Since I've gotten my Sidekick, I've noticed on most ROMs a horrible tendency to not register key-presses on the physical keyboard. There was one ROM early on that didn't do this (or very little) and one of the versions of RAGE was very good. I'm running GOV3.2 Bulky right now and it's not horrible, but it's noticeable. Does anyone have an idea of what might cause this? Thanks.
ged92781 said:
Since I've gotten my Sidekick, I've noticed on most ROMs a horrible tendency to not register key-presses on the physical keyboard. There was one ROM early on that didn't do this (or very little) and one of the versions of RAGE was very good. I'm running GOV3.2 Bulky right now and it's not horrible, but it's noticeable. Does anyone have an idea of what might cause this? Thanks.
Click to expand...
Click to collapse
I thought my keyboard was going bad or i just did not press the key all the way, now im on stock and i have not had that issue, hope someone finds the rom
ultraprimeomega said:
I thought my keyboard was going bad or i just did not press the key all the way, now im on stock and i have not had that issue, hope someone finds the rom
Click to expand...
Click to collapse
I wonder what the issue is that's causing it to show up on custom ROMs. Though, I've had it on the stock ROMs as well.
Have you tried this version of the kernel? Along with the removal of the keystroke logger, it also contains a patch that allows you to lower the keystroke timer delays... If you are experiencing dropped keystrokes, this could help, as the patch was designed for tht very issue.
http://forum.xda-developers.com/showthread.php?t=1663622
yogi2010 said:
Have you tried this version of the kernel? Along with the removal of the keystroke logger, it also contains a patch that allows you to lower the keystroke timer delays... If you are experiencing dropped keystrokes, this could help, as the patch was designed for tht very issue.
http://forum.xda-developers.com/showthread.php?t=1663622
Click to expand...
Click to collapse
Thank you!!!!!!!! I went ahead and dug into that thread. I do have that kernel already on my phone. I looked at the thread linked in that thread that gives a patch to adjust the timer delay and column delay in the kernel. HOWEVER, I'm not knowledgeable enough to apply that patch to my phone as it's given. Elsewhere in that thread, someone gave the commands to edit the settings manually through a terminal which I did through Android Commander on my PC and it worked wonders! Being the suspicious type, I guessed that the settings might not keep after a reboot. Unfortunately, that is the case and I had to reapply the settings after my phone finished restarting. So, I'll have to play with this a bit more to get it to keep, but thank you for showing me this!
You're welcome! That patch was made just for this issue. And yeah, it doesn't stick after a reboot, so we could either compile the kernel with chosen settings added in, or make a simple init.d script. I never did either one lol, was too lazy to try editing and building the kernel from source, and was on the stock ROM so I thought maybe it had no init.d support. You could probably create a file with those same commands used in Terminal, and throw it in your init.d folder to change the settings at boot.
yogi2010 said:
You're welcome! That patch was made just for this issue. And yeah, it doesn't stick after a reboot, so we could either compile the kernel with chosen settings added in, or make a simple init.d script. I never did either one lol, was too lazy to try editing and building the kernel from source, and was on the stock ROM so I thought maybe it had no init.d support. You could probably create a file with those same commands used in Terminal, and throw it in your init.d folder to change the settings at boot.
Click to expand...
Click to collapse
I set my column delay to 30 and my timer delay to 1 and it now feels like I'm typing on a Sidekick again! I wouldn't know how to correctly compile the kernel myself with these settings changed. So, are there any devs out there willing to make a zip that can be flashed in CWM so these settings will become permanent?
ged92781 said:
I set my column delay to 30 and my timer delay to 1 and it now feels like I'm typing on a Sidekick again! I wouldn't know how to correctly compile the kernel myself with these settings changed. So, are there any devs out there willing to make a zip that can be flashed in CWM so these settings will become permanent?
Click to expand...
Click to collapse
+1
I've noticed this problem and thought it was just me :$
I've had this happen as well as my screen thinking I was pressing it in one location when I wasn't even touching the phone. :s Had me at my wits end.
Sent from my SGH-T839 using xda premium
To those interested in the commands I used to fix the keyboard, see below. If you reboot your phone, these settings will go away and you will need to input these commands again. For a permanent fix, someone will need to add them to a kernel that can be flashed. To use these commands, your phone must be rooted. I've successfully used Android Commander to enter these commands from my PC while my phone is connected via USB.
The current timer delay may be read with:
cat /sys/devices/platform/s3c-keypad/timer_delay
The default is 5 if I remember correctly.
A new timer delay may be set with:
echo 1 > /sys/devices/platform/s3c-keypad/timer_delay
The default 300 µs column delay value may be read with:
cat /sys/devices/platform/s3c-keypad/column_delay
A new delay may be set with:
echo 30 > /sys/devices/platform/s3c-keypad/column_delay
In either command, you may experiment with different values by changing the 1 or the 30 in either command to what you want. I believe the lowest is 1 and the max is 256 for the timer delay. If you damage your phone running these commands, that's on you. I'm just telling you what I did and feel worked for me. YMMV. Also, if you don't want to connect your rooted phone to your PC and want to use Terminal Emulator from the Play store, that will work too. You need to enter 'su' prior to running the above commands and grant the terminal super user permissions for the commands to take.
ged92781 said:
I set my column delay to 30 and my timer delay to 1 and it now feels like I'm typing on a Sidekick again! I wouldn't know how to correctly compile the kernel myself with these settings changed. So, are there any devs out there willing to make a zip that can be flashed in CWM so these settings will become permanent?
