Related
I posted this in Q&A, but no replies led me to post here as well.
Hi. I've been using this Xoom for a couple weeks now, and just started having this problem yesterday.
Before I noticed the promblem I was on EOS 3 Wingman. I had TWRP 2.2.2.0 as recovery.
I wanted to give CM10 nightlies a shot. Downloaded the ROM and GAPPS through Goo. I tried to flash the CM10 ROM and GApps zip through the Goo interface. Xoom rebooted and instead of installing, I just got a contantly repeating error saying the install failed.
Eventually I rebooted the xoom and went into recovery. I tried to wipe data and it said it couldn't be mounted. Same error for wiping system, cache, etc...
Rebooted xoom and the EOS 3 rom was still working fine, I downloaded [Recovery] ClockworkMod 3.2.0.0 (R4c) Modded for Internal media [UPDATED 10/6]" and flash via adb. rebooted to recovery and tried wipe. same issue. nothing could be wiped. everything said "failure mounting <applicable partition>".
I tried flahing rogue recovery and got the same thing. I said screw it and rebooted back into EOS and it's been working fine. EOS was updated last night to 143, so i downloaded and tried to install through goo. I got the repeating errors again. Rebooted into recovery and still got the errors where it seems like none of the partitions are writeable.
I WAS able to install the EOS update directly through recovery.
Has anyone ever seen this behavior before and know how to fix it? I can't even export logs in the 2 CWM recoveries because they fail when trying to write the log file.
If I try to install an update through goo, it reboots to recover and just keeps scrolling "An Update Error has occured".
I can reboot to recovery and install the zip from there directly with no issue.
Here is the log for the failed data wipe...
I:mke2fs command: mke2fs -t ext4 -m 0 /dev/block/mmcblk0p10
mke2fs 1.41.12 (17-May-2010)
/dev/block/mmcblk0p10 is apparently in use by the system; will not make a filesystem here!
E:Unable to format data.
* Verifying filesystems...
I:=> Let's update filesystem types via verifyFst aka blkid, command: 'blkid'.
* Verifying partition sizes...
Ievice has /data/media
I:Total used space on /data is: 5122715648
I:Total in /data/media is: 3962468352
I:Actual data used: 1160247296
du: /data/media/.android_secure: No such file or directory|
once in recovery, if I try to format data, it says "Unable to format data". Log
Well I can't help, I'm in the same boat...hoping to get some insight from any responses you might get.
grey.ghost said:
Well I can't help, I'm in the same boat...hoping to get some insight from any responses you might get.
Click to expand...
Click to collapse
It's extremely unusual to get no responses to an issue like these here at XDA. leads me to believe it might be a very uncommon problem. The folks here are usually on the ball about any issue that has even arisen before.
That being said, I am going to try to flash the stock RUU back on from this link...
http://developer.motorola.com/produ...utm_source=supportforums&utm_term=unlockboard
After I finish, I re-root/unlock.
I'll let you know how it goes.
I'll let you know if I come up with something as well. So far I've managed to erase the sd card and maintain a constant boot loop.
Flashing all of the stock img, relocking, and unlocking again didn't do ****.
Found an original MZ600 SBF, which is what I need for verizon 3g xoom, I'm installing this via RSD Lite to see if it blows away whatever is causing the issue.
I was able to wipe the entire system and use adb to repeat the unlock and root steps. So far so good. I'm using the CWM 3.2.0.0 recovery image right now though. I have at least been able to get into a clean copy of a ROM and no bootloops yet. Can't restore data off old Nandroids, so I'm about to update to the newer CWM based recovery image and see if that will help.
I think I'm OK now.
I installed the SBF. Let all of the OTA updates come in including the ICS update where my 3g stops.
flashed the ROGUE recovery from fastboot.
I was able to format all partitions and install and boot CM9 nightly.
Me too, i was sweating hard for a bit, but was able to go through the entire process from stock, unlock, root, rogue recovery and then flashed CNA. Got that working without boot loops or fc and then advance restored data from a previous nandroid through rogue to get it back. A couple of apps had to be redownloaded from the market, but it looks as if I'm back in business. I want to try TWRP, but every time I do something screws up, so I think I'll stop trying.
Thanks for the help.
grey.ghost said:
Me too, i was sweating hard for a bit, but was able to go through the entire process from stock, unlock, root, rogue recovery and then flashed CNA. Got that working without boot loops or fc and then advance restored data from a previous nandroid through rogue to get it back. A couple of apps had to be redownloaded from the market, but it looks as if I'm back in business. I want to try TWRP, but every time I do something screws up, so I think I'll stop trying.
