Related
hi
i have lg g2x in my iraq qountry ..i can use any sim card in my phone
i want to update baseband of phone
th Q ??
if if update baseband the phone will lock ?? and dont work only in t-mobile sim card ????
that is the quastion and thak u
igi2000 said:
hi
i have lg g2x in my iraq qountry ..i can use any sim card in my phone
i want to update baseband of phone
th Q ??
if if update baseband the phone will lock ?? and dont work only in t-mobile sim card ????
that is the quastion and thak u
Click to expand...
Click to collapse
Once you unlock a phone I don't think you can relock it once again, so no I don't think the phone will re-lock again. Someone correct me if I'm wrong though
Hope this helped!
Sent from my LG-P999 using xda app-developers app
russell956956 said:
Once you unlock a phone I don't think you can relock it once again, so no I don't think the phone will re-lock again. Someone correct me if I'm wrong though
Hope this helped!
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
The phone can be relocked by carrier OTA, but the chances of this being done are zero.
Also to OP. How are you planning on updating your baseband? It cannot be updated except by LG Updater where you flash an entire rom or the KDZ tool, which also requires you to flash an entire rom. Flashing the baseband only is not possible at this time on the P999 version of this phone. Don't use the P990 tool to flash a baseband as the chip is different and you will render your phone a tablet with no radio.
igi2000 said:
hi
i have lg g2x in my iraq qountry ..i can use any sim card in my phone
i want to update baseband of phone
th Q ??
if if update baseband the phone will lock ?? and dont work only in t-mobile sim card ????
that is the quastion and thak u
Click to expand...
Click to collapse
None of the G2X/P999 phone updates will relock it.
The G2X/P999 baseband cannot be changed by itself, it can only be changed by applying the full update which includes the kernel, operating system, baseband, and RIL that is contained in the KDZ file provided by LG or T-Mobile or other cell-phone service provider/carrier and installed through using the official LG Updater or over-the-air (OTA) by T-Mobile, etc. There are posts in the G2X forum with instructions about how to update the G2X/P999, do not use any updater and/or KDZ file for the Optimus 2X/P990. Here's my instructions:
http://forum.xda-developers.com/showthread.php?p=24902907
thank you very much my frends
i want to update baseband because i want this room MokeeOS R.282
http://forum.xda-developers.com/showthread.php?t=1700215
when i inestell that room in my phone that work fine but with out radio ot call
that need new baseband
New baseband = March 11 2012
and i cant post reply because i new member in this forums
how can i update the baseband to use this room ???
thank you again
igi2000 said:
thank you very much my frends
i want to update baseband because i want this room MokeeOS R.282
http://forum.xda-developers.com/showthread.php?t=1700215
when i inestell that room in my phone that work fine but with out radio ot call
that need new baseband
New baseband = March 11 2012
and i cant post reply because i new member in this forums
how can i update the baseband to use this room ???
thank you again
Click to expand...
Click to collapse
You actually don't have to update the baseband just for that rom there's a zip similar to owains that makes new roms work on the old baseband.... Get it here http://forum.xda-developers.com/showthread.php?t=1714536
Sent from my LG-G2x using Tapatalk 2
thank you DJLamontagneIII
i try to instell th room and then this file and the radio (call) is work fine..thank you very much
igi2000 said:
thank you DJLamontagneIII
i try to instell th room and then this file and the radio (call) is work fine..thank you very much
Click to expand...
Click to collapse
No problem man hit that thanks button if you have any to spare I'd appreciate it :beer:
Sent from my LG-G2x using Tapatalk 2
Hello all
I was wondering if there is someone that has suceeded in flashing a v21e firmware without getting signal problems here in Brazil.
I am able to flash v21e KDZ and the respective baseband, but I never get signal what is kinda disappointing.
My question is, here in Brazil or other countries with the same baseband we will be stuck on v20a firmwares and v21d? Is there a way to flash v21e firmware without having problems with signal or, in other words, have the phone functionability working?
If someone knows how, please tell me. Thanks
another thing i was wondering if there is a problem with models and v21e
As you know here in Brazil the Optimus 3D model is P920H which is not kind the same as P920 (whole Europe I guess) or P925 (US).
Is because of that i'm facing those problems (no signal) trying to upgrade software version to v21e?
perna84 said:
another thing i was wondering if there is a problem with models and v21e
As you know here in Brazil the Optimus 3D model is P920H which is not kind the same as P920 (whole Europe I guess) or P925 (US).
