Database Info

Pantech Burst CM10 Discussion Thread

To Some clean space to Our beloved devs I made this thread for all the questions , reviews , problems , etc . Before Posting anything Please look into these resources or Quick Google your doubt , if not found than ask here .
OFFCIAL CM10 DEVELOPMENT THREAD
GENERAL PANTECH BURST DISCUSSION THREAD
[INDEX]EVERYTHING FOR PANTECH BURST
Working -
Everything For Daily Driver
Whats not working :-
CLICK ME :fingers-crossed:
Download Links :-
CM10 [PulicRelease] - HERE
Gapps for JB 4.1.x - HERE
Click to expand...
Click to collapse
::: INSTALLATION PROCEDURE :::
-First of all , If In case Any loss happened Neither the Dev team or me is responsible for that . Though Nothing should happen 99.9% .
-Boot into CWM Recovery . Either 5.x or 6.x ( by Attn1 one [Preferred]) . Everything will be safe . Don't believe in any myths of cwm 6.x is dangerous and all . For reference -> These recoveries are one my self tested .
-Clear Wipe Data / Factory reset and clear dalvik cache from advance menu .
-Install from SD/EXT-Sd ( Where you put simply select that one)
-Choose zip and confirm action .
- Flash Gapps
-Reboot .
Optional :
-Give thanks and help the DEV team by donations
----
Before any questions make sure you googled your question thoroughly and scanned this URL and made sure your problem's solution don't lie there
UPDATE :
CM11 and new recoveries .

dpwguenther said:
is it safe to flash without downgrading to GB , just as cm?
Click to expand...
Click to collapse
Yup it is safe to flash over ICS . I did on cm5.x But I think that doesn't matter .

ujjwalchhabra said:
Yup it is safe to flash over ICS . I did on cm5.x But I think that doesn't matter .
Click to expand...
Click to collapse
ive noticed that the latest build of cm10 has popup error that the other one didnt have , it was something about android.core has stopped

Ive updated the wiki to include this discussion

If I find a cm10 mod for another phone, like a 5 button shortcut lockscreen or changing the lockscreen font, can I use it with this cm10 ?
Sent from my PantechP9070 using xda app-developers app

dpwguenther said:
If I find a cm10 mod for another phone, like a 5 button shortcut lockscreen or changing the lockscreen font, can I use it with this cm10 ?
Sent from my PantechP9070 using xda app-developers app
Click to expand...
Click to collapse
You need to use go locker and theres a theme on the play store that almost copys our lockscreen on the ics update. https://play.google.com/store/apps/...W5vdGVjaC5nb3NjcmVlbmxvY2sudGhlbWUuYnVyc3QiXQ..

Paranoid Android ROM
I just finished compiling Paranoid Android for the Burst. I'm going to test it out when I get home and I'll let you know how it works.
Check out my guide, Compile Unofficial Paranoid Android for Pantech Burst

marcusmarcus said:
I just finished compiling Paranoid Android for the Burst. I'm going to test it out when I get home and I'll let you know how it works.
Check out my guide, Compile Unofficial Paranoid Android for Pantech Burst
Click to expand...
Click to collapse
Once CM gets fixed everything will be up ! There will be like rain of rims What I think But Cm project seems somewhat slow :/ . I downloaded 5.4gb somehow . 3.6gb left still for CM10 .

ujjwalchhabra said:
Once CM gets fixed everything will be up ! There will be like rain of rims What I think But Cm project seems somewhat slow :/ . I downloaded 5.4gb somehow . 3.6gb left still for CM10 .
Click to expand...
Click to collapse
Yeah. The nice thing about Paranoid is it is based on CM10, so once CM has everything fixed, PA will most likely have everything fixed. It takes a long time to download the repo. Glad I have 15Mbps Internet, though this makes me wish it was even faster.
If anyone wants to test out Paranoid Android on their Burst, I posted a link to the one I built at the bottom of the first post on Compile Unofficial Paranoid Android for Pantech Burst

marcusmarcus said:
Yeah. The nice thing about Paranoid is it is based on CM10, so once CM has everything fixed, PA will most likely have everything fixed. It takes a long time to download the repo. Glad I have 15Mbps Internet, though this makes me wish it was even faster.
If anyone wants to test out Paranoid Android on their Burst, I posted a link to the one I built at the bottom of the first post on Compile Unofficial Paranoid Android for Pantech Burst
Click to expand...
Click to collapse
saw your guide I'll have to try it out when I get home that way i'll have all 3 ready to go once cm is ready. marked your post as an announcement to keep it at the top

kagedws6 said:
saw your guide I'll have to try it out when I get home that way i'll have all 3 ready to go once cm is ready. marked your post as an announcement to keep it at the top
Click to expand...
Click to collapse
I have all 3 ready, too.

