Ladies and Gents, please kindly assist. I am using samsung galaxy ace gt s5830, and rooted it and not long ago juz flash a custom rom, now that if i move my apps to sd card, unless games, which so far no prob, those opera, whatsapp and other things i put in sd will either freeze or the phone will just restart if i run them. If i put them in the phone memory then there would be no problem. Can anyone please advise how should this be solved? The internal memory is too few to put most apps in the internal, before i flash the custom rom, there are no such problem. May anyone please help me? Is flashing back it to stock rom will help, if yes, then how may i do it? i saw some thread about using odin, but then are there any ways or things i can install which i just have to put in my sd card then reboot to recovery mode and flash it? just like how i flash the custom rom? all helps are appreciated. Thanks and regards, Have a nice day.
windalchemist said:
Ladies and Gents, please kindly assist. I am using samsung galaxy ace gt s5830, and rooted it and not long ago juz flash a custom rom, now that if i move my apps to sd card, unless games, which so far no prob, those opera, whatsapp and other things i put in sd will either freeze or the phone will just restart if i run them. If i put them in the phone memory then there would be no problem. Can anyone please advise how should this be solved? The internal memory is too few to put most apps in the internal, before i flash the custom rom, there are no such problem. May anyone please help me? Is flashing back it to stock rom will help, if yes, then how may i do it? i saw some thread about using odin, but then are there any ways or things i can install which i just have to put in my sd card then reboot to recovery mode and flash it? just like how i flash the custom rom? all helps are appreciated. Thanks and regards, Have a nice day.
Click to expand...
Click to collapse
The problems you have, IMO, are from your custom ROM. You can try another ROM, don't forget to read others' comments.
If you still want to go back to Stock ROM, you can use Odin:
1. You turn off the phone. Enter download mode (Volume down + Home + Power). When a cell in Odin turns yellow, it's ready.
2. Stock ROMs often come with 1 or 3 files, if 1, put it in PDA, if 3, put them in PDA, CSC and Phone.
3. Press start and wait...
It's easy after you do it several times.
Good luck.
elegyh said:
The problems you have, IMO, are from your custom ROM. You can try another ROM, don't forget to read others' comments.
If you still want to go back to Stock ROM, you can use Odin:
1. You turn off the phone. Enter download mode (Volume down + Home + Power). When a cell in Odin turns yellow, it's ready.
2. Stock ROMs often come with 1 or 3 files, if 1, put it in PDA, if 3, put them in PDA, CSC and Phone.
3. Press start and wait...
It's easy after you do it several times.
Good luck.
Click to expand...
Click to collapse
I flash droid ace version2 that time. at first still OK, but then there are some problems and so I reflash the rom, then it starts to be like this, I even try the droidace version 2.1 but problem still exists. as before won't like that, so I thought it may be my setting prob or something like that. are you using ace too? anyone can suggest some nice custom rom for galaxy ace?
phone freezing after installing custom rom
i have installed foxhound and the codec rom,after rebooting when the phone starts it freezes after some time,i have tried re flashing the rom but its stil the same,how do i fix it?
Related
Hello, please let me know what I'm doing wrong, I've looked exhaustively for a solution to my problem on my own but I can't seem to find one:
1.) Rooted my G2x
2.) Installed Clockwork ROM Manager
3.) Copied two separate Gingerbread ROMs, Cyanogen 7, and Modaco into Root Folder (no sd card, just phone storage)
4.) Tried flashing both Roms multiple times with Rom Manager by both rebooting into recovery and installing from .zip (this option won't display either of the ROMs, just the log file folder.) I have tried installing .zip from SD in ROM Manager, and the phone just reboots as if nothing has happened.
*I believe ROM Manager does have difficulty mounting the phone storage, as it takes a full twenty count before attempting to flash the ROM.
**I don't know if this helps, but I have not received the OTA Gingerbread update from T-Mobile (even when my phone was unrooted), and when I prompt for the OTA update, I receive a "connection error" message. The LG Updater Tool indicates that my phone is "up to date" when it clearly, is Froyo 2.2.2.