Is because of that i'm facing those problems (no signal) trying to upgrade software version to v21e?
Click to expand...
Click to collapse
im from venezuela n i flashed v21e... everything seemed to be working right but i noticed that i had signal loss and ghost calls so i went back to v21d and im using cm7 now... still got signal loss but i cant find a better rom atm...
btw i own a p925 latest cm7 nightly
I live in São Paulo and flashed V21E kdz. It always worked on all networks of my TIM subscription (phone, 2G, 3G, SMS). Haven't tried video call yet. Also, wi-fi and bluetooth works well. Soon after this I installed Promethius ROM and kernel and have been using them. This week I travalled to outher cities and noticed that the phone never realized it was on roaming. It kept data connection available even with the option to allow data connection on roaming disabled.
perna84 said:
Hello all
I was wondering if there is someone that has suceeded in flashing a v21e firmware without getting signal problems here in Brazil.
I am able to flash v21e KDZ and the respective baseband, but I never get signal what is kinda disappointing.
My question is, here in Brazil or other countries with the same baseband we will be stuck on v20a firmwares and v21d? Is there a way to flash v21e firmware without having problems with signal or, in other words, have the phone functionability working?
If someone knows how, please tell me. Thanks
Click to expand...
Click to collapse
I know the best baseband is 21P for all Latin America man many guys using it
Sent from my LG-P920 using xda premium
oyanezg said:
I know the best baseband is 21P for all Latin America man many guys using it
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
Hmm, guess i'l try this one
But if I flash 21p baseband i won't be able to use v21e roms because of baseband mismatch, am I correct?
Dunno what to do
cassianog said:
I live in São Paulo and flashed V21E kdz. It always worked on all networks of my TIM subscription (phone, 2G, 3G, SMS). Haven't tried video call yet. Also, wi-fi and bluetooth works well. Soon after this I installed Promethius ROM and kernel and have been using them. This week I travalled to outher cities and noticed that the phone never realized it was on roaming. It kept data connection available even with the option to allow data connection on roaming disabled.
Click to expand...
Click to collapse
I live in Porto Alegre and had no luck flashing v21e kdz as I said. My carrier is VIVO. I've seen on another post (can't remember wich one to be honest) that someone said that here in Brazil v21e wasn't supposed to get signal at all, but this guy was using it.
As far as I know that could be an kernel issue also, sometimes flashing different kernels could restore signal but i hadn't that luck. I've been using smartflash method to flash v21e baseband (with bin convertor and stuff) because I tought it was a simplier and most effective way to do it (without getting any errors or having to solder a cable properly). Tonight I'll try using Lg Flash Tool like most of ppl to see what happens.
Just wanted to use Acura 3D MAX rom or Prometheus Project... But since i'm stucked with 21d (which i'm using atm) or 20a (original), i'm running ThiaZO3D 2.7 which is awesome but not kind what I was looking for.
Have u tried to flash another versions?
I´m using LGP920-v21e-apr-19-2012 with DNA_GB 3.3.3 with no problems... look into the kdz flash log... post it here... post the About Phone to!
perna84 said:
Hmm, guess i'l try this one
But if I flash 21p baseband i won't be able to use v21e roms because of baseband mismatch, am I correct?
Dunno what to do
Click to expand...
Click to collapse
No. Actually all E baseband roms works with P baseband with no problem the E baseband is the E for Central, South America
Sent from my LG-P920 using xda premium
My LG-P920H Brasil
perna84 said:
Hello all
I was wondering if there is someone that has suceeded in flashing a v21e firmware without getting signal problems here in Brazil.
I am able to flash v21e KDZ and the respective baseband, but I never get signal what is kinda disappointing.
My question is, here in Brazil or other countries with the same baseband we will be stuck on v20a firmwares and v21d? Is there a way to flash v21e firmware without having problems with signal or, in other words, have the phone functionability working?
If someone knows how, please tell me. Thanks
Click to expand...
Click to collapse
I have a LG-P920H - Optimus 3D.
I had installed a V21e (German) without problem.
None problem with 3G and GSM.
Hmm guys look what I found out.
I`ve tried to install Acura 3D MAX 3 ROM, and guess what? No signal again...
So I was almost giving it up because my baseband was on v21e so I didn`t know what to do.
Then I`ve tried to change the kernel.
I installed bluekernel and it worked just fine...
Why did this happen? Ideas?
Thanks
perna84 said:
Hmm guys look what I found out.