Thanks for the help.
Click to expand...
Click to collapse
Are you installing Twrp from goo manager. Cause I have not had any issues with the goo manager download. But did have issues with the zip file here on xda. I dont kknow if it is worth a try but that is how I did it.
Sent from my Xoom using xda app-developers app
Well sense this is a twrp related issue I would think u would have asked in my thread where I released the port for twrp to Xoom,
Having said that, at one point n time there was a note n the open about open script recovery. But its is also buried in the thread too. So I will answer your question and also presume a few things... and please correct me if I am wrong anywhere.
Once u set the download path in goo app to /data/media/goomanager/ and downloaded a ROM, clicked flash ROM, and entered recovery once u saw all the E/ update error u manually rebooted the Xoom and did not let the script finish installing the ROM? If I am correct that so far. That's what cause your additional problems. You basically rebooted recover while mid install of a ROM.
Now as stated it the twrp thread for Xoom, these errors are false errors and should be ignored. To add it the reassurance that they are intact false errors, from goo app select to flash a ROM again and simple allow the script to finish and then the tablet will reboot on its own when it is finished with the script. And you will be greeted with your new ROM you just successfully flashed.
Again let me know if I am wrong on assuming you forced a reboot mid install ( aka while u saw all the errors)
Sent from my Nexus 7 using Tapatalk 2
runandhide05 said:
Well sense this is a twrp related issue I would think u would have asked in my thread where I released the port for twrp to Xoom,
Having said that, at one point n time there was a note n the open about open script recovery. But its is also buried in the thread too. So I will answer your question and also presume a few things... and please correct me if I am wrong anywhere.
Once u set the download path in goo app to /data/media/goomanager/ and downloaded a ROM, clicked flash ROM, and entered recovery once u saw all the E/ update error u manually rebooted the Xoom and did not let the script finish installing the ROM? If I am correct that so far. That's what cause your additional problems. You basically rebooted recover while mid install of a ROM.
Now as stated it the twrp thread for Xoom, these errors are false errors and should be ignored. To add it the reassurance that they are intact false errors, from goo app select to flash a ROM again and simple allow the script to finish and then the tablet will reboot on its own when it is finished with the script. And you will be greeted with your new ROM you just successfully flashed.
Again let me know if I am wrong on assuming you forced a reboot mid install ( aka while u saw all the errors)
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
No, after pushing the TWRP recovery to the Xoom using adp, I would clean install a ROM and get one of two results....1) the ROM would run for a few seconds and then reboot, or 2) the ROM would run, but everything would fc. Fixing permissions, wiping everything, etc., wouldn't help the issue. No matter what I tried under TWRP, those were the results. I ended up having to start from scratch to negate whatever it was that was making the xoom go funky. Once I pushed rogue and followed the same process, I was back in business.
Sent from my Xoom using Tapatalk 2
Hi All,
I have posted this on the GooManager thread but there hasn't been much activity there recently so asking here as well. Noob question on GooManager...I have the AOKP rom installed on my Sensation and GooManager notifies me of updates to my ROM every now and then. I just want to know if updating my ROM build with GooManager will reset all my custom ROM settings and preferences or will they all be preserved? I'd like to keep my ROM up to date but if it means spending all the time again to setup my preferences and icons/widgets/home screens etc. then I'd rather stick with what I have.
TIA!
I'd recommend to use GooManager only to download the newest ROM and flash it from recovery.
I asume you're using AOKP Swagger from frankenstine, the same I use.
I just download the update from GooManager, boot to recovery, flash ROM, gapps and 4.2 stuff and are ready to go.
All my settings are their after updating - only AdAway needs a reconfiguration and a reboot (and I need to set my alarm clock since I'm overwriting that). Basically you keep all your settings except those you made to the kernel.
Regards
lolmachine4 said:
I'd recommend to use GooManager only to download the newest ROM and flash it from recovery.
I asume you're using AOKP Swagger from frankenstine, the same I use.
I just download the update from GooManager, boot to recovery, flash ROM, gapps and 4.2 stuff and are ready to go.
All my settings are their after updating - only AdAway needs a reconfiguration and a reboot (and I need to set my alarm clock since I'm overwriting that). Basically you keep all your settings except those you made to the kernel.
Regards
Click to expand...