Any help would be greatly appreciated with this issue guys, I usually scour forums for answers to my questions or fumble my way through it myself, but this has really sucked out lots of hours from my life.
No external sd card
You have to have a external to flash roms if im not mistaken
when you install recovery there are 2 choices external storage and internal storage if you dont have an sdcard reinstall clockwork using the internal option. that should do the trick for you.
eagle1967 said:
when you install recovery there are 2 choices external storage and internal storage if you dont have an sdcard reinstall clockwork using the internal option. that should do the trick for you.
Click to expand...
Click to collapse
I am going to try with an external SD card. Also, I am unsure of how to flash it to use internal storage, I checked the settings through ROM manager and couldn't find out how to do it. Is this something I access during Recovery mode? Thanks for the suggestions so far guys, I'll definitely post with results.
pathmarkpolice said:
Hello, please let me know what I'm doing wrong, I've looked exhaustively for a solution to my problem on my own but I can't seem to find one:
1.) Rooted my G2x
2.) Installed Clockwork ROM Manager
3.) Copied two separate Gingerbread ROMs, Cyanogen 7, and Modaco into Root Folder (no sd card, just phone storage)
4.) Tried flashing both Roms multiple times with Rom Manager by both rebooting into recovery and installing from .zip (this option won't display either of the ROMs, just the log file folder.) I have tried installing .zip from SD in ROM Manager, and the phone just reboots as if nothing has happened.
*I believe ROM Manager does have difficulty mounting the phone storage, as it takes a full twenty count before attempting to flash the ROM.
**I don't know if this helps, but I have not received the OTA Gingerbread update from T-Mobile (even when my phone was unrooted), and when I prompt for the OTA update, I receive a "connection error" message. The LG Updater Tool indicates that my phone is "up to date" when it clearly, is Froyo 2.2.2.
Any help would be greatly appreciated with this issue guys, I usually scour forums for answers to my questions or fumble my way through it myself, but this has really sucked out lots of hours from my life.
Click to expand...
Click to collapse
I can't quite tell if you used rom manager to flash CWM, but if you did then make sure to use nvflash. I don't know if it could cause things not to work, but it's the only way to guarantee you can always get into recovery. As people have said above, try to use external, although I hadn't read anything about problems with using internal to flash roms, at least if nvflash has been used.
I'll assume you've already heard of wiping/factory reset and all that since you joined a few years back, but make sure to do it when going to a new rom. As for the update issues, I would say just restore stock froyo, maybe from the nandroid tgagunman created if something is wrong with yours, factory reset it just to be careful, unroot using superoneclick, flash stock recovery using tgagunman's one click recovery flasher, and make sure usb drivers are up to date.
If you really can't get the new baseband and roms working after all that... tell t-mobile you can't get the update and ask for a new one haha.
Thanks Guys...
Danish, Eagle, Water, thanks a lot to all of you guys. I was able to flash a new ROM using an External SD card, I'm still having problems finding a ROM that is stable and is compatible with all of the apps I want to use (I'm currently having difficulty installing Tooyoou on the Bionix ROM I downloaded, which is otherwise AWESOME). I mean, it's not that big of a deal, but I'd like to get my extra $2.50 a month from the program.
Oh and NV Flash...
NV Flash helped me when I messed up my G2x's ability to boot into recovery with a Cyanogenmod 7 ROM build. Here's a link to a guide that helped immensely for anyone who finds themselves in this thread with a similar issue:
http://forum.xda-developers.com/showthread.php?t=1056847
Hi all i own a Spice MI 410 phone, i tried to install CM9 custom ROM on it using clock work recovery mod but each time after successful updation my phone doesn't reboot! its stuck at boot screen. If i restore it it runs fine. I really want to install a custom rom please help. I cleared all data, dalvik, cache etc. I even tried it using rom manager where it automatically cleans cache but each time its stuck in boot loop! i am really at lost at what to do whole Saturday of mine was wasted doing this, please guide thanks.
i'm in the same condition like you, still trying to get it right :crying:
kuroroku said:
i'm in the same condition like you, still trying to get it right :crying:
Click to expand...
