[Q] How to re-download ICS? - Motorola Atrix 2

I already downloaded ICS but while i was restoring some apk with titanium backup i deleted one of the system stock apk.... Even after factory reset it wouldn't recover it .......... Is there a way to re-download the stock ics on the phone?

devil_2 said:
I already downloaded ICS but while i was restoring some apk with titanium backup i deleted one of the system stock apk.... Even after factory reset it wouldn't recover it .......... Is there a way to re-download the stock ics on the phone?
Click to expand...
Click to collapse
What exactly is your phone doing? Does it boot normally and you are just missing an app? Or it's bootlooping, and you can only access stock recovery?
If you can boot normally into the homescreen, then it may be fixable..
You can not re-install the ICS upgrade package while on ICS (and stock recovery wouldn't help you anyway).
If you can not even boot the phone, then... check the dev section - I think some new scripts and instructions were just released (here - but there's also some good info in the original thread in the general section) for restoring your phone and re-installing the official at&t ICS.

alteredlikeness said:
What exactly is your phone doing? Does it boot normally and you are just missing an app? Or it's bootlooping, and you can only access stock recovery?
If you can boot normally into the homescreen, then it may be fixable..
You can not re-install the ICS upgrade package while on ICS (and stock recovery wouldn't help you anyway).
If you can not even boot the phone, then... check the dev section - I think some new scripts and instructions were just released (here - but there's also some good info in the original thread in the general section) for restoring your phone and re-installing the official at&t ICS.
Click to expand...
Click to collapse
I can boot normally but i am missing the app... um can you provide me please with a link for a guide to fix my prob?

devil_2 said:
I can boot normally but i am missing the app... um can you provide me please with a link for a guide to fix my prob?
Click to expand...
Click to collapse
What app are you missing??
Sent from my ME865 using xda app-developers app

Related

Help - Xoom stuck in boot animation

I was trying to change the clock font by copying new fonts and renaming the current fonts. I thought I did everything ok. But upon reboot my Xoom is not stuck on the honeycombing boot animation.
I have tried several reboots and keep getting stuck at the boot animation.PS I have a rooted 3.2 wifi only stock US ROM on a Canadian Xoom.
How can I get things back to the way it was before my bonehead move? I renamed all the stock font files with a -back so they are there. I just need access to get the files in the oder they were.
Help please!
If you can get it into android recovery mode then you can flash a rom file, such as the stock rooted 3.2 and that should fix it no problem. And if you have troubles with that the idk what to tell ya man.
Sent from my MB855 using XDA App
Can you not reflash the rom?
I was hoping not to have to reflash, but in the end that is exactly what I did. I reflashed a stock 3.2.1 image. Curiously, only a few of my apps auto installed. I had to manually go to the market and rechoose every other one.
Titanium backup. It can save your need of installing installed apps with one click.
jerrycycle said:
Titanium backup. It can save your need of installing installed apps with one click.
Click to expand...
Click to collapse
Just make sure that you only do a batch restore of missing apps and data--not system apps and data. That will screw you up.

[Q] ClockWorkMod recovery "Error while restoring /system!"

