Not included Motorola Atrix 2 - Motorola Atrix 2

Problem description:
I have a motorola Atrix 2. was Android 4.0.4.
I wanted to install an unofficial firmware CyanogenMod 10.
when I set the phone hangs on the splash screen.
then wanted to get the original firmware flash the instructions on this http://forum.xda-developers.com/showthread.php?t=1935485
When I connected the usb and start the installation with an inscription a2_ics_recovery.bat Battery Low and disconnected the phone.
Now he does not turn on. No reaction at all ... not even charged ...
I charge the battery with the frog but the reactions of 0.
phone does not turn on, even the screen does not light!
connect usb shines white light
Please help me

irakli-18 said:
Problem description:
I have a motorola Atrix 2. was Android 4.0.4.
I wanted to install an unofficial firmware CyanogenMod 10.
when I set the phone hangs on the splash screen.
then wanted to get the original firmware flash the instructions on this http://forum.xda-developers.com/showthread.php?t=1935485
When I connected the usb and start the installation with an inscription a2_ics_recovery.bat Battery Low and disconnected the phone.
Now he does not turn on. No reaction at all ... not even charged ...
I charge the battery with the frog but the reactions of 0.
phone does not turn on, even the screen does not light!
connect usb shines white light
Please help me
Click to expand...
Click to collapse
Need more info..which firmware were you previously on??..was it at & t..and was it the official OTA..from what you said i guess you are hard bricked..

devilhunter47 said:
Need more info..which firmware were you previously on??..was it at & t..and was it the official OTA..from what you said i guess you are hard bricked..
Click to expand...
Click to collapse
I have an official AT & T. was the official firmware 4.0.4.OTA 67.21.125.en.us. I wanted to install CyanogenMod 10. after installing CyanogenMod 10. not loaded after logo.
then wanted to get the original firmware flash the instructions on this http://forum.xda-developers.com/show....php?t=1935485 .
When I connected the usb and start the installation with an inscription a2_ics_recovery.bat Battery Low and disconnected the phone.
Now he does not turn on. No reaction at all ... not even charged ... :crying:

irakli-18 said:
I have an official AT & T. was the official firmware 4.0.4.OTA 67.21.125.en.us. I wanted to install CyanogenMod 10. after installing CyanogenMod 10. not loaded after logo.
then wanted to get the original firmware flash the instructions on this http://forum.xda-developers.com/show....php?t=1935485 .
When I connected the usb and start the installation with an inscription a2_ics_recovery.bat Battery Low and disconnected the phone.
Now he does not turn on. No reaction at all ... not even charged ... :crying:
Click to expand...
Click to collapse
Damn.. I hate to see this... definitely a hard brick.
Next time, Read Read Read, and then, Read some more. This could have been easily avoided by reading around the forum.
I hate that you've messed it up my friend. But a mistake like this should be a lesson learned. Just hope you can get a replacement.
There is no fxz from Official ICS OTA...
Sent from my MB865 using xda premium

Axis_Drummer said:
Damn.. I hate to see this... definitely a hard brick.
Next time, Read Read Read, and then, Read some more. This could have been easily avoided by reading around the forum.
I hate that you've messed it up my friend. But a mistake like this should be a lesson learned. Just hope you can get a replacement.
There is no fxz from Official ICS OTA...
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
phone will not work? :crying::crying::crying:

irakli-18 said:
phone will not work? :crying::crying::crying:
Click to expand...
Click to collapse
From what you've described, no.. it's hard bricked. There is no hope.. unless you're still under warranty.
I'm sorry. Its a bummer for me to see threads like this..
Sent from my MB865 using xda premium

Axis_Drummer said:
From what you've described, no.. it's hard bricked. There is no hope.. unless you're still under warranty.
I'm sorry. Its a bummer for me to see threads like this..
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
then delete this topic http://forum.xda-developers.com/showthread.php?t=1935485 that others were not victims ;(

irakli-18 said:
then delete this topic http://forum.xda-developers.com/showthread.php?t=1935485 that others were not victims ;(
Click to expand...
Click to collapse
That thread is for soft bricks on official ICS. Not hard bricks. As it stands right now, the A2 can't be revived from a hard brick. Believe me.
Read this thread. Just for useful information http://forum.xda-developers.com/showthread.php?p=32799824
Sent from my MB865 using xda premium

pity that there is no way restore my phone ;( I have no guarantee of AT & T ;(

irakli-18 said:
pity that there is no way restore my phone ;( I have no guarantee of AT & T ;(
Click to expand...
Click to collapse
Try the warranty replacement through Moto?
Sent from my MB865 using xda premium