Click to collapse
Sorry to know, well if you find any solution then do share it here.
1) Are you sure the ROM you downloaded is for your phone?
2) Did you try downloading the ROM again? (You could have gotten a bad download.)
Sounds like a soft brick i had this happen several times. Start up in recovery, restore backed up rom, reboot, redownload the rom you are trying to flash, boot recovery, wipe your cache delv, and factory, than try again. If that doesnt work the rom you downloaded is bad. If you didnt make a recovery, take your SD out put it in your computer, download a rom go it that you know definitely works, put it back in your phone and than juat flash the working rom.
Fixing Permission while in recovery has done miraculous things for me and I did not see that you mentioned that. Also on some devices (HTC namely) if you are not running the right bootloader version some ROM's won't boot, EX running CyanogenMod ROM on hboot 1.58. Search your device forum and see if the answer lies there...and whatever it is that is causing this, once resolved please pot back so that others can learn from your experience.
Well the problem is my phone (Spice CSL MI 410) comes in different models in different countries and even different types like cdma/GSM etc. Its Spice CSL MI 410,Wellcom, Motorola Truimph, Huwaie Ideos X6 etc etc So i don't know if this Rom fits my model as here only Ideos x6 forum is present and i downloaded from there, still i will try to redownload it
I came across a similar problem in the forums with a different samsung model, but the trouble there does not seem to be quite as persistent as my issue. Or at least, no one has posted follow ups in that thread.
I bought the phone on ebay, rooted, and unlocked and it worked for me for a few months beautifully. Then, one day it started acting weird. Programs would randomly crash, or reboot the phone. Rebooting helped for awhile, then didn't help and most of the programs became mostly unusable. One day, the phone hung while booting and I had to force it to shut down, and when it finally loaded properly the screen had reset to factory setup and the home button wouldn't work. Also the wireless had turned off and the date/time setting had changed. Plugging in to the computer using Kies fixed the home button problem, but the trouble with all my apps got worse. And the Tab would crash or reboot (and hang on reloading) even when I wasn't using it. Clearing the caches did not help at all.
I did a factory reset/data wipe (I've done a few now, actually), and that seems to fix the problem for a day or two, then the phone will hang on booting and the screen will have reset. The phone is rooted, but running the original Froyo 2.2 ROM.
Has anyone else run into this problem? I can't return it at this point, and am loathe to replace it since it works properly *most* of the time. I'd like to think this is fixable...and that *I* can fix it (with a little guidance). Any help would be appreciated. Thanks.
The SGT 7.7 originally released with 3.2 GB firmware (no Froyo).
Providing you have no partitions corrupted;
Have a read of the forum stickies and upgrade to a newer official Samsung Android version using Odin. All the guidance you need is able to search, read, and follow instructions etc
You also have choice of other ROMs found in the development section.
1. Custom ICS ROM (Samsung base) stable and working
2. Custom JB ROMs - some features may/may not work, check the thread
Sent from my GT-I9300 using xda premium
Thanks, I'll give that a try. :fingers-crossed:
misspatti said:
Thanks, I'll give that a try. :fingers-crossed:
Click to expand...
Click to collapse
For latest official firmware Odin flashable, check;
samsung-updates.com
or
sammobile.com
Just extract so you have the tar file and flash with Odin. Guides and stickies will tell you how.
Custom ROMs will require a custom recovery, so before flashing custom ROM, make a nandroid backup from within the recovery menu. I personally use TWRP (touch) which is straight forward and easy to use and install. CWM recovery cab be flashed via Odin and requires more use of the volume keysto navigate and power to select.
From power off state:
Download mode = power + volume down (keep pressed until DL mode)
Recovery = power + volume up (keep pressed.. .. .)
