, but I thought I`d share this...
Apps inverted...
MMS Works
Facebook Sync works
CM9 ringtones and sounds
Live wallpapers
TTS Enabled
This is an initial release which is probably full of problems...
This is in NO WAY a replacement for Splders ROMs which are excellent, but just an alternative
Give it a try. This is the v2.8 Overloaded version which I am in the process of updating with the 2.9 updates
I`ll delete this post of required. Please don`t flame me I`m only trying to help

Download...
http://www.mediafire.com/?swlbrvghja9t0fa
Screenshots to follow

Changelog...
I hesitate calling this a release, as it is all Splder`s work, I have just put inverted apps on...
22/06/2012 - OK. Initial "release"

Instead of inverting some apps and releasing as a rom, Why not just make a "Theme pack" and release it in themes and apps? That way you have a smaller package and dont have to worry about calling it a release

add some screenshots too please ;]

Good idea @bonesy. I just thought I`d save some people some work by putting everything in the ROM.
Mediafire links will be posted as soon as it is finished uploading.
I`ll see what Splder thinks before I do anything. This is his and Kristof`s baby after all!
Screenshots coming too as soon as SD card is free

OK... Posted the update as a flashable zip as requested. It is in Splder`s HNS thread

N10AP said:
Good idea @bonesy. I just thought I`d save some people some work by putting everything in the ROM.
Mediafire links will be posted as soon as it is finished uploading.
I`ll see what Splder thinks before I do anything. This is his and Kristof`s baby after all!
Screenshots coming too as soon as SD card is free
Click to expand...
Click to collapse
So you haven't asked for permission?

Well no. I wasn't aware I should. If I was infringing someones copyright then I wpould. This was just to assist anyone. I'm no ROM developer. If it comes to asking for permission then what would be the point? Android is an open platform.
I'm not trying to steal anyone's thunder. The updates I provided I wasn't sure how to get them out there so I thought a custom ROM might be a good idea. Until I learnt how to make a flash able zip, which I have done. It is in splders thread... Therefore this won't be updated again...
Wiseass

Pantech Burst CM10 Discussion Thread

To Some clean space to Our beloved devs I made this thread for all the questions , reviews , problems , etc . Before Posting anything Please look into these resources or Quick Google your doubt , if not found than ask here .
OFFCIAL CM10 DEVELOPMENT THREAD
GENERAL PANTECH BURST DISCUSSION THREAD
[INDEX]EVERYTHING FOR PANTECH BURST
Working -
Everything For Daily Driver
Whats not working :-
CLICK ME :fingers-crossed:
Download Links :-
CM10 [PulicRelease] - HERE
Gapps for JB 4.1.x - HERE
Click to expand...
Click to collapse
::: INSTALLATION PROCEDURE :::
-First of all , If In case Any loss happened Neither the Dev team or me is responsible for that . Though Nothing should happen 99.9% .
-Boot into CWM Recovery . Either 5.x or 6.x ( by Attn1 one [Preferred]) . Everything will be safe . Don't believe in any myths of cwm 6.x is dangerous and all . For reference -> These recoveries are one my self tested .
-Clear Wipe Data / Factory reset and clear dalvik cache from advance menu .
-Install from SD/EXT-Sd ( Where you put simply select that one)
-Choose zip and confirm action .
- Flash Gapps
-Reboot .
Optional :
-Give thanks and help the DEV team by donations
----
Before any questions make sure you googled your question thoroughly and scanned this URL and made sure your problem's solution don't lie there
UPDATE :
CM11 and new recoveries .

dpwguenther said:
is it safe to flash without downgrading to GB , just as cm?
Click to expand...
Click to collapse
Yup it is safe to flash over ICS . I did on cm5.x But I think that doesn't matter .

ujjwalchhabra said:
Yup it is safe to flash over ICS . I did on cm5.x But I think that doesn't matter .
Click to expand...
Click to collapse
ive noticed that the latest build of cm10 has popup error that the other one didnt have , it was something about android.core has stopped

Ive updated the wiki to include this discussion

If I find a cm10 mod for another phone, like a 5 button shortcut lockscreen or changing the lockscreen font, can I use it with this cm10 ?
Sent from my PantechP9070 using xda app-developers app

dpwguenther said:
If I find a cm10 mod for another phone, like a 5 button shortcut lockscreen or changing the lockscreen font, can I use it with this cm10 ?
Sent from my PantechP9070 using xda app-developers app
Click to expand...
Click to collapse
You need to use go locker and theres a theme on the play store that almost copys our lockscreen on the ics update. https://play.google.com/store/apps/...W5vdGVjaC5nb3NjcmVlbmxvY2sudGhlbWUuYnVyc3QiXQ..

