This isn't a double post; other resolved posts are too specific.
I have an IdeaUSA CT702, commonly referred to as an A777. It's rooted and I think the bootloader is unlocked (can't tell because one of my last posts wasn't answered: Fastboot Devices = ?).
The problem:
I recently modified my build.prop and replaced it with some corrupted one that I found online to allow for more compatibility (ie. Gameloft Apps). After restarting my tablet, the splash showed, finished loading, but didn't continue on to show the "android" boot logo. I then restarts after some point in time. The black screen that it stops on is fastboot mode (my fastboot is just a black screen for some reason. It always was. What should I flash? My original build.prop is attached in a zip file.
I also ripped my boot.img and recovery.img (I don't have CWM rocovery, there is no compatible one) earlier just for no reason. I don't have a nandroid backup, and I didn't rip the system.img. I can boot into recovery and fastboot, just not normal boot, so perhaps we could flash an update.zip? I also tried using UniFlash 1.2 and the build.prop editor but for some reason it always reverts back to the corrupted version when I restart the program. Why is this?
Related
Hey guys, just wondering if any of you know a fix for this on my WIFI only xoom
Using the guide from here about Wifi Unlocking and rooting Ive unlocked the bootloader on my Xoom. Ive flashed Clockwork and am up to the part where I have to boot into clockwork recovery to install the root tool, however there is no option to enter 'Android Recovery' when I push the Down key on the dual core boot screen, during the first 3 seconds of the first boot after flashing. Theres NVFlash, fastboot and another but no recovery.
I am able to get into recovery via the ADB REBOOT RECOVERY command however I dont get into Clockwork and am stuck on a screen with a green android logo in the center. Pushing any manner of buttons does nothing and the tab automatically resets after 2 or 3 mins in that mode. Has anyone else seen this and know of a fix?? Ive since learned that if you allow the tab to boot into honeycomb it installs the stock recovery and you have to start over by reflashing clockwork, as stated tho no Android Recovery option appears. Any ideas?
recovery is not installed properly.
put your recovery file in fastboot folder
rename it to recovery.img
in fastboot run: fastboot flash recovery recovery.img
this recovery file is not zip file but .img file(rename it for ease of typing)
I've done it exactly like that, 3 times now. all the messages seem to indicate its flashed correctly. Heres what it says on the tab:
Flashing allowed for partition recovery
OneWire: Charger not connected
Battery Level 82%
Flashing Stormgr partition recovery Status:- done!
And i get the OKAY's in the terminal box as well. Still no Android recovery menu. I read in a dev post reguarding this same procedure a few other ppl had the same issue. I was hoping sum1 had a fix
Nexus S 4g
I did the one click root month or 2 ago and gained unlock and SU permissions. My phone updated to 2.3.7, last week. I decided to load CWM today and discovered I no longer had permissions. I've tried several things and am stuck.
Nothing in ROM manager will work properly. I get message: "error occured while attempting to run priviledged commands" for fix permissions, or load other CWMR (that worked in the past I had to put an earlier one in to be able to access recovery in bootloader). If I try to backup, apply .zip, etc it just never reboots.
If I go to bootloader and go into recovery, each time it shows unlock, then the triangle with an exclamation point (so I can't backup, restore previous backup, anything)
I managed to grab SU 3.0 and force it to install over my existing 2.3.6, it did, sees my su (which is in system/bin which I've read is a problem ) as being outdated and wants to update it, fails each time.
So someone smarter than me please advise. My phone is functioning nicely without FCs or other issues, a normal boot or reboot goes fine, but I fear for the day I really need my backup. Not to mention frustrating that I seem to be locked out from making any changes now.
Thanks, Travis
sobamaflyer said:
Nexus S 4g
I did the one click root month or 2 ago and gained unlock and SU permissions. My phone updated to 2.3.7, last week. I decided to load CWM today and discovered I no longer had permissions. I've tried several things and am stuck.