Axis_Drummer said:
Try the warranty replacement through Moto?
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
I live in the country of Georgia. phone ordered from USA

irakli-18 said:
I live in the country of Georgia. phone ordered from USA
Click to expand...
Click to collapse
Fine..guess you'll be more careful next time
Sent from my ME865 using xda app-developers app

irakli-18 said:
I live in the country of Georgia. phone ordered from USA
Click to expand...
Click to collapse
Well didn't the phone come with 1 year warranty? If so it might be worth it to try and obtain a new one even though it'd take at least 2 weeks for them to receive it and look at it etc..
Sent from my MB865 using xda premium

Axis_Drummer said:
Well didn't the phone come with 1 year warranty? If so it might be worth it to try and obtain a new one even though it'd take at least 2 weeks for them to receive it and look at it etc..
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Warranty until April but I have not AT & T documents

irakli-18 said:
Warranty until April but I have not AT & T documents
Click to expand...
Click to collapse
Where did you buy the phone from in the US?
Sent from my MB865 using xda premium

Axis_Drummer said:
Where did you buy the phone from in the US?
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
I bought it in ebay!!!

irakli-18 said:
I bought it in ebay!!!
Click to expand...
Click to collapse
And the hope bar drops yet again.. lol
If you bought it brand new, it should have a warranty. Unless it wasn't from a credited dealer. Otherwise just sounds like more bad news..
I feel for you man and I wish you the best of luck.
Sent from my MB865 using xda premium

You can try to replace the motherboard. Try finding atrix2 with broken screen on ebay. You might find a cheap replacement.
Sent from my MB865 using xda app-developers app

navalsamurai said:
You can try to replace the motherboard. Try finding atrix2 with broken screen on ebay. You might find a cheap replacement.
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
This will come down? http://www.ebay.com/itm/MOTOROLA-MB865-ATRIX-2-AT-T-/280997524777?pt=Cell_Phones&hash=item416cc1f529

waiting for help :crying:

Related

Hard Bricked Samsung Galaxy S 4G...Please help..

Hi, everyone, I've recently HARD BRICKED my Samsung Galaxy MODEL: T959V with T-mobile.
First off, I got pattern locked on my phone, yea I know I'm an idiot, LOL. Next I totally forgot my gmail password so I could not log back into my phone.
So then I next decided to flash back to stock with odin 1.7 and T959UVJFD. tar file from this thread: http://forum.xda-developers.com/show....php?t=1047087.
As a result, my phone would boot to the loading screen with the dashed circle and a battery display in the background and thus would not finish booting all the way.
So I figured I would do more research and found that people would try flashing with the Eugene_2E_JK2_Froyo from this thread: http://forum.xda-developers.com/show...833024&page=49 and after flash back to stock.
After I flashed with the Eugene rom this was when the phone completely died and would not turn on. I tried the take out the battery, holding down and up volume button and plugging into computer method but the computer would not detect it anymore.
Now I don't know what to do. I realized I was flashing with the Galaxy Vibrant kernels with Odin and now, it won't turn on anymore and can't boot into download mode. It is also not being detected my computer when I plug it in. I'ts a blank screen.
Please help.. Thanks, and appreciate it.
Unfortunately, you won't get much sympathy for that. Here's some info for you though.
http://forum.xda-developers.com/showthread.php?t=1333423
http://forum.xda-developers.com/showthread.php?t=1358498
If you can't do the first thread, try to look for someone who can help you with it.
Other than that, you're SoL.