Well i am new to android custom ROM i was using my official gingerbread 2.3.6, I rooted my samsung galaxy ace and installed Clock work mod Recovery v5.0.2.6
I took the complete back up of my android os using it with reference to some youtube tutorials. Everything went fine and it showed backup sucessfully created like in the video. I even could install a custom ROM and run it on my phone.
When i started to restore from my backup ... during the time when it is restoring system , after a while it shows the error "Error while restoring /system!"
can anyone help me out to get my official copy of gingerbread back....??
Any HELP is appreciated....!!!!
Thank you in advance...
You can only use CWM to restore the system image for the Rom you're currently on. You need to flash back to GB and then use your nandroid to restore your setup.
Did you installed ICS firmware? Because gingerbeard can't run on ICS firmware
Hey thanks for the help.....
i got the problem fixed by installing gingerbread os first and then recovered from clockwork mod recovery......
Now i have all my files and same os that i have backed up!!!
Is it so that you cant resotre a ICS backup when current roms is Jelly Bean?
killbox said:
Is it so that you cant resotre a ICS backup when current roms is Jelly Bean?
Click to expand...
Click to collapse
Yes if you do you are bricked, at least for my phone.
Sent from my SGH-T959 using xda app-developers app
iKoolkid said:
Yes if you do you are bricked, at least for my phone.
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
I found this with both JB and GB ROMs trying to restore ICS but the problem is resolved the way previous posters have stated install rom of correct android version then restore.. or else your bricked.. and its akward being bricked in greece on holiday with no computer...
Ok, then I have to look for a ARHD 4.1.0 version. (android 4.0.4).
somebody can help me?
I been on ICS, put wrong boot.img via CMD to my HTC Sensation XL. now I'm stuck on Fastboot screen and cant recover anything.. how to fix it? pls guide step by step, because I am noob.. on Fastboot screen I see:
*** UNLOCKED ***
RUNNYMEDE PVT SHIP S-ON
HBOOT-1.25.0004
RADIO-3822.10.10.12_M
eMMC-boot
Oct 20 2011,00:20:33
NijoBaby said:
Hey thanks for the help.....
i got the problem fixed by installing gingerbread os first and then recovered from clockwork mod recovery......
Now i have all my files and same os that i have backed up!!!
Click to expand...
Click to collapse
Can u plzz post the link from where u downloaded the GB firmware..!!
and also to flash to through odin.! a link will also be appreciated.
GALAXY ACE
CM 7.
MissionImprobable said:
You can only use CWM to restore the system image for the Rom you're currently on. You need to flash back to GB and then use your nandroid to restore your setup.
Click to expand...
Click to collapse
I am having the same error. On Lollipop custom rom, trying to restore Kitkat CWM backup. Then, i get error while restoring /system. So, I flash the same custom kitkat rom, where my backup is based on. Reboot and went through initial rom setup and confirmed it's running Kitkat and same firmware as the CWM backup I was trying to restore. Reboot in Philz CWM and proceed to restoring that back up and i am having the exact same error (error while restoring /system!). I checked on the CWM log, it says "tar: invalid tar magic". Does anyone have any idea?

[Q] issue with nand backup

I have a problem with the backup - fails to restore, a backup file looks like this: see attach file
i can't restore this backup,it's tell me "system error".... so i trying open "data.ext4.tar.a" on PC, like you see i try UNYAFFS utility, also fail..
-- note, all "normal" files are empty,i already try change extension to file with data, always the same --- ERROR
any idea?
thanks to all who help
porusski said:
I have a problem with the backup - fails to restore, a backup file looks like this: see attach file
i can't restore this backup,it's tell me "system error".... so i trying open "data.ext4.tar.a" on PC, like you see i try UNYAFFS utility, also fail..
-- note, all "normal" files are empty,i already try change extension to file with data, always the same --- ERROR
any idea?
thanks to all who help
Click to expand...
Click to collapse
please guys, someone? i have vital data on this backup
have you tried replacing these files by a similar backup? maybe this might work if you use the same rom to get it started again
Starship706 said:
have you tried replacing these files by a similar backup? maybe this might work if you use the same rom to get it started again
Click to expand...
Click to collapse
i'm not, i have super brick.... so i just want open those files and get the data
Sorry to hear that...
I guess if you cannot open these files to extract the files you have a big problem. No other backups available like in googlemail?
Unfortunately no
I just saw this. Let me take a good look.
Sent from my SCH-I405 using xda premium
---------- Post added 16th October 2012 at 12:02 AM ---------- Previous post was 15th October 2012 at 11:59 PM ----------
Give me details. What phone and os. Also, why are you restoring from your PC? Can you get your phone into cwm or similar recovery? What started this problem or what was the last thing you did successfully.
Sent from my SCH-I405 using xda premium
Hey, phone was SGS2, i 'm trying restore from PC because i got super brick - my phone is dead, i need replace motherboard.
First i was install stock rom 4.0.4 with Odin, everything worked fine, so i make backup with cwm and install JB 4.1 - non official, also everything worked fine, after this i remembered that i have forgot some files in stock rom,so i make new backup to JB rom and reinstall stock rom from backup that i make before -- until this stage everything fine. Now i wanted return to JB rom and i try flush backup through cwm and i got error - something like "system image error", so i flush it from begining -just clean rom..
After this i remember that i again forgot some files in stock rom, so again, flush stock from backup trough cwm, after i try back to JB rom trough cwm - like in first time,no success, so i try also like in first time - clean install.. in middle of progress phone just shutdown and dead...
Thank for helping
P.S
After first time that i cannot reinstall JB rom trough cwm i thought that backup doesn't performed correctly, so i make new one.. all those file from second backup, the rom was JB 4.1 with Siya kernel
Yeah umm. I think you lost power during your flash at an early state. Could be wrong but how could you flash a Ron and realize you didn't have some files? Was it your own build?
Sent from my SCH-I405 using xda premium