Isn't External SD support and USB mount fixed? - by Milf

Not sure about usb mount but I know ext sd does not. I couldnt even get it to mount through terminal. Anybody get external to mount at all?
Sent from my PantechP9070 using xda premium

See this :- Link

Here is the public release with the call audio/usb and sd mounting/att data fixes.
Please report back any issues and if possible have a logcat of you while the issue came up so we can better work towards trouble shooting the problems.

GPS doesn't work.
The CRT off animation works randomly with stock theme and doesn't work with other themes.
SystemUI FCs when theme is changed.
This is on the 7th march build.

adizz4 said:
This is on the 7th march build.
Click to expand...
Click to collapse
The first: thank you for posting here. You have been one of the few users, that understands the purpose of this thread.
In the repositories there are many pending changes. For this reason, there is no valid rom with date "March 7th", is smarter wait a few days to install the rom.
We do not wish to delay the changes, but these must be properly tested. When these changes can be considered validated, will be communicated to all users.
Thank you.

mifl said:
The first: thank you for posting here. You have been one of the few users, that understands the purpose of this thread.
In the repositories there are many pending changes. For this reason, there is no valid rom with dated March 7, is smarter, wait a few days to install the rom.
We do not wish to delay the changes, but these must be properly tested. When these changes are approved, will be communicated to all users.
Thank you.
Click to expand...
Click to collapse
:good::good::laugh: I'm really happy . And feel grateful that we have hardworking people like you, ninjah ,stevodo and all . I just started this work and now I felt how difficult it it indeed . Make changes compile than flash and all that stuff is pain in ...... . I'll give my best to again make custom rom of CM10 -AOKP - PA . Least I'm capable of now :silly:

Maybe we should start a thread for specifically for reporting bugs in co10 builds. That way it keeps the porting thread cleaner. Maybe in the orignial post for it, put an outline of how to report bugs, like build name/date, issue(s) reporting, logcat attachment /pastbin, etc.

marcusmarcus said:
Maybe we should start a thread for specifically for reporting bugs in co10 builds. That way it keeps the porting thread cleaner. Maybe in the orignial post for it, put an outline of how to report bugs, like build name/date, issue(s) reporting, logcat attachment /pastbin, etc.
Click to expand...
Click to collapse
There is no point. People do not want to understand the reasons that is requested write messages in one or another thread.
Every day that passes I am more convinced that writing in our threads is like preaching in the dessert.
For my part suggest that users who really want to contribute to this project visit http://www.devsnest.com.
P.D. Sorry to be so negative, but today people with their lack of education has put me grumpy.
Greetings.

[Rom][CLOSED] Huawei U8160 Four Axis JB UI

4OUR AXIS
Team Ascend Development
ABOUT
[4OUR AXIS] is an aftermarket android firmware based on android 2.3 Gingerbread, it is intended to increase functionality for your device, mainly features which aren't provided or available on stock firmwares.
DISCLAIMER
This provided aftermarket firmware is open, which means anyone can obtain this firmware and modify it as their wish and upload it to the community. [must provide credits of original developers, helpers and contributors.
By proceeding to install this aftermarket firmware you are voiding your devices warranty, once you have installed this firmware there is a small chance of your warranty being valid.
I do not take any responsibility if you soft-brick or potentially hard-brick your device, your complains and reports of being bricked will we ignored, unless I have added an exception and decide to help you out.
If you didn't bother reading this and decided to flash this rom and a boot problem or a functionality problem occurred do not even bother about telling me.
INSTALLATION PROCESS
[] Download preferred rom version. [Recommending Latest]
[] Download Google Apps. [GAPPS]
[] Transfer both .zip packages to your device.
[] Reboot into recovery.
[] Do a Nand backup. [Optional] but [Recommended]
[] Proceed by installing the Rom.zip followed by the Google Apps package.
[] Reboot device.
I do not take donations but in return it'd be nice if you hit the "Thanks Button".