Best of luck
Sent from my GT-I9300 using xda premium
Thanks for the suggestion, although full disclosure: I realized after following up on the first response to my original post, that I put this in the wrong forum. I have a Samsung GT-P1000, not a 7.7, and this seems to make things a bit trickier. Especially since I can't seem to get a official firmware upgrade from Samsung (US doesn't show as available country). And I can't dial as I use this only as a tablet with Wifi.
I'll try one of the custom ROMs though, and see if that helps.
As the title says: P5110 keeps rebooting during boot - right after animation stops (before word SAMUNGS starts glowing).
Tablet is rooted and there is CWM 5.5.0.4 installed. Was just fine for almost half a year and all of a sudden this...
I have tried
- wipe data/factory reset
- wipe cache partition
- advanced : wipe Dalvik Cache (whatever that might be?)
I also tried all the "mounts and storage" options and noticed on thing: i can mount all storage mounts (/system, /cache, /data, /efs, /preload, /sdcard) but one - namely /emmc. Does it mean that emmc is broken? What is emmc? Is it important?
I am considering unrooting it and removing CWM. But not sure whether it's even possible and don't dare to try!
Can you tell me anything that might help me debrick this tablet?
Do you have nandroid backup(one that you make with cwm)? If yes go to backup and restore in cwm and hit restore....if not try to reflash rom via cwm or flash stock rom via odin in dowload mode.
emmc is.... http://www.simmtester.com/page/news/showpubnews.asp?num=181
Starojitski said:
As the title says: P5110 keeps rebooting during boot - right after animation stops (before word SAMUNGS starts glowing).
Tablet is rooted and there is CWM 5.5.0.4 installed. Was just fine for almost half a year and all of a sudden this...
I have tried
- wipe data/factory reset
- wipe cache partition
- advanced : wipe Dalvik Cache (whatever that might be?)
I also tried all the "mounts and storage" options and noticed on thing: i can mount all storage mounts (/system, /cache, /data, /efs, /preload, /sdcard) but one - namely /emmc. Does it mean that emmc is broken? What is emmc? Is it important?
I am considering unrooting it and removing CWM. But not sure whether it's even possible and don't dare to try!
Can you tell me anything that might help me debrick this tablet?
Click to expand...
Click to collapse
If you have nandroid backup.. Just restore it.. Or else download a stock firmware and flash it via odin.. gud luck:good:
flash another rom !!
mythi said:
flash another rom !!
Click to expand...
Click to collapse
Sorry to jump on this thread but might be a similar steps the OP has to take.
What if he flashes a new Rom and it still is locked in a strange boot up?
I posted a thread earlier today but either no one has an answer or my thread title was just crappy.
Mine did exactly what his is doing now (just boots the samsung logo and hangs) and now it just boots into recovery everytime you start it.
Flashing an original stock rom didnt fix it.
Flash via Odin any stock ROM then root it and flash whatever you like.
This kind of brick may occur easily if you have flashed uncompatible kernel or tried to restore nandroid backup of another ROM or made by uncompatible CWM recovery version.
Sent from my GT-P5110 using XDA Premium HD app
Solved?
dartd27 said:
Sorry to jump on this thread but might be a similar steps the OP has to take.
What if he flashes a new Rom and it still is locked in a strange boot up?
I posted a thread earlier today but either no one has an answer or my thread title was just crappy.
Mine did exactly what his is doing now (just boots the samsung logo and hangs) and now it just boots into recovery everytime you start it.
Flashing an original stock rom didnt fix it.
Click to expand...
Click to collapse
Normally, it should actually work absolutely fine if you flash a stock ROM via Odin.
Nobody knows what did cause your problems and what did you flash as last. Also, different OS versions use sometimes different partitions. Even CWM recovery is not compatible through all versions, it uses different formatting.