Nothing in ROM manager will work properly. I get message: "error occured while attempting to run priviledged commands" for fix permissions, or load other CWMR (that worked in the past I had to put an earlier one in to be able to access recovery in bootloader). If I try to backup, apply .zip, etc it just never reboots.
If I go to bootloader and go into recovery, each time it shows unlock, then the triangle with an exclamation point (so I can't backup, restore previous backup, anything)
I managed to grab SU 3.0 and force it to install over my existing 2.3.6, it did, sees my su (which is in system/bin which I've read is a problem ) as being outdated and wants to update it, fails each time.
So someone smarter than me please advise. My phone is functioning nicely without FCs or other issues, a normal boot or reboot goes fine, but I fear for the day I really need my backup. Not to mention frustrating that I seem to be locked out from making any changes now.
Thanks, Travis
Click to expand...
Click to collapse
You're "locked out" because you don't actually have root access. The OTA update chmods /system recursively (and as a result /system/bin and /system/xbin).
The triangle with the exclamation mark is the stock recovery (applied with the OTA update).
I'm not entirely sure what you've tried as it's a very easy process.
-Download CWM for your device - flash it using fastboot.
-Boot into recovery and flash the su binary via recovery. This will place the binary appropriately as well as chmod it.
-Done
-Profit?
krohnjw said:
You're "locked out" because you don't actually have root access. The OTA update chmods /system recursively (and as a result /system/bin and /system/xbin).
The triangle with the exclamation mark is the stock recovery (applied with the OTA update).
I'm not entirely sure what you've tried as it's a very easy process.
-Download CWM for your device - flash it using fastboot.
-Boot into recovery and flash the su binary via recovery. This will place the binary appropriately as well as chmod it.
-Done
-Profit?
Click to expand...
Click to collapse
Oddly I was getting the triangle intermittently from the get go, but I had been able to get around it by applying an earlier clockworkmod version in Rom Manager. I'm not able to do that now.
My whole problem is I'm unable to do anything at all in Fastboot. If I go to "recovery" to try and apply anything I get the triangle.
Am I missing something?
It does say "Lock State - Unlocked" in fastboot if that means anything.
sobamaflyer said:
Oddly I was getting the triangle intermittently from the get go, but I had been able to get around it by applying an earlier clockworkmod version in Rom Manager. I'm not able to do that now.
My whole problem is I'm unable to do anything at all in Fastboot. If I go to "recovery" to try and apply anything I get the triangle.
Am I missing something?
It does say "Lock State - Unlocked" in fastboot if that means anything.
Click to expand...
Click to collapse
Yeah, you have the stock recovery. You can't apply a new recovery through rom manager because the su binary doesn't have the appropriate permissions since the update.
Boot into the boot loader (Vol up and pwr). Don't go into recovery. Use fastboot from the boot loader to load CWM. Boot into CWM after flashed and flash the SU binary (mount /system first). After this boot up and delete/rename /etc/install-recovery.sh so that it won't overwrite CWM on each reboot. Install CWM again from Rom Manager or via fastboot (as it was overwritten on boot). Done.
Since you are being nice enough to try and help an id10t (apparently) and others may have the same issue and search this I'll ask the dumb questions. (I did a bit of googling a min. ago and found others with the same things I see but didn't get any further...).
When you say "go into Fastboot" you mean opening SDK Manager on my PC while I'm in the Boot Loader Screen?
At the bottom of the screen I see:
USB Control Init
USB Control Init End
[plug in usb get:]
STANDARD_SET_CONFIGURATION
Nothing shows up in SDK, I have the black CMD screen up but can't type anything at all in it?
......I did try loading pda_net (not sure what to do with that? but it was mentioned elsewhere) and I get a grey message at the bottom of the screen that says "FASTBOOT STATUS - FAILinvalid Command"
sobamaflyer said:
Since you are being nice enough to try and help an id10t (apparently) and others may have the same issue and search this I'll ask the dumb questions. (I did a bit of googling a min. ago and found others with the same things I see but didn't get any further...).
When you say "go into Fastboot" you mean opening SDK Manager on my PC while I'm in the Boot Loader Screen?