DOWNLOADS
Rom : Beta/Initial Release
MD5 : 4a2407e33c521aebcd62e05261e719cb
Google Apps : Download
MD5 : 1647897d8ac3efb04723d2ad2c361a3f

CHANGE-LOG
[20130527] MD5 : 4a2407e33c521aebcd62e05261e719cb
[] Initial Release
[] Added miscellaneous hardwares [ modified ] from Wildfire and GMini
[] Have based on G360 [Latest]
FUTURE IMPROVEMENTS
If you have any suggestions or any issues please post it on this thread, I will be sure to accept or reject your suggestion.

Reserved for credits

screens ?

Hi Krishneelg3,
download link doesn't work. How about bugs ?

This is the Initial release.. I'll check the download link problem once I'm at school.
I do not own a u8160 so you guys will have to test it, I can only use my friends phone to test which will be next week.

TakisBeskos said:
screens ?
Click to expand...
Click to collapse
Its alike jelly bean.

Notice - reupload
Sorry i have to upload it again, some noob flagged it and i've received strikes, luckily i retrieved my account wit hall my files.
EDIT FIXED LINK

Can you add some screen shouts please.

Sure IN a moment
mrcham said:
Can you add some screen shouts please.
Click to expand...
Click to collapse
Also, I can't upload i dont know? some person flagged my public dist account and it has put me on a 4 month period strike so, ill be uploading to something else in a moment.

krishneelg3 said:
Also, I can't upload i dont know? some person flagged my public dist account and it has put me on a 4 month period strike so, ill be uploading to something else in a moment.
Click to expand...
Click to collapse
Oh I see,that's the thing !
you can add to dropbox in this period.

Hi,
I've installed the ROM. Looks nice but I can't enter CyanogenMod-Settings (settings stoped after unexpected failure). So I stopped testing.
Regards Odiad
(U8160)

odiad said:
Hi,
I've installed the ROM. Looks nice but I can't enter CyanogenMod-Settings (settings stoped after unexpected failure). So I stopped testing.
Regards Odiad
(U8160)
Click to expand...
Click to collapse
CyanogenMod settings close, okay so settings in general works but cm settings doesn't? If so, thanks. I think its something I accidentally misplaced within the cm settings as I modified it.

mrcham said:
Oh I see,that's the thing !
you can add to dropbox in this period.
Click to expand...
Click to collapse
Uploaded to dev host.

they seems cool I'm downloading the rom.

There seems to be an issue with CyanogenMod settings, please get an over clocking app from the store to over clock if needed.

Hi,
If somebody test this Rom for longer - battery life would be interesting
Regards Odiad

so what features does this rom have? what is the performance like? is it faster than slimmybean or psyke83 cm7? please clarify. also would it be be possible to attach some screenshots?
Sent from my U8160 using xda premium

any updates?
Sent from my U8160 using xda premium

[ROM]CyanogenMod 10.2 Discussion/Download [20/12]

If you haven't already seen/heard with have CM 10.2 thanks to KonstaT: http://www.modaco.com/topic/365330-devrom249-cyanogenmod-102-android-43/page-8
This thread is designed for XDA users to be able to see what's going on and discuss here, not all of us are MoDaCo users!
cm-10.2-20131220-KonstaKANG-blade.zip
Download the ROM here: http://d-h.st/doc
md5:11913723d5473145aa34176627337dc4
gapps-jb43-20130924-KonstaKANG.zip
Download GApps here: http://d-h.st/Ml3
md5:4e3d5a2b1ae256486b900498c657fd38
You need a 180mb /system for this, you can take stuff out before you flash to reduce it, if you know what you're doing!
Depreciated unofficial build is available here: http://www.mediafire.com/?i5gw64737cf7tas
This is still all KonstaTs work, I've just synced with the latest sources so it is slightly more up to date.
Working:
Code:
Wifi
RIL (mobile network & data)
GPS
Bluetooth (& bt-tethering)
Audio (playback/input/routing/headphones/etc)
Camera (photos, camcorder & panorama)
Hardware acceleration and OpenGL rendering
Hardware video decoding & encoding
SD card
USB-storage & adb
USB-tethering
Wifi-tethering
Touchscreen/multi-touch
Sensors
LEDs
FM radio
Everything seems to work fine!
CHANGELOG
20.12. changelog:
CM 10.2.0 final
WhisperPush (merged)
11.10. changelog:
android 4.3.1
24.9. changelog:
fixed data indicator arrows in wifi/signal icons
added vibrator intensity tuning (Settings -> Device - More... -> Vibrator intensity)
updated google apps package to fix initial device setup
22.9. changelog:
initial release