So this way should work to restore stock ROM on your device:
find and download Odin that fits your device (earlier versions are not neccessarily worse ones)
find and download PIT file for your device
find stock ROM for your device consisting 3-files (for PDA, Phone, CSC).... ROMs are usually zipped, so you will get 3 data after extracting
The PIT file will do re-partitions for the case that your formerly installed ROM used different partitions whch are not compatible with the stock ROM.
After that you will have again unrooted stock ROM. So just be careful afterwards whatever you flash and before you do it, make sure that whatever you flash always fits your device (no matter is it whole ROM, kernel or just upgrade).
tetakpatak said:
Normally, it should actually work absolutely fine if you flash a stock ROM via Odin.
Nobody knows what did cause your problems and what did you flash as last. Also, different OS versions use sometimes different partitions. Even CWM recovery is not compatible through all versions, it uses different formatting.
So this way should work to restore stock ROM on your device:
find and download Odin that fits your device (earlier versions are not neccessarily worse ones)
find and download PIT file for your device
find stock ROM for your device consisting 3-files (for PDA, Phone, CSC).... ROMs are usually zipped, so you will get 3 data after extracting
The PIT file will do re-partitions for the case that your formerly installed ROM used different partitions whch are not compatible with the stock ROM.
After that you will have again unrooted stock ROM. So just be careful afterwards whatever you flash and before you do it, make sure that whatever you flash always fits your device (no matter is it whole ROM, kernel or just upgrade).
Click to expand...
Click to collapse
Thank you for the reply. I had posted a link in here that linked to my thread that explained what i had done and used but it didnt show up for some reason? Anyway I used the below roms(in bold). An update was available for JB and we own two tablets both the P5113 and bought at the same time. One tablet updated fine but the other one would download the package but then would keep failing to install it. So i did a factory reset on the device and then that's when the fun began and it started booting strange.
So I first tried flashing the official JB rom using ODin 3.04.
P5113UECLK7 (4.1.1) - Cellular south November 2012 (Official)
and it still did the same thing so then i tried flashing it back to ICS which is the rom that was on there i think. (It was ICS but not sure if that was the exact version number?)
P5113UEBLI1 (4.0.4) - Singapore September 2012 (Official)
Im sure the roms are going on there fine as if im not mistaken ICS has a blue battery charge icon and JB a gold one. I noticed that it went from blue to gold when i first loaded the 4.1.1 on there and then back to blue when i put ICS back on there.
I cant seem to find a PIT file for the P5113. Only for the P5100. Would that work?
I tried it anyway and it didnt work
dartd27 said:
I cant seem to find a PIT file for the P5113. Only for the P5100. Would that work?
Click to expand...
Click to collapse
If I was you, I wouldn't flash it before I am 100% sure it fits the p5113. I own the p5110 and they are indeed very similar, but who knows.... Take care of your Tab, mate.
BTW: why not CM10.1 stable? It works awesome, full wipe/factory reset, install zip through recovery, install recent gapps for CM10.1 (4.2.2) and after boot install Apex launcher and enjoy life
Sent from my amazing i9000 running CM10.1 by pawitp
tetakpatak said:
If I was you, I wouldn't flash it before I am 100% sure it fits the p5113. I own the p5110 and they are indeed very similar, but who knows.... Take care of your Tab, mate.
BTW: why not CM10.1 stable? It works awesome, full wipe/factory reset, install zip through recovery, install recent gapps for CM10.1 (4.2.2) and after boot install Apex launcher and enjoy life
Sent from my amazing i9000 running CM10.1 by pawitp
Click to expand...
Click to collapse
I hear you Its a paper weight right now though so thought id rather try as nothing else is doing the trick.
The tablets are my kids so i preferred to just give them an official stock version. I got put off using custom roms when i used paranoid android on my samsung galaxy 2 and it was real buggy. I just need my devices to work for the basics. I now run stock jelly bean on my GS2 but even that has crappy battery life, lucky for it to make it till 4pm and still be on and thats with moderate use. Couple of phone calls and a few text messages and a tiny bit or browsing. I know what is causing it though as it only starts to lose battery when im not on wi fi. It at least doesnt freeze and stop receiving phone calls altogether like PA did though. I used to miss a ton of work calls because the phone had actually frozen.