At the bottom of the screen I see:
USB Control Init
USB Control Init End
[plug in usb get:]
STANDARD_SET_CONFIGURATION
Nothing shows up in SDK, I have the black CMD screen up but can't type anything at all in it?
......I did try loading pda_net (not sure what to do with that? but it was mentioned elsewhere) and I get a grey message at the bottom of the screen that says "FASTBOOT STATUS - FAILinvalid Command"
Click to expand...
Click to collapse
Fastboot is merely a command line tool used for various operations on the device. Mainly though you'll use it to flash an image to a specific partition.
You'll need to boot the device into the boot loader (hold Vol up and power on).
Plug the device in via USB.
Open a command windows in the tools or platform-tools folder of the SDK (depending on your version of the SDK, where the fastboot.exe can be found) and issue the fasboot devices commmand. This should display the serial of any connected devices. If this comes back blank there is an issue with the installed driver. Reinstall the USB driver for the device using the supplied driver from an updated SDK.
Assuming fastboot devices shows one device you now can flash a recovery to the device. Download the appropriate recovery for your device (i9020(a), i9203 or NS 4G) http://mirror.sea.tdrevolution.net/cm/recoveries/. Place this file in the same directory for simplicity.
At this point you can flash your recovery.
fastboot flash recovery file.name.you.downloaded.img
If it is not in the same directory you can alternatively pass the full path to the image.
You now have a custom recovery installed. Select Recovery from the bootloader menu to now boot into this recovery.
Assuming you've already downloaded the su binary and it is on your SD card, mount /system from within CWM and then chose to install zip and select this from the SD card. You now have root access.
Now that a panic attack is settling...
I think I'm getting somewhere but not yet where I want to be. I go to Bootloader, I connect my USB and don't get anything different than above from my sdk tools menu (unusable cmd screen, fail showing on my phone). What does [eventually] work is going back to my "nexus S one click root" folder and clicking run.bat (as fastboot.exe and adb.exe in that folder also do the nothing).
This run.bat reads some sort of fail and boots my phone telling me that debugging is not checked (which it is) and takes me directly to there, then the cmd screen tells me to press enter when I've turned on the [already checked] usb debugging toggle.....what the hell I press enter. Now it goes into the old beautiful CWMR (3.0.xxxx) screen where I'm able to apply .zips, backup etc.
(luckily I think ahead and do a backup right this min.)
Then I go from that screen and decide to apply my new CM7.zip that started all this, I apply that and get a bootloop on the CM7 boot screen.......crap......I go clear my davlik and cache and install CM7 again. Same thing.....crap......
I try restoring my original backup from 9/5/11 I made right after first unlocking my phone.......CM7 bootloop screen.....dammmmiiiiit
I try restoring backup from 9/12 I made after getting everything just like I wanted it.......CM7 bootloop screen.......uh oh, panic beginning.
I restore the backup from a few lines ago, my phone comes back (thank god)
So:
-I have to have the right USB driver in my laptop because something from sdk ultimately talked to my phone?!
-Clockworkmod recovery 5.xxxx has never worked quite right for me, apparently 3.xxxx is still my magic answer?!
-Now that I've gotten this far should I try the same process to get back to my CWMR 3.xxxx screen and put some different files in my root to use than what I've done to this point?
....again, I apologize if I'm being myopic or asking dumb questions. I often say I only know just enough to be dangerous.
[SOLVED] - maybe/sort of
Between reading (and re-reading) the help above and continued research on my own I [think] I solved my problem.
I found the following 2 links:
http://theunlockr.com/2009/10/06/how-to-set-up-adb-usb-drivers-for-android-devices/
http://theunlockr.com/2010/12/17/how-to-root-the-samsung-nexus-s/
And basically started over from scratch, I deleted what I'd put in my pc and re-loaded using those instructions (in the right place, the right way). Doing this I was able to pull up a cmd window and this time it properly accessed my phone. I got it to fastboot recovery - load CWM 5.0... and from there got into my recovery menus on my phone this time.