Click to collapse
Oh perfect, yes indeed I am using that exact ROM.
OK so when I boot to recovery, I shouldn't do any wiping? Just simply flash the new file? Will the updated gapps package be in the download I get from GooManager?
freddysensation said:
Oh perfect, yes indeed I am using that exact ROM.
OK so when I boot to recovery, I shouldn't do any wiping? Just simply flash the new file? Will the updated gapps package be in the download I get from GooManager?
Click to expand...
Click to collapse
I only wipe dalvik & cache after each update.
I can't say something about what GooManager downloads as "gapps", I use some I downloaded some weeks ago + some old version of 4.2 stuff. I might need to update my flash-setup too
lolmachine4 said:
I only wipe dalvik & cache after each update.
I can't say something about what GooManager downloads as "gapps", I use some I downloaded some weeks ago + some old version of 4.2 stuff. I might need to update my flash-setup too
Click to expand...
Click to collapse
Thanks lolmachine, for the benefit of anyone who might have the same question as me the following worked:
- Downloaded latest build of my AOKP Rom via GooManager
- Downloaded latest gapps package for my ROM via GooManager
- Boot to Recovery
- Flash new ROM file and then gapps package
- Restart.
My only question is, I didn't wipe davlik and cache so should I, and what difference does it make if I don't?
I used Goo the other day to flash, ummm, bugger, can't remember if it was an update or a new rom.
Oh now I remember, the latest one was an update to Bruce's Rom. I do believe when I tapped flash rom it booted to recovery (the one it installs) and I may have had to select "Install" from there, don't think so though. Either way, I used Goo to handle the install.
I didn't do a wipe. From what I've picked up, wiping is a good way to cover your butt. So if you're having issues and didn't wipe, you go back and do it all again with a wipe. Doing the wipe to start with means you can eliminate those types of issues from the start.
Someone can correct me if I'm wrong (which I probably am )
Hi there, I also received an update to my ROM via Goo Manager. It is CyanogenMod 10.1 by Albinoman887 for my HTC Sensation XE. I am using the EXT4 bootloader. I just installed it a few nights ago so I am completely new to rooting. My question is that there is no option to wipe dalvik cach. EXT4 just says wipe cache, wipe data and wipe system. Does wipe cache wipe dalvik cache as well. Also do I need to re-flash gapps as well after updating and will this wipe my gmail accounts etc?
Thanks,
Adam
thisisadamh said:
Hi there, I also received an update to my ROM via Goo Manager. It is CyanogenMod 10.1 by Albinoman887 for my HTC Sensation XE. I am using the EXT4 bootloader. I just installed it a few nights ago so I am completely new to rooting. My question is that there is no option to wipe dalvik cach. EXT4 just says wipe cache, wipe data and wipe system. Does wipe cache wipe dalvik cache as well. Also do I need to re-flash gapps as well after updating and will this wipe my gmail accounts etc?
Thanks,
Adam
Click to expand...
Click to collapse
You want to select "wipe dalvik+cache" option when you flash an update.
There's no need to flash gapps after a ROM update.
Sent from my Ouya
AndroidSupporter318 said:
You want to select "wipe dalvik+cache" option when you flash an update.
There's no need to flash gapps after a ROM update.
Sent from my Ouya
Click to expand...
Click to collapse
Thanks very much, downloading it now.
Help
im using albinoman's jelly bean rom
excuse me for noob doubts but
1) goo manager shows i have an update, so ive downloaded it. its a zip just like the rom n not just a small update. i have downloaded it now what should i do?
2) if i have to go to the recovery and flash the zip then i have to wipe only the cache right? Im using 4ext recovery.
3) will all my apps get uninstalled? what about the app data?
4) what about gapps? i have a gapps zip file, will i have to flash it again after the update?
Please reply thanks
I finally rooted phone after silly VMUNE7 thing on Verizon but after I get the install openrecoverscript and hit reboot recovery it does not go to teamwiz bootload instead I get something with a green driod on the bottom saying downloading but above it saying in red can't download Odin mode?? Please help I want to run cleanrom for better battery and less bloatware and keep my touchwiz. :crying:
all3rd said:
I finally rooted phone after silly VMUNE7 thing on Verizon but after I get the install openrecoverscript and hit reboot recovery it does not go to teamwiz bootload instead I get something with a green driod on the bottom saying downloading but above it saying in red can't download Odin mode?? Please help I want to run cleanrom for better battery and less bloatware and keep my touchwiz. :crying:
Click to expand...