Paranoid Android ROM
I just finished compiling Paranoid Android for the Burst. I'm going to test it out when I get home and I'll let you know how it works.
Check out my guide, Compile Unofficial Paranoid Android for Pantech Burst

marcusmarcus said:
I just finished compiling Paranoid Android for the Burst. I'm going to test it out when I get home and I'll let you know how it works.
Check out my guide, Compile Unofficial Paranoid Android for Pantech Burst
Click to expand...
Click to collapse
Once CM gets fixed everything will be up ! There will be like rain of rims What I think But Cm project seems somewhat slow :/ . I downloaded 5.4gb somehow . 3.6gb left still for CM10 .

ujjwalchhabra said:
Once CM gets fixed everything will be up ! There will be like rain of rims What I think But Cm project seems somewhat slow :/ . I downloaded 5.4gb somehow . 3.6gb left still for CM10 .
Click to expand...
Click to collapse
Yeah. The nice thing about Paranoid is it is based on CM10, so once CM has everything fixed, PA will most likely have everything fixed. It takes a long time to download the repo. Glad I have 15Mbps Internet, though this makes me wish it was even faster.
If anyone wants to test out Paranoid Android on their Burst, I posted a link to the one I built at the bottom of the first post on Compile Unofficial Paranoid Android for Pantech Burst

marcusmarcus said:
Yeah. The nice thing about Paranoid is it is based on CM10, so once CM has everything fixed, PA will most likely have everything fixed. It takes a long time to download the repo. Glad I have 15Mbps Internet, though this makes me wish it was even faster.
If anyone wants to test out Paranoid Android on their Burst, I posted a link to the one I built at the bottom of the first post on Compile Unofficial Paranoid Android for Pantech Burst
Click to expand...
Click to collapse
saw your guide I'll have to try it out when I get home that way i'll have all 3 ready to go once cm is ready. marked your post as an announcement to keep it at the top

kagedws6 said:
saw your guide I'll have to try it out when I get home that way i'll have all 3 ready to go once cm is ready. marked your post as an announcement to keep it at the top
Click to expand...
Click to collapse
I have all 3 ready, too.

Isn't External SD support and USB mount fixed? - by Milf

Not sure about usb mount but I know ext sd does not. I couldnt even get it to mount through terminal. Anybody get external to mount at all?
Sent from my PantechP9070 using xda premium

See this :- Link

Here is the public release with the call audio/usb and sd mounting/att data fixes.
Please report back any issues and if possible have a logcat of you while the issue came up so we can better work towards trouble shooting the problems.

GPS doesn't work.
The CRT off animation works randomly with stock theme and doesn't work with other themes.
SystemUI FCs when theme is changed.
This is on the 7th march build.

adizz4 said:
This is on the 7th march build.
Click to expand...
Click to collapse
The first: thank you for posting here. You have been one of the few users, that understands the purpose of this thread.
In the repositories there are many pending changes. For this reason, there is no valid rom with date "March 7th", is smarter wait a few days to install the rom.
We do not wish to delay the changes, but these must be properly tested. When these changes can be considered validated, will be communicated to all users.
Thank you.

mifl said:
The first: thank you for posting here. You have been one of the few users, that understands the purpose of this thread.
In the repositories there are many pending changes. For this reason, there is no valid rom with dated March 7, is smarter, wait a few days to install the rom.
We do not wish to delay the changes, but these must be properly tested. When these changes are approved, will be communicated to all users.
Thank you.
Click to expand...
Click to collapse
:good::good::laugh: I'm really happy . And feel grateful that we have hardworking people like you, ninjah ,stevodo and all . I just started this work and now I felt how difficult it it indeed . Make changes compile than flash and all that stuff is pain in ...... . I'll give my best to again make custom rom of CM10 -AOKP - PA . Least I'm capable of now :silly:

Maybe we should start a thread for specifically for reporting bugs in co10 builds. That way it keeps the porting thread cleaner. Maybe in the orignial post for it, put an outline of how to report bugs, like build name/date, issue(s) reporting, logcat attachment /pastbin, etc.