Good luck.
Wow... all kinds of fail.
Sent from my SGH-T959V using XDA App
op, lol. You are lucky bkoon posted first. Normally people would flame you for something like this. If ths above methods don't work, post in this thread again. Don't worry, you're not the first one to do this...pm me if you are still having problems.
Sent from my T959 using xda premium
jager555 said:
op, lol. You are lucky bkoon posted first. Normally people would flame you for something like this. If ths above methods don't work, post in this thread again. Don't worry, you're not the first one to do this...pm me if you are still having problems.
Sent from my T959 using xda premium
Click to expand...
Click to collapse
Normally wouldn't have posted anything, but seeing that no one did and started flaming him, I decided to help.
There's a good handful of people on XDA (maybe more) who are capable of doing what I mentioned to you. You'll have to look for them though. I'm sure they charge a decent fee as well.
There was a thread by raver i think that stated how to unbrick a hard brick
Sent from my T959 using xda premium
If you can unbrick it.... it was never bricked to begin with.
Sent from my SGH-T959V using XDA App
camalus said:
If you can unbrick it.... it was never bricked to begin with.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
What? the op is definitely bricked...
Sent from my T959 using xda premium
UnBrickable mod is your best option. Read here: http://forum.xda-developers.com/showthread.php?t=1333424
I'd you don't feel comfortable or don't have the tools, I can do it for $30 + shipping (usually $6) send me a PM.
I am having the same problem right now.... did you ever fix yours?
Mylilacs said:
I am having the same problem right now.... did you ever fix yours?
Click to expand...
Click to collapse
What did you do? Listing the steps you took will help.
hechoen said:
What did you do? Listing the steps you took will help.
Click to expand...
Click to collapse
...Will help you get scorned and ridiculed mercilessly! hahah
Mylilacs said:
I am having the same problem right now.... did you ever fix yours?
Click to expand...
Click to collapse
Hello!! I bricked my gs4g, couldn't put it in download mode with the regular bottoms combo, so what I did was:with the phone off push volume bottoms, both in the same time nothing else, then connect your phone with the computer(usb), that gave me download mode
AdamOutler said:
UnBrickable mod is your best option. Read here: http://forum.xda-developers.com/showthread.php?t=1333424
I'd you don't feel comfortable or don't have the tools, I can do it for $30 + shipping (usually $6) send me a PM.
Click to expand...
Click to collapse
I have the same problem and I need you help me, I can pay you the price o more, but I'm from dominican republic and is to dificult send you the phone, so can you tell me whish is the best option to recover my phone.
thanks
hackeadorazo said:
I have the same problem and I need you help me, I can pay you the price o more, but I'm from dominican republic and is to dificult send you the phone, so can you tell me whish is the best option to recover my phone.
thanks
Click to expand...
Click to collapse
Can you get your phone to boot to download mode?
Sent from my SGH-T959 using Tapatalk 4
Cooptx said:
Can you get your phone to boot to download mode?
Sent from my SGH-T959 using Tapatalk 4
Click to expand...
Click to collapse
no, the phone is totaly dead
hackeadorazo said:
no, the phone is totaly dead
Click to expand...
Click to collapse
Does your phone light up at all?
If not, could your battery be completely dead and broke?
Sent from my SGH-T959 using Tapatalk 4
Cooptx said:
Does your phone light up at all?
If not, could your battery be completely dead and broke?
Sent from my SGH-T959 using Tapatalk 4
Click to expand...
Click to collapse
the battery is good, it measure is 4.1 and 3.7 is enough