I`ve tried to install Acura 3D MAX 3 ROM, and guess what? No signal again...
So I was almost giving it up because my baseband was on v21e so I didn`t know what to do.
Then I`ve tried to change the kernel.
I installed bluekernel and it worked just fine...
Why did this happen? Ideas?
Thanks
Click to expand...
Click to collapse
download google getril of play to check bade band
ENVIADO DESDE MI ACURAFONO
perna84 said:
I live in Porto Alegre and had no luck flashing v21e kdz as I said. My carrier is VIVO. I've seen on another post (can't remember wich one to be honest) that someone said that here in Brazil v21e wasn't supposed to get signal at all, but this guy was using it.
As far as I know that could be an kernel issue also, sometimes flashing different kernels could restore signal but i hadn't that luck. I've been using smartflash method to flash v21e baseband (with bin convertor and stuff) because I tought it was a simplier and most effective way to do it (without getting any errors or having to solder a cable properly). Tonight I'll try using Lg Flash Tool like most of ppl to see what happens.
Just wanted to use Acura 3D MAX rom or Prometheus Project... But since i'm stucked with 21d (which i'm using atm) or 20a (original), i'm running ThiaZO3D 2.7 which is awesome but not kind what I was looking for.
Click to expand...
Click to collapse
Hello perna84,
I remember that post, that's why I took more than a month to try v21e. But I soon noticed that in my case it was not true. I flashed the whole kdz using that "marwin" LG application, using the small html server to trick the LG application tool to not update itself. Couldn't find the thread again, but if you need I can try a little harder later. I always used the original usb cable, not a modified one. Never encountered any error message. The original v21e ROM worked fine for the couple of minutes I left it until I flashed custom ROMs.
I tried Promethius ROM and kernel in several versions, but I noticed it to be quite unstable: occasional boots, wi-fi and bluetooth freezes and so on.
Then I tried Acura ROM. Almost perfect but google+ application doesn't work. Other users report other apps not working also.
Now I'm using ThiaiZ v2.8 and, do far, it seems perfect. No misbehaving until now.
Sent from my LG-P920 using Forum Runner
cassianog said:
Hello perna84,
I remember that post, that's why I took more than a month to try v21e. But I soon noticed that in my case it was not true. I flashed the whole kdz using that "marwin" LG application, using the small html server to trick the LG application tool to not update itself. Couldn't find the thread again, but if you need I can try a little harder later. I always used the original usb cable, not a modified one. Never encountered any error message. The original v21e ROM worked fine for the couple of minutes I left it until I flashed custom ROMs.
I tried Promethius ROM and kernel in several versions, but I noticed it to be quite unstable: occasional boots, wi-fi and bluetooth freezes and so on.
Then I tried Acura ROM. Almost perfect but google+ application doesn't work. Other users report other apps not working also.
Now I'm using ThiaiZ v2.8 and, do far, it seems perfect. No misbehaving until now.
Sent from my LG-P920 using Forum Runner
Click to expand...
Click to collapse
Whast up man?
I was looking for the post that has Marwin method and I can't find it, could you please help me out? Thanks in advance!
Nevermind, just found it... http://forum.xda-developers.com/showthread.php?t=1186460
I'll try that later since smartflash isn't updating the baseband (although it already has recovered my phone from a brick)
Baseband for Samsung Galaxy s Gt-I9003L TIM BRASIL!
cassianog said:
I live in São Paulo and flashed V21E kdz. It always worked on all networks of my TIM subscription (phone, 2G, 3G, SMS). Haven't tried video call yet. Also, wi-fi and bluetooth works well. Soon after this I installed Promethius ROM and kernel and have been using them. This week I travalled to outher cities and noticed that the phone never realized it was on roaming. It kept data connection available even with the option to allow data connection on roaming disabled.
Click to expand...
Click to collapse
Hi Cassiano.
I´m from Brazil too.
Sorry to post it in this LG departament...
I have Samsung GT-I9003L ( Original version with 2.2.1 Froyo Movistar Argentina )
After Flashed to DDLF2, my phone, is working with 2.3.6 GB. And now show me GT-I9003 without "L" in the end.
But!!!!!
i swear, than i change the android version unless 3 times, to trying to fix my signal problem. but no sucess.
My signal Problem still the same.
Building areas doesn´t work! open areas, works... but not so good!
I´m looking for a good BaseBand to use my phone in Brasil with TIM Operator.