Click to expand...
Click to collapse
I'll work on it for the next releases of the Bi-Winning roms and also try to attach flashable zips.
RicAndroid said:
I'll work on it for the next releases of the Bi-Winning roms and also try to attach flashable zips.
Click to expand...
Click to collapse
Thank you!
ged92781 said:
Thank you!
Click to expand...
Click to collapse
You are very welcome! All done, BTW. Posting my updates now.
Permanent Fix(Manual way)
Taking the timer_delay and column_delay tricks shown above...I was able to make an init.d script(pretty easy, tbh) but don't feel it merits an update.zip since it's so easy. What I did was:
1. go to /etc/init.d
2. find the last script(In GOV3.3 it's 18complete) and rename it - adding one to the sequence(In my case I renamed it to 19complete)
3. make a new file name 18keyboardfix(The number depends on your rom, really...like if you renamed the above file to some thing like 33complete, you'd call this 32keyboardfix. Easy? right?)
4. Open the file you just created and put:
Code:
!#/system/bin/sh
echo 1 > /sys/devices/platform/s3c-keypad/timer_delay
echo 30 > /sys/devices/platform/s3c-keypad/column_delay
5. Set the permissions to rwxr-xr-x or whatever the numeric equivalent is. (0755, iirc)
6. Reboot
7. (Optional) Recheck the values with the following commands:
Code:
cat /sys/devices/platform/s3c-keypad/timer_delay
Code:
cat /sys/devices/platform/s3c-keypad/column_delay
I take no credit for this fix. Really, it was all ged92781 for providing the commands. All I did was find a way to make it permanent(Well, it's just reset when the devices is turned off and the init.d scripts set it back to you desired values, but that's debatable on whether it's permanent or not...either way...it works and is a simple fix)
SammaelAkuma said:
Taking the timer_delay and column_delay tricks shown above...I was able to make an init.d script(pretty easy, tbh) but don't feel it merits an update.zip since it's so easy. What I did was:
1. go to /etc/init.d
2. find the last script(In GOV3.3 it's 18complete) and rename it - adding one to the sequence(In my case I renamed it to 19complete)
3. make a new file name 18keyboardfix(The number depends on your rom, really...like if you renamed the above file to some thing like 33complete, you'd call this 32keyboardfix. Easy? right?)
4. Open the file you just created and put:
Code:
!#/system/bin/sh
echo 1 > /sys/devices/platform/s3c-keypad/timer_delay
echo 30 > /sys/devices/platform/s3c-keypad/column_delay
5. Set the permissions to rwxr-xr-x or whatever the numeric equivalent is. (0755, iirc)
6. Reboot
7. (Optional) Recheck the values with the following commands:
Code:
cat /sys/devices/platform/s3c-keypad/timer_delay
Code:
cat /sys/devices/platform/s3c-keypad/column_delay
I take no credit for this fix. Really, it was all ged92781 for providing the commands. All I did was find a way to make it permanent(Well, it's just reset when the devices is turned off and the init.d scripts set it back to you desired values, but that's debatable on whether it's permanent or not...either way...it works and is a simple fix)
Click to expand...
Click to collapse
Uh, oh....I used echo "number" /proc/sys/devices/platform/s3c-keypad in my script. Will I have to change it?
RicAndroid said:
Uh, oh....I used echo "number" /proc/sys/devices/platform/s3c-keypad in my script. Will I have to change it?
Click to expand...
Click to collapse
Idk, honestly. Try and see if your script works first, if not, then use the one I made using the commands ged92781 provided. Now...to find a way to fix the spaztic touch screen...that'll be tricky.
SammaelAkuma said:
Idk, honestly. Try and see if your script works first, if not, then use the one I made using the commands ged92781 provided. Now...to find a way to fix the spaztic touch screen...that'll be tricky.
Click to expand...
Click to collapse
I'm using your commands, dude. I'm very into details....so thanks!
RicAndroid said:
I'm using your commands, dude. I'm very into details....so thanks!
Click to expand...
Click to collapse
Lol. No problem. And good luck with the custom rom cooking.
Related
Has any hero users actually got this working and is it making things better?
http://forum.xda-developers.com/showthread.php?t=622666
did you read the thread???
its a working tweak, you just have to do it yourself. But some are working on an app.
coffe34 said:
did you read the thread???
its a working tweak, you just have to do it yourself. But some are working on an app.
Click to expand...
Click to collapse
Yeah I have it on mine but I don't really notice a difference. I think it's because I'm running AOSP though which doesnt dip me too low in mem. If I was running sense I would probably notice it more.
More importantly are any of the developers planning on putting this code into there next rom, so we can just flash the new rom and already have our internal task killers configured for optimal performance?
Yup, I've added this to Fresh 1.1 and there's definitely a noticeable improvement. It's quite snappier and less laggy. I went back and forth to stock settings and more aggressive settings to test it out and can notice the difference after loading a few apps.