07/10, new build up, just synced latest sources, all up to date.
credits to konstat for the original
http://www.mediafire.com/download/kovy3dcp7pwjrhl/cm-10.2-20131007-UNOFFICIAL-blade.zip
MD5: B26D3A0C43DF2D23922A4C966CB7BC9D

matt4321 said:
07/10, new build up, just synced latest sources, all up to date.
credits to konstat for the original
http://www.mediafire.com/download/kovy3dcp7pwjrhl/cm-10.2-20131007-UNOFFICIAL-blade.zip
MD5: B26D3A0C43DF2D23922A4C966CB7BC9D
Click to expand...
Click to collapse
Hi
Great to see Blade advancing. Just downloaded your update and installed. I came fro CM 9
Keep up the good work.
Stransky
Sent from my iPhone using Tapatalk

Hi,
Tried this,But unfortunately didn't do it for me ! Many issues,
First and foremost the phone becomes incredibly slow,Second the FC of phone "Process.android.phone",The whether doesn't work.
So overall a bummer for me ! had to revert to CM7.2,If these things are worked out would love to have this.
Regards

handsome1_blr said:
Hi,
Tried this,But unfortunately didn't do it for me ! Many issues,
First and foremost the phone becomes incredibly slow,Second the FC of phone "Process.android.phone",The whether doesn't work.
So overall a bummer for me ! had to revert to CM7.2,If these things are worked out would love to have this.
Regards
Click to expand...
Click to collapse
Are you gen2? Big enough /system, you need a 180mb or you will have issues. It's all fine on my device. Did you wipe data? You must wipe data if you're coming from CM7.2, also make sure you have an up to date recovery
Sent from my LT30p using Tapatalk 4

Hi,
Are you gen2? Big enough /system, you need a 180mb or you will have issues. It's all fine on my device. Did you wipe data? You must wipe data if you're coming from CM7.2, also make sure you have an up to date recovery
Click to expand...
Click to collapse
Yeah I had converted my gen1 to gen 2 using gen1-gen2 tpt,Its now with 215Mb System,203mb Data,37Mb Cache !! I had completely wiped all data including dalvik,So that's not it !
It also gives FC on Trubecht or something ! Am not sure whats the issue but things not working that's the bottom line..
Regards.

handsome1_blr said:
Hi,
Yeah I had converted my gen1 to gen 2 using gen1-gen2 tpt,Its now with 215Mb System,203mb Data,37Mb Cache !! I had completely wiped all data including dalvik,So that's not it !
It also gives FC on Trubecht or something ! Am not sure whats the issue but things not working that's the bottom line..
Regards.
Click to expand...
Click to collapse
Did you flash KonsaKANG or the unofficial one I built?
Sent from my LT30p using Tapatalk 4

Hi,
Did you flash KonsaKANG or the unofficial one I built?
Click to expand...
Click to collapse
The one you built ! i,e the one in the second link.
Regards.

handsome1_blr said:
Hi,
The one you built ! i,e the one in the second link.
Regards.
Click to expand...
Click to collapse
I don't know sorry, works fine for me and noone seems to have complained over on Modaco, seems like it's just you. Not sure whats causing it
Sent from my LT30p using Tapatalk 4

Hi,
I don't know sorry, works fine for me and noone seems to have complained over on Modaco, seems like it's just you. Not sure whats causing it
Click to expand...
Click to collapse
Well thanks for the replies,will check for some more time as its not my primary phone !! May be it'll settle down after a day or two.
Btw any updates coming up ???
Regards.

handsome1_blr said:
Hi,
Well thanks for the replies,will check for some more time as its not my primary phone !! May be it'll settle down after a day or two.
Btw any updates coming up ???
Regards.
Click to expand...
Click to collapse
I'll sync and compile another build within the coming days, watch out for the 'official' builds on modaco
Sent from my LT30p using Tapatalk 4

Hi,
I'll sync and compile another build within the coming days, watch out for the 'official' builds on modaco
Click to expand...
Click to collapse
Thanks again for the same,Yes I Am on a constant watch there as well ! Am a member there too.
Regards.

handsome1_blr said:
Hi,
Thanks again for the same,Yes I Am on a constant watch there as well ! Am a member there too.
Regards.
Click to expand...
Click to collapse
out of interest what happens when you flash konstats' builds? are they the same/worse/better?