[Q] Restoring through CWM to stock

hi,i am using stock rom running 4.0.4,i had it rooted too and now i had two queries
1)Is rom manager compatible with Atrix 2??
im asking this because when i open it, it shows u need to install CWM recovery...but no option in that responds...not even intall cwm (1st option in menu)....so i installed CWM using atrix boot strapper app and now still rom manager is not detecting CWM..please help
2)after installing CWM, i had backup my present stock rom..so if i flash a new rom now will that CWM and back up still exist??(because we will wipe data which will remove everyhting right??)
for suppose if i flash jelly bean rom and if i dont like it...can i restore my previous stock rom without bricking my device??
thanks for u r help
vdpraneeth said:
hi,i am using stock rom running 4.0.4,i had it rooted too and now i had two queries
1)Is rom manager compatible with Atrix 2??
im asking this because when i open it, it shows u need to install CWM recovery...but no option in that responds...not even intall cwm (1st option in menu)....so i installed CWM using atrix boot strapper app and now still rom manager is not detecting CWM..please help
2)after installing CWM, i had backup my present stock rom..so if i flash a new rom now will that CWM and back up still exist??(because we will wipe data which will remove everyhting right??)
for suppose if i flash jelly bean rom and if i dont like it...can i restore my previous stock rom without bricking my device??
thanks for u r help
Click to expand...
Click to collapse
1) Rom manager is not compatible with Atrix 2. I would not use it. Why do you need it anyway??
You can use Atrix Bootstrapper to go into CWM recovery . Rest can be done there. Or you can use Boot Menu Manager.
2)Of course! it will still be there! the backup is saved on your SD Card. So as long as you don't format your SD Card. It will be there.
NHS2008 said:
1) Rom manager is not compatible with Atrix 2. I would not use it. Why do you need it anyway??
You can use Atrix Bootstrapper to go into CWM recovery . Rest can be done there. Or you can use Boot Menu Manager.
2)Of course! it will still be there! the backup is saved on your SD Card. So as long as you don't format your SD Card. It will be there.
Click to expand...
Click to collapse
Rom Manager does work with Atrix2. If you're on Stock ICS, you can install CWM on every boot, then flash the Bionic recovery through Rom Manager. That will allow you to use the 1 touch backup in RM, just hit backup rom and everything does what it's supposed to.
Here is the CWM on every boot for Stock ICS.
NHS2008 said:
1) Rom manager is not compatible with Atrix 2. I would not use it. Why do you need it anyway??
You can use Atrix Bootstrapper to go into CWM recovery . Rest can be done there. Or you can use Boot Menu Manager.
2)Of course! it will still be there! the backup is saved on your SD Card. So as long as you don't format your SD Card. It will be there.
Click to expand...
Click to collapse
2)will the CWM recovery exist after flashing new rom or i need to install it again??
when i restore to stock fom JB, it means downgrading the firmware right??
so will there be a chance of bricking or is it same to restore anytime from any version??
vdpraneeth said:
2)will the CWM recovery exist after flashing new rom or i need to install it again??
when i restore to stock fom JB, it means downgrading the firmware right??
so will there be a chance of bricking or is it same to restore anytime from any version??
Click to expand...
Click to collapse
No, your Recovery will be wiped after you flash a new rom, but you can install it again and restore your ROM.
But when restoring a rom, make sure you ARE ON THE ROM you are restoring.
E.g. If you flash JB and want Stock ICS back with your backup. First flash the Stock ICS from RSD and then restore your backup from CWM on it.
Or Vice-Versa.
@41rw4lk, Thanks for rectifying that. I did not bother with Rom Manager much.
NHS2008 said:
No, your Recovery will be wiped after you flash a new rom, but you can install it again and restore your ROM.
But when restoring a rom, make sure you ARE ON THE ROM you are restoring.
E.g. If you flash JB and want Stock ICS back with your backup. First flash the Stock ICS from RSD and then restore your backup from CWM on it.
Or Vice-Versa.
@41rw4lk, Thanks for rectifying that. I did not bother with Rom Manager much.
Click to expand...
Click to collapse
but downgrading to stock ICS from JB will brick my mobile right??
is there any problem if im not on the rom im restoring??
(im a newbie and i dont know much..even not found these after searching a lot..thats the reason im asking all these)
41rw4lk said:
Rom Manager does work with Atrix2. If you're on Stock ICS, you can install CWM on every boot, then flash the Bionic recovery through Rom Manager. That will allow you to use the 1 touch backup in RM, just hit backup rom and everything does what it's supposed to.
Here is the CWM on every boot for Stock ICS.
Click to expand...
Click to collapse
how is it possible to flash bionic recovery through RM...all the menu options are disabled for me there even after CWM installed through bootstrap
vdpraneeth said:
2)will the CWM recovery exist after flashing new rom or i need to install it again??