I haven't tested it out on any AOSP builds yet but plan to do so when I get some time.
black7 said:
Yup, I've added this to Fresh 1.1 and there's definitely a noticeable improvement. It's quite snappier and less laggy. I went back and forth to stock settings and more aggressive settings to test it out and can notice the difference after loading a few apps.
I haven't tested it out on any AOSP builds yet but plan to do so when I get some time.
Click to expand...
Click to collapse
black7 what settings are you running? I'm currently at: 1536,2048,4096,5120,8192,10240
haven't had much time to play with it yet. Wondering what you are finding works best on Android 1.5
coffe34 said:
did you read the thread???
its a working tweak, you just have to do it yourself. But some are working on an app.
Click to expand...
Click to collapse
Yep I read it but wanted to tripple check before I started messing around with scripts, I'm confused with the editing, but I'm gonna have a go at it. Just wanted to see if it was worth the effort.
Ok, so after looking and searching I can't seem to find this answer so hopefully someone may be able to point me in the right direction. I have updated the values of the memory killer, and I even followed the instructions to pull, edit and push the compcache.sh file back but after rebooting I still get the stop values when I run the command
# cat /sys/module/lowmemorykiller/parameters/minfree
This is my edited file...
/system/xbin/insmod /system/lib/modules/lzo_decompress.ko
/system/xbin/insmod /system/lib/modules/lzo_compress.ko
/system/xbin/insmod /system/lib/modules/xvmalloc.ko
/system/xbin/insmod /system/lib/modules/ramzswap.ko disksize_kb=131072
/system/xbin/swapon /dev/block/ramzswap0
echo "10" > /proc/sys/vm/swappiness
echo "1536,3072,4096,21000,23000,25000" > /sys/module/lowmemorykiller/parameters/minfree
Its not a big problem cause I can do it manually everytime I reboot, but I would like to have it initialize on its on at startup but something is not correct. Anyone have an idea of where I went wrong?
All I can say is... HOLY MONKEY!! Works great on 1.6. I uninstalled taskpanel and this thing is seriously screaming!
swaze said:
Ok, so after looking and searching I can't seem to find this answer so hopefully someone may be able to point me in the right direction. I have updated the values of the memory killer, and I even followed the instructions to pull, edit and push the compcache.sh file back but after rebooting I still get the stop values when I run the command
# cat /sys/module/lowmemorykiller/parameters/minfree
This is my edited file...
/system/xbin/insmod /system/lib/modules/lzo_decompress.ko
/system/xbin/insmod /system/lib/modules/lzo_compress.ko
/system/xbin/insmod /system/lib/modules/xvmalloc.ko
/system/xbin/insmod /system/lib/modules/ramzswap.ko disksize_kb=131072
/system/xbin/swapon /dev/block/ramzswap0
echo "10" > /proc/sys/vm/swappiness
echo "1536,3072,4096,21000,23000,25000" > /sys/module/lowmemorykiller/parameters/minfree
Its not a big problem cause I can do it manually everytime I reboot, but I would like to have it initialize on its on at startup but something is not correct. Anyone have an idea of where I went wrong?
Click to expand...
Click to collapse
read the original thread again it says right in there that it will not be there after a reboot that you will have to go back in and do it again.
wtphoto said:
read the original thread again it says right in there that it will not be there after a reboot that you will have to go back in and do it again.
Click to expand...
Click to collapse
If you put the values in compcache.sh will it re echo the values on reboot? It seems to be doing that on my phone.
ljmeli said:
Actually putting it in compcache.sh will re echo the values on reboot.
Click to expand...
Click to collapse
Right, the original thread clearly shows the steps to make it initialize on reboot, but its not working for me for some reason.
It isn't working for me either. I edited compcache.sh exactly as shown and it isn't working for me. I also tried creating a new file and placing the command in it and having that run on startup, no luck there either.
I'm surprised this thread isn't more popular. This is the best tweak ever.
I pulled compcache.sh and added
echo "1536,3072,4096,21000,23000,25000" > /sys/module/lowmemorykiller/parameters/minfree
pushed it back rebooted and its still in compcache.sh
notrock said:
I pulled compcache.sh and added
echo "1536,3072,4096,21000,23000,25000" > /sys/module/lowmemorykiller/parameters/minfree
pushed it back rebooted and its still in compcache.sh
Click to expand...
Click to collapse
Huh? It's supposed to still be in there...
Tikerz said:
Huh? It's supposed to still be in there...
Click to expand...
Click to collapse
I know. I thought the OP was saying it wasn't on his.
The "right" way to do this is use the perl scripts from Lox (I believe) and edit the init.rc in the ramdisk. I can't post links, but search the forums for them.
The line that provides the default values is in this file and you can simply change the numbers. For a quick and dirty hack you need to be using MoDaCo's init.rc and have his script in the file tree.
Don't edit the ramzswap file in windows without a true text editor and don't change the file permissions if your using linux.
I've built this into the Gumbo Kernel and started a dev thread here to work on getting it in the init rc natively as a first step in our own community kernel, but like i said, can't post links.
gbhil said:
The "right" way to do this is use the perl scripts from Lox (I believe) and edit the init.rc in the ramdisk. I can't post links, but search the forums for them.