Lg Optimus G2x -- MasterMind Root ( Developer Hassan Agha From Pak-Aims )

hey Guys.. i am Proudly Presenting you a Rooting Solution for Our G2x.. try it HAppi Rooting
Instruction
Turn Debugging mode on
Connect the usb cable
Run " Run.bat"
your phone will restart and you are done.. Simple isnt it?
That's it? Nothing else? No kind of description or anything?
Sent from my LG-P999 using Tapatalk 2
dw9906 said:
That's it? Nothing else? No kind of description or anything?
Sent from my LG-P999 using Tapatalk 2
Click to expand...
Click to collapse
Lol +1 how do we use it
Sent from my LG-P999 using xda premium
iDreamless531 said:
Lol +1 how do we use it
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
Download, find a baby seal and punch it.
Sent from my LG-P999 using xda premium
wgrant said:
Download, find a baby seal and punch it.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
Should I make a backup before I begin the punching?
Sent from my LG-P999 using xda premium
candleworth7808 said:
Should I make a backup before I begin the punching?
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
Hmm nah, just make sure to wipe AFTER the punching.
Sent from my LG-P999 using xda premium
I didn't know that our g2x needed a rooting solution? It is a shame we have been running without root this whole time.
wgrant said:
Hmm nah, just make sure to wipe AFTER the punching.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
I wiped before punching and now my phone is bricked...
Help pl0x????????
buru898 said:
I wiped before punching and now my phone is bricked...
Help pl0x????????
Click to expand...
Click to collapse
You killed the seal! Gotta NVFLASH it again
Envoyé depuis mon LG-P999 avec Tapatalk
ok so you gotta provide more information about this rooting solution you have going on. You cant just post in the dev section and expect everyone to be on your level and understand what your doing here... more info would be helpful to be clear and not have to answer the same question a billion times.
edit:
Ok I see this is for rooting your g2x using the zergrush process.. a little explanation goes a long way.. Although this should probably be in the general section since its not dev'in... just my opinion.
Mastermind_hassan said:
hey Guys.. i am Proudly Presenting you a Rooting Solution for Our G2x.. try it HAppi Rooting
Click to expand...
Click to collapse
Little late to the party since we don't need a rooting solution when nvflash is in play
Sent from my LG-P999 using Tapatalk 2
ayysir said:
Little late to the party since we don't need a rooting solution when nvflash is in play
Sent from my LG-P999 using Tapatalk 2
Click to expand...
Click to collapse
effort is effort bro.. this could still be useful to peope who dont want to use the nvflash... although I dont see why...nvflash tool is super powerful!
Mastermind_hassan said:
hey Guys.. i am Proudly Presenting you a Rooting Solution for Our G2x.. try it HAppi Rooting
Click to expand...
Click to collapse
Instruction
Turn Debugging mode on
Connect the usb cable
Run " Run.bat"
your phone will restart and you are done.. Simple isnt it?
Mastermind_hassan said:
Instruction
Turn Debugging mode on
Connect the usb cable
Run " Run.bat"
your phone will restart and you are done.. Simple isnt it?
Click to expand...
Click to collapse
your missing the point.. you cant just post stuff in the dev section and have no info on it.. not everyone is fluent in geek. its not about simple instructions its about providing the most info for the end user so noobs have no issues testing your time and effort..
Or where you got it from. Unless you learned this stuff, with in a couple days, if so then Congrats.
Sent from my LG-P999 using xda premium
da-pharoah said:
effort is effort bro.. this could still be useful to peope who dont want to use the nvflash... although I dont see why...nvflash tool is super powerful!
Click to expand...
Click to collapse
I know, but this tool won't get you out of brick. And root solution I know is best is superoneclick
Sent from my LG-P999 using Tapatalk 2
ayysir said:
I know, but this tool won't get you out of brick. And root solution I know is best is superoneclick
Sent from my LG-P999 using Tapatalk 2
Click to expand...
Click to collapse
yup... thats why this should be in the general section.. same dog.. different trick..
da-pharoah said:
yup... thats why this should be in the general section.. same dog.. different trick..
Click to expand...
Click to collapse
Maybe, mind you this is a stretch, this should go in the apps/themes section above general since it does do something for the phone.
That's a stretch though.
Sent from my LG-P999 using xda premium
?
What is this? Root? Is that short for root beer? Wow its been almost a year now since I saw that topic brought up. Well thinking back the release of v21e. Hmmm what was that stuff we used to get back in the day? It is simple enough to do I guess. It is always good to have more than 1 solution. I really forgot about it being that all but 3 Rome have root.
And come on, why does it have to be a baby seal?
Does any one know if this will work on total 2.3.4? I would try but after I post I am flashing kwes's 2.3.4
alias503 said:
What is this? Root? Is that short for root beer? Wow its been almost a year now since I saw that topic brought up. Well thinking back the release of v21e. Hmmm what was that stuff we used to get back in the day? It is simple enough to do I guess. It is always good to have more than 1 solution. I really forgot about it being that all but 3 Rome have root.
And come on, why does it have to be a baby seal?
Does any one know if this will work on total 2.3.4? I would try but after I post I am flashing kwes's 2.3.4
Click to expand...
Click to collapse
My rom is already rooted. If youre on stock v21y you can easily root using super oneclick if you dont want to flash my rom, however my rom adds more then just root. Well its not my rom, I just kanged LG and made some improvisations.
On topic: OP you should really add more info to your posts if you intend on posting in the dev section. The majority of us know there are alot of easy ways to gain root, hell you can root a g2x with a scientific calculator if you put your mind to it...
Back off topic: i loled at the baby seal punching thanks.