Click to collapse
sorry man but i think you are talking for a samsung device am i right?
if yes then this is only for sensation/XE/4G devices
yasho170 said:
im using albinoman's jelly bean rom
excuse me for noob doubts but
1) goo manager shows i have an update, so ive downloaded it. its a zip just like the rom n not just a small update. i have downloaded it now what should i do?
2) if i have to go to the recovery and flash the zip then i have to wipe only the cache right? Im using 4ext recovery.
3) will all my apps get uninstalled? what about the app data?
4) what about gapps? i have a gapps zip file, will i have to flash it again after the update?
Please reply thanks
Click to expand...
Click to collapse
Simple.
Go to recovery.
For s-on you must enable smartflash.
Do a nandroid backup.
Dirty flash the update (meaning flash over the previous rom without wiping).
Dirty flash gapps (signed only).
Wipe cache + dalvik.
Reboot.
If it can't boot/run properly then you can just restore the backup or do a clean flash.
First off I'm not experienced in any way, got my Sensation unlocked, rootet and installed Sultanxda's 4.4.2 ROM for sensation. I'm on S-On, too, if anyone wonders.
Updating didnt affect my apps as far as I can tell. Everything seems to be the way as before and everything seems to be working.
What I did was download the ROM manually since the download with goomanager didn't work. I downloaded gapps as backup because I didnt have the zip on my SD, just in case anything would go wrong.
You only need to boot into recovery, with S-On make sure smartflashing or something like that is on, select the zip, flash it and then select wipe cache +dalvik.
It's pretty much what AndroidSupporter318 wrote, just wanted to give feedback and say what I did in detail in case anyone was still wondering.
LxMaD
I guaranted 4EXT Recovery for this type of problem. U don't need to boot into recovery and work with 4ext is very simple.
about a week ago i updated to the newest cm10.1 nightly with gapps 4.2. after flashing those i tried to flash leankernel. my battery was low and the phone turned off when rebooting after the leankernel flash. since then i cannot flash any kernel. i have to do a battery pull to get back into cwm recovery. once in recovery i can wipe data and reinstall cm 10.1 with the standard kernel. i have tried just about every combo of wiping cache, davlik, fix permissions. still not able to flash any kernel. could it have something to do with gapps 4.2 or the phone shutting off mid flash? if so does anyone know how to repair? i already flashed back to stock and rerooted re-unlocked, etc. thanks
and to clarify , it was gapps 4.2.2
Ive found that 3.4 based kernels work with some roms and not with others.
try an older build date its likely not 3.4 based.
or, if your trying a non 3.4 kernel and it wont boot, try a 3.4 kernel.
If you're trying to flash LeanKernel, what's the zip file you're attempting to flash? Also, what are you wiping prior to flashing the kernel?
Sent from my SCH-I535 using xda app-developers app
i tried the mastamoon 3.4 kernel with no luck . the rom i amrunning is the cm-10 nightly 2013-03-24. the leankernel version i am running is lk_s3vzw_aosp_jb42-v2.9. i wipe cache then wipe davlik then flash, it always worked with that procedure before, but since the problem i have tried wiping both after along with fixing permissions. before this issue it was simple as pi, wipe cache, davlik, flash, reboot .
You could always try twrp. Ha. It would make no sense why you couldn't install a kernel.
I would assume since you went back to Odin stock. It would flash factory kernel and give you a clean slate.
So unless cwm is outdated.... ?
Sounds very weird.
actually that is another variable that i didnt think of. cwm updated from 6.0.1 to 6.0.3 or something like that. but then again the original recovery i used after the clean slate was the ez recovery which used 6.0.1 stupid question, but how does twrp work? i always used cwm. i tried flashing twrp but cwm came up when i went to recovery when i tried using twrp?! that was before i did a stock recovery so it couldnt be possible that i am running both? should i delete cwm before i use twrp? if so how? if you dont feel like going into that much detail, i can search it.
i figured out twrp. never gave it achance. ill see if that does the trick
tried twrp. still the same thing going on. gonna go to bed now. ill check back tomorrow after work to see if there are any more ideas. thanks
Problem solved. I went into my internal SD via astro and deleted all old traces of cwm as well as ez unlock and ez recovery. I was getting a generic (showed setting icon instead of regular su icon)super user screen come up prior to that, after deleting those files the regular super user came back. Rebooted into recovery via twrp , cleared cache, Davlik, flashed lean kernel and it worked. What do you think the issue was? Lingering files from ez recovery? That weird su thing?