Hi,
out of interest what happens when you flash konstats' builds? are they the same/worse/better?
Click to expand...
Click to collapse
Didn't try at all,I straight away tried yours as it was more recent (with some more work done to better it by you I presume),If you say I will try that and report back.
Regards.

handsome1_blr said:
Hi,
Didn't try at all,I straight away tried yours as it was more recent (with some more work done to better it by you I presume),If you say I will try that and report back.
Regards.
Click to expand...
Click to collapse
Try it and see, I'd be interested to see the result. I'm only keeping it more up to date by syncing with the latest CyanogenMod source code
Sent from my LT30p using Tapatalk 4

Hi,
Try it and see, I'd be interested to see the result. I'm only keeping it more up to date by syncing with the latest CyanogenMod source code
Click to expand...
Click to collapse
Well tried it multiple times but fails to install,gives installation aborted message "Sdcard:Setparam error,(Status7)".
So had to reinstall yours,But before that I did some stuff which helped a bit !
I formatted the SD card to start a fresh,with nothing on the card I copied the repartition image folder and did the repartition again just to make sure its not the issue with partition or size !
Next tried the Kangs ROM and failed as mentioned above,Next tried yours and was able to successfully install the ROM,installed Gapps from Kangs (after reboot from the first boot)
Long story short,it now performs much faster and better then earlier,Don't know what was the issue earlier but its sort of sorted for now (although some lag persists,but guess have to live with it).
Thanks once again for the replies. Any guesses as to why the original one failed and not yours ??
Also can we expect FM to be operational in your next build ??
Regards.

handsome1_blr said:
Hi,
Well tried it multiple times but fails to install,gives installation aborted message "Sdcard:Setparam error,(Status7)".
So had to reinstall yours,But before that I did some stuff which helped a bit !
I formatted the SD card to start a fresh,with nothing on the card I copied the repartition image folder and did the repartition again just to make sure its not the issue with partition or size !
Next tried the Kangs ROM and failed as mentioned above,Next tried yours and was able to successfully install the ROM,installed Gapps from Kangs (after reboot from the first boot)
Long story short,it now performs much faster and better then earlier,Don't know what was the issue earlier but its sort of sorted for now (although some lag persists,but guess have to live with it).
Thanks once again for the replies. Any guesses as to why the original one failed and not yours ??
Also can we expect FM to be operational in your next build ??
Regards.
Click to expand...
Click to collapse
Weird, no idea what caused all those issues, but if it's now working then awesome! I can't get FM to compile with my builds for some reason, I may be missing some patches so I'll try again tomorrow. You can just take the FM apk out of KonstaKANG zip and install it to your system, that should work. But I'll compile and upload another build tomorrow regardless of FM compiling or not. I'll add FM to my /system from KonstaKANG tomorrow and double check it works, which it should (may need some other files), if it does then I'll just copy paste the FM apk across.

02/11 build here! Fresh synced sources
http://www.mediafire.com/?i5gw64737cf7tas
a90247eb59bc1e9d2ad0e3de0bb26b15

Hi,
Thanks buddy for the same !! flashed it and trying to see if this one does the job !!
If I can request you,I would like to request you kindly see and port this OS !
Shendu OS
I tried it and its very good and seems like a good option !
Regards.

[ROM][11/19/13][Flo] - {Latest OTA} - Stock Rooted 4.4 - KRT16S - First KitKat Update

Stock OTA Update 11/19/2013
Features
Pre-Rooted with SuperSU 1.69
Busybox
init.d support
No Other mods!
Odex (Preferred) or De-Odex!
Please Hit Thanks and Rate the thread 5 Stars!
MOD EDIT: Link removed as domain has expired. Thread closed until new links can be installed
Enjoy!
[/CENTER]

Sharing Policy
The spirit of Open Source is to share your knowledge and files with the rest of the world so they can improve on what you do when possible. This is also my philosophy and I would never compromise that!
You are free to use this ROM or any part of this ROM any way you like as long as you give proper credits!
Do not use my work if you cannot give proper credits!
Consider this your permission! Please do not PM me asking if its OK to build off this ROM. Permission granted!
However this does not include my CleanROM series of ROMS. Please do not use those without contacting me first!
This ROM is not a CleanROM. Its a stock rooted and all yours!
If you are going to use this as a base ROM for your own creation then you can at least hit Thanks in the OP. Lots of developers use my work and never once thank my OP. Don't be that guy!
Good Info / Thread Rules
The original KitKat Bootloader files can be found here (these are from the first OTA to KitKat): http://forum.xda-developers.com/showpost.php?p=47411018&postcount=3
Please dont ask if you can dirty flash. You can do what you want. Make a nandroid BEFORE you flash, if it doesnt work out then just restore your nandroid and re-plot your method of flashing.
Please dont post anything other than this ROM specific related questions. This is not a general topic thread about KitKat. Its here to help users install the ROM and ask questions about ROM usage. Its not here to ask questions about other ROM's, getting OTA's or what you think Recovery is capable of. Go to General with that stuff.
Please do NOT post mirrors of my work! I understand you want to help but the only person authorized to mirror my work is me.
Thanks to the following people that make what I do possible
DSI-XDA (Kitchen tools)
Chainfire (Root)
JesusFreke (smali tools for de-odexing)
Everyone who donates, says positive things and over encourages me to make ROMZ!
My Wife (for not feaking out when I go a day without sleep so I can make ROMZ, unlike most wifes, she gets it!)