Flashed i777 kernel to i727

And now my Galaxy S2 i727 won't turn on or boot into download mode. I was told getting a jig may fix it but if my phone won't turn on would I be able to use a jig?
Is there any way to make my phone functional again or am I out of luck?
well that was stupid lol. sorry bud you might be able to jtag it but idk good luck
Yeah, you're hard-bricked. A jig would almost certainly be a waste of time and money. Send it to the jtag guy for $50 or buy a new one, maybe try to warranty it out through Sammy if you want to risk them finding out that you'd been flashing and broken the warranty.
Not to rub salt in the wound or anything, but had you paid close attention and read before flashing, you'd have noticed that you were about to flash an SGS2 kernel onto a SR, and riding full-speed on the train to Bricksville.
kinghaf said:
And now my Galaxy S2 i727 won't turn on or boot into download mode. I was told getting a jig may fix it but if my phone won't turn on would I be able to use a jig?
Is there any way to make my phone functional again or am I out of luck?
Click to expand...
Click to collapse
thats why the last part of my sig says what it says.
the 1st link in my sig has a link for brick repair, but first try to get it fixed under warranty, just say that it wont turn on anymore and act dumb about flashing...which is not to far from the truth
Smh.....another one bites the dust this is why I get so angry nobody takes time to learn about their $400+ device but then we are supposed to help them fix it..... my faith in the ability of our society to learn is dead I can't wait to see what happens when these generations get older
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Least people are predictable...? I swear even the posts are almost the same word for word each time this happens... :cyclops:
vincom said:
act dumb about flashing...which is not to far from the truth
Click to expand...
Click to collapse
Hahaha...good one vincom
Alright thanks for the help. I'll try getting it replaced first. Is mobiletechvids a reputable place? I don't want to get scammed.
kinghaf said:
Alright thanks for the help. I'll try getting it replaced first. Is mobiletechvids a reputable place? I don't want to get scammed.
Click to expand...
Click to collapse
Yes, and just leave your phone alone from now on if you don't wanna read and understand what your're doing first.
s2-i777 JB rom
Can i use s2-i727 i.e. sky rocket's rom for flashing my Galaxy S2-i777 (AT&T)..??? If not then can ny1 pls send me the link for correct rom..
kaymaddy said:
Can i use s2-i727 i.e. sky rocket's rom for flashing my Galaxy S2-i777 (AT&T)..??? If not then can ny1 pls send me the link for correct rom..
Click to expand...
Click to collapse
Seriously? You are asking this?
kaymaddy said:
Can i use s2-i727 i.e. sky rocket's rom for flashing my Galaxy S2-i777 (AT&T)..??? If not then can ny1 pls send me the link for correct rom..
Click to expand...
Click to collapse
No. Look in the correct section of this forum
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Unless you wanna hardbrick it then u gotta jtagg it not funny
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
intelxtreme said:
Unless you wanna hardbrick it then u gotta jtagg it not funny
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Little slow on the response time there wouldn't you say?…
-------------------------------------------------
Sent from my Skyrocket i727 running Slim Bean
-----------Nexus 7 running AOKP M1-----------
Not to be an advocate of noobs... i was kinda confused at first too. BUT never took rooting and flashing as a joke so I read and read... took me a week or so before rooting (already reading up on skyrocket and S2 prior to purchase though) and more than 6 months of reading before flashing Embryo 6.
Rooting is the new cool aid... wish some people will quit trying to be cool and really understand what they are doing. Most noobs just wants to brag that they have a custom rom as though it elevates their standing in life. Geeez.
Illnevertell said:
Smh.....another one bites the dust this is why I get so angry nobody takes time to learn about their $400+ device but then we are supposed to help them fix it..... my faith in the ability of our society to learn is dead I can't wait to see what happens when these generations get older
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Biggs u just mad and not everyone is at the same level u think you
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
don728871 said:
Biggs u just mad and not everyone is at the same level u think you
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
You quoted a dude who left. Second he is right so many of these new guys don't research and just jump in the shiz thinking they are [email protected] . Third sentence structure son let's learn English please I almost didn't understand that at all.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
kinghaf said:
And now my Galaxy S2 i727 won't turn on or boot into download mode. I was told getting a jig may fix it but if my phone won't turn on would I be able to use a jig?
Is there any way to make my phone functional again or am I out of luck?
Click to expand...
Click to collapse
JTAG repair will fix your phone...
http://www.ebay.com/itm/160955490053?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
Racing19969 said:
JTAG repair will fix your phone...
http://www.ebay.com/itm/160955490053?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
Click to expand...
Click to collapse
Way to respond to something from 5 months ago when he received the exact same answer in the very first response.
------------------------------------------------------------------------
Sent from my Skyrocket i727 w/ Blinky'sRevenge
-----------------Nexus 7 running AOKP M1-----------------