marcusmarcus said:
Maybe we should start a thread for specifically for reporting bugs in co10 builds. That way it keeps the porting thread cleaner. Maybe in the orignial post for it, put an outline of how to report bugs, like build name/date, issue(s) reporting, logcat attachment /pastbin, etc.
Click to expand...
Click to collapse
There is no point. People do not want to understand the reasons that is requested write messages in one or another thread.
Every day that passes I am more convinced that writing in our threads is like preaching in the dessert.
For my part suggest that users who really want to contribute to this project visit http://www.devsnest.com.
P.D. Sorry to be so negative, but today people with their lack of education has put me grumpy.
Greetings.

[ROM][11/19/13][Flo] - {Latest OTA} - Stock Rooted 4.4 - KRT16S - First KitKat Update

Stock OTA Update 11/19/2013
Features
Pre-Rooted with SuperSU 1.69
Busybox
init.d support
No Other mods!
Odex (Preferred) or De-Odex!
Please Hit Thanks and Rate the thread 5 Stars!
MOD EDIT: Link removed as domain has expired. Thread closed until new links can be installed
Enjoy!
[/CENTER]

Sharing Policy
The spirit of Open Source is to share your knowledge and files with the rest of the world so they can improve on what you do when possible. This is also my philosophy and I would never compromise that!
You are free to use this ROM or any part of this ROM any way you like as long as you give proper credits!
Do not use my work if you cannot give proper credits!
Consider this your permission! Please do not PM me asking if its OK to build off this ROM. Permission granted!
However this does not include my CleanROM series of ROMS. Please do not use those without contacting me first!
This ROM is not a CleanROM. Its a stock rooted and all yours!
If you are going to use this as a base ROM for your own creation then you can at least hit Thanks in the OP. Lots of developers use my work and never once thank my OP. Don't be that guy!
Good Info / Thread Rules
The original KitKat Bootloader files can be found here (these are from the first OTA to KitKat): http://forum.xda-developers.com/showpost.php?p=47411018&postcount=3
Please dont ask if you can dirty flash. You can do what you want. Make a nandroid BEFORE you flash, if it doesnt work out then just restore your nandroid and re-plot your method of flashing.
Please dont post anything other than this ROM specific related questions. This is not a general topic thread about KitKat. Its here to help users install the ROM and ask questions about ROM usage. Its not here to ask questions about other ROM's, getting OTA's or what you think Recovery is capable of. Go to General with that stuff.
Please do NOT post mirrors of my work! I understand you want to help but the only person authorized to mirror my work is me.
Thanks to the following people that make what I do possible
DSI-XDA (Kitchen tools)
Chainfire (Root)
JesusFreke (smali tools for de-odexing)
Everyone who donates, says positive things and over encourages me to make ROMZ!
My Wife (for not feaking out when I go a day without sleep so I can make ROMZ, unlike most wifes, she gets it!)

Please Rate the thread 5 Stars before the Nexus Trolls get here!
There is a group of disturbed people that rate every thread 1 star in this forum.
Please rate it 5 stars before there lame attempts to piss on every one fail!
Woooooot!

shivasrage said:
First thanks scrosler for the deodexed ROM....very Quick...:good:
Also I have a little question...
do you cook your ROM´s with the kitchen..??
if so are you interested to share the edify_defs files
for the flo and eventually for the grouper...?
greets
Click to expand...
Click to collapse
I dont use Edify defs. I hand write my updater scripts. Nothing to share.
jordirpz said:
Thanks for all, but ART works in odex or deodex 11/19/13 rom?, because in the other doesnt work for me, i had bootlop.
Enviado desde mi GT-I8160 mediante Tapatalk
Click to expand...
Click to collapse
Only Odex. De-Odex is old... Art is new!

Mayday_XL said:
Sorry, i mean odex.
Click to expand...
Click to collapse
Because odex is better, more efficient so you get a smoother feel.
De-Dodex is not as smooth as odex. Some devices you can see this better in. This device is pretty close. But if you want the best then you go Odex.

mine say KRT16O i used the updater from your kitkat rom

duryard said:
Can we do dirty flash if coming from your KRT16O?
Click to expand...
Click to collapse
blameitonchemo said:
Just looking to clarify. Coming from PA 4.3, I simply flash this without a full wipe? Or do I need to plan to lose everything (apps/settings/files)?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
If your coming from another stock based ROM a wipe would not be needed.
If your coming from something like PA or CM then I would wipe because I dont know s**t about those ROMS
KiaraTheDragon said:
mine say KRT16O i used the updater from your kitkat rom
Click to expand...
Click to collapse
The ROM does or the Updater script?