One curious thing....I tried the part VI in "how to root the samsung" ...""stop the phone uninstalling the custom recovery image"...... I've tried several things there but still get an error that it is read only.
....I went on to install CM7, and it consequently updated right after to the latest CM7, At this moment I have full permissions, superuser access, was able to make a backup of yesterday, the CM7 this morning and then CM7.1.0.1 that loaded.
Will I ultimately have the same issue as before? But be able to overcome it in the same manner when I want to?
Thanks for the help
This is why one click methods are bad. When a problem arises you have no clue what to do because a software did it for you the first time. Glad you got it figured out.
Sent from my Nexus S 4G using xda premium
Hello.
Today my oneplus one was suddenly stuck in bootloop. This happened in the middle of the day when I rebooted my phone. My phone was running the latest update that came OTA (stock lollipop). Whenever I boot my phone it starts loading and suddenly a Chrome (browser) window appears for 1 second and tries to load a website. Afterwards my lock screen pop ups for 1 seconds and it starts to reboot. During the lockscreen I tried to unlock my phone as soon as possible, but it just reboots. (Any ideas about this weird problem?)
I CAN boot it in recovery mode by holding volume-down button and power button.
I CAN boot it in fastboot mode by holding volume-up button and power button.
Perhaps a factory reset will do the trick, but I don't have a backup of my files (because this happened so suddenly without me trying to flash/customize my phone). My first priority is recovering my files, because most solutions will end up in me losing every file. Unfortunately I've found little possibility to do this during the bootloop problem. I've tried to flash TWRP because it could make backups of my phone. I tried it through ADB/Fastboot, but it failed because my device is not unlocked (I can't go to settings and put my phone in developer mode and debugging mode). So I've read somewhere that unlocking my phone (bootloader?) through ADB will wipe my phone, which is exactly what I don't want.
Also I've tried this: http://forum.xda-developers.com/oneplus-one/help/fix-brickloop-audio-fx-fc-efs-corrupt-t2879061
But It also failed because my device was not unlocked.
Did I miss some steps somewhere or did I read something wrong?
Hopefully anybody has an idea to either fix the bootloop without losing my data, or finding a way to recover my files before wiping the phone.
Thank you.
RightHanded said:
Hello.
Today my oneplus one was suddenly stuck in bootloop. This happened in the middle of the day when I rebooted my phone. My phone was running the latest update that came OTA (stock lollipop). Whenever I boot my phone it starts loading and suddenly a Chrome (browser) window appears for 1 second and tries to load a website. Afterwards my lock screen pop ups for 1 seconds and it starts to reboot. During the lockscreen I tried to unlock my phone as soon as possible, but it just reboots. (Any ideas about this weird problem?)
I CAN boot it in recovery mode by holding volume-down button and power button.
I CAN boot it in fastboot mode by holding volume-up button and power button.
Perhaps a factory reset will do the trick, but I don't have a backup of my files (because this happened so suddenly without me trying to flash/customize my phone). My first priority is recovering my files, because most solutions will end up in me losing every file. Unfortunately I've found little possibility to do this during the bootloop problem. I've tried to flash TWRP because it could make backups of my phone. I tried it through ADB/Fastboot, but it failed because my device is not unlocked (I can't go to settings and put my phone in developer mode and debugging mode). So I've read somewhere that unlocking my phone (bootloader?) through ADB will wipe my phone, which is exactly what I don't want.
Also I've tried this: http://forum.xda-developers.com/oneplus-one/help/fix-brickloop-audio-fx-fc-efs-corrupt-t2879061
But It also failed because my device was not unlocked.
Did I miss some steps somewhere or did I read something wrong?
Hopefully anybody has an idea to either fix the bootloop without losing my data, or finding a way to recover my files before wiping the phone.
Thank you.
Click to expand...
Click to collapse
Unfortunately you might be stuck in a catch-22 situation here. In order to access the files you'd need to unlock the bootloader, but in doing so you'd lose those files. Without usb debugging already enabled I can't see a way out of this.