The line that provides the default values is in this file and you can simply change the numbers. For a quick and dirty hack you need to be using MoDaCo's init.rc and have his script in the file tree.
Don't edit the ramzswap file in windows without a true text editor and don't change the file permissions if your using linux.
I've built this into the Gumbo Kernel and started a dev thread here to work on getting it in the init rc natively as a first step in our own community kernel, but like i said, can't post links.
Click to expand...
Click to collapse
Curious, will the Gumbo kernel work with the AOSP builds, specifically 1.6? I was trying to add this to my init.rc but couldnt get it to work with Droid Explorer, and for some reason adb wasnt recognizing push to the / directory.
katmandu421 said:
Curious, will the Gumbo kernel work with the AOSP builds, specifically 1.6? I was trying to add this to my init.rc but couldnt get it to work with Droid Explorer, and for some reason adb wasnt recognizing push to the / directory.
Click to expand...
Click to collapse
No it wont. I've already requested some files from some one currently running it though. Details in other thread.
You can't write to / . That's why you can't just push init.rc in. It comes from the ramdisk image.
http://forum.xda-developers.com/showthread.php?t=921530
THIS WORKS on the Aria. BIG DIFFERENCE!
akira02rex said:
http://forum.xda-developers.com/showthread.php?t=921530
THIS WORKS on the Aria. BIG DIFFERENCE!
Click to expand...
Click to collapse
I just tried this, and it appears that the tweak to the file makes a difference in speed tests.
I'm trying to get my hands around how to actually test it in real-world situations.
So for CM7 - this would definitely be a nice addition to this already excellent ROM...
akira02rex said:
http://forum.xda-developers.com/showthread.php?t=921530
THIS WORKS on the Aria. BIG DIFFERENCE!
Click to expand...
Click to collapse
This should have been posted in the CM7 thread. Why start a new one?
Here is a flashable zip that will add the fix to an init.d script and will survive reboot. It checks to see if the value is 4, and if so changes it to 128. You have to apply it after each new rom flash.
This can be tested with adb pull.
Pull it with the setting at 4. pull pack the cm rom to a local folder. you will get speed stats. after the first pull, set the param to 128. pull again.
syntax from adb: adb shell echo 128 > /sys/devices/virtual/bdi/179:0/read_ahead_kb
from terminal - just skip the adb.
one note, I tried this on my Aria - it broke adb transfers. Then I tried it again and it worked.
Before I add this to CM, I want to make sure it's reliable.
The gallery loads even faster.
Sent from my Liberty using XDA App
attn1 said:
This can be tested with adb pull.
Pull it with the setting at 4. pull pack the cm rom to a local folder. you will get speed stats. after the first pull, set the param to 128. pull again.
syntax from adb: adb shell echo 128 > /sys/devices/virtual/bdi/179:0/read_ahead_kb
from terminal - just skip the adb.
one note, I tried this on my Aria - it broke adb transfers. Then I tried it again and it worked.
Before I add this to CM, I want to make sure it's reliable.
Click to expand...
Click to collapse
Im at 128 with the update.zip I posted above, and I can adb pull and push to my hearts content. I am on nightly 18 BTW.
bkmo said:
Im at 128 with the update.zip I posted above, and I can adb pull and push to my hearts content. I am on nightly 18 BTW.
Click to expand...
Click to collapse
the correct way is to add it to init.rc - that's when I had a failure. but the failure is not consistent.
bkmo said:
This should have been posted in the CM7 thread. Why start a new one?
Here is a flashable zip that will add the fix to an init.d script and will survive reboot. It checks to see if the value is 4, and if so changes it to 128. You have to apply it after each new rom flash.
Click to expand...
Click to collapse
On cm, if you want to preserve an init script, you can do anyone of the following:
Save it in /sd-ext/userinit.d/
Save it as /sd-ext/userinit.sh
Save it as /data/local/userinit.sh
Use cm's backuptool, it runs on rom installation. Just save its path (without the leading "/system/") into /system/etc/custom_backup_list.txt
Code:
etc/init.d/04sdcardspeedfix
Apparent improvement
Just flashed the above posted zip on CM7 Nightly 18 - seems to be a dramatic improvement, at least in stats, on my cheapie class 6 card:
before update: Write 5 / Read 6
after update: Write 4 / Read 12
I did not conduct this test at all scientifically - just ran one speed test before and one after the update, so take it for what it's worth I guess...just figured I'd share.
attn1 said:
the correct way is to add it to init.rc - that's when I had a failure. but the failure is not consistent.
Click to expand...
Click to collapse
I have it running as an init.d script and cannot make it fail. I do see this tweak posted in a lot of different forums.
Looks like this thread is now dead. This has been commited to cm7.
bkmo said:
Looks like this thread is now dead. This has been commited to cm7.
Click to expand...
Click to collapse
I dont quite understand. This last change set it back to 4? We still gotta manually change it? Or that's just the MIN value?
Darius_bd said:
I dont quite understand. This last change set it back to 4? We still gotta manually change it? Or that's just the MIN value?
Click to expand...
Click to collapse
The last commit is making a correction for the nand flash after the sd commit changed all memory readahead to128.
.
Gotcha, thanks for the clear up
bkmo said:
The last commit is making a correction for the nand flash after the sd commit changed all memory readahead to128.