I think I found a bug in Googles code...
If you look real closely at that WiFi Icon in the status bar, the arrows dont show up when data is going in and out.
Is it just my old eyes or can anyone confirm?

ldmeeds said:
I just went to use my tablet and the update was on my screen. I didn't think we could get OTA's if you had a custom recovery installed. It just showed up all by itself
Click to expand...
Click to collapse
Not true and not related to this specific ROM.
Please take that question to General or Q/A.
wdarea51 said:
So can we dirty flash from KRT16O? I literally just flashed and re did ALL of my apps and settings yesterday, and I would hate to have to wipe again and redo all apps and settings again one day later, its literally a few hour process. Thanks!
Click to expand...
Click to collapse
I just stated 5 posts ago if you coming from a stock base it would more than likely be fine.
You guys know how to make Nandroids, right? Back ups?
Its always best to do that, test what you want, if it doesnt work out, then restore your nandroid and you have lost nothing.

scrosler said:
I think I found a bug in Googles code...
If you look real closely at that WiFi Icon in the status bar, the arrows dont show up when data is going in and out.
Is it just my old eyes or can anyone confirm?
Click to expand...
Click to collapse
It seems to me that KRT16O has this bug already.

jwong.hhf said:
It seems to me that KRT16O has this bug already.
Click to expand...
Click to collapse
It's not a bug. It's a feature
You can see way these changes were made here A Google Engineer Explains Why KitKat Has White Status Bar Icons And Only Shows Connectivity In Quick Settings

FYI: Moved files to Android File Host

scrosler said:
I think I found a bug in Googles code...
If you look real closely at that WiFi Icon in the status bar, the arrows dont show up when data is going in and out.
Is it just my old eyes or can anyone confirm?
Click to expand...
Click to collapse
I don't think that is a bug. It was mentioned as a "feature", along with the GPS not blinking anymore when searching.
The arrows got moved into the drag down status bar.
They seem to not really want you to know what is going on and whether you are online, when data is being sent/received, whether GPS is running, etc.

Edited

Thread Cleaning
Ok folks, the OP requested a thread cleaning.
So here's how it goes....
1) Thanks - Deleted as you have a "Thanks" button. Use it please. No reason creating a new post.
2) Slow downloads - This can happen anywhere. Try at a different time. No reason creating a new post.
3) Dirty Flash - Com'on folks, you take your chances when you dirty flash. For best results, always wipe.
Now, the above posts have been cleaned. I HAVE however, left some of the OP's replies so a touch of info has been saved.
Please, look at the info above, and in the OP BEFORE you post. The Rom is Stock, so there really shouldn't be a whole lot of questions, and most of those belong in the Q & A Forum.
Cheers
MD

What if I coming from KRT16O ?
Sent from my Nexus 7 using XDA Premium HD app

Ok so I have actually found something I'm still a noob at! I updated to KRT16S with a dirty flash from Scrosler's KRT16O, and it's still showing I have an update avaliable in my status bar..How can I get rid of this notification?

mds96 said:
Ok so I have actually found something I'm still a noob at! I updated to KRT16S with a dirty flash from Scrosler's KRT16O, and it's still showing I have an update avaliable in my status bar..How can I get rid of this notification?
Click to expand...
Click to collapse
Force stop Google services framework... After that I would reboot the tab or some things could run funny like the time will stop
Sent from my HTC One using XDA Premium 4 mobile app

I didn't get transparent navbar & new google launcher after flashing this..

manujis said:
I didn't get transparent navbar & new google launcher after flashing this..
Click to expand...
Click to collapse
This is for the Nexus 5 only, at least for now.
http://www.youtube.com/watch?v=THnJ8exsxCM