Please Rate the thread 5 Stars before the Nexus Trolls get here!
There is a group of disturbed people that rate every thread 1 star in this forum.
Please rate it 5 stars before there lame attempts to piss on every one fail!
Woooooot!

shivasrage said:
First thanks scrosler for the deodexed ROM....very Quick...:good:
Also I have a little question...
do you cook your ROM´s with the kitchen..??
if so are you interested to share the edify_defs files
for the flo and eventually for the grouper...?
greets
Click to expand...
Click to collapse
I dont use Edify defs. I hand write my updater scripts. Nothing to share.
jordirpz said:
Thanks for all, but ART works in odex or deodex 11/19/13 rom?, because in the other doesnt work for me, i had bootlop.
Enviado desde mi GT-I8160 mediante Tapatalk
Click to expand...
Click to collapse
Only Odex. De-Odex is old... Art is new!

Mayday_XL said:
Sorry, i mean odex.
Click to expand...
Click to collapse
Because odex is better, more efficient so you get a smoother feel.
De-Dodex is not as smooth as odex. Some devices you can see this better in. This device is pretty close. But if you want the best then you go Odex.

mine say KRT16O i used the updater from your kitkat rom

duryard said:
Can we do dirty flash if coming from your KRT16O?
Click to expand...
Click to collapse
blameitonchemo said:
Just looking to clarify. Coming from PA 4.3, I simply flash this without a full wipe? Or do I need to plan to lose everything (apps/settings/files)?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
If your coming from another stock based ROM a wipe would not be needed.
If your coming from something like PA or CM then I would wipe because I dont know s**t about those ROMS
KiaraTheDragon said:
mine say KRT16O i used the updater from your kitkat rom
Click to expand...
Click to collapse
The ROM does or the Updater script?

I think I found a bug in Googles code...
If you look real closely at that WiFi Icon in the status bar, the arrows dont show up when data is going in and out.
Is it just my old eyes or can anyone confirm?

ldmeeds said:
I just went to use my tablet and the update was on my screen. I didn't think we could get OTA's if you had a custom recovery installed. It just showed up all by itself
Click to expand...
Click to collapse
Not true and not related to this specific ROM.
Please take that question to General or Q/A.
wdarea51 said:
So can we dirty flash from KRT16O? I literally just flashed and re did ALL of my apps and settings yesterday, and I would hate to have to wipe again and redo all apps and settings again one day later, its literally a few hour process. Thanks!
Click to expand...
Click to collapse
I just stated 5 posts ago if you coming from a stock base it would more than likely be fine.
You guys know how to make Nandroids, right? Back ups?
Its always best to do that, test what you want, if it doesnt work out, then restore your nandroid and you have lost nothing.

scrosler said:
I think I found a bug in Googles code...
If you look real closely at that WiFi Icon in the status bar, the arrows dont show up when data is going in and out.
Is it just my old eyes or can anyone confirm?
Click to expand...
Click to collapse
It seems to me that KRT16O has this bug already.

jwong.hhf said:
It seems to me that KRT16O has this bug already.
Click to expand...
Click to collapse
It's not a bug. It's a feature
You can see way these changes were made here A Google Engineer Explains Why KitKat Has White Status Bar Icons And Only Shows Connectivity In Quick Settings

FYI: Moved files to Android File Host

scrosler said:
I think I found a bug in Googles code...
If you look real closely at that WiFi Icon in the status bar, the arrows dont show up when data is going in and out.
Is it just my old eyes or can anyone confirm?
Click to expand...
Click to collapse
I don't think that is a bug. It was mentioned as a "feature", along with the GPS not blinking anymore when searching.
The arrows got moved into the drag down status bar.
They seem to not really want you to know what is going on and whether you are online, when data is being sent/received, whether GPS is running, etc.