Anybody can help me! if somebody have TIM mobile, i can call... i don´t wanna use my phone for paperweight.
till now, the phone work good! Only Signal is missing. i cant use the phone inside my office, cause the phone can´t get signal...
Anybody help me!
Sorry about my english!
I recently purchased a Nexus S (M200) and I am experiencing very low Wifi and GSM signals. In fact, it's so low that I can't even make calls from GSM when indoors and need to get outdoor to get fair signals. Similar issue is with Wifi and I have to be within 10 meters to get a stable Wifi connection.
I have tried various roms and kernels but the problem remains. Even went back to stock gingerbread rom and the same problem. Any suggestion to get this fixed? Seems like a hardware issue and my phone is not under warranty!
Help appreciated.
I experienced the same thing on Cyanogen 10.1 nightly but when I was on stock 4.1 it was ok.
Maybe it's your provider which don't have a good network where you are.
I am sorry for my english I hope you will undrstand me.
Sent from my XOOM 2 ME using xda app-developers app
Otalgia said:
I experienced the same thing on Cyanogen 10.1 nightly but when I was on stock 4.1 it was ok.
Maybe it's your provider which don't have a good network where you are.
I am sorry for my english I hope you will undrstand me.
Sent from my XOOM 2 ME using xda app-developers app
Click to expand...
Click to collapse
I am using the same SIM on a different phone and get perfect signals. I guess it's must be a hardware issue...
Try to flash Radio..
_hito_ said:
Try to flash Radio..
Click to expand...
Click to collapse
I can try that. Any suggestion for a reliable radio to use?
You should get the most recent baseband (radio) firmware update for your model of Nexus S. If you search the forums, you should be able to find a thread all the basebands linked. Be sure to only install the one for the model you have, because the wrong one will not work.
impossibilium said:
You should get the most recent baseband (radio) firmware update for your model of Nexus S. If you search the forums, you should be able to find a thread all the basebands linked. Be sure to only install the one for the model you have, because the wrong one will not work.
Click to expand...
Click to collapse
Flashed the latest and tested a few others but the same problem
Hi, kamran666,
If you purchased it used I would check if WiFi and GSM antennas are there and properly connected.
Take a look on this video from 2:33.
Hope in might help.
Hi,
Yesterday, I had an update from 4.1.1. to 4.1.2. I'm running the stock rom. After I ran in the update, I re-rooted using CF-Auto Root.
Today, I thought I'd do a factory reset. Now, my phone won't detect any SIM card (I've tried 2) and although it seems to detect my wifi, it won't connect.
I had the phone on airplane mode when I selected the factory reset, but I wouldn't have thought that would matter.
Interestingly, I can now select airplane mode to turn on, but it then ghosts out and I can't turn it off.
I have a Samsung Galaxy Note 2. Please help!
I'm inclined to think this is a software problem as both sim and wifi worked perfectly before the factory reset.
I've tried registering with SamMobile to download the stock rom, but their registration page seems to be wonky. It complains I haven't completed the anti-spam task, but this area of the form is just blank.
yep.. thats a loophole in google... try doing it again... this time with cwm.. if that doesnt work.. u have to get the stock rom via odin
---
Hit Thanks if I am helpful
Sent from my Samsung GT-I9505 using xda premium
naman4797 said:
yep.. thats a loophole in google... try doing it again... this time with cwm.. if that doesnt work.. u have to get the stock rom via odin
---
Hit Thanks if I am helpful
Sent from my Samsung GT-I9505 using xda premium
Click to expand...
Click to collapse
Do you mean this is a known problem then?
I've tried a few more resets with airplane mode on and off and nothings worked.
I don't have cwm at the moment although I could flash that. Where could I get the stock rom from though, besides SamMobile?
Thanks
paulschofield76 said:
Do you mean this is a known problem then?
I've tried a few more resets with airplane mode on and off and nothings worked.
I don't have cwm at the moment although I could flash that. Where could I get the stock rom from though, besides SamMobile?
Thanks
Click to expand...
Click to collapse
thats actually not a known problem... but seems unpredictable...
http://galaxynote2root.com/search/note 2 stock rom
check this site.. i would rather suggest u to get it from samfirmware by some means its the most trusted one..
---
Hit Thanks if I am helpful
Sent from my Samsung GT-I9505 using xda premium
naman4797 said:
thats actually not a known problem... but seems unpredictable...
http://galaxynote2root.com/search/note 2 stock rom
check this site.. i would rather suggest u to get it from samfirmware by some means its the most trusted one..