[Hard Brick] JTag vs Manuf. Warranty Exchange

I just hard bricked my sgs3. FIRST TIME EVER!! I've been flashing roms,kernels, etc since the MyTouch3.
Little back story.....
I flashed the LSmooth - Linaro 4.2.1 Jelly Bean Rom with CWM6. I noticed that I could not find my nandroid backups. Searched XDA and saw a thread that stated that TWRP is compatible with 4.2.1 and it will move the internal /sdcard from /0 back to its original file location, etc, etc. I went to GooManager, downloaded the twrp.tar (d2vzw), then went to MobileOdin, loaded the .tar file and flashed.
BOOM!!! No power, DOA. dead ass!! :crying::crying:
(( FACE SLAP )) then I remembered via build.prop it was configured as "maguro" and not "d2vzw". So, I'm assuming that since I failed to edit the build.prop before flashing the d2vzw TWRP recovery, it bricked my phone.
-- No power via wall, usb
-- No download / recovery mode
-- NOTHING!
My question is, if I were to call in and ask for a warranty exchange, what is the likely hood of Verizon troubleshooting, reviving my phone and figuring it out that its been rooted?
Or, should I just send my phone to someone that can JTAG it for me?
kuntri said:
I just hard bricked my sgs3. FIRST TIME EVER!! I've been flashing roms,kernels, etc since the MyTouch3.
Little back story.....
I flashed the LSmooth - Linaro 4.2.1 Jelly Bean Rom with CWM6. I noticed that I could not find my nandroid backups. Searched XDA and saw a thread that stated that TWRP is compatible with 4.2.1 and it will move the internal /sdcard from /0 back to its original file location, etc, etc. I went to GooManager, downloaded the twrp.tar (d2vzw), then went to MobileOdin, loaded the .tar file and flashed.
BOOM!!! No power, DOA. dead ass!! :crying::crying:
(( FACE SLAP )) then I remembered via build.prop it was configured as "maguro" and not "d2vzw". So, I'm assuming that since I failed to edit the build.prop before flashing the d2vzw TWRP recovery, it bricked my phone.
-- No power via wall, usb
-- No download / recovery mode
-- NOTHING!
My question is, if I were to call in and ask for a warranty exchange, what is the likely hood of Verizon troubleshooting, reviving my phone and figuring it out that its been rooted?
Or, should I just send my phone to someone that can JTAG it for me?
Click to expand...
Click to collapse
You can send it to verizon as they'll have no clue what hapoened since a jtag will just be a fresh like new install showing no sing of it ever modified.
Sent from my SCH-I535 using xda app-developers app
Honest answer they won't know what happened.
Second honest answer? Grow a pair and pay for your mistake.
Sent from my SCH-I535 using xda app-developers app
I hard bricked mines before christmas.. Tried to flash cwm touch img through adb.. Sent my phone to mobiletechvideos paid 60 bucks paid extra for rush processing and express return shipping. Total was 95 bucks tookn10bdays from day sent to day received
iSheep... iSheep... Meowww that's Apple VZW GSIII
kuntri said:
I just hard bricked my sgs3. FIRST TIME EVER!! I've been flashing roms,kernels, etc since the MyTouch3.
Little back story.....
I flashed the LSmooth - Linaro 4.2.1 Jelly Bean Rom with CWM6. I noticed that I could not find my nandroid backups. Searched XDA and saw a thread that stated that TWRP is compatible with 4.2.1 and it will move the internal /sdcard from /0 back to its original file location, etc, etc. I went to GooManager, downloaded the twrp.tar (d2vzw), then went to MobileOdin, loaded the .tar file and flashed.
BOOM!!! No power, DOA. dead ass!! :crying::crying:
(( FACE SLAP )) then I remembered via build.prop it was configured as "maguro" and not "d2vzw". So, I'm assuming that since I failed to edit the build.prop before flashing the d2vzw TWRP recovery, it bricked my phone.
-- No power via wall, usb
-- No download / recovery mode
-- NOTHING!
My question is, if I were to call in and ask for a warranty exchange, what is the likely hood of Verizon troubleshooting, reviving my phone and figuring it out that its been rooted?
Or, should I just send my phone to someone that can JTAG it for me?
Click to expand...
Click to collapse
I don't have an answer for your question but I would like to ask one. Did the build.prop change cause the phone to brick because it made Goo Manager download the wrong file, Mobile ODIN to flash it wrong/to the wrong place, or something else I'm totally missing? This is just a new one to me and I try to stay up on this stuff so I don't end up with a brick myself. Thanks.
JBO1018 said:
I don't have an answer for your question but I would like to ask one. Did the build.prop change cause the phone to brick because it made Goo Manager download the wrong file, Mobile ODIN to flash it wrong/to the wrong place, or something else I'm totally missing? This is just a new one to me and I try to stay up on this stuff so I don't end up with a brick myself. Thanks.
Click to expand...
Click to collapse
Yes goo manager downloads recovery based on your build prop and such that's why it's always bad at the same time to change it if you aren't careful.
Sent from my SCH-I535 using xda app-developers app
nosympathy said:
Honest answer they won't know what happened.
Second honest answer? Grow a pair and pay for your mistake.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Number 1, I need my phone for work. (plus i know people in the wireless industry)
Number 2, You tough talking on the internet. LOL!
GoonAssJuan said:
Yes goo manager downloads recovery based on your build prop and such that's why it's always bad at the same time to change it if you aren't careful.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Thanks Bro! Now I know! I've been doing this too long to miss that.
JBO1018 said:
I don't have an answer for your question but I would like to ask one. Did the build.prop change cause the phone to brick because it made Goo Manager download the wrong file, Mobile ODIN to flash it wrong/to the wrong place, or something else I'm totally missing? This is just a new one to me and I try to stay up on this stuff so I don't end up with a brick myself. Thanks.