when i restore to stock fom JB, it means downgrading the firmware right??
so will there be a chance of bricking or is it same to restore anytime from any version??
Click to expand...
Click to collapse
I don't think any recovery exist after flashing a new rom. We have a locked bootloader, so we can't replace the stock recovery.img, all of our recoveries hijack the boot process to work. CM10 and PA I believe have a built in recovery, and that's about as close as you'll get to having a recovery exist after flashing a rom.
As far as restoring from JB, I believe you can downgrade to ICS, but you'll have to look at the JB thread to be certain. I'm on AT&T so I haven't had an opportunity to try JB (officially). CM10 is based on JB, but for our phone with the locked bootloader, it's more of a pseudo experience and is based on our ICS framework.
As for bricking, there is always a chance to brick, that's part of the mod game, but if you read and pay attention to what you have and what you're doing, you'll be alright.
vdpraneeth said:
but downgrading to stock ICS from JB will brick my mobile right??
is there any problem if im not on the rom im restoring??
(im a newbie and i dont know much..even not found these after searching a lot..thats the reason im asking all these)
Click to expand...
Click to collapse
UNLESS you have AT&T phone you should be just fine with ref lashing the ICS.
YES. there is a big problem if you are not on a ROM you are restoring.
Its like you are trying to comlete your jigsaw puzzle by putting pieces from some another jigsaw puzzle.
vdpraneeth said:
how is it possible to flash bionic recovery through RM...all the menu options are disabled for me there even after CWM installed through bootstrap
Click to expand...
Click to collapse
You need to use the CWM on every boot setup, the Atrix2Bootstrap alone won't do.
41rw4lk said:
You need to use the CWM on every boot setup, the Atrix2Bootstrap alone won't do.
Click to expand...
Click to collapse
yes...my phone is an AT&T version...though im using it with IDEA.....
so if i install CWM on every boot,then rom manager will detect it and work right??
vdpraneeth said:
yes...my phone is an AT&T version...though im using it with IDEA.....
so if i install CWM on every boot,then rom manager will detect it and work right??
Click to expand...
Click to collapse
Yes. I will say though, if you're on an AT&T branded phone with AT&T firmware, do NOT try to flash the new JB FXZ. It doesn't matter who your carrier is, it matters what firmware your phone is using. So, if you're on AT&T then you need to make sure that the things you flash are for AT&T, or else you will brick and that will be then end of that.
41rw4lk said:
Yes. I will say though, if you're on an AT&T branded phone with AT&T firmware, do NOT try to flash the new JB FXZ. It doesn't matter who your carrier is, it matters what firmware your phone is using. So, if you're on AT&T then you need to make sure that the things you flash are for AT&T, or else you will brick and that will be then end of that.
Click to expand...
Click to collapse
thanks a lot...
what are the ROMS avaialble for us???
can i reflash stock ICS from any of those ROMS safely??
thank you
vdpraneeth said:
thanks a lot...
what are the ROMS avaialble for us???
can i reflash stock ICS from any of those ROMS safely??
thank you
Click to expand...
Click to collapse
CM10
PA
Numa
MIUI (had battery issues, but I think they got it all worked out)
there's a few, you'll just have to look. Most of the time, if something is not meant for AT&T, the devs will post in the description that it isn't compatible. If you want stock ICS back at anytime, you can do yourself a favor and make a backup of your stock ICS all setup the way you like it, so you can restore if needed. If all else fails, there is an Official ICS FXZ that will get you back to stock ICS.
41rw4lk said:
CM10
PA
Numa
MIUI (had battery issues, but I think they got it all worked out)
there's a few, you'll just have to look. Most of the time, if something is not meant for AT&T, the devs will post in the description that it isn't compatible. If you want stock ICS back at anytime, you can do yourself a favor and make a backup of your stock ICS all setup the way you like it, so you can restore if needed. If all else fails, there is an Official ICS FXZ that will get you back to stock ICS.
Click to expand...
Click to collapse
my main question is :
will downgrade to ICS cause brick??
how do i create my own backup for stock ICS??
vdpraneeth said:
my main question is :
will downgrade to ICS cause brick??
how do i create my own backup for stock ICS??
Click to expand...
Click to collapse
You're killing me smalls. You're on ICS already, you're not downgrading anything, nor can you downgrade ie. Gingerbread. There is no Official JB for AT&T, so that's not an issue. CM10 is a JB based rom built on an ICS frame, (for our phone at least), and again, you're not downgrading.
To make a back up, boot in to CWM or whatever recovery you're using (not stock), and click backup. You might hit up the noob thread to get an idea of the terminology and basics for our device. Not trying to be rude, but you're running yourself in circles. You got to walk before you can run.