Click to expand...
Click to collapse
Correct! The changes will be built in tonight's nightly.
Have anyone who can build boot.img already flashed the new kernel files? Is Wi-Fi broken? Or just me?
Sent from my Liberty using XDA App
EDIT: sorry... my bad, it's my typo of modules folder
I am wanting to write a script to change my UV without using Voltage Control, but I have no idea how. Could someone point me to instructions, or possibly write it for me? Thanks in advance.
sixstringsg said:
I am wanting to write a script to change my UV without using Voltage Control, but I have no idea how. Could someone point me to instructions, or possibly write it for me? Thanks in advance.
Click to expand...
Click to collapse
voltage control will write the scrpit and put it in the /system/etc/init.d directory but you need to set that directory to read/write, i use root explorer for this. you can view the script in a text editor via root explorer and you will see what it is doing if you want to mimic it.
Dani897 said:
voltage control will write the scrpit and put it in the /system/etc/init.d directory but you need to set that directory to read/write, i use root explorer for this. you can view the script in a text editor via root explorer and you will see what it is doing if you want to mimic it.
Click to expand...
Click to collapse
But isn't that just the boot settings? Or are the apply now settings there too? I'm trying to change it with tasker.
sixstringsg said:
But isn't that just the boot settings? Or are the apply now settings there too? I'm trying to change it with tasker.
Click to expand...
Click to collapse
oh, mis understood. ok then what is wrong with using voltage control?
ill look into it. not sure off the top of my head,
edit: wait what am i saying i know this. the script is the same. putting it in init.d just is a place to make the phone run it on boot. you can copy that script anywhere and edit it for alternate setting and execute it yourself.
Dani897 said:
oh, mis understood. ok then what is wrong with using voltage control?
ill look into it. not sure off the top of my head,
edit: wait what am i saying i know this. the script is the same. putting it in init.d just is a place to make the phone run it on boot. you can copy that script anywhere and edit it for alternate setting and execute it yourself.
Click to expand...
Click to collapse
Ok sweet. I want it in tasker because I cant UV as much when its plugged in without CD, so I then could lower the UV when it's plugged in, then raise when unplugged. Thank you!
Sent from my CM7 powered captivate
Well I have the script done, but now I don't know how to make tasker run it as root...
Sent from my CM7 powered captivate
there is or used to be an application called sl4a (scripting layer for android) i dont know where to get it but there is a market app called scripter that is essencially the same. if you put the script on the sd card and import it into scripter and it will give you the ability to shortcut to it, you can use taster to open the shortcut automatically under whatever situation you are changing settings or just put the shortcut on the desktop and open it like an application. you should be able to give scripter su permissions to run it. scripter is nice to have because it also adds a support for all file extensions to android. any file extension that doesnt run in another app will just be tagged as a scripter file so you can download any file type in the stock browser of send and recieve them in mms and email with the stock apps.
also i dont know much about scripting, im still learning. i understand the commands and this one is simple just echos some numbers into configuration files, but im not sure of what can be used within the script. it may be possible to add an su command at the start of the script or start each command "sudo". not sure though, if this doesn't work then scripter is definately the way to go.
after years of windows i am more comfortable with a gui that a terminal window, but i get by.
I don't see a way to create a shortcut to my script in scripter....
oh sorry i was mistaken. you can do it in launcher pro activities i thought it shows in shortcuts but i was wrong. im not sure if tasker can use launcher pro activities. let me see if there is an alternate way. did you try putting su in the script and see if that works?
Dani897 said:
oh sorry i was mistaken. you can do it in launcher pro activities i thought it shows in shortcuts but i was wrong. im not sure if tasker can use launcher pro activities. let me see if there is an alternate way. did you try putting su in the script and see if that works?
Click to expand...
Click to collapse
When I tried launcher pro activities, it force closed anyway. And I tried su once, but ill try again.
Edit: yeah, su doesnt work. And tasker doesn't return errors when something fails. I have to check voltage control to see if it worked.
Sent from my CM7 powered captivate
sorry. about that, search google for sl4a. that is what tasker expects you to have when you launch scripts anyway. that is why it wants you to have the script in /sdcard/sl4a/scripts
i would assume sl4a would work better in combinations with tasker. hope that it works! ill try to find it.
running the script from the stock file manager or some other meathods will run scripter and ask for su permissions but i have been trying it as well to see what trouble you are having and for some reason when the script is started by tasker scripter doesn't get launched. i assumed it would work because in most situations scripter acts just like sl4a but in this case i was wrong.
edit: here is sl4a http://code.google.com/p/android-scripting/
trying it now
Dani897 said:
sorry. about that, search google for sl4a. that is what tasker expects you to have when you launch scripts anyway. that is why it wants you to have the script in /sdcard/sl4a/scripts
i would assume sl4a would work better in combinations with tasker. hope that it works! ill try to find it.
running the script from the stock file manager or some other meathods will run scripter and ask for su permissions but i have been trying it as well to see what trouble you are having and for some reason when the script is started by tasker scripter doesn't get launched. i assumed it would work because in most situations scripter acts just like sl4a but in this case i was wrong.
Click to expand...
Click to collapse
Yeah, I found that app. Thanks for all the help! We'll get it eventually.