Edited

Thread Cleaning
Ok folks, the OP requested a thread cleaning.
So here's how it goes....
1) Thanks - Deleted as you have a "Thanks" button. Use it please. No reason creating a new post.
2) Slow downloads - This can happen anywhere. Try at a different time. No reason creating a new post.
3) Dirty Flash - Com'on folks, you take your chances when you dirty flash. For best results, always wipe.
Now, the above posts have been cleaned. I HAVE however, left some of the OP's replies so a touch of info has been saved.
Please, look at the info above, and in the OP BEFORE you post. The Rom is Stock, so there really shouldn't be a whole lot of questions, and most of those belong in the Q & A Forum.
Cheers
MD

What if I coming from KRT16O ?
Sent from my Nexus 7 using XDA Premium HD app

Ok so I have actually found something I'm still a noob at! I updated to KRT16S with a dirty flash from Scrosler's KRT16O, and it's still showing I have an update avaliable in my status bar..How can I get rid of this notification?

mds96 said:
Ok so I have actually found something I'm still a noob at! I updated to KRT16S with a dirty flash from Scrosler's KRT16O, and it's still showing I have an update avaliable in my status bar..How can I get rid of this notification?
Click to expand...
Click to collapse
Force stop Google services framework... After that I would reboot the tab or some things could run funny like the time will stop
Sent from my HTC One using XDA Premium 4 mobile app

I didn't get transparent navbar & new google launcher after flashing this..

manujis said:
I didn't get transparent navbar & new google launcher after flashing this..
Click to expand...
Click to collapse
This is for the Nexus 5 only, at least for now.
http://www.youtube.com/watch?v=THnJ8exsxCM

[ROM] Color OS 2.0 for Desire S 4.2.2

Color OS 2.0 for Desrie S​
hey guys, this rom is from china, color os 2.0 .
thanks for flinny's cm10.1 rom
i used his bulid 22 to patch this rom.
github : https://github.com/coloros
Click to expand...
Click to collapse
download :
color-update-g12-by-nic_signed.zip
https://mega.co.nz/#!8NJxlZba!57d9z3hydhNwIo7iPMnZ8tcPnrwTNElOpl3JZnlpRyU
Click to expand...
Click to collapse
I will use google translation... im sorry - -!
- System due to lack of space in the data program made ​​of soft chain (this will not affect any use), please do not wipe after intertall, otherwise it will cause the system to process incomplete
- Based on color os latest patch source adapter
- use flinny's ROM cm10.1 bulid 22 to make this rom
- everything is work
- root
- S2W, Double-click to Wake, double-click home to lock
- cpu overclocking
- add atx settings
- fix some bug
- fix 480p image resources
Click to expand...
Click to collapse

Wow, new rom I will test it when i have more free time, i hope will work good :fingers-crossed:
Keep good work!

Ry09iu said:
Color OS 2.0 for Desrie S​
hey guys, this rom is from china, color os 2.0 .
I will use google translation... im sorry - -!
Click to expand...
Click to collapse
I would like to try this ROM but the download link goes to the MEGA home page, instead of the Zip file. Can you please fix this?

phayz said:
I would like to try this ROM but the download link goes to the MEGA home page, instead of the Zip file. Can you please fix this?
Click to expand...
Click to collapse
oh, im sorry . i fixed it already .thank u to tell me

edi194 said:
Wow, new rom I will test it when i have more free time, i hope will work good :fingers-crossed:
Keep good work!
Click to expand...
Click to collapse
I fixed the link already .
and this rom has been make 2weeks ago, and it good for work , some people said only a little bug, but doesnt affect to use

Still I am not able to access the link when I am clicking goes mega site only
Sent from my HTC Desire S using Tapatalk 2

dmabid said:
Still I am not able to access the link when I am clicking goes mega site only
Sent from my HTC Desire S using Tapatalk 2
Click to expand...
Click to collapse
You need to wait till the download on the site completes, then you get an option to save it.
The link has no problem.