I love Apex though. I have Apex pro on my GS2 and its much better then the standard launcher. My daughter has the GS3 and it still does not rotate on the home and app screens which i find annoying.
dartd27 said:
I got put off using custom roms when i used paranoid android on my samsung galaxy 2 and it was real buggy. I just need my devices to work for the basics.
Click to expand...
Click to collapse
I've got your point, mate. :good:
Same with me: I need all the functions to work. The CM10.1 does it really, but my p5110 is wifi-only device so I'm not sure if CM10.1 is same good for your p5113. CM10.2 seems to be smooth and fast, but many apps aren't yet updated for 4.3 so I will wait a while before I flash it again.
I have cm10.1 on my p5113...it runs amazing...the p5113 owners most of the time have to flash the p5110 version because there is nothing different with the tabs besides the ir port..
Sent from my GT-P5110 using xda app-developers app
help me
hello guys,
i have the same problem with my p3100
in my case i cannot connect my tablet to my laptop and it is always looping
i already install the driver, odin, and kies
i already root my tablet
can anyone help me please??
obeye said:
hello guys,
i have the same problem with my p3100
in my case i cannot connect my tablet to my laptop and it is always looping
i already install the driver, odin, and kies
i already root my tablet
can anyone help me please??
Click to expand...
Click to collapse
Can you describe it bit more precised, mate? Don't panic, so far it doesn't sound so bad....
tetakpatak said:
Can you describe it bit more precised, mate? Don't panic, so far it doesn't sound so bad....
Click to expand...
Click to collapse
okay, thanks mate
the problem is my tab always looping whenever I turn it off
I already try wipe at CMW mode,
but it is always restart and nothing happen and its still looping
I already try install the OS, but its aborted
i trying to flash it with Odin, but my laptop cannot read my tab
its been 3 day my tab cannot turn on
obeye said:
okay, thanks mate
the problem is my tab always looping whenever I turn it off
I already try wipe at CMW mode,
but it is always restart and nothing happen and its still looping
I already try install the OS, but its aborted
i trying to flash it with Odin, but my laptop cannot read my tab
its been 3 day my tab cannot turn on
Click to expand...
Click to collapse
Can you reach the download mode? (press 2 buttons at same time: volume down and power button)
OK, yes- you need same Odin version as Tabs 51xx, this is link for Odin 3.07:
http://hotfile.com/dl/161620048/6c6d559/Odin3_v3.07.rar.html
Try pressing the buttons with the charger plugged in, as well as plugged out, that is little trick with the p51xx Tabs
tetakpatak said:
Can you reach the download mode? (press 2 buttons at same time: volume down and power button)
OK, yes- you need same Odin version as Tabs 51xx, this is link for Odin 3.07:
Try pressing the buttons with the charger plugged in, as well as plugged out, that is little trick with the p51xx Tabs
Click to expand...
Click to collapse
Thanks mate!
already done!!
its work!
thank you so much!!
obeye said:
Thanks mate!
I already install ROM JB on my tab
but its still looping in samsung logo,
i read that i should install CWM, but when i install it, it says that "verification failed"
what should i do??
Click to expand...
Click to collapse
Great, I am glad to hear it did charger cable trick help?
Just to make sure: you must be sure to flash a stock ROM first (not JB based custom ROM), after it you will have revived Tab without root. After that normal proceeding: root it, install CWM recovery or custom kernel that fits your ROM (or even whole custom ROM) which already features the CWM recovery.
The stock recovery (3e) checks the signature so of course you can't flash any custom zips. CWM recovery has an option "toggle signature verification" where one can disable signature check. Then you can flash whatever you want, just take care that all you ever flash must be absolutely compatible for your device.