How to re-flash stock JB rom with OTA (custom recovery)

Hi,
I have a question.
I already flash 4.1.1 via OTA and use some bloody init.d script for R/W system, that doesnt work and gives me reboot after I enter into supersu app.
My question is... how can i flash 4.1.1 again (i wanna clean system, just for better feeling.) If Im using TWRP recovery? Because, ota file doesnt contain stock recovery as RUU does and I didnt find any ruu for 4.1.1 CID_032 | villec2.
Or, can I flash OTA update as update.zip in TWRP recovery?
sorry, for my bad english.
Step 1: relock the bootloader (check out some xda forums). This is a pretty easy process.
Step 2: find your desired stock jb online.
Step 3: connect your phone to the pc (make sure you have the htc drivers installed).
Step 4: run the RUU or stock file as an exe. An installation guide will follow, just follow it through.
It should work after this!
If you have questions or run into problems, let me know!
Sent from my One S
JohnKoeMan said:
Step 1: relock the bootloader (check out some xda forums). This is a pretty easy process.
Step 2: find your desired stock jb online.
Step 3: connect your phone to the pc (make sure you have the htc drivers installed).
Step 4: run the RUU or stock file as an exe. An installation guide will follow, just follow it through.
It should work after this!
If you have questions or run into problems, let me know!
Sent from my One S
Click to expand...
Click to collapse
Thanks, but I think there's misunderstanding. I know how to use adb - relock, etc.
My point is, that I have android 4.1.1 (updated via OTA) and I wanna re-flash this with same android - 4.1.1 (due to I've installed a script that doesnt work - Easy_InitD_1.1.zip... and makes me couple of reboots. And I would prefer to have a clean rom, without any "possible future" problems.
Damn, I think Im getting worse, isn't this true? =D
edit: bloody RUU for JB would solve my problem, but it doesnt exist, yet.
Impo5sible said:
Thanks, but I think there's misunderstanding. I know how to use adb - relock, etc.
My point is, that I have android 4.1.1 (updated via OTA) and I wanna re-flash this with same android - 4.1.1 (due to I've installed a script that doesnt work - Easy_InitD_1.1.zip... and makes me couple of reboots. And I would prefer to have a clean rom, without any "possible future" problems.
Damn, I think Im getting worse, isn't this true? =D
edit: bloody RUU for JB would solve my problem, but it doesnt exist, yet.
Click to expand...
Click to collapse
Haha no problems friend!
I've found a link to a custom ROM using JB 4.1.1, you can look into that?
http://forum.xda-developers.com/showthread.php?t=1871866
Also you can instead remove TWRP (if you know how) and instead install CWM (clockworkmod).
I found CWM to work better than TWRP.
I myself am using CyanogenMod 10.1, very nice and clean, works perfectly ad has Android 4.2.1
That might also be an option if you want a clean ROM. ^^
I think you're missing something here.
The fact is that there is no original JB RUU that can be pushed to phones already after JB OTA, which updated their phone to custom ROM and want's to go back to stock now.
Running an ICS RUU will do no good since it will fail based on lower Hboot version.