[FAQ] Simplistic Framework/Simplistic Control for Note 3

Similarly to the Note 2 Framework where I created an FAQ, I will create one for the SF for Note 3.
What does "SF" mean?
SF means "Simplistic Framework", and in this FAQ it will be called this.
I flashed SF and get a bootloop even if it is a compatible ROM, why?
There seem to be 2 Main reasons for this.
1) Problems with other Mods
-> Sometimes it helps Flashing SF first.
I have Flashed this but I dont see an app to set anything.
The Zip you download is simply the framework which inserts the tweak base into the system.
you need either the limited Control app (free; in OP of SF Main Thread) or
the Simplistic Control app from either the Play Store or via Paypal (PayPal might need some time as seen on the top of the question list)
I installed the App from Play Store, but nothing I set works.
Same Situation like above. SF is a 2-Part System, meaning you need the ZIP from SF Starting Post AND the App.
#4 Can you make it work on x?
As of now, no. Legend said he won't support other devices instead of the International SM-N905 because
Hi, I said this quite a few times, I won't/can't make a version for any device that I don't actually own.
Click to expand...
Click to collapse
Working ROMs for SM-N905:
Deodexed & Odexed FNG2
------------->from here on listed ROMs I dont have any Feedback whether or not they are working with SF, please contact me about which are working and which not.
many Custom ROMs based on FNG2
definitely not Working ROMs:
Stock Odex except for FNG2
AOSP/CyanogenMod/any other non-Samsung based ROMs
Any 4.3 ROMs
if I forgot something, or something isnt well-explained enough, just post it here or via PM.

reserved for changelog

reserved

this one as well

last one

This belongs in the general section, like the Note 2 FAQ SF thread. This is, as of this writing, in the original development section.
Sent from my SM-N900P using Tapatalk

okay thx for info. I thought It fits next to the SF Thread so ppl dont have to look for it.

MK51.1-hlte (HYBRID) MOKEE-ZEN-UI 160403-RELEASE, by ENIAC

What is Mokee Rom?
It is a based-Cyanogenmod Rom, Android 5.1.1 Lollipop, multi-language, open source, created by Chinese developers.
Official Website:http://www.mokeedev.com/
English page for downloads: http://download.mokeedev.com/.
Before test the rom, remember that you are responsible for handling your device. Only you are responsible for possible damages flashing roms.
What different is from official version?
- Gapps are integrated ( usually the are in my roms).
- Xposed framework, pre-installed in system.
- Applications designed to make the Spen useful with the possibility of putting sound when removing and reinserting the Spen.
- Two different cameras, HTC M9 and his gallery, and Snap.
- Other stuff...
In 4.16.03 version you can find:
-most UI apps ZEN-based system Mokee, including:
-com.asus.backuprestore
-com.asus.browser
-com.asus.calculator
-com.asus.calendar
-com.asus.deskclock
-com.asus.drawres
-com.asus.email
-com.asus.filemanager
-com.asus.flashlight
-com.asus.gallery
-com.asus.ime
-com.asus.linkrim
-com.asus.lock
-com.asus.message
-com.asus.mobilemanager
-com.asus.music
-com.asus.server.azs
-com.asus.sitd.whatsnext
-com.asus.soundrecorder
-com.asus.soundrecorder
-com.asus.weathertime
The CM12-based mokkee apps redundant with the above, are deleted.
Mokee launcher is not present, ZenUi launcher is the default launcher. However you can apply themes in other items with CM-engine.
All gapps and common applications are updated.
FX special Mokee Viper4android version.
How to INSTALL:
From recovery :
Wipe Data/Factory Reset--"Clean To Install a New Rom".
Wipe Cache Partition
Advanced--"Wipe Dalvik Cache"
Power options----Reboot Recovery
Install Zip----Choose Zip from / Storage/Sdcard1.....
Release 160403:
1st STEP.- FLASH THE ROM
https://mega.nz/#!F980zDTC!aptfRFuguF3TKb61If8F-lzzIg0O5NpCSbxS9kd9HK4
md5 checksum: ed22db4b9a819cd18999a3dad7c31e72
2nd STEP. FLASH XPOSED ZIP:
https://mega.nz/#!c9MjSTpB!1S1nfUKCKSeIT94zn4fVqAZsl9-vAruvZHS49nllegw
3rd STEP. .FLASH SUPERSU:
https://mega.nz/#!oskWnZxZ!v9t8_-Tdbv36ebQiKW1qX8g2SKRsSrFcsZ8hImznvkk
Yo can flash all steps at the same time, without rebooting in each step. ( easier for TWRP users).
Important:
You'd better disable the update by OTA , because doing an update from update advise, will give you Fc's or error in some parts . And you will loose all Zen-Ui stuff.
If you see an advise for update, simply, don't do it.
As they are versions that can differ a little bit each time I update , I prefer to provide a new weekly version - if is possible- and install my modified version over the previous one, only doing Cache and Dalvik Wipe . But always is better a new clean installation.
I hope you like it.
I leave you some pictures soon...
ENIAC .