Click to expand...
Click to collapse
I downloaded the d2vzw TWRP recovery and flashed it before changing my build.prop from maguro to d2vzw. smh
DROID3R said:
I hard bricked mines before christmas.. Tried to flash cwm touch img through adb.. Sent my phone to mobiletechvideos paid 60 bucks paid extra for rush processing and express return shipping. Total was 95 bucks tookn10bdays from day sent to day received
iSheep... iSheep... Meowww that's Apple VZW GSIII
Click to expand...
Click to collapse
Instead, I called my VZW Account Rep(when i used to work BBYMobile), told them what happened. $12 Next day ....
reason why I didnt choose MobileTech,
1. I am unsure of the wait time
2. I need my cell for work
3. $12 Next day vs. $60-$95 10 Day wait ... ehhhhh
I do appreciate the comment and response, though. Thanks Bro~
GoonAssJuan said:
You can send it to verizon as they'll have no clue what hapoened since a jtag will just be a fresh like new install showing no sing of it ever modified.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I was wondering because my vzw rep was unsure. i was going to invest in mobiletech , but i was unsure about the wait time and not having a phone for a few days to weeks. if it was TMO or ATT, yea I would have sent it because I can find me a prepaid GSM phone and use that temporarily. Oh well, thanks for the response!
Actually, I just hard bricked my s3 a couple hours ago as well! My situation is a little different though! Earlier today I received my OTG cable in the mail from eBay....long story short, this thing just destroyed my phone....turns out I'm not the only one who's had this happen! People, please be careful, don't do what I did and buy a cheap OTG cable! There seems to be some confusion as to whether it's the cable or the phones that are the cause of the problem....just google it.... OTG hard brick.....you'll see what I'm talking about!
Sent from my ADR6400L using Tapatalk 2
Thank God for the almighty sdcard with my nandroid backup from yesterday! Should be getting my replacement s3 on Saturday, then to root and restore!
kuntri said:
Instead, I called my VZW Account Rep(when i used to work BBYMobile), told them what happened. $12 Next day ....
reason why I didnt choose MobileTech,
1. I am unsure of the wait time
2. I need my cell for work
3. $12 Next day vs. $60-$95 10 Day wait ... ehhhhh
I do appreciate the comment and response, though. Thanks Bro~
Click to expand...
Click to collapse
Maybe if you need your phone for work you shouldn't be so careless with it. Just saying.
Sent from my SCH-I535 using xda app-developers app
nosympathy said:
Maybe if you need your phone for work you shouldn't be so careless with it. Just saying.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
It would appear that you show... *adjusts sunglasses* no sympathy.
Sent from my SCH-I535 using xda premium
Obaterista93 said:
It would appear that you show... *adjusts sunglasses* no sympathy.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
In keeping with my name...WOW! Never heard that one before!
I have been called the asshole of XDA more than a few times for a reason
Sent from my SCH-I535 using xda app-developers app
nosympathy said:
In keeping with my name...WOW! Never heard that one before!
I have been called the asshole of XDA more than a few times for a reason
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Hey, somebody's gotta do it.
Sent from FBI Headquarters
nosympathy said:
In keeping with my name...WOW! Never heard that one before!
I have been called the asshole of XDA more than a few times for a reason
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
ur good man, i cringe anytime I see a send back to vz related question as this guy is how carriers can justify locking these phones down, or one of the reasons.
not that ethics and the internet go together but what op has done is wrong and it hurts this community.
vmancini3 said:
Actually, I just hard bricked my s3 a couple hours ago as well! My situation is a little different though! Earlier today I received my OTG cable in the mail from eBay....long story short, this thing just destroyed my phone....turns out I'm not the only one who's had this happen! People, please be careful, don't do what I did and buy a cheap OTG cable! There seems to be some confusion as to whether it's the cable or the phones that are the cause of the problem....just google it.... OTG hard brick.....you'll see what I'm talking about!
Sent from my ADR6400L using Tapatalk 2
Thank God for the almighty sdcard with my nandroid backup from yesterday! Should be getting my replacement s3 on Saturday, then to root and restore!
Click to expand...
Click to collapse
Happened to a lot and can't even be Jtagged. Burns out the PCIM and non repairable as per Josh at Mobile Tech.
vmancini3 said:
Actually, I just hard bricked my s3 a couple hours ago as well! My situation is a little different though! Earlier today I received my OTG cable in the mail from eBay....long story short, this thing just destroyed my phone....turns out I'm not the only one who's had this happen! People, please be careful, don't do what I did and buy a cheap OTG cable! There seems to be some confusion as to whether it's the cable or the phones that are the cause of the problem....just google it.... OTG hard brick.....you'll see what I'm talking about!
Sent from my ADR6400L using Tapatalk 2
Thank God for the almighty sdcard with my nandroid backup from yesterday! Should be getting my replacement s3 on Saturday, then to root and restore!
Click to expand...
Click to collapse
Dang bro! My replacement came in this afternoon (3p est) and I posted this yesterday night ( i think) ... I havent messed with that OTG cable, but good looking out.
prdog1 said:
Happened to a lot and can't even be Jtagged. Burns out the PCIM and non repairable as per Josh at Mobile Tech.
Click to expand...
Click to collapse
Wow!