My recommendation, therefore, is to use as close to stock JB ROM like http://forum.xda-developers.com/showthread.php?t=2076855.
I will choose to go back to TrickDroid 9.1 if I had to.
Another option if no RUU is available is to get a nandroid done on the JB OTA just after flashing and rooting. And restore it.
orenfl said:
I think you're missing something here.
The fact is that there is no original JB RUU that can be pushed to phones already after JB OTA, which updated their phone to custom ROM and want's to go back to stock now.
Running an ICS RUU will do no good since it will fail based on lower Hboot version.
My recommendation, therefore, is to use as close to stock JB ROM like http://forum.xda-developers.com/showthread.php?t=2076855.
I will choose to go back to TrickDroid 9.1 if I had to.
Another option if no RUU is available is to get a nandroid done on the JB OTA just after flashing and rooting. And restore it.
Click to expand...
Click to collapse
Since I'm facing the same problem, and there is no RUU for now, how and where to get a JB OTA nandroid... Haven't seen any around.
Impo5sible said:
Thanks, but I think there's misunderstanding. I know how to use adb - relock, etc.
My point is, that I have android 4.1.1 (updated via OTA) and I wanna re-flash this with same android - 4.1.1 (due to I've installed a script that doesnt work - Easy_InitD_1.1.zip... and makes me couple of reboots. And I would prefer to have a clean rom, without any "possible future" problems.
Damn, I think Im getting worse, isn't this true? =D
edit: bloody RUU for JB would solve my problem, but it doesnt exist, yet.
Click to expand...
Click to collapse
I had the same problem and no stock jb nandroid to go back to. Luckily I kept ics nandroid in my laptop, restore that and run OTA jb update again.
There is another option. Get Zenrom ICS, check for updates, download jb, install and then do factory reset. Then root it ( superuser, busybox, modified boot.img), make system back up and keep it in pc. Then you have it safe and you can go back to it if you need full stock jb.
I hope this will help.
Sent from my HTC One S using xda app-developers app
tominozh said:
I had the same problem and no stock jb nandroid to go back to. Luckily I kept ics nandroid in my laptop, restore that and run OTA jb update again.
There is another option. Get Zenrom ICS, check for updates, download jb, install and then do factory reset. Then root it ( superuser, busybox, modified boot.img), make system back up and keep it in pc. Then you have it safe and you can go back to it if you need full stock jb.
I hope this will help.
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
So I'll be able to install Zenrom ICS on JB stock with hboot 2.15?
bo6o said:
So I'll be able to install Zenrom ICS on JB stock with hboot 2.15?
Click to expand...
Click to collapse
Yes, you should be. Download zenrom, reboot recovery, wipe everything a few times, flash zenrom, set it up, then recovery, flash STOCK RECOVERY ( very important), prompt for update, download, install, set up, ( you may get a few errors here and there so just do factory reset in setting-->factory reset). Then flash twrp, flash superuser, backup.
Sent from my HTC One S using xda app-developers app

Categories

Resources