Sent from my CM7 powered captivate
not working for me. sl4a force closes. i dont know how to get it to use super user, it may need something in the script or maybe there is a super user version, or maybe it is just out dated and doesn't work in froyo. im not really sure. im about to talk to my brother who knows all about bash scripts in linux and sh scripts are similar. maybe he has an idea. unfortunately he doesn't have an android phone but if he did he would be the person to ask.
Yeah, it keeps fcing on me too... I don't know.
Sent from my CM7 powered captivate
It is working for me. I had to wait a while at first for a permission request for anonymous user data... also it could be that you already have a folder made. it gave me an error saying that it could not gain permission to add the folder to my sdcard. I think this might be because I have sdext and a2ext... maybe...
Sent from my HTC Vision using XDA Premium App
TheNewGuy said:
It is working for me. I had to wait a while at first for a permission request for anonymous user data... also it could be that you already have a folder made. it gave me an error saying that it could not gain permission to add the folder to my sdcard. I think this might be because I have sdext and a2ext... maybe...
Sent from my HTC Vision using XDA Premium App
Click to expand...
Click to collapse
Is it working for you with tasker? And I already accepted the anonymous user data prompt.
Sent from my CM7 powered captivate
No clever scripter/tasker people know how?
Sent from my CM7 powered captivate
sixstringsg said:
No clever scripter/tasker people know how?
Sent from my CM7 powered captivate
Click to expand...
Click to collapse
In case anyone was wondering, you can use the script locale plugin and it works wonderfully.
Sent from my CM7 powered captivate
What is zipalign, what are the benefits of zipalign and how do i do this?
Thank you
60 views but 0 replies
Someone help me please
just use the search option
EdisDee said:
just use the search option
Click to expand...
Click to collapse
I find just one thread with the same question and that thread also has only 2 posts and the person who made the thread posted saying he found the answer but never mentions what the answer is.
I found something about placing a file in the init.d folder but the file was not specified so if anyone has the file in their init.d folder could they copy it to their sd card, upload it to dropbox or any other file share website and share it with me please.
Help please
I know this is bloody perfect forum but sometimes you just need to jump out for a while. It's easier.
"The Android SDK includes a tool called zipalign that optimizes the way an application is packaged. Running zipalign against your application enables Android to interact it more efficiently at run time and thus has the potential to make it and the overall system run faster. We strongly encourage you to use zipalign on both..."
source: http://developer.android.com/resources/articles/zipalign.html
Enable? Nor sure. Kyrillos has it by default. I don't remember about others...
EDIT: Remove ".TXT" and place in /etc/init.d (or /system/etc/init.d). I belive it should be enoguh but can't say for sure. I only hope Kyrillos will not mind, it is from his 8.1 rom. Or hillbeast who edited it to work with hybrid.
mrvek said:
I know this is bloody perfect forum but sometimes you just need to jump out for a while. It's easier.
"The Android SDK includes a tool called zipalign that optimizes the way an application is packaged. Running zipalign against your application enables Android to interact it more efficiently at run time and thus has the potential to make it and the overall system run faster. We strongly encourage you to use zipalign on both..."
source: http://developer.android.com/resources/articles/zipalign.html
Enable? Nor sure. Kyrillos has it by default. I don't remember about others...
EDIT: Remove ".TXT" and place in /etc/init.d (or /system/etc/init.d). I belive it should be enoguh but can't say for sure. I only hope Kyrillos will not mind, it is from his 8.1 rom. Or hillbeast who edited it to work with hybrid.
Click to expand...
Click to collapse
I did what you said. I am rebooting the phone now and hopefully your help is sufficient
Smonic said:
What is zipalign, what are the benefits of zipalign and how do i do this?
Thank you
Click to expand...
Click to collapse
Download "ADB Mask Controller"
install it, connect your phone with USB debugging enabled.
Make sure the connection is detected by the application, click on the refresh button beside SEARCH Option in the program.
in the first screen, you will find option "Push Zipalign" Do that.
Go to the screen titled "Zipalign"
select the optioin you want to use zipalign for user app or system app or both.
Caution : Use this tool judiciously, it has many advanced features used by ROM developers mainly. Like pushing an app to system, removing bloatware, Sql LIte, and many many more.....A wrong step may force you to reflash your ROM.
Hope it helped.
umangsagar said:
Download "ADB Mask Controller"
install it, connect your phone with USB debugging enabled.
Make sure the connection is detected by the application, click on the refresh button beside SEARCH Option in the program.
in the first screen, you will find option "Push Zipalign" Do that.
Go to the screen titled "Zipalign"
select the optioin you want to use zipalign for user app or system app or both.
Caution : Use this tool judiciously, it has many advanced features used by ROM developers mainly. Like pushing an app to system, removing bloatware, Sql LIte, and many many more.....A wrong step may force you to reflash your ROM.
Hope it helped.
Click to expand...
Click to collapse
I clicked on 'push zipalign' a number of times and then clicked on zipalign data/app but nothing happens. It says zipalign not found. Push zipalign and try again or sth like that. I've rebooted my phone and i'm trying now,
Check if you have /system/bin/zipalign. If not try to put it there manually.
ADB controller might have problems mounting your /system r/w and it is read-only. Maybe you can mount it r/w and then try with controller (just guessing, though).