Decided to unlock the bootloader through ADB. (bye bye data)
After I've unlocked it, I've tried installing TWRP.
Some minor problems occured but I can finally boot into TWRP through volume-down button + power button.
I've decided to download the stock ROM i've found on the OPO forums.
Couldn't acces my phone through normal methods, so I had to use ADB to push the files into my phone.
Installing the file through TWRP, wiped cache/dalvik and installed super user before rebooting.
After rebooting my phone is stuck on the boot screen now. (This also happened before I installed TWRP on my phone)
I've also tried this method: http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
Also no succes. I'm stuck in the bootscreen where it says 'cyanogen'.
EDIT: Managed to fix it eventually through: http://forum.xda-developers.com/oneplus-one/help/fix-brickloop-audio-fx-fc-efs-corrupt-t2879061 (part 2) writing the command in TWRP.
Phone finally boots normally again.
RightHanded said:
Decided to unlock the bootloader through ADB. (bye bye data)
After I've unlocked it, I've tried installing TWRP.
Some minor problems occured but I can finally boot into TWRP through volume-down button + power button.
I've decided to download the stock ROM i've found on the OPO forums.
Couldn't acces my phone through normal methods, so I had to use ADB to push the files into my phone.
Installing the file through TWRP, wiped cache/dalvik and installed super user before rebooting.
After rebooting my phone is stuck on the boot screen now. (This also happened before I installed TWRP on my phone)
I've also tried this method: http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
Also no succes. I'm stuck in the bootscreen where it says 'cyanogen'.
Any other way to fix this problem?
Click to expand...
Click to collapse
Exactly what did you flash? Full filename please. No errors occurred?
Heisenberg said:
Exactly what did you flash? Full filename please. No errors occurred?
Click to expand...
Click to collapse
Hopefully the stock cyanogen OS.
First I've tried to flash cyanogenmod 12 through TWRP (file is found here: https://forums.oneplus.net/threads/cm12s-yng1tas17l-installation-guide-review-change-log.304615/)
Afterwards I was still stuck in bootscreen, so I've looked for another solution.
Which made me find this guide: http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
After flashing this file (probably the same thing) the problem still remained.
Eventually after multiple wipes/factory resets (which did not solve the problem) I've entered the command in TWRP and after reboot it finally worked again.
So I basically flashed my phone twice, once through TWRPS and the other through the batch file (perhaps ADB?).
Also no errors occured which stopped the flashing and commands. Did have to reinstall TWRP and reboot instantly in it by holding the volume down button multiple times. This doesnt happen anymore though.
Only had to install google apps for CM12 (gapps), for which I used TWRP in recovery mode.
Currently reinstalling most apps on my phone and no problems yet.
So I was interested in getting a root, did fastboot boot twrp.img, the version you get from shakala's megaupload page and tried to do a mtp mount to copy the supersu in. That didn't work because I'm on mac and I rebooted... surprise phone doesn't boot. It's just stuck on the 'asus, in search of incredible' screen that comes up 1 second after booting.
Tried to instead flash twrp to recovery, no dice, black screen. Tried flash stock recovery from the shakala's page, I get the droid belly up with an exclamation mark over the open belly...
Tried fastboot boot twrp.img and then sideload the actual OTA firmware, no dice. It won't even try to flash and just gives the 1001 error.
I have tried and unpacked 3 different stock images I've found
UL-ASUS_A001-WW-14.1010.1702.36-user.zip
UL-ASUS_A001-WW-14.1010.1703.42-user.zip
UL-ASUS_A001-WW-14.1010.1704.46-user.zip
and flash the sytem.new.dat to the system partition, no dice again. Phone just doesn't boot.
TL;DR
Something got wonky, phone doesn't boot
Recovery is broken, flashing stock recovery from shakala's page produces belly-up-android image
Without stock recovery, I can't sideload a full system update...
Halp? Ideas?
Got a little bit progress...