couldnt leave well enuff alone

well my dumbass finally did it, i bricked my skyrocket. i had sky ics on it for months and was getting a little tired of it so i started playing with some other roms. i tried a new kernel on it and bam, all black, no vibration, no nothing. any combo of buttons or anything will bring her back. this totally sux for me because i am about to go on vacation and wasnt counting on kicking out the extra cash for another cell phone. just wanted to whine a little folks . thx for listening.
Kernel from a different device?
Sent from my SGH-I727
btm fdr said:
Kernel from a different device?
Sent from my SGH-I727
Click to expand...
Click to collapse
i dont think so , this is it lk_aosp_jb_vzw-v 1.10. it said flash failed then all gone . like i said it was my mistake , but it was a big one.
cain308 said:
i dont think so , this is it lk_aosp_jb_vzw-v 1.10. it said flash failed then all gone . like i said it was my mistake , but it was a big one.
Click to expand...
Click to collapse
Doesn't look like a skyrocket kernel. Where did you find it? Were you trying to flash a jb kernel on a ics rom? That could brick too.
Sent from my Nexus 4 using Tapatalk 2
toyes said:
Doesn't look like a skyrocket kernel. Where did you find it? Were you trying to flash a jb kernel on a ics rom? That could brick too.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
yeah thats what done it, i wasnt paying any attention, i am pretty sure it came from here but it may not have. anyway it goes i am screwed now.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
cain308 said:
i dont think so , this is it lk_aosp_jb_vzw-v 1.10. it said flash failed then all gone . like i said it was my mistake , but it was a big one.
Click to expand...
Click to collapse
Pretty sure that's an S3 kernel
Sent from my Nexus 4 using xda premium
JTAG may save it. That'll set ya back $50. Beats shelling out $ for a new phone..
Sent from my SGH-I727
That's definitely not a skyrocket kernel. It's a Verizon wireless kernel from some other phone.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
The times when i have soft bricked my phone is when messing with kernels. Now i just use the stock kernel for whatever rom i am using. Good luck
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
went out today and got the s4, but still sending this one out to see if i can get it fixed.
cain308 said:
went out today and got the s4, but still sending this one out to see if i can get it fixed.
Click to expand...
Click to collapse
50 bucks to mobiletechvideos and it will work again.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
Where did you find this kernel? And was it labeled as Skyrocket, ATT, Galaxy, S2, LTE, sgh-i727, or anything else that resembles the phone?
occupational_hazard said:
Where did you find this kernel? And was it labeled as Skyrocket, ATT, Galaxy, S2, LTE, sgh-i727, or anything else that resembles the phone?
Click to expand...
Click to collapse
i had downloaded it earlier and sent it to the root of my phone ,but never installed it and forgot to delete it from phone . well the other night i downloaded the beanstalk rom and was gonna put it on my phone, wasnt paying attention and installed this , well tried . after the fail came the brick.
xcrazydx said:
50 bucks to mobiletechvideos and it will work again.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
Click to expand...
Click to collapse
friend told me about them and i looked them up, thats where its going. thanks for the help.
maybe you might have the same luck as toyes, use a usb jib or "dongle". They are very cheap. $5 and might save you the $50 jtag. Its worth a shot.
occupational_hazard said:
maybe you might have the same luck as toyes, use a usb jib or "dongle". They are very cheap. $5 and might save you the $50 jtag. Its worth a shot.
Click to expand...
Click to collapse
Removed.
Apologies for the misinformation.
Sent from my SAMSUNG-SGH-I727 using xda premium
ctalcant said:
Don't waste the money, has been discussed many times that the USB jig is not helpful, send it off to get jtagged.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
USB Jig did indeed save my phone. (Read back in the offtopic if you want more details.) But in this case here it is hardbricked and will not help. The only thing to do is jtag.
Toyes

Categories

Resources