---
Hit Thanks if I am helpful
Sent from my Samsung GT-I9505 using xda premium
Click to expand...
Click to collapse
I just flashed the exact modem I had before, and my baseband, imei etc. are all coming up unknown.
When I enter *#1234#, my cp number is also unknown.
Do roms also include modems? I was once told they didn't. Sorry, I've never flashed anything before besides when I was getting root access
paulschofield76 said:
I just flashed the exact modem I had before, and my baseband, imei etc. are all coming up unknown.
When I enter *#1234#, my cp number is also unknown.
Do roms also include modems? I was once told they didn't. Sorry, I've never flashed anything before besides when I was getting root access
Click to expand...
Click to collapse
yes.. downloaded rom packages include modems..
naman4797 said:
yes.. downloaded rom packages include modems..
Click to expand...
Click to collapse
Thanks for all the replies.
One further question, then I'll go hunting ....
I have the GT-N7105T. I know the T variant has different radios. Some people say you can use N7105 roms and some people say no.
Can I safely use an N7105 rom on my N7105T? The phone is pretty useless at the moment but I'd rather not brick it.
Thanks
paulschofield76 said:
Thanks for all the replies.
One further question, then I'll go hunting ....
I have the GT-N7105T. I know the T variant has different radios. Some people say you can use N7105 roms and some people say no.
Can I safely use an N7105 rom on my N7105T? The phone is pretty useless at the moment but I'd rather not brick it.
Thanks
Click to expand...
Click to collapse
experimenting is good on android.. but i'd rather suggest u to get rom for YOUR MODEL only... if its not available at all.. then u could go for the second option...
---
Hit Thanks if I am helpful
Sent from my Samsung GT-I9505 using xda premium
There's your problem!
The difference between the regular Galaxy model and the T variant is the modem. Telstra 'tweak' it on a hardware level for their NextG network and it means that the performance of the modem is affected to varying degrees (severe in your case) if you use a non 'T' modem.
There should be a modems thread, there should be a N7105T modem. I'll have a look and post back if I find one.
---------- Post added at 09:37 PM ---------- Previous post was at 09:27 PM ----------
BOOM!
TDVDMB1 (Australia / Telstra) N7105TDVDMB2
TDVALK4 (Australia / Telstra) N7105TDVALK3
Either of these should work, keep them to flash after you reflash a rom onto your phone
good for u.. u got an australian to help u out..
---
Hit Thanks if I am helpful
Sent from my Samsung GT-I9505 using xda premium
I've tried flashing the modem but unfortunately it had no effect.
I don't have the phone on me so I can't confirm this, but I'm starting to have scary thoughts about the efs. Unfortunately the only changes I've ever made to my Androids was just to root, and I didn't even know what the efs was.
Thing is, after my update my phone worked fine for over 24 hours before I reset it. Does this sound like the efs? How can I tell if that's the problem?
I guess I had to learn somehow, and I've definitely learnt ...
Would it be possible for me to get a copy of an efs folder from another Note 2 and adapt it to mine?
For anyone else who may come across this, I solved the problem by downloading the stock ROM from sammobile and flashing that.
I have also now flashed TWRP and have taken a nandroid including the EFS.
We all have to start somewhere, but hopefully my bad experience will prevent someone else's.
This is a cmw flashable zip of the latest DMH1 modem for the n7100 for anyone who has updated to a DME6 rom and is stuck with no signal, no imei or a buggy modem...
This one seems to have fixed all issues for me. Before it used to be slow and speeds were all over the place. Now I get a steady speed when on wifi.
dhm1 is latest??
Sent from my AweSoMe ☆♥Note2♥☆
mannyvinny said:
dhm1 is latest??
Sent from my AweSoMe ☆♥Note2♥☆
Click to expand...
Click to collapse
Yes sir, according to SamMobile it was just posted the other day for the 4.1.2 Turkey and Slovakia updates.
Although I would only flash it if you're having problems currently. If you did not update and got stuck with DME6 modems do not flash it.
mazdamiata210 said:
Yes sir, according to SamMobile it was just posted the other day for the 4.1.2 Turkey and Slovakia updates.
Although I would only flash it if you're having problems currently. If you did not update and got stuck with DME6 modems do not flash it.
Click to expand...
Click to collapse
mh1 is the csc..it still carries mg1 build but turkey has got mf3 build
here's the pic from sammobile
Sent from my AweSoMe ☆♥Note2♥☆
mannyvinny said:
mh1 is the csc..it still carries mg1 build but turkey has got mf3 build
here's the pic from sammobile
Sent from my AweSoMe ☆♥Note2♥☆
Click to expand...