Screenshots?
Any Bugs?
Is It In Full English Or Some Chinese Included?

Mr.Salman said:
Screenshots?
Any Bugs?
Is It In Full English Or Some Chinese Included?
Click to expand...
Click to collapse
Multilanguage. No bugs. You tell me.

This rom supports f2fs?

austino pele said:
This rom supports f2fs?
Click to expand...
Click to collapse
It should work. Most of CM 12 roms support it.

good battery life?

wil try tenks!

cosenza1914 said:
good battery life?
Click to expand...
Click to collapse
I think so, but let it take some hours to stay, and after first impressions, ( you know, at first, we like to prove all features and may be it will be with screen on ) you will see that in a normal use is quite good.
Cheers.

as I leave the animations list view default ?

So this includes paid apps like Root Explorer ? I don't think that you can share this on here.

newintage said:
So this includes paid apps like Root Explorer ? I don't think that you can share this on here.
Click to expand...
Click to collapse
You're 6 months here and giving advice what can be shared?
There are others who take care of Legal part of posts here and there are 500 Root Explorere..
Enjoy the Rom and don't be silly.

CEPi said:
You're 6 months here and giving advice what can be shared?
There are others who take care of Legal part of posts here and there are 500 Root Explorere..
Enjoy the Rom and don't be silly.
Click to expand...
Click to collapse
good

Work with sm-n900w8?

CEPi said:
You're 6 months here and giving advice what can be shared?
There are others who take care of Legal part of posts here and there are 500 Root Explorere..
Enjoy the Rom and don't be silly.
Click to expand...
Click to collapse
Firstly I'm not here for 6 months. I'm using this forum-portal for 4 years. And just because you are here for years doesn't mean you can play disrespectful. You are here for 9 years but you only have 23 thanks. You still don't know what to share or not, and I can see your threads/posts. You didn't give ANYTHING to this community. You're posting flaming stuff which is full of sh*t, and doesn't mean anything. Make something or shut up.
When it comes to paid or warez apps, yes it's still not allowed on XDA, if you're stealing it.

If you believe a post is against the rules then use the REport button .

It's Multi Dpi?

newintage said:
So this includes paid apps like Root Explorer ? I don't think that you can share this on here.
Click to expand...
Click to collapse
.
Excuse me for not answer before. I did nt see it till now. I must tell about this that i build this rom with free apps you can find in Play Store.
I.m not at home in this moment in order to see If Root Explorer was uploded by error with my paid app. I will see tonight. You must be sure that If i see that is not the free version i will remove it.
Sorry by that If this happened. I don t know. But please, dont give more importance to this. It was not my intention. I never did something wrong in many years through other threads. I always respected the owners, developers or creators of apps, roms or whatever else.
Thanks for your opinions and for share your comments.
You re wellcome.
All the rest of people are wellcome too.
ENIAC

tommyx88 said:
It's Multi Dpi?
Click to expand...
Click to collapse
yes, it is, of course.

ea3aitjr said:
.
Excuse me for not answer before. I did nt see it till now. I must tell about this that i build this rom with free apps you can find in Play Store.
I.m not at home in this moment in order to see If Root Explorer was uploded by error with my paid app. I will see tonight. You must be sure that If i see that is not the free version i will remove it.
Sorry by that If this happened. I don t know. But please, dont give more importance to this. It was not my intention. I never did something wrong in many years through other threads. I always respected the owners, developers or creators of apps, roms or whatever else.
Thanks for your opinions and for share your comments.
You re wellcome.
All the rest of people are wellcome too.
ENIAC
Click to expand...
Click to collapse
I really don't want to be offensive, especially to you. I respect your ROM & Thread. The reason of my post is there are two apps Explorer and Root Explorer. Root Explorer is paid one. And if you didn't ask to dev, it's not free to distribute it.
Of course anyone can distribute free apps. You can even share paid one if you ask to dev. There isn't anything wrong with it. I became disrespectful because that guy trying to offense without any acceptable reason.

hey mate @ea3aitjr
Hopefully a quick question for ya.
What's the kernel you recommend for this? CM or TW base?