Ry09iu said:
I fixed the link already .
and this rom has been make 2weeks ago, and it good for work , some people said only a little bug, but doesnt affect to use
Click to expand...
Click to collapse
What bug?
Inviato dal mio Desire S

TL;DR - If you want a ROM with a different look to CM and still want a "classic-style" launcher and a good set of built-in apps, this is a great ROM.
Longer story...
I flashed this ROM to my phone this morning and so far I have been very impressed. I don't like the stock Android "Halo" look, so this ROM's appearance is a nice change. I first made a mistake in flashing the wrong GApps package but all was good after I flashed one for the correct Android version - gapps-jb-20130301-signed.zip.
In terms of features, it has all that I usually want from Cyanogenmod, plus a few extra features:
Two styles of lockscreen, including lockscreen notifications
Online themes "store"
Online wallpapers "store"
Gestures support, including my favourite - adjusting volume by moving two fingers up or down the screen
Swipe to wake support
Power management app
Data usage monitor app
Launcher is fully-featured, including folders support (both on the home screen and in the apps drawer), uninstalling from the app drawer, a variety of smooth transitions
For built-in apps it has almost everything I want:
music player
notes-taking app
clock (including stopwatch, world clock, timer)
calculator
torch
sound recorded
compass
It has an app named "Backup Restore" in the 'Tools' folder but it FC'd when I tried to launch it. It also features an app named "Cloud service" which supposedly backs up your contacts, SMS etc but I haven't yet tried that.
In using it for only about an hour I have not seen any FCs, except for "Backup restore". I don't like the notification area because it has the shortcuts together with notification messages and no apparent way of changing that. It's a minor point, and perhaps I could find a way through searching Oppo forums.
Hint: If you are looking for some of the native settings you would expect on Cyanogenmod, go into the 'ATX Settings" app and select "Stock Settings". I don't know what "ATX" stands for in this case.
Question - Does anyone know what "MiPop" is? I have doen some searching but can't find an answer.

The first screen shown is in Chinese.. Anyone knows what buttons had to be pressed in order to submit a new registration?
Inviato dal mio Desire S

Angel2k6 said:
The first screen shown is in Chinese.. Anyone knows what buttons had to be pressed in order to submit a new registration?
Inviato dal mio Desire S
Click to expand...
Click to collapse
Assuming you have flashed the ROM, then a GApps package, I believe you see two options, each with an icon. One features an icon that looks like a cog, while the other looks like a black box with some sliders. If I understand correctly, the cog icon is for the native ColorOS setup, which you do *NOT* want to use as it is in Chinese. For a standard CM setup, select the icon which looks like a black box with sliders.

Angel2k6 said:
The first screen shown is in Chinese.. Anyone knows what buttons had to be pressed in order to submit a new registration?
Inviato dal mio Desire S
Click to expand...
Click to collapse
can help u out if u post a screenshot
Sent from my Nexus 5 using XDA Premium 4 mobile app

I have just two questions...
Is anyone else using this ROM?
From what ROM is this ported and can we see that ROM's home page?

Android version - gapps-jb-20130301-signed.zip.
Click to expand...
Click to collapse
Where did you find this gapps at? Could you provide me the link?
Thanks. I would love to try out this rom as soon as I download it and find the right gapps.

Cpt_Chaos said:
Where did you find this gapps at? Could you provide me the link?
Thanks. I would love to try out this rom as soon as I download it and find the right gapps.
Click to expand...
Click to collapse
I honestly can't recall just where I download this GApps package. I think what's important here is to be sure you are using a compatible GApps package, which is where I went wrong previously.
I have done some "hacking" of this ROM, removing unwanted APKs and installing an alternate keyboard etc. Not "hacking" in the true sense. I have done this to try and reduce the size of the ROM as it is much larger than CM ROMs. I have not yet found just the right files to remove. In my current installation, everything except gestures works, so I have obviously removed something that should not have been removed.
Please do go ahead and try it out. I would love to hear what you think. Until now I thought I was on my own with this ROM. :laugh:

Cpt_Chaos said:
Where did you find this gapps at? Could you provide me the link?
Thanks. I would love to try out this rom as soon as I download it and find the right gapps.
Click to expand...
Click to collapse
Try these
http://wiki.cyanogenmod.org/w/Google_Apps

I never could get the rom into English without blindly flipping through all settings until I found it.
On top of it, then not all settings were in English, some were still in Chinese.
It looks like a promising rom but until it is completely in English or German for that matter, I wont be trying it. It was too frustrating to work with some Chinese screens.

download link is dead or not working
,help

monu09 said:
download link is dead or not working
,help
Click to expand...
Click to collapse
I tested it about 1 minute ago and it works for me. Is it possible that access to the download site - MEGA - is restricted in your country?

LINK?
Download link isnt working. Can you update it please. Thanks a lot.