I decided recently, with the release of towelroot, to root my Transformer. I was having performance problems since the Jellybean update, but the optimizations I installed improved it. There was still some lag though, so I tried to flash a Cyanogenmod 11 nightly. There were no errors from CWM, but the tablet stalked at the bout animation. I tried an OmniROM homemade, same story. I flashed the newest OmniROM nightly, the GApps package listed on the OmniROM thread on here, and the US_epad-user-10.6.1.27.5 kernel, no soap. I can get Windows to detect the tablet when CWM is in sideload mode, but fastboot never connects, so I can't flash another recovery.
Sent from my Droid Ultra
What version of CWM you are using ?
Maybe you should update it via a flashable zip (no need to pc)
And a good advise, always wipe cache & dalvik cache after flashing rom and before reboot.
I'm using 6.0.4.7. I've been using a jump drive plugged into the dock to load ROMs, so I haven't connected directly to the computer for a while. I've wiped cache and dalvik before flashing nearly every time, and after several times.
Sent from my XT1080 using XDA Premium 4 mobile app
Ok if you still have the OmniROM image, try to flash it exactly as follow :
1- Wipe system, data, cache and dalvik cache
2- install OmniRom
3- install gapps
4- install kernel
5- wipe again cache and dalvik cache before reboot
6- reboot
Download links for latest gapps and kernel are in my signature (Geass is the best kernel IMO)
OK, I'll give it a shot. Probably ten minutes.
Sent from my Droid Ultra
Whenever I try to format /data, it says Error mounting /data! Would this be part of the trouble, perhaps?
It's all flashed, but it looks like it hung up during the boot sequence again. I'll let it sit a while longer, and see what happens.
OK, it did absolutely nothing. I haven't worked on it for a while, because between work and the rest of life, I haven't really needed it. It is the same state, though.
travisw495 said:
OK, it did absolutely nothing. I haven't worked on it for a while, because between work and the rest of life, I haven't really needed it. It is the same state, though.
Click to expand...
Click to collapse
Look up buster99's fix. I think that is what you need to do next.
so i had been running my nexus 5 with cataclysm ROM for a while.,today i decided to do a cm12 nightly flash ...i worked well it booted fine, everthing worked well ,flashed gapps ,tibu,restored my apps .now after a reboot i kept getting "system uid inconsistent " errors.I (like a idiot) tried "fix permissions "in TWRP which resulted in a boot loop.so i decided to flash cataclysm rom freshly again.It worked well but now sometimes i get force close errors like "android.process.acore" and sometime google playstore force closes.
i am scared i might have spoiled something,
also the cm12 nightly reflashed bootloader as it was 5.0.2 and also radio ,do these things cause something to break??
how do i return to normal??
I have updated my Radio while I am still using Cataclysm and I didn't face any of the problems you mentioned above. I have also switched from Cataclysm to other ROMs (including CM12) and back couple of times in between and never faced any problems.
I generally wipe everything except Internal Memory when switching ROMs. Did you do the same?
Yes,its a clean flash.
Just a question has this got something to do with the "fix permission" thing I did in TWRP?
Even though I wiped and flashed cataclysm later??
Also I googled around .does a corrupt data partition cause these kind of errors to pop up??
Currently the occurrence of these errors is rare but I've notice reccurent notifications from google playbooks even after I remove the notifications they reappear after some time .
I've decided to use my nexus 5 for a while and see if the problems are reproducible .
But I feel like the only wrong thing I did was "fix permission " in TWRP other than that its was just regular ROM flashing.
Yes... a corrupt data partition might cause this.
Generally I wipe the following when I am flashing a new ROM:
Dalvik Cache
System
Data
Cache
As you see I wipe data as well when I am moving to completely different ROM.
Does that mean my device is not fit for flashing new Roms anymore.?
How can I fix my data partition to be as good as new??
No... What I meant was to wipe the Data partition as well before flashing a new ROM. Wipe all the partitions except the Internal Storage partition. (Note: Data and Internal Storage are not the same)
If that still doesn't work, try flashing the factory image to rollback to stock. Then again flash the recovery and try flashing a custom ROM.
You might try just reflashing the CM12 nightly and see if that fixes it. Otherwise you'll have to flash from fresh. I wouldn't recommend doing a full backup restore if possible.