The TWRP black screen can be fixed by just turning off the display via the power button and then pressing it again, and you can see the twrp. Looks like even the normal one
Next hurdle was that /cache and /system couldn't be mounted for sideloading so in the end I had to go to the adb shell and format them manually. Then the wiping of system was possible and there were no more errors from TWRP.
So I went ahead and tried sideloading again, it put the image in nicely and everything looks good. Go to reboot screen and it say 'no OS installed'.
I guess those 1.7G images don't exactly have the full OS so a /system formatted Zenfone 3 Ultra can't be restored from those?
Alrighty, got stuff working. Sharing for people who might run into this later.
At this time, you need the stock recovery working to be able to `adb sideload` a full image. The TWRP goes to 50% and then actually doesn't unconditionally push the stock ROM into the partition. I saw the difference when using TWRP/Stock Recovery.
My biggest failure was not to recognize that the green android belly up with an exclamation mark on top of it actually meant that the stock recovery was working. You have to do a little bit more finger juggling to actually enter the recover commands section of the recovery. Mainly after the android appears, volume up+power for a few seconds, release volume up. Illustrated here:
https://www.asus.com/zentalk/in/thread-121896-1-1.html
From the stock recovery, you can then wipe caches and start adb sideload, and using your pc to sideload the image (or from sd card if you so wish).
blosphere said:
I guess those 1.7G images don't exactly have the full OS so a /system formatted Zenfone 3 Ultra can't be restored from those?
Click to expand...
Click to collapse
I can testify that the 1.7G image contains a full OS on /system.
If you read META-INF/com/google/android/updater-script inside the UL-ASUS_A001-WW-14.1010.1704.46-user.zip, you will see the official recovery do use system.transfer.list and system.new.dat in the zip to flash /dev/block/bootdevice/by-name/system.
Recovery is broken, flashing stock recovery from shakala's page produces belly-up-android image
Click to expand...
Click to collapse
When you see the belly-up-android image, press Power + Volume-Up. The stock recovery menu comes up. I was confused at the beginning, too.
From you id Tokyo, did you buy the phone in Japan? If so, it is a JP_Phone, and need some tweak to the initrd in boot.img to flash WW firmwares.
Oh, glad to see you've already solved it! You might want to mark the thread title as "[SOLVED]".
So on my OnePlus Nord CE 2 Lite I was trying to root it. So I did everything extracted the boot image, patched it, flashed it and when my phone starts up it shows this boot animation and then it asks me for my pin. But when i try to input it the nothing happens the touch screen is not recognizing my touches. It can't be a hardware issue because I got the phone today and it worked like an hour ago before doing the rooting. When i boot into the pin screen and try to use adb to reboot it says: error: insufficient permissions for device. Then after a while the phone reboots so this is practically a boot loop. When i try booting up the phone it is really weird it starts the boot up process after a while and it shows the android and OnePlus booting screen then it has the red dot with the white dots going around it and then a black screen and then it either restarts again or it shows the pin screen.
I followed this guide: https://forum.xda-developers.com/t/rooting-oneplus-nord-2-ce-lite.4500297/
...download the correct firmware version for your device (EU / India), bring up fastboot, change slot, flash firmware and done ...the only thinkable reason is, you didn't wait until the phone downloaded the OTA update after unpacking it "one hour" before
I tried to wipe data but then I got stuck on a screen that requires a verification code that I obviously can't enter. And I can't reboot I have tried everything. When I hold the power button and nothing happens at all. I guess I have to wait for the battery to run out.
Okay, so now I got out of that using vol+ and power. But now I realized that the problem is that I had a different version of the boot image compared to other partitions. For example the boot image is like version 3.27 but everything else is version 2.85 (Those aren't actual versions just an example) But when I try to flash the system, vendor and product image it says: remote: '(system_a) No such partition'
or whatever image I'm trying to flash like product_a or vendor_a
Everything else works just those don't and the phone boots into recovery mode but I still can't use touch controls.
use "OppoRealme-OFP-Flash_1.0-x64_Windows" it will flash every thing.
//edit : one time it worked.
After i bricked in again. It's not working. Boot loops