---------- Post added at 03:45 PM ---------- Previous post was at 03:21 PM ----------
obeye said:
Thanks mate!
I already install ROM JB on my tab
but its still looping in samsung logo,
i read that i should install CWM, but when i install it, it says that "verification failed"
what should i do??
Click to expand...
Click to collapse
One more thing mate, look at this video which I've posted on YouTube last January:
http://www.youtube.com/watch?v=0NXBN9Z63TY
It describes how to get rid of the signature verification problem. For the reason that quite many people don't understand english well, I have made a speechless video added by step by step description in the text (video description) so people can just copy the text and paste it into their translators.
If one ROM that you have flashed bootloops on the logo just try another ROM. It happens sometimes. Important is that you should always before flashing another ROM make full wipe: (data/factory reset/cache/dalvik) in your recovery mode.
Did you do it?
Please let me know if you were successful, it should work now! Good luck :fingers-crossed:
It works!
Thanks everyone for your feedback!!!
and my apologies for late response.
I followed the advise to (re)flash stock rom and it worked!
After that i rooted it again, installed another recovery and now have the latest stock rom working perfectly.
For those who get the same problem and the tabled keeps rebooting - just plug it into recharger and keep the on/off button until it turns off. Then you can fully charge it before you attempt to flash rom.
Once again, thanks a lot!
PS. now i am considering installing CM10.1
Starojitski said:
Thanks everyone for your feedback!!!
and my apologies for late response.
I followed the advise to (re)flash stock rom and it worked!
PS. now i am considering installing CM10.1
Click to expand...
Click to collapse
Great! Congratulations
Yes, install CM10.1.1 with gapps for 4.2.2 it works great, all the functions. Just mind that you can not restore nandroid backups made with other kernel, (sometimes also not if done with older CWM recovery version) and also apps backups made by Titanium backups in older systems aren't good idea to restore once you upgrade to CM10x
If you want to return for any reason to your old (current) ROM, do the same procedure like by unbricking
Hi, I have a big problem with my Galaxy S SCL i9003.
From last week everything was working good, but something happened.
The camera stop working. Hours and hours searching and I find the solution but I need root.
Ok, I make root and surprise, the phone doesn't want to exit from CWM Recovery.
I tried installing ROMs, and the f*cking recovery won't let me do it. I tried with a ROM from a Spanish forum, it was installed all correctly and then another time, the damned recovery.
I tried to install a lot of ROMs, a lot of things from XDA-Developers, now even won't let me to install any ROM.
I do with Odin several times reflashing with original FW and it works by the way... But I need to be root to make my camera work, because I need to replace some system files :crying: :crying: :crying:
Please, what can I do ?!? If I root with Odin everytime my phone won't exit from recovery and the damn recovery even let me install a rom, so I need another time to flash to original FW and well... I can use the phone but I can't use the camera :crying: :crying:
¿What can I do? I tried with 3 different recoveries, all of them are quite old (the newest is from 2012) and I want to know if exists an newer version for my phone. I need to root it, but if I try everytime with Odin and do all good, everytime my phone bricks in Recovery. Whatever I do it's the same... it doesn't exit from recovery mode until I flash to stock FW.
Big thanks in advice. :good:
If you flash stock rom and the camera still dont work i think is hardware problem related. Fresh installation of Stock rom should fix All software related problems.
acuicultor said:
If you flash stock rom and the camera still dont work i think is hardware problem related. Fresh installation of Stock rom should fix All software related problems.
Click to expand...
Click to collapse
Hi friend thx for the reply, the thing is that im on stock rom and all goes good, but the problem is I want to root it to solve the camera problem.
I searched on the web and several i9003 and i9001 have this issue when they're updating or when they've been updated... I can solve it changing some files on system but I can't have root access :crying:
I think your problem is related to recovery.
You can flash Bam Kernel via Odin. I'm
using it. Download the latest fix version and
flash it in pda. It has CWM & it will root the
device.
http://forum.xda-developers.com/showthread.php?t=1355675