And you'll need to have the S03_zipalign made by kyrillos and hillbeast in /system/etc/init.d (or just /etc/init.d) posted earlier. For what I can tell it zipalign's all apps from /system/app and /data/app.
mrvek said:
Check if you have /system/bin/zipalign. If not try to put it there manually.
ADB controller might have problems mounting your /system r/w and it is read-only. Maybe you can mount it r/w and then try with controller (just guessing, though).
And you'll need to have the S03_zipalign made by kyrillos and hillbeast in /system/etc/init.d (or just /etc/init.d) posted earlier. For what I can tell it zipalign's all apps from /system/app and /data/app.
Click to expand...
Click to collapse
I second that esp rw option, its already there in ADB Controller. U can manually browse as instructed above. Its not that difficult, I am sure u will be able to do it well, reply here if u still get probs even after taking all steps as directed in my previous post and the post i quote above.
umangsagar said:
I second that esp rw option, its already there in ADB Controller. U can manually browse as instructed above. Its not that difficult, I am sure u will be able to do it well, reply here if u still get probs even after taking all steps as directed in my previous post and the post i quote above.
Click to expand...
Click to collapse
Thanks for the help. I'll go back and thank the posts
Anyway i decided not to do any tweaks because i always end up flashing a different ROM anyway, I'm weak when it comes to flashing ROMS
It's like an addiction
Smonic said:
Thanks for the help. I'll go back and thank the posts
Anyway i decided not to do any tweaks because i always end up flashing a different ROM anyway, I'm weak when it comes to flashing ROMS
It's like an addiction
Click to expand...
Click to collapse
hahhahahha...this tweak is not that difficult to implement..and i guess pretty safe...agree totally to the last line
I thought I'd give this a go. I've moved the first file on the previous page to system/etc/init.d and the second file on the top of this page to system/bin. Is this sufficient?
you mean to say you have s03_zipalign in /system/etc/ini.d and zipalign file posted above as /system/bin/zipalign ??
i guess this should do for you .. awaiting to hear if u succeeded.
umangsagar said:
you mean to say you have s03_zipalign in /system/etc/ini.d and zipalign file posted above as /system/bin/zipalign ??
i guess this should do for you .. awaiting to hear if u succeeded.
Click to expand...
Click to collapse
It's working fine. The apps load up fast and i'm happy Thanks!
As there are again and again discussions concerning the minfree settings in CM12 roms, I decided to open this thread. If a moderator thinks, this is the wrong place for this thread, just move it, to where it belongs.
Obviously, since the last builds of CM12, the settings for minfrees cause some trouble. After a clean install of any rom, the minfree settings in trickstermod and in fauxclock are completely empty. In fauxclock the settings for OOM (out of memory) Score as well. Some people entered them manually, but I'm afraid, this won't help.
To really solve this, you have to do the following steps: open your file explorer, go to sys/module/lowmemorykiller/parameters. There you will find 5 files. Two of them do not have correct permissions. The first one, called adj, is for the OOM Scores. The other one, called minfree, is, you won't guess it, for the minfrees. :fingers-crossed:
As you see, both of them have only write permissions, but no read permissions. So I guess, the system will ignore these settings completely. I checked this, using cool tool from play store, very nice tool to show for example the actual free ram in your status bar. And in deed, the ram went down to 25MB, after I had opened a handful apps, and then my phone stopped working. I only could do a reboot.
Now the solution, which is quite easy: change the permissions into rw-rw-rw (666), and maybe change the group under owners into root (I'm not sure, if this is necessary, but it does make no problems, so why not).
Et voilà - if you now open trickstermod or fauxclock again, you will see the preset parameters. As you can see also, the minfrees there are really high. In another thread, there have been suggested the following settings, which are a good standard:
trickstermod 48/60/72/84/96/120
fauxclock 12288/15360/18432/21504/24576/30720
Important: In fauxclock, the minfree settings are not made in MB. You have to enter the so called "pages" for minfrees, which I can't explain exactly, what this is. In general, if you want to change minfrees in fauxclock, just take the settings in MB, you want to, and multiply by 256. This will give you the correct values.
BTW I don't think, it's a good idea, to change the OOM Scores, as long as you do not know exactly, what you're doing.
So, hopefully I could help a bit and clear some things up. But the final question to the CM devs remains:
is this a bug or is this a feature?
With me, those files were already chmod 666, owner root. I use latest liquidsmooth rom. What i did, prior reading your post, was that i set minfree in trickster, from my presets, than immedatly switched to faux, parameters were there, pressed apply, switched set on boot and rebooted. After that minfree r sticking in faux and trickster. Guess that my actions leaded to what you have described. Anyway, your way is much more convinient - at least one app less to use
I don't get it... The directory you mentioned is empty on my one s as well as on my nexus 10 both with cm12.
However my settings stick since I use fauxclock.
One more thing I don't get is in fauxclock. It says "kilobyte" explicitly in the minfree settings although you said (and it stems to be) this strange pages value....
mariachi62 said:
I don't get it... The directory you mentioned is empty on my one s as well as on my nexus 10 both with cm12.
However my settings stick since I use fauxclock.