Click to collapse
There has to be changes because I used to get 3-4mbs on my wifi now I'm getting the full 35+ download
mazdamiata210 said:
There has to be changes because I used to get 3-4mbs on my wifi now I'm getting the full 35+ download
Click to expand...
Click to collapse
can u pls elaborate what do want to say
Sent from my AweSoMe ☆♥Note2♥☆
mannyvinny said:
can u pls elaborate what do want to say
Sent from my AweSoMe ☆♥Note2♥☆
Click to expand...
Click to collapse
This modem fixed my wifi problems.
mazdamiata210 said:
This modem fixed my wifi problems.
Click to expand...
Click to collapse
ok..btw is this the latest build after mg1?
Sent from my AweSoMe ☆♥Note2♥☆
@ What is it here for ****
CSC is not Baseband ( Modem is XXDMF1) in all Sammobile FW.
CSC is the Country...Hidden-senttings my Friend .
When you fix the other Modem ( Baseband) for the Note 2 and FW MG6 or MG1 than write not here is new Modem MH1....Ride.
The Problem with Imei is in MG6 and MF2 and finish.
mazdamiata210 said:
This modem fixed my wifi problems.
Click to expand...
Click to collapse
Modem has absolutely nothing to do with WiFi. WiFi is handling by the kernel and a different chip from the cellular connection.
Exactly, this one is misleading
MH1 is not modem but CSC, it still carries MF1 modem. If you refer according to number then still MG1 is latest modem. But still i don't recommend anyone to update it except this one is for your region. Likely you will get best result for network on your own regional baseband not on latest of other region.
i like that XDA brings both the most awesome and amazing knowledge base, and the stupidest ideas missing even the most basic knowledge of what some people are messing around with
If there's no changes in this modem then comparing the files should give the same results and what I am seeing is major differences in the two files... It might have the same build name but it is not the same modem. Also, I know the issues I was having with wifi and now I am not. The modem is the only thing that was changed.
http://prntscr.com/1om08x
I had 'not registered on network error' when moved from 4.3 test roms to some of custom 4.1.2 roms. After flashing this zip, phone functionality works fine without error.
Thanks for sharing.
Sent from my GT-N7100 using XDA Premium 4 mobile app
I tried the modem DMH1 but the baseband version code shows DMF1
it is normal?
mysterionTM said:
I tried the modem DMH1 but a base band version shows but the baseband version code shows DMF1
it is normal?
Click to expand...
Click to collapse
Yes
Sent from my GT-N7100 using xda app-developers app
mazdamiata210 said:
Yes
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
thanks for the timely response
you also know the reason?
in your opinion what's the best modem for Note 2 ?
mysterionTM said:
thanks for the timely response
you also know the reason?
in your opinion what's the best modem for Note 2 ?
Click to expand...
Click to collapse
The reason is the modem is not a DHM1 modem, it's from a DHM1 rom however it does have changes to it compared to a different DMF1 modem.
The best modem is any modem before DME6, but if you're stuck using something after that then this one seems to be ok for me.
mazdamiata210 said:
The reason is the modem is not a DHM1 modem, it's from a DHM1 rom however it does have changes to it compared to a different DMF1 modem.
Dr Ketan,
I need your help to solve this problem. My Imei is ok by the serial number has gone "0000000". I had network but could not dial of message anyone, in other words "No Mobile Network Connection". I used the Azira's Patch and now I am able to make calls. Is there any way to get back the serial number back on the phone, without screwing up the IMEI. All this happened after the stability update OTA from Samsung.
Please Help.
Thanks.
Click to expand...
Click to collapse
alienmaan said:
mazdamiata210 said:
The reason is the modem is not a DHM1 modem, it's from a DHM1 rom however it does have changes to it compared to a different DMF1 modem.
Dr Ketan,
I need your help to solve this problem. My Imei is ok by the serial number has gone "0000000". I had network but could not dial of message anyone, in other words "No Mobile Network Connection". I used the Azira's Patch and now I am able to make calls. Is there any way to get back the serial number back on the phone, without screwing up the IMEI. All this happened after the stability update OTA from Samsung.
Please Help.
Thanks.
Click to expand...
Click to collapse
also please quote how and when that happened and what build you are currently on.
it matters,
Click to expand...
Click to collapse