One more thing I don't get is in fauxclock. It says "kilobyte" explicitly in the minfree settings although you said (and it stems to be) this strange pages value....
Click to expand...
Click to collapse
You have to use your file manager with root permissions. Depending on which file manager you use, this can be done differently. The inbuilt CM12 file manager can be given root permissions in settings, in Root explorer for example you have to mount the directory as r/w.
An yes, you are right, fauxclock says, the settings are in kilobyte, but this is not correct. If you succeed to open the minfree file with your file manager, you will find there exactly the values, you have entered in fauxclock.
Damnit, you're right. Solid explorer doesn't show the content of the directory.... I use it a long time and always had the feeling solid explorer shows me all files...
Cm file manager works, thanks!
mariachi62 said:
Damnit, you're right. Solid explorer doesn't show the content of the directory.... I use it a long time and always had the feeling solid explorer shows me all files...
Cm file manager works, thanks!
Click to expand...
Click to collapse
It does work with solid explorer as well. The point is, there is no option, to set root permissions manually in solid explorer. So the trick is to create a situation, where solid explorer will ask for root access. For example: long press any folder in your system root, tap properties, tap change (attributes) and now press OK, without changing anything. You will be asked for root access.
Now everything should be fine!
got a problem.
parameter file is empty.
using unofficial cm12 on htc one s with icecode kernel
waver1967 said:
got a problem.
parameter file is empty.
using unofficial cm12 on htc one s with icecode kernel
Click to expand...
Click to collapse
problem solved
For solid explorer, just try to open /data and it will ask for root permissions. I do it every time I flash my phone.
Thanks a lot man! I wasn't aware of the skewed minfree files. Was setting them in Trickster and wondering why the apps keep shutting down on me when multitasking. Great work
oll0 said:
Thanks a lot man! I wasn't aware of the skewed minfree files. Was setting them in Trickster and wondering why the apps keep shutting down on me when multitasking. Great work
Click to expand...
Click to collapse
They will still close even so...just not so obvious
Rapier said:
They will still close even so...just not so obvious
Click to expand...
Click to collapse
Uh yes obviously. However they were actually closing the instant i opened another app. Couldnt even keep two apps open at the same time, that was pretty bad.
oll0 said:
Uh yes obviously. However they were actually closing the instant i opened another app. Couldnt even keep two apps open at the same time, that was pretty bad.
Click to expand...
Click to collapse
Yes, I know what you mean. Was the same for me. Having better minfree settings that stick after a reboot helped but didn't solved the issue completely. But at least now phone is usable. I put my hopes in that Google patch they'll release with 5.0.3
Sent from nowhere over the air...
deleted
Thanks for this thread, I changed the permission with "chmod 666" using adb shell, but after a reboot, the files were back to write-only mode, is it normal ? How do you make it permanent ?
Sylvain_44 said:
Thanks for this thread, I changed the permission with "chmod 666" using adb shell, but after a reboot, the files were back to write-only mode, is it normal ? How do you make it permanent ?
Click to expand...
Click to collapse
If it's reverting, I guess the only way would be through an script that runs at boot time. But it's strange, the permissions should stick once set...
Sylvain_44 said:
Thanks for this thread, I changed the permission with "chmod 666" using adb shell, but after a reboot, the files were back to write-only mode, is it normal ? How do you make it permanent ?
Click to expand...
Click to collapse
I used a file explorer with root permissions like root explorer or ES file explorer. My permissions are actually rw-rw-rw, both for adj and minfree file. I guess, this is 666? And they stick after a reboot. But honestly I am not quite sure, if I changed something else. IIRC, I might have changed the permissions for system/etc/init.d/90userinit to rwxr-xr-x. Maybe you want to check this, too.
Well, they don't stick because init.rc sets them to chmod 0220 on boot. That makes me wonder if maybe it was supposed to be like this? I wanted to change it but I don't want to screw anything up. There is a dedicated section for low memory killer in init.rc and only things there are chmod 0220 for those two files and chown for them - so basically the things that we are fixing in this thread. A bug or a feature?
jakubmi9 said:
Well, they don't stick because init.rc sets them to chmod 0220 on boot. That makes me wonder if maybe it was supposed to be like this? I wanted to change it but I don't want to screw anything up. There is a dedicated section for low memory killer in init.rc and only things there are chmod 0220 for those two files and chown for them - so basically the things that we are fixing in this thread. A bug or a feature?
Click to expand...
Click to collapse
Thanks for this hint! Indeed, this might be the other thing, that I had changed. In CM11 roms, the described permissions in init.rc are 664 - both for adj and minfree file. I am not quite sure, if this helps, but it's worth an attempt. You can change the permissions in init.rc to 644, reboot and see, if the permissions for adj and minfree are sticky now. I just did this ,and everything is fine -so you can try without risk, I guess. But I must say, I hadn't the problem before, that the permissions for adj and minfree were reset after reboot. Could be related to the changes in init.rc, but I am not sure.
A weird thing: I made a backup and tried anyway yesterday but after a reboot my init.rc restores itself to normal. I tried another time: Modified the values and saved. After reopening it's still there and it stays there but only until I reboot the phone. After reboot the permissions are not set correctly and init.rc restores itself to original state. Is there something I do not know about modifying init.rc? Because that is the first time I try to do something with it.